EDIT: See bottom of post
Hello everyone, and thanks for taking the time to attempt to help me.
Earlier today, my T-Mobile Galaxy S5 updated to 5.1.1. I searched google and came across a few links on how to root my phone (G900T) - The one I ended up using was CF-AutoRoot
I used Odin 3.07, used the tar5 file from that site above where I downloaded the root, and attempted to root the phone. Odin says everything worked as planned ''passed'' was displayed with 0 fails. I waited about 20 minutes, but my phone never rebooted, it was stuck in a boot logo loop ' 'Samsung Galaxy S5 powered by Android'' or ''T-Mobile'' was displayed.
I tried going into recovery and reseting all data / factory wipe but that didn't help, and made it even worse. Now my phone says this when I try to turn it on: ''Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again''
How do I go about getting back to stock firmware , that is rootable, so I can then proceed to install CyanogenMod?
EDIT: I used Kies and was able to get back to stock firmware and the phone turns on.
Can anyone recommend a reliable root for the G900T S5?
FreakLikeChewy said:
EDIT: See bottom of post
Hello everyone, and thanks for taking the time to attempt to help me.
Earlier today, my T-Mobile Galaxy S5 updated to 5.1.1. I searched google and came across a few links on how to root my phone (G900T) - The one I ended up using was CF-AutoRoot
I used Odin 3.07, used the tar5 file from that site above where I downloaded the root, and attempted to root the phone. Odin says everything worked as planned ''passed'' was displayed with 0 fails. I waited about 20 minutes, but my phone never rebooted, it was stuck in a boot logo loop ' 'Samsung Galaxy S5 powered by Android'' or ''T-Mobile'' was displayed.
I tried going into recovery and reseting all data / factory wipe but that didn't help, and made it even worse. Now my phone says this when I try to turn it on: ''Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again''
How do I go about getting back to stock firmware , that is rootable, so I can then proceed to install CyanogenMod?
EDIT: I used Kies and was able to get back to stock firmware and the phone turns on.
Can anyone recommend a reliable root for the G900T S5?
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
It's good to hear that you managed to revive your phone. Many of us find it convenient to install a custom recovery such as TWRP which makes backing up and restoring, switching ROMs, and many such activities much easier. XDA happens to have an active and friendly area dedicated to the Samsung Galaxy S5, and specifically to the T-Mobile version at http://forum.xda-developers.com/tmobile-galaxy-s5. I suggest you search that area or simply post your question in the Q&A forum there at http://forum.xda-developers.com/tmobile-galaxy-s5/help where our experts will be most likely to be able to guide you.
So I tried to root my Samsung Galaxy S6 today using TWRP and it got stuck in a boot loop. I went to wipe to cache and accidentally wiped to system. So now there is no OS installed. I know I need to somehow put an OS on the device but I'm in Canada and when I go to samsung's site to download the firmware, there is no Canada option. I bought the phone off of amazon and it came with a European wall charger because it was imported, but how do I know what firmware to download?
Also, when I have found the right firmware, how do I flash it onto the device? I can no longer access TWRP, all I can get is the downloading screen thing. Can I use Odin/how do I use Odin?
Somebody help me I'm panicking because I broke my brand new phone!
You should check the Amazon listing to see which model number you have. It's probably SM-920F.
Once you have the correct firmware downloaded, Google a guide to flashing Galaxy S6 firmware with Odin. There are a lot of them out there.
krisztiana said:
So I tried to root my Samsung Galaxy S6 today using TWRP and it got stuck in a boot loop. I went to wipe to cache and accidentally wiped to system. So now there is no OS installed. I know I need to somehow put an OS on the device but I'm in Canada and when I go to samsung's site to download the firmware, there is no Canada option. I bought the phone off of amazon and it came with a European wall charger because it was imported, but how do I know what firmware to download?
Also, when I have found the right firmware, how do I flash it onto the device? I can no longer access TWRP, all I can get is the downloading screen thing. Can I use Odin/how do I use Odin?
Somebody help me I'm panicking because I broke my brand new phone!
Click to expand...
Click to collapse
On the back of the phone it should say which model you have, for example G920F, G920W8, G920P etc.
Download the proper firmware from Sammobile, then follow the tutorial that the following thread has a link to.
http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
If the variant you have is the European model, G920F, I recomend you install the unbranded firmware.
IMPORTANT! MAKE SURE YOU HAVE THE PROPER FIRMWARE! INSTALLING THE WRONG FIRMWARE CAN HARD BRICK YOUR DEVICE!
I really hope this advice helped!
Really important is only that you pick the right model to download. The region isn't that important. Go to sammobile and download your stock rom, but be sure to not pick a branded one, because they are full of junk.
Also, you must use ODIN in that Download-Mode. Open ODIN, plug your device into your pc and see, if ODIN shows up your device. If yes, select "PDA" or "AP" (depending on ODIN Version) and select your ROM that you have downloaded. Then click on start. Don't touch your phone, your cable or your computer for best results. Wait ODIN say "PASS" with a green background. If this occurs, your phone should restart and after 10 mins or so, it should boot Android.
I did the same this as the OP, now I am stuck on the main "Samsung Galaxy S6 Edge Powered by Android" screen. I can boot into TWPR and into download. I have tried flashing zip from external SD card with USB-OTG with no luck, I have tried flashing from Odin, multiple Odin versions tried, multiple usb cords tried, multiple computers tried.. all result with <ID:x/xxx> Can't open serial(COM) port."
No matter what I do, I can't seem to get anything to take, not stock firmware or otherwise. Any suggestions.. donations for anyone who can help me solve. lol $$
dwall87 said:
I did the same this as the OP, now I am stuck on the main "Samsung Galaxy S6 Edge Powered by Android" screen. I can boot into TWPR and into download. I have tried flashing zip from external SD card with USB-OTG with no luck, I have tried flashing from Odin, multiple Odin versions tried, multiple usb cords tried, multiple computers tried.. all result with <ID:x/xxx> Can't open serial(COM) port."
No matter what I do, I can't seem to get anything to take, not stock firmware or otherwise. Any suggestions.. donations for anyone who can help me solve. lol $$
Click to expand...
Click to collapse
i'm in the same situation , stuck in bootloop for the last 3 days ive tried everything on youtube and forums , with odin with smart swich with kies with twrp , nothing , same bootloop everytime. don'tknow what to do .....
get the model number of your phone and flash the latest firmware through Odin
Milian90 said:
i'm in the same situation , stuck in bootloop for the last 3 days ive tried everything on youtube and forums , with odin with smart swich with kies with twrp , nothing , same bootloop everytime. don'tknow what to do .....
Click to expand...
Click to collapse
In odin under options untick Auto Reboot.
Flash Rom
Phone wont reboot once rom has flashed successfully so you will need to do manual reboot.
Go into recovery mode and wipe data.
Reboot phone
that should help let us know if it works
wifi wont turn on
hi, i managed to install the firmware but now the wifi and bluetooth wont turn on, wifi toggle and bluetooth wont go on, it looks like is trying toget on but after 20 seconds justgo back to off. idont know what to do .........
I can't even get any firmware to load as odin continually stops within seconds of starting to flash phone, no matter what firmware I choose it's the same result failed flash?
First my phone was rooted before this but I tried to install XPOSED but it didint work it had me doing a bootloop so i thought about wiping my phone and didint think my OS would get erased now my phone just stays at the SAMSUNG GALAXY S6 screen I installed TWRP but no luck there people told me to install that but no luck I hope I can get some help ive tried to install stock firmware with odin but it keeps saying FAIL please help!
bump
Here are official firmwares for your device. Boot your device into download mode and connect your phone, it should show up in Odin, then select the file you downloaded from sammobile and flash it from there. If you get any errors, please post the log here and I'll take a look at it.
Hi Guys i need help, i am trying to figure this out but i am not getting any luck.
The tablet has working fine with the stock firmware it has the 4.0.4 one day the battery runs out and when i try to boot up after battery load the tablet stays on the samsung logo until the battery runs out.I have try to enter in recovery mode but it failed back to samsung logo, i can enter in download mode only.
Can some one give a link to download de firmware version 4.0.4, i have try the latest version 4.4.2 with odin but it stil stuck on the samsung logo.
If the version 4.0.4 or the latest 4.4.2 do not work, maybe is an emmc problem but i am not sure.
Regards,
Diogo.
DE German firmware .
Not see any 4.o4 on sammobile .
Hi,
In Sammobile portal do not have this older version i cannot find any were in the web, the links are all dead.
Can some one help me find this older stock rom?
hi, any solution??
Yes as posted multiple times .
Flash stock firmware .
The same happends to me. The tablet stucks on "Samsung Galaxy Note 10.1" logo and a "stop-clock" icon appears when it's charging. I can't access to Recovery Mode, only to ODIN mode.
With ODIN I tried to flash several ROMS, including the STOCK ROM from several countries, and no one works. I change the recovery, the bootloader, the rom, and everything that I thougt, but nothing works. In ODIN, appears to success, but really not.
Someone solve it?
I bought a used samsung s7 Sm-G930F but after using the phone for some days i saw an update release so i decided to update it but after download the update it couldnt install it due to some error i dont know is talking of. So after some days to went off and it couldnt come on. So i decided to flash the firmware BTU on it through odin3 but after get PASS in odin3 it keeps gets stuck on SAMSUNG. I have also try factory reset wipe cache before even doing the firmware flash. Also i try downgrading to 7.0 and 6.0 but didnt work. Please help am guessing am missing something. I also notice something when even i boot the phone in recovery mode and plug to my system, my system recognise as SM-G930S, while at the back is written SM-G930F. Pls provide with any possible solution to this issue.
Used phones are often rebranded as other models to try increase resale value. If it says G930S in download mode then that's the phone you have. If you tried flashing G930F software you've probably soft bricked it.
You could try flashing again but using G930S software.
Beanvee7 said:
Used phones are often rebranded as other models to try increase resale value. If it says G930S in download mode then that's the phone you have. If you tried flashing G930F software you've probably soft bricked it.
You could try flashing again but using G930S software.
Click to expand...
Click to collapse
Thanks for quick respond. In download it says Sm-g930f.but if i plug it to a system in recovery mode it shows as Sm-g930s. So am really confuse. And 8 have flash it with Sm-g920f firmware several times it keeps getting stuck on samsung logo sometimes it even load up to where i start setup with googke account and alk that but getting stuck again and couldnt respond at all.