Hi Guys i need help, i am trying to figure this out but i am not getting any luck.
The tablet has working fine with the stock firmware it has the 4.0.4 one day the battery runs out and when i try to boot up after battery load the tablet stays on the samsung logo until the battery runs out.I have try to enter in recovery mode but it failed back to samsung logo, i can enter in download mode only.
Can some one give a link to download de firmware version 4.0.4, i have try the latest version 4.4.2 with odin but it stil stuck on the samsung logo.
If the version 4.0.4 or the latest 4.4.2 do not work, maybe is an emmc problem but i am not sure.
Regards,
Diogo.
DE German firmware .
Not see any 4.o4 on sammobile .
Hi,
In Sammobile portal do not have this older version i cannot find any were in the web, the links are all dead.
Can some one help me find this older stock rom?
hi, any solution??
Yes as posted multiple times .
Flash stock firmware .
The same happends to me. The tablet stucks on "Samsung Galaxy Note 10.1" logo and a "stop-clock" icon appears when it's charging. I can't access to Recovery Mode, only to ODIN mode.
With ODIN I tried to flash several ROMS, including the STOCK ROM from several countries, and no one works. I change the recovery, the bootloader, the rom, and everything that I thougt, but nothing works. In ODIN, appears to success, but really not.
Someone solve it?
Related
Hello,
I just updated the firmware of my brand new Note 10.1 (N8000) using Kies, which seems to have failed - I can't even turn the device off. I'm a quite experienced computer user, but brand new to Android. Any help or feedback would be very much appreciated (esp. how I can at least turn off the device).
Problem Description:
I have a new Note 10.1 (a German device/I'm in Germany using the Vodafone network, but I guess that shouldn't matter) and installed Kies today. The application identified a new firmware and suggested an update, which I did via USB. Everything appeared to have gone all right - the file got downloaded, transferred to the device, which then showed that it was installing the updates (something like 95 items). No error message. The device then booted, and that's where it seems to be stuck: since then, the device is in an endless loop: Screen is black, a swirling animation comes up, than the Samsung Logo, which stays for like 12 seconds, the screen goes black and it starts from the beginning (in total the loop takes like 15 secondes). Kies cannot connect to the device, and I can't even turn it off, it's just stuck in this endless loop.
Before the update, the device was neither modified nor rooted (I only installed a few apps), and there was no error message during the update (at least none that I saw).
Can anyone help???
Get the firmware file from sammobile and flash with odin. You can find a lot of how to regarding Odin, just do a search and you will find a movie or tutorial.
Here is the fw
http://www.hotfile.com/dl/178817278/616d7ef/N8000XXBLJ9_N8000OXABLJ9_DBT.zip.html
The link is from sammobile, not a mirror, so it's safe.
Or you could just return it for an exchange.
Sent from my GT-N8010 using Tapatalk 2
To turn off, just press power until it turns off (about 10 seconds)...
Kies firmware failed N8010
ultramag69 said:
To turn off, just press power until it turns off (about 10 seconds)...
Click to expand...
Click to collapse
Hi there, I have the same problem but with N8010, after firmware update witch FAILED , my N8010 shows .... Firmwareas encountered an issue , Try to recover with Kies...
No way to recover with Kies, I've tryied with Odin flashing the original firmware Ics 404 " Odin flash PASSED, N8010 restart after flashing first start " Samsung note 10.1.. " but no going further it statck ther, I flashed again in Odin Jb 4.1.2 ... Odin Pass, N8010 reboot , Samsung note 10.1 go further Sound and Samsung logo come up but it stack there, I can not turn my N8010 off, if I push the Power botton it reboot again and stack after the souns and Samsung logo!!!
I can enter in Download mode for flashing again but can not get my N8010 further , Please HELP!! " dont know what to do .
ThankYou in advantage
Greetings
Joey
EagleTalon1 said:
Hi there, I have the same problem but with N8010, after firmware update witch FAILED , my N8010 shows .... Firmwareas encountered an issue , Try to recover with Kies...
No way to recover with Kies, I've tryied with Odin flashing the original firmware Ics 404 " Odin flash PASSED, N8010 restart after flashing first start " Samsung note 10.1.. " but no going further it statck ther, I flashed again in Odin Jb 4.1.2 ... Odin Pass, N8010 reboot , Samsung note 10.1 go further Sound and Samsung logo come up but it stack there, I can not turn my N8010 off, if I push the Power botton it reboot again and stack after the souns and Samsung logo!!!
I can enter in Download mode for flashing again but can not get my N8010 further , Please HELP!! " dont know what to do .
ThankYou in advantage
Greetings
Joey
Click to expand...
Click to collapse
I'm having the same issue!!!!!
Kies failed! Odin PASS and stuck in the logo!, it doesnt boot!
You may need to go into recovery and wipe data/cache partition. This will wipe your internal memory of everything but you will get an operational note...
So I tried to root my Samsung Galaxy S6 today using TWRP and it got stuck in a boot loop. I went to wipe to cache and accidentally wiped to system. So now there is no OS installed. I know I need to somehow put an OS on the device but I'm in Canada and when I go to samsung's site to download the firmware, there is no Canada option. I bought the phone off of amazon and it came with a European wall charger because it was imported, but how do I know what firmware to download?
Also, when I have found the right firmware, how do I flash it onto the device? I can no longer access TWRP, all I can get is the downloading screen thing. Can I use Odin/how do I use Odin?
Somebody help me I'm panicking because I broke my brand new phone!
You should check the Amazon listing to see which model number you have. It's probably SM-920F.
Once you have the correct firmware downloaded, Google a guide to flashing Galaxy S6 firmware with Odin. There are a lot of them out there.
krisztiana said:
So I tried to root my Samsung Galaxy S6 today using TWRP and it got stuck in a boot loop. I went to wipe to cache and accidentally wiped to system. So now there is no OS installed. I know I need to somehow put an OS on the device but I'm in Canada and when I go to samsung's site to download the firmware, there is no Canada option. I bought the phone off of amazon and it came with a European wall charger because it was imported, but how do I know what firmware to download?
Also, when I have found the right firmware, how do I flash it onto the device? I can no longer access TWRP, all I can get is the downloading screen thing. Can I use Odin/how do I use Odin?
Somebody help me I'm panicking because I broke my brand new phone!
Click to expand...
Click to collapse
On the back of the phone it should say which model you have, for example G920F, G920W8, G920P etc.
Download the proper firmware from Sammobile, then follow the tutorial that the following thread has a link to.
http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
If the variant you have is the European model, G920F, I recomend you install the unbranded firmware.
IMPORTANT! MAKE SURE YOU HAVE THE PROPER FIRMWARE! INSTALLING THE WRONG FIRMWARE CAN HARD BRICK YOUR DEVICE!
I really hope this advice helped!
Really important is only that you pick the right model to download. The region isn't that important. Go to sammobile and download your stock rom, but be sure to not pick a branded one, because they are full of junk.
Also, you must use ODIN in that Download-Mode. Open ODIN, plug your device into your pc and see, if ODIN shows up your device. If yes, select "PDA" or "AP" (depending on ODIN Version) and select your ROM that you have downloaded. Then click on start. Don't touch your phone, your cable or your computer for best results. Wait ODIN say "PASS" with a green background. If this occurs, your phone should restart and after 10 mins or so, it should boot Android.
I did the same this as the OP, now I am stuck on the main "Samsung Galaxy S6 Edge Powered by Android" screen. I can boot into TWPR and into download. I have tried flashing zip from external SD card with USB-OTG with no luck, I have tried flashing from Odin, multiple Odin versions tried, multiple usb cords tried, multiple computers tried.. all result with <ID:x/xxx> Can't open serial(COM) port."
No matter what I do, I can't seem to get anything to take, not stock firmware or otherwise. Any suggestions.. donations for anyone who can help me solve. lol $$
dwall87 said:
I did the same this as the OP, now I am stuck on the main "Samsung Galaxy S6 Edge Powered by Android" screen. I can boot into TWPR and into download. I have tried flashing zip from external SD card with USB-OTG with no luck, I have tried flashing from Odin, multiple Odin versions tried, multiple usb cords tried, multiple computers tried.. all result with <ID:x/xxx> Can't open serial(COM) port."
No matter what I do, I can't seem to get anything to take, not stock firmware or otherwise. Any suggestions.. donations for anyone who can help me solve. lol $$
Click to expand...
Click to collapse
i'm in the same situation , stuck in bootloop for the last 3 days ive tried everything on youtube and forums , with odin with smart swich with kies with twrp , nothing , same bootloop everytime. don'tknow what to do .....
get the model number of your phone and flash the latest firmware through Odin
Milian90 said:
i'm in the same situation , stuck in bootloop for the last 3 days ive tried everything on youtube and forums , with odin with smart swich with kies with twrp , nothing , same bootloop everytime. don'tknow what to do .....
Click to expand...
Click to collapse
In odin under options untick Auto Reboot.
Flash Rom
Phone wont reboot once rom has flashed successfully so you will need to do manual reboot.
Go into recovery mode and wipe data.
Reboot phone
that should help let us know if it works
wifi wont turn on
hi, i managed to install the firmware but now the wifi and bluetooth wont turn on, wifi toggle and bluetooth wont go on, it looks like is trying toget on but after 20 seconds justgo back to off. idont know what to do .........
I can't even get any firmware to load as odin continually stops within seconds of starting to flash phone, no matter what firmware I choose it's the same result failed flash?
First my phone was rooted before this but I tried to install XPOSED but it didint work it had me doing a bootloop so i thought about wiping my phone and didint think my OS would get erased now my phone just stays at the SAMSUNG GALAXY S6 screen I installed TWRP but no luck there people told me to install that but no luck I hope I can get some help ive tried to install stock firmware with odin but it keeps saying FAIL please help!
bump
Here are official firmwares for your device. Boot your device into download mode and connect your phone, it should show up in Odin, then select the file you downloaded from sammobile and flash it from there. If you get any errors, please post the log here and I'll take a look at it.
Hello,
i hope you can help me.. i rooted my galaxy s7 with magnisk, what worked great. Theni want to unroot it and tried with ''Samsungs Smart Switch'' to get back to the Stock ROM, then there was an error ''An Error has occurred while updating the Device Software. Use the Emergency recovery function in the smart switch pc software'', but this also doesnt work.
So i tried tu flash it manually with Odin, and the stockrom from sammobile.com but this stocks every time there at ca 5-10% and there is no error in odin, it just stuck, it looks like this since 7 hours, the download mode an the galaxy was active..
i hope you can help me.. Thanks!!!
Masterdio said:
Hello,
i hope you can help me.. i rooted my galaxy s7 with magnisk, what worked great. Theni want to unroot it and tried with ''Samsungs Smart Switch'' to get back to the Stock ROM, then there was an error ''An Error has occurred while updating the Device Software. Use the Emergency recovery function in the smart switch pc software'', but this also doesnt work.
So i tried tu flash it manually with Odin, and the stockrom from sammobile.com but this stocks every time there at ca 5-10% and there is no error in odin, it just stuck, it looks like this since 7 hours, the download mode an the galaxy was active..
i hope you can help me.. Thanks!!!
Click to expand...
Click to collapse
Corrupted image when downloading try downloading a more reliable firmware to restore also may want to update Odin , Samsung is like iPhone it's hard to mess up restoring
Redownload the stock rom using SamFirm tool or updato.com. If ODIN keeps getting stuck change the USB cable. Do not use generic cables to flash roms or this will happen. Happened me twice, I changed the cable to a brand new stock one (purchased at the official service) and the problem was fixed
Sent from my SM-G930F using Tapatalk
Hello there, I am already more than 3 days trying to download stock firmware for my phone, every day another problem, on the beginning it was always fail while trying with Odin, then I was try another firmware it was downloaded but stucked on update 32%.i understand it can be wrong firmware, I tried other methods, I was add pit for Samsung galaxy s6 edge G925F. Downloaded but didn't help, I tried another firmware for other region it was downloaded, even no fail, but stucked on erasing. I tried recovery mode (volume up-home-power) cant access it. Today I try again, all the time stuck on Initialization.
Note I tried different Odin version.
USB on laptop there's two, 2.0 and 3.0(blue)
The time it was succeed without fail it was on the black USB 2.0
So now even completely can't start to download firmware.
Also I was try to download Twrp after it was nearly succeeded and stucked on erasing, hoping that I can access recovery mode to wipe everything, but Twrp stucked on logo.
After all that I can't do nothing.
I still can access downloading mode and phone stuck on logo if I put it on the charge.
I hope I was give right and enough informations to help me solve the issue.
I appreciate any help
Willy1993 said:
Hello there, I am already more than 3 days trying to download stock firmware for my phone, every day another problem, on the beginning it was always fail while trying with Odin, then I was try another firmware it was downloaded but stucked on update 32%.i understand it can be wrong firmware, I tried other methods, I was add pit for Samsung galaxy s6 edge G925F. Downloaded but didn't help, I tried another firmware for other region it was downloaded, even no fail, but stucked on erasing. I tried recovery mode (volume up-home-power) cant access it. Today I try again, all the time stuck on Initialization.
Note I tried different Odin version.
USB on laptop there's two, 2.0 and 3.0(blue)
The time it was succeed without fail it was on the black USB 2.0
So now even completely can't start to download firmware.
Also I was try to download Twrp after it was nearly succeeded and stucked on erasing, hoping that I can access recovery mode to wipe everything, but Twrp stucked on logo.
After all that I can't do nothing.
I still can access downloading mode and phone stuck on logo if I put it on the charge.
I hope I was give right and enough informations to help me solve the issue.
I appreciate any help
Click to expand...
Click to collapse
You should identify the exact device model.
Then check to download the stock Samsung firmware for this model.
You can read about it here:
[Stock Firmware] Official Stock Firmware for ALL Galaxy S6 Edge Variants [Latest]
Reserved
forum.xda-developers.com