Dear friends...
I bought a brand new j710mn phone yesterday
Well I took it home and attempted to root it. I believe it was successfully rooted but I can't day for sure.
Now I am stuck on a boot screen that has red letters to the top saying custom binary blocked by FRP lock.
Ive been searching all over for a solution but no luck.
I have already tried the following.
1. Flashing stock firmware using Odin via the downloadING screen. But this is blocked by FRP
2. I have tried using Samsung switch.. but it appears as though it does not support the j710
3. I have searched for an sboot file but to no avail. As I've seen that it has worked for those who had a similar problem on their s6edge.
4. I have tried sideloading and installing files using adb and sdcard. But these options have been blocked by frp
5. Of importance I know my username and password for my Google account but I can't get passed the boot screen.
My firmware version is J710MNUBU1APL4
Thanks for anyone knowledgeable enough to assist.
Kind regards
i have the same problem
when i restart my J7 i find this hell error, well , after five hours searching,bricking, a solution dropped, follow this steps written by me.
First of all , install 7zip ,after , download the stock rom from your region, in sam mobile.
ok, now the tutorial starts...
1 - extracts the stock rom in a folder....
2 - rename the "hidden.img" file to "hidden.img.tar"
3 - select all other files(except hidden.im.tar) , right click , 7zip , compress in compacted file , in compress type select tar.
4 - open odin , selec the generated tar in AP/PA, connect the device in download mode already.
5 - flash the file , and when display get black , enter in download mode again and flash the "hidden.img.tar" file.
6 - after that , the device will restart and update system , and the better thing is.... NO FACTORY RESET! nothing will be deleted , all files will stay.
sorry for the bad english :^P
Related
Hi all
need some help
I have tried to update my samsung s6 sm-g925k model ,
It had a Vietnamese 5.01 firmware ,tried to flash it to 5.1.1G925KKKU2COH9_G925KRTC2COH9_G925KKKU2COH5_HOME.tar .md5 using odin 3.10.7
all looked ok , after odin rebooted my phone , it said "erasing"... and rebooted again and since then it is stuck on samsung logo
i can access to download mode , if i soft reset the phone (volume down+power)
tried to re-flesh again with no luck
seen a similar post regarding Samsung 6 edge on xda , with a link to sum .tar file that needs to be flashed to solve the issue
has anyone faced this kind of strange behavior and managed to overcome it?
So I tried to root my Samsung Galaxy S6 today using TWRP and it got stuck in a boot loop. I went to wipe to cache and accidentally wiped to system. So now there is no OS installed. I know I need to somehow put an OS on the device but I'm in Canada and when I go to samsung's site to download the firmware, there is no Canada option. I bought the phone off of amazon and it came with a European wall charger because it was imported, but how do I know what firmware to download?
Also, when I have found the right firmware, how do I flash it onto the device? I can no longer access TWRP, all I can get is the downloading screen thing. Can I use Odin/how do I use Odin?
Somebody help me I'm panicking because I broke my brand new phone!
You should check the Amazon listing to see which model number you have. It's probably SM-920F.
Once you have the correct firmware downloaded, Google a guide to flashing Galaxy S6 firmware with Odin. There are a lot of them out there.
krisztiana said:
So I tried to root my Samsung Galaxy S6 today using TWRP and it got stuck in a boot loop. I went to wipe to cache and accidentally wiped to system. So now there is no OS installed. I know I need to somehow put an OS on the device but I'm in Canada and when I go to samsung's site to download the firmware, there is no Canada option. I bought the phone off of amazon and it came with a European wall charger because it was imported, but how do I know what firmware to download?
Also, when I have found the right firmware, how do I flash it onto the device? I can no longer access TWRP, all I can get is the downloading screen thing. Can I use Odin/how do I use Odin?
Somebody help me I'm panicking because I broke my brand new phone!
Click to expand...
Click to collapse
On the back of the phone it should say which model you have, for example G920F, G920W8, G920P etc.
Download the proper firmware from Sammobile, then follow the tutorial that the following thread has a link to.
http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
If the variant you have is the European model, G920F, I recomend you install the unbranded firmware.
IMPORTANT! MAKE SURE YOU HAVE THE PROPER FIRMWARE! INSTALLING THE WRONG FIRMWARE CAN HARD BRICK YOUR DEVICE!
I really hope this advice helped!
Really important is only that you pick the right model to download. The region isn't that important. Go to sammobile and download your stock rom, but be sure to not pick a branded one, because they are full of junk.
Also, you must use ODIN in that Download-Mode. Open ODIN, plug your device into your pc and see, if ODIN shows up your device. If yes, select "PDA" or "AP" (depending on ODIN Version) and select your ROM that you have downloaded. Then click on start. Don't touch your phone, your cable or your computer for best results. Wait ODIN say "PASS" with a green background. If this occurs, your phone should restart and after 10 mins or so, it should boot Android.
I did the same this as the OP, now I am stuck on the main "Samsung Galaxy S6 Edge Powered by Android" screen. I can boot into TWPR and into download. I have tried flashing zip from external SD card with USB-OTG with no luck, I have tried flashing from Odin, multiple Odin versions tried, multiple usb cords tried, multiple computers tried.. all result with <ID:x/xxx> Can't open serial(COM) port."
No matter what I do, I can't seem to get anything to take, not stock firmware or otherwise. Any suggestions.. donations for anyone who can help me solve. lol $$
dwall87 said:
I did the same this as the OP, now I am stuck on the main "Samsung Galaxy S6 Edge Powered by Android" screen. I can boot into TWPR and into download. I have tried flashing zip from external SD card with USB-OTG with no luck, I have tried flashing from Odin, multiple Odin versions tried, multiple usb cords tried, multiple computers tried.. all result with <ID:x/xxx> Can't open serial(COM) port."
No matter what I do, I can't seem to get anything to take, not stock firmware or otherwise. Any suggestions.. donations for anyone who can help me solve. lol $$
Click to expand...
Click to collapse
i'm in the same situation , stuck in bootloop for the last 3 days ive tried everything on youtube and forums , with odin with smart swich with kies with twrp , nothing , same bootloop everytime. don'tknow what to do .....
get the model number of your phone and flash the latest firmware through Odin
Milian90 said:
i'm in the same situation , stuck in bootloop for the last 3 days ive tried everything on youtube and forums , with odin with smart swich with kies with twrp , nothing , same bootloop everytime. don'tknow what to do .....
Click to expand...
Click to collapse
In odin under options untick Auto Reboot.
Flash Rom
Phone wont reboot once rom has flashed successfully so you will need to do manual reboot.
Go into recovery mode and wipe data.
Reboot phone
that should help let us know if it works
wifi wont turn on
hi, i managed to install the firmware but now the wifi and bluetooth wont turn on, wifi toggle and bluetooth wont go on, it looks like is trying toget on but after 20 seconds justgo back to off. idont know what to do .........
I can't even get any firmware to load as odin continually stops within seconds of starting to flash phone, no matter what firmware I choose it's the same result failed flash?
After back to Stock firmware
i can access to recovery mode / download mode and thats all.
im only see the logo of samasung galaxy note 5.
i tried a diffrenet stock firmwares (different release dates ) - different odin programs (3.10.6 3.10.7)
and also with kies.
nothing shows up after the logo. only when the phone do a reboot ufter updating the firmware its show android icon - installing updates , and thats all its comes back to logo.
The only things i see differnet : in the recovery mode it says at the bottom ( in yellow ) : "dm-verify verfication failed ... need to check DRK first..
and in download mode : ,
ODIN MODE
DOWNLOAD SPEED : FAST
Product NAME : SM-N920T
CURRENT BINARY : Samsung official
System STATUS : Custom
FRP LOCK : "on" .
Secure Download "Enabled"
KNOX WARANTY VOID : 1(0X0301)
AP SWREV:B:2 K:0 S:0.
when i try to flash custom kernel / custom recovery . its blocked by frp which i dont know why..
how to fix this trouble . i spent 2 days for that and im stuck with that and no phone.
( before i used with DARKSHALTER ROM ).
any help / suggestions?
Thanks,
Roee
Try enable oem on developer settings????
Sent from my SM-N920T using Tapatalk
My phone stuck on logo , i cant access to developer options or something , there is another option that i missing to unlock oem from odin or something outside from adb?
Roekaz said:
After back to Stock firmware
i can access to recovery mode / download mode and thats all.
im only see the logo of samasung galaxy note 5.
i tried a diffrenet stock firmwares (different release dates ) - different odin programs (3.10.6 3.10.7)
and also with kies.
nothing shows up after the logo. only when the phone do a reboot ufter updating the firmware its show android icon - installing updates , and thats all its comes back to logo.
The only things i see differnet : in the recovery mode it says at the bottom ( in yellow ) : "dm-verify verfication failed ... need to check DRK first..
and in download mode : ,
ODIN MODE
DOWNLOAD SPEED : FAST
Product NAME : SM-N920T
CURRENT BINARY : Samsung official
System STATUS : Custom
FRP LOCK : "on" .
Secure Download "Enabled"
KNOX WARANTY VOID : 1(0X0301)
AP SWREV:B:2 K:0 S:0.
when i try to flash custom kernel / custom recovery . its blocked by frp which i dont know why..
how to fix this trouble . i spent 2 days for that and im stuck with that and no phone.
( before i used with DARKSHALTER ROM ).
any help / suggestions?
Thanks,
Roee
Click to expand...
Click to collapse
Try refreshing the stock rom. Restart in recovery mode and do a factory reset then clear the cache. But I have to warn you. You will loose all your personal files like music and picture etc.
Did it, wiped cache and tried factory reset , not help yet :/
I see you have FRP lock on, need to get it off. If performing a full wipe and than full odin flash cannot get the phone to boot, you could try Odin flashing twrp than sideloading a ROM and try and that way.
---------- Post added at 03:51 PM ---------- Previous post was at 03:50 PM ----------
FRP LOCK WALKAROUND. http://www.androidpolice.com/2015/1...msung-phones-due-to-a-flaw-in-their-software/
jaxenroth said:
I see you have FRP lock on, need to get it off. If performing a full wipe and than full odin flash cannot get the phone to boot, you could try Odin flashing twrp than sideloading a ROM and try and that way.
---------- Post added at 03:51 PM ---------- Previous post was at 03:50 PM ----------
FRP LOCK WALKAROUND. http://www.androidpolice.com/2015/1...msung-phones-due-to-a-flaw-in-their-software/
Click to expand...
Click to collapse
Ok , so i need to get off the frp lock, its will solve everything , how its possible to get it off without access to the phone and installing the apk , because of that i cant move from the starting logo.
I only have recovery mode and downloading mode , i dont know why there is a problem with that phone so only with a custom kernel tge system goes up and work ( now i cant install custom kernel because its lock )
What i need for sure is the otg cable , how can it be done with my situation?
If i flashstock firmwares from odin its ok from frp protection , how can i flash twrp recovery without get the blocked by frp , must be a way
Roekaz said:
Ok , so i need to get off the frp lock, its will solve everything , how its possible to get it off without access to the phone and installing the apk , because of that i cant move from the starting logo.
I only have recovery mode and downloading mode , i dont know why there is a problem with that phone so only with a custom kernel tge system goes up and work ( now i cant install custom kernel because its lock )
What i need for sure is the otg cable , how can it be done with my situation?
If i flashstock firmwares from odin its ok from frp protection , how can i flash twrp recovery without get the blocked by frp , must be a way
Click to expand...
Click to collapse
Download Team Viewer PM me your ID and Password and i will help you remove FRP lock from your device ...
JUSMEJOSE said:
Download Team Viewer PM me your ID and Password and i will help you remove FRP lock from your device ...
Click to expand...
Click to collapse
Paid yesterday in ebay 35$ for unlock it , i dont know how he did it , just ran a few scripts abd phone connected to pc in downloading mode and unlocked : FRP off.
Im curius about the question "how its made" , by my self if i get the same bug again how to solve it ?
I read a lot about same story with s6 and alao with note 5 .
Thanks a lot for your offer Jusmejose
Is your phone still stuck on logo? If so when you boot into recovery does it say check DRK?
Sent from my iPhone using Tapatalk
thatotherguy.. said:
Is your phone still stuck on logo? If so when you boot into recovery does it say check DRK?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yes , and when i try to exit from rcovery mode ( reboot) its say unable to mount in red and then rebooted
Says to check Drk right?
Sent from my iPhone using Tapatalk
thatotherguy.. said:
Says to check Drk right?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yes, at the bottom of recovery screen in yellow
How fix this?
The same thing is and for me with my sm-n920w8 Canadian version ....i flashed twrp and custom kernel and many other custom rom and when flashed official firmwares stuck on bootlogo and on stock recovery say need to check drk and when flash again custom kernel booted up...
I had the same problem, Samsung has a tool that will fix it. You will need to put your note 5 serial number, It will then download the firmware and fix your problem.
need drk
Darkzilla05 said:
I had the same problem, Samsung has a tool that will fix it. You will need to put your note 5 serial number, It will then download the firmware and fix your problem.
Click to expand...
Click to collapse
How to fix this problem any link or way for it and serial number is imei or not ?
Roekaz said:
Yes, at the bottom of recovery screen in yellow
How fix this?
Click to expand...
Click to collapse
To fix this you need Samsung programing tools witch cost money, then you need DRK fix AT Commands, if you still have the problem I can fix it for you but the cable I use I'd need to have the phone, maybe if we got a mod to help us with you shipping phone to me and I'll ship back same day but that's up to you only way I know how to fix the DRK aka Dev Root Key
I can make a video, showing a phone with DRK error in recovery and I can fix it so you can see
There is a temp fix for it, you'll need latest firmware and need to open the .tar with winrar, extract system.img and sboot.img then make a new .tar with them both in it, then flash with odin and your phone will boot, but if you do a factory reset, it will do the same thing get stuck at the note 5 logo
Sent from my SAMSUNG-SM-G890A using Tapatalk
Sorry for the long and overdue response.
The program is called Smart Switch by Samsung and you can get the tool for free, just google it and you will find it. If not let me know so I can make a Google Drive link for anyone to download.
---------- Post added at 11:36 PM ---------- Previous post was at 11:31 PM ----------
Smart Switch from Samsung, and it can be downloaded for either Mac or Windows for free. It will require to input your device serial number, and has been updated for mm support. Hope it helps
---------- Post added at 11:44 PM ---------- Previous post was at 11:36 PM ----------
JUSMEJOSE said:
Download Team Viewer PM me your ID and Password and i will help you remove FRP lock from your device ...
Click to expand...
Click to collapse
need help with my Note-5 SM-N920T (T-mobile). I am stuck on the FRP lock and phone won't go past boot screen. I tried to flash a stock Rom through ODIN but it failed. I unknowingly tripped the Frp on when I wasn't receiving any OTA updates and tried to wipe the cache but now even when I try to data reset the phone it fails.
Luckily I remember the google ID and password that I used to setup the phone but I can't go past the boot screen need help please!!!!!!
zayn1602 said:
need help with my Note-5 SM-N920T (T-mobile). I am stuck on the FRP lock and phone won't go past boot screen. I tried to flash a stock Rom through ODIN but it failed. I unknowingly tripped the Frp on when I wasn't receiving any OTA updates and tried to wipe the cache but now even when I try to data reset the phone it fails.
Luckily I remember the google ID and password that I used to setup the phone but I can't go past the boot screen need help please!!!!!!
Click to expand...
Click to collapse
im having the same issue, how do u get frp lock off without getting into the phone?
I have an s7 edge (Sm-g9350) with no odin mode (it has china menu instead) , so last week i did something , i erased the whole phone with fastboot cuz i wanted to flash a custom rom (Aurora) so when i erased , everything got deleted (recovery , boot , system...etc) only bootloader is left for now and thats my only hope , so i wanted to flash the rom with fastboot but it said file is too large so i tried one by one and still files were too large while the files (boot & recovery.img) are 22mb not more and fastboot says max download size is 134217728 bytes. some say i should update binary so i downloaded android sdk and it didnt do anything no changes all are same , i tried to go to recovery mode but it kept restarting cuz recovery mode is deleted , and i tried going to odin mode but it kept restarting cuz there isnt any odin mode and that china menu got erased too , so ya i tried looking for anything i could flash but no use im so stuck in here , and unlocking bootloader didnt help , so ya any ideas you got i would love to hear it and thank you.
PS: i dont wanna give up on this phone.
Hi there and welcome to Assist,
I'm afraid you are hard bricked that device, so too much isn't to do.
Here is some discussion about : Galaxy S7 Edge Hard Bricked
For more questions please use this dedicate dforum for S7 Edge: Samsung Galaxy S7 Edge Questions & Answers
Good luck
Hi guys,
I have managed to soft brick my S7 flat after trying to root it. using odin. I have also done a factory reset - so no more debugging over the PC, I have to now try recovery on SD card.
The stock rom I have is G930FXXU1DQB7
I can't seem to find a stock rom to put onto the SD card and reinstall the rom ... I think samobile and another site seem to be the only ones that has the stock ROM and there d/l are terrible and often get a corrupted file ( I have tried x4 times now )
If some one could tell me how to either - Put a custom ROM on a stock S7 ( No TWERP on the phone yet ) .. or how to recover my S7 back to manufacturers ... Id buy you a virtual beer ! Had my phone for about 2 weeks and already I cant use it !!
The following thread has the stock firmware uploaded to Mega, so should be easier and more reliable to download:
https://forum.xda-developers.com/galaxy-s7/how-to/official-stock-firmware-update-odin-t3369431
Don't forget to thank the author of the thread if you find it helpful.
thx, ill give it a go
thx, ill give it a go
I got 9 MB a sec. d/l ... thats a lot better !! Ill try this out and see if I can get it back. - and I will thx the user for all the hard work etc. they have put in to their project
no, didn't work .. it sayes the footer is wrong ../??
I don't know what that means ... anyone ..?
Formatt said:
no, didn't work .. it sayes the footer is wrong ../??
I don't know what that means ... anyone ..?
Click to expand...
Click to collapse
You need ODIN 3.12.3 from here
https://mega.nz/#!uBwC3KqR!17OPP5A1g9d7-GxAqCbjXFpmYfO7CgAHNcaZxqEkOao
You need the latest G930F ROM from either here
http://updato.com/firmware-archive-select-model?q=G930F
Or from samfirm tool here
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Extract the ROM, add AP, CP, CSC and BL to the 4 sections in ODIN
Put the phone into download mode (Volume Down & Home & Power)
Connect phone to PC USB, make sure the port is connected on ODIN
Press Start on ODIN
Wait for it to reboot back into working Android
thx for your comments, but I cant use odin as I have hard reset the phone ! - so no ADB via usb
I will try the links though ..
The phone does go into d/l mode ... but as I have hard reset to factory I need to go back into the phone and go into dev. options and enable debugging. .. trouble is The phone just boots to the logo and then loops.
Formatt said:
thx for your comments, but I cant use odin as I have hard reset the phone ! - so no ADB via usb
I will try the links though ..
Click to expand...
Click to collapse
What has ADB got to do with ODIN?
You just need download mode, nothing more
Every step I wrote is all you need to follow
hi guys,
Ive managed to fix it ! - I downloaded a good stock rom and uploaded like you guys said ... with Odin ... I had to mess abouit with Odin versions before I got one that worked.
Many thanks guys for all your help. I really had a panic on then for a bit !