Database Info

gsmarti hard reset... power cut off

I was flashing my gsmarti's ROM this morning... I follow all the steps and it is successfully go into the "flashing environment"... Unfortunately, the process stuck at the beginning... and suddenly, it turn off itself... then, I cant switch on my phone anymore... and I dont even get the static Gigabyte screen as well...
Is there any solution to this?
Thank you!

Do you know where to find the Rom Upgrade Utility for your phone?
If you go to your carrier's website and log into it, do you by any chance have a downloadable file that will restore your phone to its factory settings?
There's also many different GSmart models .. which one do you have?
I looked up Gsmart phones, and their support site has firmware upgrades listed for some of their phones .... see if you're is listed.
http://www.gigabytecm.com/eng/gbc_supportcategory.aspx?sid=7&tabIndex=3

Thank for you reply =)
Actually i am using gsmart i (64)... and i have the latest firmware with me...
Because this device is using POCKET GHOST to restore and backup the system...
as i mentioned earlier... my "flashing" process is stuck at the beginnig... so, in my opinion, i think the pocket ghost has been deleted and i cant do the flashing anymore... is it true?

If it run's Windows Mobile ... you should be able to run the RUU at the bootloader screen....
As far as how do you get into the bootloader on your phone ... I have no idea.... on mine, I soft reset while holding the camera button in and keeping the camera button held in until the bootloader screen comes up which looks something like this (note i just randomly found this pic on google images)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hi... thank you ya...
but i am still stuck in the black screen...
and i cant find any way to access into the bootloader...
i am searching the other sites... and i came across this:
they said if anything goes wrong during "flashing", the ROM will be locked...
is that true?
and one more thing, the bootloader, is it almost same as the bios (cmos) of
our pc?
and for your information... a lot of people are having the same problem...
thx thx... appreciate!! =)

Is this the bootloader?

Yep, that is our bootloader for the Gsmart series. On the i300 its accessed by pressing the red phone, green phone and power buttons at the same time.
If you want to change your ROM then you need to load the new version to your SD card (and I think it needs to be the only contents on the card).

Tab 2 Brick And Problem.URGENT!!

So I don't have a Tab 2 but I'm posting this in behalf of my cousin which have a P3110 WiFi only Tab 2 7.0
So I tought my cousin how to do root and stuff.But yesterday,when he flashed CM11,something went wrong and it bricked his Tab.
My cuz contacted me via Facebook for help.At first,the Tab was stuck at the boot screen.But after a few hours,the problem went worse.
The Tab will not turn on by pressing the power button.But when a charger is connected,the Tab turns on but it just shows a battery and a loading circle.Thats it.Ill put a picture on how it looked like somewhere.......down here!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well.I need help to fix this.URGENTLY.Thanks

c903jerk said:
So I don't have a Tab 2 but I'm posting this in behalf of my cousin which have a P3110 WiFi only Tab 2 7.0
So I tought my cousin how to do root and stuff.But yesterday,when he flashed CM11,something went wrong and it bricked his Tab.
My cuz contacted me via Facebook for help.At first,the Tab was stuck at the boot screen.But after a few hours,the problem went worse.
The Tab will not turn on by pressing the power button.But when a charger is connected,the Tab turns on but it just shows a battery and a loading circle.Thats it.Ill put a picture on how it looked like somewhere.......down here!
Well.I need help to fix this.URGENTLY.Thanks
Click to expand...
Click to collapse
Prerequisites :
Make sure you have samsung usb drivers installed,otherwise odin will not detect it,
then, try these steps :
1)Disconnect the wall charger first. reboot into download mode by long pressing Power button and Volume down buttons simultaneously for 8 to 10 seconds, then when you see "download" mode written,immediately press volume up button.
2) Download odin and download stock firmware from www.samsungupdates.com based on your region.
3) if you phone gets detected,odin textbox will turn green.
4) open odin, now check option " restart" make sure only this option is checked like the following screenshot attached.
5) now click on pda and naviagate to the stock firmware you have downloaded....
6) it will gonno take sometime,,,,,until you see a successful message in the bottom-left corner....
thats it. if you still run into any further issues,please let me know.

Well thanks for your help.The Tab is working again.Admins please lock.

c903jerk said:
Well thanks for your help.The Tab is working again.Admins please lock.
Click to expand...
Click to collapse
You are welcome buddy..

[Q] PLEASE HELP ME, Urgent :(

Hello,
I have Samsung Galaxy Note 10.1 ( Old version ) .
I got a problem with my device
I can`t turn it on anymore, when I hook it up with USB plug into ( PC ) or ( Power Adapter ) I got the following screen :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so I thought its not charged.
But then I left it to charge full ( 3 - 4 hours or maybe more ) but when I turn it on the welcome screen shows and stucked forever like following :
I tried to reset the factory and data and cache and everything inside BOOT list ( into "Power + Voulme up " menu ) but nothing happen too and the welcome screen still keep stucking .
What can I do ?
Some people told me I should put a new ROM/Software into it
But what is true ? and where is the problem ?
Please HELP !

I can't see any of the pictures you have put in your post. Have you tried reflashing your current rom onto your Note 10.1 with Odin? That usually fixes problems like this and it lets you keep your data.

link6155 said:
I can't see any of the pictures you have put in your post. Have you tried reflashing your current rom onto your Note 10.1 with Odin? That usually fixes problems like this and it lets you keep your data.
Click to expand...
Click to collapse
I am not familiar with Odin nor reflashing and stuff .

m4xst4r said:
I am not familiar with Odin nor reflashing and stuff .
Click to expand...
Click to collapse
1. Find the firmware for your device base on it's model number: http://www.sammobile.com/firmwares/
2. Download Odin onto your computer and run it.
3. Get your tablet and when it's turning on, hold the power button and volume down button until you get to the warning screen.
4. Press volume up to continue to download mode and plug your tablet into your computer via USB
5. On your computer, make sure Odin says "Added!". Load the firmware as a PDA into odin and press "Start". Do not unplug your tablet until the process has finish.
6. Android should begin to update and once that's done you should be good to go.

Samsung galaxy s6 cant boot and cannot go in to download or recover mode.

Samsung galaxy s6 cant boot and cannot go in to download or recover mode.
I was trying to unroot the device and delete a file and restartet the phone and i couldn't start.
It cannot get into download mode or recover mode
When i try to start it is just going in to boot loop
model numer is SM-G920F
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Any 1 help ?

Okay i will try then when i come home

rifek4 said:
Press Volume - & Home & Power for ~30sec then phone must automaticlly reboot, then when you will see Samsung logo directly really fastly move finger from Volume - to Volume + but still holding that other two buttons. You must get in to recovery menu if you had flashed it before. Then flash again ROOT or full-wipe and just clean install another ROM+ROOT ofcourse. If you did fully unroot via SuperSU then that's can be why now system don't started
Click to expand...
Click to collapse
nop did not work

rifek4 said:
Hold anyway Vol - + Power + Home for longer time (~45sec), doesn't matter do phone is turned on or off... Phone must show you Download Mode. If not, what happenes in your case? Only Samsung logo as is on the photo in first post?
Click to expand...
Click to collapse
Nop it is just trying to start and then restart look at the video.
https://www.youtube.com/watch?v=TAZ3E07khqA
Sorry for the music in the baground

https://www.youtube.com/watch?v=TAZ3E07khqA&ab_channel=AmperXD

rifek4 said:
What happened with phone? What cause that? Did you tried to flash some firmware via Odin before?
Click to expand...
Click to collapse
I removed a file on the phone when i was trying to unroot it, i thinks it was a pretty importen file ?
I have a rootet oneplus 5 and another samsung galaxy s6.

rifek4 said:
So that was really important file You remember what name or from where that file was deleted?
EDIT:
You can try some guides from HERE, there is few if you will looking good... Maybe something will help but I don't think so... More possible in some GSM-service, they got some special stuff
Click to expand...
Click to collapse
so what's you are saying that the mobile is ****t ? and will not work hehe

BV4900 Pro systemupdate and brick

Hello everybody!
Yesterday, on 28 of December, I had a massage on my BV4900 pro that a systemupdate is now ready to be installed.
After download of 2,48 GB file the installation went on, the phone started in the next step. On the screen was this white circle and the installation-progress was shown under. After the update was completted, the phone didnt start. The screen ist black. I cannot do anything with it. I tried to flash the firmware or at least the preloader with sp-flash-tool, but cannot. The connection to sp-flash-tool is with 100% but then I see under device-manager is "Media Tek PreLoader USB VCOM (Android)". So the flash-tool does not flash. I tried with volume buttons to stop the battery-loading, but withou sussess. What can I try more to save the phone?
Some more informations: The red LED ist on, when the phone ist connected to pc or power-supply. The phone was rooted. The last android version: 12
And maybe this picture will help:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Just a Hint:
Do not flash preloader! preloader is responsible for preloader mode (which used by SP Flash Tool)
Do not use "Format all + Download" option. Formatting whole emmc will brick device.
regarding your issue. follow the recommendations of your screenshot.

aIecxs said:
regarding your issue. follow the recommendations of your screenshot.
Click to expand...
Click to collapse
Yes, I did it already. Nothing helps.
I spend the second day with this problem and do not come forward.

you already tried another cable and another PC? then probably usb jack is faulty. you shouldn't flash anything via usb then!
I am not the one who told you - you could try other flash tools. do not flash, just try to read back for now...
https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirement
https://github.com/bkerler/mtkclient

Somebody else, who maybe has an idea?

I found this discription of the error:
The phone seems always be on. With power button I can only "restart" it. How can I shut it down?
Is there a tool I can use for switch the phone off?
Or maybe cmd-command for shutting down the device on com-port? I cannot find anything in internet. Only with adb. But I have no connection to adb, the phone is over adb not rearchable.

Maybe someone can show me the test point for this smartphone?