I was flashing my gsmarti's ROM this morning... I follow all the steps and it is successfully go into the "flashing environment"... Unfortunately, the process stuck at the beginning... and suddenly, it turn off itself... then, I cant switch on my phone anymore... and I dont even get the static Gigabyte screen as well...
Is there any solution to this?
Thank you!
Do you know where to find the Rom Upgrade Utility for your phone?
If you go to your carrier's website and log into it, do you by any chance have a downloadable file that will restore your phone to its factory settings?
There's also many different GSmart models .. which one do you have?
I looked up Gsmart phones, and their support site has firmware upgrades listed for some of their phones .... see if you're is listed.
http://www.gigabytecm.com/eng/gbc_supportcategory.aspx?sid=7&tabIndex=3
Thank for you reply =)
Actually i am using gsmart i (64)... and i have the latest firmware with me...
Because this device is using POCKET GHOST to restore and backup the system...
as i mentioned earlier... my "flashing" process is stuck at the beginnig... so, in my opinion, i think the pocket ghost has been deleted and i cant do the flashing anymore... is it true?
If it run's Windows Mobile ... you should be able to run the RUU at the bootloader screen....
As far as how do you get into the bootloader on your phone ... I have no idea.... on mine, I soft reset while holding the camera button in and keeping the camera button held in until the bootloader screen comes up which looks something like this (note i just randomly found this pic on google images)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi... thank you ya...
but i am still stuck in the black screen...
and i cant find any way to access into the bootloader...
i am searching the other sites... and i came across this:
they said if anything goes wrong during "flashing", the ROM will be locked...
is that true?
and one more thing, the bootloader, is it almost same as the bios (cmos) of
our pc?
and for your information... a lot of people are having the same problem...
thx thx... appreciate!! =)
Is this the bootloader?
Yep, that is our bootloader for the Gsmart series. On the i300 its accessed by pressing the red phone, green phone and power buttons at the same time.
If you want to change your ROM then you need to load the new version to your SD card (and I think it needs to be the only contents on the card).
Related
hi,im a noob to android and my first step into the pool is the garmin asus a50..
yesterday i decided to root the phone
i installed a file manager
i installed titanium back up and ran it
i installed z4root and rooted
i installed super user
i installed root explorer.
all went well until i started deleting all the optus bloatwear,facebook ciao etc
i did a reboot of the fone and a msg came up stating a google file couldnt be opened,apart from that all was well..
so i decided i needed a restore to start again,i couldnt work out how to restore from titanium so i did a master reset and reinstalled the software off the garmin site..
i want to try this again...this time ill just root and root explore.
has anyone got any tips or ideas for me..
where i went wrong before etc
cheers
guys whats happening? lol
everybody is ruining the bastard. ha ha
mine is broken too, a50, i rooted the damn brick with faulty app, then it got slow and unstable, so i did the master reset, wow. now a virus warning stacks on the screen after start up and pin code, saying the battery cover is open and ask for restart, crazy retarded.
so it doesnt let me to do anything.
I need to install the ROM via USB plug, anyone got an idea if it works? Im actually mushroom, so I need to know which Rom is good, like 2.1 update works? and can pour the rom into its chip using USB cable?and if yes, how should I do it.
Plug the phone into the wall or computer.
power it off.
Hold the D-Pad left while powering the phone back on.
"Wipe Userdata" should appear on the screen. Let go, and let it run.
It will restore the phone to factory settings, including all software.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I bought a ebay Garminfone (it's my second) and it came with 1 attempt left to enter the code. I've ordered the code, but I wanted better odds than 1 try.
Hold D-Pad left while powering on. Hold D-Pad LEFT until the next line appears:
"Wipe userdata" appears on the screen. It can take a few minutes to run its course.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It wipes EVERYTHING off the phone. Just be warned.
I did a Master Clear when it restarted, just for good measure. I have no idea if I needed to or not. I had a T-Mo SIM card (unregistered) to be able to access the Master Clear section. It may work without doing the Master Clear.
But it does reset the counter to 10 tries!
This process may even work on a HARD LOCKED phone that shows 0 attempts left, but I have not had cause to try that. This method wipes everything on the phone and restores it with the hidden/secure recovery image. Hard Lock seems to be a software issue, which can probably be changed with this method.
After I did this, I changed the .update file to the Canadian one for Videotron. The 10 tries stuck!
I am just waiting for my unlock code to give it a try.
I think it's pretty safe to buy used phones that claim not to read the SIM card etc now. Updating the old 1.6 version to 2.1 fixes that. D-Pad left + power fixes almost everything else.
This process should be able to recover from anything except if you've screwed up the bootloader or the hidden recovery image.
this method does not work on my hardlock phone, i try to update but no sucess, it hang up after rebooting in the first line until i remove battery pls any one know solution to this
segun4u said:
this method does not work on my hardlock phone, i try to update but no sucess, it hang up after rebooting in the first line until i remove battery pls any one know solution to this
Click to expand...
Click to collapse
pls someone help me here, i have code to unlock but phone is hardlock,
Hi,
I've been having problems with this phone, everytime I turn on the data plan it keeps poping up messages that all the process have stopped working so whenever I rebooted this keeps happening.
I tried going into recovery mode (e3) and wiping (factory reset) everything but this doesn't work, everything remains the same,
So I was trying to follow the guide to root it and load cwm recovery (from this post http://forum.xda-developers.com/showthread.php?t=1899736) but it is not working.
I installed the drivers and I'm able to see my device in the windows explorer but when I start the runme.bat to root the phone it just throws a bunch of error messages.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So i tried to load the cwm recovery using the flastool and the process completed with no problem (the green circle appeared) but when I turn on the phone it loads the stock e3 recovery mode.
Is my phone broken ? what do you guys suggest I do ?
thanks in advance
i have this problem to :S somebody can help us??
Liquid Gallant won't reboot
I've got the same issue as mentioned in the post before; does the owner found a solution for his issue?
I tried to follow the tutorial on this forum and got the same issue when installing the *. bat file. File runs but won't detect the phone and closes.
Untill now the problem persists; frequent crash and shut down while using (wathever what, phone, internet, apps,..). I have not much experience with smartphones but it seems to me the internal boot is corrupt. Are any possible tpols or hints available or should the item be returned to ACer (when you know their helpdesk and utility service is crap!)
Same problem
Hello,
I had the same problem last year. I couldn't hard reset ( tried the 2 ways: via the settings or via the volum button when you start). It doesn't reset anything. The applications closes by themselves and I cannot do anything.
Last year, I sent the phone under the warranty and they repaired it and sent to me back.
Now I have exactly the same problem but my phone is not under warranty anymore.
Does anyone found a solution ?
Thanks.
Hello, me and my friend were looking for any solution for a13 q8 v1.0 no touch after flashing,
here is the story : me and my friend are working in a shop , people are buying chinese tablet for there children, but sometimes kid will put a lock screen on theire tablet and they forget it what was the pattern or PIN , they take it to our shop to remove it, other chinese tablet don't have any problem when flashing. These types of tablet USB Debug is not enabled and can not boot into recovery using power button + vol up , the only way to remove it is flashing it, but when i flashed it touch will not working anymore, i flashed it with many firmwares but no touch even i modified the firmware still no touch.
what is the fix . Is there a way to flash data partition without flashing the whole partition
if some one know or have the fix or costs money i will buy it
here is the picture of the tablets hardware :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://mega.nz/#!sRR3wA6S!fBY3DD008lTZ4hgDt4J7wd7t1w8aDUt4ily23ZKNJeI
up.............pls help me
Hello Bro
KK_Enabler said:
Hello, me and my friend were looking for any solution for a13 q8 v1.0 no touch after flashing,
here is the story : me and my friend are working in a shop , people are buying chinese tablet for there children, but sometimes kid will put a lock screen on theire tablet and they forget it what was the pattern or PIN , they take it to our shop to remove it, other chinese tablet don't have any problem when flashing. These types of tablet USB Debug is not enabled and can not boot into recovery using power button + vol up , the only way to remove it is flashing it, but when i flashed it touch will not working anymore, i flashed it with many firmwares but no touch even i modified the firmware still no touch.
what is the fix . Is there a way to flash data partition without flashing the whole partition
if some one know or have the fix or costs money i will buy it
here is the picture of the tablets hardware :
https://mega.nz/#!sRR3wA6S!fBY3DD008lTZ4hgDt4J7wd7t1w8aDUt4ily23ZKNJeI
Click to expand...
Click to collapse
LINK IS NOT WORKING :crying::crying::crying:
I posted this thread long ago, probably I deleted the photo. But the tablet is (Alwinner A13 Q8_V1.0) and I'm still looking for a solution for the tablet.
Hi Everyone Thans for having me Im stuck
My s7 froze and wouldnt do anything I managed to turn it off ,then it wouldnt boot ,after clearing the cashe and rebooting system it almost started but kept going to the android falling over ,
I read the options to sort this and tried to flash twrp recovery I seemed to go ok but when the phone rebooted it went to the An error has occured while updating the device software screen ,
I have tried smart switch but it does not see /connect the phone ,I can with a bit of messing with the buttons get from the An error /use the emergency recovery function screen to the ODIN Mode screen and the phone connects to odin But when i try to re flash the boot loader it flashes to the end then fails .
Am I right thinking Its the boot loader I need to get on 1st to get any further ?
Can anyone point me in the right direction ?
If ive posted in the wrong place please can you move
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sounds to me, like part of the storage may have suddenly failed or been damaged, causing your device to lock up and after a reboot, triggering this unusual state. Part of the bootloader is likely not getting read or written to properly, so installing fails only after partially writing to the device, and it refuses to boot. You could try a repartition and complete installation - that might also make it worse though. I've seen the blue screen of mild annoyance many times - not sure about the falling android, was there any text? If so, what did it say? The firmware does contain screens for various diffrent panic states, resembling the one you mentioned. I would encourage you to do some more research on those and look for patterns in the way it fails - or doesn't - when flashing other parts of the firmware package. Don't even bother with SmartSwitch - in my experience, it fails at anything the errors tell you to use it for. Also, simple issues like a faulty cable or the wrong firmware can often be overlooked - so make sure those are fine before starting to experiment.