Database Info

gsmarti hard reset... power cut off

I was flashing my gsmarti's ROM this morning... I follow all the steps and it is successfully go into the "flashing environment"... Unfortunately, the process stuck at the beginning... and suddenly, it turn off itself... then, I cant switch on my phone anymore... and I dont even get the static Gigabyte screen as well...
Is there any solution to this?
Thank you!

Do you know where to find the Rom Upgrade Utility for your phone?
If you go to your carrier's website and log into it, do you by any chance have a downloadable file that will restore your phone to its factory settings?
There's also many different GSmart models .. which one do you have?
I looked up Gsmart phones, and their support site has firmware upgrades listed for some of their phones .... see if you're is listed.
http://www.gigabytecm.com/eng/gbc_supportcategory.aspx?sid=7&tabIndex=3

Thank for you reply =)
Actually i am using gsmart i (64)... and i have the latest firmware with me...
Because this device is using POCKET GHOST to restore and backup the system...
as i mentioned earlier... my "flashing" process is stuck at the beginnig... so, in my opinion, i think the pocket ghost has been deleted and i cant do the flashing anymore... is it true?

If it run's Windows Mobile ... you should be able to run the RUU at the bootloader screen....
As far as how do you get into the bootloader on your phone ... I have no idea.... on mine, I soft reset while holding the camera button in and keeping the camera button held in until the bootloader screen comes up which looks something like this (note i just randomly found this pic on google images)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hi... thank you ya...
but i am still stuck in the black screen...
and i cant find any way to access into the bootloader...
i am searching the other sites... and i came across this:
they said if anything goes wrong during "flashing", the ROM will be locked...
is that true?
and one more thing, the bootloader, is it almost same as the bios (cmos) of
our pc?
and for your information... a lot of people are having the same problem...
thx thx... appreciate!! =)

Is this the bootloader?

Yep, that is our bootloader for the Gsmart series. On the i300 its accessed by pressing the red phone, green phone and power buttons at the same time.
If you want to change your ROM then you need to load the new version to your SD card (and I think it needs to be the only contents on the card).

rooting garmin asus a50..noob style

hi,im a noob to android and my first step into the pool is the garmin asus a50..
yesterday i decided to root the phone
i installed a file manager
i installed titanium back up and ran it
i installed z4root and rooted
i installed super user
i installed root explorer.
all went well until i started deleting all the optus bloatwear,facebook ciao etc
i did a reboot of the fone and a msg came up stating a google file couldnt be opened,apart from that all was well..
so i decided i needed a restore to start again,i couldnt work out how to restore from titanium so i did a master reset and reinstalled the software off the garmin site..
i want to try this again...this time ill just root and root explore.
has anyone got any tips or ideas for me..
where i went wrong before etc
cheers

guys whats happening? lol
everybody is ruining the bastard. ha ha
mine is broken too, a50, i rooted the damn brick with faulty app, then it got slow and unstable, so i did the master reset, wow. now a virus warning stacks on the screen after start up and pin code, saying the battery cover is open and ask for restart, crazy retarded.
so it doesnt let me to do anything.
I need to install the ROM via USB plug, anyone got an idea if it works? Im actually mushroom, so I need to know which Rom is good, like 2.1 update works? and can pour the rom into its chip using USB cable?and if yes, how should I do it.

Plug the phone into the wall or computer.
power it off.
Hold the D-Pad left while powering the phone back on.
"Wipe Userdata" should appear on the screen. Let go, and let it run.
It will restore the phone to factory settings, including all software.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Help to solve problems " Mid sharpixels InfoTMIC m009f " ( Solved )

First send a cordial and affectionate greeting to all users of the forum admin and mod :good:
I have left this tablet to try to solve a problem with the wifi, plug it in and cut a few seconds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've been researching this tablet and there is nothing specifically for her.
I have some doubts:
1) The factory brings Rom does not have the ability to factory reset it, you might not have root. In total reset option but does not give anything.
2) Nor has the USB debugging option so I can not connect to the PC, connect and no response
---------------------------------
A real headache, I have EXPERIENCE in other tablet but with this or not and where to start.
- This tablet shaped enter in "Recovery" from the beginning ?.
I've been playing with the keys of power + menu + center key and varying options but does not enter into recovery mode.
- Is there a way with everything explained to charge any firmware ?.
I think it read in this thread the adapter is 24 Pin, s but the manual firmware loading indicates the need to connect the USB tablet.
- What would be to avoid mistakes most appropriate firmware according to the information provided ?.
Thank you very much anticipated by the aid.
Best Regards :laugh:

[m009f clone] Rooted firmware and a couple of tweaks for the PITA
I found this possible solution, but there is no way to connect
USB this tablet.
[m009f clone] Rooted firmware and a couple of tweaks for the PITA
I tried with Windows XP but the application for flash new firmware
not detect the connection, not even Windows detects a new device.
Any ideas or possible next steps according to experiences?
Thank you very much.

SOLVED !!!!!
SOLVED!!. :good: :good: :good:
For information and help other users with the same or similar problems
with these tablet based on Chip: InfoMIC m009f.
http://www.techknow.t0xic.nl/forum/index.php?topic=2971.msg33306#msg33306
Best Regard

Impossible to reinstall a rom after root

Hello guys,
I'm new here, I've read a lot about your different topics and I'm admirative for some level god members with their answers :good: :laugh:
Indeed I'm a dev, but for websites so it's a bit different with phones for me, and I will try to explain as detailed as I can.
I have a samsung SM G965F, bought in Poland (I work here for the moment); And indeed tried to root it for private purposes.
I followed a tutorial; I was on Pie 9 (****tiest ever update for me); from there OEM in DEV tools was activated, and the TWRP was installed.
the phone wasn't root, but I had the TWRP options (when push Volume up+bixby+lock) so thought I'm on the good way, but only after, and there is my mistake, I understood by reading something that I should make faster an operation when enabled the OEM (before it start to delete all my infos) that I should switch to recovery mode (or installation) and if not there was a story with 7 days to wait.
So the phone was just reseted with only memory card datas not deleted, and the phone was working, just the OEM always disabled, and when you select to enable it it says "ok we reboot the phone you will loose all your files etcc..." and anyway after many attempts, it says always the same after the reboots, and never is enabled after. So I tried to install a new rom, and then I thought I had a problem, in the installation it was written "Secure Check Fail : PIT".
So I tried to found the right rom, with the number "6" inside as per this screen :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then the Secure Check Fail : PIT dissapeared and now its just Fail in Odin.
Also, I tried to reboot normally but it says that there was an error and I need to reinstall with smart view or smart touch, I don't really remember, so I just reinstalled the first TWRP and now the screen of my phone is looping on Samsung, and rebooting.
I'm lost, I spent from 3pm to 4 am yesterday in the internet to found a solution, so my final option is write to ask your help guys.
Hope you can help me, thank you in advance
PS: Sorry for the big picture, there is no acceptance unfortunately for resizing codes, or maybe I just still don't have access to this option cuz I have less than 10 messages, if need delete it or explain me if you need pictures, I did it 10 min ago, even if there is not a lot to do because i'm limited with my phone now

Help to fix S7 bad flash

Hi Everyone Thans for having me Im stuck
My s7 froze and wouldnt do anything I managed to turn it off ,then it wouldnt boot ,after clearing the cashe and rebooting system it almost started but kept going to the android falling over ,
I read the options to sort this and tried to flash twrp recovery I seemed to go ok but when the phone rebooted it went to the An error has occured while updating the device software screen ,
I have tried smart switch but it does not see /connect the phone ,I can with a bit of messing with the buttons get from the An error /use the emergency recovery function screen to the ODIN Mode screen and the phone connects to odin But when i try to re flash the boot loader it flashes to the end then fails .
Am I right thinking Its the boot loader I need to get on 1st to get any further ?
Can anyone point me in the right direction ?
If ive posted in the wrong place please can you move
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Sounds to me, like part of the storage may have suddenly failed or been damaged, causing your device to lock up and after a reboot, triggering this unusual state. Part of the bootloader is likely not getting read or written to properly, so installing fails only after partially writing to the device, and it refuses to boot. You could try a repartition and complete installation - that might also make it worse though. I've seen the blue screen of mild annoyance many times - not sure about the falling android, was there any text? If so, what did it say? The firmware does contain screens for various diffrent panic states, resembling the one you mentioned. I would encourage you to do some more research on those and look for patterns in the way it fails - or doesn't - when flashing other parts of the firmware package. Don't even bother with SmartSwitch - in my experience, it fails at anything the errors tell you to use it for. Also, simple issues like a faulty cable or the wrong firmware can often be overlooked - so make sure those are fine before starting to experiment.