Hello guys,
I'm new here, I've read a lot about your different topics and I'm admirative for some level god members with their answers :good: :laugh:
Indeed I'm a dev, but for websites so it's a bit different with phones for me, and I will try to explain as detailed as I can.
I have a samsung SM G965F, bought in Poland (I work here for the moment); And indeed tried to root it for private purposes.
I followed a tutorial; I was on Pie 9 (****tiest ever update for me); from there OEM in DEV tools was activated, and the TWRP was installed.
the phone wasn't root, but I had the TWRP options (when push Volume up+bixby+lock) so thought I'm on the good way, but only after, and there is my mistake, I understood by reading something that I should make faster an operation when enabled the OEM (before it start to delete all my infos) that I should switch to recovery mode (or installation) and if not there was a story with 7 days to wait.
So the phone was just reseted with only memory card datas not deleted, and the phone was working, just the OEM always disabled, and when you select to enable it it says "ok we reboot the phone you will loose all your files etcc..." and anyway after many attempts, it says always the same after the reboots, and never is enabled after. So I tried to install a new rom, and then I thought I had a problem, in the installation it was written "Secure Check Fail : PIT".
So I tried to found the right rom, with the number "6" inside as per this screen :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then the Secure Check Fail : PIT dissapeared and now its just Fail in Odin.
Also, I tried to reboot normally but it says that there was an error and I need to reinstall with smart view or smart touch, I don't really remember, so I just reinstalled the first TWRP and now the screen of my phone is looping on Samsung, and rebooting.
I'm lost, I spent from 3pm to 4 am yesterday in the internet to found a solution, so my final option is write to ask your help guys.
Hope you can help me, thank you in advance
PS: Sorry for the big picture, there is no acceptance unfortunately for resizing codes, or maybe I just still don't have access to this option cuz I have less than 10 messages, if need delete it or explain me if you need pictures, I did it 10 min ago, even if there is not a lot to do because i'm limited with my phone now
Related
I bought a ebay Garminfone (it's my second) and it came with 1 attempt left to enter the code. I've ordered the code, but I wanted better odds than 1 try.
Hold D-Pad left while powering on. Hold D-Pad LEFT until the next line appears:
"Wipe userdata" appears on the screen. It can take a few minutes to run its course.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It wipes EVERYTHING off the phone. Just be warned.
I did a Master Clear when it restarted, just for good measure. I have no idea if I needed to or not. I had a T-Mo SIM card (unregistered) to be able to access the Master Clear section. It may work without doing the Master Clear.
But it does reset the counter to 10 tries!
This process may even work on a HARD LOCKED phone that shows 0 attempts left, but I have not had cause to try that. This method wipes everything on the phone and restores it with the hidden/secure recovery image. Hard Lock seems to be a software issue, which can probably be changed with this method.
After I did this, I changed the .update file to the Canadian one for Videotron. The 10 tries stuck!
I am just waiting for my unlock code to give it a try.
I think it's pretty safe to buy used phones that claim not to read the SIM card etc now. Updating the old 1.6 version to 2.1 fixes that. D-Pad left + power fixes almost everything else.
This process should be able to recover from anything except if you've screwed up the bootloader or the hidden recovery image.
this method does not work on my hardlock phone, i try to update but no sucess, it hang up after rebooting in the first line until i remove battery pls any one know solution to this
segun4u said:
this method does not work on my hardlock phone, i try to update but no sucess, it hang up after rebooting in the first line until i remove battery pls any one know solution to this
Click to expand...
Click to collapse
pls someone help me here, i have code to unlock but phone is hardlock,
Hello, I'm new to xda, it's true that I came before looking for ways to root my mobile, custom roms, etc.
But this is the first time I create a post (If this post does not go in this section please change it)
I'll explain what happened.
My mother-in-law about 1 year ago I give a BGH JOY X5 to my wife, this device has an android 5.1.
Question I wanted to download the google play store app called "DayDream" but it was not compatible with my android version, so I decided to change the android view to 7.0 with "Root Essentials" editing the build.prop, so it was, I edited it and it was successful.
After that, I decided to turn off and turn on the phone, but when I turned it off constantly "x application has stopped" so constantly with everything, I could not open any application, I decided to restore the factory values of the phone to see if that solved it but got worse...
Now turn on the phone, but after selecting a language, it is loading and the poster "x application has stopped" (with "x" I mean any, play services, messages, etc.)
Try entering the recovery mode, keeping the keys "Volume down + power" and I got a menu let's say "Chinese" started playing there and I just found this ...
BB Chip: MT6735
MS BOARD: ZTE_Blade_V580
And other information if I can attach image ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Down that puts ...
Android View: 7.0
SW See: BGH_Joy_X5_ARBGH_1.04
Custom Build Verno: unknown
And another info
Seeing this I decided to download a ZTE Blade v580 rom as it puts me there, but when it comes to connecting the phone does not recognize me and I can not flash it.
Download and install the Mediatek drivers (MTK) and recognize it
Enter the recovery mode and delete the cache and data from there and nothing, remains the same.
Is there any way to return the android to 5.1 that came?
Why the pc does not recognize the mobile?
Thank you so much.
Hi
Does download mode work
I am editing this post as I have become more educated in the last three months since I made the original.
I bought a broken phone. It had a bad battery and could not switch on in order for the phone to be reset. Neither could the seller provide me with any account info in order to remove the account before or after the reset was done I bought the phone from a repair shop as it was abandoned by the first owner as it was deemed uneconomical by them to repair.
I have replaced the screen and the battery with OEM items and have been trying for 2 months to get the phone unlocked.
Details that may be important
P30 ELE-L09
EMUI 10.1
What I have tried:
Every tutorial on YouTube related to P30 FRP lock and EMUI 10, and even some for other related Huawei devices like P20 and P30 lite.
I have tried eRecovery methods of update and restore, USBOTG method to update and both downgrade firmware. Everything fails. The recovery has buttons for emergency backup, but if I select this it reboots the phone back to the OOB setup. Also if I try to reboot to Safe mode, it does the same thing just in Safe mode.
HiSuite Proxy. @IProfessor This is still where I have issues as I feel that this is the most likely to succeed. Sadly every time the firmware reaches the point it will begin to install, it stalls and fails. I have logged it and will post them up here.
I believe the FRP lock is blocking me from resetting this device somehow, I just cannot figure out how and how to circumvent it. I am am being patient and I have time, the phone is not for daily use, yet.
Deleted.
New update
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The process fails after the files are decompressed
Up.
Anybody with a solution that doesn't involve paying for it?
I'm looking for an answer too..
I took the phone to my local cellphone repair guy.
He had a guy that flashed the firmware directly to motherboard. The only downside is these guys sometimes use the wrong region firmware, as is my case.
Total spend was R350 ZAR.
P.S. are you not also on the vwclubsa forum?
A few weeks ago, my hidden Magisk Manager (hidden as "Settings") stopped working. When I try and launch the generic Settings app it sets up, I get the normal FC menu ("Settings keeps stopping") error. I also get it when I open up any app that I previously allowed root access to, but obviously I cannot add new apps superuser access. I also get the FC every time I reboot the phone.
I haven't updated my OnePlus 9 Pro since the ColorOS 12 update came out, as 1) was not a fan, and 2) everything I read said I'd need to wipe the phone to get root back. Needless to say, it's been a while. My phone is currently on the 11.2.10.10.LE15AA version.
This just started happening one day, but I have no idea why. I am not sure what version of Magisk I am on, because I can't open the app. I also tried downloading the latest and installing the APK, but when I launch it, it's says things need to be "fixed" and to reboot. I then get the choice the normal Magisk installer brings up. I tried doing a direct install, but it failed. I also tried to restore the boot image, but it said the backup wasn't found (never seen that either, as I restore images every time I do an OTA).
Not sure what to do at this point. I'm at a complete loss. I would appreciate any help you guys can provide!
Do a LOGCAT to get the very reason why Magisk is not working.
I tried to get it as quickly as possible to minimize clutter, but it's still pretty long. I believe I've found where in the log the FC I captured (by looking for "zygote", but not sure what to make of it. It sounds like a file or something is missing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Doesn't seem like the logcat file got attached.
Oh well, here's a link:
FilePost
filepost.io
Hi Everyone Thans for having me Im stuck
My s7 froze and wouldnt do anything I managed to turn it off ,then it wouldnt boot ,after clearing the cashe and rebooting system it almost started but kept going to the android falling over ,
I read the options to sort this and tried to flash twrp recovery I seemed to go ok but when the phone rebooted it went to the An error has occured while updating the device software screen ,
I have tried smart switch but it does not see /connect the phone ,I can with a bit of messing with the buttons get from the An error /use the emergency recovery function screen to the ODIN Mode screen and the phone connects to odin But when i try to re flash the boot loader it flashes to the end then fails .
Am I right thinking Its the boot loader I need to get on 1st to get any further ?
Can anyone point me in the right direction ?
If ive posted in the wrong place please can you move
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sounds to me, like part of the storage may have suddenly failed or been damaged, causing your device to lock up and after a reboot, triggering this unusual state. Part of the bootloader is likely not getting read or written to properly, so installing fails only after partially writing to the device, and it refuses to boot. You could try a repartition and complete installation - that might also make it worse though. I've seen the blue screen of mild annoyance many times - not sure about the falling android, was there any text? If so, what did it say? The firmware does contain screens for various diffrent panic states, resembling the one you mentioned. I would encourage you to do some more research on those and look for patterns in the way it fails - or doesn't - when flashing other parts of the firmware package. Don't even bother with SmartSwitch - in my experience, it fails at anything the errors tell you to use it for. Also, simple issues like a faulty cable or the wrong firmware can often be overlooked - so make sure those are fine before starting to experiment.