Hi,
First of all many thanks to Christian Troy for some exceptional work done regarding Allwinner A10 tablets. I really appreciate the hard work done by him for the CM10 Build but from the past week I am badly stuck on one issue that if some one can please help me out! I am a newbie noob here and I managed to follow his thread for Allwinner Development and Unofficial Cm10 Thread by the help of which I am able to Install CWM and his CM10 JB Update onto my Tablet but the Touchscreen fails to work. I have manged to obtain following things:
1) Touchscreen drivers and all relevant files from Root Explorer from my A13 MID
2) Original .img Firmware
3) Auto Update Creator with which I tried the Compatibility zip Package to port the drivers
Till date from past 1 week I am trying to get the ROM and since Mr Troy has left work on the ROM Development further I am stuck badly as I have all necessary stuff for the Zip Package for Compatibility Zip file which has necessary drivers. I have tried a lot flashing but it fails. So Please if any one can help me out so that I can use CM10 on my tablet finally. So Close yet so Far but I am hopeful if some one here can help. Since this is my first post here I only had this option to post.
Thanking You & Regards,
Dilmeet
I'm facing the same problem... Did you find a solution to it?
er.dilmeet said:
Hi,
First of all many thanks to Christian Troy for some exceptional work done regarding Allwinner A10 tablets. I really appreciate the hard work done by him for the CM10 Build but from the past week I am badly stuck on one issue that if some one can please help me out! I am a newbie noob here and I managed to follow his thread for Allwinner Development and Unofficial Cm10 Thread by the help of which I am able to Install CWM and his CM10 JB Update onto my Tablet but the Touchscreen fails to work. I have manged to obtain following things:
1) Touchscreen drivers and all relevant files from Root Explorer from my A13 MID
2) Original .img Firmware
3) Auto Update Creator with which I tried the Compatibility zip Package to port the drivers
Till date from past 1 week I am trying to get the ROM and since Mr Troy has left work on the ROM Development further I am stuck badly as I have all necessary stuff for the Zip Package for Compatibility Zip file which has necessary drivers. I have tried a lot flashing but it fails. So Please if any one can help me out so that I can use CM10 on my tablet finally. So Close yet so Far but I am hopeful if some one here can help. Since this is my first post here I only had this option to post.
Thanking You & Regards,
Dilmeet
Click to expand...
Click to collapse
Hi Dilmeet,
I am facing the same problem of touchscreen not working on my A13 tablet. Did you find any solution to this?
Thanks is anticipation.
Regards,
Swaran
Left Android
swaran.fca said:
Hi Dilmeet,
I am facing the same problem of touchscreen not working on my A13 tablet. Did you find any solution to this?
Thanks is anticipation.
Regards,
Swaran
Click to expand...
Click to collapse
Got till building compatibility zips but stopped there after
help required to move further
Hi Dilmeet and Swaran,
Thanks for posting your experience.
Can you please give more details how you extracted the system files and for theCM10 ROM did you use any repository and build the ROM, can you put the details process you followed so that it can help to go move further.
I posted my detail post what i did till now.
http://forum.xda-developers.com/showthread.php?t=2094618
Can you please reply , so that i can give some help in your process too.
Thanks,
bhattu.
hi guys im bit new to this
right i have a allwinner a13 tablet and i installed a app called z4root i never heard of it thought i would try it well!!! my device is now rooted and i can not reset to factory setting i cant install any apps it keeps booting up as if its the first time and to top it all off it doesnt recognise the internal sd card which on the a13 you have 2 internal im really stuck can anyone help ....... im a linux guy not windows
Hi,
I have new UG802 bricked after a flash update.
If I connect the dongle at TV I see the image of "recovery system 4.2"
If I choose to update the firmware from a file does not work. Android gives me error and I can not go on as a photo 1, 2 and 3.
I tried to load the firmware Finless 18 with a single zip file that have system.img compressed.
I have see more post in this site with a procedure for unbrick with use a reset pin but in my PBC board don't have a reset as a youtube guide http://www.youtube.com/watch?v=4dlQkaDcgSY
Can you help me please?
Thanks
I have also used the original firmware http://www.ugoos.tv/ but I have the same problem.
answer from a noob
well, why don't you uninstall it and continue to use the original one while waiting for some some solutions coming out. sorry ,I'm a noob ,it's the best I can do .
Hasoffer said:
well, why don't you uninstall it and continue to use the original one while waiting for some some solutions coming out. sorry ,I'm a noob ,it's the best I can do .
Click to expand...
Click to collapse
I would like to follow your advice but I can not update the device. Does not make me load a firmware of any kind. I would like some advice on how to make at least a firmware reload and restart it.
Hello everyone, I have a serious problem with my tabled. Last night I wanted to install a custom rom. After all the research I have done , I found several custom roms for Onda V812 but nowhere was writing Allview 2 speed quad. Anyway, after installing the custom rom everything went perfectly fine untill i powered back on the tablet. The touchscreen does not work whatsoever. I have no idea what to do. My sister has the same tablet and I am currently doing a cwm backup , but I don't know how to flash the files back on my device without adb .. I use Pheonix Suit but apparently I can't flash CWM images.. I really need some help. Thanks :3
Smeeyx said:
Hello everyone, I have a serious problem with my tabled. Last night I wanted to install a custom rom. After all the research I have done , I found several custom roms for Onda V812 but nowhere was writing Allview 2 speed quad. Anyway, after installing the custom rom everything went perfectly fine untill i powered back on the tablet. The touchscreen does not work whatsoever. I have no idea what to do. My sister has the same tablet and I am currently doing a cwm backup , but I don't know how to flash the files back on my device without adb .. I use Pheonix Suit but apparently I can't flash CWM images.. I really need some help. Thanks :3
Click to expand...
Click to collapse
Hey,
I had exactly the same problem a few months ago. And after lenghtly discussions with their support, I managed to convince them to send me the factory image.
If you still have that problem, I can upload it for you tomorrow.
Btw, I also thought it was a V812 rebrand, but it isn't. The 2 speed Quad has an A31s, not an A31. I disassembled it to find that out.
b3nn0 said:
Hey,
I had exactly the same problem a few months ago. And after lenghtly discussions with their support, I managed to convince them to send me the factory image.
If you still have that problem, I can upload it for you tomorrow.
Btw, I also thought it was a V812 rebrand, but it isn't. The 2 speed Quad has an A31s, not an A31. I disassembled it to find that out.
Click to expand...
Click to collapse
I also need the image. Can you provide a link please? :fingers-crossed:
adypld said:
I also need the image. Can you provide a link please? :fingers-crossed:
Click to expand...
Click to collapse
Currently uploading.
Will take a while, however. Only 1Mbps upload speedand it's 600MBs...
b3nn0 said:
Currently uploading.
Will take a while, however. Only 1Mbps upload speedand it's 600MBs...
Click to expand...
Click to collapse
Here you go. Can be flashed with Phoenix Suite:
http://go4up.com/dl/1ECaVnG6FXj
MD5 Sum (of the extracted .img file): 6e0c45ac3b5deed034fdaf59195a6fb8
b3nn0 said:
here you go. Can be flashed with phoenix suite:
md5 sum: 6e0c45ac3b5deed034fdaf59195a6fb8
Click to expand...
Click to collapse
thanks! :d:d:d:d:d:d:d
well, I was searching too for an original firmware for this tablet.. last month I bricked mine too when I tried to install a Custom Onda v801s firmware, but I gave it to warranty.
Anyway, Thank you for uploading it :good: .
OFF: (Ro)
Apropoo, acum ca putem sa reparam tableta de fiecare data cand o stricam, a-ti gasit pana acum un rom cu android kitkat (4.4.2) pentu ea?
Din incercarile mele de luna trecuta, imi mergea touchscreen-ul doar de la un soft de Onda v801s V5, desi.. culorile se vedeau sacadat, in nuante inversate, oricum.. restul functiilor precum camera frontala (fara cea din spate), wifi-ul si conectarea usb-ului (mouse+tastatura) functionau.
Poate poate, exista o speranta :angel: .
hello.i have a problem with a tablet allview 2 speed quad , i tried to change the firmware with 4.4.2 kit for onda v812 ,but same problem touch not work.i instaled the softwer of b3nn0 but wifi not always work.download start after 5-10minutes.apps block ( screen remains black and blocked when start) on stand by , screen comes on alone , root not work ..how can i fix it? please help
Hey,
No idea how to fix it.
Wifi never worked when the screen was off for me. Not even when the device was new, so I considered it to be normal. You sure that this worked for you before?
The screen should usually not come on alone. It should do so only during charging (turns on when you plug it in, turns on when the battery is full) but usually it shouldn't.
Never tried to root the device. But when I use adb on it, I get a root shell, so it is somehow rooted by default. But apps can't get root, it seems.
allwiew 2 speed firmware
b3nn0 said:
Hey,
I had exactly the same problem a few months ago. And after lenghtly discussions with their support, I managed to convince them to send me the factory image.
If you still have that problem, I can upload it for you tomorrow.
Btw, I also thought it was a V812 rebrand, but it isn't. The 2 speed Quad has an A31s, not an A31. I disassembled it to find that out.
Click to expand...
Click to collapse
can you upload the firmware,please!!
Read the thread.. just a few posts above yours:
http://go4up.com/dl/1ECaVnG6FXj
You need to click on the URL, not on the "Download now" button and you will get it.
Problem with my Allview Speed 2 quad tablet
Heloo all,
I have a serious problem with my allview speed 2 quad tablet.After a restart my tablet always opened in recovery mode but in that menu i couldn't move down or up because the touchscreen seems that it doesn't answer to touch.I try different software and flash them with PhoenixSuit but until now i didn't find the right one.I try the original firmware(Allview2_M809Q5_20130903) from this thread but after i flash it the tablet open the software and the aplication but the touch doesn't respond to command.
I tryed all version of Onda v812 software:
-V812Core4_v1.35
-V812Core4-V1_v2.0
-V812Core4-V5_v2.0
-V812Core4-V5_v1.35,but in all those version the camera and the wifi motherboard isn t recognized by the Onda software so i can't use camera and WIFI.
Anyone can help me with a original software for this tablet or a modify image firmware that works on this tablet?
Strange. I had all these problems, too, when using the Onda firmwares. I tried all of them aswell.
At some point I just gave up and flashed the stock firmware posted above and everything worked again. No idea why it doesn't work for you...
b3nn0 said:
Strange. I had all these problems, too, when using the Onda firmwares. I tried all of them aswell.
At some point I just gave up and flashed the stock firmware posted above and everything worked again. No idea why it doesn't work for you...
Click to expand...
Click to collapse
can you make me a backup image after your tablet now and send me again?
I thought about something, what if we combine an onda rom which doesn't have a working Wifi/Camera but a working touchscreen (like V812Core4-V1_v2.0); with the original stock rom of this tablet (Allview2_M809Q5_20130903) ? Then we will finally have a good rom that is working on our Allview 2 speed quad.
So, as far as I watched tutorials, to have this custom rom of ours we will need to extract the softwares img files (both V812Core4-V1_v2.0.img and Allview2_M809Q5_20130903.img) into 2 folders (each one that will contain the System.img, Boot.img, Recovery.img ..etc); then we should replace the boot.img from the stock software (the folder obtained from Allview2_M809Q5_20130903.img) into the Onda's software (the folder from V812Core4-V1_v2.0.img); aaand then repack our Onda's modified software (or, let's say Our custom rom) into a new img that will be flashed with Phoenix.
The Boot.img that will be replaced contains the Wifi "drivers", so in this case the Wifi will work (I think...).
Also there are tutorials on youtube on how to do that. (eg "[HOW-TO] Create, Unpack and Repack update.img ROM on Windows ").
Now I just need an expert on android to tell me if what I said is possible... or... we will remain with our stock, laggy, disastrous firmware/rom from Allview.
Thanks a lot. It's like a new tablet
Help
b3nn0 said:
Read the thread.. just a few posts above yours:
You need to click on the URL, not on the "Download now" button and you will get it.
Click to expand...
Click to collapse
Can you please upload this (Allview2_M809Q5_20130903.img.bz2) again? The link is no longer available and i need this because i have the same touch screen problem after i tryed onda v812 rom.
mb707q5a33-v1.0? image file 4.4.4_r2a33-v1.0 alview speed quad
nu pot descarca,cine ma poate ajuta?
Hi all,
First of all: i am new here. And sorry for my bad English.
I have here a Voyo Q901HD with a new digitizer. Everything works fine but there is one problem. The whole touchscreen is inverted... I have tried everything... Change the system.prop, searching for flash again (but there is no firmware to found), reboot, reset.. But nothing helps...
More information about the Voyo Q901HD can you find here: http:*//*en*myvoyo.com*/chanpin*/pingban*/336.shtml or www*gearbest.com*/tablet-pcs/*pp_266237.html [remove the wildcards]
There is no defective with the digitizer: it works perfect and smooth but only in the wrong direction. There should be a possibility to change it correctly in a configuration file? I hope someone can help!
Thanx for helping and kind regards
Also the 'script.bin' is no option! Is not found on the tablet...
Ok, the problem is now totaly different. I tried to install a custom mod what maybe can fix the problem. I have WDM recovery installed. I have yet CWM recovery installed. The only thing that works... When i try to install a custom mod i receive error 7. But when i recovery my original image where i have make a backup from it does also not work... The backup maked with Smartphone Flashtool and MTK Droid Tool hangs on a sometimes flashing ANDROID logo on the screen... I use the Scatter file inside the image.
Hi @haajee86
I have that same Tablet that died on me !
the tablet is on a logo bootloop and there is no info or download tools for this 4G version of the tablet on VOYO site
So i would like to ask you if you are able to send me the stock rom ? or extract it from your tablet ?
i really appreciate it.
Thanks
Yes you can extract rom from tablet using MTK droid tools,then upload to needrom.com and i can modify parameter for you.
porting a rom lineasge os 14.1 for our galaxy core..done everything but just getting error due to update script..dont know what to do or include in it or it is due to update binary?......so can u help.me out of this ...and make a kernel for this device compatible with our galaxy core gti8262 ...i have done that but any help will be appreciated ..if everything goes right ..will upload rom in few days .....thanks ...
good news!(no updater process ended with error 6) now ..solved that after lot of headbursting things in updater script .......rom installed but not able to boot up now...anyone port a boot.img for this will upload the port rom's boot.img whenever someone responded to this ....
hit thanks if u want to help me!
good news!(no updater process ended with error 6) now ..solved that after lot of headbursting things in updater script .......rom installed but not able to boot up now...anyone port a boot.img for this will upload the port rom's boot.img whenever someone responded to this ....
hit thanks if u want to help me!