[Q] Help Required for Allwinner A13 MID - General Questions and Answers

Hi,
First of all many thanks to Christian Troy for some exceptional work done regarding Allwinner A10 tablets. I really appreciate the hard work done by him for the CM10 Build but from the past week I am badly stuck on one issue that if some one can please help me out! I am a newbie noob here and I managed to follow his thread for Allwinner Development and Unofficial Cm10 Thread by the help of which I am able to Install CWM and his CM10 JB Update onto my Tablet but the Touchscreen fails to work. I have manged to obtain following things:
1) Touchscreen drivers and all relevant files from Root Explorer from my A13 MID
2) Original .img Firmware
3) Auto Update Creator with which I tried the Compatibility zip Package to port the drivers
Till date from past 1 week I am trying to get the ROM and since Mr Troy has left work on the ROM Development further I am stuck badly as I have all necessary stuff for the Zip Package for Compatibility Zip file which has necessary drivers. I have tried a lot flashing but it fails. So Please if any one can help me out so that I can use CM10 on my tablet finally. So Close yet so Far but I am hopeful if some one here can help. Since this is my first post here I only had this option to post.
Thanking You & Regards,
Dilmeet

I'm facing the same problem... Did you find a solution to it?
er.dilmeet said:
Hi,
First of all many thanks to Christian Troy for some exceptional work done regarding Allwinner A10 tablets. I really appreciate the hard work done by him for the CM10 Build but from the past week I am badly stuck on one issue that if some one can please help me out! I am a newbie noob here and I managed to follow his thread for Allwinner Development and Unofficial Cm10 Thread by the help of which I am able to Install CWM and his CM10 JB Update onto my Tablet but the Touchscreen fails to work. I have manged to obtain following things:
1) Touchscreen drivers and all relevant files from Root Explorer from my A13 MID
2) Original .img Firmware
3) Auto Update Creator with which I tried the Compatibility zip Package to port the drivers
Till date from past 1 week I am trying to get the ROM and since Mr Troy has left work on the ROM Development further I am stuck badly as I have all necessary stuff for the Zip Package for Compatibility Zip file which has necessary drivers. I have tried a lot flashing but it fails. So Please if any one can help me out so that I can use CM10 on my tablet finally. So Close yet so Far but I am hopeful if some one here can help. Since this is my first post here I only had this option to post.
Thanking You & Regards,
Dilmeet
Click to expand...
Click to collapse
Hi Dilmeet,
I am facing the same problem of touchscreen not working on my A13 tablet. Did you find any solution to this?
Thanks is anticipation.
Regards,
Swaran

Left Android
swaran.fca said:
Hi Dilmeet,
I am facing the same problem of touchscreen not working on my A13 tablet. Did you find any solution to this?
Thanks is anticipation.
Regards,
Swaran
Click to expand...
Click to collapse
Got till building compatibility zips but stopped there after

help required to move further
Hi Dilmeet and Swaran,
Thanks for posting your experience.
Can you please give more details how you extracted the system files and for theCM10 ROM did you use any repository and build the ROM, can you put the details process you followed so that it can help to go move further.
I posted my detail post what i did till now.
http://forum.xda-developers.com/showthread.php?t=2094618
Can you please reply , so that i can give some help in your process too.
Thanks,
bhattu.

hi guys im bit new to this
right i have a allwinner a13 tablet and i installed a app called z4root i never heard of it thought i would try it well!!! my device is now rooted and i can not reset to factory setting i cant install any apps it keeps booting up as if its the first time and to top it all off it doesnt recognise the internal sd card which on the a13 you have 2 internal im really stuck can anyone help ....... im a linux guy not windows

Related

Help with Coby Kyros Internet Tablet MID 7005-4G

I am currently unable to boot my tablet. I had been trying some modifications designed for other tablets, and it messed up my tablet something good. What I need most of all is the framework.jar file located within the /system/framework folder on the tablet device. I have tried the framework.jar file from a Coby Kyros MID 7015 model tablet, but that does not seem to work for this tablet.
If you would like to help an need instructions, please reply and I will give you any instructions you need. Thanks to anyone willing to assist.
smh, where did you get the source from, I have the same tablet, and trying to find out how to root it.
Here you go from my mid7005 I just got
were you able to root your coby?
infinityhombre said:
Here you go from my mid7005 I just got
Click to expand...
Click to collapse
Hello,
Need help on my Kyros mid7005 4Gb. The problem Im having right now after I reset my device wont boot up only stuck in Coby Logo and it will stay there up to 2min. and turned off. I downloaded the update.zip from cobyusa.com and put it on my sd card and update from there will update it successfully but after I hit the reboot will not reboot just turns off. Don't know what to do next please help. Thank you.
Coby Kryos MID7005 not booting after factory reset
jhooper90 said:
I am currently unable to boot my tablet. I had been trying some modifications designed for other tablets, and it messed up my tablet something good. What I need most of all is the framework.jar file located within the /system/framework folder on the tablet device. I have tried the framework.jar file from a Coby Kyros MID 7015 model tablet, but that does not seem to work for this tablet.
If you would like to help an need instructions, please reply and I will give you any instructions you need. Thanks to anyone willing to assist.
Click to expand...
Click to collapse
Hello,
I am wondering if you could help me out if you have any idea how to fix my coby kryos 7005. I reset my tablet due to instructions given by cobyusa.com because of my appslib not working so they suggested to reset the device. I did what they said and after I reset it the device wont boot anymore and just stuck in Coby logo and turns off after 2min. I downloaded the update.zip from cobyusa.com and placed it on my sdcard and apply the update by pushing the power button and the home softkey at the same time and I did the procedure. After the update I restarted the device and still the same thing stuck in Coby logo. Any help will appreciate it. Thank you in advance.
Thanks for the help, infinityhombre. Unfortunately, I've went ahead with ANOTHER attempted update and I think I've completely bricked it this time. Before, the adb commands would work and the computer would recognize it, but not anymore. Now when I plug it in the computer asks for a driver and I can't find one that works. I can't even boot into recovery anymore. I've heard that FWDN (or was it PWDN?) was the software I needed and that it should have the driver I require, but I can't seem to find the software. Does anyone know of a download link for it?
coldjava, if I could help you, I would. I have yet to do any recovery or update that has actually worked at all.
If you accidentally used the mid7015 update.zip, you will probably have to ask coby to send you a full copy of the stock rom to fix it. Good luck with that.
Well, a 64 bit driver to use with the FWDN flashing software would help too.
Huzzah! I had found a download for a 64 bit version of the FWDN driver, and I was able to get my tablet flashed with a working OS. I found the driver on slatedroid, and I would include a direct download for it, but this message board won't let me post it. You just need to do a search for 'vtcdrv for x64 windows' on that message board if you need to find it. Everything else you need for it is included with the download for the rom for it.
could you point me in the direction of the rom you used...I'v found lots for the x5a just looking for one that is confirmed to work with coby 7005, does the rom include root and google market?
I am looking for the Coby 7005 rom also.. I'm also trying to figure out specifically which files need to be flashed for it. Does anyone have a screenshot?
I've given up looking, I have root, clockwork recovery, and market and feel more comfortable in the android environment now
Sent from my MID7005 using Tapatalk
I just bought one of these tablets for really cheap on ebay. The previous owner lost the password to it and I just planned on doing a factory reset on it. Unfortunately, the only support I can find from Coby is for the 7015, leaving the 7005 owners high and dry. If I could get a copy of the stock firmware, even just a dump directly from someone else's working 7005 that would be great. I bought this tablet specifically for my kids, so I just need to be able to run Angry Birds and watch movies on it.
Yes, the X5A-G works
Hey, I just got one of these (the 7005) which I will be returning to the seller since the battery doesn't charge but I can confirm that the CWM recovery image for the X5A-G does in fact work, as does the X5A-G Cyanogenmod ROM. No, by default it does not have the market, but grabbing the GAPPS zip from the cyanogenmod github (or practically anywhere else on this forum) will in fact install the market.

[Help Please!] Recovery ??

Hello everyone!
I have problems with Recovery for my tablet. I have no way to fix it. I hope people help me
My tablet is running fw 4.2.1 Asus, I am root but everytime you want to load CWM, the tablet show ERROR. Although I have tried to follow the instructions on the forums but have not been.
I find when in fastboot mode on tablet and see "not driver or no key,.." (I do not remember)
Help me fix it and sorry for my english.
Thanks
butoon said:
Hello everyone!
I have problems with Recovery for my tablet. I have no way to fix it. I hope people help me
My tablet is running fw 4.2.1 Asus, I am root but everytime you want to load CWM, the tablet show ERROR. Although I have tried to follow the instructions on the forums but have not been.
I find when in fastboot mode on tablet and see "not driver or no key,.." (I do not remember)
Help me fix it and sorry for my english.
Thanks
Click to expand...
Click to collapse
I think CWM is not working well with 4.2.1. I would try TWRP as custom recovery, but be very (as in VERY) sure to install the TWRP version meant for your bootloader. In General section you can find a very good how-to written by pjc21, which also list which bootloader and TWRP versions match. The guide is here: http://forum.xda-developers.com/showthread.php?t=2195883
Use that and don't forget to thank pjc21.

[Q] Help. I bricked my strange UG802 :(

Hi,
I have new UG802 bricked after a flash update.
If I connect the dongle at TV I see the image of "recovery system 4.2"
If I choose to update the firmware from a file does not work. Android gives me error and I can not go on as a photo 1, 2 and 3.
I tried to load the firmware Finless 18 with a single zip file that have system.img compressed.
I have see more post in this site with a procedure for unbrick with use a reset pin but in my PBC board don't have a reset as a youtube guide http://www.youtube.com/watch?v=4dlQkaDcgSY
Can you help me please?
Thanks
I have also used the original firmware http://www.ugoos.tv/ but I have the same problem.
answer from a noob
well, why don't you uninstall it and continue to use the original one while waiting for some some solutions coming out. sorry ,I'm a noob ,it's the best I can do .
Hasoffer said:
well, why don't you uninstall it and continue to use the original one while waiting for some some solutions coming out. sorry ,I'm a noob ,it's the best I can do .
Click to expand...
Click to collapse
I would like to follow your advice but I can not update the device. Does not make me load a firmware of any kind. I would like some advice on how to make at least a firmware reload and restart it.

[Completed] NEED HELP with my HP SLATE 6 VOICE TAB

please help my Hewlett Packard slate 6 VOICETAB..no one talk about it even i search it at google,
i;ve problem crash not STarting with this gadget.and im confused to choose what ROM should i use.
i already do the factory reset..but still not startin up..
please somebody could you help me..
thanks
Ikuza27 said:
please help my Hewlett Packard slate 6 VOICETAB..no one talk about it even i search it at google,
i;ve problem crash not STarting with this gadget.and im confused to choose what ROM should i use.
i already do the factory reset..but still not startin up..
please somebody could you help me..
thanks
Click to expand...
Click to collapse
Hi,
Please can you describe with more details and clearly what exactly is your problem?
Apparently your device is a Hewlett Packard Slate 6 voicetab - OS: JB 4.2.2
Is your device rooted?
Last operation made ?
Don't forget that you need to be more explicit when you need help
philos64 said:
Hi,
Please can you describe with more details and clearly what exactly is your problem?
Apparently your device is a Hewlett Packard Slate 6 voicetab - OS: JB 4.2.2
Is your device rooted?
Last operation made ?
Don't forget that you need to be more explicit when you need help
Click to expand...
Click to collapse
yes my device was 4.2.2
Rooted
last operation i used rom toolbox change ondemand rate (i forgot the name)but the usual number was 10.000..i changed it to 50.000,then checked the apply to boot..
and the build prob i change the dalvik.vm.heapsize..from 256m to 48m
and then it stuck when startup.:crying:
Ikuza27 said:
yes my device was 4.2.2
Rooted
last operation i used rom toolbox change ondemand rate (i forgot the name)but the usual number was 10.000..i changed it to 50.000,then checked the apply to boot..
and the build prob i change the dalvik.vm.heapsize..from 256m to 48m
and then it stuck when startup.:crying:
Click to expand...
Click to collapse
Can you tell me where have you downloaded your rom?
And apparently,you have changed the governor and the frequencies of your kernel.
The only solution is to use your nandroid backup for restore your last version.
I'm really sorry but we haven't forum or thread about your device.
I will tried to find something for helping you
philos64 said:
Can you tell me where have you downloaded your rom?
And apparently,you have changed the governor and the frequencies of your kernel.
The only solution is to use your nandroid backup for restore your last version.
I'm really sorry but we haven't forum or thread about your device.
I will tried to find something for helping you
Click to expand...
Click to collapse
i download the rom from the official HP support..(sorry i cant put the link bcause not have 10 posts)so i attach a screenshot.
i dont have back up from nandroid..im just change it and reboot the device..so i dont have the backup :crying:
yeah i search it but no one in the forum talk about this device
apreciate it for your help sir :good:
You need to post the URL of the HP site. Also, without a backup it's going to be pretty difficult. You're going to have to find the factory image somewhere on the web. You did some pretty serious modifications as Ikuza27 eluded to. Good luck
wirelesshead65 said:
You need to post the URL of the HP site. Also, without a backup it's going to be pretty difficult. You're going to have to find the factory image somewhere on the web. You did some pretty serious modifications as Ikuza27 eluded to. Good luck
Click to expand...
Click to collapse
yes..but i cant post url before 10 post..mybad..yea i still trying to find it..but no one work for this device on custom recovey or cwm..
i already try fastboot..try sdk android fast boot but no device detected because the fastboot stuck..then i try adb ..its connect to the PC .but i dont know what recovery.img must used..someone tell me to used the similar specification phone..but what device that smilar with this device
already try the official from the HP support..but still installation aborted when already half way to success..
i buy this device at 10 may ..but now it not worked :crying:
Ikuza27 said:
yes..but i cant post url before 10 post..mybad..yea i still trying to find it..but no one work for this device on custom recovey or cwm..
i already try fastboot..try sdk android fast boot but no device detected because the fastboot stuck..then i try adb ..its connect to the PC .but i dont know what recovery.img must used..someone tell me to used the similar specification phone..but what device that smilar with this device
already try the official from the HP support..but still installation aborted when already half way to success..
i buy this device at 10 may ..but now it not worked :crying:
Click to expand...
Click to collapse
I'm really sorry but I cannot help you more. I've tried searching a link for a factory image or something that it can help you, but except the HP website for support, nothing.
For your next device, don't forget to do a nandroid backup before to do something.

[q] how to flash zip file to device without cwm recovery

Hi XDA community
I have success create backup ROM from my rooted smartfren tablet hisense wm8 , I follow instructions from :
HOW TO COOK ROM USING DSIXDA KITCHEN TOOL -->http://howtorootcherrymobilesnap.wee...a-kitchen-tool.
And now I have wm8980s_signed_112714_111111.zip.
I want to help my friend at kaskus smartfren tab 8 community where some of them have a bootloop issue and some of them brick their tablet. My Minds is oke and running well.
My problems is wm8 is have no cwm installed, and I also tried search all thread from all site but there is no cwm recovery that match with this tablet.
So I need your helps how to flash that zip file to our wm8 devices that no cwm and in bootloop conditions ? In bootloop conditions adb not recognized device because can not setting usb debugging
Thanks in advance for all of your advise and supports.
No solution
sad, no one can help me.
I want to restore this tablet, using a backup that I made some time ago.
did not seem much point in me asking here. all requests for help me, none of them got the solution I expected.
waste of time posting here ..
Okay thanks XDA
warm regards

Categories

Resources