hi all
idont know why this happend , but the touch calibration is acting reverse !
i mean when i touch left on monitor it go to the right!
and also up goes down !
i must open notification bar from down to up !!
why this happend ?
what i must to do ?
thanks all.
pooya2ir said:
hi all
idont know why this happend , but the touch calibration is acting reverse !
i mean when i touch left on monitor it go to the right!
and also up goes down !
i must open notification bar from down to up !!
why this happend ?
what i must to do ?
thanks all.
Click to expand...
Click to collapse
There are two possibile causes of this problem:
1. Your screen isn`t calibrated anymore correctly. To solve it you have to go to the factory settings (password 126), calibrate the screen and save the buttons.
2. Your MCU does not react anymore. Unplug the HU from current and reconnect it. The problem should be solved.
Would be interesting to know by what manufacturer your unit was produced. My GS has sometimes the same problem.
Oberbergler said:
There are two possibile causes of this problem:
1. Your screen isn`t calibrated anymore correctly. To solve it you have to go to the factory settings (password 126), calibrate the screen and save the buttons.
2. Your MCU does not react anymore. Unplug the HU from current and reconnect it. The problem should be solved.
Would be interesting to know by what manufacturer your unit was produced. My GS has sometimes the same problem.
Click to expand...
Click to collapse
thank you for replay
i solve it by re configing touch and button setting
u know what was my mistake ? iwas trying to press first +2 and then +1 !! it was not correct !! first need to click +1 and +2
anyway , thanks for answering me.
Related
Hi,
I lost the function of my disconnect or hang up button, the red hardware one on the side of the device.
Does anybody knows the registry entry for this button.
I do have HKLM\Software\oem\Keys but i think there is not this one.
The key just does nothing anymore, the green one works fine.
Thanks for helping,
Thomas
may be its a hardware screwup... did u drop ur exec ??
its allright again...
To my shame, I did not push strong enough several times... It works but needs to be pushed strongly. After breakfast it was much easier ;-)
So thanks, but IT WORKS!!
If I would know how to close a thread I would do so...
Thought my button was spoint too, but didn't push hard enough too.
Glad you manage to solve the problem, with some "energy". haha.
me, too...
Thomas said:
Hi,
I lost the function of my disconnect or hang up button, the red hardware one on the side of the device.
Does anybody knows the registry entry for this button.
I do have HKLM\Software\oem\Keys but i think there is not this one.
The key just does nothing anymore, the green one works fine.
Thanks for helping,
Thomas
Click to expand...
Click to collapse
Recently i am facing similar problem.Anyone know how to set this right. The red button just doenot disconnect a call or close the dialpad.
Have same problem. Touch screen button works, but hardware not. only reflashing cures the problem for me....
Not all Roms fail here thou
Optika said:
Have same problem. Touch screen button works, but hardware not. only reflashing cures the problem for me....
Not all Roms fail here thou
Click to expand...
Click to collapse
I think there is a registry tweak but i am unable to find it.
all it needs is a restart!
this happens to my device sometimes that one of both of the keys stop functioning... they get fine after having a restart...
aniel1 said:
Recently i am facing similar problem.Anyone know how to set this right. The red button just doenot disconnect a call or close the dialpad.
Click to expand...
Click to collapse
Please help me out!!!! i flashed my m600 with the G4 ROM and since then i can not turn on the phone or get it into bootloader please can anyone help me out? it would be a huge help is there any way to save my spv?
I have the same prob. Did you fix it?
crossy4life said:
Please help me out!!!! i flashed my m600 with the G4 ROM and since then i can not turn on the phone or get it into bootloader please can anyone help me out? it would be a huge help is there any way to save my spv?
Click to expand...
Click to collapse
What happens when you turn the device on ? Does nothing happen or do you get a white screen or something like that?
Da9L said:
What happens when you turn the device on ? Does nothing happen or do you get a white screen or something like that?
Click to expand...
Click to collapse
Hi,
I have this problem too and I got "the nice white screen of death".
The phone's working (can recv calls) but the white screen...
The press and hold the red btn is not working in this case and I thing it could be HW problem.
Now the device is in the drawer waiting solution!
Did You find?
B.R.
George
If you can receive calls, It may be a hardware problem. Try entering bootloader to see if it still displays the white screen. If it does, try a hard reset, and if that fails, try reflashing a ROM (It shouldn't matter that you can't see what's happening on the device as you should be able to control it all from the computer).
If all that fails, I think the most likely cause is a loose connection between the screen ribbon cable and the device mainboard.
Thanks,
The white screen remains after hard reset , after reflashing rom and after changing the LCD with the working one.
The ribbon connector is prooved !
Because of the block diagram showing that CPU is directly connected to the LCD I think it could be the CPU. But if the CPU is malfunctioning the whole device must be dead!!
That is why I try to find some scheme to observe the connection but ... nothing on the net!
The other one is to change the CPU ( I have the other one not working Prophet) but at the test I could receve an error msg because of the chaged CPUs ID.
Do you have any idea what is better to do!?
Waiting
l3v5y said:
If you can receive calls, It may be a hardware problem. Try entering bootloader to see if it still displays the white screen. If it does, try a hard reset, and if that fails, try reflashing a ROM (It shouldn't matter that you can't see what's happening on the device as you should be able to control it all from the computer).
If all that fails, I think the most likely cause is a loose connection between the screen ribbon cable and the device mainboard.
Click to expand...
Click to collapse
Hi, my htc polaris touch screen started acting strange today. Touch screen do not respond or when you touch it it randomly respond with a random command (not the one I intended to) There is no crack or physical damage. Hardware buttons seems to respond correctly. (By the way the picture on the screen is ok, I mean you see what you supposed to see, it just doesn't respond)
Anyone had similar problem? Can you advise me what to do? Thanks
nycBulent said:
Hi, my htc polaris touch screen started acting strange today. Touch screen do not respond or when you touch it it randomly respond with a random command (not the one I intended to) There is no crack or physical damage. Hardware buttons seems to respond correctly. (By the way the picture on the screen is ok, I mean you see what you supposed to see, it just doesn't respond)
Anyone had similar problem? Can you advise me what to do? Thanks
Click to expand...
Click to collapse
use CalibrationData to fix it
i figured out that by changing sttings/home/theme from htc to windows default, screen started responding. So it looks like a software failure (theme called htc). I am still interested in a better solution.
Hakim Rahman said:
use CalibrationData to fix it
Click to expand...
Click to collapse
Can you briefly explain how to use it? (In the meantime I hard reset and I still have this problem)
nycBulent said:
Can you briefly explain how to use it? (In the meantime I hard reset and I still have this problem)
Click to expand...
Click to collapse
just with extract and import files CalibrationData.reg using Resco registry to your device
hello guys.. i have a problem on my handset... my handset touchsreen is not responsive/accurate.. if i press example facebook icon suddenly it press other apps/icons T_T
rjbiona13 said:
hello guys.. i have a problem on my handset... my handset touchsreen is not responsive/accurate.. if i press example facebook icon suddenly it press other apps/icons T_T
Click to expand...
Click to collapse
Good advice would be uninstalling the FB app completely, its a very poorly built app with many bugs. Just use FB with a browser if you can. Regarding your touch issue i can`t help you as i got the phone only yesterday. Usualy a data factory reset of reflashing the firmware should lift the issue. If this doesn`t help it could be a hardware isssue.
hy guys, i hope i´m right here and sorry for my bad english.
i have a problem with my car radio unit.
i need little bit help.
the unit goes on but it come only white screen with colored fields but the touchscreen have function... if i touch the screen colore change.
i think it have crashed ROM ore firmware failure.
can anybody give me good instruction to let be run this unit?
i make hardware reset but whithout change .(
THX