Related
Hi all,
Almost everytime I check the forum I see a lot of rom upgrade & BIG Storage questions. Apparently not everyone is familiar with the wiki and search options on the board. That's a shame cause almost all the questions are answered in the already existing threads. So why a new thread about the same topic?
1. I'm chauvinistic and want my name on the board ;-)
2. To aggregate a part of my knowledge in one place for easy access.
3. To promote the wiki
- So if you tried to upgrade your rom and got an error 120: follow this description http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
- If you failed in upgrading your rom somehow & now you're stuck in the bootloader: just make sure usb connections are allowed in Active Sync, connect your magician with usb to your PC and run the rom upgrade program again.
Sometimes it helps at this stage to downgrade ActiveSync to version 3.8 (see the post from benenglish).
- If you need to go to bootloader for any reason (including incorrect rom upgrade) press 'camera, power and soft-reset' all at the same time for some seconds, till your screen fades and reads: Serial V1.0x. When you connect it to usb it should read ' usb V1.0x
- If you want to change the language from your magician (not including from or to Greek, cause those roms and devices are protected), just use http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade again.
- If you want to flash your magician with a charmer or any other rom, please don't you will loose your device when you kill your bootloader and that's very likely to happen while flashing a not suitable rom.
- Want a WWE BIG Storage rom the easy way? Follow http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade and download ftp://xda:[email protected]_NK.nbf/BIG_Storage_nk_for_rom_1.13WWE.zip This NK.nbf is patched for BIG Storage, you only need to put it in the directory with the extracted shipped-rom.
- Want a BIG Storage rom in any language the easy way? Download a shipped-rom from the ftp or any telco and follow http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
- Want to get BIG Storage via a SD Card flash, read it here http://wiki.xda-developers.com/index.php?pagename=MagicianSDflash
- Don't know what BIG Storage is? It is your ext-rom (with the operator customization cabs) exchanged for a larger internal Storage folder. So remember to backup those cabs before upgrading.
- When you want to revert from BIG Storage to the original Storage and ext-rom combination, make sure you put > 8MB data in your Storage folder before flashing it back with a normal rom. Otherwise you'll loose your Storage folder completely :-(. Seems that this might be a solution & doesn't work for everyone. Try it if reverting with empty \Storage folder isn't successful.
Any questions left, I guess so. Now don't be scared and put them on the board, nobody is going to eat you (at least not straight away) and someone will answer.
But remember that when this topic is still visible in the first page of this board I will probably stop answering new threads about BIG Storage and rom upgrading questions, I've done that for 5 months now and I'm starting to loose my interest.
Regards, M
Ps If you're really stuck in a rom upgrade & can't get it working, last resort is to pinpoint me to a location where I can download your rom-dump or the shipped-rom & I can prepare it for you. All it takes is a cup of coffee on my, for now, virtual world trip. Got Italy, Cyprus, Argentina, Asia, UK, Germany, Belgium, Greece, Turkey & US allready. So if you're living in any other country, especially Indonisia, Australia or New Zealand, be my guest.
Great job OLTP..
Your the man :lol:
- If you failed in upgrading your rom somehow & now you're stuck in the bootloader: just make sure usb connections are allowed in Active Sync, connect your Magician with usb to your PC and run the rom upgrade program again.
Click to expand...
Click to collapse
AND USE ACTIVESYNC 3.8
My upgrade was stuck at this stage - removed Activesync 4.0 - Installed 3.8 and ran the firmware update again - its now "Upgrade Radio Stack - Please wait" with the progress bar going along on the screen.
Hope this helps
I've heard/read more complaints about Act.Sync 4.0. Though 4.0 is working flawless on my side, every contribution that works is valuable information. I updated the first post with it.
Thanks
Big storage
I did a big storage for my Mini by using a copy of my rom, changing the bytes as told in the guide to upgrading with a HEX Editor. I have installed programs to new storage gained but my main memory is showing very little memory. I have no programmes installed in main memory. What should I do now ?
How much memory have you got free. I got now, on my fully loaded device, 9.6MB storage & 22.5MB program memory occupied.
Did you happen to load all the cabs you copied from your ext-rom again? Those cabs install in RAM.
Cheers, M
stotage lost
pls help... i lost my storage when i flash my mini in my stock shipped rom i followed instruction of olps to soted data at least 8mb of files but it didnt works still lost my storage...
how can i back it again..is there any hope?..
thanks
First thing to do is to load the BIG Storage rom again. This should give you back the \Storage folder.
Now did you use the same rom version for BIG Storage as your original rom version? Some do claim it needs to be at least the same country version.
So pls try to revert to the same version only without BS & you can always try with an empty \Storage folder.
Seems that some tricks work out different on several devices.
Good luck, M
First thing to do is to load the BIG Storage rom again. This should give you back the \Storage folder.
Click to expand...
Click to collapse
thanks i got my storage is back...
Now did you use the same rom version for BIG Storage as your original rom version? Some do claim it needs to be at least the same country version.
Click to expand...
Click to collapse
yes i flash it wid the same version i followed the instruction on your post to be able to back the extended rom..
ill try again for the 2nd time...ill post if i succed
many thanks oltp
Can I upgrade my Mda compact 2 also with a sd-card like the compact ?
When I make a hardreset with the card in the slot, i cannot chosse to install from sd-card.
That's something I don't know. Try one of the board's for WM5 devices like the Wizard. Maybe you can find your info there.
Success, M
[edit] could you append it here too pls, if you find it?
Hi OLTP,
Right now I have 8.04mb free in storage memory (big hack). In MAIN memory around 3.10 mb in program memory (in use 23.47 mb). Storage (main) - in use 28.29 mb and free 2.55 mb. This keeps going less and less so from time to time as I use and close programs. So I keep doing a soft reset. I get critical memory short error. What do I do.
Should I flash with my saved original ROM (the one I had before doing the hack) and then immediately flash the saved Big Rom ? Please let me know. You are the Guru.
@ Galahad: What kind of software did you install after the update? & how's the memory pressure right after a hard-reset (don't forget to make a proper backup first)?
Do you use cabinstl to install cabs to another location then 'default' (which is RAM)? & tell Act.Sync to install to Storage or Storage Card, otherwise your RAM will be used up very soon.
My advice no need to reflash right now, a hard-reset should be sufficient to see what is causing your prob.
M
After the hack I had installed couple of commercial software, all into storage memory thru active sync which prompts you where you want to install. I choose storage memory (26.92). I keep doing this for all the commercial software I need to install. When I finished doing this I had 6 mb free. so far so good. Then I started installing cabs files from Ext Rom copy on harddisk, with cabinst. These were smart dial cab, O2 connect and a few other (which I thought necessary) cab files. These too I installed into storage memory. If my memory serves me right, I started experiencing a sudden slide down in memory after this. Before this I had around 25 mb memory free. Then suddenly the slide down in memory. In fact Resco today plug in shows me the dramatic slidedown as if the memory is getting sucked down a black hole.
I will do a hard reset as suggested by you and then load my software into storage memory. This time I will not install cab files from Ext Rom. Is that OK ?
Your O2 software is def. causing your probs. If you need some apps from it, try WinCECabManager. With it you can see which files are stored where on your device. After cab installation you can move them to eg. \Storage\Windows & change all links & reg keys referring to those files. Or change tea cab-file of course. It can take some time, but ves a huge amount of RAM.
M
Thanks ! I will try your suggestion. Have never used WINceCab Manager. Hope it is not too technical.
Not for me, it's a bit like explorer. But then again I'm not standard.
Some good news !
Like I said, I had around 24 mb free memory after the big storage hack (after installing all applications, whether in storage memory or storage card).
The good news is that all my FREE MEMORY has come back. Don't know really how it happened. I was using my blue tooth device which I switched thru the icon on the screen bottom right.
In error I touched the icon to rotate screen orientation. When I finally got my orientation correctly, I also got all my lost memory.
IMAGINE THAT !
Thanks for all your quick responses and great help you gave me. I will surely emulate you helping ways.
oltp said:
Hi all,
- Want a WWE BIG Storage rom the easy way? Follow http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade and download ftp://xda:[email protected]_NK.nbf/BIG_Storage_nk_for_rom_1.13WWE.zip This NK.nbf is patched for BIG Storage, you only need to put it in the directory with the extracted shipped-rom.
But remember that when this topic is still visible in the first page of this board I will probably stop answering new threads about BIG Storage and rom upgrading questions, I've done that for 5 months now and I'm starting to loose my interest.
Regards, M
.
Click to expand...
Click to collapse
Dear OLTP, I am not able to find the patched nk.nbf on the ftp. Kindly check it is not there.
When I use nbfdec.exe for decoding the NK.nbf it gives me crc error and the decoding fails. whereas with the same set of NK.nbf,ms.nbf and radio.nbf I have success fully upgraded my magician to WWE1.13 with radio1.13 Kindly help
My brother done a funky think on his X500. He tried to update his OS but he used a OS from M900. I told him that he might have "killed" the device, but still I'm trying to give him a hand, hope someone out there can help me as well.
The idea is:
- I've downloaded 6 original eten x500 rom
- I've changed the "magic bytes" using a hex editor - XVI32
- I found in this forum how to update the ROM using the SD or USB method
- I folowed the metod and on both on them I have the next message:
"bootloader programmed ok
knight progtamed ok
eboot programmed ok"
and after aprox 10 seconds i have the next message: "OS program not complete" and the device stops
If I do a reset I have a blank screen.
I have talked with some people to help me, they said that one of the reasons for this problem is that trying to flash a 90MB rom on a 128 MB ROM (a normal x500 file is 60 MB) and the file being to big it over write a vital part of rom. If I try to flash an original rom, the part overwriten first time won't be changed and still remains damaged. A solution would be writing the whole rom, not just the OS. But I couldn't find a method to load the ROM image and a image of the original ROM, the whole 128MB.
Any response is welcome.
Thanks in advance.
hi guys, can somebody help me to solve my problem when I flash my websong n8000 (same like star n8000).
what I've done doesn't meet any success.
I've try to flashing whole rom that can be found in http://forum.xda-developers.com/showthread.php?t=1695210&page=1
and i also have change the display setting using SPMDT but it didn't work
my screen still black but it is booting and the touch screen is also working.
Help me guys.
hi mate, i had the same problem with you..do you have the answer for this problem ?
Display Contrller problem for N8000
Me Too. I got this phone with a July 27 version.
I did not want it since the internal 2GB cannot be used with App2SD.
Flashed with July 5 firmware using SPMDT and was able to succesfuly downgrade.
But now screen is totally wrong colors. Mostly black, but still able to see the UI, just that no colors. Just black and pink.
I hope somebody helps us in this thread since we cannot post in the official N8000 thread if we are a new user.
jpalpano said:
Me Too. I got this phone with a July 27 version.
I did not want it since the internal 2GB cannot be used with App2SD.
Flashed with July 5 firmware using SPMDT and was able to succesfuly downgrade.
But now screen is totally wrong colors. Mostly black, but still able to see the UI, just that no colors. Just black and pink.
I hope somebody helps us in this thread since we cannot post in the official N8000 thread if we are a new user.
Click to expand...
Click to collapse
Hi, I have this Star N8000 and been doing help videos on youtube over the last 2 weeks. I was able to put apps on the 2GB by going to Settings->App->and I select (Move to USB Storage). I have a 32 GB micro sd card. with my media installed. I moved as many apps off the 512 that I don't need as it will slow the phone down. As for you guys issues, I would recommend not flashing any rom on the device. There is just not enough info to properly identify it. You can either go by led flash position. The Haipai version is the same internal and for some reason its more easy to identify but its running the same MTK 6575 Single Core 1 ghz processor as the Star N8000. The Roms are optimized for the extra screen size so that explains it.
Iph0ne27 said:
Hi, I have this Star N8000 and been doing help videos on youtube over the last 2 weeks. I was able to put apps on the 2GB by going to Settings->App->and I select (Move to USB Storage). I have a 32 GB micro sd card. with my media installed. I moved as many apps off the 512 that I don't need as it will slow the phone down. As for you guys issues, I would recommend not flashing any rom on the device. There is just not enough info to properly identify it. You can either go by led flash position. The Haipai version is the same internal and for some reason its more easy to identify but its running the same MTK 6575 Single Core 1 ghz processor as the Star N8000. The Roms are optimized for the extra screen size so that explains it.
Click to expand...
Click to collapse
You didn't ubderstand me.
Of will work for you because you are moving it to your external sd card (32GB). But I don't want that. I want to move it to the internal sd card (2GB), so I can have a lot of apps even of I don't have any external card installed.
This version can't do that. If I do not put am external card, the move to USB storage is greyed-out in the app settings. It means it cannot detect the internal card as an installable partition.
Anyways, I was able to fix it after finding out that there is a different display driver from a uboot.img of a different firmware, that I need to flash.
Jul 5 version is still the best l, in my opinion.
Sent from my YP-G70 using xda premium
Me too, I also faced this problem after flashed star n8000, I flashed 2 firmwares of Feb 16 and Jul 5. My phone display is black and pink, still can see the UI and touch's work. Anyone know this, pls help. I really appreciate, thanks in advance.
Yes I do knoe how to fix screen displays and funky colors if you still need help just let me know
Sent from my N8000 using xda app-developers app
Request for help
tysydenham said:
Yes I do knoe how to fix screen displays and funky colors if you still need help just let me know
Sent from my N8000 using xda app-developers app
Click to expand...
Click to collapse
Hello
my name is Sarah from Israel
I've been really desperate
I bought a new device on eBay
I tried to flash the device an older version of Android because the new one does not have Hebrew
Now I know I have to choose just the Android and not all the components but that's after the fact
Now the device turns on with a blank white screen
The device turns on and I hear the keyboard but the screen is blank and white
I read on the forum that I should use SP_MDT software fot flashing tool but I can not figure out how to use it??
The SP Flash Tool v3 tool is very simple and I got along with him ... But the second tool really not sure what to do.
I beg you, help me please to solve this.
EBay seller does not know anything and said this device is not supported
he sent me this file e1808_v75_jbl2-ota-user.root but it cannot be used by the SP Flash Tool v3 (scatter file cannot be chosen)
It seems to me that this file should install in different way (maby i ned to conect the phone as mass storge and put this file in the root near the download/music/video folders and after to boot with some Buttons trikes??)
thanks for help!
Hi all,
Background:
I bought an android phone from Chinavasion. It is described as
Wholesale Waterproof Android Phone - Mini Android Phone From China
I cannot identify its device type which is why I am posting here. The play store identifies the phone as
Alps Ratech72_wet_rlk_lca
The phone has a MT6572 Dual Core 1GHz CPU and runs Android version 4.2.2.
I want to increase the ram of the phone. It is 256MB. I want to use virtual memory. I have a 2GB sdcard in the phone. I am planning to give it 512MB. Can I do this without rooting? If I have to root it, then how do I do so? I would prefer not to use an exploit.
Anyone any suggestions?
Pranav
Hiya,
I went around looking for some hints on this phone as well but didn't come up with anything.
I got my device yesterday and I understand your issue. I have no sollution for you but I do have a solid work-around to get some more app space which, I'm afraid, involves rooting.
Activate USB debugging, connect your device to a PC. Download and run Kingo Android Root and follow the instructions.
After that I "adb'ed" to make the phone choose the SD-Card as the default installing path. Run th following command with adb.
Code:
# adb shell pm set-install-location 2
For the apps that wouldn't move to the SD-Card, due to su issues, I moved manually with the app called Move app to SD card.
Grant the app root access to sort out the apps not willing to move by themselves.
With this sorted I now have 500 mb of apps installed on the SD-Card. I am running low on memory now due to some parts of the app still installs on the phone memory.
Not a real app2sd script but it certanly will get you some more apps installed!
Another hint: When I ordered the phone they said it supported 16 GB SD-Cards only but I'm running flawless with a 64 GB card!
I'd love to see a costum recovery (since I don't know chinese) and CM for this device, but since it's not a western phone I guess we'll have to settle with stock.
Hope this helps.
A few hours has gone by and without doing any backups I replaced some system apps and now I can bearly work the phone! Haha.. Thou shall not do this sort of thing after 2 h sleep.
Anyway, don't be afraid of doing what I wrote in the previous post, it worked just fine! I'm hoping you'll do it, it's the only way I can think of to get the system files back. :-S
Since there seem to be no one but you and me who have bought there phones..
edit: Sorted out my problem, got it running again! However, if you are going to root it, please do share the stock files! :-S
PranavLal said:
Hi all,
Background:
I bought an android phone from Chinavasion. It is described as
Wholesale Waterproof Android Phone - Mini Android Phone From China
I cannot identify its device type which is why I am posting here. The play store identifies the phone as
Alps Ratech72_wet_rlk_lca
The phone has a MT6572 Dual Core 1GHz CPU and runs Android version 4.2.2.
I want to increase the ram of the phone. It is 256MB. I want to use virtual memory. I have a 2GB sdcard in the phone. I am planning to give it 512MB. Can I do this without rooting? If I have to root it, then how do I do so? I would prefer not to use an exploit.
Anyone any suggestions?
Pranav
Click to expand...
Click to collapse
to use virtual memory you would have to root it and plus you cant get that much more ram with virtual memory, 256mb of ram on a 4.2.2 phone? i hope you got a good deal for it because 256mb will get you nowhere with nowadays google play apps updates hogging all the ram.
Some more info. Appearently the phone is also called "Nanex" and/or Z18 Mini Smartphone.. Maybe it's called different things in different regions?
Move to SD card SUCCESSFUL!
Im so glad there was this thread, it seems like nobody else knows about this awesome little phone!
I followed the instructions that "pingaan" posted and it worked! now i can install as many apps to SD card as i want, awesome!
I'm glad I could help.
I've been using this device for about a week now and I have to say that the stock rom is horrible! There are many flaws and no updates incoming, as far as I know.
Another disappinting thing is that the screen material is >VERY< easily scratched so DO NOT order this phone without screen protection.
I am going to order a new one cause I love that it's so small! It's even smaller than my old "dumbphone", but I don't see myself using stock rom. I'd rather not use the phone at all.
I'm going to try to compile a custom recovery and port a suitable CM11 rom to this device for proper usage.
Don't expect it any time soon, cause my days are normally filled up with family, house and work.
Regards.
pingaan said:
I've been using this device for about a week now and I have to say that the stock rom is horrible! There are many flaws and no updates incoming, as far as I know.
Another disappinting thing is that the screen material is >VERY< easily scratched so DO NOT order this phone without screen protection.
I am going to order a new one cause I love that it's so small! It's even smaller than my old "dumbphone", but I don't see myself using stock rom. I'd rather not use the phone at all.
I'm going to try to compile a custom recovery and port a suitable CM11 rom to this device for proper usage.
Don't expect it any time soon, cause my days are normally filled up with family, house and work.
Regards.
Click to expand...
Click to collapse
everything about this phone is pretty good for the size, except the ram is so ridiculously small, i've tried to add virtual ram with link2sd and partitioned sd card, but apparently link2sd won't work without hacing the bootloader unlocked first, but i can't unlock the bootloader as it seems like there doesn't seem to be proper drivers for this phone.
if you are planning to do a custom rom on there, please let us know how when and how you managed to get the bootloader unlocked plz! :fingers-crossed:
Since I noticed the screen being easily scratched I ordered a new device from a different retailer, along with a plastic screen protection.
There is an interesting thing about this. The bootanimations are different and there's also a reboot option in the powermenu on the new.
Maybe the bootloader already is open? I mean, if you can change the power menu you need to alter the framework, right? The bootanimation is quite easy to change with root access however.
Have you checked the built-in recovery? There is actually an option for installing "update.zip"..
Do you have a proper app2sd script that I can try out on my old device?
Cheers...
Anyone have a backup of the ROM for ratech72_wet_rlk_lca ?? I plugged in a MTK Tool and I seem to have corrupted the system ;-( ... Didn't even get a chance to backup!
Help would be appreciated!
z18 ROM
regardtv said:
Anyone have a backup of the ROM for ratech72_wet_rlk_lca ?? I plugged in a MTK Tool and I seem to have corrupted the system ;-( ... Didn't even get a chance to backup!
Help would be appreciated!
Click to expand...
Click to collapse
Anyone find a copy of the ROM I need it also?
Hello everyone,
I have bought various Android TV boxes in the past, and haven't had problems getting them up and running.
I recently ordered 2 chinese models from eBay however, which are giving me nothing but grief. I apologize in advance for such a loooong post, but I am at my wits end and I am really hoping someone can help me out.
The action was for this model here:
www.ebay.com.au/itm/231275032090
It appeared to be a pretty standard model, like a Justop 4.0, but with a hard switch where the optical should be, and a cut down remote.
Firstly, the Specifications according to the auction:
1GB ddr3
4GB nand flash
Allwinner A20 dual core 1GHz CPU
On closer inspection after receiving the unit, an additional physical difference is that the reset button appears to be between the USB ports, instead of behind the AV out - not a big deal.
After powering it up, I am having huge problems with them.
Firstly though, what the software says about the hardware:
Advanced Settings/About Tablet:
Model Number : BBA22
Android Version : 4.2.2
Firmware Version : V2.0
Kernel Version : 3.4.39 [email protected] #10 Wed May 14 22:36:36 CST 2014
Build Number : BBA22-UI4-V2.0.1
And what Droid Info says about the (relevant)hardware:
Model : BBA22 (sdk-normal)
Manufacturer : unknown
Chipset : sun7i
RIL version : sw-dataonly-ril-0.5
Build Number : BBA22-UI4-V2.0.1
Build Bingerprint : softwinners/ninss/ninss4.2.2/NinssSoftware/20140521:eng/test-keys
OS Version : Jelly Bean MR1 (4.2.2)
SDK : 17
CPU Architecture : ARMv7 Processor rev 4 (v71)
Now, the BIGGEST issue these things have, is that at random points of use, it comes up with a message "Warning - System configuration is inconsistent with the production configuration, please contact your supplier, thank you!". This message will flash over and over again for anything from 30 seconds to half an hour. I half suspect it has tablet code SOMEwhere in it also, as it keeps coming up with 'touch the circle' walkthroughs for applications like avia. This might be unrelated though, I have no idea.
So anyway, I have tried doing the Justop 4.0 flash method with a SD card, however it will not turn on if there is a card in the slot. Also, when you hold the reset button down and power it up, it does not seem to go into the diagnostic mode so I can't flash it that way either. I am guessing the ONLY way I can update short of soldering in a serial port, is to use the backup/restore function.
I read through this whole thread here, but cound not fine anything to help me:
http://forum.xda-developers.com/showthread.php?t=2398632
If anyone has any ideas, please let me know, I seriously can't get anything to work. I thought maybe the 'hotspot' being enabled was causing the incinsistency problem, but I used a process killer to stop that at startup, still no luck. Doing a system reset through advanced config didn't help either, I got the error almost as soon as turning the unit back on.
I've attached pictures of the error I am getting, the top of the board, and the back if the board.
Cheers,
Smak
PS - I am yet to hear back from the seller, but if I ever do, I will post the result here...
Smakky said:
Advanced Settings/About Tablet:
Model Number : BBA22
Android Version : 4.2.2
Firmware Version : V2.0
Kernel Version : 3.4.39 [email protected] #10 Wed May 14 22:36:36 CST 2014
Build Number : BBA22-UI4-V2.0.1
Click to expand...
Click to collapse
I seem to be in a very similar situation. My device also reports as being "BBA22" but it's a different form factor and the identification on the board is "TXCZ_A20_v1.0". I tried contacting the people that made the board (Shenzhen Tianxing Chuangzhan Electronic Co.) but they refused to help. I also tried contacting the company that made the firmware images (Shenzhen NINSS Technology Ltd.) and they also refused. The supplier I bought the device from says they have the image file but they can't seem to figure out how to get it to me (they tried emailing the +200mb file then they gave up and stopped responding). The build number on my device is "BBA22-UI4-V2.0.4" so apparently there's an update available that may work on your device.
I'm pretty sure you need to flash the image using the Phoenixsuit program to make a special sdcard that you place in the device and boot from to reflash the device.
Please post your image file if you ever get it!
tisdall said:
I seem to be in a very similar situation. My device also reports as being "BBA22" but it's a different form factor and the identification on the board is "TXCZ_A20_v1.0". I tried contacting the people that made the board (Shenzhen Tianxing Chuangzhan Electronic Co.) but they refused to help. I also tried contacting the company that made the firmware images (Shenzhen NINSS Technology Ltd.) and they also refused. The supplier I bought the device from says they have the image file but they can't seem to figure out how to get it to me (they tried emailing the +200mb file then they gave up and stopped responding). The build number on my device is "BBA22-UI4-V2.0.4" so apparently there's an update available that may work on your device.
I'm pretty sure you need to flash the image using the Phoenixsuit program to make a special sdcard that you place in the device and boot from to reflash the device.
Please post your image file if you ever get it!
Click to expand...
Click to collapse
That is good to know, I might email them again now. Will let you know the outcome!
OK, so I got a reply from the seller.
I've attached the patch file and the instructions to this message, but theres a few things to note.
- Its only like 20 meg big, so it isnt a full firmware update
- The instructions talk about pressing the reset button at the start.., I don;t think this is neccesary if its rooted already
- The instructions are VERY engrish-y, basically just dump the update.zip onto a sd card, and apply the patch through the settings menu
- The default language is changed to some form of Chinese after applying, theres plenty pictorials on how to change the android language though.
- The version has been updated from BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3 - This is still lower than the one you mentioned @ BBA22-UI4-V2.0.4
So far though, I have re-installed all my apps, and haven't seen the error.. yet. I was a little concerned it is still giving me touchpad tutorials, but mouse mode on the remote is making short work of those.
I'll just have to wait and see, I guess.
Smakky said:
OK, so I got a reply from the seller.
I've attached the patch file and the instructions to this message, but theres a few things to note.
- Its only like 20 meg big, so it isnt a full firmware update
- The instructions talk about pressing the reset button at the start.., I don;t think this is neccesary if its rooted already
- The instructions are VERY engrish-y, basically just dump the update.zip onto a sd card, and apply the patch through the settings menu
- The default language is changed to some form of Chinese after applying, theres plenty pictorials on how to change the android language though.
- The version has been updated from BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3 - This is still lower than the one you mentioned @ BBA22-UI4-V2.0.4
So far though, I have re-installed all my apps, and haven't seen the error.. yet. I was a little concerned it is still giving me touchpad tutorials, but mouse mode on the remote is making short work of those.
I'll just have to wait and see, I guess.
Click to expand...
Click to collapse
That seems very promising for you! Unfortunately it probably won't help me at all... It sounds like it's a sort of update patch instead of a whole image. Starting the device with the reset button causes it to load the recovery partition instead of the regular partition (I'm guessing you saw a green android with a text menu with options for recovery). I full flashing would/could involve an SDcard, but I think you would have to create it with Phoenixsuit and not just copy the file contents over (it would then just boot directly from the SDcard and you wouldn't need to press the reset button).
In my case, both the regular boot partition and the recover partition are wrecked so I couldn't even try this patch if I wanted to.
Thanks for posting, though... Hopefully it helps someone else out.
tisdall said:
That seems very promising for you! Unfortunately it probably won't help me at all... It sounds like it's a sort of update patch instead of a whole image. Starting the device with the reset button causes it to load the recovery partition instead of the regular partition (I'm guessing you saw a green android with a text menu with options for recovery). I full flashing would/could involve an SDcard, but I think you would have to create it with Phoenixsuit and not just copy the file contents over (it would then just boot directly from the SDcard and you wouldn't need to press the reset button).
In my case, both the regular boot partition and the recover partition are wrecked so I couldn't even try this patch if I wanted to.
Thanks for posting, though... Hopefully it helps someone else out.
Click to expand...
Click to collapse
Hmm, is clockworkmod still a thing? I could try taking a backup of my ROM and see if that's something you can use.., only problem is I will need a bit of time. If I get a chance, I'll do it over the weekend. I will need a place to dump the image though, it will be too big to attach here, can sort that out later though.
Smakky said:
Hmm, is clockworkmod still a thing? I could try taking a backup of my ROM and see if that's something you can use.., only problem is I will need a bit of time. If I get a chance, I'll do it over the weekend. I will need a place to dump the image though, it will be too big to attach here, can sort that out later though.
Click to expand...
Click to collapse
I'd appreciate that... Your board seems to have a completely different layout, but all the same components. I'm not familiar with clockworkmod, though, so I'm not sure how that backup would work. I guess I'd need to get clockworkmod flashed on to the recovery partition first and then I could flash the backup to the NAND from there?
tisdall said:
I'd appreciate that... Your board seems to have a completely different layout, but all the same components. I'm not familiar with clockworkmod, though, so I'm not sure how that backup would work. I guess I'd need to get clockworkmod flashed on to the recovery partition first and then I could flash the backup to the NAND from there?
Click to expand...
Click to collapse
I'm not actually too sure. The last timed I used clockworkmod was for flashing a galaxy s2 phone, so I'm not even too sure if its still around or compatible with tv boxes. There will definately be SOME sort of tool though, that can take a full backup suitable for restoring. I'm about at the limit of my knowledge, so I am sort of playing by ear and going into a google-learn-try sort of cycle as I try different things. Maybe someone with more experience will stumble in here and let us know what we need to do
This is interesting... I found another device with an identical PCB board: YBKJ_A20 (I can't post links yet, but a Google search will find it) Several chips are different so the firmware would differ. It's so hard to work with these devices when no one claims credit for making a lot of these things!
What is J4?
http://dl-1.va.us.xda-developers.com/2/9/3/6/8/3/3/DSC_0207s.jpg
I was wondering what the upper left 2 pin connector is for? (the little white 2 pin plug next to the USB)
Is it SPDIF? Power input? output? Something else? I see in this picture a cable connected so i'm hoping you can tell.
Ask BBA22-V.1.50 TV BOX Model Android 4.2 Firmware
Smakky said:
OK, so I got a reply from the seller.
I've attached the patch file and the instructions to this message, but theres a few things to note.
- Its only like 20 meg big, so it isnt a full firmware update
- The instructions talk about pressing the reset button at the start.., I don;t think this is neccesary if its rooted already
- The instructions are VERY engrish-y, basically just dump the update.zip onto a sd card, and apply the patch through the settings menu
- The default language is changed to some form of Chinese after applying, theres plenty pictorials on how to change the android language though.
- The version has been updated from BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3 - This is still lower than the one you mentioned @ BBA22-UI4-V2.0.4
So far though, I have re-installed all my apps, and haven't seen the error.. yet. I was a little concerned it is still giving me touchpad tutorials, but mouse mode on the remote is making short work of those.
I'll just have to wait and see, I guess.
Click to expand...
Click to collapse
Hello
Thank You For This Firmware But It Work For BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3.
My Device Model is ((BBA22-V.1.50)) with Android 4.2 and I had to update it with your firmware file to fix problem black page after boot.
after update my device with your firmware, black page broblem is solved but device not work properly and it show Error message for (android.process.acore) systematically in loop!
also I can not make very actions because this error message show repeatedly.
also the default device language is china and i can not change language (error message show repeatedly)
have you original firmware for ((BBA22-V.1.50)) with Android 4.2 device???
thank you for help me...
H.SHAFAGHI said:
have you original firmware for ((BBA22-V.1.50)) with Android 4.2 device???
Click to expand...
Click to collapse
So... For everyone looking for a full firmware for this box, and stumbled upon this thread from google like I did: DESPAIR NO MORE.
I found a compatible firmware for this device (exacly as described and same board as the one OP has) It will work even if your box came preinstalled with another software version, but its the same hardware
Found it in another thread, posted by @daaviles30 Its not EXACLY the same as the one I had originally loaded but appears to work without any issue whatsoever (even the remote works), if a little bit better.
So here it is:
daaviles30 said:
A20_V20_SDK_EN_XBMC_0703-2.img*491.4 MB
*https:/ /mega.co.nz/#!XAIRiD5Q!aIb0tvvjvzUdaf11vIR7PAadeXPV8XizYJ9X2mAzpQI
RH46-update-a20.zip*582 KB
*https:/ /mega.co.nz/#!HZwTgQIT!LQGxb6R-lCIKe58RgIGROfufY-aq5PODSAq3-NPKOeo
PhoenixCard_V309
*http:/ /mega.co.nz/#F!HAIhBJyS!L_UQPNnYdPyHTD3ggnJ6OA
After flashing update and then go to the play store and download SuperSU update that and your ready to go.
---------- Post added at 03:57 PM ---------- Previous post was at 03:29 PM ----------
Titanium Backup Pro v6.1.5.3.apk*6.2 MB
*https:/ /mega.co.nz/#!vAAWRJga!vOFKlAq_25ssrG5kvwa3-oC-d0saL06YGBIWIyN2jss
You can delete all the unwanted system apps with this app.
Hope this helps Happy New Years.
Click to expand...
Click to collapse
The flashing process is exacly as described earlier in this thread. Use phoenix card to burn the img to an SD card, turn the device on with the card inserted in the slot and enjoy your restored android box.
It Working Only With Booting From Memory Card Slot...
amedeh123 said:
So... For everyone looking for a full firmware for this box, and stumbled upon this thread from google like I did: DESPAIR NO MORE.
I found a compatible firmware for this device (exacly as described and same board as the one OP has) It will work even if your box came preinstalled with another software version, but its the same hardware
Found it in another thread, posted by @daaviles30 Its not EXACLY the same as the one I had originally loaded but appears to work without any issue whatsoever (even the remote works), if a little bit better.
So here it is:
The flashing process is exacly as described earlier in this thread. Use phoenix card to burn the img to an SD card, turn the device on with the card inserted in the slot and enjoy your restored android box.
Click to expand...
Click to collapse
Hello My Friend And Thank You For Replay...
This Android is Working And is Very Good But i Can Not Install This To My Device. I Copy The IMG File To A External Memory Card (Using PhonixCard Application) and put the Memory Card To My Device And PowerOn My Device. My Device Automatically Boot From Memory Card And New Android is Appear. It Is Very Fast And Have No Errors.
Now...
HOW I CAN INSTALL THE IMG FILE TO MY DEVICE (INTERNAL MEMORY) AND BOOT MY DEVICE WITHOUT USING MEMORY CARD (FOR ALL TIMES)???
H.SHAFAGHI said:
Hello My Friend And Thank You For Replay...
This Android is Working And is Very Good But i Can Not Install This To My Device. I Copy The IMG File To A External Memory Card (Using PhonixCard Application) and put the Memory Card To My Device And PowerOn My Device. My Device Automatically Boot From Memory Card And New Android is Appear. It Is Very Fast And Have No Errors.
Now...
HOW I CAN INSTALL THE IMG FILE TO MY DEVICE (INTERNAL MEMORY) AND BOOT MY DEVICE WITHOUT USING MEMORY CARD (FOR ALL TIMES)???
Click to expand...
Click to collapse
Wow.
The Phoenixsuite makes an sdcard that flashes the internal memory. After it's finished flashing, you take the card out and it runs off of the internal NAND. That's it. It never runs the Android from the sdcard.
My device can boot from sd-card!!! I need to flash this to install your android!
tisdall said:
Wow.
The Phoenixsuite makes an sdcard that flashes the internal memory. After it's finished flashing, you take the card out and it runs off of the internal NAND. That's it. It never runs the Android from the sdcard.
Click to expand...
Click to collapse
Hello My Friend And Thank You For Replay...
1- My Device Can Boot From SD-CARD With A Bootable Memory Card! (Such As OpenSuse Linux)
2- I Use PhonixCard Application That You Send.
(PhoenixCard_V309
*http:/ /mega.co.nz/#F!HAIhBJyS!L_UQPNnYdPyHTD3ggnJ6OA
3- I Can Not Use PhonixSuit Application And I Don't Know How To Use PhonixSuit. When I Connect My Device To My Computer To Use PhonixSuit, My Computer Don't Find Any Hardware And Can Not Connect!
4- I Copy The IMG File To A SD-CARD (Using PhonixCard Application) and put the Memory Card To My Device And PowerOn My Device. My Device Automatically Boot From Memory Card And New Android is Appear. If Unplug The SD-CARD And Power On My Device, Old Android Is Appear!!! Master Android Software Is In My Device And I Need To Clear This From My Device And Install Your Android!
HOW I CAN INSTALL YOUR ANDROID TO MY DEVICE (INTERNAL MEMORY) AND BOOT MY DEVICE WITHOUT USING MEMORY CARD???
I need help!!!!
no any answer???