Related
Since there isn't much information (in English) about how to upgrade the Zopo ZP100 phone to ICS I've now done it myself (after reading a lot of Russian forums using Google Translate I finally took the plunge into the deep end of the pool and just did it).
Files needed
ICS ROM (b79):
http://narod.ru/disk/48456521001.ee...T75_h932_b79_pulid_sw 20120428-14151.rar.html
Root:
http://files.dangerd.org/pub/ZP100//zopo zp100 4.0ROOT by008.rar
Flashtool:
http://narod.ru/disk/44888871001.ee...6c3e795/SP_Flash_Tool_exe_v3.1206.01.zip.html
USB Drivers (and a flashtool I didn't use):
http://chinamobiles.org/downloads/zap/ZP100fix.zip
CWM Recovery:
http://files.dangerd.org/pub/ZP100//recovery.img
First of all: Make a note of your IMEI-number(s)
Download the files and unpack all (in seperate folders).
Shutdown the phone and plug it in via USB, Windows will search for a driver which you find in the package ZP100fix.zip (different inf-files depending on windows version).
Unplug phone, remove the battery.
Replace the recovery.img from the ICS ROM with the one downloaded seperately.
Start flashutil.
Load Scatter-file: MT6575_Android_scatter_emmc2.txt
Make sure that Options -> USB Mode is selected.
Click Download
Connect phone (still with no battery, at least I had to leave it out).
Flashing begins.
When all is done it displays an "OK window".
Now reboot the phone and when booted connect to USB again and run Root.bat from the package: zopo zp100 4.0root by008"
Follow on-screen instructions.
I did not need to install any separate Google Apps, it was included in the ROM.
Now you need to add some IMEI-numbers to your phone.
In the original ROM I could only ever see one IMEI for my zp100, so I wrote that down.
IMEI2 I took from an old Nokia I hadn't used for a few years.
Use terminal app or adb shell or whatever to execute the following (replace IMEI_1 and IMEI_2 with your IMEI's):
echo 'AT + EGMR = 1,7, "IMEI_1"'> /dev/pttycmd1
echo 'AT + EGMR = 1,10, "IMEI_2"'> /dev/pttycmd1
Update: Zopo IMEI Tool in English can be downloaded from here: http://depositfiles.com/files/wi41lcuvb (should eliminate the need for the terminal-hack above). If the system language on your phone isn't set to English the utility will be displayed in Chinese by default, so setup your phone to use English before running it.
If you want your external sdcard mounted as /sdcard (/mnt/sdcard) instead of /mnt/sdcard2 you have to replace the /etc/vold.fstab with the following:
http://www.cactuz.net/files/zp100/vold.fstab
Use root-explorer (make a backup of the old one) to replace it, then shutdown your phone and remove the battery, then plug it all back in and start again and your external sdcard shoudl be mounted on /sdcard (/mnt/sdcard) instead.
Hope this helps.
I'll report back here with any bugs etc.
To use RecoveryMod I have to chose it from the menu in MobileUncle Tools or ClockWorkMod Rom Manager, I have not been able to boot to CWM using VolUp+Power.
Some of my favorite apps can't be downloaded from Google Play Market:
Vignette
Endomondo Pro
Snowstorm Weather Widget
GPS Status
I have been able to restore them all using MyBackup Pro and they are running fine, they just aren't compatible according to Play Market.
So any app you really need is good to make a backup of using MyBackup (or Titanium or any other backup app of your choice) so you can restore it if it can't be installed using market after the ICS upgrade.
Note that all these apps can be installed fine on my other devices using ICS (HTC Desire with CM9 and Samsung Galaxy Tab P1000 with CM9 or AOKP) so it's this ROM that is the issue AFAIK.
Thank you ... I'll follow up in a couple weeks
Ordered my zopo yesterday (for the second time -- waited 2 weeks from the first store (merimobiles) and then cancelled when they still hadn't shipped it. Hopefully I'll have better luck this time.)
I appreciate you posting this info and will try it out when I get the phone.
Good luck Dave,
I ordered mine from etotalk.com, got it in about a week with DHL used for shipping.
I've updated the first post with some more info in regards to RecoveryMod and mounting external SDcard as /mnt/sdcard (/sdcard).
Since I use this phone daily I will probably not experiment much with it until any new official release is available. But the current one (b79) is good enough.
There are quite a lot of crappy chinese apps (crappy since I don't know what they do and they aren't translated into a language I can understand) installed with this ROM bit they can all be removed using the normal App-menu in the system settings.
imei no.
hello, u said that u have write the imei no. of old nokia phone which u don't use. i want to know that can i also change both the imei no. as i m from india and in india only valid imei no. works, and i m planning to purchase this phone but i am afraid that if the imei no. are not according to india then it will not work so i just wanted to know that if i write my old dual sim phone imei to zopo zp100, will it work without any problem.
rohit: I can't say for sure if the phone actually reports two IMEI's to the service provider, but at least it displays two IMEI's when I check "About phone" in the sytem settings.
Sorry I can't say if it works or not in India.
hello
hyy , i have ihtc one x aka b79 , followed your procedure it works gr8. but i am facing a problem with usb mass storage and am not able to lock into gps any possibilities to fix this error? and does anyone has an access to orignal android 2.3.4 rom for b79 , to restore to previous bug free state?
DaveKnowsAll said:
Ordered my zopo yesterday (for the second time -- waited 2 weeks from the first store (merimobiles) and then cancelled when they still hadn't shipped it. Hopefully I'll have better luck this time.)
I appreciate you posting this info and will try it out when I get the phone.
Click to expand...
Click to collapse
hiii from which website did u ordered this phone i am also planning to ordere thinking to order from ttmalls.com is it trustable
official android 4.0 is announced.
Newby with ZP100
I have bought a ZP100 with Pandawill.
Received yesterday. Wait around 10 days from China to France
It seems to be ok but there is no Android Market application (or Android Play store)
So i cannot download my applications that i bought with older phone and my phone is not interesting without applications
There is a chinese application looks like a chinese android market but ... i am french and chinese is only beautiful drawings for me.
I difficultly download some but cannot find others
If i change ICS (what is ICS ? System ?) will i resolve my problem ?
I download 2 files (http://www.zopomobile.com/xiazai.php) this morning but i don't know how to install it and afraid there is only chinese language
MP_MT75_h932_h5500_zwx_20120419-203646_ZYQ_PC.rar
ZP100_20120510new4.0.rar (think is the last android version)
I flashed ROM very often on Windows mobile samsung phones i900 and GTi8000 but i don't know Android (just install Android as 2nd system on GTi8000 Samsung). Hope someone can explain me what to do to improve the basic system
Other problem : sometimes i have no network on the 2 SIMs, all stop. I must stop and reboot the phone. Has somebody the same problem ?
Last : how to switch to recovery mode ?
Thanks
@cuctaz
Can you execute nandroid backup/restore in the recovery mode?
E:Can't mount /cache/recovery
ZP100 and ICS upgrade experiences
Hi Guys,
I bought the ZP100 1,5 weeks ago from etotalk.com.
After 1 week i tried to upgrade to ICS about this and Colonel ZAP's description.
My experiences with the ICS upgrade:
When i received the phone, on that was etotalk v1.0 firmware.
It is a very good customized rooted ROM, works fast and it has just some minor bugs.
The only problem was, it could only read the internal storage, when i insert an external SD card. It was strange, but i accept it programming defects.
I downloaded the official 2.3.6 and this B79 ICS, VCOM (Flash) drivers and the flash program.
At first, i downloaded the ClockWorkMod Recovery for chinese phones.
Unfortunately it is make a factory reset on the phone, but after you customize it, you can make full backup about your ROM.
IMPORTANT! Copy the backup to your computer, because the ICS ROM formatted my external SD
This is very recommended, because...
At first i installed the linked B79 ICS ROM.
The default language is chinese, but it contains english, so if you know the android, it is not a challenge to change it. It couldn't read the internal memory neither, just after format it.
It wasn't rooted, and deleted IMEI. When i tried to root (different way as 2.3.6, need USB debug mode and ADB) the Windows doesn't recognize the ADB driver. The driver wasn't in Android SDK, and i can't download it (i haven't tried it on Linux yet). For a moment Windows showed it found HTC Dream device. I downloaded HTC drivers, but it didn't work with it neither.
Without this you can't restore the IMEI.
Ok, go back to the official 2.3.6.
I flashed it back. Almost the same effects. Default chinese language, the internal memory cannot readable. I could root it and install CWM recovery back.
Basically it doesn't contains Play store, but you can install it.
The ROM full of chinese programmes and my experience was it is very unstable.
I uninstalled the chinese programmes, and installed Play store. When i wanted make a call, the phone restarts. The Google Play Store froze every time.
Finally i restore back the etotalk ROM, and i use it.
Maybe if i have time/mood i will install the official ICS, but about my experiences i have doubts with it.
p.s.: in about 30C outside temperature i used the phone (installing programmes). After 10 minutes using it sings that the battery is too hot, remove it from the phone.
Is any other better quality battery what is compatible with this phone? thanks
---------- Post added at 10:34 AM ---------- Previous post was at 10:19 AM ----------
Hi jbctiong,
I used CWM recovery 5.5.0.4.
Just carefully, because it make a full factory reset.
And you need to insert an external SD card
carabaothai said:
I have bought a ZP100 with Pandawill.
Received yesterday. Wait around 10 days from China to France
It seems to be ok but there is no Android Market application (or Android Play store)
So i cannot download my applications that i bought with older phone and my phone is not interesting without applications
There is a chinese application looks like a chinese android market but ... i am french and chinese is only beautiful drawings for me.
I difficultly download some but cannot find others
If i change ICS (what is ICS ? System ?) will i resolve my problem ?
I download 2 files (http://www.zopomobile.com/xiazai.php) this morning but i don't know how to install it and afraid there is only chinese language
MP_MT75_h932_h5500_zwx_20120419-203646_ZYQ_PC.rar
ZP100_20120510new4.0.rar (think is the last android version)
I flashed ROM very often on Windows mobile samsung phones i900 and GTi8000 but i don't know Android (just install Android as 2nd system on GTi8000 Samsung). Hope someone can explain me what to do to improve the basic system
Other problem : sometimes i have no network on the 2 SIMs, all stop. I must stop and reboot the phone. Has somebody the same problem ?
Last : how to switch to recovery mode ?
Thanks
Click to expand...
Click to collapse
go to this link you will be able to fix android market
http://colonelzap.blogspot.in/2012/04/zopo-zp100-rooting-and-market-fix.html
@rohit_shah000
Thanks for the link i will check
@vzzoli
Thanks for your experiences
What is the ClockWorkMod Recovery for chinese phones.
WHy you needed it ?
Now we can download the 4.0 official
Somebody try it ?
hello carabaothai,
I used it for backup/restore my ROM.
But you can use nandroid backup too.
Sorry for my abscence from this thread, I've been busy all weekend actually tuning a car instead of my phone
buntybauva: I've got no problems with USB Mass Storage, could you explain what problems you experience?
I made a nandroid backup of the old ROM, but I haven't used it so don't actually know if it works.
rohit: I ordered mine from etotalk.com
carabaothai:I forgot to mention that the ICS-rom I linked to (and flashed myself) is in Chinese as default, but can be changed to English using the System Settings, luckily there are icons in there so you can find the symbol for language (hint for anyone who doesn't know: It's an "A").
ICS = Ice Cream Sandwich (Android 4.0)
I have not experienced problems with loosing network on the SIM cards.
jbctiong: I had not tried any nandroid backup/recovery yet, tested right now and it doesn't seem to be able to actually do any backup. Some mount errors for sdcard.
vzzoli: Thank you for sharing your experiences.
I agree that the etotalk-ROM is quite good, but I always want the latest stuff on my gadgets
I have not had any issues with reading my sdcard nor in etotalk-rom or in the later ICS-rom.
The ICS rom did not format my external SD. But one should always make a backup of course (I backup my SDcard before every flash I try).
One bug I found in the current ROM is that the Cam/Videocam-switch on the phone doesn't make any difference what position it's in.
I'm going to see what the russian forum says about the official release, I'm quite happy with the one I'm currently running so no real need to change, but there could be performance reasons to change or maybe something else.
I downloaded to the "official" ROM and updated my phone
I think this is the same ROM as B79, just renamed the version.
Remove the IMEI, not rooted, other MTP driver needed etc.
@cactuz:
What operating system did you use for root the phone?
I'm using Windows, and the new official ICS ROM wants different ADB drivers than the 2.3.6.
Without this, i can't root it, and restore IMEI.
Buntybauva's mass storage problem maybe that the Windows recognize the ICS phone as media device, but can't mount as usb mass storage without a third party program
vzzoli: I used Win7 32bit when I rooted the phone, used the scripts supplied in one of the links in my initial post.
When I restored the IMEI I used Linux since that is my prefered choice whenever using ADB.
I can't check right now what version because I've apparently forgot my VPN-password so I can't connect to my computer at work
Does the camera-switch work for changing between Camera and VideoCam on the new official rom?
hyy
after ics upgrade is anyone facing problem with gps lock?
buntybauva: Not worse than before, the GPS was terrible for me before as well as after (but I do get a fix after quite some time). Though some of the guys on the russian forum has modified the antenna as far as I know.
Maybe DangerD could help us out because I think he has been involved in it.
hi guys, can somebody help me to solve my problem when I flash my websong n8000 (same like star n8000).
what I've done doesn't meet any success.
I've try to flashing whole rom that can be found in http://forum.xda-developers.com/showthread.php?t=1695210&page=1
and i also have change the display setting using SPMDT but it didn't work
my screen still black but it is booting and the touch screen is also working.
Help me guys.
hi mate, i had the same problem with you..do you have the answer for this problem ?
Display Contrller problem for N8000
Me Too. I got this phone with a July 27 version.
I did not want it since the internal 2GB cannot be used with App2SD.
Flashed with July 5 firmware using SPMDT and was able to succesfuly downgrade.
But now screen is totally wrong colors. Mostly black, but still able to see the UI, just that no colors. Just black and pink.
I hope somebody helps us in this thread since we cannot post in the official N8000 thread if we are a new user.
jpalpano said:
Me Too. I got this phone with a July 27 version.
I did not want it since the internal 2GB cannot be used with App2SD.
Flashed with July 5 firmware using SPMDT and was able to succesfuly downgrade.
But now screen is totally wrong colors. Mostly black, but still able to see the UI, just that no colors. Just black and pink.
I hope somebody helps us in this thread since we cannot post in the official N8000 thread if we are a new user.
Click to expand...
Click to collapse
Hi, I have this Star N8000 and been doing help videos on youtube over the last 2 weeks. I was able to put apps on the 2GB by going to Settings->App->and I select (Move to USB Storage). I have a 32 GB micro sd card. with my media installed. I moved as many apps off the 512 that I don't need as it will slow the phone down. As for you guys issues, I would recommend not flashing any rom on the device. There is just not enough info to properly identify it. You can either go by led flash position. The Haipai version is the same internal and for some reason its more easy to identify but its running the same MTK 6575 Single Core 1 ghz processor as the Star N8000. The Roms are optimized for the extra screen size so that explains it.
Iph0ne27 said:
Hi, I have this Star N8000 and been doing help videos on youtube over the last 2 weeks. I was able to put apps on the 2GB by going to Settings->App->and I select (Move to USB Storage). I have a 32 GB micro sd card. with my media installed. I moved as many apps off the 512 that I don't need as it will slow the phone down. As for you guys issues, I would recommend not flashing any rom on the device. There is just not enough info to properly identify it. You can either go by led flash position. The Haipai version is the same internal and for some reason its more easy to identify but its running the same MTK 6575 Single Core 1 ghz processor as the Star N8000. The Roms are optimized for the extra screen size so that explains it.
Click to expand...
Click to collapse
You didn't ubderstand me.
Of will work for you because you are moving it to your external sd card (32GB). But I don't want that. I want to move it to the internal sd card (2GB), so I can have a lot of apps even of I don't have any external card installed.
This version can't do that. If I do not put am external card, the move to USB storage is greyed-out in the app settings. It means it cannot detect the internal card as an installable partition.
Anyways, I was able to fix it after finding out that there is a different display driver from a uboot.img of a different firmware, that I need to flash.
Jul 5 version is still the best l, in my opinion.
Sent from my YP-G70 using xda premium
Me too, I also faced this problem after flashed star n8000, I flashed 2 firmwares of Feb 16 and Jul 5. My phone display is black and pink, still can see the UI and touch's work. Anyone know this, pls help. I really appreciate, thanks in advance.
Yes I do knoe how to fix screen displays and funky colors if you still need help just let me know
Sent from my N8000 using xda app-developers app
Request for help
tysydenham said:
Yes I do knoe how to fix screen displays and funky colors if you still need help just let me know
Sent from my N8000 using xda app-developers app
Click to expand...
Click to collapse
Hello
my name is Sarah from Israel
I've been really desperate
I bought a new device on eBay
I tried to flash the device an older version of Android because the new one does not have Hebrew
Now I know I have to choose just the Android and not all the components but that's after the fact
Now the device turns on with a blank white screen
The device turns on and I hear the keyboard but the screen is blank and white
I read on the forum that I should use SP_MDT software fot flashing tool but I can not figure out how to use it??
The SP Flash Tool v3 tool is very simple and I got along with him ... But the second tool really not sure what to do.
I beg you, help me please to solve this.
EBay seller does not know anything and said this device is not supported
he sent me this file e1808_v75_jbl2-ota-user.root but it cannot be used by the SP Flash Tool v3 (scatter file cannot be chosen)
It seems to me that this file should install in different way (maby i ned to conect the phone as mass storge and put this file in the root near the download/music/video folders and after to boot with some Buttons trikes??)
thanks for help!
Hi i need urgent assistance...i do a little retail and like my products to be efficient in everything...got a good looking qualcomm msm7227 800mhz 512mb 4gb tablet....now consequently the internal memory allocated for app datat storage is low(150mb).....i need help with:
---rooting (need to do some moddding so i can load apps on sd or something)
---stock rom or custom rom (to flash a newer os unto it and root too)
---general tutorial on how to mod,flash ,root info on all those cwm stuff....
Thanks
droidmarshall said:
Hi i need urgent assistance...i do a little retail and like my products to be efficient in everything...got a good looking qualcomm msm7227 800mhz 512mb 4gb tablet....now consequently the internal memory allocated for app datat storage is low(150mb).....i need help with:
---rooting (need to do some moddding so i can load apps on sd or something)
---stock rom or custom rom (to flash a newer os unto it and root too)
---general tutorial on how to mod,flash ,root info on all those cwm stuff....
Thanks
Click to expand...
Click to collapse
brand? model? you cant just say you have a tablet and tell the processor... thats like saying my car has 4 tires when i go to buy some new ones.
jeffsrawr said:
brand? model? you cant just say you have a tablet and tell the processor... thats like saying my car has 4 tires when i go to buy some new ones.
Click to expand...
Click to collapse
its brand is voosoo and the model is v7...(VOOSOO V7) i really need help with it...is there any better way to reach an expert on this?
Hello good people, I will join Jour company, because I have the same problem with a very similar chinese product VooSoo V75 based on MStar CPU MSW8868. Did not manage to find anything valuable, or did not manage to extract any value from my findings in Google.
PC with vista can see ADB composite device, PDA Net also detects the device, but ADB shell can not see the device. here is the place I have stuck. the cause of all problems is my attempt to modify build.prop file and force the tablet to introduce as Samsung. Seems I touched something more then needed. I have a backup file of build.prop.
Please give some advice to moove from dead point.
Many thanks and Happy New Year.
evkapoc said:
Hello good people, I will join Jour company, because I have the same problem with a very similar chinese product VooSoo V75 based on MStar CPU MSW8868. Did not manage to find anything valuable, or did not manage to extract any value from my findings in Google.
PC with vista can see ADB composite device, PDA Net also detects the device, but ADB shell can not see the device. here is the place I have stuck. the cause of all problems is my attempt to modify build.prop file and force the tablet to introduce as Samsung. Seems I touched something more then needed. I have a backup file of build.prop.
Please give some advice to moove from dead point.
Many thanks and Happy New Year.
Click to expand...
Click to collapse
Totally forgot it was running 4.03 version Android. When attempting to boot while pressing volume down and power buttons it shows droid on it's back with a red triangle in it's belly. No reaction to any key pressed.
Thanks again.
evkapoc said:
Totally forgot it was running 4.03 version Android. When attempting to boot while pressing volume down and power buttons it shows droid on it's back with a red triangle in it's belly. No reaction to any key pressed.
Thanks again.
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showthread.php?t=2066041 it might support your tablet. Let me know if it does.
droidmarshall said:
Hi i need urgent assistance...i do a little retail and like my products to be efficient in everything...got a good looking qualcomm msm7227 800mhz 512mb 4gb tablet....now consequently the internal memory allocated for app datat storage is low(150mb).....i need help with:
---rooting (need to do some moddding so i can load apps on sd or something)
---stock rom or custom rom (to flash a newer os unto it and root too)
---general tutorial on how to mod,flash ,root info on all those cwm stuff....
Thanks
Click to expand...
Click to collapse
What prep have you done? Anything else you got installed? Depending on the developer who makes the ROM/Kernal usually they add a 'How To' guide so thats all the info you need on how to flash unless your wanting somebody to email/IM you with help. Also the tablet will have limits, there are a few apps in the Play Store that can help in regards to transferring apps to SD (app name AppstoSD).
I'm willing to help you as it's always fun to start a new project
DISCLAIMER:
Rooting your phone and using custom Recoveries and ROMS have risks and may result in bricking your device, and has nothing to do with Google or the device manufacturers. In case of any mishap I am not responsible if you brick/ruin your phone in any way.
Basic computer skills are required and minimal knowledges about phones and phones utilities too.
Make sure that whatever you do, you are doing it at your own responsibility.
I built from source a CWM Recovery, version 6.0.4.4 adapted by me to build in cm-10.1 environment, for ZTE V967S phone. I have to say Thank you to C3C076 for his help. He was kind to help me to figure out how to tweak building source for recovery, to obtain a compatible recovery. So, you should thank him, or even better to donate to him if you can. Now I improved the MTK compatibility, I fixed restore old recovery issue.
The CWM 6.0.4.4 recovery can be downloaded from downloads section. If you care enough, and you like what I did, after download just hit the Thanks button. If you use it or port it and ask other to hit Thanks for you, do the same here to show respect for my work.It is fully functional: it works for flash zip, to wipe, mount (both internal and external sdcard), backup, restore, format to factory from phone settings menu, apply updates from stock ROM, etc.If you share my compiled recovery on other sites or forums, please give proper credits for it!
CREDITS and THANKS
C3C076 for his help on tweaking recovery source.
bgcngm for his wonderful tool for unpacking and repacking img.
rua1 for MTK Droid Root & Tools.
dsixda for his Android Kitchen.
Cyanogenmod Team for their wonderful project.
Koushik for creating Clockworkmod Recovery and for constant improvement of it.
-- You really should thank to all of these guys or if you can to donate to them, because without their hard and fine work, we couldn't enjoy our phones as we should.
If you choose to use these, you are doing that on your own risk, and I can not be held responsible for any damage you made to your phone.
1. SPFlashTool backup ROM
A SPFlashTool prepared backup from last stock version 1.0.0 - 27.08.2013 for NonChina Market, if you need to unbrick your phone, or if you want to revert to stock. This version has English as default, and also include Chinese and Russian. It has root and custom CWM, otherwise is untouched. You have to flash this one with SPFlashTools. The scatter file is included.
3. A version prepared from last LewaOS v5 - only English - LewaMax v2.
Rooted, optimized, gapps included. The ROM will not change your recovery.
INSTALL INSTRUCTION:
Many people have problems with force closed processes because they don't flash a new ROM properly.
- In recovery, mount USB Mass storage and delete from sdcard these folders:
.android_secure
Android
LOSTDIR
- then back in recovery do a wipe all data/factory reset in CWM or Pre-Flash wipe in COT
- in CWM in advanced menu wipe Dalvik cache / in COT in storage management menu wipe Dalvik cache
- Now flash the ROM zip.
ATTENTION:
For extending data partition please refer to this source. It's better than my previous modd and I think it's safer. Thank you meteos.But, I recommend you to use top 2.5 Gb data partition size, and let remaining 237 Mb for sdcard failure situations.
Here you will find MTKDroidTools of rua1's.
carliv said:
1. A SPFlashTool prepared backup from last stock version 1.0.5, if you need to unbrick your phone, or if you want to revert to stock. It has only root, otherwise is untouched. I removed from that the preloader, since is a high risk to damage your phone using that. But if someone need it I will send him private. You have to flash this one with SPFlashTools. The scatter file is included.
2. An optimized ROM, prepared from 1.0.5 stock version, ZTE V967S ROM Max Flavour v-2. Slimed, odexed (about 60Mb apps on data usage), zipaligned, busybox, debloated, multilingual (sort of), and some other things. I replaced the Launcher with SOLOLauncher because is lighter (only 5-6 Mb instead of 20) and have more features. I've tested it and it works flawless. You should flash it with CWM Recovery.
3. Will come a version prepared from last LewaOS v5 for MIUI fans.
Click to expand...
Click to collapse
Good jobs :good::good:
carliv said:
- 2.5GB ZTE V967S P188F07 Max v2 full
Click to expand...
Click to collapse
Hi Carliv, thank you very much for your rom. I am trying it and I am quite happy with that. I am only experiencing some problem with GPS: in some cases I was not able to switch on or switch off the GPS. Another thing that looks a little bit strange is that in YGPS -> Information the "chip version" is "UNKNOWN". With the sock ROM I am sure that the information about the chip version was displayed (MTK_GPS_.....). Have you the same issue?
Ciao.
pierangelof said:
Hi Carliv, thank you very much for your rom. I am trying it and I am quite happy with that. I am only experiencing some problem with GPS: in some cases I was not able to switch on or switch off the GPS. Another thing that looks a little bit strange is that in YGPS -> Information the "chip version" is "UNKNOWN". With the sock ROM I am sure that the information about the chip version was displayed (MTK_GPS_.....). Have you the same issue?
Ciao.
Click to expand...
Click to collapse
No, I haven't any problem with GPS, and if you check GPS in YGPS with GPS switched ON it will show you chip version.
I don' understand where you can't swith on/off GPS: in quickpanel toggles, in settings locations... You don't say that. So, please, be more specific.
When I need GPS, I turn it ON, and it connects in about 3 sec. if I'm outside, or maybe 10 if I'm inside near a window.
Thanks for appreciations.
I'll try to help you if you give me more informations.
--------------------------later edit------------------
One other thing, I noticed that if you use scheduled power off/on, you have to manualy restart the phone after self turning on, because the WIFI and GPS doesn't work properly... I don't know why, and I think this is a bug in 1.0.5 version.
hello ,
thanks for your support in our phone ZTE V967S
i have bought the phone from minideal.net with 1.0.3 MULTILANGUAGE, rooted and google play store version and chinese CWM, but i want to install 1.0.5 version
and ENGLISH cwm. does your 1.0.5 version support full GREEK language?
how to install CWM Recovery 6.0.3.5??
you gave us the scatter file, the usb drivers for ZTE and the recover.img.
but HOW to use them? give us full details
As i can understand with SLIM version you do not have Google Play Store installed.
right?
i want to install SLIM version to have battery improvement but i am a little afraid if sth goes wrong (someone says that the GPS is not
working perfectly and maybe some important things are missing) what is your opinion for SLIM version in general? will i have a problem if i install SLIM
compared with FULL?
also i want the 5GB userdata partition.. how to manage that?
maybe i need first flash 2.5GB ZTE V967S P188F07 Max_v2
and then flash again Extend2_5GBUserData.zip
RIGHT?
can i do it directly ??
gvekiaris said:
hello ,
thanks for your support in our phone ZTE V967S
i have bought the phone from minideal.net with 1.0.3 MULTILANGUAGE, rooted and google play store version and chinese CWM, but i want to install 1.0.5 version
and ENGLISH cwm. does your 1.0.5 version support full GREEK language?
how to install CWM Recovery 6.0.3.5??
you gave us the scatter file, the usb drivers for ZTE and the recover.img.
but HOW to use them? give us full details
As i can understand with SLIM version you do not have Google Play Store installed.
right?
i want to install SLIM version to have battery improvement but i am a little afraid if sth goes wrong (someone says that the GPS is not
working perfectly and maybe some important things are missing) what is your opinion for SLIM version in general? will i have a problem if i install SLIM
compared with FULL?
also i want the 5GB userdata partition.. how to manage that?
maybe i need first flash 2.5GB ZTE V967S P188F07 Max_v2
and then flash again Extend2_5GBUserData.zip
RIGHT?
can i do it directly ??
Click to expand...
Click to collapse
You're welcome!
Now, let's see:
1. No ROM is full multilanguage, except the case that all apps have multilanguage support. Otherwise, my version is as much multilanguage as minideal version from what I've seen - I ported translations from a Lenovo P770 because is very much similar. You will have Greek just like in minideal version.
We can try togheter to make a better translation if other users want that; I can post here archives with xml files that have to be translated, you make translations, post here back and I could integrate them in a ROM. That way we can translate even SystemUI, which now isn't.
2. To install CWM the easy way is with SPFlashTools - all you need is the scatter and recovery.img. Of course, you have to install proper drivers before - you can find them in first post. How to use SPFlashTools I can't reproduce here because there are several guides on forum, here is one of them. Just one thing: if you find hard to enter the phone in bootloader, just remove the battery and connect the phone to computer without battery - it will enter in bootloader automate.
3. I don't have gapps in my phone SLIM ROM, but version posted to download has, because many of you use them - I don't. The GPS is working perfect for me, the only bug I found untill now, and don't think is related to my work, but to original release, is that if you use Scheduled power on & off, after phone starts from sleep you have to reboot manualy, otherwise Wifi and GPS won't work correctly. I hope they'll solve that in a next release like they did with camera flash. But, overall slim or full version shares the same drivers, modules and libraries, and only difference is in installed apps. The full version has stock launcher and weather, and live wallpapers, etc. The slim version don't have those things.
4. You can't use a 5GB userdata partition because the entire phone memory is 4GB. You can expand userdata to max. 2.7GB, but I provided a solution for 2.5, because in case o SDCard failure on mount/unmount or other event, the phone will use those 270 MB from internal storage to function properly until you fix sdcard, without losing data. There are some solutions to expand data partition on sdcard, but I didn't tried them and I can't say you how that works. My ROM with 2.5 GB support will repartition userdata for you during install, and when the phone boots up you will see internal storage 2.5 GB instead of 1GB.
Ok, That covers all your concerns. Thank you for appreciations.
1. for Greek Language i think i am ok... as i can understand you import multilanguage support from Lenovo P770. how minideal managed to have Multilanguage support for 1.0.3 ?
did they import from another phone too?
2. another solution to install English CWM recovery is with Mobileuncle MTK Tools. do you agree? but thanks for your help for SPFlashTools.
ZTE USB Driver.zip ,MT6589 drivers.zip, MT6589 USB VCOM drivers.7z. which of the 3 drivers to install in order my PC to recognize my
phone? how to enter CWM? what do i need to press?
3. i want to have your SLIM version but with Google Play Store installed. how can i do this?
Are we sure that the problem with WIFI and GPS not working correctly after phone starts from sleep (Scheduled power on & off) is a problem
of ORIGINAL version? maybe it is sth eith your rom.... can someone confirm that?
4. what is the purpose of Extend2_5GBUserData.zip ???
before i had Xperia Sole . because the internal available memory for installed apps and games was about 4 GB some people developed a
tool to swap the internal memory with the external SD card. in this way if someone has 16 GB external SD card he/she can install BIG games without capacity problems
http://forum.xda-developers.com/showthread.php?p=36452468
how to succeed such thing with ZTE V967S ?
carliv said:
You're welcome!
Now, let's see:
1. No ROM is full multilanguage, except the case that all apps have multilanguage support. Otherwise, my version is as much multilanguage as minideal version from what I've seen - I ported translations from a Lenovo P770 because is very much similar. You will have Greek just like in minideal version.
We can try togheter to make a better translation if other users want that; I can post here archives with xml files that have to be translated, you make translations, post here back and I could integrate them in a ROM. That way we can translate even SystemUI, which now isn't.
2. To install CWM the easy way is with SPFlashTools - all you need is the scatter and recovery.img. Of course, you have to install proper drivers before - you can find them in first post. How to use SPFlashTools I can't reproduce here because there are several guides on forum, here is one of them. Just one thing: if you find hard to enter the phone in bootloader, just remove the battery and connect the phone to computer without battery - it will enter in bootloader automate.
3. I don't have gapps in my phone SLIM ROM, but version posted to download has, because many of you use them - I don't. The GPS is working perfect for me, the only bug I found untill now, and don't think is related to my work, but to original release, is that if you use Scheduled power on & off, after phone starts from sleep you have to reboot manualy, otherwise Wifi and GPS won't work correctly. I hope they'll solve that in a next release like they did with camera flash. But, overall slim or full version shares the same drivers, modules and libraries, and only difference is in installed apps. The full version has stock launcher and weather, and live wallpapers, etc. The slim version don't have those things.
4. You can't use a 5GB userdata partition because the entire phone memory is 4GB. You can expand userdata to max. 2.7GB, but I provided a solution for 2.5, because in case o SDCard failure on mount/unmount or other event, the phone will use those 270 MB from internal storage to function properly until you fix sdcard, without losing data. There are some solutions to expand data partition on sdcard, but I didn't tried them and I can't say you how that works. My ROM with 2.5 GB support will repartition userdata for you during install, and when the phone boots up you will see internal storage 2.5 GB instead of 1GB.
Ok, That covers all your concerns. Thank you for appreciations.
Click to expand...
Click to collapse
---------- Post added at 02:42 PM ---------- Previous post was at 02:30 PM ----------
i can not understand what is LewaOS v5 ??? what are the differences with your modded rom?
gvekiaris said:
1. for Greek Language i think i am ok... as i can understand you import multilanguage support from Lenovo P770. how minideal managed to have Multilanguage support for 1.0.3 ?
did they import from another phone too?
2. another solution to install English CWM recovery is with Mobileuncle MTK Tools. do you agree? but thanks for your help for SPFlashTools.
ZTE USB Driver.zip ,MT6589 drivers.zip, MT6589 USB VCOM drivers.7z. which of the 3 drivers to install in order my PC to recognize my
phone? how to enter CWM? what do i need to press?
3. i want to have your SLIM version but with Google Play Store installed. how can i do this?
Are we sure that the problem with WIFI and GPS not working correctly after phone starts from sleep (Scheduled power on & off) is a problem
of ORIGINAL version? maybe it is sth eith your rom.... can someone confirm that?
4. what is the purpose of Extend2_5GBUserData.zip ???
before i had Xperia Sole . because the internal available memory for installed apps and games was about 4 GB some people developed a
tool to swap the internal memory with the external SD card. in this way if someone has 16 GB external SD card he/she can install BIG games without problems
http://forum.xda-developers.com/showthread.php?p=36452468
how to succeed such thing with ZTE V967S ?
Click to expand...
Click to collapse
I don't know how minideal got their translation, maybe they did it, it's not that hard, there are 4 files to translate to every language, and other 2 if you want SystemUI too, but you have to know a lot of foreign languages. That's the reason I said we can make a better translation, but everyone have to translate from English to his language.
Yes, you can install recovery with MobileUncle but you have to be rooted and to have MobileUncle installed. The way I presented works even for untouched stock ROM. Don't matter which order you install drivers. Install them all one by one, and connect phone in normal boot and wait for windows to install previous drivers for the new device, then connect phone in bootloader and wait again for windows to install necesary drivers.
The slim version posted here is with gapps included, you don't have to do anything for that - I thought I made myself clear. The version without gapps I kept it for me, I didn't share it. Most people want gapps and there was no reason to upload a version without them. No, I don't think that refresh for GPS and wifi has anything to do with my intervention, it's related to the way the phone enter to sleep and wake up, because is not completely shut down. My guess is that on wake up, not all modules are started properly, and that's the reason a phone restart solve the problem: when Android starts all modules are loaded correctly.
The purpose of Extend2_5GBUserData.zip is, as I said in that post, that people who don't want to install any of my ROM with 2.5GB support, to achieve an extended partition while they keep their ROM: minideal, stock original, or others not shared by me.
I know about that thing with extend to sdcard, but I didn't tried yet, and from what I've seen compiling recovery, for this phone you need to unpack, repack recovery.img and boot.img too, to modify fstab, not only that from etc folder. So, it's a little bit more complicated. Some people made some scripts for that for this kind of phones but for different cpu. I can't help you with this matter, because I'm not interested in it. For me 2.5GB of internal memory is more than enough.
LewaOS v5 is a different framework, more like MIUI, but with different launcher type. I did a debloated version, because LewaOS is mainly for China, and they have a lot of chinese apps. The people that download it they know what is. I used to like it, but now, the ZTE ROM, optimized please me more.
thanks for your help. I am really appreciate this. so if I want to extend my internal storage to 2,5 GB directly to minideal modded rom version I need to flash Extend2_5GBUserData.zip via CWM. right? there is no need to install first your modded version.
how to connect my phone in bootlader mode???
so you propose me to install lite version. I will give a try when my phone come to my hands!!!
one more question maybe not suitable for this thread but I wll ask you. do you know to propose me good screen protectors and slim caces for ZTE V967s? I heard that V987 quad uses the same protectors and caces with V967s. is it true?
gvekiaris said:
thanks for your help. I am really appreciate this. so if I want to extend my internal storage to 2,5 GB directly to minideal modded rom version I need to flash Extend2_5GBUserData.zip via CWM. right? there is no need to install first your modded version.
how to connect my phone in bootlader mode???
so you propose me to install lite version. I will give a try when my phone come to my hands!!!
one more question maybe not suitable for this thread but I wll ask you. do you know to propose me good screen protectors and slim caces for ZTE V967s? I heard that V987 quad uses the same protectors and caces with V967s. is it true?
Click to expand...
Click to collapse
Ok.
I don't use any screen protector. The screen is Gorilla Glass and you can't scratch it even if you want. Actually I can't find that info now, I've read that ZTE support answer that to a user. On official description is an IPS screen. But seems to be very hard. I've tested it with door key, really :good:
And the case... Mine came with some sillicone cheep case, I don't like it. I don't know if the case from v987 fits, because I know that v987 is 0.7mm thinner.
so you have this phone and you bought it from minideal.net. right?
you make me happy. but I am not sure for Gorilla Glass. the specifications does not mention that. and Greek guys say that is normal glass not Gorilla. are you sure for that? if you use your nails it will not scratch the screen.
also you have not answered me for Extend2_5GBUserData.zip
can I flash it directly to minideal modded version or is it necessary to flash your rom first?
about a slim case fitted exactly to our phone do you have sth in your mind to buy ?
also how do you find the photo and video quality of the camera?
thanks for all. you are great
carliv said:
Ok.
I don't use any screen protector. The screen is Gorilla Glass and you can't scratch it even if you want. I've tested it with door key, really :good:
And the case... Mine came with some sillicone cheep case, I don't like it. I don't know if the case from v987 fits, because I know that v987 is 0.7mm thinner.
Click to expand...
Click to collapse
gvekiaris said:
so you have this phone and you bought it from minideal.net. right?
you make me happy. but I am not sure for Gorilla Glass. the specifications does not mention that. and Greek guys say that is normal glass not Gorilla. are you sure for that? if you use your nails it will not scratch the screen.
also you have not answered me for Extend2_5GBUserData.zip
can I flash it directly to minideal modded version or is it necessary to flash your rom first?
about a slim case fitted exactly to our phone do you have sth in your mind to buy ?
also how do you find the photo and video quality of the camera?
thanks for all. you are great
Click to expand...
Click to collapse
Ok, I modified that to official infos, IPS screen. I've read that in an email support answer from ZTE, but I can't find now the source.
About Extended 2.5 GB I already told you two times, you can use it with any ROM, or to be specific: you can flash it on your minideal ROM.
...
The same steps for those who want only to increase userdata partition, without installing any of my ROM. But you have to download Extend2_5GBUserData.zip from attachments....
Click to expand...
Click to collapse
...The purpose of Extend2_5GBUserData.zip is, as I said in that post, that people who don't want to install any of my ROM with 2.5GB support, to achieve an extended partition while they keep their ROM: minideal, stock original, or others not shared by me....
Click to expand...
Click to collapse
Damn, I thought my English wasn't that bad... Hm... I wonder, there are out there other people who don't understand me too?
I don't know any case because I don't use one, but I read somewhere, I don't remember where, about a leather case for it. I don't know more.
The camera is average, but I didn't expect much from it, I have a DSLR camera for photos.
Cheers.
sorry my friend. just wanted to be sure !!!! sorry if you repeat some things twice for me.
in what way do u extend the data size up to 2,5 gb ? is it dangerous for the phone or does it has any effect to the performance and speed of the phone?
about the screen I have read in the official specifications that it is IPS and not Gorilla glass.
but first as you said somewhere read that it is Gorilla. and secondly you tried with your nails and key to scratch the screen without damages. if the screnn was just IPS this would never happened. what to say?????
I am a little sad with the picture quality!!! never mind.
thanks
carliv said:
Ok, I modified that to official infos, IPS screen. I've read that in an email support answer from ZTE, but I can't find now the source.
About Extended 2.5 GB I already told you two times, you can use it with any ROM, or to be specific: you can flash it on your minideal ROM.
Damn, I thought my English wasn't that bad... Hm... I wonder, there are out there other people who don't understand me too?
I don't know any case because I don't use one, but I read somewhere, I don't remember where, about a leather case for it. I don't know more.
The camera is average, but I didn't expect much from it, I have a DSLR camera for photos.
Cheers.
Click to expand...
Click to collapse
gvekiaris said:
sorry my friend. just wanted to be sure !!!! sorry if you repeat some things twice for me.
in what way do u extend the data size up to 2,5 gb ? is it dangerous for the phone or does it has any effect to the performance and speed of the phone?
about the screen I have read in the official specifications that it is IPS and not Gorilla glass.
but first as you said somewhere read that it is Gorilla. and secondly you tried with your nails and key to scratch the screen without damages. if the screnn was just IPS this would never happened. what to say?????
I am a little sad with the picture quality!!! never mind.
thanks
Click to expand...
Click to collapse
Well, the method for repartitioning is presented here by meteos. You just need to modify in hex editor some values for Extended Boot Records EBR1 and EBR2. It's not dangerous if you don't make mistakes and enter some values that extend userdata more than 2.7 GB, and that wipe some portion of primary partition. In that case you will have a bricked phone and you can repair it, only by reflashing entire ROM in SPFlashTool.
EBR is for logical partition (userdata, phone storage or internal sdcard) and MBR for primary partition (Boot, Recovery, System..).
My archives are safe, and I've tested both myself without any problem. I'm using now a slim ROM with 2.5GB userdata (internal memory).
You're welcome.
thanks for your help.
you are always helpfull.
if you have any news for new scripts which swap the internal memory with our external SD card memory just inform us..
did you try to play heavy games? does the phone play them smoothly?
if you increase the storage to 2,5 gb what do you choose in storage option : auto , sd or internal storage?
a greek friend of me tried your SLIM rom. he said it is very LIGHT and FAST. But he has problem to select GREEK keyboard. he selects greek keyboard but the choice can not be saved. please try to fix this!!!
carliv said:
Well, the method for repartitioning is presented here by meteos. You just need to modify in hex editor some values for Extended Boot Records EBR1 and EBR2. It's not dangerous if you don't make mistakes and enter some values that extend userdata more than 2.7 GB, and that wipe some portion of primary partition. In that case you will have a bricked phone and you can repair it, only by reflashing entire ROM in SPFlashTool.
EBR is for logical partition (userdata, phone storage or internal sdcard) and MBR for primary partition (Boot, Recovery, System..).
My archives are safe, and I've tested both myself without any problem. I'm using now a slim ROM with 2.5GB userdata (internal memory).
You're welcome.
Click to expand...
Click to collapse
gvekiaris said:
thanks for your help.
you are always helpfull.
if you have any news for new scripts which swap the internal memory with our external SD card memory just inform us..
did you try to play heavy games? does the phone play them smoothly?
if you increase the storage to 2,5 gb what do you choose in storage option : auto , sd or internal storage?
a greek friend of me tried your SLIM rom. he said it is very LIGHT and FAST. But he has problem to select GREEK keyboard. he selects greek keyboard but the choice can not be saved. please try to fix this!!!
Click to expand...
Click to collapse
Ok, sorry for late answer. I was busy to update recovery to 6.0.3.6 version.
Now, I don't have time to play games, I never installed one in my phone, so.. I don't know how they work in it.
The increased storage is for memory (if you install heavy apps which needs a lot of memory, they use that as virtual memory). I select always sdcard in storage options as default.
I don't know why your friend has trouble to set greek keyboard. I selected it, test it, reboot phone - still there. To select: Settings - Language & Input - KEYBOARD & INPUT METHODS - Android keyboard settings - select only languages you use and deselect others - go back - Default - select Greek - exit - done.
I know it's light and fast, I wanted to be.
LewaOS.. can you port a asop like rom? like bgcngm v970 is very good..
god_md5 said:
LewaOS.. can you port a asop like rom? like bgcngm v970 is very good..
Click to expand...
Click to collapse
LewaOS is not ported, it's only optimized.
The stock optimized version is on aosp base.
Hello everyone,
I have bought various Android TV boxes in the past, and haven't had problems getting them up and running.
I recently ordered 2 chinese models from eBay however, which are giving me nothing but grief. I apologize in advance for such a loooong post, but I am at my wits end and I am really hoping someone can help me out.
The action was for this model here:
www.ebay.com.au/itm/231275032090
It appeared to be a pretty standard model, like a Justop 4.0, but with a hard switch where the optical should be, and a cut down remote.
Firstly, the Specifications according to the auction:
1GB ddr3
4GB nand flash
Allwinner A20 dual core 1GHz CPU
On closer inspection after receiving the unit, an additional physical difference is that the reset button appears to be between the USB ports, instead of behind the AV out - not a big deal.
After powering it up, I am having huge problems with them.
Firstly though, what the software says about the hardware:
Advanced Settings/About Tablet:
Model Number : BBA22
Android Version : 4.2.2
Firmware Version : V2.0
Kernel Version : 3.4.39 [email protected] #10 Wed May 14 22:36:36 CST 2014
Build Number : BBA22-UI4-V2.0.1
And what Droid Info says about the (relevant)hardware:
Model : BBA22 (sdk-normal)
Manufacturer : unknown
Chipset : sun7i
RIL version : sw-dataonly-ril-0.5
Build Number : BBA22-UI4-V2.0.1
Build Bingerprint : softwinners/ninss/ninss4.2.2/NinssSoftware/20140521:eng/test-keys
OS Version : Jelly Bean MR1 (4.2.2)
SDK : 17
CPU Architecture : ARMv7 Processor rev 4 (v71)
Now, the BIGGEST issue these things have, is that at random points of use, it comes up with a message "Warning - System configuration is inconsistent with the production configuration, please contact your supplier, thank you!". This message will flash over and over again for anything from 30 seconds to half an hour. I half suspect it has tablet code SOMEwhere in it also, as it keeps coming up with 'touch the circle' walkthroughs for applications like avia. This might be unrelated though, I have no idea.
So anyway, I have tried doing the Justop 4.0 flash method with a SD card, however it will not turn on if there is a card in the slot. Also, when you hold the reset button down and power it up, it does not seem to go into the diagnostic mode so I can't flash it that way either. I am guessing the ONLY way I can update short of soldering in a serial port, is to use the backup/restore function.
I read through this whole thread here, but cound not fine anything to help me:
http://forum.xda-developers.com/showthread.php?t=2398632
If anyone has any ideas, please let me know, I seriously can't get anything to work. I thought maybe the 'hotspot' being enabled was causing the incinsistency problem, but I used a process killer to stop that at startup, still no luck. Doing a system reset through advanced config didn't help either, I got the error almost as soon as turning the unit back on.
I've attached pictures of the error I am getting, the top of the board, and the back if the board.
Cheers,
Smak
PS - I am yet to hear back from the seller, but if I ever do, I will post the result here...
Smakky said:
Advanced Settings/About Tablet:
Model Number : BBA22
Android Version : 4.2.2
Firmware Version : V2.0
Kernel Version : 3.4.39 [email protected] #10 Wed May 14 22:36:36 CST 2014
Build Number : BBA22-UI4-V2.0.1
Click to expand...
Click to collapse
I seem to be in a very similar situation. My device also reports as being "BBA22" but it's a different form factor and the identification on the board is "TXCZ_A20_v1.0". I tried contacting the people that made the board (Shenzhen Tianxing Chuangzhan Electronic Co.) but they refused to help. I also tried contacting the company that made the firmware images (Shenzhen NINSS Technology Ltd.) and they also refused. The supplier I bought the device from says they have the image file but they can't seem to figure out how to get it to me (they tried emailing the +200mb file then they gave up and stopped responding). The build number on my device is "BBA22-UI4-V2.0.4" so apparently there's an update available that may work on your device.
I'm pretty sure you need to flash the image using the Phoenixsuit program to make a special sdcard that you place in the device and boot from to reflash the device.
Please post your image file if you ever get it!
tisdall said:
I seem to be in a very similar situation. My device also reports as being "BBA22" but it's a different form factor and the identification on the board is "TXCZ_A20_v1.0". I tried contacting the people that made the board (Shenzhen Tianxing Chuangzhan Electronic Co.) but they refused to help. I also tried contacting the company that made the firmware images (Shenzhen NINSS Technology Ltd.) and they also refused. The supplier I bought the device from says they have the image file but they can't seem to figure out how to get it to me (they tried emailing the +200mb file then they gave up and stopped responding). The build number on my device is "BBA22-UI4-V2.0.4" so apparently there's an update available that may work on your device.
I'm pretty sure you need to flash the image using the Phoenixsuit program to make a special sdcard that you place in the device and boot from to reflash the device.
Please post your image file if you ever get it!
Click to expand...
Click to collapse
That is good to know, I might email them again now. Will let you know the outcome!
OK, so I got a reply from the seller.
I've attached the patch file and the instructions to this message, but theres a few things to note.
- Its only like 20 meg big, so it isnt a full firmware update
- The instructions talk about pressing the reset button at the start.., I don;t think this is neccesary if its rooted already
- The instructions are VERY engrish-y, basically just dump the update.zip onto a sd card, and apply the patch through the settings menu
- The default language is changed to some form of Chinese after applying, theres plenty pictorials on how to change the android language though.
- The version has been updated from BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3 - This is still lower than the one you mentioned @ BBA22-UI4-V2.0.4
So far though, I have re-installed all my apps, and haven't seen the error.. yet. I was a little concerned it is still giving me touchpad tutorials, but mouse mode on the remote is making short work of those.
I'll just have to wait and see, I guess.
Smakky said:
OK, so I got a reply from the seller.
I've attached the patch file and the instructions to this message, but theres a few things to note.
- Its only like 20 meg big, so it isnt a full firmware update
- The instructions talk about pressing the reset button at the start.., I don;t think this is neccesary if its rooted already
- The instructions are VERY engrish-y, basically just dump the update.zip onto a sd card, and apply the patch through the settings menu
- The default language is changed to some form of Chinese after applying, theres plenty pictorials on how to change the android language though.
- The version has been updated from BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3 - This is still lower than the one you mentioned @ BBA22-UI4-V2.0.4
So far though, I have re-installed all my apps, and haven't seen the error.. yet. I was a little concerned it is still giving me touchpad tutorials, but mouse mode on the remote is making short work of those.
I'll just have to wait and see, I guess.
Click to expand...
Click to collapse
That seems very promising for you! Unfortunately it probably won't help me at all... It sounds like it's a sort of update patch instead of a whole image. Starting the device with the reset button causes it to load the recovery partition instead of the regular partition (I'm guessing you saw a green android with a text menu with options for recovery). I full flashing would/could involve an SDcard, but I think you would have to create it with Phoenixsuit and not just copy the file contents over (it would then just boot directly from the SDcard and you wouldn't need to press the reset button).
In my case, both the regular boot partition and the recover partition are wrecked so I couldn't even try this patch if I wanted to.
Thanks for posting, though... Hopefully it helps someone else out.
tisdall said:
That seems very promising for you! Unfortunately it probably won't help me at all... It sounds like it's a sort of update patch instead of a whole image. Starting the device with the reset button causes it to load the recovery partition instead of the regular partition (I'm guessing you saw a green android with a text menu with options for recovery). I full flashing would/could involve an SDcard, but I think you would have to create it with Phoenixsuit and not just copy the file contents over (it would then just boot directly from the SDcard and you wouldn't need to press the reset button).
In my case, both the regular boot partition and the recover partition are wrecked so I couldn't even try this patch if I wanted to.
Thanks for posting, though... Hopefully it helps someone else out.
Click to expand...
Click to collapse
Hmm, is clockworkmod still a thing? I could try taking a backup of my ROM and see if that's something you can use.., only problem is I will need a bit of time. If I get a chance, I'll do it over the weekend. I will need a place to dump the image though, it will be too big to attach here, can sort that out later though.
Smakky said:
Hmm, is clockworkmod still a thing? I could try taking a backup of my ROM and see if that's something you can use.., only problem is I will need a bit of time. If I get a chance, I'll do it over the weekend. I will need a place to dump the image though, it will be too big to attach here, can sort that out later though.
Click to expand...
Click to collapse
I'd appreciate that... Your board seems to have a completely different layout, but all the same components. I'm not familiar with clockworkmod, though, so I'm not sure how that backup would work. I guess I'd need to get clockworkmod flashed on to the recovery partition first and then I could flash the backup to the NAND from there?
tisdall said:
I'd appreciate that... Your board seems to have a completely different layout, but all the same components. I'm not familiar with clockworkmod, though, so I'm not sure how that backup would work. I guess I'd need to get clockworkmod flashed on to the recovery partition first and then I could flash the backup to the NAND from there?
Click to expand...
Click to collapse
I'm not actually too sure. The last timed I used clockworkmod was for flashing a galaxy s2 phone, so I'm not even too sure if its still around or compatible with tv boxes. There will definately be SOME sort of tool though, that can take a full backup suitable for restoring. I'm about at the limit of my knowledge, so I am sort of playing by ear and going into a google-learn-try sort of cycle as I try different things. Maybe someone with more experience will stumble in here and let us know what we need to do
This is interesting... I found another device with an identical PCB board: YBKJ_A20 (I can't post links yet, but a Google search will find it) Several chips are different so the firmware would differ. It's so hard to work with these devices when no one claims credit for making a lot of these things!
What is J4?
http://dl-1.va.us.xda-developers.com/2/9/3/6/8/3/3/DSC_0207s.jpg
I was wondering what the upper left 2 pin connector is for? (the little white 2 pin plug next to the USB)
Is it SPDIF? Power input? output? Something else? I see in this picture a cable connected so i'm hoping you can tell.
Ask BBA22-V.1.50 TV BOX Model Android 4.2 Firmware
Smakky said:
OK, so I got a reply from the seller.
I've attached the patch file and the instructions to this message, but theres a few things to note.
- Its only like 20 meg big, so it isnt a full firmware update
- The instructions talk about pressing the reset button at the start.., I don;t think this is neccesary if its rooted already
- The instructions are VERY engrish-y, basically just dump the update.zip onto a sd card, and apply the patch through the settings menu
- The default language is changed to some form of Chinese after applying, theres plenty pictorials on how to change the android language though.
- The version has been updated from BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3 - This is still lower than the one you mentioned @ BBA22-UI4-V2.0.4
So far though, I have re-installed all my apps, and haven't seen the error.. yet. I was a little concerned it is still giving me touchpad tutorials, but mouse mode on the remote is making short work of those.
I'll just have to wait and see, I guess.
Click to expand...
Click to collapse
Hello
Thank You For This Firmware But It Work For BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3.
My Device Model is ((BBA22-V.1.50)) with Android 4.2 and I had to update it with your firmware file to fix problem black page after boot.
after update my device with your firmware, black page broblem is solved but device not work properly and it show Error message for (android.process.acore) systematically in loop!
also I can not make very actions because this error message show repeatedly.
also the default device language is china and i can not change language (error message show repeatedly)
have you original firmware for ((BBA22-V.1.50)) with Android 4.2 device???
thank you for help me...
H.SHAFAGHI said:
have you original firmware for ((BBA22-V.1.50)) with Android 4.2 device???
Click to expand...
Click to collapse
So... For everyone looking for a full firmware for this box, and stumbled upon this thread from google like I did: DESPAIR NO MORE.
I found a compatible firmware for this device (exacly as described and same board as the one OP has) It will work even if your box came preinstalled with another software version, but its the same hardware
Found it in another thread, posted by @daaviles30 Its not EXACLY the same as the one I had originally loaded but appears to work without any issue whatsoever (even the remote works), if a little bit better.
So here it is:
daaviles30 said:
A20_V20_SDK_EN_XBMC_0703-2.img*491.4 MB
*https:/ /mega.co.nz/#!XAIRiD5Q!aIb0tvvjvzUdaf11vIR7PAadeXPV8XizYJ9X2mAzpQI
RH46-update-a20.zip*582 KB
*https:/ /mega.co.nz/#!HZwTgQIT!LQGxb6R-lCIKe58RgIGROfufY-aq5PODSAq3-NPKOeo
PhoenixCard_V309
*http:/ /mega.co.nz/#F!HAIhBJyS!L_UQPNnYdPyHTD3ggnJ6OA
After flashing update and then go to the play store and download SuperSU update that and your ready to go.
---------- Post added at 03:57 PM ---------- Previous post was at 03:29 PM ----------
Titanium Backup Pro v6.1.5.3.apk*6.2 MB
*https:/ /mega.co.nz/#!vAAWRJga!vOFKlAq_25ssrG5kvwa3-oC-d0saL06YGBIWIyN2jss
You can delete all the unwanted system apps with this app.
Hope this helps Happy New Years.
Click to expand...
Click to collapse
The flashing process is exacly as described earlier in this thread. Use phoenix card to burn the img to an SD card, turn the device on with the card inserted in the slot and enjoy your restored android box.
It Working Only With Booting From Memory Card Slot...
amedeh123 said:
So... For everyone looking for a full firmware for this box, and stumbled upon this thread from google like I did: DESPAIR NO MORE.
I found a compatible firmware for this device (exacly as described and same board as the one OP has) It will work even if your box came preinstalled with another software version, but its the same hardware
Found it in another thread, posted by @daaviles30 Its not EXACLY the same as the one I had originally loaded but appears to work without any issue whatsoever (even the remote works), if a little bit better.
So here it is:
The flashing process is exacly as described earlier in this thread. Use phoenix card to burn the img to an SD card, turn the device on with the card inserted in the slot and enjoy your restored android box.
Click to expand...
Click to collapse
Hello My Friend And Thank You For Replay...
This Android is Working And is Very Good But i Can Not Install This To My Device. I Copy The IMG File To A External Memory Card (Using PhonixCard Application) and put the Memory Card To My Device And PowerOn My Device. My Device Automatically Boot From Memory Card And New Android is Appear. It Is Very Fast And Have No Errors.
Now...
HOW I CAN INSTALL THE IMG FILE TO MY DEVICE (INTERNAL MEMORY) AND BOOT MY DEVICE WITHOUT USING MEMORY CARD (FOR ALL TIMES)???
H.SHAFAGHI said:
Hello My Friend And Thank You For Replay...
This Android is Working And is Very Good But i Can Not Install This To My Device. I Copy The IMG File To A External Memory Card (Using PhonixCard Application) and put the Memory Card To My Device And PowerOn My Device. My Device Automatically Boot From Memory Card And New Android is Appear. It Is Very Fast And Have No Errors.
Now...
HOW I CAN INSTALL THE IMG FILE TO MY DEVICE (INTERNAL MEMORY) AND BOOT MY DEVICE WITHOUT USING MEMORY CARD (FOR ALL TIMES)???
Click to expand...
Click to collapse
Wow.
The Phoenixsuite makes an sdcard that flashes the internal memory. After it's finished flashing, you take the card out and it runs off of the internal NAND. That's it. It never runs the Android from the sdcard.
My device can boot from sd-card!!! I need to flash this to install your android!
tisdall said:
Wow.
The Phoenixsuite makes an sdcard that flashes the internal memory. After it's finished flashing, you take the card out and it runs off of the internal NAND. That's it. It never runs the Android from the sdcard.
Click to expand...
Click to collapse
Hello My Friend And Thank You For Replay...
1- My Device Can Boot From SD-CARD With A Bootable Memory Card! (Such As OpenSuse Linux)
2- I Use PhonixCard Application That You Send.
(PhoenixCard_V309
*http:/ /mega.co.nz/#F!HAIhBJyS!L_UQPNnYdPyHTD3ggnJ6OA
3- I Can Not Use PhonixSuit Application And I Don't Know How To Use PhonixSuit. When I Connect My Device To My Computer To Use PhonixSuit, My Computer Don't Find Any Hardware And Can Not Connect!
4- I Copy The IMG File To A SD-CARD (Using PhonixCard Application) and put the Memory Card To My Device And PowerOn My Device. My Device Automatically Boot From Memory Card And New Android is Appear. If Unplug The SD-CARD And Power On My Device, Old Android Is Appear!!! Master Android Software Is In My Device And I Need To Clear This From My Device And Install Your Android!
HOW I CAN INSTALL YOUR ANDROID TO MY DEVICE (INTERNAL MEMORY) AND BOOT MY DEVICE WITHOUT USING MEMORY CARD???
I need help!!!!
no any answer???