Related
Dear all expert,
While trying to flash my German Black O2 mini from Ger to ENG. (Using MAupgrade_noID)
After some steps, the o2 mini turn black and display
"Serial V1.02"
At this time, even though I softreset or hardreset the device,
the same wording also appear and can't further boot.
I even use SD card method but the same wording still appear again.
Can any expert teach me how to rescure my device?
Thanks
Are you sure you did the SD-method right?
At OS 1.13.01 GER Radio 1.13.00 BigStorage you will find the latest german BigStorage ROM image available. Now do the following:
Get ntrw from this site
Get a 512 MB SD-card (maybe a 128 MB one will work, too, but I am unsure about this).
Put ntrw into C:\
Extract the RAR into C:\, which should produce C:\11301bs.nb1
Enter the following into the command line at C:\:
Code:
ntrw write 11301bs.nb1 [your SD-card drive letter, e.g. I:]
, ignore error messages
Fully load your Magician!
Disconnect your Magician from anything, especially USB
Shutdown your Magician (press power button)
Put the SD-card into the Magician
Put Magician into Bootloader-Mode (Camera+Power+Reset at once, until you have the "Serial 1.02" screen w/o backlight)
Wait some seconds for "Press power to flash" to show on screen. Do just that.
This might just work.
Thanks KK.
What's wrong is that, it seem the bootloader is dead.
WHile I input the SD card while enter into the bootloader.
The screen still display "serial V1.02" and hold it.
No further wording like "Press power to flash it" etc.
Is it the bootloader is dead?
I do not think so. Make sure you shut down the Magician before placing the SD-card with a fresh ROM-image written to it into your device. Power on into Bootloader-Mode afterwards.
Another option to check your loader is the following:
Shutdown the Magician
Go into Bootloader-Mode
Wait for "Serial 1.02" to be displayed
Connect to PC via USB. The Bootloader should display "USB" shortly after connecting. If it does not: Maybe really you managed to kill your loader.
What exactly did you do? I used the NOID-Tool too, and had absolutely no problems with it. Besides: I also have a bootloader version 1.02.
kk
While plugging the usb cable to the device , yes, it show "USB" on the screen then.
However, when I use the romupdate.exe and try extract the rom into SD card at this time. After pressing "d2s" , the device shut down at once. No words appear on the screen.
Do you know what does it mean?
Besides, can you tell me what is "NOID-Tool" ?
thanks
The NOID-Tool would be MAupgrade_noID, which you used.
I am not sure about it, but as your device does not boot into the OS anymore, it seems reasonable to assume, that the ROM in your device is not valid anymore, due to errors while flashing it in the first place.
So - if there is no valid ROM, there is nothing, which the bootloader can write onto the SD-card.
Please try the method suggested in previous postings before anything else. If all this fails, I have no further suggestions - your device might really be dead.
You can try regular upgrade insted of doing it through SD card.
Danload shipROM, extract it and use MAupgradeNOID to run ROM and that is all you should do.
kk said:
At OS 1.13.01 GER Radio 1.13.00 BigStorage you will find the latest german BigStorage ROM image available
Click to expand...
Click to collapse
Hi,
Can you upload the rom again pls? Someone removed it from the ftp site. Like to give it a try, but can't find a prepared BS-rom anywhere.
Thnx, M
kk said:
At OS 1.13.01 GER Radio 1.13.00 BigStorage you will find the latest german BigStorage ROM image available
Click to expand...
Click to collapse
Hi,
Can you upload the rom again pls? Someone removed it from the ftp site. Like to give it a try, but can't find a prepared BS-rom anywhere.
Thnx, M
Hi there!
The FTP-master kindly converted the file to ZIP format. It is now available here: ftp://xda:[email protected]/Magician/BigStorage_ROMs/DE_T-Mobile_1.13.01.zip.
Remember: I used a 512 MB SD-card to create it, so maybe it won't work with smaller ones (but I think it should, since the ROM stored within this SD-card-image is no more than 64 MB in size).
Hi KK,
I found it along with the other BS roms and feel ashamed I couldn't find them. I tried it first with my 512MB card, but the cardreader won't write the file (no question about formatting whatsoever). Tomorrow I'm going to try with my 256MB mini SD card, which I know will be written by NTRW. I'll let you if I succeeded.
Regards, M
It works for sure with my 512 MB Kingston SD-card!
Don't bother about an error at the end of the ntrw-writing process. That's absolutely normal, since it would like to make the SD-card-drive the current drive, which is not possible after the writing process, as the SD-card now contains a ROM-image instead of a valid filesystem.
Hi KK,
Didn't manage to get it flashing. I used both cards but my magician doesn't accept the image somehow. No sign of any message like 'press power to load', not on serial nor on usb connection in the bootloader. It did work before with my own dumped rom, but lost the storage than, but it did accept the rom. Now it keeps awful quiet, I copied the first bytes and all, so maybe I'll give it a try with another rom. I want to sort this problem out.
Cheers, M
nbfdec made my big storage
Hello KK,
Yesterday I tried with the steps from hlt, out of the radio 1.13 upgrade thread http://forum.xda-developers.com/viewtopic.php?t=32274. It doesn't involve any rom dumping or sd-card action whatsoever and it worked first time.Just one tool: nbfdec and a shipped rom. It is fast and simple. Thanks for your advices, hope others will try this method as well, because it is much easier than bigstorager and bytecopy etc.
M
The "no SD-card required"-method in this thread only works for shipped ROMs. The ROM i prepared is a combination of the latest german OS & Radio versions plus BigStorage, which is to my knowledge _not_ available in this combination elsewhere, and should therefore be the most up-to-date ROM usable for any german magician user with very few simple steps.
Since you require a non-german version, my ROM will not be appropriate for you, but this thread started out with a cry for help with a non-booting magician, and I thought, that my ROM-modification would be of some help here due to the simplicity in applying it and its actuality.
But be it as it may.
KK,
I had the same problem as Netmon, only bootloader and I couldn't make the sd flash. That's why I was looking for a decent rom. With the tooling found on this site I probably could turn my magacian from German to English again. Since all my storage was gone I could take the risc.
I solved my problem with the upgrade 1.13 thread and that method would have worked for Netmon to I guess, just put the magacian in bootloader connect to usb and flash with a German shipped rom or an altered version.
Anyway thanks for your time, M
Dear rilazi and all
The device has been proofed for dead by the manufacturer.
The symptom is
1) romupdate.exe can't detect the device
2) press softreset button can't reboot the device to normal screen, only display "Serial V1.02" on the screen
3) Use SD card method doesn't got any respone from the device, keep displaying "Serial V1.02"
4) Use shipped rom (with MaupgradeNo_id.exe) also can't detect the device.
I don't know whether it the V1.02 version of bootloader problem or not.
Before, I try to flash many time which it V1.01 with no problem.
So, all of the V1.02 German device (Black color Mini) should pay attention to it.
I have a bootloader v1.02, too. Absolutely no problems with flashing on my side.
Hello ppl
The other day i made my first bigstorage using rom 1.12.05PTB from i-mate, it run perfectly... no boot delays, random cold boots... nothing...
Yesterday i felt the need to test the new 1.13 rom and radio WWE, everything ok... no problem. but then i felt the need to go back to my language... and updated to 1.12.05PTB again but now without bigstorage...
Now the problem is that my storage simpy disapeard... how can i get it back?
Help please?
Goes back to BigStorage and fill up your /storage with 8-10MB (exceed 7MB) then put your wanted rom. New Rom will format your /storage and u it will come back without BigStorage.
Thanks. I will try it asap and post the result.
Thanks pmquan. it worked just fine
Mine is not formating.
I copied the same file more than once on the storage and had 9,7 MB usage.
Then i flashed with a official update and storage was back again.
But some of the files are also there, and i cant delete. i will try another time with one big file tommorow.
So, it seem that this solution not working.
After my last post i tried with one 12 mb file. Storage was missing.
Back to Big Storage and did it again with a 9 MB File. Storage was missing.
Last try was with 9 1MB files. Storage was missing.
Any suggestions?
Try to use 2 files 3MB don't fill over the 7MB... It worked for me hope it works for you to.
I fixed it!
Seems that the issue was that i did the bigstorage with an wwe rom upgrade, and than revert to tmde rom.
This morning i created a new bigstorage with a tmde rom, put all files from extrom in the storage ( i wanted to check if autorun would work if i put it in there - no success ). After that i flashed it again with the orig tmde rom, and during ce rom upgrade ther was a failure. Hard Reset, still in bootloader and started the upgrade again. After successfull upgrade i now have back my storage, with no files in it, and i can write and delete.
Now it could be that it was because of the:
- wwe<->tmde differences
- the failure during the upgrade ( whatever this could have done )
- just a little help from my guardian angel ( i only borrowed it from a colleague for a project where i needed this device, and i think he would bo not very happy without storage )
Maybe i will try it again if a can get my hands on an magician when one of my colleagues orders a new device... But for now i´m finished. Thanks.
Hi,
I've got a Touch Cruise that I've flashed several times three days ago.
First I've done the hardSPL flash, CID unlock and SIM unlock.
After this I've flashed with a 6.1 rom (M-Amine 2.0) but I was seaking for a more "finger-friendly" UI so I've tried Kostas's C2 rom.
It's after flashing with Kostas's C2 rom that the problem first appeared. After a hour I could'nt launch any software. As File Explorer was already executing, I tried to launch exe files directly, but there were no more files in phone storage memory.
I softreset the device and it failed to boot (everlasting windows starting logo).
I've hardreseted the device and it booted successfully.
So I flashed the device with pcarvalho eXtreme :
pcarvalho eXtreme (3.60.WM65X) ROM 3.19 R0 Release (101MB RAM) [23557] (non3D) [16-Apr] (fixed)
It flash well, run for two or three hours and I noticied that my ringtones mysteriously changed to the default one. Using the File Explorer I checked the content of storage memory and it was all corrupted. Missing folders, files with non-alphanumeric names in root folder...
After a hard-reset my phone works well.
Things I've done after each installation : Contact+sms restore using PPCPimBackup, TomTom installation (7.918.xxx)
My Rom :
OS Version : 5.2.23557
Radio Version : 1.59.46.12
Anybody knows where can it come from ?
Thanks
Boudin said:
Hi,
I've got a Touch Cruise that I've flashed several times three days ago.
First I've done the hardSPL flash, CID unlock and SIM unlock.
After this I've flashed with a 6.1 rom (M-Amine 2.0) but I was seaking for a more "finger-friendly" UI so I've tried Kostas's C2 rom.
It's after flashing with Kostas's C2 rom that the problem first appeared. After a hour I could'nt launch any software. As File Explorer was already executing, I tried to launch exe files directly, but there were no more files in phone storage memory.
I softreset the device and it failed to boot (everlasting windows starting logo).
I've hardreseted the device and it booted successfully.
So I flashed the device with pcarvalho eXtreme :
pcarvalho eXtreme (3.60.WM65X) ROM 3.19 R0 Release (101MB RAM) [23557] (non3D) [16-Apr] (fixed)
It flash well, run for two or three hours and I noticied that my ringtones mysteriously changed to the default one. Using the File Explorer I checked the content of storage memory and it was all corrupted. Missing folders, files with non-alphanumeric names in root folder...
After a hard-reset my phone works well.
Things I've done after each installation : Contact+sms restore using PPCPimBackup, TomTom installation (7.918.xxx)
My Rom :
OS Version : 5.2.23557
Radio Version : 1.59.46.12
Anybody knows where can it come from ?
Thanks
Click to expand...
Click to collapse
it can be a many number of things...but you can start by check the card first...every time you go from one rom to another check it and save things (important ones)
now you can only try to get things back with getdataback (always worked with me)...
cheers
Thanks for the answer. It's not my storage card that lose data but phones internal storage memory.
It happened again just now, while installing a cab file.
I've got the impression that it's linked to cab installer since the other times I have installed a CAB to (tomtom) but it could be the fact that cab installer is writing data on defective memory.
Is there a way to test the internal storage memory in order to check if the problem is hardware ?
Finally it happened again, without cab install, without any manipulation after the hard reset.
I switched back to M-Amine 2.0 (WM 6.1) and it seems to have resolved the problem.
It's like the file system driver used in windows mobile 6.5 don't works well with my phone, wich can explain the file renaming, file disappearance, directory loss etc...
I would like to have a solution to switch back to WM 6.5 and a more recent version of HTC applications, so if anybody have any idea where can it come from...
Sorry to post three messages in a row, but there may be a thing I misunderstood.
In Pcarvalho rom thread I've seen this :
There seem to be HR and MC losing data issues with some roms, so i recommend flashing a htc original rom and only then this one, before proceeding as always make a backup of all data before attempting to use this rom...
Click to expand...
Click to collapse
But I don't know what HR and MC stands for here.... Is this concerning only the Storage Card or phone's Internal memory can also be problematic ?
I may have to flash back to an official rom before try again a WM 6.5 rom.
The problem have disappeared since I'm back to a WM 6.1 rom
Boudin said:
Sorry to post three messages in a row, but there may be a thing I misunderstood.
In Pcarvalho rom thread I've seen this :
But I don't know what HR and MC stands for here.... Is this concerning only the Storage Card or phone's Internal memory can also be problematic ?
I may have to flash back to an official rom before try again a WM 6.5 rom.
The problem have disappeared since I'm back to a WM 6.1 rom
Click to expand...
Click to collapse
i've been trying with android while waiting for pcarvalho next release. i am using task29 and radio.nbh to clean up the rom. what i noticed is that ( and i believe) task29 does not really clean the ROM, because after flashing many times android ( and i always use Task29, then flash android rom) the problem that i have ( lock SD card and its r/o status) did not disappear. i've been switching from rom to rom to rom (different build) , trying to elimante the problem. at last i flash back pcarvalho's rom back, than task29, than back to android. the problem solve. i donno may be because task29 only perform quick format instead of full format. the problem stays. i think ( maybe i am wrong) the bigger the size of the rom file is better as it rewrite the whole rom instead of small section of rom.
i guess...
It's surely something like this, i've just flashed with an official rom and flashed with pcarvalho's one and this time it works like a charm. (by the way, thanks to all cookers for their works).
So the problem is resolved, I had misunderstood the problem of data loss as it does not affect only the storage card data but also phone's internal storage memory.
Thanks to all.
Hi, I am creating this thread for anyone who purchases the Ampe A85q Quad Core.
I got mine from FocalPrice Singapore for £70 (inc a £5 discount) just over a week ago and it runs great, at times so I am now looking at improving it, where possible and with the blessing of XDA here, I will post as much info as I can and hopefully do a few things to it, to make it better. I have already found some information out that I will share but having never replaced an existing Rom and such, I am hoping some help is available to guide where necessary.
Today my daughter bought it to me, it had locked up and crashed in an ON state. After a long-hold power, it switched off and switched back on as normal. I then factory reset it and then changed the language and disabled Google PinYin.
Confusingly, the Ampe website (szampe.com) shows the tablet labelled as a A8003QD but another googled site shows it listed as both. Having checked the makers site and specs I see it must be the same tablet. As this tablet is quite new, there are very few results for it.
Official link : http://www.szampe.com/en/Products_show.asp?id=180&i=4
Supporting site showing matching model number : tattoo-ipl.com/productsshow.asp?id=1619
Szampe is now offering a A8003QD Ampe Firmware Update, direct link :
2013/7/24 - http://www.szampe.com/UploadFile/file/2011-08/0335.rar (525MB) #Note I am yet to try this and will add any eventual outcome to this thread.
The download just finished. The rar file contains
FOLDER : A8003QD 爱魅 改乐投风格、4K不支持4个窗口播放的软件20130427 (translated = A8003QD love charm happy to vote to change style, 4K does not support 4 Window Play Software 20130427)
------ and contains >>>> aimei_anpei8003_a31s_v2.0_4.1.1_20130429_[1024x768_ctp兼容_双Camera0308_gsensor兼容_ddr360].img
FOLDER : 全志A31升级工具安装 (translated = Allwinner A31 upgrade tool is installed)
------ and contains >>>> 升级指南（A31主控）.doc (translated = Upgrade Guide (A31 Master))
------ and contains >>>> PhoenixUSBPro_Cn_V330_20121204.rar
------ and contains >>>> PhoenixSuitPacket-V1_0003Beta.rar
------ and contains >>>> PhoenixSuitPacket.msi
Having converted and translated the above .doc file I see some instructions on what to do, however some of the instructions appear to be missing. I need to get this done better so it can be followed properly.
Problems :
Rom language - The tablet came with English setup already. A factory reset changes this back to Chinese.
Keyboard is set to English UK.
Google PinYin can and is now disabled
Some of the features are still in Chinese and I cannot see a way to change them.
Some lag on boot up lasting for a while but appears to stop until put in sleep mode which starts again for a while.
As mentioned above a freeze/crash and black screen then remained after the sleep mode kicked in. Had to long-hold power to turn it off, when I switched it back on, it seems back to normal. I suspect this was caused by some app or other one of my kids installed.
Hopefully I can get this update done and see if things are better and if not, consider a rom replacement. #reboot required now as the windows installer is playing up as I cancelled the first pheonix installer to look for any newer and english version. Back later today.
Edit :
Managed to get through the firmware update and am now going to check it out to see if anything has improved. I think it may be best to give this a couple of days of letting the kids do their thing as well as my own. Of course I will update this again.
update : So after a few hours letting the kids do stuff and having a bit of a play myself, this firmware update really has improved the tablets running qualities. For example, the usage immediately after boot / browsing / gaming / pattern and face recognition unlock all seem to run flawlessly now. The face rec unlock used to sometimes not even load and go str8 to pattern, 30% of the time it wouldn't recognise me and was laggy to happen in most cases. This now runs rapid, loads every time and I think due to lighting and moving around the room, only failed to recognise me, once out of around 10 tries. I tried a game or two with the kids and found reactions were spot on every time, to screen touches. The kids felt it was running nicely now too.
Again, if I find anything contrary to this, i will add another update below.
http://s12.postimg.org/tsh261hl9/IMG_20130801_010116.jpg
At the moment, the tablet doesn't seem to be bloated with much un-needed software although I could probably look deeper and find some. Hwoever this is the part that is something I would love to know how to get rid of or change and is making me think about custom roms, if you look at the image above.
codQuore said:
s12.postimg.org/tsh261hl9/IMG_20130801_010116.jpg
At the moment, the tablet doesn't seem to be bloated with much un-needed software although I could probably look deeper and find some. Hwoever this is the part that is something I would love to know how to get rid of or change and is making me think about custom roms, if you look at the image above.
Click to expand...
Click to collapse
just change launcher.
apex launcher or other
---------- Post added at 06:09 AM ---------- Previous post was at 05:19 AM ----------
Can you tell us number build?
i dl file but seem to be old version.
bosondehiggs said:
just change launcher.
apex launcher or other
---------- Post added at 06:09 AM ---------- Previous post was at 05:19 AM ----------
Can you tell us number build?
i dl file but seem to be old version.
Click to expand...
Click to collapse
Can you tell me more about this launcher and what it does ?
The build number is in the .img filename above
------ and contains >>>> aimei_anpei8003_a31s_v2.0_4.1.1_20130429_[1024x768_ctp兼容_双Camera0308_gsensor兼容_ddr360].img
Ah I see your point... The sites homepage lists them with a different date so I'm not sure which one is correct.
szampe.com/en/index.asp
[Drive Download] A8003QD Ampe Firmware Update - 2013/7/24
Click to expand...
Click to collapse
see this:
http://gizmodo.com/six-android-launchers-to-supercharge-your-smartphone-804826752
i want to know build number when installed.
My original rom have fiber_8003-eng 4.1.1mater 20130517 test-keys
I thin A85 is for chineese market and A8003is for international.
bosondehiggs said:
see this:
http://gizmodo.com/six-android-launchers-to-supercharge-your-smartphone-804826752
i want to know build number when installed.
My original rom have fiber_8003-eng 4.1.1mater 20130517 test-keys
I thin A85 is for chineese market and A8003is for international.
Click to expand...
Click to collapse
I'm looking at various launchers at this moment. I'm toying with the idea for now.
The build number even though dated last week on the offiicial site for this tablet, is
fiber_8003-eng 4.1.1 MASTER 20130427 test-keys as shown in the img filename
I'm a little confused as to what has happened here. I checked the img file modified date on my pc and it indeed says it was last modified in April. Whatever has happened, the tablet is running much better, noticed by myself and the kids, so far.
thanks.
Maybe before you have an old firmware.
I try to install on mine but impossible , i don't remember message.
here is my rom original http://www.szsanei.com/support_down.asp?id=1056
if you want to try.
a85
hi i have the a85 with the a31s chip my device only has 8gig rom where the device description on your link says 16gig apart from that i dont know if there is anything different can i use this rom on my device or is there a risk of bricking the tablet
http://www.szampe.com/support_down.asp?id=1259
anyone tested the new firmware?
MataPollos82 said:
anyone tested the new firmware?
Click to expand...
Click to collapse
I am now still running the 24/July rom I found (see post one) and it seems better but not perfect. It seems like a need for TRIM as regards the problems with lag and crashing (trim or not, I am unsure of crashing part) when I reboot the tablet most problems are solved.
I do think we could do with a better rom, to be honest. I have not tried the roms mentioned by others on this thread.
Name: N83 quad-core version of the firmware
http://www.szsanei.com/support_down.asp?id=1056
Click to expand...
Click to collapse
for example.. I am not sure if I should try it, weary of deeper problems. I am a novice in the rom arena.
bosondehiggs said:
http://www.szampe.com/support_down.asp?id=1259
Click to expand...
Click to collapse
Hi. Since I last posted, my tablet seems to have nose dived into regurgitated mdoe. I can factory restore it using the Pheonix tool and a rom and it works but then WIFI refuses to enable and not long after changnig the language and disabling pinyin, it simply reboots and stays at the chinese boot up screen. I'm now trying the rom quoted above as it might solve the problem but I think there may be a hardware issue. When I do manage to get it worknig, it states 1GB of memory instead of what it should be, 8GB - tax
I am a little worried now as I have heard returning this tablet to where I purchased it, can be a pointless nightmare which is an awful thought as I have just ordered a dual core for my daughter and that has already had shipping issues that are making it an extra week late already.
I contacted them but either they are ignorant or just plain stupid.
Just got one of these - Few Problems
Hi all, Just got one of these tabs for my little boy but have a few problems.
1: Wifi is extremely poor, I have a N600 router and everything wifi can use it but this tab can only connect if i am in the room
as the router, then its painfully slow.
2: Does this have bluetooth, Downloaded a hardware tester and it says no bluetooth.
Currently running this
Current rom: fiber_8003-eng 4.1.1 MASTER 20130427
Kernel Version: 3.3.0 [email protected]
Firmware Version: 2.0
Android Version: 4.1.1
Model: A85 Q
I have found a newer rom: fiber_8003-eng 4.1.1 MASTER 20130429, anyone tried it, any improvements on the wifi.
George
Can someone who has already flashed new firmware please give me clear instruction on how to do it as I don't understand the Chinese instruction in the manual and the program is also in Chinese so cant tell what I am pressing.
dinislam said:
Can someone who has already flashed new firmware please give me clear instruction on how to do it as I don't understand the Chinese instruction in the manual and the program is also in Chinese so cant tell what I am pressing.
Click to expand...
Click to collapse
update program, or if you don't find how to dl last version it's in english
AMPE internal storage =0 and can't flash rom
I have a AMPE A85Q quad core android tablet running 4.1.1 os. Recently, I rooted the tablet using Z4Root despite warnings from my anti-virus AVG saying that Z4Root is a Malware. (I have used Z4Root before on another tablet before without problem). After confirming that I have temporarily rooted the tablet, I thought I return the tablet back to the original state by unrooting the tablet. Everything works fine until I shutdown and restarted the tablet the next day. The tablet factory resetted itself and I lost all my downloaded applications. I tried to download applications again, and it just hung. I then noticed the internal storage is zero. I factory reset it again via the tablet Settings, but the internal storage remains as 0.
So I started this journey get my tablet to the original state, after 2 days of research and experimentation on that subject matter, I have made some discoveries. There are many android users out there having this problem, ie, Internal storage is 0.
The solution provided by many experience users, appears to be quite simple, just copy /system/xbin/busybox to /system/bin.
As I could not access / directory, so from my PC, I downloaded Root_Explorer_v2.17.2.apk into my extsd card, and using my tablet File Manager to installed it. All went well. I then discovered my tablet does not have busybox installed. I thought perhaps, I can find a busybox.apk, I can install it via the extsd card. No luck, there is no a such apk.
I decided at this point, I must flash my ROM. On the website, they recommend backing all the data and apps before flashing, but I have already lost everything, and I can't install any new applications, so I can go ahead and flash the rom.
Since I'm doing this for the first time, I read many articles on the web. And, yes, there were users out there who had successfully fixed the problem by flashing the Rom.
My tablet rom version is fiber_8003-eng 4.1.1master 20130517 test-keys .
I found this rar from the AMPE home site.
szampe.com/UploadFile/file/2011-08/0335.rar (525MB)
(Chinese characters quoted from user codQuore posting)
The rar file contains
FOLDER : A8003QD 爱魅 改乐投风格、4K不支持4个窗口播放的软件20130427 (translated = A8003QD love charm happy to vote to change style, 4K does not support 4 Window Play Software 20130427)
------ and contains >>>> aimei_anpei8003_a31s_v2.0_4.1.1_20130429_[1024x768_ctp兼容_双Camera0308_gsensor兼容_ddr360].img
FOLDER : 全志A31升级工具安装 (translated = Allwinner A31 upgrade tool is installed)
------ and contains >>>> 升级指南（A31主控）.doc (translated = Upgrade Guide (A31 Master))
------ and contains >>>> PhoenixUSBPro_Cn_V330_20121204.rar
------ and contains >>>> PhoenixSuitPacket-V1_0003Beta.rar
------ and contains >>>> PhoenixSuitPacket.msi
At the same site, I also found the latest ROM 0381.rar (497.07MB) which has the same release date as my ROM. The rar file contains two folders:
FOLDER : A85?|?? contains aimei_anpei8003_a31s_v2.0_4.1.1_20130517.img (789.09 MB0
and FOLDER : -A31??? (As above the ?s represents chinese characters) contains PhoenixSuitPacket-V1_0003Beta.rar and ????A31???.doc (110.5kb)
PhoenixSuitPacket-V1_0003Beta.rar contains PhoenixSuitPacket.msi (12.33mb)
Why they have a rar file within another rar file, I do not logically understand. Maybe that's the reason, I can't get this part to work. I cannot understand the chinese instructions in the doc file.
If they know the recovery process requires a zip file, you would think it would be sensible to upload zip file rather than rar file. Anyway, I unzipped the files from 0381.rar using RootExplorer and copy the img, doc and msi files into a folder called 1dir. I then zipped the 1dir as 1dir.zip. I have to re-zip the files so that the recovery program can find the zip file.
In the tablet Settings>>Backup & reset>>Recovery Mode, I pressed Reboot into the system in Recovery Mode. Using the volume down key moved to highlighted “apply update from external storage” and select 1dir.zip from extsd.
...On my tablet screen display:
Android system recovery <3e>
Android sdk reversion:exdroid4.1.1_r1-a31-v1.36
Volume up/down to move highlight:
enter button to select.
reboot system now
apply update from ADB
wipe data/factory reset
wipe cache partition
apply update from external storage
apply update from cache
Install /sdcard/1dir …
Finding update package...
Opening update package...
Verifying update package...
Installation aborted.
And it jumps back to
reboot system now
Installations aborted. Hmm. Since I am only flashing for the first time, maybe I did not do something correctly.
. I tried removing the doc file and only zipped the img and msi file.
. Tried the earlier version 0355.rar. Same result.
. Tried wiping the cache partition first before flashing. Same result – installation aborted.
. Tried zipping aimei_anpei8003_a31s_v2.0_4.1.1_20130517.img with RootExplorer. Same result.
HELP,Please.
tunflog said:
I have a AMPE A85Q quad core android tablet running 4.1.1 os. Recently, I rooted the tablet using Z4Root despite warnings from my anti-virus AVG saying that Z4Root is a Malware. (I have used Z4Root before on another tablet before without problem). After confirming that I have temporarily rooted the tablet, I thought I return the tablet back to the original state by unrooting the tablet. Everything works fine until I shutdown and restarted the tablet the next day. The tablet factory resetted itself and I lost all my downloaded applications. I tried to download applications again, and it just hung. I then noticed the internal storage is zero. I factory reset it again via the tablet Settings, but the internal storage remains as 0.
So I started this journey get my tablet to the original state, after 2 days of research and experimentation on that subject matter, I have made some discoveries. There are many android users out there having this problem, ie, Internal storage is 0.
The solution provided by many experience users, appears to be quite simple, just copy /system/xbin/busybox to /system/bin.
As I could not access / directory, so from my PC, I downloaded Root_Explorer_v2.17.2.apk into my extsd card, and using my tablet File Manager to installed it. All went well. I then discovered my tablet does not have busybox installed. I thought perhaps, I can find a busybox.apk, I can install it via the extsd card. No luck, there is no a such apk.
I decided at this point, I must flash my ROM. On the website, they recommend backing all the data and apps before flashing, but I have already lost everything, and I can't install any new applications, so I can go ahead and flash the rom.
Since I'm doing this for the first time, I read many articles on the web. And, yes, there were users out there who had successfully fixed the problem by flashing the Rom.
My tablet rom version is fiber_8003-eng 4.1.1master 20130517 test-keys .
I found this rar from the AMPE home site.
szampe.com/UploadFile/file/2011-08/0335.rar (525MB)
(Chinese characters quoted from user codQuore posting)
The rar file contains
FOLDER : A8003QD 爱魅 改乐投风格、4K不支持4个窗口播放的软件20130427 (translated = A8003QD love charm happy to vote to change style, 4K does not support 4 Window Play Software 20130427)
------ and contains >>>> aimei_anpei8003_a31s_v2.0_4.1.1_20130429_[1024x768_ctp兼容_双Camera0308_gsensor兼容_ddr360].img
FOLDER : 全志A31升级工具安装 (translated = Allwinner A31 upgrade tool is installed)
------ and contains >>>> 升级指南（A31主控）.doc (translated = Upgrade Guide (A31 Master))
------ and contains >>>> PhoenixUSBPro_Cn_V330_20121204.rar
------ and contains >>>> PhoenixSuitPacket-V1_0003Beta.rar
------ and contains >>>> PhoenixSuitPacket.msi
At the same site, I also found the latest ROM 0381.rar (497.07MB) which has the same release date as my ROM. The rar file contains two folders:
FOLDER : A85?|?? contains aimei_anpei8003_a31s_v2.0_4.1.1_20130517.img (789.09 MB0
and FOLDER : -A31??? (As above the ?s represents chinese characters) contains PhoenixSuitPacket-V1_0003Beta.rar and ????A31???.doc (110.5kb)
PhoenixSuitPacket-V1_0003Beta.rar contains PhoenixSuitPacket.msi (12.33mb)
Why they have a rar file within another rar file, I do not logically understand. Maybe that's the reason, I can't get this part to work. I cannot understand the chinese instructions in the doc file.
If they know the recovery process requires a zip file, you would think it would be sensible to upload zip file rather than rar file. Anyway, I unzipped the files from 0381.rar using RootExplorer and copy the img, doc and msi files into a folder called 1dir. I then zipped the 1dir as 1dir.zip. I have to re-zip the files so that the recovery program can find the zip file.
In the tablet Settings>>Backup & reset>>Recovery Mode, I pressed Reboot into the system in Recovery Mode. Using the volume down key moved to highlighted “apply update from external storage” and select 1dir.zip from extsd.
...On my tablet screen display:
Android system recovery <3e>
Android sdk reversion:exdroid4.1.1_r1-a31-v1.36
Volume up/down to move highlight:
enter button to select.
reboot system now
apply update from ADB
wipe data/factory reset
wipe cache partition
apply update from external storage
apply update from cache
Install /sdcard/1dir …
Finding update package...
Opening update package...
Verifying update package...
Installation aborted.
And it jumps back to
reboot system now
Installations aborted. Hmm. Since I am only flashing for the first time, maybe I did not do something correctly.
. I tried removing the doc file and only zipped the img and msi file.
. Tried the earlier version 0355.rar. Same result.
. Tried wiping the cache partition first before flashing. Same result – installation aborted.
. Tried zipping aimei_anpei8003_a31s_v2.0_4.1.1_20130517.img with RootExplorer. Same result.
HELP,Please.
Click to expand...
Click to collapse
Eureka! Fixed.
OK. Before I forget, I better document the fix. The vendor website actually has the img and the tools to flash the rom. Not understanding Chinese user's guide is my problem. Also pictures in the in the instruction shows the use of Livesuit tool instead of PhoenixSuit; this let me needlessly looking for Live Suit software to work with A31. After unzipping the 0381.rar file, there is a img file and a Window installabled msi file, PhoenixSuitPacket.msi. I copied the img and msi files to a directory in my Windows7 PC, and installed PhoenixSuit V1.003Beta. The installation is the tricky bit, because my Windows Installer does not display Chinese Characters. I was desperate enough to click on what I guessed is the "NEXT" button during the installation process. I could read that all installed files were placed in the /program(x86)/Allwinnertech folder. Once installation complete, in the folder there is a pdf file which tells you in Chinese and in pictures, how to use PhoenixSuit to flash the rom. I started PhoenixSuit. There are enough English words and pictures to understand what to do.
I powered up the tablet before connecting the tablet to the PC. The tablet immediately displayed the USB port is connected, and I chose to enable data transfer to storage. At this point, PhoenixSuit also wake up to display the version of firmware, even partially disfunctional, on the tablet. All very positive signs. I proceeded to flash the rom using my img file located in the PC using PhoenixSuit. It took less than 4 minutes, and successfully flashed the rom.
I have rechecked the Internal Storage and it is now displaying 0.99GB instead of 0. Also, Busybox reappears in /system/bin. All good.
Hope this little adventure helps someone out there.
When I'm game enough, I'll tried to re-create the problem. Was it during the rooting process using Z4Root that the problem appears? I will update again when ....
Hello everyone,
I have bought various Android TV boxes in the past, and haven't had problems getting them up and running.
I recently ordered 2 chinese models from eBay however, which are giving me nothing but grief. I apologize in advance for such a loooong post, but I am at my wits end and I am really hoping someone can help me out.
The action was for this model here:
www.ebay.com.au/itm/231275032090
It appeared to be a pretty standard model, like a Justop 4.0, but with a hard switch where the optical should be, and a cut down remote.
Firstly, the Specifications according to the auction:
1GB ddr3
4GB nand flash
Allwinner A20 dual core 1GHz CPU
On closer inspection after receiving the unit, an additional physical difference is that the reset button appears to be between the USB ports, instead of behind the AV out - not a big deal.
After powering it up, I am having huge problems with them.
Firstly though, what the software says about the hardware:
Advanced Settings/About Tablet:
Model Number : BBA22
Android Version : 4.2.2
Firmware Version : V2.0
Kernel Version : 3.4.39 [email protected] #10 Wed May 14 22:36:36 CST 2014
Build Number : BBA22-UI4-V2.0.1
And what Droid Info says about the (relevant)hardware:
Model : BBA22 (sdk-normal)
Manufacturer : unknown
Chipset : sun7i
RIL version : sw-dataonly-ril-0.5
Build Number : BBA22-UI4-V2.0.1
Build Bingerprint : softwinners/ninss/ninss4.2.2/NinssSoftware/20140521:eng/test-keys
OS Version : Jelly Bean MR1 (4.2.2)
SDK : 17
CPU Architecture : ARMv7 Processor rev 4 (v71)
Now, the BIGGEST issue these things have, is that at random points of use, it comes up with a message "Warning - System configuration is inconsistent with the production configuration, please contact your supplier, thank you!". This message will flash over and over again for anything from 30 seconds to half an hour. I half suspect it has tablet code SOMEwhere in it also, as it keeps coming up with 'touch the circle' walkthroughs for applications like avia. This might be unrelated though, I have no idea.
So anyway, I have tried doing the Justop 4.0 flash method with a SD card, however it will not turn on if there is a card in the slot. Also, when you hold the reset button down and power it up, it does not seem to go into the diagnostic mode so I can't flash it that way either. I am guessing the ONLY way I can update short of soldering in a serial port, is to use the backup/restore function.
I read through this whole thread here, but cound not fine anything to help me:
http://forum.xda-developers.com/showthread.php?t=2398632
If anyone has any ideas, please let me know, I seriously can't get anything to work. I thought maybe the 'hotspot' being enabled was causing the incinsistency problem, but I used a process killer to stop that at startup, still no luck. Doing a system reset through advanced config didn't help either, I got the error almost as soon as turning the unit back on.
I've attached pictures of the error I am getting, the top of the board, and the back if the board.
Cheers,
Smak
PS - I am yet to hear back from the seller, but if I ever do, I will post the result here...
Smakky said:
Advanced Settings/About Tablet:
Model Number : BBA22
Android Version : 4.2.2
Firmware Version : V2.0
Kernel Version : 3.4.39 [email protected] #10 Wed May 14 22:36:36 CST 2014
Build Number : BBA22-UI4-V2.0.1
Click to expand...
Click to collapse
I seem to be in a very similar situation. My device also reports as being "BBA22" but it's a different form factor and the identification on the board is "TXCZ_A20_v1.0". I tried contacting the people that made the board (Shenzhen Tianxing Chuangzhan Electronic Co.) but they refused to help. I also tried contacting the company that made the firmware images (Shenzhen NINSS Technology Ltd.) and they also refused. The supplier I bought the device from says they have the image file but they can't seem to figure out how to get it to me (they tried emailing the +200mb file then they gave up and stopped responding). The build number on my device is "BBA22-UI4-V2.0.4" so apparently there's an update available that may work on your device.
I'm pretty sure you need to flash the image using the Phoenixsuit program to make a special sdcard that you place in the device and boot from to reflash the device.
Please post your image file if you ever get it!
tisdall said:
I seem to be in a very similar situation. My device also reports as being "BBA22" but it's a different form factor and the identification on the board is "TXCZ_A20_v1.0". I tried contacting the people that made the board (Shenzhen Tianxing Chuangzhan Electronic Co.) but they refused to help. I also tried contacting the company that made the firmware images (Shenzhen NINSS Technology Ltd.) and they also refused. The supplier I bought the device from says they have the image file but they can't seem to figure out how to get it to me (they tried emailing the +200mb file then they gave up and stopped responding). The build number on my device is "BBA22-UI4-V2.0.4" so apparently there's an update available that may work on your device.
I'm pretty sure you need to flash the image using the Phoenixsuit program to make a special sdcard that you place in the device and boot from to reflash the device.
Please post your image file if you ever get it!
Click to expand...
Click to collapse
That is good to know, I might email them again now. Will let you know the outcome!
OK, so I got a reply from the seller.
I've attached the patch file and the instructions to this message, but theres a few things to note.
- Its only like 20 meg big, so it isnt a full firmware update
- The instructions talk about pressing the reset button at the start.., I don;t think this is neccesary if its rooted already
- The instructions are VERY engrish-y, basically just dump the update.zip onto a sd card, and apply the patch through the settings menu
- The default language is changed to some form of Chinese after applying, theres plenty pictorials on how to change the android language though.
- The version has been updated from BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3 - This is still lower than the one you mentioned @ BBA22-UI4-V2.0.4
So far though, I have re-installed all my apps, and haven't seen the error.. yet. I was a little concerned it is still giving me touchpad tutorials, but mouse mode on the remote is making short work of those.
I'll just have to wait and see, I guess.
Smakky said:
OK, so I got a reply from the seller.
I've attached the patch file and the instructions to this message, but theres a few things to note.
- Its only like 20 meg big, so it isnt a full firmware update
- The instructions talk about pressing the reset button at the start.., I don;t think this is neccesary if its rooted already
- The instructions are VERY engrish-y, basically just dump the update.zip onto a sd card, and apply the patch through the settings menu
- The default language is changed to some form of Chinese after applying, theres plenty pictorials on how to change the android language though.
- The version has been updated from BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3 - This is still lower than the one you mentioned @ BBA22-UI4-V2.0.4
So far though, I have re-installed all my apps, and haven't seen the error.. yet. I was a little concerned it is still giving me touchpad tutorials, but mouse mode on the remote is making short work of those.
I'll just have to wait and see, I guess.
Click to expand...
Click to collapse
That seems very promising for you! Unfortunately it probably won't help me at all... It sounds like it's a sort of update patch instead of a whole image. Starting the device with the reset button causes it to load the recovery partition instead of the regular partition (I'm guessing you saw a green android with a text menu with options for recovery). I full flashing would/could involve an SDcard, but I think you would have to create it with Phoenixsuit and not just copy the file contents over (it would then just boot directly from the SDcard and you wouldn't need to press the reset button).
In my case, both the regular boot partition and the recover partition are wrecked so I couldn't even try this patch if I wanted to.
Thanks for posting, though... Hopefully it helps someone else out.
tisdall said:
That seems very promising for you! Unfortunately it probably won't help me at all... It sounds like it's a sort of update patch instead of a whole image. Starting the device with the reset button causes it to load the recovery partition instead of the regular partition (I'm guessing you saw a green android with a text menu with options for recovery). I full flashing would/could involve an SDcard, but I think you would have to create it with Phoenixsuit and not just copy the file contents over (it would then just boot directly from the SDcard and you wouldn't need to press the reset button).
In my case, both the regular boot partition and the recover partition are wrecked so I couldn't even try this patch if I wanted to.
Thanks for posting, though... Hopefully it helps someone else out.
Click to expand...
Click to collapse
Hmm, is clockworkmod still a thing? I could try taking a backup of my ROM and see if that's something you can use.., only problem is I will need a bit of time. If I get a chance, I'll do it over the weekend. I will need a place to dump the image though, it will be too big to attach here, can sort that out later though.
Smakky said:
Hmm, is clockworkmod still a thing? I could try taking a backup of my ROM and see if that's something you can use.., only problem is I will need a bit of time. If I get a chance, I'll do it over the weekend. I will need a place to dump the image though, it will be too big to attach here, can sort that out later though.
Click to expand...
Click to collapse
I'd appreciate that... Your board seems to have a completely different layout, but all the same components. I'm not familiar with clockworkmod, though, so I'm not sure how that backup would work. I guess I'd need to get clockworkmod flashed on to the recovery partition first and then I could flash the backup to the NAND from there?
tisdall said:
I'd appreciate that... Your board seems to have a completely different layout, but all the same components. I'm not familiar with clockworkmod, though, so I'm not sure how that backup would work. I guess I'd need to get clockworkmod flashed on to the recovery partition first and then I could flash the backup to the NAND from there?
Click to expand...
Click to collapse
I'm not actually too sure. The last timed I used clockworkmod was for flashing a galaxy s2 phone, so I'm not even too sure if its still around or compatible with tv boxes. There will definately be SOME sort of tool though, that can take a full backup suitable for restoring. I'm about at the limit of my knowledge, so I am sort of playing by ear and going into a google-learn-try sort of cycle as I try different things. Maybe someone with more experience will stumble in here and let us know what we need to do
This is interesting... I found another device with an identical PCB board: YBKJ_A20 (I can't post links yet, but a Google search will find it) Several chips are different so the firmware would differ. It's so hard to work with these devices when no one claims credit for making a lot of these things!
What is J4?
http://dl-1.va.us.xda-developers.com/2/9/3/6/8/3/3/DSC_0207s.jpg
I was wondering what the upper left 2 pin connector is for? (the little white 2 pin plug next to the USB)
Is it SPDIF? Power input? output? Something else? I see in this picture a cable connected so i'm hoping you can tell.
Ask BBA22-V.1.50 TV BOX Model Android 4.2 Firmware
Smakky said:
OK, so I got a reply from the seller.
I've attached the patch file and the instructions to this message, but theres a few things to note.
- Its only like 20 meg big, so it isnt a full firmware update
- The instructions talk about pressing the reset button at the start.., I don;t think this is neccesary if its rooted already
- The instructions are VERY engrish-y, basically just dump the update.zip onto a sd card, and apply the patch through the settings menu
- The default language is changed to some form of Chinese after applying, theres plenty pictorials on how to change the android language though.
- The version has been updated from BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3 - This is still lower than the one you mentioned @ BBA22-UI4-V2.0.4
So far though, I have re-installed all my apps, and haven't seen the error.. yet. I was a little concerned it is still giving me touchpad tutorials, but mouse mode on the remote is making short work of those.
I'll just have to wait and see, I guess.
Click to expand...
Click to collapse
Hello
Thank You For This Firmware But It Work For BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3.
My Device Model is ((BBA22-V.1.50)) with Android 4.2 and I had to update it with your firmware file to fix problem black page after boot.
after update my device with your firmware, black page broblem is solved but device not work properly and it show Error message for (android.process.acore) systematically in loop!
also I can not make very actions because this error message show repeatedly.
also the default device language is china and i can not change language (error message show repeatedly)
have you original firmware for ((BBA22-V.1.50)) with Android 4.2 device???
thank you for help me...
H.SHAFAGHI said:
have you original firmware for ((BBA22-V.1.50)) with Android 4.2 device???
Click to expand...
Click to collapse
So... For everyone looking for a full firmware for this box, and stumbled upon this thread from google like I did: DESPAIR NO MORE.
I found a compatible firmware for this device (exacly as described and same board as the one OP has) It will work even if your box came preinstalled with another software version, but its the same hardware
Found it in another thread, posted by @daaviles30 Its not EXACLY the same as the one I had originally loaded but appears to work without any issue whatsoever (even the remote works), if a little bit better.
So here it is:
daaviles30 said:
A20_V20_SDK_EN_XBMC_0703-2.img*491.4 MB
*https:/ /mega.co.nz/#!XAIRiD5Q!aIb0tvvjvzUdaf11vIR7PAadeXPV8XizYJ9X2mAzpQI
RH46-update-a20.zip*582 KB
*https:/ /mega.co.nz/#!HZwTgQIT!LQGxb6R-lCIKe58RgIGROfufY-aq5PODSAq3-NPKOeo
PhoenixCard_V309
*http:/ /mega.co.nz/#F!HAIhBJyS!L_UQPNnYdPyHTD3ggnJ6OA
After flashing update and then go to the play store and download SuperSU update that and your ready to go.
---------- Post added at 03:57 PM ---------- Previous post was at 03:29 PM ----------
Titanium Backup Pro v6.1.5.3.apk*6.2 MB
*https:/ /mega.co.nz/#!vAAWRJga!vOFKlAq_25ssrG5kvwa3-oC-d0saL06YGBIWIyN2jss
You can delete all the unwanted system apps with this app.
Hope this helps Happy New Years.
Click to expand...
Click to collapse
The flashing process is exacly as described earlier in this thread. Use phoenix card to burn the img to an SD card, turn the device on with the card inserted in the slot and enjoy your restored android box.
It Working Only With Booting From Memory Card Slot...
amedeh123 said:
So... For everyone looking for a full firmware for this box, and stumbled upon this thread from google like I did: DESPAIR NO MORE.
I found a compatible firmware for this device (exacly as described and same board as the one OP has) It will work even if your box came preinstalled with another software version, but its the same hardware
Found it in another thread, posted by @daaviles30 Its not EXACLY the same as the one I had originally loaded but appears to work without any issue whatsoever (even the remote works), if a little bit better.
So here it is:
The flashing process is exacly as described earlier in this thread. Use phoenix card to burn the img to an SD card, turn the device on with the card inserted in the slot and enjoy your restored android box.
Click to expand...
Click to collapse
Hello My Friend And Thank You For Replay...
This Android is Working And is Very Good But i Can Not Install This To My Device. I Copy The IMG File To A External Memory Card (Using PhonixCard Application) and put the Memory Card To My Device And PowerOn My Device. My Device Automatically Boot From Memory Card And New Android is Appear. It Is Very Fast And Have No Errors.
Now...
HOW I CAN INSTALL THE IMG FILE TO MY DEVICE (INTERNAL MEMORY) AND BOOT MY DEVICE WITHOUT USING MEMORY CARD (FOR ALL TIMES)???
H.SHAFAGHI said:
Hello My Friend And Thank You For Replay...
This Android is Working And is Very Good But i Can Not Install This To My Device. I Copy The IMG File To A External Memory Card (Using PhonixCard Application) and put the Memory Card To My Device And PowerOn My Device. My Device Automatically Boot From Memory Card And New Android is Appear. It Is Very Fast And Have No Errors.
Now...
HOW I CAN INSTALL THE IMG FILE TO MY DEVICE (INTERNAL MEMORY) AND BOOT MY DEVICE WITHOUT USING MEMORY CARD (FOR ALL TIMES)???
Click to expand...
Click to collapse
Wow.
The Phoenixsuite makes an sdcard that flashes the internal memory. After it's finished flashing, you take the card out and it runs off of the internal NAND. That's it. It never runs the Android from the sdcard.
My device can boot from sd-card!!! I need to flash this to install your android!
tisdall said:
Wow.
The Phoenixsuite makes an sdcard that flashes the internal memory. After it's finished flashing, you take the card out and it runs off of the internal NAND. That's it. It never runs the Android from the sdcard.
Click to expand...
Click to collapse
Hello My Friend And Thank You For Replay...
1- My Device Can Boot From SD-CARD With A Bootable Memory Card! (Such As OpenSuse Linux)
2- I Use PhonixCard Application That You Send.
(PhoenixCard_V309
*http:/ /mega.co.nz/#F!HAIhBJyS!L_UQPNnYdPyHTD3ggnJ6OA
3- I Can Not Use PhonixSuit Application And I Don't Know How To Use PhonixSuit. When I Connect My Device To My Computer To Use PhonixSuit, My Computer Don't Find Any Hardware And Can Not Connect!
4- I Copy The IMG File To A SD-CARD (Using PhonixCard Application) and put the Memory Card To My Device And PowerOn My Device. My Device Automatically Boot From Memory Card And New Android is Appear. If Unplug The SD-CARD And Power On My Device, Old Android Is Appear!!! Master Android Software Is In My Device And I Need To Clear This From My Device And Install Your Android!
HOW I CAN INSTALL YOUR ANDROID TO MY DEVICE (INTERNAL MEMORY) AND BOOT MY DEVICE WITHOUT USING MEMORY CARD???
I need help!!!!
no any answer???