Database Info

[Q] Samsung Galaxy S GT I-9008 in China. No Android market application !

Hello,
just got a Samsung Galaxy S in China (under the name of samsung GT-I9008) and use it with China Telecom as the carrier/operator
Specs as follows
Model Name : GT-I9008
Hardware version : 1.0
Firmware version : Ophone OS 2.0
Kernel : 2.6.29 Zeus 1
To my biggest disappointment, the phone doesnt come with Android market but with the Mobile phone operator own device called MM ( Mobile Market) which is only in Chinese !! and very limited in terms of applications you could download.
Is there any way I could install instead Android Market ?
Many thanks in advance for your reply
Christophe

I have the same problem in middle east.
Any help please.

I helped a friend with the same phone. Basically do the following:
1. Download and install z4root
2. Download the Cyanogenmod Google Apps (EPE54B)
3. Open up the update.zip file and get Vending.apk out of \system\app\ and copy to SD card using UMS mode.
4. Use File Explorer on the phone to copy the file from /sdcard to /data/app
5. Reboot

Any luck installing Google Apps on i9008 (Samsung Galaxy S for TD-SCDMA)?
Guys,
I followed the instructions posted on this thread and other sites, to help a friend who recently bought this phone. Successfully rooted the phone. Installed the Google Apps as instructed, but they all are malfunctioning to the point of being unusable.
- Gmail - only works OK with one account, will not allow extra accounts
- Google Maps - zooming does not function
- YouTube - does not even start
- Market - gets stuck at 0% download point for any downloaded apps
If someone managed to install any (or all of these) Google Apps on their i9008, I would be grateful for instructions on how to properly install.
thanks!!

I installed after updating the official ROM to the latest version. This is 2.1 eclair rather than 2.0 based so may explain why it doesn't work for some people. In that case, using the cyanogenmod 4 gapps files may work.
Another possibility is that not all files were copied from the extracted update.zip to the relevant places under /system (yes, it is /system, not /data as I mentioned in my last post)
These would be /system/app, /system/framework etc.
I daresay that you'll need to copy all files from the folders in update.zip over to the right places. I had to delete some of the Chinese apps to make space for all gapps.
Tell me if it works for you. Cheers.

Hi ,
thanks for your input! As I am not at all an expert on technical stuff and do not want to have my phone no longer working, please let me recap :
- I have downloaded the file z4root.1.3.0.apk --> then i have to install it on my SD card and launch the application?
- Checked to download the "Cyanogenmod Google Apps (EPE54B) and it appears on ur link that there are dozens of different files according to phone models but none for the Samsung GT I-9008. Kindly let me know which one to consider.
Did your friend with the same phone eventually managed to have all google apps including the english android market by doing such installation?
Again, the specs of my phone are :
Model Name : GT-I9008
Hardware version : 1.0
Firmware version : Ophone OS 2.0
Much appreciate your help !
Best
Christophe

Yes, we did manage to get the English market (and many Google apps) running properly.
With zroot, install then run it, choose the permanent root option. It'll reboot the phone to finish the rooting.
The gapps version you need to download is listed in the Cyanogenmod 5 row (android 2.1 or eclair based) and is under the HDPI column (means high dots per inch, or just a high resolution display as the i9008 has). Any of the links in that entry should be fine if they work.
I have realised that in my last post, I mentioned copying to /system/app. This is not possible unless you do the following:
Get http://androidterm.googlecode.com/files/Term.apk install same way as zroot.
Run it then type:
su
mount -o remount,rw /system
Quit out of it then copy the extracted contents of update.zip to the corresponding directories under /system using file explorer.

Same thing happened to me w/
Model Name : GT-I9008
Hardware version : 1.0
Firmware version : Ophone OS 2.0
I had to follow the instructions above

thanks for your input..
Is your phone also operated by China Mobile ? was told that it was not possible to root the GT I-9008 being operated by China Mobile.
Anyhow, will try and follow above process.

Well I have watched an interview for Galaxy S2 and they showed a new technology in it...And told that they are challenging the Android market as Android challenged the Iphone...

How about this? Any news?

Hi, now I need some help...
I playing with my China Mobile I9008 yesterday, and as I trying without sucess to find a way to install the market, I think I installed a wrong version of clockworkmod, now my I9008 is bricked (I think). Its starts but after first screen (where's appears I9008 name and so on) the boot come back to ophone screen and keep in this looping more than 20 times... full wipe and others doesn't work
In my mind if I apply again the update.zip can solve, but my file having problems showing erros, can not read the file, etc...
I tryed to find this file but I have no success...
Someone can help me? have some update.zip to my i9008ZMJI1 firmware version?
Thanks.

Install factory image
Ok, I've been trying to find a way to install CM (and the market app) onto my GT-I9008L and have managed to nearly brick my phone a number of times. The only thing I have succeeded in is rooting my phone (use Z4root) and installing a fresh factory image.
(I apologize for broken links, XDA doesn't trust me to post clickable links yet)
To install a fresh factory image:
a) Get the software from this Chinese thread: bbs.dkdiy.net/thread-12788-1-1.html
--The first message in the thread has a link to a RAR file that contains everything you need. Including all the tools & the image itself
--To see the link you'll have to create an account and post to the thread
--I was able to do it by using a combination of google chrome and google translate to work my through the free registration process.
b) run Odin v1.81 (I've tried other versions of Odin...they don't work)
c) select the files shown in this image: www .dkdiy.net/article.asp?id=633
d) the file versions in the image don't match the RAR file. The key is put the CSC file into the CSC blank, the CP file in the "phone" blank, the "all low" file into the PDA blank and the PIT file into the PIT blank
e) make sure you have selected the checkboxes in the image
f) start your phone by holding volume-down+home+power
g) when you see the yellow android digging plug your phone into your computer (you may need the samsung drivers)
h) wait for odin to detect your phone (the first box under ID:COM will turn yellow and list the com-port that your phone is connected to)
i) hit start, wait about 3 minutes, you will see the progress bar update every 5-10 seconds
j) it will auto reboot and finish the installation
To root your phone I followed the instructions on this chinese thread (use google chrome to get an instant translation):
ibbs.91.com/thread-53590-1-1. html

DUDE!!!
I think i got some good news.
I have the same problem with my new S2 bought in China, no Android market. I've been searching all around the web to try to fix it.
It is still not working for me, but i got a little bit farther though.
I find the hint here
http://forum.xda-developers.com/showthread.php?t=1351283
So what i did and what you can try is:
1) Install GoogleServicesFramework.apk
This seems to be the issue, as when you install it you can see the permissions Google requires, and pretty much says the can access ALL the data in your phone. (It would explain the censorship)
2) Install Android Market with any .apk you can find
3) Launch Android Market
The change for me is i can now input my account login. But it still fails connecting to google to actually login. Maybe because i'm still in china and it blocks the connection.
Could any one try this outside china and tell me if it works?
Cheers
EDIT:
By connecting my APN and Wifi (instead of wifi alone) i managed to finally loggin. I HOW NOW ACCESS TO ANDROID MARKET !!!
But not so fast. I have access to the market, but i get an error when downloading an app. So it is still not working, but getting closer. I sent an e-mail to google see if they can fix this (seems my account and my device are still not linked). Waiting for the reply...

Alright it's working now !!!
After exchanging a couple e-mail with google, i managed to download some apps.
I've been testing it for a couple hours now, works like a charm.

[ROM]DocHoppyRom NEXTBOOK 7 Premium*updated DocHoppyRom Full On Rootv2.0*2/14/2012

I was working on a ICS based hoppy rom. Unfortunately I just had a catastrophic screen failure, apparently when my laptop bag fell last night, it landed with enough force to shatter the screen on my nextbook! Oh well. it may be a while before I can work on anything to further the version I was working on.
FYI- Due to work, my time is very limited for working on the next version of Hoppy Rom. I apologize in advance. The company I work for is
setting up new engine test cells in China, and my self and 2 other people are main points of support! again Sorry for anything new taking so long!
DOCHOPPY HAS BEEN SIGHTED (Other than on a DAYZ server...Stay tuned.
Ok I have decided to pass along what I have been working on.
Warning***
This is for the Nextbook 7 premium ONLY!
Known working on Nextbook 7 premium tablets with serial numbers starting:YF1011
DocHoppy Presents!
DocHoppyRom Full On Root v2.0
and
DocHoppy Cramfs Style 3.0
Based off the official update image released by nextbook.
Major thanks to FINLESS BOB!!! GREAT HELPFUL GUY!
PRESENTING DOC HOPPY ROM
CRAMFS STYLE 3.0
AND
FULL ON ROOT v2.0
Disclaimer: I am not responsible for Bricked Tablets. This is known to work on tablet with SN starting with YF1011, and some YF1211.
First you will need to decide which version of the Rom you are going to load. The CRAMFS Style version has SU but you CANNOT write to the /system directory. This is a good all around Rom for those who may need SU but do not need to write to /system.
Full On Root is just that, you have full read write to the /system and can customize the Rom to your hreats content.
HOW TO INSTALL:
TO FLASH CRAMFS STYLE 3.0 Put the UPDATE.IMG file from the Cramfstyle Folder onto your SD card, while tablet is on and follow the on screen instructions.
After running the self extracting Zip file you will have a directory containing the following folders and files.
Drivers (folder)
CramfsStyle(folder)
FullonRoot(folder)
Log(folder)
Language(folder)
Readmefirst.txt
Rkusb.log
RkusbComm.dll
Setting.ini
RK29update.exe
TO FLASH CRAMFS STYLE 3.0 Put the UPDATE.IMG file from the Cramfstyle Folder onto your SD card, while tablet is on and follow the on screen instructions.
To flash Full On ROOT, Plug your nextbook into your PC via usb cable. Turn your nextbook over and with a safety pin or something of similar size, press and hold the reset button for 2 to 3 seconds.
Run the RK29update.exe
Select your Rom files via the boxes containing the .... And navigate to the correct directory for the rom you want to install.
Insert eache file in order according to the update tool.
Clear IDB. (this is like a lowlevel format for the Rom tool:
After the Tool says OK. Select Run. This will begin to load the Rom onto your tablet. It will go through loading and then checking the Rom install.
After the Rom loads and the tool comes back with an OK, patiently wait for the tablet to reboot, and load the new ROM. If the tablet is still connected to the pc via USB when the rom boots it will show the screen allowing you to select weather or not to turn on USB storage. Press the home key and you will be given a choice of Golauncher or Rklauncher. (go lock is a screen lock program.)
Enjoy the Rom!
Disclaimer: I am not responsible for Bricked Tablets. This is known to work on tablet with SN starting with YF1011, and some YF1211.
Features for both Roms:
Complete and correctly working market. It now correctly associates the tablet to your gmail account allowing purchases from market.
Launcher 3.0 as well as Go launcher ex. Launcher 3.0 was pulled from an rk2918 firmware3.0 update and put into this rom.
Google Calendar is now back and working correctly.
Original Email is back and working correctly.
Included Kindle App
Included Estrongs file explorer.
Both have SU though the Cramfs version cannot write to SW.
Removed Apps Added in last release and return to more of a original rom state.
Rom is pretty clean. And seems speedy.
Cramfs Style 3.0 Rom has 200mb internal Ram +/-
Full On Root 2.0 has 894MB of Free Internal Ram.
Cheers!
DocHoppy
www.freaktab.com
Keep in mind this is the first version of this ROM. There will be updates and changes made.
FUTURE CHANGES:
Custom Theme Changes.
More Tweaks to the system.
Long Term Wants:
Power Menu change to include recovery boot.
Power Menu change to include restart.
This is a work in progress.
Known working on Nextbook 7 premium tablets with serial numbers starting:YF1011
Linked here for image.
Non Add Showing Link.
DocHoppyFullOnRoot2.0
New Cramfs style Rom is still Available Here.
DocHoppyCramfsstyle3.0
To install DocHoppyRomv3.0, rename .img file to update.img, download update.img file, copy to SD card, and follow the prompt.
DocHoppyCramfsstyle3.0
Enjoy.
Disclaimer:
Not responsible for bricked tablets.
Enjoy!
Also visit www.freaktab.com

So freaking sweet, great work on RW!

I used Wendal's tool to decompress the cramfs file system.
As for the /system, Because the device uses cramfs, and based on everything I have read, using Wendal's tool to decompress the file system, make the changes, and compress is the only way I can see to be able to
customize the rom for the device. The image is rooted, but after the update.img is compressed, the /system file remains read only. I tested this using root explorer, but anything requiring su works fine. But all hope may not be lost, I was reading on a chumby forum someone suggested using mkfs.jffs to make it writable, but further down it notes that you would need to change the kernel (easy enough to recompile I think), to utilize a different file system. The boot loader would also need to be modified, something I am not ready to try and tackle just yet, I think I would be bricking my nextbook pretty quickly.
It is a start and I am actually learning a lot as I go.
Any thoughts or suggestions are welcome.

I am definitely a long time user / cyanogenmod / aosp fan, but as far as ripping open .img files its definitely new territory, I tried to find an internal SD card like the nook has, to maybe dump it, but I cannot find such a beast. Any progress you make is awesome. So do things like root explorer work, just not on /system due to cramfs?

Correct, root explorer does work, but due to cramfs, it does not allow you to toggle to rw from ro on the /system.
Working on taking apart apk's and customizing and rebuilding and resigning next.

just flashed this rom and it works great!
How would I go about doing a custom boot animation or image?
... even if it means flashing a new rom from clean?

This is great. Thanks. The only question I have is why do I see so few items in Market? Does it have anyhting to do with compatability?

Calendar & Sync Access
First, thank you for your work.
Before I update by Next7P, have you included Google Calendar and Sync access in this update?
I use MyPhoneExplorer and will need calendar sync to work so I can fully use for business.
Thanks.
There is another method to get Google Market on the Next7P, I am a new user so I can not post the link, but google , forums Whirlpool net au archive 1756859
, very easy and works great, but cannot get sync to work.
Dan,

Thanks for the responses!
sgtfoo : You can use Wendal's rk29xx tool to take a copy of my rom image, or the original update downloadable from nextbookusa.com, and
unpack it. You then have access to the system directory in an editable format. you can go into the system folder /system/media and replace the bootanimation.zip file with another one. Just be sure the image format is 480x 800 and that the zip file has 0% compression ratio. After you make the changes, just repack .img file via Wendal's tool and reflash.
dodoclub : Not sure why. I have a full market. You might try clearing the data and cache for the market. My market shows pretty full, I.E. I got 31050 entries when I searched for facebook in the market.
Danno65: Actually that is something I have been working on. I can get my google calendar to sync, currently I am using a calendar from the market called Jorte, which works great, how ever, googles actual calendar.apk closes unexpectedly, I am thinking it is just a version problem with the calendar, but haven't had a lot of time to follow up on it.
FYI here is the link to Wendal's tool, which makes it much easier to work on the update.img file.
https://docs.google.com/leaf?id=0B8hUXYDeoy_hNTc1YTVkYTMtNTNjZS00YjI2LTgyNDYtYjRjZjFmODdiZTQ1&pli=1
Cheers!
If you have any request or questions please feel free to ask, I will help anyway I can.

Thanks Dochoppy
Got one of these tablets for Christmass to replace an old broken tablet I use for work.
Google hosts our work email, so I still need to get Contacts and Appointments going, but I maybe able to side load them.
Noticed build.prop still has ro.secure=1. This prevents adb from having root access??

Calendar & Sync Access
DocHoppy,
I came across a post where the "Calendar.apk" and "CalendarProvider.apk" files must be in the "system/app" directory to work properly, I tried to copy these files to the above directory but found it to be read/only, will wendalls tool have to be used to get access to the directory?
Also, did you get your google calendars on your desktop to sync with Jorte on the Next7P, I tried but no luck.
Thanks
Dan
The updated image file worked great, thanks again

Thank you so much for your work in building a new rom for this thing. I am anxiously awaiting a new filesystem so we can have true root. How do we manage to recompile the kernel for ext4 support and change the /system fs?

Hello, first of all, thanks for your work!
I am having trouble loading this rom. it says there's an invalid image file in my sd card and if I want to delete.
Now, I don't know if my tablet is a never or older version of what you guys have...
Next7p
2.3.1
kernel: 2.6.32.27
build: v2.0.7.....
my serial is also different from alot..it starts with YF0511
any help or tips?

markmatters said:
Hello, first of all, thanks for your work!
I am having trouble loading this rom. it says there's an invalid image file in my sd card and if I want to delete.
Now, I don't know if my tablet is a never or older version of what you guys have...
Next7p
2.3.1
kernel: 2.6.32.27
build: v2.0.7.....
my serial is also different from alot..it starts with YF0511
any help or tips?
Click to expand...
Click to collapse
I would say the serial number would have something to do with it, check on the site for nextbook and see if your serial is in the same *batch* as ours, if the original serial is in a different group, im assuming the hardware may be slightly different? If so, you can always use his method to repack the original with root.

First off I would like to say that I was very pleased when I came across this thread from another one. I haven't flashed this ROM yet, but plan to. Thank you for your work on this as I have been searching the whole internet since I got this thing [4 weeks now] for some sort of custom ROM. It is hard to use this tablet when I have ICS on my Captivate and Vibrant. GB just isn't as cool.
One thing I hope we can work on is root access, so we then can use Titanium Backup. Then we won't have to manually reload everything when new releases come out.
With all that being said, if there is anything I can do to help, I would love to. Like I said, I plan on flashing this probably tomorrow or Tuesday. Thanks again.

For the record, I got titanium backup working fine on this rooted rom. it is capable. You just need to reboot after it restores a backup.

i'm new to android. glad to see rooted rom finally, keep it up!!!
i have a clarification, any improvement in the booting time? my device took 1min30sec (power ON to ready to use, for me, 90sec seem like not fast enough).

Good luck on improving boot time. And besides a tablet is best used when on all the time... try using the suspend state to quickly wake it. We're just starting with the early versions of this rom... give it time to grow.
Sent from my N7p using XDA App

Build.prop editing
Okay so observation:
Our tablet is not recognized as a "tablet" by the Android market, only and android device.
What prop would I have to edit in order to have us recognized as I tablet. I noticed this when:
I finally managed (through some internet tutorial before this rom) get the market working (the first version, not 3.1+). And when I downloaded apps (I'll use Minecraft Pro as an example) I noticed that the way mine looked and the way the tablet version looked via android market photos and Youtube, ours looks like an enlarged phone version rather than a tablet optimized version. What can I edit to fix this?

Flashed this today... so for it works great. Love the new boot animation. Great work and can not wait for future releases!
Sent from my Nextbook Premium 7 (Doc Hoppy's Rom v02) from the XDA app.
---------- Post added at 12:16 PM ---------- Previous post was at 12:03 PM ----------
One thing that would be great on a future release [not sure if it is possible yet with out r/w], would be a bigger data partition for apps. Moving everything large to the SD is ok, just takes longer to boot those apps. A kernel that would allow voltage control app [like CPU Master] to work also. Just a thought!

Haipai Noble i9220 5.2 inch MTK6575 Android 4.0 Firmware, Custom ROMs!

This thread is only for Haipai I9220
Star N8000 Official Thread: http://forum.xda-developers.com/showthread.php?t=1695210
Hapai X710D MTK6577 Official Thread: http://forum.xda-developers.com/showthread.php?t=1847136
WARNING: You do it with own risk ! I don't responsible for any damage to your phone.
Thread logs ( New ! ):
*** On 1 September 2012 *** Rearrange the thread to make it easier to read and follow
*UPDATE 1* Here is my 4Shared folder: Haipai I9220 MTK6575 which is including: vold.fstab, Mtk6575 USB Driver, latest flashing tool and the firmware as well as a root file FOR HAIPAI I9220 ONLY. Hope this help
How to root: All credits to Bthoven and download links are brought to you by zBeYuz
1.Please download root file from the link above.
2.Go to settings-developer options-click USB debugging.
3.Connect the phone with computer,turn on usb device.
4.Click the file you download from the link TPSparkyRoot.bat
5.Your phone will restart first time,after the phone start finish(until you see the unlock),click enter in the window of TPSparkyRoot.bat.
6.The phone will restart second time,still the same as first time we did.Then start third time,same as we did in last two times.Click enter then phone was rooted.
7.You will see two more app was installed in your phone that means root phone successfully.
After successfully rooted, it will install root explorer.apk Chinese version which is rather useless for installing Market because it's all in Chinese. Thus, you need to download this "ES File Explorer" in order to put Google Play into the system folder. People who have a problem when installing Google Play by using apk, for example: Error processing purchase [DF-BPA-13]
Here is how to install a new and working Google Play Store:
1. Download "Vending.apk" from the same mediafire folder above.
2. Copy Vending.apk to \system\app\ folder in your phone by using ES File Explorer in root explorer mode with system file mounted.
3. Change permission of Vending.apk to Read/Write for Owner; Read for others (rw-r--r--)
4. Shutdown your phone.
5. Switch on your phone, you will see Google Play Store app, and Enjoy !
*UPDATE 2* Here is a custom firmware ( most of functions are working and rooted ) , all credits to yiminghung and angelobiz, as usual general instruction and faster links are brought to you by zBeYuz
0. How To Flash Haipai Noble I9220 Firmware On YouTube By Angelobiz
1. Before upgrade to this firmware, remember to backup all your apps using My Backup or Titanium Backup so that we can restore those apps later.
Download ADB driver if you have not installed it ( Tested on Windows 7 )
You must have debug usb active in your phone. this driver need for use adb command example for root script or use MTP function.
2. Download firmware + flashing tool + drivers from here: May 7 Firmware With New System.img
OR Only Driver For Haipai I9220: Drivers
3. Unrar the firmware, turn off your phone and take the out battery, then plug the phone into your PC.
4. Install the driver from the firmware folder that you unrar before, then plug out the phone.
5. a) Go to Flashtool folder and run SPMultiPortFlashDownloadProject.exe
b) Choose Factory Database --> Setup data source file: "MTK_DATABASE.mdb"
c) Choose File --> Open download agent file: "MTK_AllInOne_DA.bin"
d) Choose Scatter File: "MT6575_Android_scatter_emmc.txt" in Firmware folder.
e) Choose the figure same as the picture: SmartPhone MPD.jpg, which can be found in Firmware folder.
6. Make sure the phone turned off and the battery was taken out. Click Start All and plug your phone into the PC then wait about 5-10 minutes for the flashing process to finish ( Write OK ! ).
7. After it is done, we are good to change the IMEI. However, before that try to turn on the phone to see whether the phone is working or not.
8. If everything is ok, excepted IMEI was missing, download IMEI Changer Tool from here: IMEI Changer For Mtk6575
9. Unrar, install the program and run SN_STATION, which can be found on your desktop. Follow the instruction in the Chinese manual, but we only need to follow the picture in that manual.
The file "Modem Database" and "AP Database" is in firmware folder. You need to choose exactly the file that you see in the picture.
10. Write down two IMEIs on the back of your phone ( you need to take the battery out to see it ).
11. Again turn off your phone and take the battery out, then plug the phone into your PC, but this time we need to put the battery back in very quickly as soon as we see:
"COM port searching and preloader handshake ok" on SN Writer Log.
11. Wait until "Write Result Indicator" becomes green, then the IMEI has changed successfully.
OR you can try to change your IMEIs by using ZOPO IMEI ( Thanks to colouriste )
1. REMOVE SIM CARD(S) FIRST !
2. Check "Dual Imei"
3. Type in original IMEI #'s 1 & 2 and then
4. Click "Write"
Enjoy the new firmware with GPS working, wifi improved, front camera working, beautiful font and more...
2-1) Here a online translation of custom recovery in English: ( Thanks to angelobiz )
http://tabletrepublic.com/forum/cortex-a9-ti-omap-4/smartq-clockworkmod-recovery-menu-%5Btranslated%5D-2037.ht-l
2-2) Haipai i9220 Data to 2.5gb ( UPDATED ! )
? What is it ? 2.5gb data means never again out of storage for apps. You lose "internal sdcard". Only useful if you have hardware sdcard
http://www.mediafire.com/?8n1u8n72180iggd
*UPDATE 3* ( Quote from angelobiz. Thanks a lot for your hard work, Angelo. You are rock !!! )
"Now we have all we need for make a firmware without bug!!!
Thanks to Johnny Hung from Taiwan for fix network location and Google Apps
Thanks to Resquer from Russia for English Recovery
Thanks to Chinese man that make a script for root
Thanks to me from Italy for collect all this information
Thanks to all that i no remember from World ( by XDA and Iphone.ru)
a very example of International Cooperation...
If our governments do the same ... the world would be better !
Change log:
Google Apps
Network Location
GPS
2gb of ram for data
Custom Recovery CWM in English
Full Stock Firmw!re (boot, preloaded, modem etc etc...)
Change Imei
After i find a script for remove ads form app: It is working!!! youkneed replace with original file.
"Beats Audio" I have installed it with custom recovery... but no there is any apps to use it...only when you play music, you have difference... but i don't like play music so i don't know if make a difference.... you try it!!
Only 1 bug have our phone.. but i thinks that it is a hardware bug, so we cannot solve with upgrade a firmware:
"Wireless signal isn't very high"
Download:
Angelobiz's folder
Install:
Please refer to Update 2 - Step 1 to 6 on how to flash a new firmware
*UPDATE 4* ( Quote from angelobiz. Thanks a lot for your hard work )
"New ROM by AngeloBiz, based on kernel of 5 June.
If something doesn't work, you can restore your phone with stock firmware
Make a backup of your data or apps with Titanium Backup or same apps. The flash erase all your data, and the nandroid backup won't work if it is of previous kernel ( in my phone don't work anymore 3G, after restore of data nan-droid backup of 14 May kernel)
Change log:
Kernel 05 June
Root Enabled
Change logo battery, now with %
change host file, no ADS .-)
rename com.Google.android.features.vendor.xml
change logo.bin, boot logo and boot animation (no brands)
add some sounds
add some useful apps
no Chinese apps
Repartition Fix (you will have: Internal memory 2gb, SD1 external sd, SD2 512mb)
Backup and restore work only with this version of kernel
Download:
Stock Firmware of 5 June
http://www.mediafire.com/?e2f9h8bfb1f66
Angelobiz v.2.0 Update.zip
http://www.mediafire.com/?o9d7g9c9xurk3
Install:
Download stock firmware of 5 June:
You must flash all firmware !!!
Start your phone
Copy the update.zip in your sd card.
Go in the recovery mode:
With phone off, you hold volume + and power together.
Go to "install zip from sdcard"
Go to "choose zip from sdcard"
Choose right update.zip
Apply
Wait...... Wait....
Reboot your phone"
If you are stuck at Booting Screen, please try those tips below ( For UPDATE 4 Only ): by zBeYuz :laugh:
1. Did you forget to extract your system.zip in firmware stock 05 June folder ?
I just found out earlier that I totally forgot about it .
Just extract that file you will get system.bin then delete system.zip and start to flash the firmware normally. ( Booting up will take about 3-5 minutes after it is done ).
If the phone is still stuck please consider the next step...
2. One more thing to take note, I am using different flash tool from angelobiz:
You can refer how to flash with this flash tool here:
0. Driver must be installed: http://www.4shared.com/rar/9onOaDl5/Driver_New.html? ( Please refer to UPDATE 2 for more details )
1. Download Only Flash Tool: http://www.4shared.com/rar/v8txho3k/Flashing_Tool.html?
2. a) Go to Flash tool folder and run SPMultiPortFlashDownloadProject.exe
b) Choose Factory Database --> Setup data source file: "MTK_DATABASE.mdb"
c) Choose File --> Open download agent file: "MTK_AllInOne_DA.bin"
d) Choose Scatter File: "MT6575_Android_scatter_emmc.txt" in Firmware folder.
e) Choose the figure same as the picture (Setting f/r SmartPhone MPD.jpg), which can be found in Firmware folder.
3. Make sure the phone turned off and the battery was taken out. Plug the phone into the PC and wait about 5-10 minutes for the flashing process to finish ( When you see it becomes green and states that "Write OK" ).
*UPDATE 5* ( Quote from angelobiz )
Change log: Thanks to Johnny !!!
You can choose re-partition fix that you want ( Please download from folder 2 below either 2.5GB or 2GB Fix ).
Now data restore from nandroid backup work with new recovery.img !!!!
You can flash 2.5gb re-partition fix now !! It hasn't had bugs now !!!
New launcher and new icons
Root Inside
Host updated for no ads
Beats Audio inside for better sound
News useful apps
Minor bug fix
Change battery icon
Download:
1 - 19 June Firmware ( Download all the files in this folder and put all in one place - remember to extact system.rar )
Re-uploaded: preloader_e1809c_v75_lx528_sx
http://www.4shared.com/file/NsworLYX/preloader_e1809c_v75_lx528_sx.html
Re-uploaded: uboot_e1809c_v75_lx528_sx
http://www.4shared.com/file/1cAAxMvd/uboot_e1809c_v75_lx528_sx.html
2 - Angelobiz 3.2 Update ( 3 Files ) + New Recovery.img + Re-partition Fixes ( 2 Files ) ( For a new recovery.img, put it inside the 19 June Firmware and flash as normal )
Install:
- If you have old firmware before 19 June, you must flash all firmware of 19 June ( Please refer to Update 2 - Step 1 to 6 on how to flash a new firmware )
After you have 19 June firmware, then copy Angelobiz 3.2 update.zip on your SD , start in CWM recovery ( Hold Volume + and Power button together ) then launch Angelobiz 3.2 update.zip
- If you have 19 June Firmware with CWM:
copy update.zip on your SD , start in CWM recovery, and launch Angelobiz 3.2 update.zip
- If you have 4 or 5 June firmware with CWM
copy Angelobiz 3.2 update.zip on your SD , start in CWM recovery, and launch Angelobiz 3.2 update.zip
Tips + Tricks:
1. Thanks mikeysteele: "One thing I noticed after installing Set CPU is the kernel defaults to the Performance Governor. This means the CPU is always running at the maximum frequency so that might explain the poor battery life. I changed it to the On Demand governor and my battery life has improved."
2-a. Thanks angelobiz: For remove old, hidden driver you can see this: http://www.tech-recipes.com/rx/504/how-to-uninstall-hidden-devices-drivers-and-services/
2-b. Thanks caviar44: This is a tool to remove old drivers: USBDeview v2.11. Just right click on driver instance and then choose "uninstall selected devices".
3. Moborobo - The Android Smartphone PC Manager ( You can use it to install apps, make a backup, blah blah ) : Moborobo
4. For people who want to have better WiFi signal please refer to those picture as it show how to make some changes to the phone antenna. Antenna
Good Luck~
Thank me if you think you can
FIGHTING !!!

Hi I would like to update some information about this phone,
1. The resolution of the screen is 800x480.
2. The original battery with 2800mAH capacity is so so, normal usage about 1 -2 days. On the battery stated that the cell made in Japan, yet finished in China.
3. The phone comes with the case with Samsung logo on it, together with a screen protector (not really good).
4. Additional infomation:
a) The front camera is on the left hand side, which is quite bad, because the Galaxy Note's is on the right side.
b) 3.5mm audio port is very depth, I have no idea why, so normal headphone or earphone like Beats Monster,for example, will be loose. But we still can use the one comes with the phone.
c) Camera is 8Mp and the picture looks quite nice if there is enough light.
d) It runs very smooth without any issues.
e) There is no touch pen.
f) Android 4.0.3 without Google Play or Market, Youtube, Google Map.
g) The camera sometime has a noise, like tac tac, when the apps need to use it ?!
At the end ? I still like it and I will try to update other good and bad points later if I can find any
*Update on 17/05/12*
h) After a long usage, the phone using original rom sometime can't rotate the screen even the "auto rotate option" was on.
--> Solution: Remove the battery and put in back in 30s, the phone will be functional as normal.

There is no way to root mtk6575 phone ? Anybody please help ?

zbeyuz said:
There is no way to root mtk6575 phone ? Anybody please help ?
Click to expand...
Click to collapse
Yes, you can.
Mine is i9220+ model, ICS. I got a root script from my vendor. Very easy to root.

I bet its not qhd and the battery mah?
Sent from my HTC HD7 Pro/+ using Tapatalk 2

bthoven said:
Yes, you can.
Mine is i9220+ model, ICS. I got a root script from my vendor. Very easy to root.
Click to expand...
Click to collapse
Please share this with us!
I received this same device today. It is not dual core, see: http://dualsim-smartphone.com/img/smartphone/i9220_mtk6575_dualsim_8.jpg
If any vendor claims it is so, what they are referring to is that it has both a 'normal' cpu plus a graphics chip. This is normal and its not the same as dual core!
Neither is the display qHD, as that would be 960x540. This device is 800x480. The display is... mediocre. I don't find the low density to be an issue, but a grainy texture is visible on light areas, e.g. the background in the Messaging app. Colour accuracy is also pretty bad: you get what you pay for.
FWIW I arrived here by googling DF-BPA-13 as I have the same issue. My temporary solution is to load apks onto the microsd on my old phone, then install those through "File Manager"

Thank you, guys. I will update my post above.
Btw, Does anybody hear anything about customised and rooted rom for this phone ?
To richardkemp, can you teach me how to recognize a dual-core phone ?
I thought all the mtk6575 phones were the dual-core phone.
Thanks in advanced.

@zbeyuz: The picture I linked above is from the link you provided in your first post. The first line of the results on the left hand screen shows "Number of cores: 1". Further the vendor correctly lists the chipset as the Mediatek MTK6575. Googling this might bring you (eventually!) to Mediatek's product page for this chipset. You can be sure that if it were actually dual core, the manufacturer would want to tell you about it: they mention no such thing.
Something I noticed while browsing chinese phone websites was that different sellers would provide different specifications for the same devices. Some would claim that a chip was dual core, by counting the presence of a separate main processor and graphics processor as if it was 'dual core'), and some would claim higher chip speed, e.g. 1GHz main processor + 500mhz graphics processor = 1.5GHz total. This is misleading and nothing more than a sales tactic.
It's a shame there's so much misinformation, the vendor I purchased my Haipad from marketed it as having an AMOLED screen, which it plainly doesn't.
As for ROMs, I'm gonna get stuck in to some ROM cooking once my exams are over, but that won't be for another month. In the mean time, I sure would appreciate any tips on getting root. To save anyone checking, SuperOneClick doesn't work.

Additional info on the device:
- Screen is capable of detecting 5 simultaneous multitouch points
- (In the UK at least) Network location does not work. Google maps cannot find my location from cell towers, or from my Wifi. GPS does work however.
- My device came without Android market installed, and as mentioned above, does not work once it is installed.
- Either the proximity sensor or the light sensor (top left by the front camera) flashes faint red constantly when the screen is on. Not a big issue but slightly distracting. The values reported by the prox sensor are just 0 and 1, no middle ground.
- The light sensor reports only 3 light levels: 160, 1200 and 2600. This makes automatic backlight pretty rubbish.
- The speed of the phone is fine - I will add some benchmarks later. Right now it's a pain in the butt since I can't get the benchmark apps from the market.
- WiFi signal seems weaker than I'm used to - my reference devices are my desktop PC, my Fujitsu ST5112 Win7 tablet, my (retired) HTC Desire, and my girl's Samsung Galaxy Y Pro and Asus Win7 Ultrabook. These all received moderate to good WiFi signal in my room from my WNDR3700 N router, all capable of streaming video at this distance. The Haipad on the other hand shows weak signal in the notification bar, and subjectively it is much slower than when it is downstairs nearer the router, a bit of a disappointment here.
- Lots of info on the device is available by starting the "EngineerMode" activity belonging to the "EngineerMode" package. This can be done by making a homescreen shortcut with a third party launcher (eg Nova), and choosing to add an activity shortcut. I recommend only look, don't modify any settings in case you break something!
- I don't know if it's just me but I find the overscroll elasticity way too 'loose'. If I flick a list hard and it hits the end, it takes a long time for the list to settle into the correct position. I look forward to being able to tweak this...
- The battery seems to charge quite slowly. I know it's large so getting to full charge would take longer than with a standard battery, but I am used to large batteies - I used a 2200mAh battery in my HTC Desire and I'm pretty sure it charged faster (using the same charger). Of course a factor in this will be that I have had the device active with the screen on almost constantly, so a lot of power is being diverted to that.
- My phone is capable of connecting to my network (t-mobile)'s proper 3G service, but seems to sometimes choose a 2G service instead, even when there is just as good 3G signal.
Will update this with more as I think of them.
zbeyuz, you say your camera is on the left, I presume you mean the front camera? the main/rear camera is right in the middle.

@richardkemp: Thank you for your quick reply. I did mean the camera in the front is on the left. The main camera is right in the middle, yes.
However, last time, when I tried to put on the Galaxy Note's case, the main camera didn't fit in the right position of the case. Maybe, because the screen was bigger than the real Galaxy Note's, I think ?
Update: The default browser of phone ran quite fast even there was a low wireless signal, but the browser didn't have back and forward button, is that right ?

bthoven said:
Yes, you can.
Mine is i9220+ model, ICS. I got a root script from my vendor. Very easy to root.
Click to expand...
Click to collapse
can you share your root script here?
thanks.

Sure. Let me find a place to upload first.
Sent from my i9220 using Tapatalk 2

bthoven said:
Yes, you can.
Mine is i9220+ model, ICS. I got a root script from my vendor. Very easy to root.
Click to expand...
Click to collapse
After rooting my phone, I have successfully install Google Play Store. What a perfect phone now, for the price!.
Will post details tonight.

Some benchmarks:
Antutu 3251
Linpack 45.3
Nenamark2 19
Vellamo 1021 (NB failed aquarium test)
Neocore 49.1

bthoven said:
Sure. Let me find a place to upload first.
Sent from my i9220 using Tapatalk 2
Click to expand...
Click to collapse
Hi, thank you for your sharing spirit, you can upload your file very easy with: http://www.mediafire.com/

bthoven said:
After rooting my phone, I have successfully install Google Play Store. What a perfect phone now, for the price!.
Will post details tonight.
Click to expand...
Click to collapse
This is from my seller and it works.
1.Please download root file on
www.t-kstore.com/4.0root.rar
2.Go to*setting-developer options-click USB debugging
3.Connect the phone with computer,turn on usb device.
4.Click the file you download from the link TPSparkyRoot.bat*
5.Your phone will restart first time,after the phone start finish(until you see the unlock),click enter in the window of TPSparkyRoot.bat.
6.The phone will restart second time,still the same as first time we did.Then start third time,same as we did in last two*times.Click enter,then phone was rooted.
7.You will see two more app was installed in your phone,that mean root phone successfully.
After successfully rooted, it will install rootexplorer.apk Chinese version which is rather useless for installing Market because it's all in Chinese. You should be able to find Filexpert.apk from the web, and install it.
Here is how to install Google Play Store:
1. Download Vending.apk from http://downloads.androidadvices.com/apks/Vending.3.3.12.apk
2. copy Vending.apk to \system\app\ folder in your phone by using Filexpert in RW mode
3. change permission of Vending.apk file to Read/Write for Owner; Read for others
4. shutdown your phone.
5. switch on your phone, you will see Google Play Store app, and enjoy!

Did anyone mange to get GPS working ? I tried with Google Maps, but fail.

Thanks a bunch bthoven. I took the liberty of tidying up the script a bit, and including the latest Google Play Store and an English root file manager (Filexpert, as you suggested).
I put it on mediafire: http://www.mediafire.com/?qnmvebaa3k8usjw
Same instructions as before, just extract the archive and run TPSparkyRoot.bat with your phone connected by usb cable, and USB debugging mode enabled. If you wish you can disable USB debugging mode once this process is done.
Beware that the play store I included is the mod version from http://forum.xda-developers.com/showthread.php?t=1582422, to allow you to access apps without region restrictions. In future we can properly set the phone's region in build.prop should remove the need for this temporary fix. That's for another day..

bthoven said:
Yes, you can.
Mine is i9220+ model, ICS. I got a root script from my vendor. Very easy to root.
Click to expand...
Click to collapse
Gimme your system image pls, could be handy when trying to port ics rom for my own mtk6573

That's great.
Strange I can't buy any apps. Free apps are ok, though.
Sent from my i9220 using Tapatalk 2

[Q] Can't flash A20 TV box!

Hello everyone,
I have bought various Android TV boxes in the past, and haven't had problems getting them up and running.
I recently ordered 2 chinese models from eBay however, which are giving me nothing but grief. I apologize in advance for such a loooong post, but I am at my wits end and I am really hoping someone can help me out.
The action was for this model here:
www.ebay.com.au/itm/231275032090
It appeared to be a pretty standard model, like a Justop 4.0, but with a hard switch where the optical should be, and a cut down remote.
Firstly, the Specifications according to the auction:
1GB ddr3
4GB nand flash
Allwinner A20 dual core 1GHz CPU
On closer inspection after receiving the unit, an additional physical difference is that the reset button appears to be between the USB ports, instead of behind the AV out - not a big deal.
After powering it up, I am having huge problems with them.
Firstly though, what the software says about the hardware:
Advanced Settings/About Tablet:
Model Number : BBA22
Android Version : 4.2.2
Firmware Version : V2.0
Kernel Version : 3.4.39 [email protected] #10 Wed May 14 22:36:36 CST 2014
Build Number : BBA22-UI4-V2.0.1
And what Droid Info says about the (relevant)hardware:
Model : BBA22 (sdk-normal)
Manufacturer : unknown
Chipset : sun7i
RIL version : sw-dataonly-ril-0.5
Build Number : BBA22-UI4-V2.0.1
Build Bingerprint : softwinners/ninss/ninss4.2.2/NinssSoftware/20140521:eng/test-keys
OS Version : Jelly Bean MR1 (4.2.2)
SDK : 17
CPU Architecture : ARMv7 Processor rev 4 (v71)
Now, the BIGGEST issue these things have, is that at random points of use, it comes up with a message "Warning - System configuration is inconsistent with the production configuration, please contact your supplier, thank you!". This message will flash over and over again for anything from 30 seconds to half an hour. I half suspect it has tablet code SOMEwhere in it also, as it keeps coming up with 'touch the circle' walkthroughs for applications like avia. This might be unrelated though, I have no idea.
So anyway, I have tried doing the Justop 4.0 flash method with a SD card, however it will not turn on if there is a card in the slot. Also, when you hold the reset button down and power it up, it does not seem to go into the diagnostic mode so I can't flash it that way either. I am guessing the ONLY way I can update short of soldering in a serial port, is to use the backup/restore function.
I read through this whole thread here, but cound not fine anything to help me:
http://forum.xda-developers.com/showthread.php?t=2398632
If anyone has any ideas, please let me know, I seriously can't get anything to work. I thought maybe the 'hotspot' being enabled was causing the incinsistency problem, but I used a process killer to stop that at startup, still no luck. Doing a system reset through advanced config didn't help either, I got the error almost as soon as turning the unit back on.
I've attached pictures of the error I am getting, the top of the board, and the back if the board.
Cheers,
Smak
PS - I am yet to hear back from the seller, but if I ever do, I will post the result here...

Smakky said:
Advanced Settings/About Tablet:
Model Number : BBA22
Android Version : 4.2.2
Firmware Version : V2.0
Kernel Version : 3.4.39 [email protected] #10 Wed May 14 22:36:36 CST 2014
Build Number : BBA22-UI4-V2.0.1
Click to expand...
Click to collapse
I seem to be in a very similar situation. My device also reports as being "BBA22" but it's a different form factor and the identification on the board is "TXCZ_A20_v1.0". I tried contacting the people that made the board (Shenzhen Tianxing Chuangzhan Electronic Co.) but they refused to help. I also tried contacting the company that made the firmware images (Shenzhen NINSS Technology Ltd.) and they also refused. The supplier I bought the device from says they have the image file but they can't seem to figure out how to get it to me (they tried emailing the +200mb file then they gave up and stopped responding). The build number on my device is "BBA22-UI4-V2.0.4" so apparently there's an update available that may work on your device.
I'm pretty sure you need to flash the image using the Phoenixsuit program to make a special sdcard that you place in the device and boot from to reflash the device.
Please post your image file if you ever get it!

tisdall said:
I seem to be in a very similar situation. My device also reports as being "BBA22" but it's a different form factor and the identification on the board is "TXCZ_A20_v1.0". I tried contacting the people that made the board (Shenzhen Tianxing Chuangzhan Electronic Co.) but they refused to help. I also tried contacting the company that made the firmware images (Shenzhen NINSS Technology Ltd.) and they also refused. The supplier I bought the device from says they have the image file but they can't seem to figure out how to get it to me (they tried emailing the +200mb file then they gave up and stopped responding). The build number on my device is "BBA22-UI4-V2.0.4" so apparently there's an update available that may work on your device.
I'm pretty sure you need to flash the image using the Phoenixsuit program to make a special sdcard that you place in the device and boot from to reflash the device.
Please post your image file if you ever get it!
Click to expand...
Click to collapse
That is good to know, I might email them again now. Will let you know the outcome!

OK, so I got a reply from the seller.
I've attached the patch file and the instructions to this message, but theres a few things to note.
- Its only like 20 meg big, so it isnt a full firmware update
- The instructions talk about pressing the reset button at the start.., I don;t think this is neccesary if its rooted already
- The instructions are VERY engrish-y, basically just dump the update.zip onto a sd card, and apply the patch through the settings menu
- The default language is changed to some form of Chinese after applying, theres plenty pictorials on how to change the android language though.
- The version has been updated from BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3 - This is still lower than the one you mentioned @ BBA22-UI4-V2.0.4
So far though, I have re-installed all my apps, and haven't seen the error.. yet. I was a little concerned it is still giving me touchpad tutorials, but mouse mode on the remote is making short work of those.
I'll just have to wait and see, I guess.

Smakky said:
OK, so I got a reply from the seller.
I've attached the patch file and the instructions to this message, but theres a few things to note.
- Its only like 20 meg big, so it isnt a full firmware update
- The instructions talk about pressing the reset button at the start.., I don;t think this is neccesary if its rooted already
- The instructions are VERY engrish-y, basically just dump the update.zip onto a sd card, and apply the patch through the settings menu
- The default language is changed to some form of Chinese after applying, theres plenty pictorials on how to change the android language though.
- The version has been updated from BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3 - This is still lower than the one you mentioned @ BBA22-UI4-V2.0.4
So far though, I have re-installed all my apps, and haven't seen the error.. yet. I was a little concerned it is still giving me touchpad tutorials, but mouse mode on the remote is making short work of those.
I'll just have to wait and see, I guess.
Click to expand...
Click to collapse
That seems very promising for you! Unfortunately it probably won't help me at all... It sounds like it's a sort of update patch instead of a whole image. Starting the device with the reset button causes it to load the recovery partition instead of the regular partition (I'm guessing you saw a green android with a text menu with options for recovery). I full flashing would/could involve an SDcard, but I think you would have to create it with Phoenixsuit and not just copy the file contents over (it would then just boot directly from the SDcard and you wouldn't need to press the reset button).
In my case, both the regular boot partition and the recover partition are wrecked so I couldn't even try this patch if I wanted to.
Thanks for posting, though... Hopefully it helps someone else out.

tisdall said:
That seems very promising for you! Unfortunately it probably won't help me at all... It sounds like it's a sort of update patch instead of a whole image. Starting the device with the reset button causes it to load the recovery partition instead of the regular partition (I'm guessing you saw a green android with a text menu with options for recovery). I full flashing would/could involve an SDcard, but I think you would have to create it with Phoenixsuit and not just copy the file contents over (it would then just boot directly from the SDcard and you wouldn't need to press the reset button).
In my case, both the regular boot partition and the recover partition are wrecked so I couldn't even try this patch if I wanted to.
Thanks for posting, though... Hopefully it helps someone else out.
Click to expand...
Click to collapse
Hmm, is clockworkmod still a thing? I could try taking a backup of my ROM and see if that's something you can use.., only problem is I will need a bit of time. If I get a chance, I'll do it over the weekend. I will need a place to dump the image though, it will be too big to attach here, can sort that out later though.

Smakky said:
Hmm, is clockworkmod still a thing? I could try taking a backup of my ROM and see if that's something you can use.., only problem is I will need a bit of time. If I get a chance, I'll do it over the weekend. I will need a place to dump the image though, it will be too big to attach here, can sort that out later though.
Click to expand...
Click to collapse
I'd appreciate that... Your board seems to have a completely different layout, but all the same components. I'm not familiar with clockworkmod, though, so I'm not sure how that backup would work. I guess I'd need to get clockworkmod flashed on to the recovery partition first and then I could flash the backup to the NAND from there?

tisdall said:
I'd appreciate that... Your board seems to have a completely different layout, but all the same components. I'm not familiar with clockworkmod, though, so I'm not sure how that backup would work. I guess I'd need to get clockworkmod flashed on to the recovery partition first and then I could flash the backup to the NAND from there?
Click to expand...
Click to collapse
I'm not actually too sure. The last timed I used clockworkmod was for flashing a galaxy s2 phone, so I'm not even too sure if its still around or compatible with tv boxes. There will definately be SOME sort of tool though, that can take a full backup suitable for restoring. I'm about at the limit of my knowledge, so I am sort of playing by ear and going into a google-learn-try sort of cycle as I try different things. Maybe someone with more experience will stumble in here and let us know what we need to do

This is interesting... I found another device with an identical PCB board: YBKJ_A20 (I can't post links yet, but a Google search will find it) Several chips are different so the firmware would differ. It's so hard to work with these devices when no one claims credit for making a lot of these things!

What is J4?
http://dl-1.va.us.xda-developers.com/2/9/3/6/8/3/3/DSC_0207s.jpg
I was wondering what the upper left 2 pin connector is for? (the little white 2 pin plug next to the USB)
Is it SPDIF? Power input? output? Something else? I see in this picture a cable connected so i'm hoping you can tell.

Ask BBA22-V.1.50 TV BOX Model Android 4.2 Firmware
Smakky said:
OK, so I got a reply from the seller.
I've attached the patch file and the instructions to this message, but theres a few things to note.
- Its only like 20 meg big, so it isnt a full firmware update
- The instructions talk about pressing the reset button at the start.., I don;t think this is neccesary if its rooted already
- The instructions are VERY engrish-y, basically just dump the update.zip onto a sd card, and apply the patch through the settings menu
- The default language is changed to some form of Chinese after applying, theres plenty pictorials on how to change the android language though.
- The version has been updated from BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3 - This is still lower than the one you mentioned @ BBA22-UI4-V2.0.4
So far though, I have re-installed all my apps, and haven't seen the error.. yet. I was a little concerned it is still giving me touchpad tutorials, but mouse mode on the remote is making short work of those.
I'll just have to wait and see, I guess.
Click to expand...
Click to collapse
Hello
Thank You For This Firmware But It Work For BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3.
My Device Model is ((BBA22-V.1.50)) with Android 4.2 and I had to update it with your firmware file to fix problem black page after boot.
after update my device with your firmware, black page broblem is solved but device not work properly and it show Error message for (android.process.acore) systematically in loop!
also I can not make very actions because this error message show repeatedly.
also the default device language is china and i can not change language (error message show repeatedly)
have you original firmware for ((BBA22-V.1.50)) with Android 4.2 device???
thank you for help me...

H.SHAFAGHI said:
have you original firmware for ((BBA22-V.1.50)) with Android 4.2 device???
Click to expand...
Click to collapse
So... For everyone looking for a full firmware for this box, and stumbled upon this thread from google like I did: DESPAIR NO MORE.
I found a compatible firmware for this device (exacly as described and same board as the one OP has) It will work even if your box came preinstalled with another software version, but its the same hardware
Found it in another thread, posted by @daaviles30 Its not EXACLY the same as the one I had originally loaded but appears to work without any issue whatsoever (even the remote works), if a little bit better.
So here it is:
daaviles30 said:
A20_V20_SDK_EN_XBMC_0703-2.img*491.4 MB
*https:/ /mega.co.nz/#!XAIRiD5Q!aIb0tvvjvzUdaf11vIR7PAadeXPV8XizYJ9X2mAzpQI
RH46-update-a20.zip*582 KB
*https:/ /mega.co.nz/#!HZwTgQIT!LQGxb6R-lCIKe58RgIGROfufY-aq5PODSAq3-NPKOeo
PhoenixCard_V309
*http:/ /mega.co.nz/#F!HAIhBJyS!L_UQPNnYdPyHTD3ggnJ6OA
After flashing update and then go to the play store and download SuperSU update that and your ready to go.
---------- Post added at 03:57 PM ---------- Previous post was at 03:29 PM ----------
Titanium Backup Pro v6.1.5.3.apk*6.2 MB
*https:/ /mega.co.nz/#!vAAWRJga!vOFKlAq_25ssrG5kvwa3-oC-d0saL06YGBIWIyN2jss
You can delete all the unwanted system apps with this app.
Hope this helps Happy New Years.
Click to expand...
Click to collapse
The flashing process is exacly as described earlier in this thread. Use phoenix card to burn the img to an SD card, turn the device on with the card inserted in the slot and enjoy your restored android box.

It Working Only With Booting From Memory Card Slot...
amedeh123 said:
So... For everyone looking for a full firmware for this box, and stumbled upon this thread from google like I did: DESPAIR NO MORE.
I found a compatible firmware for this device (exacly as described and same board as the one OP has) It will work even if your box came preinstalled with another software version, but its the same hardware
Found it in another thread, posted by @daaviles30 Its not EXACLY the same as the one I had originally loaded but appears to work without any issue whatsoever (even the remote works), if a little bit better.
So here it is:
The flashing process is exacly as described earlier in this thread. Use phoenix card to burn the img to an SD card, turn the device on with the card inserted in the slot and enjoy your restored android box.
Click to expand...
Click to collapse
Hello My Friend And Thank You For Replay...
This Android is Working And is Very Good But i Can Not Install This To My Device. I Copy The IMG File To A External Memory Card (Using PhonixCard Application) and put the Memory Card To My Device And PowerOn My Device. My Device Automatically Boot From Memory Card And New Android is Appear. It Is Very Fast And Have No Errors.
Now...
HOW I CAN INSTALL THE IMG FILE TO MY DEVICE (INTERNAL MEMORY) AND BOOT MY DEVICE WITHOUT USING MEMORY CARD (FOR ALL TIMES)???

H.SHAFAGHI said:
Hello My Friend And Thank You For Replay...
This Android is Working And is Very Good But i Can Not Install This To My Device. I Copy The IMG File To A External Memory Card (Using PhonixCard Application) and put the Memory Card To My Device And PowerOn My Device. My Device Automatically Boot From Memory Card And New Android is Appear. It Is Very Fast And Have No Errors.
Now...
HOW I CAN INSTALL THE IMG FILE TO MY DEVICE (INTERNAL MEMORY) AND BOOT MY DEVICE WITHOUT USING MEMORY CARD (FOR ALL TIMES)???
Click to expand...
Click to collapse
Wow.
The Phoenixsuite makes an sdcard that flashes the internal memory. After it's finished flashing, you take the card out and it runs off of the internal NAND. That's it. It never runs the Android from the sdcard.

My device can boot from sd-card!!! I need to flash this to install your android!
tisdall said:
Wow.
The Phoenixsuite makes an sdcard that flashes the internal memory. After it's finished flashing, you take the card out and it runs off of the internal NAND. That's it. It never runs the Android from the sdcard.
Click to expand...
Click to collapse
Hello My Friend And Thank You For Replay...
1- My Device Can Boot From SD-CARD With A Bootable Memory Card! (Such As OpenSuse Linux)
2- I Use PhonixCard Application That You Send.
(PhoenixCard_V309
*http:/ /mega.co.nz/#F!HAIhBJyS!L_UQPNnYdPyHTD3ggnJ6OA
3- I Can Not Use PhonixSuit Application And I Don't Know How To Use PhonixSuit. When I Connect My Device To My Computer To Use PhonixSuit, My Computer Don't Find Any Hardware And Can Not Connect!
4- I Copy The IMG File To A SD-CARD (Using PhonixCard Application) and put the Memory Card To My Device And PowerOn My Device. My Device Automatically Boot From Memory Card And New Android is Appear. If Unplug The SD-CARD And Power On My Device, Old Android Is Appear!!! Master Android Software Is In My Device And I Need To Clear This From My Device And Install Your Android!
HOW I CAN INSTALL YOUR ANDROID TO MY DEVICE (INTERNAL MEMORY) AND BOOT MY DEVICE WITHOUT USING MEMORY CARD???

I need help!!!!
no any answer???

Lenovo S8 A7600 [Official Rom] [Instructions]

Hello
Seeing there is very little info about this model, I decided to make available my findings. Initially I was a bit annoyed with the phone in the start. The "stock" rom was a disaster (malware-ridden, non-official). First I tried to de-bloat that but the whole rom was just bad and unstable. Since then I've learned some things, and newer official builds have surfaced.
Also I should say; this phone is basically a K3 Note with 720p screen (another difference is MT6752M cpu instead of MT6752 in the K3 Note) and it's very similar to the A7000 model.
The best rom I have tried so far is this : VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU ---> DL - This is latest official stock Rom for the 7600 (not 7600M which is Chinese version)
Here is also TWRP recovery with english + chinese language: DL
Rename ROM to "update.zip", use stock recovery and flash (probably best to use stock lenovo recovery first to make sure everything gets flashed, can be flashed with twrp but I suspect it only flashes boot and system), boot it up, finish the setup wizard, turn it off. Use SPflashtool to flash TWRP, turn off again.
Start phone in recovery mode (Press volume Up + Down, and power button. Hold until recovery appears). Now you can flash Gapps (arm64, lollipop 5.0, opengapps.org), SuperSU, xposed arm64 lollipop, etc.
I have been able to get a very pleasing phone doing this. I don't really feel right now that much is missing, and I'm not annoyed by various other problems. Using xposed modules gravity box, GEL settings, Lollipop memory fix, etc.
This Rom has very little bloatware, there are some chinese apps, but they can easily be uninstalled - don't even need root. There are a few more you can uninstall using root if you want, but be careful not to break the system.
I'm not going to explain everything in great detail here. Using SPFlashTool is explained so many other places. Getting supersu and xposed also explained everywhere.
If I could I would integrate all in to one flashable package, but I'm not a rom cooker. Sorry
PS: As you can see in the image, i use iFONT xposed. But I don't enable it as xposed module, that caused problems. I just used it to download a font and applied it. It's system wide, and it works
There's a newer link in post #6 with the latest firmware
There's a newer link in post #10 with TWRP 3.0.2.3

Hi,do you have custom rom for lenovo s8 a7600?

askermk2000 said:
Hello
The best rom I have tried so far is this : VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU ---> - This is latest official stock Rom for the 7600 (not 7600M which is Chinese version)
Here is also TWRP recovery with english + chinese language:
Click to expand...
Click to collapse
sorry, I had to remove your links, because I have small amount of posts and I am not allowed to submit post with urls - even if quoted.
Hi!
Do you know way to install other languages into ROM (or add them and somehow rebuild ROM), I am searching informations for last few days with no succes. The main problem is when international apps using EN for directory, when all information in directory should be in my language (polish). Changing locale helps, but settings are crashing with changed locales..
Also I installed xposed, but system tells me that xposed is not installed... I heard about it from your post and found only version v79 for sdk 21. I need to remove search box from desktop at google now.

Any custom rom for this device ?

Hi everyone, hi @askermk2000
I just received my Lenovo S8 A7600 "Golden Warrior" phone from an Asian vendor, it came with VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU and SuperSU was seemingly installed when I first turned on phone (asked me to update binary).
Specs are MTK6752M 64-bit OctaCore, 2GB RAM, 8GB storage.
Can I install your version VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU through the Lenovo stock recovery/flash (phone) as you suggest?
You mention "not 7600M" so I am not sure...
I also see in other places that there's even a newer VibeUI version VIBEUI_V2.5_1537_5.1978.1_ST_A7600_CU, any idea where to get it and if it is compatible? I cannot find any download link...
Thanks...

konsti said:
Hi everyone, hi @askermk2000
I just received my Lenovo S8 A7600 "Golden Warrior" phone from an Asian vendor, it came with VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU and SuperSU was seemingly installed when I first turned on phone (asked me to update binary).
Specs are MTK6752M 64-bit OctaCore, 2GB RAM, 8GB storage.
Can I install your version VIBEUI_V2.5_1532_5.1797.1_ST_A7600_CU through the Lenovo stock recovery/flash (phone) as you suggest?
You mention "not 7600M" so I am not sure...
I also see in other places that there's even a newer VibeUI version VIBEUI_V2.5_1537_5.1978.1_ST_A7600_CU, any idea where to get it and if it is compatible? I cannot find any download link...
Thanks...
Click to expand...
Click to collapse
Hello
It's wise of you to remove that dubious vendor firmware.
Since "A7600M" is a model number, or simply name of the phone, I would be surprised if it doesn't say so anywhere. Look at the packaging, phone and battery compartment etc. If you don't see A7600M anywhere, it's likely not that model.
See here: Lenovo Inquiry Page
At the bottom there you'll find link for the latest official (Full) firmware.

Thank you @askermk2000 for your kind and immediate reply.
This known asian vendor on their page mentions: Lenovo "Golden Warrior" S8 A7600, 4G, LTE, MTK6752M @1.5GHz 64bit OctaCore, 2GB RAM, 8GB storage, 5.5inch HD IPS screen, OTG, Android 5.0 Phone
In settings, the ROM version is: VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU, no bloatware; was surprised to see SuperSU pre-installed but the vendor does have a service (at a cost) to provide pre-rooted phones (which I did NOT order but maybe got).
The (Lenovo) box doesn't mention much, even under the phone I can see a lot of Chinese, so it's definitely for China -- vendor wrote it's unlocked for world use on their page.
The mentioned model is A7600 on the rear, there's only a A838 reference besides model (i.e. QQ-A838-xxxxxx) but not much more than that.
I suspect these may be older stock they wanted to get rid of.
As you can see, the model is (S8) A7600, not A7600M. The chipset has "M" i.e. is MTK6752M.
So can I not use the official latest (full) firmware that you posted, via stock recovery?
Is this not for MTK6752M processor? Will this firmware brick the phone, you think?
Thank you very much in advance!

konsti said:
Thank you @askermk2000 for your kind and immediate reply.
This known asian vendor on their page mentions: Lenovo "Golden Warrior" S8 A7600, 4G, LTE, MTK6752M @1.5GHz 64bit OctaCore, 2GB RAM, 8GB storage, 5.5inch HD IPS screen, OTG, Android 5.0 Phone
In settings, the ROM version is: VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU, no bloatware; was surprised to see SuperSU pre-installed but the vendor does have a service (at a cost) to provide pre-rooted phones (which I did NOT order but maybe got).
The (Lenovo) box doesn't mention much, even under the phone I can see a lot of Chinese, so it's definitely for China -- vendor wrote it's unlocked for world use on their page.
The mentioned model is A7600 on the rear, there's only a A838 reference besides model (i.e. QQ-A838-xxxxxx) but not much more than that.
I suspect these may be older stock they wanted to get rid of.
As you can see, the model is (S8) A7600, not A7600M. The chipset has "M" i.e. is MTK6752M.
So can I not use the official latest (full) firmware that you posted, via stock recovery?
Is this not for MTK6752M processor? Will this firmware brick the phone, you think?
Thank you very much in advance!
Click to expand...
Click to collapse
No, your phone is the right model, as you said "Unlocked for world use", the A7600M only works in china.
MTK6752M is the chipset used - it has nothing to do with A7600M, that there are two M's there is a coincidence.
So you can go ahead and use the latest firmware.

OK for the sake of information to everyone, I did the following:
0. Formatted SD card from within the phone (just to be sure). Then charged battery fully to 100%.
1. Copy (via PC) the latest firmware zip file (currently is VIBEUI_V2.5_1628_5.2186.1_ST_A7600_CU_WC5DAF1811.zip about 1GB size) to root of my SD card. This file looks like a recovery type, but files inside (some IMG, DAT and scatter files) could be flashable from PC (i.e. like SP Flash Tool etc.).
2. Renamed it update.zip
3. Put SD and battery back to phone.
4. Started phone in recovery mode: Pressed Volume Up + Down and Power buttons simultaneously; held them until recovery screen appeared. First, Lenovo logo, then a screen to choose language (Chinese/English); pressed English.
5. Selected the Install Upgrade Pack menu and pressed "YES" to the warning about encrypted phones.
6. Waited for update with circle-type update progress; for some reason it got seemingly stuck at 75% for some period. Waited patiently to finish.
7. I selected "Back" to go and clean user data.
8. Once done, I pressed back touch-button and selected "Restart".
9. Waited to see what happens. Was curiously greeted with a white chinese splash-screen saying "4G" something. Waited...
10. Phone next booted to the usual Lenovo logo, with some chinese text at the bottom and three dots [...] flashing with thin white progress-line (most likely "rebuilding apps"?). This took a while, too.
11. The phone finally went into the wizard in Chinese, and then offered choice of English or Chinese as wizard language.
Wizard finished OK, then went to Settings -> About device -> ROM is upgraded indeed to VibeUI v2.5-1628 and Android 5.0.2.
NOTE: There's a LOT of chinese stuff, unfortunately, I guess it's part of the ROM; obviously this ROM is non-rooted...
However, the asian vendor installed/shipped ROM (VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU) was very light and fast -- I guess a deodex version? Or a VibeUI port?
Many thanks @askermk2000 for your help nevertheless.
Any idea, compared to your experience., if...
a) if your URL for latest firmware is maybe only for China? Your first post photos/screenshots don't have such Chinese apps On this ROM version, the shutdown logo is again that white chinese splash-screen with a big red "4G". Perhaps there's some other version for non-Chinese region?
b) if there's a stock, deodex ROM like that one? How did the Asian vendor find such light ROM, I am curious -- in that shipped ROM version, I had many menu languages. Now I only have English and Chinese as choices
c) if I need TWRP so I can flash Play Store, gapps and SuperSU? I don't think stock Recovery allows for these, any idea?
Cheers mate.

konsti said:
OK for the sake of information to everyone, I did the following:
0. Formatted SD card from within the phone (just to be sure). Then charged battery fully to 100%.
1. Copy (via PC) the latest firmware zip file (currently is VIBEUI_V2.5_1628_5.2186.1_ST_A7600_CU_WC5DAF1811.zip about 1GB size) to root of my SD card. This file looks like a recovery type, but files inside (some IMG, DAT and scatter files) could be flashable from PC (i.e. like SP Flash Tool etc.).
2. Renamed it update.zip
3. Put SD and battery back to phone.
4. Started phone in recovery mode: Pressed Volume Up + Down and Power buttons simultaneously; held them until recovery screen appeared. First, Lenovo logo, then a screen to choose language (Chinese/English); pressed English.
5. Selected the Install Upgrade Pack menu and pressed "YES" to the warning about encrypted phones.
6. Waited for update with circle-type update progress; for some reason it got seemingly stuck at 75% for some period. Waited patiently to finish.
7. I selected "Back" to go and clean user data.
8. Once done, I pressed back touch-button and selected "Restart".
9. Waited to see what happens. Was curiously greeted with a white chinese splash-screen saying "4G" something. Waited...
10. Phone next booted to the usual Lenovo logo, with some chinese text at the bottom and three dots [...] flashing with thin white progress-line (most likely "rebuilding apps"?). This took a while, too.
11. The phone finally went into the wizard in Chinese, and then offered choice of English or Chinese as wizard language.
Wizard finishedOK, then went to Settings -> About device -> ROM is upgraded indeed to VibeUI v2.5-1628 and Android 5.0.2.
There's a LOT of chinese stuff, unfortunately, I guess it's part of the ROM; obviously this ROM is non-rooted.
But the installed/shipped ROM (VIBEUI_V2.5_1524_5.1460.1_ST_A7600_CU) was very light and fast -- I guess a deodex version? Or a VibeUI port?
Many thanks @askermk2000 for your help nevertheless. Your photos/screenshots however don't have such Chinese apps...
Any idea, compared to your experience., if...
a) if your linked latest firmware is maybe only for China? The shutdown logo is again that white chinese splash-screen with a big red "4G". Perhaps there's some other version for non-Chinese region?
b) if there's a stock, deodex ROM like that one? How did the Asian vendor find such light ROM, I am curious -- in that shipped ROM version, I had many menu languages. Now I only have English and Chinese as choices
c) if I need TWRP so I can flash Play Store, gapps and SuperSU? I don't think stock Recovery allows for these, any idea?
Cheers mate.
Click to expand...
Click to collapse
Hello again
Yes, the official Chinese rom only has Eng/Chinese language. There may be a way to add more, idk because I only need English. The 4G boot logo is normal, was there on the rom linked in the first post also.
All the Chinese apps (or almost all) can be uninstalled without root permission. I never experience the rom to be less than fast and good, but I always immediately uninstalled the chinese apps, they do me no good anyways.
The rom you where supplied with is what is called ROW (international). If it's possible to get an updated ROW rom idk. All I know is that if you want a clean unhampered ROM, then the one I've shown you is the way to go.
PS: Yes you need custom recovery to flash the other stuff. Here is an updated TWRP: TWRP-3.0.2.3
^^This recovery has wrong device description in build.prop (actually it uses Lenovo K3) as a consequence you will receive error if trying to flash ROM's. So try the old one if you get these errors.

HI everyone, hi @askermk2000 and many many thanks for sharing your TWRP version 3.0.2.3 with us.
I followed this thread on how to root the Lenovo S8 A7600 phone and downloaded the tools needed (SP Flash Tool v5.1452.00 and VCOM drivers) on my Windows 7 laptop; then, installed them accordingly. Many thanks to @XxpikaachuuxX for providing links and steps on his thread!
1. Started up SP Flash Tool with administrator rights.
2. Chose the scatter file that was inside your shared TWRP-3.0.2.3 zip file; recovery image is automatically selected.
3. Shut down phone, remove battery.
4. Made sure all boxes in list were unchecked, except "recovery" then pressed "Download" button.
5 . Plugged phone on USB cable to PC, then inserted battery under the phone, as instructed.
6. Windows made a "USB plugged" sound, then SP Flash Tool detected phone OK and flashed recovery fine (there was the green tick-mark shown!)
7. Removed cable, removed battery, waited 10 seconds, re-inserted battery.
Then, copied to my SD card root folder, via PC (card reader) the following:
a) UPDATE-SuperSU-v2.46.zip
b) gapps-lp-20150211-signed.zip from this thread (lp=Lollipop)
(I had downloaded and installed wrong Gapps for 5.1 Android, but we need 5.0 version for this ROM--silly me. I just re-flashed via TWRP the correct package).
Went into recovery by pressing briefly Power then when the short vibration was felt, pressed VOL+ and VOL- and POWER simultaneously; the pleasant splash-screen of TWRP was shown!
1. Installed the needed SuperSU; then went back.
2. Installed gapps.
3. Wiped cache and Davlik (inside TWRP) then rebooted phone i.e. "system".
4. Waited patiently as it took a few minutes to go on the main Home screen.
5. Created Google account in "Settings" then went straight to "PlayStore" to update all applications, including SuperSU.
6. Ran SuperSU and upon request, updated the binary "normally" and rebooted just fine.
NOTE: In the Wi-Fi detected lists, since my first ever boot of this phone, I get a (fake?) SSID entry "NVRAM WARNING: Err = 0x10" which is apparently easily fixed for other phones. Do you guys you also got that?
A bunch of final questions to you, @askermk2000 when you have time to reply.
1) Does the stock weather display on a Home page work for you? I only get Chinese cities, location doesn't work as it says "city not found". Manual input of e.g. Europe cities doesn't show results, either.
2) Despite removing most via "Settings -> App Manager", any suggestions oh how to remove some further chinese apps that are marked "system app"? This article suggests NoBloat Free, Titanium Backup, System App Remover and App Master. I am not familiar with this approach but for example, "LenovoStore" could be removed...
3) Do you have by any chance the original, black b/g, folding (yes, boring) Lenovo animation boot logo to share? I see there's a file logo.bin for SP Flash Tools but others talk about /system/media/bootanimation.zip file... I ask if you have it, as the "Boot Animations" PlayStore app may not have the stock Lenovo boot. Perhaps flashing it via SP Flash Tool is better?
4) Will you kindly share any updates here to TWRP versions, whenever released? Do you anticipate any update in the coming 1-2 months, for example? (not sure there are bugs in TWRP-3.0.2.3, if any)
5) If there is a newer Lenovo official ROM available (than today) we obviously lose the TWRP recovery if we flash it all via SP Flash Tools; but we keep TWRP recovery if we update to the new ROM via TWRP, correct?
Thank you.

konsti said:
HI everyone, hi @askermk2000 and many many thanks for sharing your TWRP version 3.0.2.3 with us.
I followed this thread on how to root the Lenovo S8 A7600 phone and downloaded the tools needed (SP Flash Tool v5.1452.00 and VCOM drivers) on my Windows 7 laptop; then, installed them accordingly. Many thanks to @XxpikaachuuxX for providing links and steps on his thread!
1. Started up SP Flash Tool with administrator rights.
2. Chose the scatter file that was inside your shared TWRP-3.0.2.3 zip file; recovery image is automatically selected.
3. Shut down phone, remove battery.
4. Made sure all boxes in list were unchecked, except "recovery" then pressed "Download" button.
5 . Plugged phone on USB cable to PC, then inserted battery under the phone, as instructed.
6. Windows made a "USB plugged" sound, then SP Flash Tool detected phone OK and flashed recovery fine (there was the green tick-mark shown!)
7. Removed cable, removed battery, waited 10 seconds, re-inserted battery.
Then, copied to my SD card root folder, via PC (card reader) the following:
a) UPDATE-SuperSU-v2.46.zip
b) gapps-lp-20150211-signed.zip from this thread (lp=Lollipop)
(I had downloaded and installed wrong Gapps for 5.1 Android, but we need 5.0 version for this ROM--silly me. I just re-flashed via TWRP the correct package).
Went into recovery by pressing briefly Power then when the short vibration was felt, pressed VOL+ and VOL- and POWER simultaneously; the pleasant splash-screen of TWRP was shown!
1. Installed the needed SuperSU; then went back.
2. Installed gapps.
3. Wiped cache and Davlik (inside TWRP) then rebooted phone i.e. "system".
4. Waited patiently as it took a few minutes to go on the main Home screen.
5. Created Google account in "Settings" then went straight to "PlayStore" to update all applications, including SuperSU.
6. Ran SuperSU and upon request, updated the binary "normally" and rebooted just fine.
NOTE: In the Wi-Fi detected lists, since my first ever boot of this phone, I get a (fake?) SSID entry "NVRAM WARNING: Err = 0x10" which is apparently easily fixed for other phones. Do you guys you also got that?
A bunch of final questions to you, @askermk2000 when you have time to reply.
1) Does the stock weather display on a Home page work for you? I only get Chinese cities, location doesn't work as it says "city not found". Manual input of e.g. Europe cities doesn't show results, either.
2) Despite removing most via "Settings -> App Manager", any suggestions oh how to remove some further chinese apps that are marked "system app"? This article suggests NoBloat Free, Titanium Backup, System App Remover and App Master. I am not familiar with this approach but for example, "LenovoStore" could be removed...
3) Do you have by any chance the original, black b/g, folding (yes, boring) Lenovo animation boot logo to share? I see there's a file logo.bin for SP Flash Tools but others talk about /system/media/bootanimation.zip file... I ask if you have it, as the "Boot Animations" PlayStore app may not have the stock Lenovo boot. Perhaps flashing it via SP Flash Tool is better?
4) Will you kindly share any updates here to TWRP versions, whenever released? Do you anticipate any update in the coming 1-2 months, for example? (not sure there are bugs in TWRP-3.0.2.3, if any)
5) If there is a newer Lenovo official ROM available (than today) we obviously lose the TWRP recovery if we flash it all via SP Flash Tools; but we keep TWRP recovery if we update to the new ROM via TWRP, correct?
Thank you.
Click to expand...
Click to collapse
About that Wi-Fi problem. No I don't have it, and I was reading that page with the fix. It seems it's caused by using wrong settings in SPFlashtool, so likely the vendor did this when applying his trash firmware.
If you wifi is not working (as some reported in that thread) I would of course try to get a refund.
Weather gadget only has Chinese cities, yes I noticed that so I was using yahoo weather instead on my phone.
I would suggest Titanium Backup, it's what I use.
No, sorry I don't have any boot logos or animations.
This phone is a bit slow on the updates. But if there's an update, you can do it through the OTA update function which only downloads the changes as a patch. Though If your phone is heavily modified it might not work correctly. Could try a factory reset first, or simply start a fresh.
Then you would probably need to download the original recovery and flash that first.
PS: You can break the system by removing too much of the lenovo stuff. Remember VibeUi is heavily integrated and impossible to remove completely. Also, for gapps go to www.opengapps.org

help
Can you help me a bit? I got an infected phone and i need to install a new rom to keep myself safe. (im kinda noob to installing stuff like these)

First bootanimation "china4Gchina", second ok and poweroff ok.
Please help to change to first animation or delete.
Thanks.