hello to all, I need help, I have an honor 10 bkl l09 c 432 updated to 141, I installed lineage 15.1 and all right, but I had the brilliant idea to flash from recovery the blue kernel spark r14, now the phone keeps restarting to get into recovery (unofficial 3.2.1.0 the win teams) but does not enter, I can not turn it off, if I connect it to the pc I can reboot it fastboot, but from tool all in one shell I can intervene, the tool tells me "fastboot device ready, but it does not find the device, and shell does not find the device, but if I connect it and give the reboot command the phone will reboot but continue to stop on the antecend the recovery screen. this trouble?
Related
Hi Guys,
1. I have upgraded my phone to OTA-EMUI 4.0_H60-L02-L12_6.2.1_6.3.1 which runs properly.
2. Afterwards, I wanted to root this phone again, which doesn't work neither with multi-tool nor TRWM.
3. After reboot the phone was going into animated Honor logo, but nothing more.
4. I tried to reinstall the original firmware using adb shell and dd. Same situation
Unluckily the phone doesn't boot normally after the reboot.
5. Pressing the power button for a while lets the phone vibrate ones and appear logo but nothing else happens.
Pressing 3 buttons lets the phone come up with the honor-logo, but nothing more.
Pressing power + vol- and connected usb cable lets the phone come up with fastboot.
When the phone is in fastboot mode my computer recognizes it as "Android Phone - Android Sooner Single ADB Interface",
but ADB doesn't show any devices. Fastboot works fine and is Unlocked. Hisuite doesn`t recognize device...search drivers but
nothing happens.
6. Unbricking the phone using fastboot (flash boot, cust, recovery and system) doesn't change anything.
Flashing the stock recovery, using a sd-card with dload folder and firmware and booting the phone with any button
combination doesn't change anything (no installer, no recovery). Flashing CWM and booting the phone with any button
combination doesn't change anything (no recovery). ADB doesn't show a device at any other point of booting.
7. Now the accu from my phone is empty and I can't charge it again, neither with USB-cable plugged to Computer nor with
standard cable plugged into a switch. I need help before playing tennis with this phoe!! :crying:
Any idea or solution how to fix all my problem?
Solved Problem with bricked H60 L02, which doesn't charge
Solved the Problem with this post By panamera2011:
http://forum.xda-developers.com/honor-6/general/l02-l12-how-to-emui-4-0-to-emui-3-1-t3318231:
L02/L12 - How to go back from EMUI 4.0 to EMUI 3.1
I flashed with fastboot:
fastboot devices
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot flash fastboot FASTBOOT.img
from OTA-EMUI 4.0_H60-L02-L12_6.2.1_6.3.1
Afterwards the phone began to charge again.
I copied the update.app from H60_EMUI3.1_Android5.1_6.1.1 to the folder DLOAD, inserted the SD -Card,
disconnected the USB cable from your PC, pressed 3btn till the Honor logo appears
continued to press 3btn for 8 -10 seconds and the recovery process began.
Thank a lot to panamera2011
Thanks Sam Cro!
I think your answer is underrated.
Most of my bricks on the Honor 6 (H60-L12) could be restored thanks to your help!
Hello guys,
I try to install TWRP on my Honor 8, I have it on B388.
I unlocked the bootloader, I execute ADB and type the unlock code, after execute the commad on ADB, the phone restarted and wipe the phone. Also on Settings, on Developer options, Enable unlock OEM is on gray and enable it.
After this, I downloaded the TWRP for Honor 8 version 3.1.1 and 3.1.0 I tried to flash them with ADB, first, I tried with 3.1.1, ADB mentioned than the command was ok and after restart it I pressed VOL + and VOL - so I received a message on the screen: "Your device has been unlocked and cant be trusted... Your device is booting now..." after some time, the phone goes to EMUI recovery and try to install an update, this update failed at 5% but in theory, it shouldnt go to this, it should go to TWRP, am I right?
Can you please help me to install TWRP on this device?
I followed the steps on the post: https://forum.xda-developers.com/honor-8/help/install-twrp-frd-l14-t3572559 but I didnt install the B360, shall I install this version? Can you please help me on this?
[Fixed]
sammyrano said:
Hello guys,
I try to install TWRP on my Honor 8, I have it on B388.
I unlocked the bootloader, I execute ADB and type the unlock code, after execute the commad on ADB, the phone restarted and wipe the phone. Also on Settings, on Developer options, Enable unlock OEM is on gray and enable it.
After this, I downloaded the TWRP for Honor 8 version 3.1.1 and 3.1.0 I tried to flash them with ADB, first, I tried with 3.1.1, ADB mentioned than the command was ok and after restart it I pressed VOL + and VOL - so I received a message on the screen: "Your device has been unlocked and cant be trusted... Your device is booting now..." after some time, the phone goes to EMUI recovery and try to install an update, this update failed at 5% but in theory, it shouldnt go to this, it should go to TWRP, am I right?
Can you please help me to install TWRP on this device?
I followed the steps on the post: https://forum.xda-developers.com/honor-8/help/install-twrp-frd-l14-t3572559 but I didnt install the B360, shall I install this version? Can you please help me on this?
Click to expand...
Click to collapse
Download the new version TWRP 3.1.1-1 FRD, flash this version and TWRP is working now on my device
Hi everyone.
Well it's a well known issue of yuphoria to get stuck on bootloop and you can find many youtube video to fix it too. My yuphoria is now experiencing the same problem. It is stuck in bootloop. Thing that is different in my case is it bootloops on anything. Even if i connect it to a power source or a laptop, it start itself and get stuck in bootloop. I also noticed that it is not recognized by my laptop in adb command prompt so i cant even rely on traditional "boot in recovery method". I tried to put it manually on fastboot mode by pressing down the pwer key along with vol down key. It does reboot in fastboot mode but still is unrecognizable by adb fastboot commands. I flashed bootleggers rom that was based on oreo 8.1 and was my daily driver on this device. Worked quite well too. I also installed twrp recovery but it seems to be absent now as I cant enter in recovery mode in anyway. Please suggest some means to fix this device. Thanks in advance.
I recently flashed my device from android 11 to android 10 Oxygen Os then tried to flash it to Evolution X rom via TWRP in command prompt. After this the device was fine and I tried to install a new kernel by flashing and Now my device is not booting and the screen gets black after the phone starts. Bootloader is working. The twrp is not working manually as well as using via cmd prompt. Please help with this query, I have no idea.
Re-flash Stock ROM.
jwoegerbauer said:
Re-flash Stock ROM.
Click to expand...
Click to collapse
How to flash stock rom when my phone is stuck in flashboot mode, like I can't even open TWRP in cmd prompt as an img file. How to flash other that that?
Typically one presses the power button continuously for at least fifteen seconds. The device will vibrate once and restart in normal mode.
If this doesn't fix the issue, then, if you can access the phone by means of Fastboot executable, you can try to exit Fastboot mode running this command sequence
Code:
fastboot devices
fastboot reboot
Fixed?
Hi, this is my first post in XDA, so sorry if I'm posting in the wrong section.
I recently got a Redmi Note 11 and today I was going to install KomodoOS in it. I did as follows:
First thing I did was to unlock the bootloader, which seems to have worked fine (I can see the open lock icon alongside the Mi logo when it powers on).
I then flashed TWRP (from here https://www.getdroidtips.com/twrp-recovery-redmi-note-11/). When I first tried the command fastboot flash recovery_a twrp.img, I got an error telling me that recovery_a_a doesn't exist, same for recovery_b (which gave me error that partition recovery_b_a didn't exist). I found on Google I could boot into twrp (fastboot boot twrp.img) and then flash twrp itself (Advanced->Flash recovery), which I did and got no error messages. I booted up the system just normal, rebooted into recovery by issuing adb reboot recovery and it got me back into TWRP. So it seems it was installed successfully.
Lastly, while the phone was on TWRP I copied the rom file into the root directory with adb push komodo-version.zip komodo.zip, clicked on Install, selected komodo.zip then confirmed the installation. It took a few minutes (file is 1.3GB) and it completed with a few errors, but at the top there was the message Install successful.
Then I wiped Dalvik and rebooted the system, but now I'm stuck at a bootloop where it goes to the "No command" screen and reboots. I tried holding volume up+power and volume up while reconnecting the USB but to no avail, can't seem to get out of the loop. Also tried spamming adb devices and fastboot devices on pc but can't connect to the phone.
I'm now a bit desperate, since there's (surprisingly?) not much about this phone out there, and I don't know anything that could be done. Is there still hope?
Links/tutorials I used:
Download and Install AOSP Android 12 on Xiaomi Redmi Note 11
Xiaomi Redmi Note 11 launched in January 2022. The handset came with Android 11. In this tutorial, we will guide you to install Android 12 Custom ROM on
www.getdroidtips.com
Download TWRP Recovery for Xiaomi Redmi Note 11 | Root Using It
On this page, we will guide you to install the TWRP Recovery on Xiaomi Redmi Note 11 (spes). This guide contains both the written instruction and a video
www.getdroidtips.com
[4 Methods] How to Fix TWRP Error: FAILED (remote: No such partition)
In this guide, we will show you four different methods to fix the FAILED (remote: No such partition) error while flashing the TWRP Recovery.
www.droidwin.com
Draining battery and directly going into fastboot as soon as plugging in works or not?
.
dont trust getdroidtip , search rom on xda instead
In Shaomi "No Command" error means system partition has been destroyed. You most likely need to Reflash MIUI using >Mi Flash Tool<.
So your issue is that you cant boot into TWRP? Also, have you tried Power + Vol(-) to get into Fastboot mode. You can also try PC softwares like >Reiboot-For-Android.exe< to boot to recovery or bootloader.
>If you have TWRP no need to use ADB push, just use USB OTG to flash ZIP<