Database Info

Stuck at "...unlocked...booting now..." Bricked?

Solved.
AL10, NXT-C900B133, rescue0.3, NEXT
I unlocked bootloader, installed TWRP, and rooted using SuperSU with no problem by following these directions:
http://forum.xda-developers.com/mate-8/general/guide-unlock-bootloader-root-install-t3301371
I then formatted data using TWRP wipe, then tried to install Stock Rooted No Encrypted Boot from
http://forum.xda-developers.com/mate-8/development/rom-stock-rooted-encrypted-boot-t3303606
The phone never gets past "...unlocked...booting now...." (I did not install insecure_boot because I had trouble finding it---it is not in Mate 8 Android Development, only in Mate 8 Original Android Development.)
I can get to fastboot and to the Huawei recovery in Chinese (which doesn't work---wifi downloading stops with an exclamation point), but TWRP is gone, and I can't get it back by reflashing it. I've tried HiSuite recovery, unbricking using the Italian knife following these instructions:
http://forum.xda-developers.com/mate-8/general/unbrick-updating-to-b321-t3375934
with various roms, and I've tried force flashing an UPDATE.APP from /sdcard/dload. No joy.
I caused the problem by installing a B331 rom when I was at B133—dyslexic much? Once I got TWRP back, flashing a B180 rom worked fine.
The difficulty was getting TWRP back. To do that, I flashed the following files using fastboot—it may be overkill:
TWRP-2.8.7.0-ENG.img,
insecure_boot_b331.img,
and the files in
L29Fastboot.rar.
TWRP

Hey ho!
I had exactly the same problem yesterday.
I figured out my system only was able to boot when I hold down [vol-]&[power].
Then the "not trusted message" had a few more lines and the phone booted up.
When it's up again, you can use adb to reboot to fastboot: adb reboot bootloader
You can also try to go directly to recovery if you alrteady flashed it: adb reboot recovery
From threre you can try again.
btw: I had to use a complete different TWRP version. 3.x somewhat. I think it was from here: http://forum.xda-developers.com/mate-8/development/recovery-twrp-huawei-mate-8-t3298567
Info: I was NOT able to use [vol+]&[power] for Recovery, eRecovery or anything else. I was just stuck.
I hope it helps.

I recommend after getting your device back on track to use twrp to make a recovery on your microsd card. That way u have a sure chance of getting bwck to working order

Same problem here, but when I try to flash recovery or boot image using fastboot, I get the message "FAILED <Remote: command not allowed> ".
Any idea?

iAngus said:
Same problem here, but when I try to flash recovery or boot image using fastboot, I get the message "FAILED <Remote: command not allowed> ".
Any idea?
Click to expand...
Click to collapse
Make sure you have turned on debugging mode and that your device is listed with "fastboot devices".

Make sure you have turned on debugging mode and that your device is listed with "fastboot devices".
Click to expand...
Click to collapse
The debugging mode is on since I unlocked and rooted the phone and the device is listed in "fastboot devices".

iAngus said:
The debugging mode is on since I unlocked and rooted the phone and the device is listed in "fastboot devices".
Click to expand...
Click to collapse
you could fix the same problem I have is not to do help me

cant access recovery

hey all i just got this phone, i unlocked the botloader and installed twrp from the fastboot.
now when i try to get into the recovery i have this annoying massage "your device has been unlocked and cant be trusted, i dont know what to do anymore, please how can i get into recovery without root premmision for some apps.
tnx

guy6136206 said:
hey all i just got this phone, i unlocked the botloader and installed twrp from the fastboot.
now when i try to get into the recovery i have this annoying massage "your device has been unlocked and cant be trusted, i dont know what to do anymore, please how can i get into recovery without root premmision for some apps.
tnx
Click to expand...
Click to collapse
The message will always be there, but if you want to go to twrp just turn off your phone completely and then press the power button + volume up button until your device turnes on.

guy6136206 said:
hey all i just got this phone, i unlocked the botloader and installed twrp from the fastboot.
now when i try to get into the recovery i have this annoying massage "your device has been unlocked and cant be trusted, i dont know what to do anymore, please how can i get into recovery without root premmision for some apps.
tnx
Click to expand...
Click to collapse
I have the same issue unfortunately.
I unlocked my bootloader and I flashed the recovery without any issues, but I cannot access to the oem device infor via fastboot and boot into recovery (via vol + / power or via fastboot).

MatthBouvier said:
I have the same issue unfortunately.
I unlocked my bootloader and I flashed the recovery without any issues, but I cannot access to the oem device infor via fastboot and boot into recovery (via vol + / power or via fastboot).
Click to expand...
Click to collapse
check if twrp version is compatible with your system.
remove USB cable from your phone when you want enter to twrp recovery.

i tried it, it only got into the erecovery.
cant i install the superuser and the room throw fastboot?

i have lt00 emui 4.1 android 6.0 what should i try?
is it a problem if i install the twrp throw boatloader? because the "fastboot devices" didnt recognized my device when it was on so I had to do it Throw bootloader.

hamadazh said:
check if twrp version is compatible with your system.
remove USB cable from your phone when you want enter to twrp recovery.
Click to expand...
Click to collapse
i have lt00 emui 4.1 android 6.0 what should i try?
is it a problem if i install the twrp throw boatloader? because the "fastboot devices" didnt recognized my device when it was on so I had to do it Throw bootloader.

guy6136206 said:
i have lt00 emui 4.1 android 6.0 what should i try?
is it a problem if i install the twrp throw boatloader? because the "fastboot devices" didnt recognized my device when it was on so I had to do it Throw bootloader.
Click to expand...
Click to collapse
active USB debugging from settings > advanced settings >
you can use SRK tool too it make things easy
https://forum.xda-developers.com/mate-8/development/tool-srk-tool-huawei-t3369797

Boot into recovery from fastboot?

Hello, I have an Honor 6x, with unlocked bootloader, and wanted to install TWRP so I booted into bootloader
and flashed twrp.img via fastboot, but now everytime I want to boot TWRP it just shows the message:
Your device has been unlocked and
can't be trusted.
To learn more, visit:
*some link I can't post cause I'm new here*
Your device is booting now...
and then it is stuck in this state...
could I eventually boot into TWRP directly from bootloader via fastboot?
Please help guys, thanks in advance. :fingers-crossed:

What version of EMUI are you on? If you're on the 7.0 beta there isn't a working twrp for it.

jarebear603 said:
What version of EMUI are you on? If you're on the 7.0 beta there isn't a working twrp for it.
Click to expand...
Click to collapse
Indeed, i am on Nougat, is there any way to downgrade?

pt_2001 said:
Indeed, i am on Nougat, is there any way to downgrade?
Click to expand...
Click to collapse
I know for my device BLN-L24 there is instructions on the honor website on how to downgrade.

jarebear603 said:
I know for my device BLN-L24 there is instructions on the honor website on how to downgrade.
Click to expand...
Click to collapse
Hm, can't find it. Where exactly are these instructions?

Hello. Replying here as I don't need a new thread for a very similar issue.
Brand new 6x with EMUI 4. Unlocked bootloader successfully. Using adb/fastboot tool I boot into bootloader, then flash my twrp img. For some reason this goes fine with no errors but takes less than two seconds (cause for concern?).
Now from this point is where I am having trouble. Regardless of what I do, the phone only boots into the EMUI recovery screen. I am aware of holding the volume up key on the first boot after flashing twrp so that it won't be overwritten. I have rebooted the phone manually and also through fastboot while holding the volume up button.
In a new city and only internet I have is thru my phone so this process is really slow due to all the restarts etc. Thanks in advance for the help!

pt_2001 said:
Hello, I have an Honor 6x, with unlocked bootloader, and wanted to install TWRP so I booted into bootloader
and flashed twrp.img via fastboot, but now everytime I want to boot TWRP it just shows the message:
Your device has been unlocked and
can't be trusted.
To learn more, visit:
*some link I can't post cause I'm new here*
Your device is booting now...
and then it is stuck in this state...
could I eventually boot into TWRP directly from bootloader via fastboot?
Please help guys, thanks in advance. :fingers-crossed:
Click to expand...
Click to collapse
i have the same problem with my Honor 6X (BLN-L21) but my phone is stuck at this screen. boot normally, i get that screen. fastboot/rescue mode, i get that screen. recovery, i get that screen. erecovery, i get that screen. aaaand twrp recovery. i get that screen.
also my phone does some weird stuff with the battery level.

Android Nougat and TWRP 3.1.0-2 berlin
MintCrystal556 said:
i have the same problem with my Honor 6X (BLN-L21) but my phone is stuck at this screen. boot normally, i get that screen. fastboot/rescue mode, i get that screen. recovery, i get that screen. erecovery, i get that screen. aaaand twrp recovery. i get that screen.
also my phone does some weird stuff with the battery level.
Click to expand...
Click to collapse
Same problem here. I have a Honor 6x (BLN-L21) with Nougat on it (Build BLN-L21C432B360), unlocked it with the unlock pwd and tried to flash the TWRP (twrp-3.1.0-2-berlin.img) with 'fastboot flash recovery twrp-3.1.0-2-berlin.img'. After that I get always the same message after reboot or if I try to enter the recovery mode.
Any suggestions?
Thank you

Hi there,
I have found it. To get the TWRP Screen I had to press all 3 Buttons (Volume Up, Volume Down and Power) at startup.
Hope this helps.

Sadly this doesn't work here, on a BLN-L21C432B130 with EMUI 4.x and Android 6.x
3 Button start method brings up always the EMUI recovery screen.
Power Button + Volume up Button works fine here with all TWRP versions up to 3.1.0-0, but never on a newer one.
Additional hint: It works only if the USB cable isn't plug into the device and if the phone was powered down before. That must me the reason why I never get that up, if I'm rebootin using the command $ fastboot reboot cause for this the cable connection has to be used

@all who stuck in bootscreen...flash THIS TWRP...

[LG G4 H815] Just need to reboot into recovery directly...
I have kinda the same problem: I flashed TWRP and a friend of mine told me that I need to reboot into recovery directly after flashing TWRP because otherwise the system replaces TWRP again when I type "fastboot reboot". The problem is I cant shutdown the phone and also the key combination of the LG G4 is not rlly working, I tried it dozens of times on my other one... Is there ANY other way of booting to recovery from bootloader / fastboot? Thanks in advance!
P.S.: I read something about "boot twrp.img"... Is that an option or does it just also flash TWRP?

Huawei P9 Brick( The easiest way to unbrick)

1. First Turn off your Device (If you can't then Drain The Battery)
2. HOLD Volume Down & Connect to USB ( Now your phone will boot to fastboot )
3. DOWNLOAD ADB & Fastboot on your Computer. Link - https://mega.nz/#F!sSZDmYiA!RnMmcG88-nvqQj7UNPrPZw
4. Extract your stock firmware via Huawei UPDATE.app Extractor Software (Recovery only)
If you're on Marshmallow Before then extract Marshmallow Firmware
If you're on Nougat Before then extract Nougat Firmware
Huawei UPDATE.app Extractor Software
Link - https://mega.nz/#F!JGh2QLYD!Z1OG8HtbWt1i4XvL6WOt3Q
Now Copy Recovery AND paste into ADB & Fastboot FOLDER
Now DOWNLOAD TWRP
If you're on Marshmallow Before than DOWNLOAD From this link
https://dl.twrp.me/eva/twrp-3.1.1-0-eva.img.html
If you're on Nougat Before than DOWNLOAD From this link
https://mega.nz/#!1HoVmDoa!9ifPg7yfEKfCRfbVI04Qvsbt49PAjA3MO72RoD4EPnc
Now Copy twrp AND paste into ADB & Fastboot FOLDER & Rename twrp
5. Open ADB & Fastboot FOLDER
6. HOLD Shift Key & Right Click on empty place of this FOLDER
7. Click on OPEN COMMAND WINDOW HERE
8. Type - fastboot oem unlock (UNLOCK KEY) --- Skip this step if your BOOTLOADER is UNLOCKED
Now press Enter Key
9. Type - fastboot flash recovery Recovery.img
Now press Enter Key
10. Type - fastboot flash recovery twrp.img
Now press Enter Key
11. Now HOLD Volume Up & Power Button AND Release Volume Up Button when you see Huawei Logo & Just HOLD Vol Up
12. Now flash custom rom
If you're on Marshmallow Before than DOWNLOAD From this link
https://www.androidfilehost.com/?fid=457095661767122613
If you're on Nougat Before than DOWNLOAD From this link
https://www.androidfilehost.com/?fid=889764386195922724
13. Now DOWNLOAD Stock firmware (If you ALREADY DOWLOAD it then skip this step)
14. Extract Your Firmware Copy dload FOLDER & Paste into root Directory of your Memory CARD
15. Go to twrp - wipe - swipe to factory
16. Turn off your phone
17. HOLD Volume Up & Down also Power Button until your Device boot to DOWNLOAD MODE
Now your stock firmware will be installED
Enjoy you unbrick your Huawei P9
Hit the thanks :good: button if you Happy to My Work
Note — If you didn't to use Huawei UPDATE.app extractor Software then check this link
If you didn't now how to flash a custom rom then you should learn it before flashing

Hi,
I was on B386 before (Nougat)
Flashing RR-N-v5.8.4 gives this error:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
Updater process ended with ERROR 7
Any idea ?
Thanks !
PS : This error also prevents me to install B390, B383, B182. Only B360 can be installed from TWRP.

XavierP56 said:
Hi,
I was on B386 before (Nougat)
Flashing RR-N-v5.8.4 gives this error:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
Updater process ended with ERROR 7
Any idea ?
Thanks !
PS : This error also prevents me to install B390, B383, B182. Only B360 can be installed from TWRP.
Click to expand...
Click to collapse
Try to install Lineage 14.1

problem
my p9 i do the things as you saying but it when it goes on fastboot stack on screen your devise is booting now...wont open and at adb says waiting for devise nothing else what to do ?

To get into fastboot mode you keep the phone plugged into computer and hold power and volume down until you get to the white fastboot screen.
There is no need to wait for the battery to drain as you can just force shut down a phone using power + volume down holding.

Huawei p9 EVA-L09
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.

Follow my guide, post #7! Leave feedback and a thanks!
https://forum.xda-developers.com/showpost.php?p=74169408

phone is booting but screen doesnt turn on
the phone is booting and dload method is working but the issue is the screen is just blank after huawei logo but is not in loop as it is not booting continuosly its blank forever

nothing helps
Hi
I came here because i tried to install miui on my P9 via trwp , somehow it wasnt mountable and after searching the internet i found the solution was to change the filetype.
Sadly i forgot that this would delete my backup, which happened and the miui still wasnt mountable.
I tried your method but after a few miliseconds of the forced update it gets an error and stops.
Or lets say i tried your method while being in trwp recovery mode because otherwise no devices are being detected by adb tool.
i tried to install a p9 stock rom but i cant even mount that one, somehow nothing works.
I seriously dont know what to do anymore.

Try this...
Try to flash downgrade firmware...
Rollback Instructions
Step 1. Download the appropriate rollback firmware
Step 2. Copy the extracted dload folder to the external storage of your phone (micro sd card).
Step 4. Disconnect the USB cable and turn your phone off.
Step 5. Now hold Volume up + Volume down + Power buttons until the installation screen appears.
Step 6. When the phone restarts after completing the installation, your firmware version should now be “B300”.
Step 7. Try to find oldest marshmallow firmware and flash it using same way...

I want to android 6.0 as twrp. How ? Pls

That is only for unlocked bootloader??

Link in Step 12 for Nougat s broken

JaayTee said:
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Click to expand...
Click to collapse
Same problem plzzzzzzzzzz help!!!!

I can't access anything but "your device is booting now" screen - after this phone automaticly shuts down
pls help!!!

Trying to follow the guide but cannot even get to fastboot mode.
Trying to follow the guide but cannot even get to fastboot mode.
With phone off and pressing down-vol and power, it gets straight to:
Func NO: 11 (recovery image) Error NO: 2 (load failed!)
Am i doing something wrong? Help appreciated.
Cheers

Bricked p9
Blak Rider said:
Same problem plzzzzzzzzzz help!!!!
Click to expand...
Click to collapse
JaayTee said:
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Click to expand...
Click to collapse
Hello
I have exactly the same problem.
OTA with dload doesnt work - dont load ota recovery,just huawei logo loop
fastboot recovery is booted, but when I try steps in main thread I getting Error : Command Not allowed even if I try unlock the bootloader.
Do have somebody solution for it? Every idea is good. I dont want to put this phone to the trash
Thank You

mdoom said:
Hello
I have exactly the same problem.
OTA with dload doesnt work - dont load ota recovery,just huawei logo loop
fastboot recovery is booted, but when I try steps in main thread I getting Error : Command Not allowed even if I try unlock the bootloader.
Do have somebody solution for it? Every idea is good. I dont want to put this phone to the trash
Thank You
Click to expand...
Click to collapse
In Fastboot, is it FRP locked and/or Bootloader locked?

zgfg said:
In Fastboot, is it FRP locked and/or Bootloader locked?
Click to expand...
Click to collapse
both are locked.
When i try to unlock bootloader,i getting the error message.
FRP lock is not possible to unlock becouse phone dont wont start.
any chance?

mdoom2 said:
both are locked.
When i try to unlock bootloader,i getting the error message.
FRP lock is not possible to unlock becouse phone dont wont start.
any chance?
Click to expand...
Click to collapse
That's the problem, when playing with ROMs you must take carw that you keep OEM Unlocked.
Maybe DC-Unlocker (paid) can help
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial

[GUIDE] Root Huawei Honor 8 Lite and install TWRP custom recovery (EMUI 5.X)

Note-
Applicable for Windows 7, Windows 8 and Windows 10
Similar steps are applicable for EMUI 4.X as well but TWRP file will change.
Hi Folks,
Just adding this guide for rooting method for Honor 8 Lite. This was tested by one of the user referring my original guide for Honor 6X and confirmed this is working absolutely fine. I will just simplify the steps so that any new users can do this without any problem and without any prior experience to rooting, it may be long but will be the simple enough for all the users.
Prerequisites-
Enable the developer option in settings-
Go to Settings--> About Phone-->Tab build number 7 times to enable this setting.
Go back in setting page, just above system update, you will see a new menu as -Developer Options
Scroll for the debugging section and enable the USB Debugging
You will be prompted for the confirmation with RSA key, just accept it.
Enable OEM Unlock in Developer Options (just above the USB debugging option) – Most probably this option will not be there on EMUI 5.0 (only few have seen on EMUI but it was there on EMUI 4.1 for all but rarely on EMUI 5.0)
Please note down you build number, this may become handy in case something goes wrong to restore your phone via DLOAD. In Settings- About phone- Build Number
Installation of required Drivers.
Connect your phone to PC and install Hi Suite on PC and it will additionally install all the necessary drivers to PC and HiSUite on Mobile.
Download and Install ADB from Link
Accept all the prompts and install ADB drive system wise.
Once installation is completed, if default options are chosen, it will be under C:\adb
Downloading the necessary files.
Download TWRP from Link Thanks to @OldDroid for his Original Thread and @surdu_petru & @XePeleato- This was not possible without their excellent work.
Move the downloaded file under C:\adb or wherever you have installed the ADB.
Download the SuperSU file from this Link and put it in SD card or keep handy on PC so that you can copy to internal memory later.
Get the unlock as mentioned in this thread
Actual Procedure
Unlocking the bootloader-
Backup all your data as unlocking the bootloader will reset the device and all your data will be erased.
On windows machine, go to folder C:\adb or wherever you installed the adb drivers.
Press shift+right click together and select Open command prompt here (it will be open PowerShell here on Windows 8 and Windows 10 machine)
Run - adb reboot bootloader (this command may prompt for acceptance of RSA key if not already accepted)
This will boot the phone into bootloader mode.
Run - fastboot oem unlock <16 digit unlock code- Put your actual code you obtained from Huawei site > (This step will unlock the bootloader and will erase all your data)
Phone will restart automatically.
Installing TWRP
Once on the system, open the PowerShell or command prompt again in ADB folder (can use the previous instance as well)
Run - adb reboot bootloader
Once in bootloader, Run - fastboot flash recovery twrp-3.1.1-0-berlin.img (This will install the TWRP recovery for EMUI 5.0 on your phone)
Once done with the flashing the TWRP, Run - fastboot reboot
Rooting
Once booted to system, open the PowerShell or command prompt in ADB folder (can use the previous instance as well)
Run - adb reboot recovery
And your phone will boot into the TWRP recovery by Open Kirin Team.
Copy the SuperU file downloaded to SD card or Internal memory.
Install the SuperSU zip.
Reboot and enjoy the complete ownership of the device with root permission and happy Flashing the custom ROMs
Video tutorial by @PaulR11 here for 6X, this will remain the same.
https://youtu.be/blPs9FOsaHE​

If I want to install magisk on stuck rom should I follow this solution ?
Any chance to root without unlocking boot rom?

I followed the instructions but my phone reboots itself continuously and does not boot to system. Any ideas?

kareemhafez87 said:
I followed the instructions but my phone reboots itself continuously and does not boot to system. Any ideas?
Click to expand...
Click to collapse
remove the USB cable and hard boot it. if needed, do factory reset.

Honor 8 lite bootloop
kareemhafez87 said:
I followed the instructions but my phone reboots itself continuously and does not boot to system. Any ideas?
Click to expand...
Click to collapse
Hi, am also having the same problem here! I unlocked the bootloader okay, flashed twrp okay, but when flashing SuperSU I got multiple errors at the end of which when I restarted the system my phone started to boot loop. Its now showing Huawei eRecovery but am getting the message "Getting Package info Failed". How do I recover from this???

Mr Tots said:
Hi, am also having the same problem here! I unlocked the bootloader okay, flashed twrp okay, but when flashing SuperSU I got multiple errors at the end of which when I restarted the system my phone started to boot loop. Its now showing Huawei eRecovery but am getting the message "Getting Package info Failed". How do I recover from this???
Click to expand...
Click to collapse
https://forum.xda-developers.com/p8...eturned-to-stock-rebranding-gr3-2017-t3749832 you can try this method

player98343 said:
https://forum.xda-developers.com/p8...eturned-to-stock-rebranding-gr3-2017-t3749832 you can try this method
Click to expand...
Click to collapse
Hi, thanks for the reply. This post seems to be about the GR3 2017, however I am using the Honor 8 lite...

Mr Tots said:
Hi, thanks for the reply. This post seems to be about the GR3 2017, however I am using the Honor 8 lite...
Click to expand...
Click to collapse
it's the same device

move apps to SD
Can you move apps to SD with rooted Huawei Honor 8 lite?
I am deeply unsatisfied that you simply cannot move apps to SD on this phone, and now I can't even update my system because there is no enough space to download the update...

How

Souvik 05u said:
How
Click to expand...
Click to collapse
??

player98343 said:
https://forum.xda-developers.com/p8...eturned-to-stock-rebranding-gr3-2017-t3749832 you can try this method
Click to expand...
Click to collapse
-is this method working? im stucked too. im using huawei nova lite PRA-LX2

nazrin16 said:
-is this method working? im stucked too. im using huawei nova lite PRA-LX2
Click to expand...
Click to collapse
You can try what I know is nova lite is also p8 lite 2017 but it will change your device to pra-lx1

Is this working for honor 8 lite with emui 8.0, or i just need to change twrp but the steps are the same?

LukaSenpai said:
Is this working for honor 8 lite with emui 8.0, or i just need to change twrp but the steps are the same?
Click to expand...
Click to collapse
Steps will remain same, you need twrp for oreo and camt confirm of SuperSU is working but you cam try magisk

magisk link
shashank1320 said:
Steps will remain same, you need twrp for oreo and camt confirm of SuperSU is working but you cam try magisk
Click to expand...
Click to collapse
Hi, can you post the link to magisk to be used? I have EMUI 8.0
Thanks a lot