Database Info

[Q] Stuck on fastboot with broken pwr button

Hi I have the following problem: after I flash Cannibal open touch recovery I could not flash any .zip file so I decided that I go back to CWM touch so I restarted my phone. Phone booted into fastboot mode with the following message no boot or recovery IMG so I decided to flash recovery with fastboot. I opened the folder with fastboot command flash_recovery connect the phone to usb but the command line always showed waiting for device. I unplugged the phone and tried to press the volume keys but nothing happened as if it freezes. I pulled the battery and try it again but no response. I cant connect phone to odin because it has broken power button and after I insert the battery it always turn on itself. Please advise me what to do thank you.

Seems your drivers have gone corrupt. Try a different system and use Nexus Root Toolkit.

I tried this option but without success. Phone does not respond to anything. No volume up or volume down. It´s just stucked on bootloader.

This link says that if you get <waiting for device> , then fastboot is not configured properly. Check out the link over here.
You may also try this command "fastboot boot recovery-clockwork-6.0.4.3-crespo.img" to boot into recovery without installing it.

no hope

The reason you cannot navigate in fastboot/bootloader is that your powerswitch is probably stuck in the "on position"...does your device immediately power on when battery is inserted?
The way i solved this a few months ago was to completly remove my powerswitch from the board power my device on..use quickboot to enter fastboot menu and input commands...
Also completely removing your power button makes powering on your nexus alot more complicated.
what i did was go to download mode (holding vol+ and -) and pluging phone in..this takes you to download mode
then you need to get a copy of a boatloader file to flash via odin which will reset your phone and power it on...pm me if interested i can provide you with files necessary

PLEASE HELP! Bricked Honor 8

Hi,
I was trying to flash TWRP, but now I am stuck with flashing TWRP logo after rebooting or powering the phone on.
I am unable to get to the fastboot.
STEPS I did before brick:
1. unlocked OEM via official way
2. flashed TWRP
3. after that my phone was reset however most of the apps was missing, I was trying to do factory reset once again but it failed with the message "Data partition was heavily damaged"
4. I re-locked EOM
5. brick as mentioned above
Please help, I have the phone only two weeks and I have no idea how to fix this without fastboot.
Thank you.

Meiton said:
Hi,
I was trying to flash TWRP, but now I am stuck with flashing TWRP logo after rebooting or powering the phone on.
I am unable to get to the fastboot.
STEPS I did before brick:
1. unlocked OEM via official way
2. flashed TWRP
3. after that my phone was reset however most of the apps was missing, I was trying to do factory reset once again but it failed with the message "Data partition was heavily damaged"
4. I re-locked EOM
5. brick as mentioned above
Please help, I have the phone only two weeks and I have no idea how to fix this without fastboot.
Thank you.
Click to expand...
Click to collapse
Sounds like you flashed the 3030 version of TWRP. Download the 3020 version and put it in your fastboot folder. Plug in the USB to PC
Hold power and volume up untill the phone reboots. While it's still off immediately change to power and volume down and hold till it goes into fastboot (bootloader)
Now fastboot flash recovery TWRP.img
With the 3020 version.
Unplug the USB and hold power and volume up until it says the phone is booting.. let go and TWRP will load.
Go to Wipe / format data / type yes
Reboot to system and your all set
Sent from my Nexus 6P using Tapatalk

clsA said:
Sounds like you flashed the 3030 version of TWRP. Download the 3020 version and put it in your fastboot folder. Plug in the USB to PC
Hold power and volume up untill the phone reboots. While it's still off immediately change to power and volume down and hold till it goes into fastboot (bootloader)
Now fastboot flash recovery TWRP.img
With the 3020 version.
Unplug the USB and hold power and volume up until it says the phone is booting.. let go and TWRP will load.
Go to Wipe / format data / type yes
Reboot to system and your all set
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
So I've tried that but the phone is still booting to recovery (flashing TWRP logo) no matter what.
Basically the phone is always on now because if hold the power button (or any other combination) for a few second it will just reboot back.
I have an access only to ADB, but I am not able to boot to bootloader at all, it seems the bootloader is damaged somehow.
Also that warning about unlocked OEM doesn't have that text saying "hold volume up to boot to recovery" etc. like before brick.

Hi there,
Try using the Huawei Multi Tool with the Unbrick option : https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923
Speaking from experience, this little fellow helped me recover my phone when I bricked it ON DAY ONE after failed root attempt... (Derp)
Let me know if it helped you
(Leave a thanks if it did )
EDIT : This tool is also useful if you want to get lazy whilst rooting. I use it constantly when flashing diffrent bits and pieces

Clearly follow My steps To unbrick and get normal device ::
Step 1 ::
Download the full firmware of your device.
Step 2 :
make sure that your bootloader is in unlocking state
Follow the video blindly ::: https://youtu.be/OMKDnBqbi3U?list=PL...eT9J26lkefvVkK
don't panic of mobile.
Step 3 :: done ..enjoy u did it
--------------------------------------------------------------------------
If you bricked on nougat then follow the below steps
step one :::
download the downgrade package to mm .
then extract the zip and open the update.app using HuaweiUpdateextrator in that select recovery and extract
1.now, boot your device into fastboot and flash the recovery (Optional)(try this if it said incompatible version on recovery)
2. on your sd card and make a folder "dload" . and copy the update.app which we have extracted earlier
3.the switch off the device and press all three buttons you will be reboot into recovery and done . you device will be okey

Meiton said:
So I've tried that but the phone is still booting to recovery (flashing TWRP logo) no matter what.
Basically the phone is always on now because if hold the power button (or any other combination) for a few second it will just reboot back.
I have an access only to ADB, but I am not able to boot to bootloader at all, it seems the bootloader is damaged somehow.
Also that warning about unlocked OEM doesn't have that text saying "hold volume up to boot to recovery" etc. like before brick.
Click to expand...
Click to collapse
Booting to the bootloader is just a timing issue
Phone must be hooked to PC with USB
And volume up and power till it goes black
Then immediately volume down and power and Hold untill the bootloader loads
Keep trying until you get it
Sent from my Nexus 6P using Tapatalk

clsA said:
Booting to the bootloader is just a timing issue
Phone must be hooked to PC with USB
And volume up and power till it goes black
Then immediately volume down and power and Hold untill the bootloader loads
Keep trying until you get it
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
I appreciate your help but I've tried it multiple times always with the same result.
I also can use "adb reboot bootloader", but it will reboot again to stuck recovery.

DJ Daemonix said:
Hi there,
Try using the Huawei Multi Tool with the Unbrick option : https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923
Speaking from experience, this little fellow helped me recover my phone when I bricked it ON DAY ONE after failed root attempt... (Derp)
Let me know if it helped you
(Leave a thanks if it did )
EDIT : This tool is also useful if you want to get lazy whilst rooting. I use it constantly when flashing diffrent bits and pieces
Click to expand...
Click to collapse
I've tried that, but I am still stuck as that tool is using fastboot as every other tool to flash .img files.
Thank you for the tip though.

Plug phone into computer with USB, then hold down power + volume down until it eventually boots into bootloader. I had the same scenario as you and that's how I got into the bootloader. You can flash either a good TWRP or the stock recovery, either one will work.

Infinix HOT 3 X-554 , encryption unsuccessful after updating recovery with fastboot

Hello,
I need help regarding the INFINIX HOT 3 X-554
I downloaded the phone's custom TWRP recovery (I can't post the link but I got the recovery from androidhq254), and put the phone in fastboot (download) mode, then flashed the recovery image using the following command (fastboot)
fastboot flash recovery recovery.img​The process was successful , but when I rebooted the device, I got to the encryption unsuccessful screen with a reset phone button. Pressing this button reboots the phone but it only shows the infinix logo and nothing else.
What I have tried.
Tried the Volume down and power combinations to boot into recovery with no avail ( stays at the infinix logo forever)
Tried detecting the device using fastboot and adb and can't see it (while its in the encryption unsuccessful, screen)
Tried using SPFlash tool on 2 PCs (win8.1 and 7) to no avail. (using original USB cable)
Help
I don't understand why I can't get into recovery in this phone, any help in getting the recovery up, or any hacks or tips are appreciated.
I think that the device is still "great" as it charges and indicates that when powered off and connected to charger or cable, so I am positive this is not a brick
Note
The phone charges normally when connected to charger or USB
I had never booted into the stock recovery
USB debugging was enabled when I did the fastboot flash recovery command
I did install VCOMM drivers on the two PCS I tested with, but SPFlash tool never saw my device, (I followed instructions to turn the phone off, play with removing and inserting the battery etc.)

[HONOR 6X BLN-L21] Honor 6X comletely bricked

Hello there,
i had an camera issue on my Honor 6x (EMUI 5 B369), thats why I made a Rollback to EMUI 4(B130). After doing that properly with that files:
http://download-c.huawei.com/download/downloadCenter?downloadId=94070&version=376169&siteCode=de-h From Bxxx to B300 (only contains some .img (See Attachment))
and http://download-c.huawei.com/download/downloadCenter?downloadId=94087&version=376224&siteCode=de-h From B300 to B130 (full Update.app)
After being on EMUI 4, I wanted to dload back to B369, but then I accidentally flashed the B300, which only contained some .img.
Then it went into softbrick mode, so I only was able to boot into fastboot.
To flash anything I unlocked the bootloader. The Device turned off and back on, then wanted to boot to recovery for hard reset.
This is where I am now. I can not boot into any mode. It just turns on and then shows the "Your device has been unlocked and cant be trusted". I tried to go into dload mode, tried recovery, tried fastboot, none of them were working.
When force rebooting it just turns on, vibrates 2 times and shows that "Your device..." screen and "Your device is booting now"
To archieve that it forgets that process to boot into recovery i let the battery drain empty and try again, which partly worked. Now sometimes it doesnt show "Your device is booting now" on the "Your device..." screen, but it shows the three options that are normally shown when turning on with opened bootloader.
But still no success into fastboot etc.
Edit: My phone seems to be not charging anymore, because ist shows that booting stuff, but then turns on and shows the "Your device..."-screen
Is there any way to unbrick my Honor 6X BLN-L21C432?
Greetings, LRX
PS: plss help me

I didn't understood a thing; actually, you have access to fastboot mode or not? And if yes, what's the status of FRP and Phone in fastboot... Lock or unlocked?
Try to go in fastboot mode by pressing the volume down + power on buttons while your phone is connected to a PC USB port. If this shouldn't work, i had read something online that says that there is a chance to flash an image through HiSuite; never tested, so i can't ensure that it'll works... But we'll try to find out a way to unbrick your device

:crying: same problem shows on my mobile if you found any solution please share with me my device also in same state

same here ... my BLN-L21 is bricked. Can't access to recovery, no fastboot, no e-recovery. any connection with PC !
I have disassembled the phone and looking for schematic testpoint but no result for now
---------- Post added at 10:44 AM ---------- Previous post was at 10:41 AM ----------
LRX22G said:
Hello there,
i had an camera issue on my Honor 6x (EMUI 5 B369), thats why I made a Rollback to EMUI 4(B130). After doing that properly with that files:
http://download-c.huawei.com/download/downloadCenter?downloadId=94070&version=376169&siteCode=de-h From Bxxx to B300 (only contains some .img (See Attachment))
and http://download-c.huawei.com/download/downloadCenter?downloadId=94087&version=376224&siteCode=de-h From B300 to B130 (full Update.app)
After being on EMUI 4, I wanted to dload back to B369, but then I accidentally flashed the B300, which only contained some .img.
Then it went into softbrick mode, so I only was able to boot into fastboot.
To flash anything I unlocked the bootloader. The Device turned off and back on, then wanted to boot to recovery for hard reset.
This is where I am now. I can not boot into any mode. It just turns on and then shows the "Your device has been unlocked and cant be trusted". I tried to go into dload mode, tried recovery, tried fastboot, none of them were working.
When force rebooting it just turns on, vibrates 2 times and shows that "Your device..." screen and "Your device is booting now"
To archieve that it forgets that process to boot into recovery i let the battery drain empty and try again, which partly worked. Now sometimes it doesnt show "Your device is booting now" on the "Your device..." screen, but it shows the three options that are normally shown when turning on with opened bootloader.
But still no success into fastboot etc.
Edit: My phone seems to be not charging anymore, because ist shows that booting stuff, but then turns on and shows the "Your device..."-screen
Is there any way to unbrick my Honor 6X BLN-L21C432?
Greetings, LRX
PS: plss help me
Click to expand...
Click to collapse
Do yo have the red light ? and red charging logo before boot ? I have charge my battery yesterday out of phone (to see if out of battery change boot option). And try boot fastboot / recovery / erecovery with plug and replug battery but no success. Still same

Try to boot into fastboot mode. If you disconnected phone battery, connect it again. Unplug the phone from USB cable. When powered off, hold Vol down key (and only hold that key), then plug your phone to your computer (be sure to hold Vol down until you reach fastboot screen).
If you reached fastboot mode, then flash the RECOVERY.img image from B130 to the recovery partition.
If successful, unplug your device, then reboot.
When rebooting, hold Vol Up and Power button until you see the boot warning saying that you're booting to recovery mode or something like that (the screen won't show any other options to boot as a regular boot should, so that will be an important indicator).
If you reach the recovery screen, then try to dload full B130 firmware.
If this fail, try another flashing combinations. I mean:
1- Try dloading another firmware (e.g. the B369 firmware you downloaded) over B130 recovery.
2- If step 1 failed, flash B369 RECOVERY.img, then try to dload B130 package. If this don't work, now try to dload B369.
3- If previous steps failed, try to flash RECOVERY.img from THE DOWNGRADING PACKAGE (the one with few IMGs). After that, dload B130.
If this don't work, is because your soft brick is a real pain in the ass.
Cheers, and good luck.
PS: don't miss your hope. I achieved to recover my bricked phone with FRP locked (FRP doesn't let you flash anything at all), and a warning screen with RED letters, and a big exclamation mark, saying that the phone was not able to boot.

try dloading the correct firmware.dload works most of the time.

there is no way to enter in dload, recovery or fastboot. i try all methods but no luck. please is here any one know that can we access flash IC?

Ounly one possibility is using "testpoint" on motherboard mobile (Huawei USB COM 1.0 port in PC) with DC Phoenix and than HCU (19€). I had the same problem , I have repared it
1. Unbrick tutorial: you can find it on webside dc-unlocker ((ALL new users prevented from posting outside links in their messages)
2. Repair oeminfo and custom.bin tutorial: you can find it on webside hcu-client (ALL new users prevented from posting outside links in their messages)
I have the picture Testpoint Honor 6x BLN-L21.jpg
Send mi private message.
Good luck...

power off the device hold the vol down connect data cable to pc it will show fastboot then flash twrp then reboot to twrp flash custom rom.

Impossible to reboot to TWRP from fastboot...
- Install russian MultiTool 8
- download rollback package (Android 6, EMUI 4.1, 1.76GB ) then extract dload folder into SD Card and put sd-card in phone
- Connect USB cable to PC, power off phone, keep pressed Vol- then plug USB cable, phone start in Fastboot Mode
- From MultiTool flash Recovery and eRecovery 1.x version
- Power off phone
- Reboot pressing Vol+,Vol-, Power and wait...

Bricked Huawei P9 Lite - Stuck in Boot Screen

Hello,
as the title says... I bricked my phone. In the past, I successfully installed LineageOS on my old Galaxy S3. I got a used Huawei P9 Lite recently and wanted to install a custom ROM. Here's what happened:
1. Unlocked the phone
2. Accessed Fastboot mode
3. Installed TWRP* via fastboot flash recovery file.img
4. This didn't work and I read on the web, I could try to flash revocery2 with fastboot flash recovery2 file.img
5. This didn't help either, so I decided to cancel my plan and use the manufactorer's system since the system still booted (of course, I didn't install any custom OS).
6. The phone told me on each startup it's unlocked. I didn't need the unlock anymore, so I accessed the Fastboot mode again.
7. I re-locked the system by using fastboot oem relock password.
8. The phone asked me to do confirm this action and do a factory reset
9. After this, I'm stuck at the Huawei logo and can't access Fastboot mode anymore!
When I shut down the phone, it immediately restarts itself. No chance to get into Fastboot mode again, which I did through pressing Vol- and plugging in an USB cable.
*I tried several versions, 3.0.1 and 3.2.1 since no version worked
This may be a beginner's fault, my last phone was already unlocked and I had not a single problem back then. But this time... I hope you can help me.
What would happen if I let drain the battery down to 0% - the phone wouldn't restart of course. If I press Vol- and plug it in, would I come back to Fastboot mode or would it stay in this loop?
Any help is appreciated!