I cracked my screen (while it was in the pocket of my jeans). Anyone know where I can find replacement screen? Is it easy to change it?
Thanks
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Philippe_Raimo said:
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Click to expand...
Click to collapse
Thank you very much, I will look into this one.
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Look for an original AUO H380VL01 or HTC Touch HD Sharp matrix... It's reported to be compatible with our phone
cracked screen too
baddentist said:
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Click to expand...
Click to collapse
i have the same thing with my acer screen (cracked in my jeans)
i buy one on ebay (i m waiting the screen)
can you tell me how to do to change the screen ? it's easy?
(sorry for my bad english)
ok it s done
i recieve my lcd screen with tools and i change it
it's easy
the screen is ok thanks for xda and all of you for existing
(sorry for my bad english)
I installed mine today -after 6 months with broken screen- I bought lcd for HTC Touch HD T8282.It is far more cheaper than the acer one and fits perfectly.ebay item 290424248491.
The HD screen is the same of NeoTouch?
I've paid 70€ for a screen for newTouch, but your proposition is more good: 50€!!
Are you sure it's good for Acer? My touchscreen is OK...
Im using it since last friday. its perfect
I received my screen today, but it's difficult to open this mobile phone!
I remove 5 screw on sur back of the phone, but i don't know what remove
There are two more screws at the left and right sides of battery house
littlbox said:
Im using it since last friday. its perfect
Click to expand...
Click to collapse
i have the same prob.... i dropped my phone and my screen blanked ....and i need another lcd .... i was thinking about what you did.... but if i'll get the HTC one the front of the mobile will be with HTC logo instead of the ACER one ...
right?
screen now fixed
I took my phone in to a local shop and they were able to change out the screen using an HTC HD screen (yes, the exact same screen as the neotouch). All is fine with the screen. They messed up the power button, but that is another story. I watched the guy do this and it seemed like a hell of a lot of intricate work to do yourself. I was happy to pay the $120. Now, I just need to return and get them to redo the power button (installed it incorrectly when putting it all back together).
For those adventurous enough- go for it, but I suggest the cheaper HD screen. And no, only the screen was replaced, which is under the touch screen/digitizer that actually has the acer logo. All looks as it did before.
I took my neotouch for a motocycleride in the rain. It didn't like it too much and now the touchfunction is messed up on parts of the screen. It all displays as it should but I can't use parts of the screen. I should be allright with just replacing the digitizer right? Ebay item Item number: 170518652337
Hi, the same for me.
Touch doesn't work on some area.
Need change digitizer or LCD?
Antenna gps
Hi someone tell me where it's possible to buy a part "gps antenna "?
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
darks1de said:
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
Click to expand...
Click to collapse
Hi,
this didn't work in my case. After replacing my broken original lcd screen with a new lcd display (eBay - No. 120608475783, Original HTC Touch HD LCD Display T8282), I can see that the display is switched on, but it doesn't seem to receive any signal (like you turn on your pc monitor but not the pc). Now I have two questions:
1.) If only the lcd display is broken - should I still see something on the display? Because on my broken display, I only have a black and a white part and some coloured stripes, mostly where the display is broken.
2.) Is it possible that there is something more broken on my NeoTouch or did I simply receive a broken lcd panel? It did fall off the couch, completely flat on the display.
fyi: the new lcd was missing some isolation (on the flexible part with some electrical components) which was present on my original lcd. I used some sticky tape as a replacement because it is directly positioned over some other electrical components on the phone when in place.
New Info:
Everything except from the display seems to be fine - when it is connected to my PC running "My Mobiler". But I have seen pictures of mobiles with a cracked screen whre you were still able to see (partly) the homescreen, etc. On mine, I am not able to see anything while the cracked screen is mounted - only white and black parts and some colored stripes...
Update: The delivered display was broken. Yesterday I received a new one which works perfectly!
many thanks in advance
TrashX
aih, the same story with my f1
anyway could you suggested seller lcd f1 on ebay???
i'm afraid if wrong order with lcd resolution under wvga,,,
some seller show resolution from their prodocut and a lot of seller don't do that,,
please help me..
Hi Guys hope you can help with a few technical issues
Just had my screen replaced (just the outer glass cost £60) and the guy said that they had to replace the sensor as well (the one at the top of the screen that controls the backlight for the home, menu… buttons).
Now the back light for the buttons does not work so I went back to the shop and they said that it wouldn’t due to the screen they used!!!!!!!
I tried to remain calm and said that that should have been explained before the work was carried out now he wants a further £90 to take a screen off another phone and put it on mine to make the sensor work…..
Does this mean he used a substandard screen and the sensor should work no matter what screen they used where do I stand legally?
thanks
Steve
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Hi Devs, Members and Guests, how you doing? To be honest I was doing well until my LG G2 cracked on the top just a bit and now I can't pull my notification bar or do any operations on the top of the phone...
I re-created with Paint what happened to the top of my phone:
((check the attachment of "How My Phone Is.jpeg"))
The red and orange is exactly where the crack of the phone is, not that thick, however it's noticeable. The black marked area is where you the phone does not operate (you touch it and it doesn't do anything). The green line is safe area. Also, I'm running CM11 (recommended for any LG G2 users) with TWRP and runs very good.
Now the problem is that I really need my phone fully working again.. It works but I have to do some weird stuff so I can at least text someone. So here I got some questions that you guys can help me out:
1) How much you guys think it is to fix the screen?
2) Is it possible to change the resolution or the display in the phone so it will be displaying the ROM in the working area of the phone? Here is what I mean by that:
((check the attachment of "Question.jpg"))
3) Any other solutions you guys got?
Thanks for all of you who read and those who can reply and help. Have a good day
First off, fixing the phone will cost you, if you do it yourself, around $60-$70 bucks. That is for the LCD+Digitizer+mid body assembly. And that is by far the easiest way to repair the phone. You just switch all your internal parts from your old assembly over to the new assembly and pop your back cover on. Easy breazy. I just did this myself and my phone is now working great. As for your second question about changing the resolution, no. You can change your resolution but it will not "shrink" your screen to the usable portion. Your only option is to replace the LCD and Digitizer.
Before you burn me at the stake, I know the title is vague, but I do have a few questions I need answered if possible.
First things first, I have an Alcatel Pop One Touch C7. You're probably not familiar with the phone but I don't think it actually matters in this case.
Now, I dropped my phone a couple of weeks ago, and while the screen didn't crack, it is definitely not working properly. What I think happened is that the cable connecting the display to the phone is slightly dislodged. The screen shows washed up colors and seems to lag when trying to display a new "frame", for example when I type in something and the screen slowly fades in said something. I'll post pictures as soon as I can.
I tried opening the phone, but when I unscrewed the back, I saw this sticker going from the battery slot all the way to the board.
I watched a few videos showing how to "unstick" the sticker, but I don't have a heatgun or tool that can help me do so.
My question is:
Do you think this sticker is important to the phone, or can I just rip it out or cut it?
Thanks in advance
shadyeversince said:
Before you burn me at the stake, I know the title is vague, but I do have a few questions I need answered if possible.
First things first, I have an Alcatel Pop One Touch C7. You're probably not familiar with the phone but I don't think it actually matters in this case.
Now, I dropped my phone a couple of weeks ago, and while the screen didn't crack, it is definitely not working properly. What I think happened is that the cable connecting the display to the phone is slightly dislodged. The screen shows washed up colors and seems to lag when trying to display a new "frame", for example when I type in something and the screen slowly fades in said something. I'll post pictures as soon as I can.
I tried opening the phone, but when I unscrewed the back, I saw this sticker going from the battery slot all the way to the board.
I watched a few videos showing how to "unstick" the sticker, but I don't have a heatgun or tool that can help me do so.
My question is:
Do you think this sticker is important to the phone, or can I just rip it out or cut it?
Thanks in advance
Click to expand...
Click to collapse
Hello, thanks for using XDA Assist!
Please post your question here:
http://forum.xda-developers.com/android/help
Good luck!
Thread closed.
Hello there,
Anyone who is in the know pertaining cube talk 9x U65GT/16GB /3G(white), S/N 14309300615
issue:
I have this Cube tablet talk 9x touch screen replaced for the second time, but this time round , it came with a black digitizer, i thought every thing was fine and dandy, after a while about half an hour later, the touch screen did not work smoothly , scrolling /swiping was not smooth, could not zoom in and out the way it should be. The seller from Aliexpress said it will work fine when update the rom, and i ask for any rom that is available , no reply till now. Anyone who can help me, see questions below, i need to confirm before making a complain to Aliexpress on this seller, do want to be accusing the person for the wrong reason:-
1. Is it screen or ROM issue?
2. Any difference between a white and a black screen?
3. If it is ROM issue, can anyone who can guide me to the proper site to get it.
4. If it is black screen meant for 32GB, does it mean it can only be use on the 32GB unit.
need some help here, at least i need know whether it is screen or rom issue?Previous replaced screen was white one with no problems, the second one given me the problems
jamesu67 said:
Hello there,
Anyone who is in the know pertaining cube talk 9x U65GT/16GB /3G(white), S/N 14309300615
issue:
I have this Cube tablet talk 9x touch screen replaced for the second time, but this time round , it came with a black digitizer, i thought every thing was fine and dandy, after a while about half an hour later, the touch screen did not work smoothly , scrolling /swiping was not smooth, could not zoom in and out the way it should be. The seller from Aliexpress said it will work fine when update the rom, and i ask for any rom that is available , no reply till now. Anyone who can help me, see questions below, i need to confirm before making a complain to Aliexpress on this seller, do want to be accusing the person for the wrong reason:-
1. Is it screen or ROM issue?
2. Any difference between a white and a black screen?
3. If it is ROM issue, can anyone who can guide me to the proper site to get it.
4. If it is black screen meant for 32GB, does it mean it can only be use on the 32GB unit.
need some help here, at least i need know whether it is screen or rom issue?Previous replaced screen was white one with no problems, the second one given me the problems
Click to expand...
Click to collapse
Greetings and welcome to xda. If you ask your question in this thread
http://forum.xda-developers.com/showthread.php?t=2765392&page=28
The experts there will be able to guide you
Good Luck
Sawdoctor