Related
Hi guys, I'm new here.
I have a problem... And I have tried very hard to find a fix over the past few days, but no result. So here I am.
I have a HTC Hero, which was running Android v2.1-update
I rooted it, and used a corrupted rom.
Now I cannot use it. When I start the phone, it takes ages to load, then I am presented with a strange unlock screen. I unlock it, and I am presented with a white HTC-Logo screen. If I wait long enough, a menu appears asking me which update to apply. I select the first, and I am given a choice of 3 languages. I select English, and hit Next. This is where I am stuck. I have an o2 simcard (which works fine) and it doesn't detect it. It keeps asking me to insert the simcard with an animation on how to do this.
I'm not sure if this could be called "Bricked" as I don't really know the meaning of the term, but either way, a Brick is the only thing it's good for right now.
I am desperate for some help. I have just bought it and am feeling kinda sick now. I learned my lesson. Don't Root!
Thanks in advance!
Well..."don't root" is not really a lesson, just when you do something next time, you have to make sure that you are doing everything correct, and following 100% the guides that you find here in XDA..
My Hero is rooted since I bought it...
Anyway, Do you have recovery installed? Amon RA or clockworks?
To find it out, just turn off you phone and press Home+Off button for a few second, then it will go into recovery.
From there you can copy another rom and flash it.
I am currently using Elelinux 3.6, but you can find many others.
By the way, which rom did u flash?
Hi, thanks for the fast reply
I cannot get onto the homescreen to install any apps at all, so all I got to work with is the recovery menu. Fast Boot and SimLock.
I installed what I now know to be a new lockscreen, which was about 2.5mb. So obviously not right now, but I rushed into it without looking things over properly.
I might be able to fix it, if the simcard was detected. It stops me at that point during recovery.
I rooted the device using a terminal app, but as the data has now been wiped, the app doesnt exist. And I cant reinstall it again because I cannot get to the homescreen.
You don't need to install any app, I don't understand if you have recovery installed or not.
Just press home+off button for a few seconds when your phone is OFF.
What do u see?
That gives me the red ! sign, and I can get a menu up by pressing volUp+off
This menu has Fast Boot and SimLock.
Yes, that is the normal bootloader, that means you don't have recovery installed.
You could try to unroot your phone by install the HTC sync software on your PC first, then use it to reinstall the stock RUU 2.1, that you can find on the HTC website:
http://www.htc.com/nl/help/htc-hero/#download (change the language)
Once you have done that, you should be able to root it again if you want, but make sure you will install recovery this time.
Look for the guides in the Hero forum, or you can use this:
http://www.villainrom.co.uk/forum/threads/how-to-root-the-2-1-ruu-or-ota-update-for-the-hero.1930/
Hi. I found this a while ago, and tried it. But I cannot enable USB Debug, as I cannot do ANYTHING on the device...
I just ends up giving me a 170 error, always.
Are u talking about the HTC sync driver?
Yes. I think so.
RUU_Herrange_UK_2.73.61.66_release_signed_NoDriver.exe
It starts a utility up which tells me to make sure the device is connected via usb to my pc, check battery is 30% or higher and something else.
Then it tells me to wait, and returns a 170 error.
Then you should check the HTC Hero forum or Google for any suggestions, I am sure people had the same problem in the past.
I am afraid I can't help you more than this, I am no developer..
Okay, thanks anyways
I have already raked Google and help forums, coming here is my last resourt.
Keep searching, I am sure there is a way to fix it, I have read so many things about the Hero in this two years, unfortunately I forgot most of it...
Sent from my Hero using xda premium
I will do. I have no choice, the warrantly is now void xD
I was working fine, enjoying my new HTC One S with CM9 rom installed. Well the battery life wasnt the best on it, and i didnt install the custom kernel. So I looked for the custom kernel download(on my phone, not on my computer) and i found a .zip file. Well I thought that you could just download the kernel straight to my phone and open it up with "Rom Manager" which i did, it than said i needed to reboot the phone in recovery to continue the installation, so I did... it took me to recovery "to continue the installation" well than I looked away, looked backed down and it was black.... and i have tried powering up, booting into boot loader, booting into recover, and nothing... its just BLACK! nothing works, its literally useless ATM. I really messed up, is there anyway to fix this? Thanks in advanced!
----EDIT----
I think I accidentally flashed the kernel like i would normally flash a rom.... cause i downloaded the .zip file(directly to my phone, not using a computer), than i tapped the download and it asked me if i wanted to open it up with rom manager, so i did. and i think rom manager thought i was flashing a rom, when i wasnt, it was a kernel.... am i screwed? or is there anyway out of this?
Do you know the exact kernel you flashed--where did it come from
Some you need to extract and push
Assume you just tried to boot into bootloader thru phone buttons
Does your pc recognize your phone when plugged in, if so can you open a command window and try to access phone as in adb devices then adb reboot bootloader
assuming you are familiar with sdk adb/fastboot comands
otherwise i don't know what else to say--may be bad--sorry
Came from an XDA thread
Here is where it came from: http://forum.xda-developers.com/showthread.php?t=1708676 from "sun90" (half way down the page "CM9 KERNEL remix edition.zip - [Click for QR Code] (5.53 MB, 9 views) ")
i downloaded that straight to my phone and opened it up with Rom Manager, which i think the app took it as a rom, and installed it like a rom even though it was not a rom. I just tried to access it through adb, it comes up with no devices my PC does recognize it when i plug it in though...
Ive tried to get into bootloader tons of times, it just stays black... :'(
Thanks for your answer!
You flashed a galaxy s2 kernel on your one s? why would you ever think that was a smart thing to do?
Looking at the updater script in that zip it seems it wipes some partitions, the partitions on a SGS2 and the ONE S are different, so if that script accidentally wiped say the hboot partition, or some other critical-for-boot partition, you have a fully bricked phone.
For any devs that may know what partitions are what on the One S, the script wiped
mmcblk0p7, and wrote a zimage to mmcblk0p5
---EDIT---
Normally this is a cwm flashable zip on the Samsung Galaxy S II, which is why rom manager flashed it, as it met all the requirements, the only issue is, it was not made for the ONE S and probably overwrote some important things.
I tried for hours and hours to fix the same issue on a friend's One S (same symptoms, not same cause) to no avail. I tried QPST and telnet and a ridiculous amount of things. Had to bring it to the store and get a new one.
Good luck, but I don't believe there's anything you can do to fix it.
Just answered your question in the help thread, Didnt see this thread too !
Im afraid its not looking good, I think your best bet would be to call your provider and blame it on an OTA update.
And hope for the best
Alright, thanks for the help!
Well it looks like i bricked my phone than.... I thought that CM9 was only on the One S, so I just looked for the CM9 kernel, which obviously was for the sg2, i feel like such a dumb ass now! haha well thanks for all the help guys! ill be heading to the t-mobile store today to blame it on a OTA:]
yeah, others wont agree with what your about to do but........
just act like a complete noob, dont mention anything about software / firmware / ROMs / bootloader etc ect
just say your phone made a noise, you selected update and it died lol
good luck--I know it is heartbreaking
not sure of your situation with carrier, but you could go thru Retention if needed
Hi peeps.
i'm very new to all this but sort of know the basics
i'm running on Axiom now but tried to flash cm10 but after install i got a black screen so had to do a restore.
Today i just flashed venom and after the instal process is done, i hear the start up music but nothing on the screen.
I have had 3 other roms on my phone and never had a problem!
these are the steps i do
download rom - place on sd
put phone in recovery
reset factory
reset cache
install from sd
when it finish's reboot
blank screen.
Am i missing something?
Any help would be great and i can't post on the thread because i'm a noob with less than 10 and dont want to spam my way to the 10 :silly:
you are missing a lot, like reading the OP page and following install instructions
you missed separate flash of boot image and wiping system plus data and caches
i wipe system 3x to be safe
rugmankc said:
you are missing a lot, like reading the OP page and following install instructions
you missed separate flash of boot image and wiping system plus data and caches
i wipe system 3x to be safe
Click to expand...
Click to collapse
Thanks but i think that is now the least of my problems!
I used Goomanager and installed CM10, When I did it i installed teamwin recovery. It started to do a lot of strange things, when it finally rebooted i got a load of errors "phone is not working" nearly every 10 seconds?
it will not connect via usb, i discovered the the SD was not mounted.
I tried to mount the SD but it doesnt work, so i rebooted to recovery and tried to mount there but its coming up with - error unable to mount? ive tried everything but no joy
please please help
Thanks:crying:
see if this is your situation
http://forum.xda-developers.com/showthread.php?t=1630459
can you connect phone to pc and use fastboot commands
rugmankc said:
see if this is your situation
http://forum.xda-developers.com/showthread.php?t=1630459
can you connect phone to pc and use fastboot commands
Click to expand...
Click to collapse
I've got a mac
not sure what fastboot is.
I'll check out the link, and thank you very much for trying to help:good:
sorry i do know what fastboot is, yes can get in to it. but ive gone from CWM to teamwin recovery if i go in to the recovery section but that wont let me do anything because the mount. cant even load the phone up
I don't know Mac commands
My idea is to install htc drivers and set up fastboot/adb on pc--the info can be found in dev section on rooting
then open a command window and and boot into fastboot and flash a new recovery, maybe stock per the link, clear storage and try to get mounted
how did you unlock bootloader--
you will need to do alot of reading on adb/fastboot and flashing roms--first step is to have backups of rom and sdcard
since i don't the Mac commands to do fastboot, someone else will chime in at some point
you can alos go to the noob section in Q&A and resubmit your issue
someone will work you thru this, but in meantime study up on android sdk/fastboot/adb. a necessity to get out of these problems
you are not bricked, just need the info and right steps to get back on track
rugmankc said:
I don't know Mac commands
My idea is to install htc drivers and set up fastboot/adb on pc--the info can be found in dev section on rooting
then open a command window and and boot into fastboot and flash a new recovery, maybe stock per the link, clear storage and try to get mounted
how did you unlock bootloader--
you will need to do alot of reading on adb/fastboot and flashing roms--first step is to have backups of rom and sdcard
since i don't the Mac commands to do fastboot, someone else will chime in at some point
you can alos go to the noob section in Q&A and resubmit your issue
someone will work you thru this, but in meantime study up on android sdk/fastboot/adb. a necessity to get out of these problems
you are not bricked, just need the info and right steps to get back on track
Click to expand...
Click to collapse
im going to use someone elses alp top with windows. i'll ytry the all in one thing because thats how i rooted it in the first place. thanks for helping it means alot
good luck on it
Hi everybody,
after endless nights and days of experimenting and crying I ask for your help.
My Aim: rooting my HTC One S C2.
So here is my story:
In my first attempt I unlocked my bootloader and tried to put a Custom Recovery on my phone. It failed. I got always stuck at the HTC screen with the red writing underneath the logo ("This build is for ...").
I then found out that I need the superboot.bat to root my phone.
So I proceeded to re-lock my phone and put a RUU on it to get back to the original Recovery.
All went well, so I unlocked my phone again via htcdev.com.
After that I tried to run the superboot.bat but again I am stuck at the HTC screen with the red writing!
I know that this screen should only appear for a few seconds and the phone should go into recovery but I am always stuck endless in this screen. To get out of it I have to soft reset my phone.
So I am not able to root it.
In a video I saw that on other phones the HTC screen with red writing has some kind of a "loading bar" on the upper right which appears after trying to access the recovery.
Well this bar doesn't even appear on my phone
Please help me I really don't know what to do further
same issue here, so subscribing to thread!
If you can get to download mode try to flash stock firmware with Odin. Search for a guide on youtube.
--------------------------------------------
Sent from my GT-S5830 running ImaGinary ICS.
Thank if it helped.It's there for a reason
Ähm isn't Odin for Samsung devices?
This is about HTC... Or does it work for both?
i recommend reading through this guide to rooting the one s. i've rooted quite a few phones using this method and it has worked flawlessly every time
http://forum.xda-developers.com/showthread.php?t=1583427
@HidaKureku - thats where i've got stuck; end of part two.
the recovery image seems to flash fine (both of them), and i've done the CWM recovery multiple times (some sites sugest that it works on the second attempt).
try to boot to recovery, and as per the OP it just sits there saying that it's for "This build is for HTC use only..." or whatever it says. no further. I've left it for 10mins in this state have have to power it off.
i have found that when i boot back to the UK retail ROM, it comes up with an error and wants to send it to HTC (i haven't yet been able to grab the error though).
has anyone sucessfully flashed recovery with the hboot 9.02.0001 image? i've seen a post on modaco with a user having the same problems as in this thread....
are you sure you're model has the S4 processor? if not, try this thread
http://forum.xda-developers.com/showthread.php?t=1785777&highlight=twrp
looks like i'm on the s3 version! twrp2 doesn't work either - same issue. (using openrecovery-twrp-2.2.2.0-ville.img)
seems the UK is one of these 'select' countries.
anyway - even an S3 compatible recovery isnt working....
I hope in not threadjacking here. @OP - if im intruding let me know and i'll create my own thread
No you are not intruding as I have exactley the same problem as you!
I'm glad that I'm not the only one I started to think I'm doing something completely wrong.
It's like the stock recovery is damaged even with the RUU version.
I just cannot get past this screen with the red warning!
My HTC One S is kind of new (about 3 weeks old). Maybe something changed with new models?
good news; i'm recovery-ed
you need 'openrecovery-twrp-2.2.2.1-villec2.img'.
It was 'tricky' to find, as the 'villec2' image doesnt appear to have any public links. As per the thread http://forum.xda-developers.com/showthread.php?t=1785777, Get 'goomanager', allow it to find and download recovery image, however, it wont sucessfully apply with goomanager (you dont have root yet).
It will download this recovery image to to /mnt/sdcard/goomanager/ (you can change/confirm it in goomanager menu options)
mount storage & copy this to your computer. Use fastboot to flash as per the unlock/recovery/root guide.
i dont mind hosting the file, but the above should be the quickest way
Yes!!!
That's it!!
Thank you so much
You made my day
Thread can be marked as solved!
now that you know you have the s3 processor be careful which roms you flash, make sure they are compatible with your version. the rom i'm running (check my signature for the link) is supposed to be compatible with both. but just read carefully and flash responsibly
HidaKureku said:
now that you know you have the s3 processor be careful which roms you flash, make sure they are compatible with your version. the rom i'm running (check my signature for the link) is supposed to be compatible with both. but just read carefully and flash responsibly
Click to expand...
Click to collapse
Thanks for the heads up, although that JB ROM in your sig says S4 in the title (thats about as far as i got )
@Schlengge - glad your sorted too i didnt even realise i was on s3 untill tonight; i thought all UK HOS's were s4's - seems not.
yeah XD i went back and looked at it and realized i got it confused with one rom i saw that was supposedly compatible with both processors (which struck me as odd) but there are a few roms out there for the s3, sadly not as many as for the s4, but you should be able to find one you're happy with. best of luck
veehexx said:
good news; i'm recovery-ed
you need 'openrecovery-twrp-2.2.2.1-villec2.img'.
It was 'tricky' to find, as the 'villec2' image doesnt appear to have any public links. As per the thread http://forum.xda-developers.com/showthread.php?t=1785777, Get 'goomanager', allow it to find and download recovery image, however, it wont sucessfully apply with goomanager (you dont have root yet).
It will download this recovery image to to /mnt/sdcard/goomanager/ (you can change/confirm it in goomanager menu options)
mount storage & copy this to your computer. Use fastboot to flash as per the unlock/recovery/root guide.
i dont mind hosting the file, but the above should be the quickest way
Click to expand...
Click to collapse
well, thanks for that advice. It is kinda confusing to find a recovery for c2 version of the ONE S, cause any other recovery will not work with it. The twrp-team should definatly add the link to that on their website.
Hi guys
As you may have noticed; I have a HTC One X+ (4.2.2)
I ain't super experienced when it comes to rooting, but neither a complete stranger.
There is a guide on Youtube from "zedomax" that I followed. The first problem was; I couldn't acces my HTC on my mac. After a few tries it did. I got the token to unlock the bootloader, and unlocked the device succesfully. I had to copy a file to my HTC (I searched the web for the latest "supersu" and the "clockworkmod". The clockworkmod said "OKAY". I went in to fastbootmode, and when I try to start the cwm recovery (by choosing recovery in fastbootmode) my HTC One X+ just decides to turn off (in a state charging is impossible) when I turn the phone back on, it starts the normal way. I have been searching for ages to find a solution, and would be surprised if someone actually knew what's wrong.
Guide I followed: can't use link
- I tried windows and mac
So please, help me out here (and others with the same problem)
HTCOneX+ said:
Hi guys
As you may have noticed; I have a HTC One X+ (4.2.2)
I ain't super experienced when it comes to rooting, but neither a complete stranger.
There is a guide on Youtube from "zedomax" that I followed. The first problem was; I couldn't acces my HTC on my mac. After a few tries it did. I got the token to unlock the bootloader, and unlocked the device succesfully. I had to copy a file to my HTC (I searched the web for the latest "supersu" and the "clockworkmod". The clockworkmod said "OKAY". I went in to fastbootmode, and when I try to start the cwm recovery (by choosing recovery in fastbootmode) my HTC One X+ just decides to turn off (in a state charging is impossible) when I turn the phone back on, it starts the normal way. I have been searching for ages to find a solution, and would be surprised if someone actually knew what's wrong.
Guide I followed: can't use link
- I tried windows and mac
So please, help me out here (and others with the same problem)
Click to expand...
Click to collapse
Have you tried TWRP? Remember, not all recoveries work on all phones.
jay_r95 said:
Have you tried TWRP? Remember, not all recoveries work on all phones.
Click to expand...
Click to collapse
I haven't
I did find a useful guide on xda. I wonder if it is still up to date and if I can continue from a step halfway, since the phone is already unlocked?
Anyway. I will find out.
but thanks for the advise anyway
Ok so I am unsure if someone is filtering out OLD topics but i keep coming across FORUM posts from people and it seems like they are getting no help or being referred to NON existent topics.
I just recently bought a HTC ONE M8 H/K from sprint. I have had android for a decade and am seriously tired of the ROOT it people. so I figured why not no down falls and everyone says it is easy. Well I am Murphy last name law and you people have not seen or know the things I am about to post
I recently spent over 32 hours watching video and preparing for ROOTING. I unlocked phone got Pilz touch recovery and everything worked fine. I even got CWM and SUPERSU and Busy box. all of which needed OTHER files to work properly. Again a few forced quits everything was fine.
I wanted to Switch to TWRP and the install didnt go through. however now I have BOOTloop. trust me this is the tip of the berg at this point.
Just short of finding NO help after another 24hrs binge session on the CPU and just shy of RUNNING MY PHONE OVER WITH A DAMN CAR>
I get oh so simple easy fix and the only posts I see are FIXED IT!!! so that helps me approximately as much as my phone helps me make phone calls currently.
After the boot loop SEVERAL friends versed in this so called ROOTING (which I still find to be a hoax and not actually possible by any means at this point and time.) and no one has any clue. Tried flashing ROMS RUU's everything comes back to NO will not work.
Then it brings me to the STOCK RUU config for the HK M8 which seemed like it was going to work through ADB flash but guess what. 2 hrs idle NOTHING. after that The recovery program dropped out and boot loader only stated RUU in the menu. (something never before logged in a forum or post as I can tell) after many attempts to do GOD KNOWS WHAT WITHOUT ANSWERS as i was about to smash my beautiful gold phone into a dozen tiny peices and claim accident the Recovery came back to...... You guessed it NOTHING. All directories are UNMOUNTED and cannot be mounted.
I am stuck. Seriously you all fix my phone or help i am willing to send gifts because I am out 700$ now on this nice paperweight but everything and everyone tells me. OH SO SIMPLE you have recovery it aint no thang.
Well guess what it is and I am tired of being so PISSED OFF for something that was so automated.
Again I am Murphy and what you attempt to get me to follow will come up with some REALLY weird repercussions I will post back.
Please oh mighty gods of ruining my life. Spare me this one thing I will never ask for another again.
How do I get my phone to just WORK, Simple. Right?
Hi there! I think I found a thread that can get you back on track. Please read every word carefully and follow every step. If you have further trouble or want to clarify anything, please ask in the thread. They know the device best and can help you I'm sure.
http://forum.xda-developers.com/showthread.php?t=2503646
I'm afraid that is the extent of what we do in the XDA Assist Section. We are guides...pointing people in the right direction when they can't find what they are looking for. Unfortunately we don't do hands on support in this section, so as I said....if you need a further hand, I am sure someone in the thread I linked can help.
And make sure anything you download and flash is for your model. And as always, do a Nandroid backup in recovery... before flashing anything new....it can be a lifesaver to help restore you when you hit trouble.
Good luck!
Details
Let me re iterate.
All guides are demanding S-Off (cannot as I cannot acess phone apps to do so)
All guides need HOME access for apps to modify certain things
I cannot:
Push packet through adb as they are unreadable
Get past boot screen
Recovery is only 40% operational with visibilty of phone only working sometime.
Cannot flash
Cannot push
Cannot fastboot
Cannot see device on CPU as it is stuck in recovery
ALL DIRECTORIES in /SDCARD have been removed
No Firmware
No RUU
No img
As far as I can tell.....Phone is empty and cannot be populated with anythin. I did manage to get SuperSu pushed through and installed. But how do I open it?
No ROOT access as well in the recovery.
I followed ALL STEPS of EASY guides even downloaded one button app that runs it all for me. Can't talk to phone does not see it in ADB.
The other guide I went to was helpful but I have already attempted all of those things.
With an empty phone NO DATA and no ability to get ADB to even run data over cable I am baffled.
I did exactly like the 500 guides i read said.
1) bootlock unlock
2)instal recovery (Philzmod)
3) get CWM (retrieved from playstore) Need a .zip to run in ADB
Phone worked fine until I changed from Philz mod to TWRP which never took place. Philz mod still runs but TWRP said it installed.
Now I have a completely worthless empty phone and I have cried about a tub worth of tears over the 700 i will be dropping over the next year for a piece of metal.
Oh and 99.9% of time if ADB DOES do something either no directory once pushed, cannot read or cannot FIND/Open directory stating BAD installation aborted I NEED a better recovery
I understand your frustration. Not a fun situation at all.
As I said, XDA Assist is here to help navigate the website. Not to troubleshoot I'm afraid.
The purpose of XDA Assist... http://forum.xda-developers.com/showthread.php?t=2764768
The very best place to ask for help in your situation is right here, in the Q&A section for your device... http://forum.xda-developers.com/showthread.php?t=2764768
The people there know your device best. Start a thread that's to the point, polite and accurate....what is exactly wrong, and the exact steps you took to get there. And hopefully help will follow.
Hope it can be solved for you!