Related
Hi sorry, I couldn't find where to put this but I just rooted my ASUS transformer on 3.2 - 8.6.5.19 sucessfully and now need to or want to know what to do?
1-Ive heard of overclocking but I would want to do it safely
2-Id like to make a backup before I do anything that may mess things up
3-Ive got Rom manager on it but it asks to make sure that I have clockmodwork Recovery and I can't find where to get it.
and finally
4-What can I really do with this thing now?
Please let me know thanks
Well, browsing and searching through the forums should give you enough answers... If you had any other Android device, it is all the same here.
Anyway, if you've installed ClockWorkMod Recovery (the Rom manager can usually do this, but I am not sure as I haven't tried it for this device), you can try it by switching the device off and powering up with keeping power and volume down buttons pressed. After a while you'll get a message like "press vol-up to boot recovery in 5 seconds". If you press vol-up, you'll get into the recovery.
If you did not install CWM, you can also use this tool: http://forum.xda-developers.com/showthread.php?t=1346180
That's what I used.
As for backup - you can do nandroid backup of your current rom from the CWM recovery (in case something goes wrong, you can easily revert to the current rom). You'll have to use one of the backup apps if you want to backup data and apps from your current rom though.
If you want to install a new rom, put it into the root of your sd card (real one, not internal storage), then do a full wipe (clear data/factory reset in CWM), then select "install zip from sd card" (don't remember the exact message), confirm, wait for it to finish, select reboot and you're done.
As for overclocking, I don't know yet, I've had this device just for a few days. Check out the available ROMs, they probably have some overclocking tools/features.
I just love this device - rooting and installing CWM without even having to connect to a PC
1- search the forum
2- search the forum
3- search the forum
4-throw it into the sea
1. Search & Read
If you ask such questions, you clearly do not have an idea what are you doing. Gain some knowledge before you harm your device
However Sigismund83's post should cover it up
ROM Manager does not work with the TF101.
Everyone always says "search" but it not always as easy as it seems when your a noob .. Although there are guides for alot of things, it isnt as noob friendly as it could be.
Some guides are out of date and throw you off in the wrong direction, and it can end up taking you a fair bit of time searching and reading old topics till you finally come across / figure out the correct process...
Heres what i would suggest (as i just did this myself)
1. Root with Razorclaw (youve already done)
2. Install the easy recovery installer Tool for flashing CWM in one click
3. Download a Rom of your choice ... Prime, Revolver, Revolution etc etc and transfer it to your microSD card
4. Boot into recovery (cwm) and flash the rom (flash update from SDcard) (this is another good quick tool Reboot to recovery App
Bobs your auntie ...
Thank you!
Danny-B- said:
Everyone always says "search" but it not always as easy as it seems when your a noob .. Although there are guides for alot of things, it isnt as noob friendly as it could be.
Some guides are out of date and throw you off in the wrong direction, and it can end up taking you a fair bit of time searching and reading old topics till you finally come across / figure out the correct process...
Click to expand...
Click to collapse
Boy ain't THAT the truth! Searching these forums is agonizing for exactly those reasons. It would be nice if there were more people that would just answer if they know or if they don't want to help just move on. "Read and search the forums" is less than helpful.
gbweller said:
Boy ain't THAT the truth! Searching these forums is agonizing for exactly those reasons. It would be nice if there were more people that would just answer if they know or if they don't want to help just move on. "Read and search the forums" is less than helpful.
Click to expand...
Click to collapse
I think the point everyone is saying is, he rooted his tablet and then asks, "What do I do with it," which indicates he didn't really have a reason to root it in the first place other than for the fact that he could.
He should have researched rooting, what benefits it brings, pros & cons, etc, before just rooting for the hell of it.
I'm wondering why would someone root a device and not know what to do with it. It's like getting a tattoo and then ask now what?
Danny-B- said:
Everyone always says "search" but it not always as easy as it seems when your a noob .. Although there are guides for alot of things, it isnt as noob friendly as it could be.
Click to expand...
Click to collapse
There is nothing more noob-friendly than searching IMO. Where things get hairy for noobs is when they decide to take the easy route and ask questions that have already been asked, probably 5-10 times at least before someone really starts trolling those questions..
Searching is only difficult if you have a sub-grammar-school reading level..you have to be willing to use your eyes and actually read some, even things you may not need to know, to find what you are actually looking for...you may find that learning stuff that you didn't need actually turns out to save your ass later (as has happened to me many many times).
That is why we say over and over to search, because learning to find your own answers, a crucial skill in problem solving, is much better than simply answering a single question that has been asked over and over, you aren't teaching you are doing their work for them..you know, teach a man to fish and all that jazz. Honestly, the only time searching for your answers is difficult for noobs is when their device is brand new and not undergone a lot of development. But in the case of our TF101, there are entire websites devoted to it. It has been out for nearly a year now.
No offense to any noobs who didn't want to hear it!
I rooted mine to fix the speaker balance. No reason to root other than that, and I'll probably un-do it so I can use Movie rentals from the Market.
I don't know where to post this, I'm coming here all panicked and retarded, so I'm apologizing in advance.
I literally bought my Galaxy S 4G from WIND (Canada) this morning. From what I understood, upgrading the OS was dangerous, all I wanted to do was root... I followed this guide: ht tp ://w ww.gal axyforum s.ne t/forum/off-topic-forum/5053-rooting-tutorial-here-posted-permission-t-mobile-galaxy-s-4g-gingerbread.html (remove spaces)
which I found in a post on these forums. Someone who also was on WIND said it worked fine for them... They were rooted. I foolishly tried it, everything seemed FINE. When I load CWM it can't mount my SD card. I don't know what to do, it's stuck in T-Mobile boot screen loop if I try to exit.. I literally just stopped crying. My dad is going to KILL me if he finds out I ****ed up the new phone I just bought HOURS ago. I don't know what the **** to do, I don't know what's wrong. I need help, please. Anybody know what I can do? I don't care about rooting, I just need my device to work. Please, someone, anyone with any idea, what should I do? I can get back into download mode, and CWM. Is there anything I can do there? There's a recovery guide pinned but it says it's for the T-Mobile version, which I read is the same, can I use that to fix my phone?
This is my first Android device, I've never owned one before. I don't know ****, I shouldn't have tried anything... I just got cocky and made a mistake. I'm usually very good with this kind of stuff. Please someone tell me if there's something I can do to fix this, please!
I'm sorry if I sound stupid, I'm trying not to, I'm just really panicky and stressed right now.
I've tried searching through the forums - I still am searching through them, I'm sorry if I missed a post that can help me.
EDIT: I found someone who is also stuck in a boot loop... He seems to have SD Card issues as well, but doesn't speak English very well, so I don't thing he was able to communicate what his issue was...
Quote:
Originally Posted by GMK63
.......(---------THAT WHAT I FOLLOWED .
But I did the first part and They said i should get the stuff I store on my SD Card to pull out a file (``12) In CWM, use your volume up/down positions to navigate, scroll down to "Install Zip From SDcard". Select with a click of the power button. Navigate to where you put sms-T959V-KJ6-v0.1.1-rc1-unsigned-update.zip (in the root of your SDcard) and select with the power button. Confirm you want to install.
``)
but it doesn't give me the option to go get it on my SDcard and Now my Phone just turns on and off with the samsung galaxy S logo plus T-mobile exclusive logo . The only possitive thing about all the damage is that I can still put my phone on dowload mode and I just think if someone knows how to get my phone back to it state they will need me to put it on download mode.
Thank you in advance for your Help, for replying and offering to help.
I appriciate it. My phone is Mobillicity carrier just like wind .[/B]
Then, user bhundven replies to him saying:
Ok, this is really simple. I've explained it in quite a few threads in the Galaxy S 4G forums in General, Q&A, and the Dev forum. I'm going to explain this, but in a way to be more general. So I'm being verbose in case anyone else with a T959W happens to run across this and has not tried anything yet.
Again, I'm not good with windows at all, and I prefer it that way.
If you're on windows, check out our wiki:
http://forum.xda-developers.com/wiki...xy_S/SGH-T959V
There is tons of help there for setting up heimdall on windows with all the right drivers and such.
Once you have heimdall setup get AntonX's latest cwm zip for his kernel.
This kernel is a BML kernel, and this guide I am giving you right now will help you get cm9 installed which is an MTD kernel. You can find out more about BML vs. MTD here.
Once you have downloaded AntonX's kernel, extract the zImage from it and open up the terminal/cmd prompt and navigate to the directory you extracted the zImage to.
Put your phone into Download Mode and type the following in the command prompt:
Code:
heimdall flash --kernel zImage
The heimdall program will flash this kernel+initramfs to the kernel partition and reboot the phone. Do not unplug the usb cable until you see the "Galaxy S" screen. When you see that screen, unplug the usb cable and remove the battery from the back.
Assuming you downloaded CM9 and put it on your sdcard already, you can get into recovery by holding the vol+ and vol-, then pressing the power button to turn the phone on. When you see the "Galaxy S" screen, let go of the buttons, and you should be in the recovery now.
This is where things get a little tricky. If you have not tried to do anything to your phone yet. This would be a great time to use the "Backup and Recovery" menu on CWM. Do a full backup.
The "assert 7" error that the previous person got was because the cwm install script (the updater-script) checks the already installed /system/build.prop's data against the "to be installed" build.prop to verify this rom can be installed. If it doesn't exist, then it moves forward.
So the first order of business is to wipe the /system partition. Go to "Mounts and Storage" and format the system partition.
Now go back to the main screen and do "Factory Reset/Wipe Data".
Now go "Install zip from sdcard" -> "choose zip from sdcard" -> and use the volume keys to select the zip file.
After the rom is installed, navigate back to the main screen and "Reboot the system now" if it doesn't reboot by itself.
When the phone reboots, because it is going from BML to MTD, it obviously can't just install the files to what would be an MTD partition if the kernel knows nothing about MTD. So it boots into the newly installed MTD kernel and continues the installation, which in the end will also reboot again.
The first boot is very slow. It is building a cache of all the pre-installed system applications. Let it sit for a while. I know it's tempting to go play with your phone right away, but resist if you can.
The next CM9 release will be on a different kernel, and albeit a much better rom.
I will also be adding OTA Asserts for SGH-T959W so that you will not have to wipe /system before installing the rom, but I do that still just for good measure. But this also means that your phone will work properly with the google play store.
If this still does not work, please let me know what went wrong and I will be happy to assist!
-Bryan
Is what Bryan is saying my solution? I don't think he understood the SD Card mount issue. Does anyone know how to fix that? I really hope to hear from you guys ASAP before my dad catches on... Please. I really need help. I'll search more in the morning, it's 1 AM here.
Okay well first of all.. GET A GRIP OF YOUR SELF
*slaps twice across the face
This phone is unbrickable so can you get in to download mode? (power off phone then when it's off hold the volume up and down buttons at the same time, while holding them down connect your phone to a usb cable)
A green android digging thing should show on your screen. Tell me when you get this far.
Sent from my HTC VLE_U using xda app-developers app
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
bkoon1218 said:
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
Click to expand...
Click to collapse
That's true, just make sure you have the drivers installed for the phone first and for the purpose of my method of recovery download Odin. If you did everything correctly you'll see a green light in Odin under recognized devices once you're in download mode
Sent from my HTC VLE_U using xda app-developers app
lonoguge said:
Okay well first of all.. GET A GRIP OF YOUR SELF
*slaps twice across the face
This phone is unbrickable so can you get in to download mode? (power off phone then when it's off hold the volume up and down buttons at the same time, while holding them down connect your phone to a usb cable)
A green android digging thing should show on your screen. Tell me when you get this far.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Thanks for the slaps, I needed them!
Yes! I think I am still able to get into download mode, atleast I was able to last night (After the loop issue). Also, I formatted (factory reset option or something?) my settings when I was in CWM last night assuming that would change it back to the way it was, or atleast fix the SD mount problem..I hope this doesn't cause any issues.
What should I do when I'm in download mode?
bkoon1218 said:
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
Click to expand...
Click to collapse
That's great news! It's nice to hear that someone who's phone was also messed was able to repair it.
lonoguge said:
That's true, *just make sure you have the drivers installed for the phone first and for the purpose of my method of recovery download Odin. *If you did everything correctly you'll see a green light in Odin under recognized devices once you're in download mode
Click to expand...
Click to collapse
Where can I get these drivers? Should I download the latest version of Odin?
I'll try this as soon as I get back from taking my little sister to school.
I just want to say again, this is the SGH-T959W from WIND in Canada. It's apparently the same hardware as the SGS4G from T-Mobile, just different software. I hope this isn't a problem.
Thank you both for replying so soon. After tossing and turning in bed for the last 5 hours, barely getting any sleep, it's such a relief to read these posts!
Obviously you didn't read too much if you bought the phone and tried to mess with it the same day. You would have seen if you went to the 2nd page of here and actually read something like this, http://forum.xda-developers.com/showthread.php?t=1552119 where I clearly say, it is it different, you will get boot looped, I am working on a package to fix it, and for anyone on a wind phone to hold on and wait.
I don't have time to try and help and fix every single wind phone in the world because people get too impatient and start flashing everything in the world from the first post they read. Odin and Heimdall fail at certain parts of flashing this phone. I am trying to give the Heimdall creator as much as I can to help fix this, so everyone telling to flash this or that package, it's not going to work, it will fail. I have verified this 100 times with Heimdall.
I can't put together a 1click package that fails flashing, that's why people are ending up in this position in the first place.
I can get your phone fixed but not right this second. There is no permanant damage done, and the less you just keep flashing random stuff, the more likely the chance I can help you fix it, but I'm busy, I run my own business and my paying customers come first as does my mortgage and bills before spending an hour teamviewed into someones pc to fix this.
So hang tight, I will try later to get this fixed, it's not screwed, quit flashing anything you find.
Past what getochkn just said (and please do ignore the "advice" given by people who don't experience with a T-959W), next time you see a "helpful" post on some site that starts off "get this from [the original source]" -- please, please take the time to read the original source.
Secondly, just because your phone has the a similar "trade name" as another phone doesn't mean they are even close to the same inside. Even the model numbers don't mean much. Firmware from a T-959 generally won't work on a T-959V, and, as you have found out, T-969V firmware can make a T-959W a nice paperweight for a while.
Thirdly, I just don't "get" why people even consider flashing their phone on the first day they own it, before they have any idea what it came with and what it can do, not to mention voiding their warranty before even the buyer's remorse period has expired.
While you're waiting for someone to bail you out, you might want to take the time to download Java, the Microsoft C++ executables, and a full version of Heimdall.
getochkn said:
Obviously you didn't read too much if you bought the phone and tried to mess with it the same day. You would have seen if you went to the 2nd page of here and actually read something like this, http://forum.xda-developers.com/showthread.php?t=1552119 where I clearly say, it is it different, you will get boot looped, I am working on a package to fix it, and for anyone on a wind phone to hold on and wait.
I don't have time to try and help and fix every single wind phone in the world because people get too impatient and start flashing everything in the world from the first post they read. Odin and Heimdall fail at certain parts of flashing this phone. I am trying to give the Heimdall creator as much as I can to help fix this, so everyone telling to flash this or that package, it's not going to work, it will fail. I have verified this 100 times with Heimdall.
I can't put together a 1click package that fails flashing, that's why people are ending up in this position in the first place.
I can get your phone fixed but not right this second. There is no permanant damage done, and the less you just keep flashing random stuff, the more likely the chance I can help you fix it, but I'm busy, I run my own business and my paying customers come first as does my mortgage and bills before spending an hour teamviewed into someones pc to fix this.
So hang tight, I will try later to get this fixed, it's not screwed, quit flashing anything you find.
Click to expand...
Click to collapse
THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU!
I really didn't read enough, big mistake, I was just really cocky because I've modded almost every device I own (Wii, PSP, PS3, PS2 various and iDevices [mine, and friends]). Of course, they're all different (Not saying it's all the same thing! ), I just felt very confident because I've never had issues with anything before. At least this is a good learning experience, I've really been put in my pace. I always felt that bricking was something that happened to other people, it doesn't happen to me. I know that sounds stupid, but idk, that's just how I felt. I physically feel sick over this 'whole ordeal (Seriously), I'm such an idiot. >.<'
Thanks for the warning, I won't flash anything! I'm so relieved to hear that there's no permanent damage done, and to be able to speak to someone who's familiar with this specific problem and this specific model of the SGS4G, AND is willing to help me!
Do you know when you'll be able to help me? Of course, take your time, I completely understand that you have other stuff going on, I'm just wondering to see if I can maybe think of some cover up so my dad doesn't find out.
Also, I have a 14 day warranty, is it void now even though the root didn't work? I'm assuming it is.
Edit: Yup, if what jeffsf says is true, it's void.
jeffsf said:
Past what getochkn just said (and please do ignore the "advice" given by people who don't experience with a T-959W), next time you see a "helpful" post on some site that starts off "get this from [the original source]" -- please, please take the time to read the original source.
Secondly, just because your phone has the a similar "trade name" as another phone doesn't mean they are even close to the same inside. Even the model numbers don't mean much. Firmware from a T-959 generally won't work on a T-959V, and, as you have found out, T-969V firmware can make a T-959W a nice paperweight for a while.
Thirdly, I just don't "get" why people even consider flashing their phone on the first day they own it, before they have any idea what it came with and what it can do, not to mention voiding their warranty before even the buyer's remorse period has expired.
While you're waiting for someone to bail you out, you might want to take the time to download Java, the Microsoft C++ executables, and a full version of Heimdall.
Click to expand...
Click to collapse
I'm just very impatient sometimes. I really do enjoy doing this kind of stuff, it's fun for me. I just got really excited and wasn't thinking straight and just went out and tried rooting it. I've wanted an Android for a while now, and have always planned to root it to unlock it's full potential. I've never modded anything else day 1 (and never will again), this is the first time I've done this. I feel terrible about it.
Will do, thanks for helping, jeffsf.
If your still under 14 days return it with a stupid I don't know what happened look. If its stuck just on the tmob screen they most likely will never know what you did. Your other choice is to be a man and own up to it. Tell your dad and take your lumps. That choice is yours. Give it serious thought before you choose as it might define what type of person you end up becoming.
hechoen said:
If your still under 14 days return it with a stupid I don't know what happened look. If its stuck just on the tmob screen they most likely will never know what you did. Your other choice is to be a man and own up to it. Tell your dad and take your lumps. That choice is yours. Give it serious thought before you choose as it might define what type of person you end up becoming.
Click to expand...
Click to collapse
I feel like they might know. I'm willing to try it as a last resort, I'd like to give getochkn a shot first.
I'll tell my dad what happened after it's fixed. I just can't deal with him stressing me out about it more than I already am.
I will have a package probably tomorrow that will provide as detailed instructions as I can.
getochkn said:
I will have a package probably tomorrow that will provide as detailed instructions as I can.
Click to expand...
Click to collapse
Oh, wow! That's much sooner than I was expecting! Thanks for taking the time to do this for me, it really means a lot. Thank you so much getochkn!
Package and instructions here.
http://forum.xda-developers.com/showthread.php?t=1956025
getochkn said:
Package and instructions here.
http://forum.xda-developers.com/showthread.php?t=1956025
Click to expand...
Click to collapse
Thank you so much getochkn!
I read all the instructions before attempting this. But, I have a problem. Heimdall failed to flash. It said something about failing to retrieve the PIT or something? So, I tried again. Didn't work. So, I restarted my computer, and my phone.
Phone doesn't go into download mode, instead, I end up on a screen saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
What should I do?
BagelBreath said:
Thank you so much getochkn!
I read all the instructions before attempting this. But, I have a problem. Heimdall failed to flash. It said something about failing to retrieve the PIT or something? So, I tried again. Didn't work. So, I restarted my computer, and my phone.
Phone doesn't go into download mode, instead, I end up on a screen saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
What should I do?
Click to expand...
Click to collapse
That firmware screen should detect as download mode still in Heimdall. I have gotten that and reflashed from Heimdall before. Not sure why it's trying to download the pit, it should only do that when you tell it to download pit. Flashing shouldn't trigger that. See if Heimdall will detect it in that firmware recovery mode and I guess try again, otherwise your phone is really borked.
getochkn said:
That firmware screen should detect as download mode still in Heimdall. I have gotten that and reflashed from Heimdall before. Not sure why it's trying to download the pit, it should only do that when you tell it to download pit. Flashing shouldn't trigger that. See if Heimdall will detect it in that firmware recovery mode and I guess try again, otherwise your phone is really borked.
Click to expand...
Click to collapse
Thank you for the quick reply!
It worked! I really can't thank you enough! Thanks again for taking the time to do this!
I think it may have said "Uploading Pit" because it said it again this time, but it didn't encounter a problem when it did that.
I know I have 3 choices, the one I would like to choose is ICS. Would mind pointing me in the direction of an ICS ROM that's compatible with my device? I'm afraid to use something that may not work and mess up my phone again.
EDIT: Actually, I think I'll just stick with this. I just installed the twist kernal and the modem, everything works, I'm rooted and have recovery. I'd rather not mess with it until I'm more experienced with droids.
Thanks again everyone, especially you getochkn! I'm so relieved that my phone is working again! My dad didn't notice that I wasn't using the new phone I got, so I didn't have to cover up or anything.
Yep so I tried to install CM11
and the last thing was to:
fastboot flash boot boot.img
and that was it. Cannot restore my Nandroid backup - it doesn't boot back up.
Just gets stuck at the HTC page with "This build is for development purposes".
I think I need the stock boot.img but it is no where to be found.
Any help??
Just paid someone to get the RUU and restore then phone. I have no idea how he found the RUU since no one else here has it. If they have it they are not sharing it.
Who did you find to restore your phone?
808phone said:
Just paid someone to get the RUU and restore then phone. I have no idea how he found the RUU since no one else here has it. If they have it they are not sharing it.
Click to expand...
Click to collapse
I have the same problem. Who did you find to restore your phone? Is it possible that I could contact them?
so basically you paid a guy to google the right RUU???
all you had to do is check your CID (its written on fastboot) and search for that, they really arent that hard to find!!
http://forum.xda-developers.com/showthread.php?t=2140967
also if you're going to keep flashing different roms its also a good idea to keep that RUU on your pc somewhere!!
There was no matching ruu. What no one told me was that you could use a newer ruu than the one you have. Another thing, before you judge, there were no replies to help me so I had no choice. Since then look how many times I have helped others.
chrons6 said:
I have the same problem. Who did you find to restore your phone? Is it possible that I could contact them?
Click to expand...
Click to collapse
As I previously posted, you can use a newer ruu than the version you have installed. That's what the guy did.
In not judging at all man, i just couldnt understand as to why you couldnt fine the info... They guy you paid is no different to you or me, che just searched harder... As for the ruu the name itself tells you its an update... No biggie im glad you got it worked out in the end
Sent from my One S using xda app-developers app
zubeedubs said:
In not judging at all man, i just couldnt understand as to why you couldnt fine the info... They guy you paid is no different to you or me, che just searched harder... As for the ruu the name itself tells you its an update... No biggie im glad you got it worked out in the end
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
Did you not read what I said? THERE WAS NO MATCHING RUU! Read OK????
No one told me you could use a NEWER RUU.
If someone - perhaps you had told me, yeah fine, I could have done it. No one helped ok?
BTW: I did a nandroid backup, I had installed custom recovery, rooted with superSU etc... I had adb, fastboot working too. Because I couldn't get an answer I paid someone.
If you have a JTAG machine and you were running a business then maybe you are just like him.
808phone said:
Did you not read what I said? THERE WAS NO MATCHING RUU! Read OK????
No one told me you could use a NEWER RUU.
If someone - perhaps you had told me, yeah fine, I could have done it. No one helped ok?
BTW: I did a nandroid backup, I had installed custom recovery, rooted with superSU etc... I had adb, fastboot working too. Because I couldn't get an answer I paid someone.
If you have a JTAG machine and you were running a business then maybe you are just like him.
Click to expand...
Click to collapse
dude theres no need to get fassy about anything... unless your one s is knock off means that there is a RUU for your device and that you simply couldnt find one in the small amount of time that you searched for one...
and just to gnaw a little more at your flawed logic and sour attitude RUU means "ROM UPDATE UTILITY" so i guess your right in not being able to use a newer one... :good:
AND BTW.. i dont have a jtag but i do run a business and in my line of work we see folk like you everyday, ever so quick to get pi**ed at someone for THEIR OWN mistakes!!!
and maybe if youre that impatient and wound up for your own calamities it serves you right to have paid for a simple task..
---------- Post added at 08:21 PM ---------- Previous post was at 08:14 PM ----------
chrons6 said:
I have the same problem. Who did you find to restore your phone? Is it possible that I could contact them?
Click to expand...
Click to collapse
have a peek at the RUU thread in the dev section and follow the instructions... it really isnt that difficult!!!
? and in my line of work we see folk like you everyday
Right and that's why I have more thanks and posts than you for helping people.
Yes, I know that a RUU has a version number too. I know what it means. If you even took the time to realize that after having to pay, I helped out other people after that so they wouldn't have to pay.
I guess you don't read. I said you COULD use a newer version of the RUU but no one told me.
Where were you when I asked for help? Never mind, you go about yourself and I will continue helping.
In my line of work I know people like you too. You are the type of person people avoid so create your own thread and stop jumping in with unhelpful info.
808phone said:
? and in my line of work we see folk like you everyday
Right and that's why I have more thanks and posts than you for helping people.
Yes, I know that a RUU has a version number too. I know what it means. If you even took the time to realize that after having to pay, I helped out other people after that so they wouldn't have to pay.
I guess you don't read. I said you COULD use a newer version of the RUU but no one told me.
Where were you when I asked for help? Never mind, you go about yourself and I will continue helping.
In my line of work I know people like you too. You are the type of person people avoid so create your own thread and stop jumping in with unhelpful info.
Click to expand...
Click to collapse
about your deluded logic: paying a guy to fix your mistakes is the right info??? seriously?? and thats supposed to help the next guy more than directing him towards the right RUU??? boy you really are a contribution to the comunity...
about your thanks rating: i signed up last month and youve been here since january if youve ever contributed anything on here then you should have more thanks than me, its basic math, also i think i should point out that its a forum and not "thank marathon" nobody wins a prize for them...
as far as helping people: i suppose you have, i dont really care that much either..
lastly: i came on your thread infact to lend a hand, until i saw that youre actually lazy and ready to fire off your mouth at strangers for nothing apart from stating the obvious truth...
so as of now you can take your all your thanks and try and cash them in for the next phone you softbrick and "need" to pay someone else to fix...or maybe not!!!
as for me this discussion is closed as i can only feed a troll so much!!!
808phone said:
As I previously posted, you can use a newer ruu than the version you have installed. That's what the guy did.
Click to expand...
Click to collapse
I understand how the RUU works and how to use it. My problem, though I hope not, may be slightly more unique?
I had previously rooted by ONE S T-Mobile version and it had been working fine. I then decided to try out another rom. I likely flashed an incorrect boot img because it would only reboot into fastboot, but would still allow me to go into recovery. I went to recovery and restored my nandroid backup; however, now the phone will get stuck on the opening HTC screen the red language on the bottom, "this build is for development purposes only." It will hang on this screen for about 20 seconds and then turn off. No loop. When I attempt to power up again, I get a quick horizontal flash of light across my screen and then the orange LED comes on in the top left corner indicating the phone is charging. I then hold down power and again the phone gets stuck on the opening HTC screen with the red language.
My problem is that I cannot get the phone into fastboot
I've received advice on how to enter the bootloader: power off the phone manually by pressing power for 10+ seconds. Then I' should be able to enter the bootloader and fastboot. (Vol down + power)
Unfortunately, no matter how many times I try, using the above method and a variety of other methods, I still can't get past "HTC developmental purposes only" screen. I'm not new to android and have experience with a number of phones, but this is my first HTC. Pretty frustrating thus far. Rather than spend many more hours pulling out my hair and continually going in circles with no progress to show for my efforts, I'd rather pay someone to make the necessary fixes for me.
Any additional advice would be much appreciated.
same problem
zubeedubs said:
about your deluded logic: paying a guy to fix your mistakes is the right info??? seriously?? and thats supposed to help the next guy more than directing him towards the right RUU??? boy you really are a contribution to the comunity...
about your thanks rating: i signed up last month and youve been here since january if youve ever contributed anything on here then you should have more thanks than me, its basic math, also i think i should point out that its a forum and not "thank marathon" nobody wins a prize for them...
as far as helping people: i suppose you have, i dont really care that much either..
lastly: i came on your thread infact to lend a hand, until i saw that youre actually lazy and ready to fire off your mouth at strangers for nothing apart from stating the obvious truth...
so as of now you can take your all your thanks and try and cash them in for the next phone you softbrick and "need" to pay someone else to fix...or maybe not!!!
as for me this discussion is closed as i can only feed a troll so much!!!
Click to expand...
Click to collapse
Just to say that I
chrons6 said:
I understand how the RUU works and how to use it. My problem, though I hope not, may be slightly more unique?
I had previously rooted by ONE S T-Mobile version and it had been working fine. I then decided to try out another rom. I likely flashed an incorrect boot img because it would only reboot into fastboot, but would still allow me to go into recovery. I went to recovery and restored my nandroid backup; however, now the phone will get stuck on the opening HTC screen the red language on the bottom, "this build is for development purposes only." It will hang on this screen for about 20 seconds and then turn off. No loop. When I attempt to power up again, I get a quick horizontal flash of light across my screen and then the orange LED comes on in the top left corner indicating the phone is charging. I then hold down power and again the phone gets stuck on the opening HTC screen with the red language.
My problem is that I cannot get the phone into fastboot
I've received advice on how to enter the bootloader: power off the phone manually by pressing power for 10+ seconds. Then I' should be able to enter the bootloader and fastboot. (Vol down + power)
Unfortunately, no matter how many times I try, using the above method and a variety of other methods, I still can't get past "HTC developmental purposes only" screen. I'm not new to android and have experience with a number of phones, but this is my first HTC. Pretty frustrating thus far. Rather than spend many more hours pulling out my hair and continually going in circles with no progress to show for my efforts, I'd rather pay someone to make the necessary fixes for me.
Any additional advice would be much appreciated.
Click to expand...
Click to collapse
Thankfully I finally figured out how to consistently get my phone to enter into Fastboot; however, no the trouble I'm having is finding the proper RUU. I've tried the 3 T-mobile varients available in the RUU depository found here
http://forum.xda-developers.com/showthread.php?t=2094414
But alas, while I am able to run the RUU program, which enters my phone into a mode where the screen is all black expect for the HTC logo in the middle, I keep on getting error codes. Are there more than 3 RUU varients identified in the depository?
Oh, I should note that I was also able to get into recovery, but my SD was unable to mount so I can't find my Nandroid
Youre at least half Way there, what recovery are you using?? If you can get your PC to see the device try and format the memory to fat32 from PC...
Sent from my One S using xda app-developers app
zubeedubs said:
Youre at least half Way there, what recovery are you using?? If you can get your PC to see the device try and format the memory to fat32 from PC...
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
I believe I'm using TWRP 6.3.0...I'm at work right now and without the phone, but I'm fairly confident that's the recovery. I'll to get the phone into USB mode and see if I'm offered the opportunity to format the memory.
By the way, thanks for the help...it's much appreciated.
chrons6 said:
I believe I'm using TWRP 6.3.0...I'm at work right now and without the phone, but I'm fairly confident that's the recovery. I'll to get the phone into USB mode and see if I'm offered the opportunity to format the memory.
By the way, thanks for the help...it's much appreciated.
Click to expand...
Click to collapse
That won't help. You can fix the sdcrad bug by flashing stock recovery via fastbot and preform "factory reset + clear storage"
Ok, so there was a thread on here for this issue, but it has been dead for 5 years so I hope it's ok I open this new thread.
I have been given a Samsung Tab 2 GT-P5110 by a colleague of mine. At some point in time he managed to corrupt the firmware to get the black screen of death 'firmware has encountered a problem.......'. This will not have been from flashing ROMs or attempting to root the device (he's an elderly guy, who recently asked me for help resetting his Google passwords, so rooting is well beyond his expertise). I first thought this won't be an issue, I'll hook it up to Odin, flash a recovery, stick it in download mode and then flash a new ROM...... However this failed, Odin confirming the process was unsuccessful. I understand this may be because the corruption is seated deeper than just the level of flashing a new ROM and have read flashing a new kernel may go deep enough to make progress, however, I have only ever used Odin for flashing ROMs so this is all new to me.
I would be very appreciative if someone was able to point me in the right direction, I have found some kernels to download which I think would be compatible, but I'm a little foggy on the steps I should take. Alternatively, someone may know another route to go down, I am also not afraid to open this little guy up and do some DIY surgery if needs be, after all I didn't buy the thing so I have nothing to lose.
Any suggestions would be great and if you want some more info please feel free to ask.
Thanks in advance.
elboobio said:
Ok, so there was a thread on here for this issue, but it has been dead for 5 years so I hope it's ok I open this new thread.
I have been given a Samsung Tab 2 GT-P5110 by a colleague of mine. At some point in time he managed to corrupt the firmware to get the black screen of death 'firmware has encountered a problem.......'. This will not have been from flashing ROMs or attempting to root the device (he's an elderly guy, who recently asked me for help resetting his Google passwords, so rooting is well beyond his expertise). I first thought this won't be an issue, I'll hook it up to Odin, flash a recovery, stick it in download mode and then flash a new ROM...... However this failed, Odin confirming the process was unsuccessful. I understand this may be because the corruption is seated deeper than just the level of flashing a new ROM and have read flashing a new kernel may go deep enough to make progress, however, I have only ever used Odin for flashing ROMs so this is all new to me.
I would be very appreciative if someone was able to point me in the right direction, I have found some kernels to download which I think would be compatible, but I'm a little foggy on the steps I should take. Alternatively, someone may know another route to go down, I am also not afraid to open this little guy up and do some DIY surgery if needs be, after all I didn't buy the thing so I have nothing to lose.
Any suggestions would be great and if you want some more info please feel free to ask.
Thanks in advance.
Click to expand...
Click to collapse
flash a custom recovery, and install this, https://builds.unlegacy-android.org/aosp-4.4/espresso/ua_espresso-4.4.4-20171105172717.zip
Thanks for the reply. I have attempted to flash a recovery, however every one I've tried fails and tells me 'NAND write failed'. I tried the TWRP recovery and philztouch. You don't have a link to a recovery you think might work? I'm pretty sure I've been using recoveries that should work, but you never know.
Hi all,
I've been ROM'ing since 2013 on multiple devices so I am somewhat familiar with adb/fastboot flashing and commands, what to do, what not to do, etc.... I just picked up a used pixel and first thing I did was unlock the bootloader - no problem. Next I go to root, so I began following this tutorial https://android.gadgethacks.com/how-to/root-your-google-pixel-pixel-xl-0174670/ , as instructed I DL the required drivers, image files, patch file etc...and follow this tutorial for installing TWRP https://android.gadgethacks.com/how-to/install-twrp-custom-recovery-your-pixel-pixel-xl-0175163/ , I get to step 8 and instruct via the command window to fastboot boot twrp.img, just as instructed. Everything appeared to be going the way it should as it started to boot to TWRP but almost as quickly the phone just died. I mean dead as a door nail. It won't do a thing. It won't even charge now. I have never had a phone just die like this. I fear I have met my first true full on brick.
I mean, yeah, I have soft bricked phones many a times but always had a backup to restore or was able to dig my way out one way or another but that was explainable by messing with questionable ROM's or something similar. Here I was just booting to the phone specific most recent version of TWRP by a solid well known tutorial with solid links, no indication that these could be the wrong images or zip's at all....but I'll be damned if this phone is dead as hell. I'm hoping someone can shed some light as to what happened or even miraculously tell me that it can be fixed.
Guys, is this a worst case scenario full on brick with no hope or getting it back to life? If so, why? Where did I go wrong? If this is going to be what I fear it is I hope to at least understand how it happened so I can avoid it in the future. This was a very expensive F-up on my part. I am beside myself with grief and disbelief that I could have done this with as many times as I have unlocked bootloaders, rooted, installed TWRP, flashed ROM's, etc.. I mean I 'm not the best but I am not a noob by any means. I feel like such a dumb ass right now!
Appreciate any help or explanation anyone can offer. Thanks.
We don't flash avb or any other patches anymore and haven't for like an android version and a half. For future reference look for more current information when modding a phone and for simple things like root guides go to xda don't just ask Google.
@kerryh420,
Those are some pretty old tutorials!
After plugging in the charger and wait for say 10seconds, can you boot into bootloader with button combo?
(Power + volume down or power + volume up for recovery as alternative)
Cheers
Sent from my Galaxy Tab S2 8.0 using XDA Labs
No offense, if you've been ROM'ing since 2013 you'd know not to go to other websites for tutorials! XDA is your best friend to follow instructions on Rooting, Flashing a recovery, and etc! Sorry that happened to ya. If it's literally dead you're probably out of luck and I know that's not what you want to hear. My best advice is to not follow tutorials on other websites. Good luck on your next device!