If like me you have installed JUI via Fastboot but you have realized that has several problems such as: CPU 1.6GHz, Infrared disabled, touch screen in some games laggy and Google Chrome crashes, today we're going to reinstall the EUI of GrossoShop with TWRP Recovery.
WARNING: I and the forum are not responsible for any damage that you will find in your device, as always i have tested this guide found on 4PDA (Russian forum similar to XDA) then translated into English. This guide has been tested on the 6GB RAM variant, I do not know if the 4GB version works perfectly.
NOTE: All files can be found at the bottom of the thread!
REQUIREMENTS:
Device with JUI ROM installed
PC
USB cable
Follow the guide carefully
STEP 1: TWRP 3.1.1.0 Installation
1) First of all we must install the Recovery TWRP then download the ZIP file containing the TWRP 3.1.1.0
2) Unpack the file where you want, and open the CMD in the folder
3) Check in the device if in the settings the OEM unlocking is activated, then go to Settings > device information and press 5 times on Number Build, now go in the Developer Options and check if the option is activated
4) Now turn off the device and restart it in Fastboot Mode, to start the device in Fastboot Mode press the power button + volume key down after connect the device to the PC
5) If you are on Windows 7 most likely the device will be recognized while if you are on Windows 10 the device will not be recognized so we have to install the drivers manually, so you have to hold down the power button until it shuts down and start the system normally. As you will see on the PC you will open a unit containing a setup to install, install the setup (the device must always be connected to the PC). Now restart the device in Fastboot Mode power button + volume key down and connect it to the PC. Now if you open the control panel and go to device management the device is not recognized, so we have to install manually the drivers, then right click on the unknown device - properties - driver - update driver - look for the driver software in the computer - browse ... now you have to go to C:\Program Files (x86) and choose the yulong folder. Well now the drivers are installed correctly.
6) Now we can install the TWRP Recovery, so let's go back to the previously opened CMD and type these commands in sequence
Code:
fastboot oem unlock-go
Code:
fastboot flash recovery recovery.img
Code:
fastboot boot recovery.img
Now the device will be restarted in Recovery Mode and you will see the TWRP 3.1.1.0 installed to change the language press the right button and make a swipe to confirm.
STEP 2: Revert to EUI (change Bootloader and EUI Installation)
7) At this point we have to do a conversion of the bootloader, but first we have to do a Factory Reset and then we will lose all the data like photos, music, etc., then save the important data in your PC and continue with the guide, now from Recovery go on Wipe, click on Format Data and type Yes to confirm, at the first attempt the recovery can give you some errors written in red, do not panic return to the home of the recovery go to Reboot and select Recovery. Once back in the Recovery we make Format Data again and this time it should work without problems. Once you've done this, let's go on Wipe again, go to Advanced Wipe and select: Dalvik / ART Cache, System, Data, Internal Storage, Cache and do a swipe to confirm.
8) Once the device is completely cleaned, download the conversion file (that you find at the bottom of the thread) and copy it to the device from recovery, after we go to Install, select the zip file and do a swipe to confirm, it will take a while of time do not worry. Once finished go on Reboot and select System, most likely the device will not start you will always see the Coolpad logo do not panic, force the shutdown by holding down the power button and restart it in recovery mode by holding down the power button + volume key up. Now we have to do an advanced cleaning so go to Wipe > Advanced Wipe, select Dalvik / ART Cache, System, Data, Cache and do a swipe to confirm. Now copy the GrossoShop ROM in your device, go to Install select the ZIP file and do a swipe to confirm, wait for the ROM to be installed, after go to Reboot and press on System.
Perfect! We brought our Cool Changer S1 back to original ROM!
DOWNLOAD SECTION:
Conversion Rom (bootloader): https://drive.google.com/file/d/1xqau8Rm-USvF33ioH2LKkWFf_D8m_faI/view
EUI GrossoShop ROM: https://mega.nz/#!YVdDHQTT!pCOA8P0eCoy9bPhiqrBdNF1Dg5tjL3CB_DV6ImlSBVI
TWRP 3.1.1.0: https://drive.google.com/file/d/1FgSIy2vpl9QkmndYCD9NMzLM5rHqLJkM/view
Original Thread (Russian): https://4pda.ru/forum/index.php?showtopic=822330&st=2920#entry70707812
Thanks To:
4PDA Forum
Androidiani Forum
GrossoShop Blog
@Danny_Dewet I have a problem after Step 1, TWRP ask me about a password to decrypt data...
My pin doestn work, My screen code doesnt work... and I'm sure never did or choseen a password for this....
whats happen? If I reboot to system, ask me too.
ozerec88 said:
@Danny_Dewet I have a problem after Step 1, TWRP ask me about a password to decrypt data...
My pin doestn work, My screen code doesnt work... and I'm sure never did or choseen a password for this....
whats happen? If I reboot to system, ask me too.
Click to expand...
Click to collapse
Strange, Reboot into Bootloader reinstall JUI via fastboot and try again.
Danny_Dewet said:
Strange, Reboot into Bootloader reinstall JUI via fastboot and try again.
Click to expand...
Click to collapse
Jui? How Can Install Jui via Fastboot?
but does the system start?
Danny_Dewet said:
but does the system start?
Click to expand...
Click to collapse
Yes, yes, but request me 'the code'
what do you think? maybe twrp version? I dont know..
ozerec88 said:
Yes, yes, but request me 'the code'
what do you think? maybe twrp version? I dont know..
Click to expand...
Click to collapse
Can you use the phone or always ask for the code?
Anyway to reinstall the JUI you have to download this:
https://mega.nz/#!p5N1naAR!jkGL6TSRTrk7iyp7CpOhtN6whQKg6Ti6R27hB-d5qxY
install it from bootloader (Power button + volume key down) open the file fastboot_flash.bat
Danny_Dewet said:
Can you use the phone or always ask for the code?
Anyway to reinstall the JUI you have to download this:
https://mega.nz/#!p5N1naAR!jkGL6TSRTrk7iyp7CpOhtN6whQKg6Ti6R27hB-d5qxY
And install it from bootloader (Power button + volume key down)
Click to expand...
Click to collapse
Its impossible, always ask for the code.
Do you think reinstalling JUI will work then?
What are the steps to flash JUI Trough Fastboot?
ozerec88 said:
Its impossible, always ask for the code.
Do you think reinstalling JUI will work then?
Click to expand...
Click to collapse
in theory yes, since you had the same ROM.
To flash: reboot you phone into bootloader (power button + volume key down), plug your phone on PC, unpack file ROM, open fastboot_flash.bat and wait.
Danny_Dewet said:
To flash: reboot you phone into bootloader (power button + volume key down), plug your phone on PC, unpack file ROM, open fastboot_flash.bat and wait.
Click to expand...
Click to collapse
maybe this?
http://www.coolpadforums.com/forum.php?mod=viewthread&tid=21018
ozerec88 said:
maybe this?
http://www.coolpadforums.com/forum.php?mod=viewthread&tid=21018
Click to expand...
Click to collapse
You use TWRP 3.1.1.0?
Danny_Dewet said:
You use TWRP 3.1.1.0?
Click to expand...
Click to collapse
yes, the link that you attached at the bottom of the tutorial. No?
ozerec88 said:
yes, the link that you attached at the bottom of the tutorial. No?
Click to expand...
Click to collapse
Yes you have green color?
Danny_Dewet said:
Yes you have green color?
Click to expand...
Click to collapse
What do you mean?
Uff.. finally I am in Jui, AGAIN xD
It's starting first time...
I dont know why the code in twrp..:silly::silly::crying:
ozerec88 said:
What do you mean?
Uff.. finally I am in Jui, AGAIN xD
It's starting first time...
I dont know why the code in twrp..:silly::silly::crying:
Click to expand...
Click to collapse
Nice let me know
Danny_Dewet said:
Nice let me know
Click to expand...
Click to collapse
so now, what? Have I to start again ?
ozerec88 said:
so now, what? Have I to start again ?
Click to expand...
Click to collapse
Yes but im not sure, wait have you installed the JUI or have you already found it?
Danny_Dewet said:
Yes but im not sure, wait have you installed the JUI or have you already found it?
Click to expand...
Click to collapse
I dont understand the question, I have come back to JUI 7.1 trough fastboot, I am like the beginning, again.
ozerec88 said:
I dont understand the question, I have come back to JUI 7.1 trough fastboot, I am like the beginning, again.
Click to expand...
Click to collapse
So you have installed JUI via fastboot now?
Related
my phone is stucked on the htc startup screen after installing a custom rom. Ive waited about an hour but it does not boot. Ive look around searching for a solution and ive found the following proccess but since i am a noob i dont know what it is talking about so can anyone explain in detail what to do?
Dont know where to get fasboot from or android SDK
What i found:
1. Extract boot.img from CyanogenMod zip file and move it in the same folder as your fastboot.exe (Android SDK)
2. Flash Cyanogen as usual using recovery (don't forget to wipe/format)
3. Boot into fastboot mode, connect your phone to your PC and flash boot.img using fastboot
Code:
fastboot flash boot $pathToYourBootIMG\boot.img
4. Reboot
maau1 said:
my phone is stucked on the htc startup screen after installing a custom rom. Ive waited about an hour but it does not boot.
Click to expand...
Click to collapse
Did you wipe the dalvik cache? (if you didn't, then do so and reboot) If you did, then do a full wipe of data/cache partitions, flash a different rom, wipe dalvik cache and reboot.
Theonew said:
Did you wipe the dalvik cache? (if you didn't, then do so and reboot) If you did, then do a full wipe of data/cache partitions, flash a different rom, wipe dalvik cache and reboot.
Click to expand...
Click to collapse
yes i have done that already and i have tried different roms but i get the same result
maau1 said:
Dont know where to get fasboot from or android SDK
Click to expand...
Click to collapse
See here on how to install the Android SDK: http://wiki.cyanogenmod.com/wiki/Howto:_Install_the_Android_SDK. Fastboot is a tool included with it.
I have installed it but i dont know how to use it or what to do. can you explain the process i have on the top in more detail?
maau1 said:
I have installed it but i dont know how to use it or what to do. can you explain the process i have on the top in more detail?
Click to expand...
Click to collapse
Sure.
maau1 said:
1. Extract boot.img from CyanogenMod zip file and move it in the same folder as your fastboot.exe (Android SDK)
Click to expand...
Click to collapse
Use winrar, etc. to extract the rom placing the boot.img file (extracted from the rom) in the folder containing fastboot.exe.
maau1 said:
2. Flash Cyanogen as usual using recovery (don't forget to wipe/format)
Click to expand...
Click to collapse
Flash the rom.
maau1 said:
3. Boot into fastboot mode, connect your phone to your PC and flash boot.img using fastboot
Click to expand...
Click to collapse
Use the code in below to do it.
Code:
fastboot flash boot $pathToYourBootIMG\boot.img
maau1 said:
4. Reboot
Click to expand...
Click to collapse
Reboot your device.
how do i boot my device to fastboot?
maau1 said:
how do i boot my device to fastboot?
Click to expand...
Click to collapse
Power off
hold volume button down and power on at the same time. It will boot in your phone's "bios"
use volume rocker to go down until fastboot is highlighted, press power to select
You are now in fastboot mode. If you now plug in your usb cable TO A COMPUTER WHERE YOU HAVE YOUR PHONE'S DRIVERS INSTALLED, you will see a line change to usb-mode on your phone. (you can install drivers by installing HTC sync on your pc).
Open a dos prompt window on your computer (start - run - type 'cmd')
Go with the dos prompt to the folder where you have the necesarry SDK-files and your extracted boot.img.
Type the command: fastboot flash boot boot.img
takes around 2 secs.
Reboot
When i press the volume button and power i get a screen with several colors it doesnt give me any options and at the bottom is says serial, when i connect it it changes to USB. My divice is and hd2
Weird, it doesnt look sort of like this? (HTC boot)
maau1 said:
When i press the volume button and power i get a screen with several colors it doesnt give me any options and at the bottom is says serial, when i connect it it changes to USB. My divice is and hd2
Click to expand...
Click to collapse
You should have stated your device from the start. The HD2 is natively a Windows Mobile device, so it's bootloader is different. What rom were you trying to install (A Windows Mobile rom or Android rom)?
maau1 said:
My divice is and hd2
Click to expand...
Click to collapse
I read over that. I can't help you with a windows device, I have no knowlegde of it.
Soft Bricking ?
Phone starts and stuck on the Yu logo.
Hard Bricking?
Phone does not start even if the battery is full. Have to go to the service center.
[Note]
1.Make sure that you have 70-80% battery on your phone.
2.You need a PC and a USB cable to connect your phone to the PC.
3.Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
[Required Downloads]
1.Download the flash tools.
2. Download the factory firmware (signed fastboot)
3. adb setup drivers.
4. Mirror for drivers manual install here.
5. You can use this tool performs various functions.
# [Install Adb Derives Manually]
1. First of all extract the downloaded file and save it in the computer.
2. Before installation you have to disable the "signature verification" in windows. In windowa 8 or 10 you can do it by going to advanced settings or you can google the way of disabling signature verification.
3. After that turn off the phone and connect it pressing vol up that it will boot in fastboot mode.
4. When you connect the phone go device manager and search for device connected showing error sign.
5. Now click on that device and check for deriver update.
6. Now select the deriver in computer not automatically and select all devices.
7. Now select "have disk"
8. Browse the folder where you had extracted the adb drivers.
9. Now select the drivers file and install.
10. Ignores the Warning and select "always allow"
11. When finished check the device again by connecting to computer in fastboot mode with usb.
# [Flash Factory Firmware]
Steps
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. The first boot might take around 5-10 minutes to complete.
Congrats!
# [Recovey Installation (Very Easy Method)]
Note
1. Phone must has unlocked bootloader.
2. It must be rooted.
Steps
1. Download the twrp.img file and place it into your phone storage.( you can choose any custom recovery)
2. Now download the app from playstore flashify
3. Now install it and open the app it will require permission for root access, allow the root access.
4. Now open the app and u can backup the current recovery.
5. Now select the "flash" menu and select the "recovry image" and choose the .img file from storage.
6. Then select yes for flashing warning and will says flashing recovery. After completion it will say flash completed.
7. Now select the option button on right top corner and select the reboot into recovery.
8. Now it will reboot into recovery.
Hit "Thanks" if found this thread helpful....
Thanks for the solution...... it works well !!
Though my yuphoria was working perfectly fine, i wanted to factory reset my mobile for some reasons, which i was not able to do. Both soft and hard custom recovery options were not working (no recovery screen pop up, mobile boots and stuck at YU logo ), tried your solution and it worked.
Just one input for new users like me, where you have asked users to install adb drivers, i tried that part but on running the bat file, the device was not detected, hence had to add yuphoria device drivers from their official site, i am not able to paste the link here but file name is YUPHORIA_drivers-v1.0.zip, also USB debugging option needs to be turned on in developer option for this solution to work.
Rest all steps work exact as you explained.
Sahilsharma said:
Though my yuphoria was working perfectly fine, i wanted to factory reset my mobile for some reasons, which i was not able to do. Both soft and hard custom recovery options were not working (no recovery screen pop up, mobile boots and stuck at YU logo ), tried your solution and it worked.
Just one input for new users like me, where you have asked users to install adb drivers, i tried that part but on running the bat file, the device was not detected, hence had to add yuphoria device drivers from their official site, i am not able to paste the link here but file name is YUPHORIA_drivers-v1.0.zip, also USB debugging option needs to be turned on in developer option for this solution to work.
Rest all steps work exact as you explained.
Click to expand...
Click to collapse
Yup bro its difficult to set bootloader driver for yuphoria. But you can install it manually. But always remember to "disable driver signature verification" before installation and i will update the derivers link for manual installation if you message me the link.
will this work on unlocked bootloader
nickjones1007 said:
will this work on unlocked bootloader
Click to expand...
Click to collapse
"yup"... it will work. There is nothing to do with boot loader. It will flash the stock rom and boot-loader will get locked again. You have to unlock the boot-loader again if you want to flash custom rom again.
And i will get the official ota updates from YU as well ?
Sent from my YU5010 using Tapatalk
nickjones1007 said:
And i will get the official ota updates from YU as well ?
Sent from my YU5010 using Tapatalk
Click to expand...
Click to collapse
yep bro.. you will get the updates and i don't think you know that, there are no restrictions for unlocking/locking boot-loader of YU mobile. I mean the warranty not void if you unlock the boot-loader.
Thnx a lot bro and yeah i knw that ... Actually i'm gonna start installing roms so in case if it goes wrong i just a needed reliable method to get back on stock company's software ....
Thnx again bro
Sent from my YU5010 using Tapatalk
nickjones1007 said:
Thnx a lot bro and yeah i knw that ... Actually i'm gonna start installing roms so in case if it goes wrong i just a needed reliable method to get back on stock company's software ....
Thnx again bro
Sent from my YU5010 using Tapatalk
Click to expand...
Click to collapse
its reliable bro and worked for me when i screwed my phone. But note one thing that you should have installed the adb drivers properly on your computer. Anyway if u screwed up don't hesitate to discuss here.
When i start the flashall.bat the phone restarts and stuck back at the cyanogen logo..!
goudaniket said:
When i start the flashall.bat the phone restarts and stuck back at the cyanogen logo..!
Click to expand...
Click to collapse
Is driver properly installed? Or retry to download setup again if you have done right then
1. boot into bootloader
2. run bat file it will take some time. If all goes well then it will say about relocking of boot-loader.
3. seletct yes and restart.
4. you will see yu logo and it will take 10-15 minutes to load so stay calm! If it doesn't load then try again.
awesome... worked for me
maazkazi91 said:
awesome... worked for me
Click to expand...
Click to collapse
You can simply hit the thanks buttton bro
Can u remember me?
I can't root my YU 5010a
ankityu said:
I can't root my YU 5010a
Click to expand...
Click to collapse
I think you have issue with adb driver .. Is that resolved?
No man
...its still stuck in there..
ankityu said:
No man
...its still stuck in there..
Click to expand...
Click to collapse
Bro i hv updated the thread with steps to install adb drivers. Try it and then report if it works.
What is signed fastboot
ankityu said:
What is signed fastboot
Click to expand...
Click to collapse
Install it . these are the drivers.
Hi I've unlocked the bootloader of my phone but I can't find any recoveries to push through ADB, therefore I can't flash SU. Does someone have a solution ?
Allright, for the newcomers, I've found a solution for this : (it is very important that you don't update your rom if you've rooted your phone, unless you want a 150$ brick I guess !)
Don't forget to install adb before anything
1. Enable USB debugging in developers option.
2. Connect your phone to a computer and then launch cmd. Type «adb reboot fasboot».
3. Once in fastboot mode we will flash TWRP by typing this : «fastboot flash recovery 1streco.img».
4. Unplug and reboot your device, on the nag screen keep pressing the up volume button to enter recovery. If it doesn't work then choose shutdown and hit all three buttons while it's booting.
5. Once you are in TWRP, backup everything to extsdcard.
6. Go to wipe and format /data and wipe it under advanced wipe. DO NOT TOUCH ANY OTHER PARTITION !!! ONLY DATA.
7. Once it's done reboot the device. You should have a message telling you that the encryption failed, click reset phone.
8. It should launch TWRP choose reboot to bootloader.
9. Once in fastboot mode type this : «fastboot flash recovery 2ndreco.img» then type : «fastboot reboot».
10. Your phone should now display : «Factory reset low level» when you click reset phone. Once it's done it will automatically reboot but don't let it finish his boot sequence yet. On the nag screen keep pressing the up volume to enter recovery and then choose shutdown.
11. Boot in fastboot mode again and type : «fastboot flash recovery 1streco.img», then : «fastboot reboot».
Hold the vol.up button while on nag screen to enter TWRP.
If you don't enter TWRP after you typed fastboot reboot and hit the vol.up button but you enter erecovery that's ok, in this case what you need to do is to choose shutdown. Then hold vol.up, vol.down and power buttons to enter TWRP ! Go to install and flash magiskv13.3.zip and voilà your phone is now rooted !
I've not tried but I think you could restore the data partition with TWRP once you've done all those steps but I can't guarantee you anything so this is why I've told you to backup your data.
1streco.img file link here
2ndreco.img file link here
Magisk v13.3 link here
Si I've been able to install twrp but when I try to flash SuperSu.zip it doesn't work. It's crazy !
For those who wants to know, I've tried everything and the only way to go is to format and wipe data in order to disable dm-verity. But if you do that you won't be able to go further because the rom asks you to crypt your datas before continuing....
Ilovelife76 said:
For those who wants to know, I've tried everything and the only way to go is to format and wipe data in order to disable dm-verity. But if you do that you won't be able to go further because the rom asks you to crypt your datas before continuing....
Click to expand...
Click to collapse
hi, please you can explain me how to obtain root? I have unlocked the bootloader of my phone. Sorry my english. thanks
I'll explain it when I'll be back home and I'll upload files here. You will lose everything tho so backup all your data now
Ilovelife76 said:
I'll explain it when I'll be back home and I'll upload files here. You will lose everything tho so backup all your data now
Click to expand...
Click to collapse
So, Ilovelife76, have you managed to root your Honor 6C successfully? (And how, if so? )
Ilovelife76 said:
I'll explain it when I'll be back home and I'll upload files here. You will lose everything tho so backup all your data now
Click to expand...
Click to collapse
Long-time away from home
I Need to root my Honor 6C... Can anyone help me ?
sub7even12 said:
I Need to root my Honor 6C... Can anyone help me ?
Click to expand...
Click to collapse
He is away from home it seems and no confirmation on rooting. More wait.
Ilovelife76 said:
I'll explain it when I'll be back home and I'll upload files here. You will lose everything tho so backup all your data now
Click to expand...
Click to collapse
Still away from home.
Here's the solution
Hi guys ! Sorry for the wait but here it is, my tutorial to the graal, root on this device :
1. Enable USB debugging in developers option.
2. Connect your phone to a computer and then launch cmd. Type «adb reboot fasboot».
3. Once in fastboot mode we will flash TWRP by typing this : «fastboot flash recovery 1streco.img».
4. Unplug and reboot your device, on the nag screen keep pressing the up volume button to enter recovery. If it doesn't work then choose shutdown and hit all three buttons while it's booting.
5. Once you are in TWRP, backup everything to extsdcard.
6. Go to wipe and format /data and wipe it under advanced wipe. DO NOT TOUCH ANY OTHER PARTITION !!! ONLY DATA.
7. Once it's done reboot the device. You should have a message telling you that the encryption failed, click reset phone.
8. It should launch TWRP choose reboot to bootloader.
9. Once in fastboot mode type this : «fastboot flash recovery 2ndreco.img» then type : «fastboot reboot».
10. Your phone should now display : «Factory reset low level» when you click reset phone. Once it's done it will automatically reboot but don't let it finish his boot sequence yet. On the nag screen keep pressing the up volume to enter recovery and then choose shutdown.
11. Boot in fastboot mode again and type : «fastboot flash recovery 1streco.img», then : «fastboot reboot».
Hold the vol.up button while on nag screen to enter TWRP.
If you don't enter TWRP after you typed fastboot reboot and hit the vol.up button but you enter erecovery that's ok, in this case what you need to do is to choose shutdown. Then hold vol.up, vol.down and power buttons to enter TWRP ! Go to install and flash magiskv13.3.zip and voilà your phone is now rooted !
I've not tried but I think you could restore the data partition with TWRP once you've done all those steps but I can't guarantee you anything so this is why I've told you to backup your data.
1streco.img file link here
2ndreco.img file link here
Magisk v13.3 link
Hey, great that you found your way home.
Ilovelife76 said:
1streco.img
2ndreco.img
Click to expand...
Click to collapse
Can you tell us a little more about these two files? Where have you found them? (Not wanting to sound too paranoid but you know...)
I've found 1streco.img on a Chinese board. It's the work of a guy who managed to make TWRP available to us, users of honor 6c. The second one is the standard recovery image of Honor 6c. Those files are good, don't worry. Once your phone is rooted and everything works good, you can of course update magisk through TWRP to the lastest version.
OK, I have been trying around now for an hour or so... I have one real problem and one possible problem:
1. (the real one) Using Win7 64 bit, each time I send the the phone into fastboot mode, the system tries to install "MTP USB device" drivers... without any success so far. That's why the phone boots normally again. I haven't been able to solve that so far (installed HiSuite for example, didn't help).
2. (the possible one) Should the bootloader be unlocked? If yes, I have to admit I haven't found a way to do that so far. :-/
Of course the bootloader must be unlocked before doing anything, you can request a code here on Huawei website : http://en.ui.vmall.com/plugin.php?id=unlock
bravo there is machine back or full backup with recovery
Did you manage to root your phone ?
beautiful, can you install a module on magisk? if yes how because when installing the modules I get a failure when editing magisk.img thanks ?
No, you can't because of dm-verity, you.can manually install via recovery tho.
For the Russian version 6s failed to implant. ADB reboot fastboot this command does not put the phone in fastboot mode.
Hi, i install android P beta one my One plus 6, then i downgrade its good. I start my phone and at the step copy apps & data i selec: Set up as new. Then i connec my wifi or LTE. I click next and my phone watch the next step and instant backwards. I cannot go in my os. I try everythings, fasstboot, wipe cache reset all. I go the Error in time : Google plays stop working, but i can do anything.
Same problem here. I need serious help
d3dev said:
Same problem here. I need serious help
Click to expand...
Click to collapse
I contact the support one plus, i send my phone for repair ....
w4n7ed said:
I contact the support one plus, i send my phone for repair ....
Click to expand...
Click to collapse
You flashing ROMs or betas isn't something they will cover under warranty
TechOut said:
You flashing ROMs or betas isn't something they will cover under warranty
Click to expand...
Click to collapse
I nothing flashing, i just update my phone with android P and downgrade with oxygen OS
w4n7ed said:
Hi, i install android P beta one my One plus 6, then i downgrade its good. I start my phone and at the step copy apps & data i selec: Set up as new. Then i connec my wifi or LTE. I click next and my phone watch the next step and instant backwards. I cannot go in my os. I try everythings, fasstboot, wipe cache reset all. I go the Error in time : Google plays stop working, but i can do anything.
Click to expand...
Click to collapse
Okay so I found a somewhat working solution after 10hrs of trying to get this to work.
1. Get fastboot and ADB package and install it on your PC.
2. Get the Developer Preview ROM and move it to your adb and fastboot install directory.
3. Get TWRP from the official website for OnePlus 6. Only the .img file and put it in the same folder. - here - dl(.)twrp(.)me/enchilada/
4. Go to the ADB and Fastboot install directory and click "CMD-HERE.exe".
5. Hold down the power and vol. down button and enter recovery mode. Then click on advanced options and from there boot into Fastboot.
6. When successfully in Fastboot mode, use this command in the CMD that opens :
Code:
fastboot boot twrp-3.2.1-0-enchilada.img
You should enter into TWRP recovery.
7. Type this command :
Code:
adb push OnePlus6Oxygen_DP1_180516.zip /sdcard/
8. Now click on install and scroll down until you see the ROM we just moved to the phone and install it. It should install successfully and after that reboot your device and you will be able to set up your device successfully.
After that, if you wish to return to Stable release then FOLLOW THE INSTRUCTIONS ON THE OFFICIAL POST ON THE ONEPLUS FORUMS
Introduction
I've been researching on how to install TWRP on Zenfone Max with Final Marshmallow update for a long time, and finally found and gathered information on how to do so without any consequences. So if you're on final Marshmallow update and want to install TWRP on your phone, then this guide is for you! P.S. This is for Z010D only.
How To Install TWRP
1. Download this APK on your phone to unlock your bootloader : https://drive.google.com/open?id=0B-0qEY9zypslUTFKRE5CQUU5OFk
The app says it will wipe all data, but with my experience it doesn't wipe any data at all. However, I still recommend you to take a backup.
2. Download this zip to your computer and extract it : https://drive.google.com/file/d/0B2kFletApi72QkRLZnFURDUyZk0/view
3. Download this TWRP 3.2.3-0 image : https://sourceforge.net/projects/an...covery/TWRP-3.2.3-Z010D-20180729.img/download
4. Merge the TWRP 3.2.3 image to the extracted zip
5. Make sure you have USB Debugging on and put your phone into Fastboot mode [Hold Volume Up + Power] and connect it to the computer
6. In the extracted zip folder search bar, type 'cmd' and press Enter
7. Type 'fastboot devices' and press Enter, to see if your phone is detected
8. Type 'fastboot flash recovery TWRP-3.2.3-Z010D-20180729.img' and press Enter
9. Disconnect the phone and Hold 'Volume Down + Power', when you see the ASUS logo let go the Power, but keep holding Volume Down until you see the TWRP logo
Congratulations, you've successfully installed TWRP!
Video
If you're too lazy to read like me, here's the video : https://www.youtube.com/watch?v=EwuiHBIts7M
WhatzIt2Ya said:
Introduction
I've been researching on how to install TWRP on Zenfone Max with Final Marshmallow update for a long time, and finally found and gathered information on how to do so without any consequences. So if you're on final Marshmallow update and want to install TWRP on your phone, then this guide is for you!
Before We Get Started
Download these files on your phone and move it to the root of the storage :
1. Magisk 17.1 : https://github.com/topjohnwu/Magisk/releases/download/v17.1/Magisk-v17.1.zip
2. (Optional) TWRP 3.1.1 image : https://androidfilehost.com/?fid=745849072291687209
How To Install TWRP
1. Download this APK on your phone to unlock your bootloader : https://drive.google.com/open?id=0B-0qEY9zypslUTFKRE5CQUU5OFk
The app says it will wipe all data, but with my experience it doesn't wipe any data at all. However, I still recommend you to take a backup.
2. Download this zip to your computer and extract it : https://drive.google.com/file/d/0B2kFletApi72QkRLZnFURDUyZk0/view
3. Make sure you have USB Debugging on and put your phone into Fastboot mode [Hold Volume Up + Power] and connect it to the computer
4. In the extracted zip folder search bar, type 'cmd' and press Enter
5. Type 'fastboot devices' and press Enter, to see if your phone is detected
6. Type 'fastboot flash recovery Z010_3.0.0.t1_without_su.img' and press Enter
7. Disconnect the phone and Hold 'Volume Down + Power', when you see the ASUS logo let go the Power, but keep holding Volume Down until you see the TWRP logo
Congratulations, you've successfully installed TWRP!
Optional If you've downloaded TWRP 3.1.1 image, headover to 'Install' and select 'Install Image', then select the TWRP 3.1.1 image, then select Recovery and finally swipe to flash to update TWRP. To reboot back into recovery, press home, select reboot, and then recovery. You should see the TWRP version 3.1.1 upon reboot.
How To Root with TWRP
1. Boot into recovery and select 'Install'
2. Select Magisk zip and swipe to flash
3. Reboot to your OS, you should see a new app that is Magisk
Congratulations, you've successfully installed TWRP and Magisk!
Video
If you're too lazy to read like me, here's the video : https://www.youtube.com/watch?v=EwuiHBIts7M
Click to expand...
Click to collapse
Hey bro , seems you've been in mars and just arrived on Earth ! There's no issue whatsoever with installing twrp and rooting ZC550KL, there are lots of threads and video on YouTube about this for more than a year now.
jide1 said:
Hey bro , seems you've been in mars and just arrived on Earth ! There's no issue whatsoever with installing twrp and rooting ZC550KL, there are lots of threads and video on YouTube about this for more than a year now.
Click to expand...
Click to collapse
Yes, but some comments have issues where will it work with different versions (or updates), as the last update ASUS pushed was around Dec 17/Jan 18 with November 2017 security patch, some of the guides I've tried have failed, or had some issues. Also, some guides tell you to downgrade to marshmallow beta. Anyways, I just thought to do a final guide to root. ?
WhatzIt2Ya said:
Yes, but some comments have issues where will it work with different versions (or updates), as the last update ASUS pushed was around Dec 17/Jan 18 with November 2017 security patch, some of the guides I've tried have failed, or had some issues. Also, some guides tell you to downgrade to marshmallow beta. Anyways, I just thought to do a final guide to root.
Click to expand...
Click to collapse
so basically, is it all about unlocking the bootloader something to root the phone or what?
Singhisme said:
so basically, is it all about unlocking the bootloader something to root the phone or what?
Click to expand...
Click to collapse
Obviously, you need an unlocked bootloader to do any modifications! The only issue is, Asus phones don't show whether you have an unlocked bootloader or not. Sometimes the bootloader unlocker fails.
Jt380p said:
Obviously, you need an unlocked bootloader to do any modifications! The only issue is, Asus phones don't show whether you have an unlocked bootloader or not. Sometimes the bootloader unlocker fails.
Click to expand...
Click to collapse
Then how to be sure my device is locked or unlocked then?
Singhisme said:
Then how to be sure my device is locked or unlocked then?
Click to expand...
Click to collapse
Theres no sign. You just have to trust the app, unfortunately.
Urgent
Hi sir same way i did but TWRP is not showing.only black screen is displaying and i cant restart my phone please help me sir
twrp not showing
Jt380p said:
Theres no sign. You just have to trust the app, unfortunately.
Click to expand...
Click to collapse
I figure it out somehow.. there's something to do with ADB to check by this far it is the only way I know. thanks for the TWRP btw.. Good works!
Jt380p said:
Introduction
I've been researching on how to install TWRP on Zenfone Max with Final Marshmallow update for a long time, and finally found and gathered information on how to do so without any consequences. So if you're on final Marshmallow update and want to install TWRP on your phone, then this guide is for you! P.S. This is for Z010D only.
How To Install TWRP
1. Download this APK on your phone to unlock your bootloader : https://drive.google.com/open?id=0B-0qEY9zypslUTFKRE5CQUU5OFk
The app says it will wipe all data, but with my experience it doesn't wipe any data at all. However, I still recommend you to take a backup.
2. Download this zip to your computer and extract it : https://drive.google.com/file/d/0B2kFletApi72QkRLZnFURDUyZk0/view
3. Download this TWRP 3.2.3-0 image : https://sourceforge.net/projects/an...covery/TWRP-3.2.3-Z010D-20180729.img/download
4. Merge the TWRP 3.2.3 image to the extracted zip
5. Make sure you have USB Debugging on and put your phone into Fastboot mode [Hold Volume Up + Power] and connect it to the computer
6. In the extracted zip folder search bar, type 'cmd' and press Enter
7. Type 'fastboot devices' and press Enter, to see if your phone is detected
8. Type 'fastboot flash recovery TWRP-3.2.3-Z010D-20180729.img' and press Enter
9. Disconnect the phone and Hold 'Volume Down + Power', when you see the ASUS logo let go the Power, but keep holding Volume Down until you see the TWRP logo
Congratulations, you've successfully installed TWRP!
Video
If you're too lazy to read like me, here's the video :
Click to expand...
Click to collapse
anyone have working oem unlock tool for asus zenfone max (zc550kl).
tried so many tools,nothing worked for me
Android_Rom_OTA for ASUS Zenfone Max ZC550KL[Z010D]
Android_Rom_OTA:
Released /LineageOS-OMS/Z010D/lineage-14.1-20180821-UNOFFICIAL-Z010D-OMS.zip
Released /OreoTest/lineage-15.1-20180817-UNOFFICIAL-Z010D.zip
Released /TWRP_Recovery/TWRP-3.2.3-Z010D-20180729.img
Released /LineageOS/Z010D/lineage-14.1-20180729-UNOFFICIAL-Z010D.zip
Download Android_Rom_OTA