Database Info

Help Locating GOOD firmware file...

So I borked my 8gig P3113 and have been trying to two days to find a firmware file that actually works. I can't seem to find one. Everything I download (including from the sammobile site) is either an invalid archive (can't even open it with zipgenius) or for the single file I did manage to unzip had a mismatched md5 so failed the odin check.
The file I've been trying to download is P3113UEUCMK3_P3113XARCMK3_XAR.zip but ANY firmware file that will work in my device is fine with me... I don't care at this point I just want to get it up and running again. While I can get into download mode so repair should be quick and simple, at this point - without a good/working firmware file, my tab is dead.
Can anyone help?

I've never had a problem with sammobile. Do you have a decent internet connection?
jrc2
Sent from my GT-P3110 using Tapatalk.

i do... well i think i do anyway. it's good, not great. dsl. took about an hour to download the file from sammobile. the download appeard to complete fine, but i couldn't get it to extract with either zipgenius or the built in windows extractor.

i do... well i think i do anyway. it's good, not great. dsl. took about an hour to download the file from sammobile. the download appeard to complete fine, but i couldn't get it to extract with either zipgenius or the built in windows extractor.
EDIT: sorry for double post.
jrc2 said:
I've never had a problem with sammobile. Do you have a decent internet connection?
jrc2
Sent from my GT-P3110 using Tapatalk.
Click to expand...
Click to collapse

Look here https://www.androidfilehost.com/?w=search&s=p3113 you may get lucky.
Also here
http://forum.xda-developers.com/showthread.php?p=31897211
Pp.

Help: tried to flash recovery N8000, failed

Hello, here a plea for help.
I tried to flash my stock N8000 via this post: https://forum.xda-developers.com/showthread.php?t=1957002
I did try this several times, but it never completed: see the attached screen shot of what happens.
Now the device no longer boots normally. It begins to boot, then hangs on the Samsung logo.
Can someone help me here, as the original post seems dead....
thanks.

Start by flashing stock rom through Odin .

JJEgan said:
Start by flashing stock rom through Odin .
Click to expand...
Click to collapse
Hello, and thanks for responding. Could you give me a hint/howto on where the standard ROM might be, and how to flash, or where to read up on that?
Sorry, a bit of a noob on this...
thanks.

Firmware Updato.com or sammobile.com
howto use odin
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin

JJEgan said:
Firmware Updato.com or sammobile.com
howto use odin
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Click to expand...
Click to collapse
Thanks. Am driving right now. I'll try this later this evening.
Sent from my SM-N920C using Tapatalk

JJEgan said:
Firmware Updato.com or sammobile.com
Hello, as the device no longer boots its difficult to tell exactly which device it is, as there are at least 4 devices that seem to fit my device description. I've got the N8000, from GErmany, i received it as part of a package from E-plus. From that information there are 4 device ROM's available....one as late as 2015. Which should i take?
thanks again.
Click to expand...
Click to collapse

Hello,
I do need some help now. I believe i've followed all directions, but am not having success.
Again, my device is a Samsung N8000 Note 10.1. Purchased from Eplus Germany
I have read the directions in how to use Odin, and have followed them precisely.
Drivers installed.
Original Firmware downloaded (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar). But, in the compresesed file that I downloaded there was also another file (SS_DL.dll). Anyone know what this means?
I copied both files into the directory of Odin v3.12.13.
began Odin, then put the tablet into download mode, then connected it to my computer. There was a sound from my computer recognizing the tablet.
I then added the file firmware file (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar) into Odin under the AP tab. I checked that the re-partiton box was not checked, then klicked onto Start. But Odin failed after about 3 seconds.
Can anyone please help me here?
thanks.

Use tar file only .
<I copied both files into the directory of Odin v3.12.13.>Never heard of that before .
At a guess Odin cannot find the file or its not connected ID Box in odin shows as connected

Hello out there community...no one out there that can help me here? Please? ....
tjohnso1 said:
Hello,
I do need some help now. I believe i've followed all directions, but am not having success.
Again, my device is a Samsung N8000 Note 10.1. Purchased from Eplus Germany
I have read the directions in how to use Odin, and have followed them precisely.
Drivers installed.
Original Firmware downloaded (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar). But, in the compresesed file that I downloaded there was also another file (SS_DL.dll). Anyone know what this means?
I copied both files into the directory of Odin v3.12.13.
began Odin, then put the tablet into download mode, then connected it to my computer. There was a sound from my computer recognizing the tablet.
I then added the file firmware file (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar) into Odin under the AP tab. I checked that the re-partiton box was not checked, then klicked onto Start. But Odin failed after about 3 seconds.
Can anyone please help me here?
thanks.
Click to expand...
Click to collapse

JJEgan said:
Use tar file only .
<I copied both files into the directory of Odin v3.12.13.>Never heard of that before .
At a guess Odin cannot find the file or its not connected ID Box in odin shows as connected
Click to expand...
Click to collapse
Thanks for this. I will try this when i'm home this evening...hope it works. Thanks!

tjohnso1 said:
Thanks for this. I will try this when i'm home this evening...hope it works. Thanks!
Click to expand...
Click to collapse
Hello, sorry but i need some more help here please.
I've downloaded what i believe is the stock firmware for my device from updato.com: GT-N8000_EPL_1_20150303173500_n47626s3xd
This is a zipped package with two file in it:
N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar.md5
and
SS_DL.dll
I've put both of these files into the directory where ODIN is. I have downloaded and tried serveral ODIN versions: v1.85, v3.10.6, v3.12.7, v3.12.3, v3.07
None of them work. After loading the tar file, ODIN begins, then after about 3 seconds stops and show the message "fail".
Attached is a screen shot of ODIN once i've loaded the tar file, and one that shows after the fail.
I've also added a picture of my note 10.1 N8000 while in download mode.
Anyone can help me here?
thanks.

Download file .
Unzip file .
Put file on desktop .
Open Odin
Locate tar file only and add to PDA or AP
firmware that you are trying to install is a downgrade and the secure bootloader (sboot) is blocking it.

JJEgan said:
Download file .
Unzip file .
Put file on desktop .
Open Odin
Locate tar file only and add to PDA or AP
firmware that you are trying to install is a downgrade and the secure bootloader (sboot) is blocking it.
Click to expand...
Click to collapse
Hello, and thanks.
What you have described above is exactly what i am doing. Are you saying that the reason it does not work is because the bootloader is blocking it? If so, how do i get around this?
I would really like to "upgrade", rather than downgrade. But at the moment i cannot find any other firmwares for my device. A few years ago I saw several ones, but not anymore.
Do you have a suggestion of which firmware I should install, and where i can get this?
Again, thanks so much for your help! I really appreciate it.

Looking at sammobile and updato last firmware is .
N8000XXSDQA7 android 4.4.2 .( the last version for note is 4.4.2 )
But they don't list bootloader versions .

JJEgan said:
Looking at sammobile and updato last firmware is .
N8000XXSDQA7 android 4.4.2 .( the last version for note is 4.4.2 )
But they don't list bootloader versions .
Click to expand...
Click to collapse
Hello, i'm not sure what this means. Which version should i use? and how?

That one flashed through Odin and hopefully its a later bootloader

JJEgan said:
That one flashed through Odin and hopefully its a later bootloader
Click to expand...
Click to collapse
Hello,
i tried to flash N8000XXSDQA7, but it also failed. Similar to all the others that i've tried to flash. I must be doing something fundamentally wrong, as the fail happeds after only about 3 seconds.
Any help you can offer? Really appreciate it.
thanks

I think that the bootloader section of your Note is damaged.The picture you posted shows right method of Odin flash

JJEgan said:
I think that the bootloader section of your Note is damaged.The picture you posted shows right method of Odin flash
Click to expand...
Click to collapse
Ok, but what do i do if the bootloader is damaged? Can i fix it or flash it with another bootloader?
thanks.

Yes if you can get another bootloader .
Further steps are beyond my knowledge but have a look here .
https://www.google.co.uk/search?q=x...x-b&gfe_rd=cr&dcr=0&ei=he5VWrvpOOqstgeTsYaICA

Where To Get Stock Software

I've been running the Oreo beta on my Canadian GS8+ (SM-G955W) but I'd like to go back to stock now. I found the ODIN file on Sam Mobile but it's gonna take a long time to download from there. Where can I download the latest software that won't take so long to download?

acheney1990 said:
I've been running the Oreo beta on my Canadian GS8+ (SM-G955W) but I'd like to go back to stock now. I found the ODIN file on Sam Mobile but it's gonna take a long time to download from there. Where can I download the latest software that won't take so long to download?
Click to expand...
Click to collapse
Hi there!
Sammobile was painfully slow for me too and the only was to speed the download up was to upgrade and pay for their 'membership' type thing. I found this other site where you can download factory images. Go to updato.com and type in your phone model. From there you can download the files for odin.
To speed downloads up even more I use Internet Download Manager.

You could try updato. Though, I am sure it's just as slow. I have something on my ASUS router called Download Master which allows me to download things like this unattended.

Help with putting new firmware on S7

Hey guys i am very new to this and have done a lot of research and i'm in need of some help, I tried to put new firmware onto my Samsung S7 but it failed, long story short i can't get it to boot up normally now. I can put it into download mode and then the recovery mode.
In Download mode it says this
Product Name: SM-G930F
Current Binary: Samsung Official
System Status: Custom
FRP Lock: On
Secure Download: Enabled
Warranty Void: 0
In Recovery Mode it says
samsung/heroltexx/herolte
7.0/NRD90M/G930FXXU1DQJ1
No Support SINGLE - SKU
Supported API: 3
dm-Verity error ...
E: Failed to mount /system (Invalid Argument)
I have done this in the past and haven't had any issues with it, but no matter what i do i cant get it to boot up. I've tried the kies and smart switch to put the normal firmware back on but it says this device isn't supported and so it wont load it on. I have tried multiple firmwares from sammobile using AP,BL,CP and i did put in the CSC one also at some stage.
I hope this is enough information if i have missed anything please let me know, hopefully someone has some answers or suggestions. Thanks guys

Make sure you are using ODIN 3.12.3 or newer, older versions don't work properly

First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.

*Detection* said:
Make sure you are using ODIN 3.12.3 or newer, older versions don't work properly
Click to expand...
Click to collapse
Yeah i was using an older version but i downloaded the latest one and still no luck

Cholek3 said:
First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.
Click to expand...
Click to collapse
Have not tried this, will give it a shot and get back to you!

Cholek3 said:
First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.
Click to expand...
Click to collapse
No Luck, i tried what you said and this is what happens
https://imgur.com/a/QQGAn
Re-Partition was automatically ticked, should i try it again and have it un-ticked? or have i totally buggered it?

Try different cable and/or USB port and/or even computer.
Your phone is ok-ish. You only have to manage to flash software and should be up and running.

Cholek3 said:
Try different cable and/or USB port and/or even computer.
Your phone is ok-ish. You only have to manage to flash software and should be up and running.
Click to expand...
Click to collapse
Well im glad its alright haha, ill keep trying different things as you suggested! Hopefully i have some luck. Thank you

Okay bit of an update on what i have attempted - Still no luck at all,
Tried different Odin verisons
Tried multiple firmwares all downloaded from SamMobile & Correct country/carrier etc
The BL,CP and CSC all seem to work fine when i do them by themselves or seperately but i can never get AP to work, it always fails at Sys.img and doesn't go any further.. it always fails about 1/4 of the way through
Tried the PIT partition with and without re-partition clicked
Tried different cables and Ports
anyone have anymore suggestions or is it dead

Did you try using Smart Switch on pc and recover software that way?

Cholek3 said:
Did you try using Smart Switch on pc and recover software that way?
Click to expand...
Click to collapse
Yeah, it says device isn't supported.. when i click on emergency software recovery nothing shows up..

I have run out of options. Sorry.

Cholek3 said:
I have run out of options. Sorry.
Click to expand...
Click to collapse
No worries, ill keep trying and report back if i have any success

will91491 said:
Yeah i was using an older version but i downloaded the latest one and still no luck
Click to expand...
Click to collapse
Phone must be in Download Mode for ODIN
Make sure you have downloaded the correct firmware

It could be the internal memory fault. That's why it stops at 1/4 each time.

*Detection* said:
Phone must be in Download Mode for ODIN
Make sure you have downloaded the correct firmware
Click to expand...
Click to collapse
Yeah i know this much, have done it also

Cholek3 said:
It could be the internal memory fault. That's why it stops at 1/4 each time.
Click to expand...
Click to collapse
Might give it a shot at replacing it, its ****ed either way as far as i can see. I've worked on a lot of iPhone diodes/chips so hopefully i can do this one. Will report back in a few weeks

Tried a different PC?

*Detection* said:
Tried a different PC?
Click to expand...
Click to collapse
Thats what I suggested earlier on, but there seems to be loads of other threads recently, where people's phones fails at loading "system" in odin.

Looking for sm-g955w binary 7 combination rom

as the title suggests, I'm trying to find binary 7(u7) combination rom for samsung galaxy s8+(sm-g955w):good:

No free download at this moment.
Needs some kindness man who have Premium account to download for us
https://easy-firmware.com/index.php?a=downloads&b=tags&tag=G955USQU7ASK1
OR
https://firmwarex.net/samsung-s8-sm-g955u-combination-file-factory_sw-2/

sm-g955w binary 7 combination firmware
ahh yes, that's the website I seen the u7 binary on. I was trying to find it again. But yes if someone who has a premium account on easy firmware to help get the file.:angel:

http://www.gsm2file.com/index.php?f...3_REV00_user_mid_noship_MULTI_CERT.tar.md5.7z
this one may be the cheapest.But we don't have PayPal in my country

I found another website that has the file, https://www.fullstockfirmwaredownload.com/sm-g955w/
only 2 dollars USD but I do not have a credit card...

It's not COMBINATION file ,it is only full stock firmware

oh yeah, woooopsie

Ok, I paid for the file and it's downloading right now. I'll upload it for you in a bit when it finishes downloading ok.

Thank you. It's very kind of you

http://nitroflare.com/view/FE27819B...3_REV00_user_mid_noship_MULTI_CERT.tar.md5.7z

Excuse me,DO you have Google drive download link?The download speed is too slow in China . Thank you very much

FalsAlarm said:
http://nitroflare.com/view/FE27819B...3_REV00_user_mid_noship_MULTI_CERT.tar.md5.7z[/QUOTE
At last I downloaded successfully. Thank you again
Click to expand...
Click to collapse

what do I do after flashing combination firmware in order to remove FRP lock?

Have you flashed the combination ?if yes just go into setting and find factory reset,reset the phone, then flash full stock firmware. The fpr lock will gone
If you haven't flashed the combination, you'd better unzip it and remove the tz.mbn file,and then package it using 7z file .After doing this you can flash it . The tz.mbn file have much chance will make your phone softbrick.It very important

yes, factory reset worked, thanks

Does this help https://forum.xda-developers.com/s1...a-samsung-firmware-downloader-t3910594/page22