Database Info

How can I change product name on odin mode ?

Hi, I'm using gt-p6201.
Maybe it will be some strange.
Anyway, I flashed 6200 rom for my 6201.
It works great.
But!! It changed my bootscreen(original bootscreen was
galaxy tab plus 7.0 N, now just galaxy tab plus 7.0)
And, prodct name on odin mode changed.(gt-p6201 -> gt-p6200)
Anyone can help me ? I need you help. Please T_T

o16neon said:
Hi, I'm using gt-p6201.
Maybe it will be some strange.
Anyway, I flashed 6200 rom for my 6201.
It works great.
But!! It changed my bootscreen(original bootscreen was
galaxy tab plus 7.0 N, now just galaxy tab plus 7.0)
And, prodct name on odin mode changed.(gt-p6201 -> gt-p6200)
Anyone can help me ? I need you help. Please T_T
Click to expand...
Click to collapse
Um, i believe GT P6200 and P6201 is only differ at design, so i think that's okay and no need to change ?
Sent from my GT-S5830 using Tapatalk 2

unless your sending it for repair/etc. Then its recommended to flash a stock Odin anyways, which should restore your model number.

kevintangi said:
Um, i believe GT P6200 and P6201 is only differ at design, so i think that's okay and no need to change ?
Thank you for reply.
I considered refund this device.
But, bootanimation & product name makes me crazy. T_T
Click to expand...
Click to collapse

chrisrotolo said:
unless your sending it for repair/etc. Then its recommended to flash a stock Odin anyways, which should restore your model number.
Click to expand...
Click to collapse
Thank you.
I considered this one(p6201) refund.
So, I just need it. T_T
I try to flash original firmware(p6201) by odin,
but it is not changed.

Wipe every single partition, then flash the latest stock from fus downloader.
Sent from my GT-P6200 using xda app-developers app

CrisisCorE said:
Wipe every single partition, then flash the latest stock from fus downloader.
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
Thanks.
How can I wipe every single partition ?
It means just factory reset/wipe cache ?
If it is not, please tell me how I can do.
I really need your help

actually I would try Odin'ing to the earliest firmware for your device first, as that will likely contain the bootloaders, then you can Odin or OTA to the latest Firmware for your device.
Im quite certain these are low level images/strings (I had to JTAG repair mine for flashing custom bootloader), which are not easily changeable.
If you had to send it back for a refund, I would suggest trying to find the official firmware, possibly including .pit file.
as a last resort... you could have somebody get their PIT file and manually pull those .img's (dd if= , dd of=, etc.) VERY DANGEROUS!
or just unroot and hope they dont notice!

chrisrotolo said:
actually I would try Odin'ing to the earliest firmware for your device first, as that will likely contain the bootloaders, then you can Odin or OTA to the latest Firmware for your device.
Im quite certain these are low level images/strings (I had to JTAG repair mine for flashing custom bootloader), which are not easily changeable.
If you had to send it back for a refund, I would suggest trying to find the official firmware, possibly including .pit file.
as a last resort... you could have somebody get their PIT file and manually pull those .img's (dd if= , dd of=, etc.) VERY DANGEROUS!
or just unroot and hope they dont notice!
Click to expand...
Click to collapse
Really Thanks !!
But, I didn't back up my own rom files. Oh my god... T_T
So, I searched pit files and csc file for my device, I didn't get it.
But, I found how can back up pit file.
By using 'heimdall suites'
I'll find p6201 users !!
Really Thanks !!

Sorry for my request: I´m using a P6201 and i want to flash the ICS-Update for the P6200.... like you did?!?
this worked without any problems (except the Name Problem)???
Thanks for your help

siqChris said:
Sorry for my request: I´m using a P6201 and i want to flash the ICS-Update for the P6200.... like you did?!?
this worked without any problems (except the Name Problem)???
Thanks for your help
Click to expand...
Click to collapse
No problem. You can do it.
And, Can you extract your pit file from your phone ? (Before flashing)
I need file, but you'll be too.
If your model name change, you can't get customer service.
So, you need back it up.
Please help me T-T.

o16neon said:
No problem. You can do it.
And, Can you extract your pit file from your phone ? (Before flashing)
I need file, but you'll be too.
If your model name change, you can't get customer service.
So, you need back it up.
Please help me T-T.
Click to expand...
Click to collapse
Need also the original pit file for the P6201. Can anyone pls help???

How To Revert Back to Stock Rom (Galaxy Fit)

Hi Friends,
I'm using Galaxy Fit which runs Chocobread V 3.20. I feel Chocobread is litte bit slow. You guys please help me to revert back of stock rom(I'm From India). Kindly explain the way in detail.
Thanks in advance
Regards,
B Balamurali

balamurali said:
Hi Friends,
I'm using Galaxy Fit which runs Chocobread V 3.20. I feel Chocobread is litte bit slow. You guys please help me to revert back of stock rom(I'm From India). Kindly explain the way in detail.
Thanks in advance
Regards,
B Balamurali
Click to expand...
Click to collapse
Install stock ROM with Odin Multi Downloader for Galaxy Fit S5670. Download Beni 1.0.ops.
Download stock ROM for India from here:
http://www.sammobile.com/firmware/
Turn off cell phone. Push the Power, Home and Down button together. When the yellow triangle, connect cell phone and a computer with a USB cable.

so... just flash it,, like flashing a stock rom (that cannot be upgrade via KIES) or like flashing CWM using ODIN? even if i already convert the file system to ext 4. coz for CWM 5 not support RFS system (like creed rom) No bootloop will happend?
-----edit------
just readed here http://forum.xda-developers.com/showthread.php?t=1711857 i'll give it a shot...

zack_rains said:
so... just flash it,, like flashing a stock rom (that cannot be upgrade via KIES) or like flashing CWM using ODIN? even if i already convert the file system to ext 4. coz for CWM 5 not support RFS system (like creed rom) No bootloop will happend?
-----edit------
just readed here http://forum.xda-developers.com/showthread.php?t=1711857 i'll give it a shot...
Click to expand...
Click to collapse
*****
sir, I am not tech savvy. can you explain in details with the files needed?
Thanks,
Balamurali

balamurali said:
*****
sir, I am not tech savvy. can you explain in details with the files needed?
Thanks,
Balamurali
Click to expand...
Click to collapse
first you need beni.ops file.. (just google it and download)
and for the firmware either you require a "one package file"(.tar)
or 4 different files BOOT,PHONE,CSC,PDA. You can get a firmware for fit from sammobile.com
last thing you need is ODIN multidownloader 4.38 for fit or later..
open odin.exe
tick onepackage if you have a single .tar firware file.
if you have four files then you need to carefully place respective file in respective option in "select image to download" section of ODIN. leave EFS empty.
Click on start and wait till your phone boots.

Alright! Im back to stock rom
Sent from my GT-S5670 using xda app-developers app

Stock Firmware For Cyprus
Hello!!
Do you know if there is available firmware for Cyprus???
I was looking to google but i didnt find anything
THANKS (Sorry for my bad english)​

thats work dude thnx

I want to return to stock firmware after i install the "cm-10.2-20131012-EXPERIMENTAL-beni" but i can't find anywhere where i can download the latest 2.3.6 stock firmware has this mobile phone.
How i can find out which stock 2.3.6 firmware has this phone?
I don't know if it helps
s5670xwkt6
has it now.
Please HELP ME.

fits79 said:
I want to return to stock firmware after i install the "cm-10.2-20131012-EXPERIMENTAL-beni" but i can't find anywhere where i can download the latest 2.3.6 stock firmware has this mobile phone.
How i can find out which stock 2.3.6 firmware has this phone?
I don't know if it helps
s5670xwkt6
has it now.
Please HELP ME.
Click to expand...
Click to collapse
All the stock firmwares are available on www.sammobile.com/firmwares/

Harpratap said:
All the stock firmwares are available on www.sammobile.com/firmwares/
Click to expand...
Click to collapse
NO IT ISN'T.
Have you try to download any firmware for that site lately???
ALL THE FILES where uploaded to hotfile.com and now you can't download any of that so....

fits79 said:
NO IT ISN'T.
Have you try to download any firmware for that site lately???
ALL THE FILES where uploaded to hotfile.com and now you can't download any of that so....
Click to expand...
Click to collapse
The youtube link that I posted has mirrors to the same file.
Just google if you can't find. There are plenty of links available! :silly:

Which exactly rom i must download and install so the phone has the factory android 2.3.6?
Is that file correct from my gt-s5670?
I install it as one package file with odin program exist in that package as it show at the video and then i make the two clear choices from recovery menu.
THANKS

Happy Flashing
fits79 said:
Which exactly rom i must download and install so the phone has the factory android 2.3.6?
Is that file correct from my gt-s5670?
I install it as one package file with odin program exist in that package as it show at the video and then i make the two clear choices from recovery menu.
THANKS
Click to expand...
Click to collapse
Hi @fits79
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9...2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion....ting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.
:good::fingers-crossed:

Dead link
Everyone gives the same HotFile dead link.I google it to get some more link options but every single one has finally reached the same dead link.
Come on guys! I need that 1.0 ops file! It's not available on the internet right now.

mericturkbikmaz said:
Everyone gives the same HotFile dead link.I google it to get some more link options but every single one has finally reached the same dead link.
Come on guys! I need that 1.0 ops file! It's not available on the internet right now.
Click to expand...
Click to collapse
Meriç bro now(şimdi) its cloosed from ABD hotfile

Abhishek_DK said:
Hi @fits79
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9...2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion....ting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.
:good::fingers-crossed:
Click to expand...
Click to collapse
Its not GIO_1.0.ops.
Its BENI_v1.0.ops

all files r very important so always save those important file

[Q] Need Stock Firmware/ROM for Glaxy S4 SGH-M919V (Videotron)

Hi I installed SwapSD on my sgh-m919v Galaxy S4 from Videotron but it totally screwed up my phone.. Now I get ''mtp has stopped'' ''settings has stopped'' and ''android.process.media has stopped'' each time I start the phone. I've been looking for the stock rom for my specific model (SGH-M919V) for hours but can't find it anywhere. I tried using SGH-M919 stock rom but it won't work even if I strictly follow the guide, ODIN tells me FAIL!! (Auth).. Could someone upload the stock rom for that specific model somewhere and give me the link please ?
I attached a screen capture from odin to show you what problem i get
Thank you

Check in sammobile dot com, its not your carriers rom, but at least theres one available for the same model from T-mobile.
That should help you at least recover it to a usable state.

Joulez said:
Check in sammobile dot com, its not your carriers rom, but at least theres one available for the same model from T-mobile.
That should help you at least recover it to a usable state.
Click to expand...
Click to collapse
yes that's what I tried to do but it did'nt work ! Check the thumbnail attached to my first post, it says FAIL (auth) in odin and sbl2 error on my s4

elektronick2010 said:
yes that's what I tried to do but it did'nt work ! Check the thumbnail attached to my first post, it says FAIL (auth) in odin and sbl2 error on my s4
Click to expand...
Click to collapse
Two options come to mind
1. If you have a custom recovery and you made a back up you could try to do a restore from there.
2. if you are able to use kies.
you could try to download your carrier firmare like its described on this post
forum.xda-developers.com /showthread.php?t=2261573
Instead of trying to time it i just made the files write protected and then kies couldnt delete them. it will finish downloading around 60-70% (or it did for me).

//SM-G935P\\ **Stock Odin Firmware G935PSPT4BQC1**

This updated firmware from Nougat 7.0 ... you can update or just simply return back to stock .. flash using Odin
AP_G935PVPS4BQC1_CL10318620_QB12903226_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G935PVPS4BQC1_CL10318620_QB12903226_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G935PVPS4BQC1_CL10318620_QB12903226_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_SPT_G935PSPT4BQC1_CL10318620_QB12903226_REV02_user_low_ship_MULTI_CERT.tar.md5
HERO2QLTE_USA_SPR.pit
https://www.androidfilehost.com/?fid=529152257862716536

JUSMEJOSE said:
This updated firmware from Nougat 7.0 ... you can update or just simply return back to stock .. flash using Odin
AP_G935PVPS4BQC1_REPAIR_user_low_ship_MULTI_CERT_meta.tar
BL_G935PVPS4BQC1_REPAIR_user_low_ship_MULTI_CERT.tar
CP_G935PVPS4BQC1_REPAIR_user_low_ship_MULTI_CERT.tar
CSC_SPT_G935PSPT4BQC1_REPAIR_user_low_ship_MULTI_CERT.tar
HERO2QLTE_USA_SPR.pit
Click to expand...
Click to collapse
Does anyone have a download link, this one is not coming up on the Samfirm tool

qwandury said:
Does anyone have a download link, this one is not coming up on the Samfirm tool
Click to expand...
Click to collapse
Its uploaded!

I keep getting a 200/400 error with the Samtool. I can just go the QAA route and update ota and then hack the hell out it.

Perfectly done
Thank you so much, you help me a lot after suffering 2 days.. but i still have open padlock with word custom in my boot screen.. how to remove it? thank you

If Im on U Firmware can I use this to put my phone back to stock P Firmware for warranty repair?

Any link to Dropbox or Google drive...simply unable to download..please...

Ll0oo) lllollk
Sent from my SM-G935P using Tapatalk

Shared pit file
qwandury said:
Does anyone have a download link, this one is not coming up on the Samfirm tool
Click to expand...
Click to collapse
Can someone please share the pit file, so I can get the phone partitioned properly.

Help: tried to flash recovery N8000, failed

Hello, here a plea for help.
I tried to flash my stock N8000 via this post: https://forum.xda-developers.com/showthread.php?t=1957002
I did try this several times, but it never completed: see the attached screen shot of what happens.
Now the device no longer boots normally. It begins to boot, then hangs on the Samsung logo.
Can someone help me here, as the original post seems dead....
thanks.

Start by flashing stock rom through Odin .

JJEgan said:
Start by flashing stock rom through Odin .
Click to expand...
Click to collapse
Hello, and thanks for responding. Could you give me a hint/howto on where the standard ROM might be, and how to flash, or where to read up on that?
Sorry, a bit of a noob on this...
thanks.

Firmware Updato.com or sammobile.com
howto use odin
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin

JJEgan said:
Firmware Updato.com or sammobile.com
howto use odin
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Click to expand...
Click to collapse
Thanks. Am driving right now. I'll try this later this evening.
Sent from my SM-N920C using Tapatalk

JJEgan said:
Firmware Updato.com or sammobile.com
Hello, as the device no longer boots its difficult to tell exactly which device it is, as there are at least 4 devices that seem to fit my device description. I've got the N8000, from GErmany, i received it as part of a package from E-plus. From that information there are 4 device ROM's available....one as late as 2015. Which should i take?
thanks again.
Click to expand...
Click to collapse

Hello,
I do need some help now. I believe i've followed all directions, but am not having success.
Again, my device is a Samsung N8000 Note 10.1. Purchased from Eplus Germany
I have read the directions in how to use Odin, and have followed them precisely.
Drivers installed.
Original Firmware downloaded (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar). But, in the compresesed file that I downloaded there was also another file (SS_DL.dll). Anyone know what this means?
I copied both files into the directory of Odin v3.12.13.
began Odin, then put the tablet into download mode, then connected it to my computer. There was a sound from my computer recognizing the tablet.
I then added the file firmware file (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar) into Odin under the AP tab. I checked that the re-partiton box was not checked, then klicked onto Start. But Odin failed after about 3 seconds.
Can anyone please help me here?
thanks.

Use tar file only .
<I copied both files into the directory of Odin v3.12.13.>Never heard of that before .
At a guess Odin cannot find the file or its not connected ID Box in odin shows as connected

Hello out there community...no one out there that can help me here? Please? ....
tjohnso1 said:
Hello,
I do need some help now. I believe i've followed all directions, but am not having success.
Again, my device is a Samsung N8000 Note 10.1. Purchased from Eplus Germany
I have read the directions in how to use Odin, and have followed them precisely.
Drivers installed.
Original Firmware downloaded (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar). But, in the compresesed file that I downloaded there was also another file (SS_DL.dll). Anyone know what this means?
I copied both files into the directory of Odin v3.12.13.
began Odin, then put the tablet into download mode, then connected it to my computer. There was a sound from my computer recognizing the tablet.
I then added the file firmware file (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar) into Odin under the AP tab. I checked that the re-partiton box was not checked, then klicked onto Start. But Odin failed after about 3 seconds.
Can anyone please help me here?
thanks.
Click to expand...
Click to collapse

JJEgan said:
Use tar file only .
<I copied both files into the directory of Odin v3.12.13.>Never heard of that before .
At a guess Odin cannot find the file or its not connected ID Box in odin shows as connected
Click to expand...
Click to collapse
Thanks for this. I will try this when i'm home this evening...hope it works. Thanks!

tjohnso1 said:
Thanks for this. I will try this when i'm home this evening...hope it works. Thanks!
Click to expand...
Click to collapse
Hello, sorry but i need some more help here please.
I've downloaded what i believe is the stock firmware for my device from updato.com: GT-N8000_EPL_1_20150303173500_n47626s3xd
This is a zipped package with two file in it:
N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar.md5
and
SS_DL.dll
I've put both of these files into the directory where ODIN is. I have downloaded and tried serveral ODIN versions: v1.85, v3.10.6, v3.12.7, v3.12.3, v3.07
None of them work. After loading the tar file, ODIN begins, then after about 3 seconds stops and show the message "fail".
Attached is a screen shot of ODIN once i've loaded the tar file, and one that shows after the fail.
I've also added a picture of my note 10.1 N8000 while in download mode.
Anyone can help me here?
thanks.

Download file .
Unzip file .
Put file on desktop .
Open Odin
Locate tar file only and add to PDA or AP
firmware that you are trying to install is a downgrade and the secure bootloader (sboot) is blocking it.

JJEgan said:
Download file .
Unzip file .
Put file on desktop .
Open Odin
Locate tar file only and add to PDA or AP
firmware that you are trying to install is a downgrade and the secure bootloader (sboot) is blocking it.
Click to expand...
Click to collapse
Hello, and thanks.
What you have described above is exactly what i am doing. Are you saying that the reason it does not work is because the bootloader is blocking it? If so, how do i get around this?
I would really like to "upgrade", rather than downgrade. But at the moment i cannot find any other firmwares for my device. A few years ago I saw several ones, but not anymore.
Do you have a suggestion of which firmware I should install, and where i can get this?
Again, thanks so much for your help! I really appreciate it.

Looking at sammobile and updato last firmware is .
N8000XXSDQA7 android 4.4.2 .( the last version for note is 4.4.2 )
But they don't list bootloader versions .

JJEgan said:
Looking at sammobile and updato last firmware is .
N8000XXSDQA7 android 4.4.2 .( the last version for note is 4.4.2 )
But they don't list bootloader versions .
Click to expand...
Click to collapse
Hello, i'm not sure what this means. Which version should i use? and how?

That one flashed through Odin and hopefully its a later bootloader

JJEgan said:
That one flashed through Odin and hopefully its a later bootloader
Click to expand...
Click to collapse
Hello,
i tried to flash N8000XXSDQA7, but it also failed. Similar to all the others that i've tried to flash. I must be doing something fundamentally wrong, as the fail happeds after only about 3 seconds.
Any help you can offer? Really appreciate it.
thanks

I think that the bootloader section of your Note is damaged.The picture you posted shows right method of Odin flash

JJEgan said:
I think that the bootloader section of your Note is damaged.The picture you posted shows right method of Odin flash
Click to expand...
Click to collapse
Ok, but what do i do if the bootloader is damaged? Can i fix it or flash it with another bootloader?
thanks.

Yes if you can get another bootloader .
Further steps are beyond my knowledge but have a look here .
https://www.google.co.uk/search?q=x...x-b&gfe_rd=cr&dcr=0&ei=he5VWrvpOOqstgeTsYaICA