Hi, I'm using gt-p6201.
Maybe it will be some strange.
Anyway, I flashed 6200 rom for my 6201.
It works great.
But!! It changed my bootscreen(original bootscreen was
galaxy tab plus 7.0 N, now just galaxy tab plus 7.0)
And, prodct name on odin mode changed.(gt-p6201 -> gt-p6200)
Anyone can help me ? I need you help. Please T_T
o16neon said:
Hi, I'm using gt-p6201.
Maybe it will be some strange.
Anyway, I flashed 6200 rom for my 6201.
It works great.
But!! It changed my bootscreen(original bootscreen was
galaxy tab plus 7.0 N, now just galaxy tab plus 7.0)
And, prodct name on odin mode changed.(gt-p6201 -> gt-p6200)
Anyone can help me ? I need you help. Please T_T
Click to expand...
Click to collapse
Um, i believe GT P6200 and P6201 is only differ at design, so i think that's okay and no need to change ?
Sent from my GT-S5830 using Tapatalk 2
unless your sending it for repair/etc. Then its recommended to flash a stock Odin anyways, which should restore your model number.
kevintangi said:
Um, i believe GT P6200 and P6201 is only differ at design, so i think that's okay and no need to change ?
Thank you for reply.
I considered refund this device.
But, bootanimation & product name makes me crazy. T_T
Click to expand...
Click to collapse
chrisrotolo said:
unless your sending it for repair/etc. Then its recommended to flash a stock Odin anyways, which should restore your model number.
Click to expand...
Click to collapse
Thank you.
I considered this one(p6201) refund.
So, I just need it. T_T
I try to flash original firmware(p6201) by odin,
but it is not changed.
Wipe every single partition, then flash the latest stock from fus downloader.
Sent from my GT-P6200 using xda app-developers app
CrisisCorE said:
Wipe every single partition, then flash the latest stock from fus downloader.
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
Thanks.
How can I wipe every single partition ?
It means just factory reset/wipe cache ?
If it is not, please tell me how I can do.
I really need your help
actually I would try Odin'ing to the earliest firmware for your device first, as that will likely contain the bootloaders, then you can Odin or OTA to the latest Firmware for your device.
Im quite certain these are low level images/strings (I had to JTAG repair mine for flashing custom bootloader), which are not easily changeable.
If you had to send it back for a refund, I would suggest trying to find the official firmware, possibly including .pit file.
as a last resort... you could have somebody get their PIT file and manually pull those .img's (dd if= , dd of=, etc.) VERY DANGEROUS!
or just unroot and hope they dont notice!
chrisrotolo said:
actually I would try Odin'ing to the earliest firmware for your device first, as that will likely contain the bootloaders, then you can Odin or OTA to the latest Firmware for your device.
Im quite certain these are low level images/strings (I had to JTAG repair mine for flashing custom bootloader), which are not easily changeable.
If you had to send it back for a refund, I would suggest trying to find the official firmware, possibly including .pit file.
as a last resort... you could have somebody get their PIT file and manually pull those .img's (dd if= , dd of=, etc.) VERY DANGEROUS!
or just unroot and hope they dont notice!
Click to expand...
Click to collapse
Really Thanks !!
But, I didn't back up my own rom files. Oh my god... T_T
So, I searched pit files and csc file for my device, I didn't get it.
But, I found how can back up pit file.
By using 'heimdall suites'
I'll find p6201 users !!
Really Thanks !!
Sorry for my request: I´m using a P6201 and i want to flash the ICS-Update for the P6200.... like you did?!?
this worked without any problems (except the Name Problem)???
Thanks for your help
siqChris said:
Sorry for my request: I´m using a P6201 and i want to flash the ICS-Update for the P6200.... like you did?!?
this worked without any problems (except the Name Problem)???
Thanks for your help
Click to expand...
Click to collapse
No problem. You can do it.
And, Can you extract your pit file from your phone ? (Before flashing)
I need file, but you'll be too.
If your model name change, you can't get customer service.
So, you need back it up.
Please help me T-T.
o16neon said:
No problem. You can do it.
And, Can you extract your pit file from your phone ? (Before flashing)
I need file, but you'll be too.
If your model name change, you can't get customer service.
So, you need back it up.
Please help me T-T.
Click to expand...
Click to collapse
Need also the original pit file for the P6201. Can anyone pls help???
Related
Hey everyone,
I need someone to pull up and post a .pit file for the Samsung Galaxy Note 10.1 GT-N8013 because I can't use OTG host, and the unit no longer charges on USB. This happened after the incorrect ROM was loaded on the device, which I thought was the correct ROM oops.
Thanks for any help
Might be found on sammobile.com .
jje
JJEgan said:
Might be found on sammobile.com .
jje
Click to expand...
Click to collapse
Hey,
I looked there and didn't find it. Also, maybe I don't need a pit file. The main issue is at when my system is restored USB does not work and the system will not charge through USB. This happened using teamwin recovery and installing the incorrect rom, AOKP P4wifi instead of P4notewifi as I had forgotten the correct name for the device. The next step is that I had to do a mke2fs on /efs to make /efs mount which is why I thought I needed a pit file to repartition the entire device and restore the software.
Any help at all to make the device work properly again would rock. I'll post a solution here and to my company knowledge base once a fix is found.
Thanks everyone
Hello,
I guess I need the 4.0.4 stock rom or something from samsung that I can write to the device that will blow away all customizations and return it to as if I pulled it out of the box originally. Something is REALLY FRELLED UP.
HELP ME I'M A MORN!!!! apparently...
pit file download
Droiddevelopers a com site has the pit file. Hope this helps
marcusah123 said:
Hello,
I guess I need the 4.0.4 stock rom or something from samsung that I can write to the device that will blow away all customizations and return it to as if I pulled it out of the box originally. Something is REALLY FRELLED UP.
HELP ME I'M A MORN!!!! apparently...
Click to expand...
Click to collapse
You can find the latest stock 4.0.4 here, you must register to download.
http://www.sammobile.com/firmware/?page=3&model=GT-N8013&pcode=0&os=1&type=3#firmware
stevessvt said:
You can find the latest stock 4.0.4 here, you must register to download.
http://www.sammobile.com/firmware/?page=3&model=GT-N8013&pcode=0&os=1&type=3#firmware
Click to expand...
Click to collapse
I dont find any downloads on that site for the usa n8013 ueclk8 wifi only. There is only a download for cellular south products and thats a cell phone company in my area.
Ive used it on my 10.1, no problems.
Hey
I didn't find a pit file on that website for my device no links.
Ideas?
Hack pit file..
marcusah123 said:
Hey
I didn't find a pit file on that website for my device no links.
Ideas?
Click to expand...
Click to collapse
I have the same problem.. Can we use the pit file of gt-8010?? WHo can hack it?
conan1600 said:
I dont find any downloads on that site for the usa n8013 ueclk8 wifi only. There is only a download for cellular south products and thats a cell phone company in my area.
Click to expand...
Click to collapse
The Cellular South file IS the 8013. I have no idea why it is labeled as that, but I have used both 4.0.4 & 4.1.2 from Sammobile for my 8013. Trust me, both work.
losguy said:
Droiddevelopers a com site has the pit file. Hope this helps
Click to expand...
Click to collapse
So are you going to provide a link to a file or even a valid website? Otherwise, no, this doesn't help, even a little.
I have a very strange problem I have updated my note gt-n8000 to 4.1.2 via OTA but when I returned to 4.0.4 stock rom downloaded from sammobile using odin my mobile network disconnect when the screen is off and reconnect when the device come back from sleep (screen is on) ,I try to reflash using different firmware but the problem persist the country is XSG (UAE) and problem fixed when returned to 4.1.2 or 4.1.1
any one has solution? please help me
hossam sokkary said:
I have a very strange problem I have updated my note gt-n8000 to 4.1.2 via OTA but when I returned to 4.0.4 stock rom downloaded from sammobile using odin my mobile network disconnect when the screen is off and reconnect when the device come back from sleep (screen is on) ,I try to reflash using different firmware but the problem persist the country is XSG (UAE) and problem fixed when returned to 4.1.2 or 4.1.1
any one has solution? please help me
Click to expand...
Click to collapse
What ROMs did you used and how used it in Odin? Did you need PIT file for downgrade?
cocoe
hossam sokkary said:
I have a very strange problem I have updated my note gt-n8000 to 4.1.2 via OTA but when I returned to 4.0.4 stock rom downloaded from sammobile using odin my mobile network disconnect when the screen is off and reconnect when the device come back from sleep (screen is on) ,I try to reflash using different firmware but the problem persist the country is XSG (UAE) and problem fixed when returned to 4.1.2 or 4.1.1
any one has solution? please help me
Click to expand...
Click to collapse
Wifi settings can be set to disconnect when screen off.
My Note N8000 has a hardware problem and will prepare to send to tech service through Operator Tech service, still has N8000 in ICS 4.0.4. I would like to downgrade to ICS 4.0.4 from JB 4.1.2 but I am worry about flash using ODIN. I don't know if needed a special ICS pack or ayone would be OK. My worries are about possible repartition back to ICS and PIT needed at same time as separated PDA, CSC and modem files. Does ICS and JB partitions were the same or if different, were to find a specific distributed list of files for ICS installation and then apply a second update for my operator?
If not needed specific PIT/PDA/CSC and Modem files, could I apply a normal pack using ODIN? what for downgrade from JB?
Thanks
wifi
shaun298 said:
Wifi settings can be set to disconnect when screen off.
Click to expand...
Click to collapse
Wifi doesnot disconnect when screen is off only mobile network I didnot find any solution and I want to keep ICS 4.04 can you help me
PIT
cocoe68 said:
My Note N8000 has a hardware problem and will prepare to send to tech service through Operator Tech service, still has N8000 in ICS 4.0.4. I would like to downgrade to ICS 4.0.4 from JB 4.1.2 but I am worry about flash using ODIN. I don't know if needed a special ICS pack or ayone would be OK. My worries are about possible repartition back to ICS and PIT needed at same time as separated PDA, CSC and modem files. Does ICS and JB partitions were the same or if different, were to find a specific distributed list of files for ICS installation and then apply a second update for my operator?
If not needed specific PIT/PDA/CSC and Modem files, could I apply a normal pack using ODIN? what for downgrade from JB?
Thanks
Click to expand...
Click to collapse
I donot find any pit for gt-n8000 until now only pda file odin is safe to use but you should do clearing of cash and reset through recovery mode after flashing with odin because it may stuck to samsung logo
hossam sokkary said:
I donot find any pit for gt-n8000 until now only pda file odin is safe to use but you should do clearing of cash and reset through recovery mode after flashing with odin because it may stuck to samsung logo
Click to expand...
Click to collapse
Thanks for your support and confidence to install it, I finally decided to flash back from JB to ICS using an INU (India N8000DDALH1) version wich include boot.img, cache.img, hidden.img, modem.img, recovery.img and system.img. After installing old ICS from India, I reset user and partition data from recovery and flash my operator ICS 4.0.4 and it woks perfectly, Now it is in ICS 4.0.4 as I need.
hossam sokkary said:
I donot find any pit for gt-n8000 until now only pda file odin is safe to use but you should do clearing of cash and reset through recovery mode after flashing with odin because it may stuck to samsung logo
Click to expand...
Click to collapse
A quick search in the general section found this - http://forum.xda-developers.com/attachment.php?attachmentid=1943965&d=1367957676
You can go to this thread to verify - http://forum.xda-developers.com/showthread.php?t=2268735
Just remember flashing a pit file can potentially hard brick your device if it isn't right...Your choice to flash, not mine...
great thanks
ultramag69 said:
A quick search in the general section found this - http://forum.xda-developers.com/attachment.php?attachmentid=1943965&d=1367957676
You can go to this thread to verify - http://forum.xda-developers.com/showthread.php?t=2268735
Just remember flashing a pit file can potentially hard brick your device if it isn't right...Your choice to flash, not mine...
Click to expand...
Click to collapse
Thank you very much for replying but can you tell me other website in english that have pit and csc and modem because this website is russian and i understand nothing ,great thanks
great thanks
cocoe68 said:
Thanks for your support and confidence to install it, I finally decided to flash back from JB to ICS using an INU (India N8000DDALH1) version wich include boot.img, cache.img, hidden.img, modem.img, recovery.img and system.img. After installing old ICS from India, I reset user and partition data from recovery and flash my operator ICS 4.0.4 and it woks perfectly, Now it is in ICS 4.0.4 as I need.
Click to expand...
Click to collapse
Thank you for replying but i want to ask you about your mobile network status during device sleeping or standby It show no disconnection
hossam sokkary said:
Thank you very much for replying but can you tell me other website in english that have pit and csc and modem because this website is russian and i understand nothing ,great thanks
Click to expand...
Click to collapse
The first link is to the pit file itself, should open up a download screen...
You don't need the csc or modem as the stock rom or .tar file should contain this... Go to Sammobile to find the stock rom for your region (you will need to register)....
thanks
ultramag69 said:
The first link is to the pit file itself, should open up a download screen...
You don't need the csc or modem as the stock rom or .tar file should contain this... Go to Sammobile to find the stock rom for your region (you will need to register)....
Click to expand...
Click to collapse
yes I see thank you but it is risky to do repartition or not because i flash my country ICS 4.0.4 without repartition and the problem of mobile disconection still persist this problem is not present in jelly bean and not present in ics before updating to jelly bean and what is repartition effect ,sorry for many question and thank you in advance
Using a pit file is risky. If the pit file you use is corrupt, not the right one for your device or has any other problems you will brick your device. Most people here will tell you that you're mad to use pit file when flashing. But hey, if you cant get ANYTHING to work, you're one step off returning it to Samsung and you have a null waranty then I say go ahead and try... You can't make it any worse....
If you don't have all the above conditions then to be honest I'd do a butt ton of research before playing around with the pit file.
Just out of interest, what was so terribly bad about Jelly Bean that you wanted to revert to ICS?
I have an N8000 with XSG and JB. I cannot fault it, and I wouldn't want to go back to ICS
answer
Bulbous said:
Just out of interest, what was so terribly bad about Jelly Bean that you wanted to revert to ICS?
I have an N8000 with XSG and JB. I cannot fault it, and I wouldn't want to go back to ICS
Click to expand...
Click to collapse
My favorite browsers doesnot support flash in jelly bean and my essential using of this tablet is internet browsing so I want to downgrade in addition I donot noticed any practical difference in performance between both version thank you for replying
My reason to return back to ICS is battery drain and mobile operator tech. service visit. My Note 10.1 needs to repair a SIM card slot issue under warranty, I need to restore as operator sold it because of warranty purposes. When it return back to me I will maintain last ICS it exist in the market. It seems to be better than JB, I also have a SGS II and battery drain is terrible when using JB, I returned to ICS and it works much better.
cocoe
You do not need to return it to how the operator sold it. If there is a update to the software pushed out by the manufacturer then warranty is still valid...
If the place you bought it off told you that they're blowing smoke up your arse trying to make it hard as possible for you to return under warranty.
If the sales rep insists then speak to their manager. You can't loose warranty by upgrading the software the Manufacturer is endorsing...
As for battery, I don't know what you are running but battery is fine on JB... I tend to find it takes a day or 2 for the rom to stabilise and battery might suffer for that small amount of time but once it does its awesome...
HELP
my device is made in vietienam please help me to return to ICS
i have a new att sgh-i497. I want to make the stock tar.md5 so if I make a mistake i can use odin to restore it. How does a noob do this?
I have no custom recovery. its a total stock device. I am also trying to host it for all the members who have a soft bricked att sgh-i497.
also do i need to factory reset it first?
jmajuri1 said:
i have a new att sgh-i497. I want to make the stock tar.md5 so if I make a mistake i can use odin to restore it. How does a noob do this?
I have no custom recovery. its a total stock device. I am also trying to host it for all the members who have a soft bricked att sgh-i497.
also do i need to factory reset it first?
Click to expand...
Click to collapse
just typed in google - how to make odin flashable dump
bought up a few suggestions you may want to mull over. looks like you might need to be rooted first though.
Looks like a lot to do. But near the bottom of the first post, it a stock recovery incase you mess up
http://forum.xda-developers.com/showthread.php?t=2101044
Oditius said:
Looks like a lot to do. But near the bottom of the first post, it a stock recovery incase you mess up
http://forum.xda-developers.com/showthread.php?t=2101044
Click to expand...
Click to collapse
that is the rom every one says does not work. it shuts off your wifi and lte. i am trying to get my stock firmware off my tab. i want to host for all the poeple who soft bricked their att sgh-i497s. i cant find the stock firmnware any where.
jmajuri1 said:
that is the rom every one says does not work. it shuts off your wifi and lte. i am trying to get my stock firmware off my tab. i want to host for all the poeple who soft bricked their att sgh-i497s. i cant find the stock firmnware any where.
Click to expand...
Click to collapse
you're right, i've (tried) to help people with your tab I497's and can't find the original firmware anywhere. a few people state that the Jamaica firmware works (though i know that's not what you're after) i'm just googling ways to make backups from CWM backups.
jmajuri1 said:
that is the rom every one says does not work. it shuts off your wifi and lte. i am trying to get my stock firmware off my tab. i want to host for all the poeple who soft bricked their att sgh-i497s. i cant find the stock firmnware any where.
Click to expand...
Click to collapse
OUCH... OK...
Well i wish i could just use odin to dump the tab to the tar.md5
I have STOCK firmware in case anyone needs it. I took it from KIES during a "recovery" on my SGH-I497. Full factory stock ATT. Untouched.
I497UCBMF2_1218964_REV00_user_low_ship.tar.md5
TheDogman said:
I have STOCK firmware in case anyone needs it. I took it from KIES during a "recovery" on my SGH-I497. Full factory stock ATT. Untouched.
I497UCBMF2_1218964_REV00_user_low_ship.tar.md5
Click to expand...
Click to collapse
Stock ROM for the SGH-i497 AT&T?
TheDogman said:
I have STOCK firmware in case anyone needs it. I took it from KIES during a "recovery" on my SGH-I497. Full factory stock ATT. Untouched.
I497UCBMF2_1218964_REV00_user_low_ship.tar.md5
Click to expand...
Click to collapse
Do you still have the firmware file mentioned in this post? I could really use it, I am stuck in a boot loop and need to try and flash back to original stock firmware and CAN NOT FIND IT ANY WHERE!!!! Kies does not support this model for some reason either!! Please help!!!
Thanks a lot,
Josh B.
Yes I need too. Can you send me? thanks a lot is my son tablet . [email protected]
maximo211276 said:
Yes I need too. Can you send me? thanks a lot is my son tablet . [email protected]
Click to expand...
Click to collapse
You can download the required files from here:
https://firmware.gem-flash.com/index.php?a=downloads&b=file&id=22125
or:
https://gsm-firmware.com/index.php?a=downloads&b=folder&id=7847
No need to dump your stock ROM.
See this Thread HERE by @berrg:
[HELP] Galaxy Note 3 n9005 with KitKat (4.4) HARD BRICKED - FIXED!
We all must have the debrick.img on our extSdCard by security. If we have a Hard Brick we can make like this example solved whit success.
I Quote Post #7:
This for another device whit success: http://forum.xda-developers.com/showthread.php?t=2600869. Is same here. Thanks @shazzl
And this the most important: http://forum.xda-developers.com/showthread.php?t=2439367. Thanks @KAsp3rd. All credits to this work HERE.
See also this to create the debrick.img: http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45. Thanks @DocHoliday77
T999 is a example. This Mod work whit Pit.file partition mmcblk0. This is same on all Samsung devices afaik. I only change to N9005_Partial_sys...
If You flashed a new Pit file or Updated by OTA (that can bring one), make new debrick.img .
PS: All People, make your debrick.img and have it on extSdCard by security.
My debrick.img N9005 4.4.2 Kitkat: HERE. Look the THANKS buton if download it.
Flash this Mod attached by Recovery. Saved on internal Sdcard. Copy it to extSdCard.
NOTE: It seems that entire "debricking using microSD" works a little different on Qualcomm-based Samsung phones vs Exynos-based phones - so far all in this thread is about Qualcomm-based models. See post #26 to more details.
Thanks @xclub_101 .
ValenteL said:
See this Thread HERE by @berrg:
[HELP] Galaxy Note 3 n9005 with KitKat (4.4) HARD BRICKED - FIXED!
We all must have the debrick.img on our sdcard by security. If we have a Hard Brick we can make like this example solved whit success.
I Quote Post #7:
This for another device whit success: http://forum.xda-developers.com/showthread.php?t=2600869. Is same here. Thanks @shazzl
And this the most important: http://forum.xda-developers.com/showthread.php?t=2439367. Thanks @KAsp3rd
See also this to create the debrick.img: http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45. Thanks @DocHoliday77
T999 is a example. This Mod work whit Pit.file partition mmcblk0. This is same on all Samsung devices I think. I only change to N9005_Partial_sys...
PS: All People, make your debrick.img and have it on sdcard by security. Flash this by Recovery.
Click to expand...
Click to collapse
Please note that this is for hard bricked Galaxy Note 3 n9005 with KitKat (4.4)! If you get an unbrick image from 4.3 it wouldn't work!
berrg said:
Please note that this is for hard bricked Galaxy Note 3 n9005 with KitKat (4.4)! If you get an unbrick image from 4.3 it wouldn't work!
Click to expand...
Click to collapse
Thanks
I looked inside the updater_script from .zip file and it work only whit Pit file partition mmcblk0. Then if we not flashed a pit file from 4.3 to 4.4 the debrik.img must be the same because the pit file is the same. In this case I think it work.
Anyway, by security is easy make one to 4.3 and another to 4.4.
ValenteL said:
Thanks
I looked inside the updater_script from .zip file and it work only whit Pit file partition mmcblk0. Then if we not flashed a pit file from 4.3 to 4.4 the debrik.img must be the same because the pit file is the same. In this case I think it work.
Anyway, by security is easy make one to 4.3 and another to 4.4.
Click to expand...
Click to collapse
Could you send me your skype on pm. I would like to ask you sth.
Thanks.
berrg said:
Could you send me your skype on pm. I would like to ask you sth.
Thanks.
Click to expand...
Click to collapse
Sorry, I havn't skype and not the pm active. And I don't speak English!!!
@ValenteL
Everybody knows about this but I don't think many people thought to keep a backup. Everybody would worry of this if and when they got hard bricked. Well, when I say 'everybody', I mean me. So thanks.
FeralFire said:
@ValenteL
Everybody knows about this but I don't think many people thought to keep a backup. Everybody would worry of this if and when they got hard bricked. Well, when I say 'everybody', I mean me. So thanks.
Click to expand...
Click to collapse
I agree. We must remember the people whit this reminder. I'm happy to have helped two members saved Your devices, sending to them the debrick.img.
One Mega 6.3" I9205 and now the Note 3 N9005. And I have already my debrick.img on all my devices.
thanks
ValenteL said:
I agree. We must remember the people whit this reminder. I'm happy to have helped two members saved Your devices, sending to them the debrick.img.
One Mega 6.3" I9205 and now the Note 3 N9005. And I have already my debrick.img on all my devices.
Click to expand...
Click to collapse
Do you know if this will work if we have a rom installed and are not on stock firmware?
Sent from Note 3 on Rogers
polish_pat said:
Do you know if this will work if we have a rom installed and are not on stock firmware?
Click to expand...
Click to collapse
Look, the debrick.img is made from partition mmcblk0 (PIT) like we can see on updater_script from META-inf of .zip that create it.
One Costumer Rom not touch on Pit file and the Stock Rom, if not have a Pit to flash, is the same. The PIT continue there untouchable.
Then, in my opinion we can make a debrick.img also in this case.
Don't wish to criticise as this has helped some owners, however if you can recover phone function then by definition it wasn't hard bricked.
Widely accepted definition soft bricked is fixable by flashing from pc,
Hard brick is a paper weight unless you've access to jtag kit
Sent from my SM-N9005 using xda app-developers app
Can i use it to create debrick.img on my N900 using @docholliday77 debrick.zip ?
Just flash it in recovery ? Thank You.
paul_59 said:
Don't wish to criticise as this has helped some owners, however if you can recover phone function then by definition it wasn't hard bricked.
Widely accepted definition soft bricked is fixable by flashing from pc,
Hard brick is a paper weight unless you've access to jtag kit
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Soft brick, by definition, is when the phone won't boot up because it doesn't have a valid OS loaded.
Hard brick is when the phone won't even start and show absolutely no response to things like the power button, charging cable, etc.
hgberry said:
Can i use it to create debrick.img on my N900 using @docholliday77 debrick.zip ?
Just flash it in recovery ? Thank You.
Click to expand...
Click to collapse
I think Yes. See the update_script from META-inf from .zip Mod. You see that it work only whit partition mmcblk0, the Pit file:
package_extract_file("dd", "/tmp/dd");
set_perm(0, 0, 0777, "/tmp/dd");
ui_print("Data Dump running...");
run_program("/tmp/dd", "if=/dev/block/mmcblk0", "of=/sdcard/debrick.img", "bs=1M", "count=128");;
delete("/tmp/dd");
ui_print("Partial System Dump to debrick.img Complete!!!");
For all that have this partition.
What if...
I was just wondering... totally off topic but... in these hard brick cases, I understand that the BL (boot loader)/PIT/etc gets somehow corrupted/erased/destroyed... right?
If so, and we do the recovery method by booting with the SD-CARD that has an "old" bootloader (for example someone creates the unbrick image with the oldest bootloader for us), then when trying to flash with odin, it seems (theory here) we should be able to flash older firmwares that have the same BL as the SD-CARDs BL or newer... right?
Then if that is correct, we could come back from 4.4 BL to 4.3 BL ...?
I am asking here because it seems too easy... surely somehow the BL partition should be privilege protected ...?
Hope no one gets mad with my off topic here...just extremely curious
Thank You!
CekMTL said:
I was just wondering... totally off topic but... in these hard brick cases, I understand that the BL (boot loader)/PIT/etc gets somehow corrupted/erased/destroyed... right?
If so, and we do the recovery method by booting with the SD-CARD that has an "old" bootloader (for example someone creates the unbrick image with the oldest bootloader for us), then when trying to flash with odin, it seems (theory here) we should be able to flash older firmwares that have the same BL as the SD-CARDs BL or newer... right?
Then if that is correct, we could come back from 4.4 BL to 4.3 BL ...?
I am asking here because it seems too easy... surely somehow the BL partition should be privilege protected ...?
Hope no one gets mad with my off topic here...just extremely curious
Thank You!
Click to expand...
Click to collapse
Interesting theory.
Now to convince somebody to test it.
FeralFire said:
Interesting theory.
Now to convince somebody to test it.
Click to expand...
Click to collapse
Hahahahahahaha xDDDDDDDDDDDDDDDDD (EXACTLY!)
CekMTL said:
I was just wondering... totally off topic but... in these hard brick cases, I understand that the BL (boot loader)/PIT/etc gets somehow corrupted/erased/destroyed... right?
Hope no one gets mad with my off topic here...just extremely curious
Thank You!
Click to expand...
Click to collapse
Look, this only work if the device is BRICKED whit QHSUSB_DLOAD on screen, I think. We can better ask @shazzl on this Thread how he made for debrick Your Mega 6.3", and read the Threads from @KAsp3rd and @DocHoliday77 on Post #1.
If someone make the same on one Device working it start always by Your boot from Rom installed, not by extSdCard where are the unbrickable partitions (I made a Sdcard and it have 17 partitions, 16 hidden for windows that only see the first from 64 MB). Only if it is nothing to work on Rom all corrupted, it begin by ext Sdcard.
In my opinion, the debrick.img is made from mmcblk0, the Pit file, and have only all partitions to be recreated on device and may be one bootloader. And give us the way to go to Download Mode and flash by Odin one Rom, because inside there are nothing like contents to work.???
Then... just extremely curious This is good, I'm also.
FeralFire said:
Interesting theory.
Now to convince somebody to test it.
Click to expand...
Click to collapse
To test it? How someone can brick his phone to have the QHSUSB_DLOAD, the way to flash by unbrickable sdcard?
Interesting theory.
EDIT: I quote @FeralFire:
I was making a joke.
CekMTL said:
I was just wondering... totally off topic but... in these hard brick cases, I understand that the BL (boot loader)/PIT/etc gets somehow corrupted/erased/destroyed... right?
If so, and we do the recovery method by booting with the SD-CARD that has an "old" bootloader (for example someone creates the unbrick image with the oldest bootloader for us), then when trying to flash with odin, it seems (theory here) we should be able to flash older firmwares that have the same BL as the SD-CARDs BL or newer... right?
Then if that is correct, we could come back from 4.4 BL to 4.3 BL ...?
I am asking here because it seems too easy... surely somehow the BL partition should be privilege protected ...?
Hope no one gets mad with my off topic here...just extremely curious
Thank You!
Click to expand...
Click to collapse
Unfortunately this doesn't work. I'm not sure why it doesn't (most likely efuse or signatures not matching in aboot vs firmware) it was tried in the sgsIII thread linked in the OP.
Sent from my Nexus 5 using Tapatalk
I've recently installed TWRP on my Note 20 Ultra (Exynos) and deeply regret . It's very usefull and all but not enough to lose Knox encryption and other features of this device, soo does someone know how to restore it as default?
Marhein said:
I've recently installed TWRP on my Note 20 Ultra (Exynos) and deeply regret . It's very usefull and all but not enough to lose Knox encryption and other features of this device, soo does someone know how to restore it as default?
Click to expand...
Click to collapse
Afaik you can only get back stock recovery by flashing stock firmware via Odin or Heimdall.
Everything will be wiped doing that.
bmwdroid said:
Afaik you can only get back stock recovery by flashing stock firmware via Odin or Heimdall.
Everything will be wiped doing that.
Click to expand...
Click to collapse
Thanks for replying, but i'm kinda new in this field and I'm not sure how to do this, so if U can could U explain in a more detailed specific way, I would be even more glad, thanks. What can I do I'm a newbie ksksks.
Marhein said:
Thanks for replying, but i'm kinda new in this field and I'm not sure how to do this, so if U can could U explain in a more detailed specific way, I would be even more glad, thanks. What can I do I'm a newbie ksksks.
Click to expand...
Click to collapse
Well, as you've already flashed TWRP you have some experience already.
Use Samfirm_reborn.0.3.6.3 to download multiple! (by checking "binary nature") part stock firmware.
Get device into download mode and flash the files (Ap to AP, bl to BL, aso) in Odin 3.14 and above.
bmwdroid said:
Well, as you've already flashed TWRP you have some experience already.
Use Samfirm_reborn.0.3.6.3 to download multiple! (by checking "binary nature") part stock firmware.
Get device into download mode and flash the files (Ap to AP, bl to BL, aso) in Odin 3.14 and above.
Click to expand...
Click to collapse
Nice. Thanks for the support!
Marhein said:
Nice. Thanks for the support!
Click to expand...
Click to collapse
You're welcome.
Did it work?
Marhein said:
I've recently installed TWRP on my Note 20 Ultra (Exynos) and deeply regret . It's very usefull and all but not enough to lose Knox encryption and other features of this device, soo does someone know how to restore it as default?
Click to expand...
Click to collapse
costum rom with rom original
bmwdroid said:
You're welcome.
Did it work?
Click to expand...
Click to collapse
Yep it did, seriously U seved my life ksksks. I literally had no ideal how to do and that it would be so easy. Thanks!
Marhein said:
Yep it did, seriously U seved my life ksksks. I literally had no ideal how to do and that it would be so easy. Thanks!
Click to expand...
Click to collapse
Good to hear.
You can mark the thread as "solved" so that other users find a solution directly when searching.
bmwdroid said:
Well, as you've already flashed TWRP you have some experience already.
Use Samfirm_reborn.0.3.6.3 to download multiple! (by checking "binary nature") part stock firmware.
Get device into download mode and flash the files (Ap to AP, bl to BL, aso) in Odin 3.14 and above.
Click to expand...
Click to collapse
Hi there again bmwdroid,
So I've succeeded on installing the stock recovery system on my Galaxy Note, but the main reason that i wanted to "restore" it was to recover Samsung Knox encryption and regain access to the Samsung Pay and Pass functionnalities. So do U know if it's possible to solve it without sending to a Samsung authorized support or that's the only way to regain access to those functions? And just one more thing I've downloaded the right files from Samfirm_reborn.0.3.6 as U said it and flashed the right files(AP and BL), but I've asked myself if it's needed to flash the other ones (CP, CSC_OWO and HOME_CSC_OWO) and if it's needed where do I flash the CSC_OWO and the HOME_CSC_OWO since I can't flash two CSC files in the same flashing port.
Once again thank U for the support and I hope U can answer these questions.
Marhein said:
Hi there again bmwdroid,
So I've succeeded on installing the stock recovery system on my Galaxy Note, but the main reason that i wanted to "restore" it was to recover Samsung Knox encryption and regain access to the Samsung Pay and Pass functionnalities. So do U know if it's possible to solve it without sending to a Samsung authorized support or that's the only way to regain access to those functions? And just one more thing I've downloaded the right files from Samfirm_reborn.0.3.6 as U said it and flashed the right files(AP and BL), but I've asked myself if it's needed to flash the other ones (CP, CSC_OWO and HOME_CSC_OWO) and if it's needed where do I flash the CSC_OWO and the HOME_CSC_OWO since I can't flash two CSC files in the same flashing port.
Once again thank U for the support and I hope U can answer these questions.
Click to expand...
Click to collapse
Well I probably can't answer all but will try to.
If Knox has been triggered there is afaik no way to untrigger it again as it's a hardware switch.
You only need one CSC.
Can't remember which of the 2 will let you keep your DATA .
Edit: found it. That was easy.
bmwdroid said:
Well I probably can't answer all but will try to.
If Knox has been triggered there is afaik no way to untrigger it again as it's a hardware switch.
You only need one CSC.
Can't remember which of the 2 will let you keep your DATA .
Edit: found it. That was easy.
Click to expand...
Click to collapse
Okay, thanks again. I'm marking this thread as solved... Even though I didn't exactly finished what I wanted I thank your help and hope this thread can help other users to solve their problems.