Sailfish replacement glass /digitizer - Google Pixel Questions & Answers

So I replaced glass /digitizer in Co workers pixel. I took it apart 3 different times to redo the job, with three different types of tape. Every time within a couple hours one of the corner starts coming up. So I finally called a buddy who owns one of those cell phone repair places, to ask him what the heck. He told me the factory tape is the best stuff you can get and nobody can get it. He said every brand of phone is the same way. What he told me they do, where comes up you take a thin piece of paper and put a thin super glue on it and dab it in there. I was hoping one of you guys would know the best tape to use or maybe there's a special glue I wouldn't think you'd want to use super glue in case you ever got to take it back apart. I think it's crazy you can't get the same tape they used to put them together in the first place.

Related

Eris cracked screen help

so i dropped my phone just the outer glass broke the lcd is find i was wondering where i can get the cheepest replacement for that i realy dont know what the price goes for but id rather not spend 500 on a retail andriod phone. my upgrade is like 3 months
Report it broken, pay $90 for a replacement through Asurion. Cheaper than $500, y'know?
Sent from my FroyoEris
You need to google for a eris digitizer.
LMGTFY
http://www.google.com/search?hl=en&...fai=CMBq5koWzTNrsN46EygTEha3rCQAAAKoEBU_Q0wbi
i think u can get them for like 40+ dollars off ebay
If you don't mind the long shipping times, you can get a digitizer + the entire housing together for around $60 on ebay. Doesn't seem like a bad deal to me.
#EDIT#
Zombie post . . . sorry about that. Need to remember to look at dates before replying.
Palmbxr said:
so i dropped my phone just the outer glass broke the lcd is find i was wondering where i can get the cheepest replacement for that i realy dont know what the price goes for but id rather not spend 500 on a retail andriod phone. my upgrade is like 3 months
Click to expand...
Click to collapse
I just replace mine, and is wasn't too bad. There is videos on YouTube about how to do it. It took me about an hour, and the part costs about 40 bucks. If you need any help with it, feel free to email me [email protected]
Aaron
you can get one @ 49usd
http://www.htcrepairparts.com/touch-screen-digitizer-for-htc-g5-eris-p-2727.html
Palmbxr said:
so i dropped my phone just the outer glass broke the lcd is find i was wondering where i can get the cheepest replacement for that i realy dont know what the price goes for but id rather not spend 500 on a retail andriod phone. my upgrade is like 3 months
Click to expand...
Click to collapse
I'm going through the same thing. Amazon has some digitizers for about $40. I decided to spend the extra $20 and get this instead
http://www.amazon.com/gp/product/B004F5CEDW
It's the whole casing. I didn't want to bother with stripping the digitzer off the frame which is glued on. With replacing the whole body, you just move the mainboard over and plug everything back in. At least this is my hope. I'll post here again when the thing actually arrives. I ordered it two weeks ago and it probably won't be here until mid March.
Good luck with whatever you decided to go with.
UPDATE. hmmm october was the post date. I guess this guy has long taken care of his problem
Are there any particular tools needed? I swear my other half is on a mission to destroy her phone. It'd be good to know how to do some of the possible DIY stuff.
roscuthiii said:
Are there any particular tools needed? I swear my other half is on a mission to destroy her phone. It'd be good to know how to do some of the possible DIY stuff.
Click to expand...
Click to collapse
There's Youtube videos for disassembly. I haven't watched them myself, but I know they exist, so they probably tell you what tools you need there. From what I remember hearing, just some small torx screwdrivers, or maybe some small phillips, too, but don't quote me on those.
Here is a link to the teardown video I followed.
http://www.youtube.com/watch?v=zHwm-32BI0w
The amazon link in my previous post is what I bought. It was the whole body. There are just screen replacements but I didn't want to mess with that because the digitizer is glued to the front piece. I didn't want to risk warping or breaking the front piece and completely screwing myself over. Anyway, what I bought came with the tools you need to perform the teardown and an extra screwdriver that was not needed.
I am glad I did this. However, it came with it's share of issues.
-The very top of my digitizer does not work. As a result, I can't pull down the notification bar. I can get to it through the menu button but it is annoying.
-I had to move the ear speaker and loudspeaker over. They were glued to some foam which was stuck/glued to the chassis. That foam absorbed the vibration. When my phone rings loud it is nasty because the speaker is bouncing around. I tried to cut some foam myself to replace what was stuck in the old case. It helped but it's not perfect.
-There are some rubber buffers? Isolators? Not sure what their called which also needed to be moved over form the old case.
-It took a month to ship to my house. After discovering these issues, I am kind've stuck with them because it would take a month to send the parts back and another month to get a replacement. By then I'll be due for a new phone.
So that's my experience of replacing the whole case.
Let me know if you have anymore questions.
Thanks for sharing your experience!
My pleasure. Glad to help out.
Sent from my Eris using XDA App
To add to this, because I'm sure there are others out there like me who intend to use their Eris until it gets run over, dropped in lava, drawn, quartered, and defecated upon . . .
I ordered the same replacement housing and digitizer as mentioned above, and had 2 small problems:
The housing I got had a nut in it that came loose, so that one of the corners wasn't able to reassemble properly.
There was something different in the new housing that caused the proximity sensor to function incorrectly.
For #1, I just used some super glue to weld the nut into place. This appears to have worked OK, but I fear that the point is weakened now and I will need to be very gentle if I disassemble the phone again.
For #2, The problem was that the housing was allowing bleed through inside the case from the proximity flasher to the light sensor, which caused the sensor to determine that there was something close to it when in fact there wasn't. I placed a small (oh so small) piece of electrical tape into the housing between where the IR flasher and sensor are located, and the problem was resolved.
If presented with the option of purchasing a new digitizer alone, or a new digitizer and housing together, follow groovel76's suggestion; it's well worth the time and money to go with the latter. The hassle of cleaning the old adhesive off of the new housing, and the risks of getting new adhesive in places where you don't want it far outweigh the cost of just getting a housing with adhesive pre-applied. I tried to do just a digitizer first, and ended up with a small amount of super glue (DO NOT RECOMMEND) getting on the new screen and the edge of the housing, as well as a screen that didn't seat properly because I didn't get quite all of the old bits out of the old housing. This resulted in dust getting under the screen and another crack when I attempted to fix what I'd screwed up the first time.
Between the availability of parts and ROMs for this phone, I see it being in my family for a LONG time yet.
Yes! Buy a digitizer online (most come with the tools you need such as the torx screwdrivers, mine did) and search for videos on youtube. That's what I did and it only cost me $37 for the digitizer and about 30 minutes of my time. And it worked perfectly as new when I got it all back together.

Good video for Inspire 4G screen replacement?

Has anyone seen a good take apart/repair guide for the Inspire4G. Just got digitizer replacement and cannot for the life of me figure out how to attach the ribbon cable without totally disassembling the phone. Hoping to avoid this.
If this is the wrong forum, please direct me to a better one rather than flaming me.
Thanks
Fairly certain that ifixit.com has a good teardown.
Sent from my SGH-T959 using XDA App
Thanks for the tip, but I find nothing for the DesireHD/Inspire4G there other than a total disassemble for the HD that I've already seen, but really did not help me. I just need to change to touch screen. I appreciate the try though.
Got it apart. And kinda back together. Apparently it is not a good idea to reuse the double sided tape that holds the LCD to the motherboard and the digitizer to the LCD. At least the phone works. Now, must order some proper adhesive tape and redo the whole thing.... Took me about 6 hours for whole breakdown and rebuild. Doesn't really seem to fit back together all that well though. Maybe I'll videotape my next breakdown.
Couple of questions as my phone is in need of a new digitizer too.
Did you have any other adhesive tapes in the process?
What did you use to cut the tape that held the LCD together after you baked it?
Does the phone mostly feel the same now that you have it back together, or does it feel flimsy now?
I'm disappointed that it's this difficult to replace the digitizer.
Jeffsmashkot said:
Couple of questions as my phone is in need of a new digitizer too.
Did you have any other adhesive tapes in the process?
What did you use to cut the tape that held the LCD together after you baked it?
Does the phone mostly feel the same now that you have it back together, or does it feel flimsy now?
I'm disappointed that it's this difficult to replace the digitizer.
Click to expand...
Click to collapse
Just so you know, I was a TOTAL noob in phone deconstruction. That being said, the old adhesive seemed quite sticky after i took it apart so I just reused it. Mistake number one. Once it was back together, i notice it slowly opening up like an accordion. The tape wasn't holding and the LCD, digitizer assembly started to rise up. I have since ordered some adhesive tape from the place I got the digitizer from. Definitely get the tape.
I did not bake it as in the video (i assume you watched the same one I did). I used an old spark plug gauge tool thingie to just cut through the tape. It was still really sticky so after i struggled to insert the digitizer ribbon cable, I just reused it. Don't do this. Get new tape.
I did have some plain old scotch double sided tape. I used it in one spot. Lesson: Don't use this stuff. Get new tape.
Did I mention that I think you should get new tape? All in all, it was quite laborious. I went really slowly so as not to brick it. When it was done the phone worked, but like I said the LCD raised up after a couple of minutes. The adhesive was not working anymore. At least I have gained confidence for the next take-apart. I can't believe i GOTTA go alll the way back to total break down. Aaaarrrgh.
So something like this should do the trick?
http://www.harborfreight.com/32-piece-sae-metric-feeler-gauge-32214.html
Thanks for the heads up... Where exactly do you recommend putting the tape? Does it just go on the black edges of the digitizer, or does it actually go on the surface of the LCD? Sorry if that's a noob question, but I haven't gotten the glass off and I want to make sure I have enough adhesive tape from the Ebay Vendor. Did you have any issues with reusing the mylar?
Sorry for the 1000 questions, I really don't want to shell out off contract prices for another phone...
Mylars were all reusable if removed carefully. I photographed every step so I would know what to put back where. Still waiting for my tape from Repairs Universe. The biggest two culprits are:
1] Tape holding back of LCD to the silver chassis frame and
2] Tape holding SIM FPC to the main board.
You might also tape the PCB cover to the upper board, mine was loose after rebuild.
That I believe that is it for the major tape requirements. Of course the digitizer needs to be taped to the LCD. I'm curious, though, the tape framing the LCD holding the digitizer seemed to have some thickness to it. Almost like foam rubber, quite thin, but thicker than regular cellophane tape.
Good luck. Let me know if you have any tips after your attempt.
Got the tape. Retried to rebuild with new OEM tape. Same result. The phone when completed expands like an accordion. The digitizer/LCD assembly does not stay stick to whatever is under it. I know when to admit defeat. Looks like I'm shelling out 500 for another phone. At least I have spare parts!
yeah i was going to do my screen myself till i seen the tear down & then called afew places around here that does screen replacements and said NO we won't touch the Inspire, i spent the money and let HTC fix it. was worth it they replaced the whole shell not just the screen ... IE lcd / digitizer / Outer case that was scratched and dented... basically a new phone with the guts out of my phone
I attempted to do this and let me just say that I too now have spare parts. I purchased a phone off of ebay. I didn't realize the no contract price went up to around 500.00 I should have gone directly to HTC. Live and learn...
I will be in possession of an HTC Inspire for testing purposes that also has a cracked screen. Not sure how bad it is but I was planning on just replacing the display for learning purposes. However it seems that it may not be worth the time spent.
If I do decide to give it a go I'll post my results here. First thing is to acquire new tape. Did you all purchase it locally or did you buy the adhesive online?
YouTube has lots of videos. Best to watch a few a see the best way. If you are scared to break it best you send it in for repair instead. Get a digitizer and screen combo.

Separate the screen and frame without breaking the screen

Why would you ever care if you damage the screen while taking it out since you're probably replacing it anyway? I have no clue. But I thought I would give it a try, and now i'm sharing.
So I managed to remove the screen and the frame without breaking anything (granted the screen wasn't working already)
i.imgur.com/cpKVP
What I did was cut off little strips from a credit card or any sort of plastic card. Then heated only the back side of the frame. I figured if I tried heating the screen from the front, the glass and screen adhesive might start separating. Then I worked the strips in between the frame and screen through the holes in the frame.
i.imgur.com/iql8z
You might be wondering why there are places ground down on the frame... I'll get to that...
Just worked at that for probably an hour constantly reheating. Just unsticking the adhesive from the back of the screen and the frame. I finally managed to be able to fit a card in through the bottom.
i.imgur.com/kuDuP
Then I just used that to unstick the rest of the adhesive.
Now, about why a lot of the frame has grinding marks. I have the Verizon GS3, but I broke the old screen. I found a water damaged sprint gs3 on craigslist for $100. so I figured I would see if it would fit, and if it didn't I could sell the screen for maybe 200-250 on ebay. It didn't fit, not perfectly... but I really didn't feel like waiting for it to sell. So instead, I made it fit, I almost got it perfect, and it all worked just perfectly when I had it all together. But I wanted it to fit perfectly, so naturally, on my last attempt, I ground down a little too far and nicked part of one of the ribbon cables. So I figured I'd try taking it apart without breaking it... If anybody has any suggestions on how to fix the ribbon, feel free to say something!
i.imgur.com/MN9Fl
how bad did you butcher the ribbon? you could maybe try circuitwriter conductive pen to draw the contacts back. http://stcwk.blogspot.com/2010/03/how-to-repair-broken-ribbon-cable.html
I got the S3 like 3 days ago, and earlier today it just slide out of my pocket when i was crouched, (I know, i placed an order on a case 2 days ago but thought i would be careful around the house with the phone til than) , Crack lower right corner, do you think you could seperate the glass/digitizer from the lcd screen? to just replace the glass/digitizer http://i46.tinypic.com/5lyx41.jpg
The pen might be worth a try. As for separating the glass from the screen, it's possible, but I really wouldn't recommend it. Just because of how the screen is manufactured, there is a film of glue between the front glass and the screen, it would be impossible to glue it back together without leaving bubbles in between, so it would look way worse than just the little bit of cracked screen you have.

My screen replacement experience

So my S3 had a cracked screen. So I bought a replacement. Removed the old one using instructions on Youtube etc. My replacement screen was like $7 from eBay. It came with all the tools and some new double sided adhesive. I got the screen installed and it worked. Here's the tricky part. It was about half as responsive. I figured it was due to not using the LOCA UV glue that it comes held with from the factory.
So today I removed the replacement screen. Luckily I got it removed without cracking it. I turned it on and started using it without the screen and it seems like it is like stock. No damaged digitizer. Thank goodness. I have ordered some LOCA glue from eBay to redo the repair.
We have several UV boxes\lamps where I work for curing adhesive. So I will do the redo repair there with glue. I assume there was air gaps between the glass and digitizer. The glue should fix that. The best video i saw was using both the double sided adhesive and the LOCA glue. The guy used the tape on top where the ear piece is most importantly the bottom to hold the capacitive buttons down and also make them stick well to the glass.
If you are planning on doing this repair go with the LOCA glue. I saw several UV mini flashlights for very cheap that you could probably buy for $3 or $4 dollars to cure the glue. I wish I had kept the leftover clear double sided tape in hindsight to adhere the capacitive buttons down to get a good connection.
Yeah, I wish I read something like this. I had a nightmare of a time. I replaced just the glass initially, but when I would be pushing for a while, the glass would bend and press onto the screen. That was just the first problem.
Then I went to the developer options and showed touches on the screen. I seemed to have a non responsive screen at time, so I thought I'd see if my touches were registering. Aaand I had a touch that would get stuck on the screen. Cool beans.
Then like an idiot, I thought I'd ghetto rig it. I got some 5 min epoxy and slathered it to the screen and pressed the glass to it. That wasn't a proud moment. It might have worked if there wasn't a million bubbles in the glue.
So then I was like, screw it, I'll order an assembly from eBay.
I got my first assembly, put it all together and the touches weren't very responsive at all! They worked like 50% of the time. Not only that, but I looked closely at the whole assembly and realize that it was a horrible knockoff! The screen was smaller than OEM and the "Pebble Blue" was all kinds of messed up.
So then I ordered a new one that claimed that it was OEM and from Samsung. Cool
. I ordered it, and low and behold, SAME JUNK! I was so mad.
I went fk it. I ordered the screen assembly without the frame, cleaned my old frame off, and got it ready. When it came in, I wanted to cry, it was so beautiful and OEM. I returned all the other craps and got my money back from the one, but the other company that claims that it was OEM decided to send me another one! Even after they said they would give me a refund. I just shipped the second one back yesterday... Man, all said and done, it cost me $150 and a lot of time. Samsung would have done it for $176.95. Lesson learned. :banghead:
Sent from my SCH-I535 using xda app-developers app
I've replaced @ least 5 outside glasses
Sent from my SCH-I535 using Tapatalk

U12+ Display replacement

Hi guys
Sadly I have a cracked display...so there are no spare parts available and the shops in Germany would like to have something around 500€.
I changed in the past some Sony-Displays and thought about doing myself. I found on aliexpress some U12+Displays.
Sadly I didnt found a single "manual" or how to, to do this right - anyone can help?
Best regards
Maybe these vids from JerryRigEverything can help you out.
Good luck!
Sent from my HTC U12+ using XDA Labs
https://tinyurl.com/htcu12
Just replaced mine
majomathes said:
Hi guys
Sadly I have a cracked display...so there are no spare parts available and the shops in Germany would like to have something around 500€.
I changed in the past some Sony-Displays and thought about doing myself. I found on aliexpress some U12+Displays.
Sadly I didnt found a single "manual" or how to, to do this right - anyone can help?
Best regards
Click to expand...
Click to collapse
I just replaced mine yesterday and it was more difficult than any other one I've done in the past. Anyway I never found one single video on YouTube that showed the screen removal and pretty much had to play it by ear. There are a few videos that show the disassembly of the U12+ and each stops before removing the screen. My advice is to remove everything from the frame, I managed to piece together enough from the videos to know there are 15 screws to remove, one video said 14 but there's one more that's hidden until you've gotten under the motherboard holding the front facing cameras. Knowing I wanted to keep it simple I didn't remove all of the antenna wires, there's one at the bottom that's under the speaker cover that I left attached so I only disconnected it from the motherboard. Then the other I only disconnected near the vibrator, leaving it connected at the motherboard, so each piece had one wire that stayed connected. Meanwhile you'll have to undo every other plug on the device and with a little persuasion everything fell out. (Don't attempt to remove the button/pressure sensing strips along the sides!) Once you are down to the frame, and for me the ear piece speaker, I used a heat gun to soften the bond between the glass and the frame. It doesn't loosen up very easily, they are really bonded together. I got most of it and then began to chip away at the broken glass. You'll want a good heat gun for this part. I had to set mine to 300F to really get it to loosen up and then work mm by mm around the edge getting all of the glass and glue out of the track. This probably took me a half hour or more. I used E6000 glue but only because I would have had to order B7000 or any other recommended glue. E6000 is a good glue but just because many of the other videos I watched used B7000 I would have liked to use it too.
To install the new screen I used a syringe filled with my glue to follow the small glue track around the edge of the frame. Don't worry about squeeze out because this glue is very forgiving and wipes away easily with IPA Alcohol and a rag. I followed the old glue placement, adding a little extra near the bottom corners and a dab around the ear piece speaker holes. Then it's just reversing the process to assemble the electronics. Now here is another word of warning, the plugs are so small and some are not easy to align but be sure they snap into place and are flat when installed. I made the mistake of not getting the display plug flat and had to do a partial disassembly to correct the issue.
I didn't glue the back on but think I might today just to try and achieve the waterproof level the phone shipped with. You may have to glue yours but I had previously broken the back and already replaced it and the replacement came with a double sided adhesive strip that was still pretty sticky. If I remember correctly the original back was glued on and probably wouldn't have stuck if I had tried to just replace the back as I did.
One other note. After being disassembled and pulling the battery my finger print scanner didn't want to work. In fact it didn't even show up in the menu when I went looking for it but restarting the phone again caused it to show up. My advantage with the double sided adhesive was I was able to test everything and use the phone for a full day before committing to gluing the back on. Now that I know everything is working, the phone is charging and it all seems good I can glue the back on.
Best of luck

Categories

Resources