Related
This thread is for guides and tips related to Cube U9GT2, Window N90, Visture V2, and Easypad 970.
Questions: For further questions some very nice threads already exist in: XDA (EN), SlateDroid (EN), Chinamobiles (DE), 4PDA (RU), and Moage (CN).
Everyone is welcome to post here their own guides/tips, even when already similar topics exist. Unfortunately often guides and tips vanish in endless thread pages. Here is a suitable place to bundle all these in one place together and link them in needed user posts.
Guides & Tips - How to:
01. Use the storage of my device (#2)
02. Root (#3)
03. Flash a Firmware (#4)
04. Use Moage's ROMs (#5)
05. Make Gameloft Games visible/installable (#6)
06. Use 3G (#32 by Darkjesus)
07. Stabilize my WiFi (#34)
08. Use Ad-hoc WiFi (extLink.01; extLink.02 + special wpa_supplicant)
09. Customize ROMs (extLink.01 + extLink.02)
10. Use a different charger (extLink)
11. Fix the "Google Play Store" (extLink)
12. Use CIFS (extLink)
13. Improve speaker quality + volume (#35)
14. Install GApps correctly (#36)
15. Do Screenshots in ICS without root (#37)
16. Tweak build.prop (extLink)
17. Unpack an IMG
18. Open the Tablet
19. Make Bluetooth working
(01) How to: Use the storage of my device
1. Turn tablet (on), and switch debugging (off)
-> 2.3.1 Settings/Applications/Development -> USB-debugging
-> 4.0.3 Settings/Developer options -> USB-debugging
2. Connect device with PC (Win7) and use tablet's upper microUSB port (not OTG)
3. Windows will now try to install drivers, this will last ~20sec, mostly Win7 will succeed
-> if not then download "RK2918-USB-Drivers" and direct Win7 to those drivers; sometimes it will happen that windows cannot handle Intel drivers -> then choose AMD drivers
-> the result should be, e.g.:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(2) How to: Root
I. Preparation, "ADB Driver" installation:
1. Turn tablet (on), and switch debugging (on)
-> 2.3.1 Settings/Applications/Development -> USB-debugging
-> 4.0.3 Settings/Developer options -> USB-debugging
2. Connect device with PC (Win7) and use tablet's upper microUSB port (not OTG).
3. Windows will now try to install drivers, but Win7 will not succeed - if already drivers are installed (yellow triangle) remove them completely.
4. Open device manager (start/control panel/device manager) and click on your tablet-device name (e.g. Cube) and choose "update driver".
5. Now select: Browse my Computer -> Let me pick -> All Devices -> Have Disk.
6. Download and unzip "ADB-Drivers" then navigate (see step 5.) to "android_winusb.inf"; next: choose "Android ADB Interface". ADB Drivers will now be installed.
II. Root
1. Download suitable root software:
a) 2.3.1: GingerBreak-v1.20.apk, SuperOneClick 1.7,
b) 4.0.3: SuperOneClick 2.3.1.0 (changed CN), SuperOneClick 2.3.3 (Changed by Verdeler).
2. Start GingerBreak.apk on tablet or SuperOneClick.exe on PC (run as administrator).
3. Click "root" within SuperOneClick -> done.
(03) How to: Flash a Firmware
I. Preparation
1. Choose and download an IMG (Firmware):
a) StockROM: Cube U9GT 2, Window N90, Visture V2, Easypad 970.
b) CustomROM: XDA (wackym), SlateDroid (s1eepy), SlateDroid (db260179), Moage (磨叽哥), FlashMyAndroid (prox32).
2. If necessary download "RKBatchTool".
3. Extra Driver shouldn't be needed, Win7 will recognize the device -> therefore don't install manually ADB-, or USB-Driver.
4. Charge Tablet to >70%
II. Flash
1. Turn tablet (off) and disconnect every cable and charger.
2. Start on PC "RKBatchTool.exe" and choose under the item "FW Path" an IMG (see I. Preparation).
3. Now press Volume (-) on tablet -> keep pressing and connect at the same time the tablet (upper microUSB port, not OTG) with PC -> as soon as you hear the PC is successfully connected or you see in RKBatchTool under "Connected Devices" a green light, then you can stop pressing Volume (-) and the tablet should be recognized from "RKBatchTool".
4. Click in RKBatchTool "Restore" (not Upgrade) and the flash process should begin; the first-time boot will last longer than normally - you can close RKBatchTool and disconnect the USB cable as soon as the tablet is booted.
good luck
(04) How to: Use Moage's ROMs
I. Preparation:
1. Download Moage's ROM and unzip: Link
2. Charge Tablet to >70%
3. Switch tablet (off) and disconnect every cable and charger
II. Flash Moage's ROM:
1. Moage's FlashTools:
a) Moage 4.3.5: Open "MoageRomFlash.exe" and choose how much space for applications you would like to have, don't get confused from chinese you will nevertheless see numbers those are important -> click the number you like most, after this the "MoageRKtool.exe" will start automatically
b) Moage x.x.x: when there is no "MoageRomFlash.exe" then start "MoageRKtool.exe" and go on with step 2.
2. Now press Volume (-) on tablet -> keep pressing and connect at the same time the tablet (upper microUSB port, not OTG) with PC -> as soon as you hear the PC is successfully connected or you see in MoageRKtool "Found RKAndroid...", then you can stop pressing Volume (-) and the tablet should be recognized from "RKBatchTool".
3. In "MoageRKtool" select all items except "Backup" and manually link to those files
=> then click at first "EraseIDB" (red circle), after that: click "Run"(blue circle) -> even when it is in chinese the buttons order will be the same.
4. Wait until the device is booted, then remove USB cable and close FlashTools.
Done.
Extra-Feature:
=> If your tablet wont boot anymore, and you don't want to lose your data and settings, then do this to fix the boot problem:
1. Start "MoageRKtool.exe" and select: "Loader", "Parameter", "Boot" and "System"
2. Click "Run" (don't click EraseIDB). Now it will replace just some important system files and the rest will remain.
(05) How to: Make Gameloft Games visible/installable
Two ways:
1. Modify manually "build.prop" /System (source):
=> you need to change 3 things:
ro.product.model=GT-P1000
ro.product.device=GT-P1000
ro.product.manufacturer=samsung
2. Exchange the build.prop:
=> download an already modified "build.prop", e.g. source; then rename in "build.prop" and exchange the original "build.prop" in "/System" at tablet -> before that it would be wise to backup the original file
Hint: after changing or switching build.prop clear data from "Google Service Framework" and "Google Play Storage" then reboot
The result will be:
Extra Information: Optimizing build.prop
superb!!! Million Thanks..
Now i can try on moage rom now..
Waiting for the next tutorials!!!
Superb!
dozz01 said:
I. Preparation
1. Firmware download:
a) StockROM: Cube U9GT 2, Window N90, Visture V2, Easypad 970,
b) CustomROM: XDA (wackym), SlateDroid (s1eepy), SlateDroid (db260179), Moage (磨叽哥).
2. If necessary download "RKBatchTool".
3. Extra Driver shouldn't be needed, Win7 will recognize the device -> therefore don't install manually ADB-, or USB-Driver.
II. Flash
1. Switch tablet (off) and disconnect every cable and charger.
2. Start on PC "RKBatchTool.exe" and choose under the item "FW Path" an IMG (see I. Preparation).
3. Now press Volume (-) on tablet -> keep pressing and connect at the same time the tablet (upper microUSB port, not OTG) with PC -> as soon as you hear the PC is successfully connected or you see in RKBatchTool under "Connected Devices" a green light, then you can stop pressing Volume (-) and the tablet should be recognized from "RKBatchTool".
4. Click in RKBatchTool "Restore" (not Upgrade) and flashing should start; the first-time boot will last longer than normally - you can close RKBatchTool and disconnect the USB cable as soon as the tablet is booted.
good luck
Click to expand...
Click to collapse
What is the reason for using the restore button rather than the upgrade
Button?
I have used the upgrade on two firmwares
Thank you
dmagee said:
What is the reason for using the restore button rather than the upgrade Button?
I have used the upgrade on two firmwares
Click to expand...
Click to collapse
Me too. Used upgrade button in RKBatchTool v1.3 and v1.4 without any problems.
druelf said:
Me too. Used upgrade button in RKBatchTool v1.3 and v1.4 without any problems.
Click to expand...
Click to collapse
Also in the original firmware install guide for the cube it states to use the upgrade button to flash firmware?
Sent from my SK17i using Tapatalk
dmagee said:
What is the reason for using the restore button rather than the upgrade
Button?
I have used the upgrade on two firmwares
Thank you
Click to expand...
Click to collapse
Upgrade only install the firmware, restore delete the last version and install the new.
Restore is a better option.
Thank you for that
Sent from my SK17i using Tapatalk
This thread is super helpful. I have an oem u9gt2 on the way and was looking for a straightforward guide. Kinda curious what rom everyone is running?
From reading around the net it seems wackym's is popular as well as Visture android 2.3 stock rom.
bytemuncher said:
This thread is super helpful. I have an oem u9gt2 on the way and was looking for a straightforward guide. Kinda curious what rom everyone is running?
From reading around the net it seems wackym's is popular as well as Visture android 2.3 stock rom.
Click to expand...
Click to collapse
I have tried the stock v1.5 gingerbread with the Honeycomb ui from the Cube website and found it very fast and stable, also tried the Wackym v1.08 Ics and found that excellent, not quite as nippy but still excellent, I changed the built in Ics launcher for Apex launcher on the market and this improved the speed of the functionality, really well with tons of options!. Unfortunately on the Wackym firmware the flash is flaky with things like iPlayer etc but that is not down to him, as flash on Ics is not officially supported even if on the market the latest version states support for Android 4 devices. I am sure this will be fixed in the coming months though.
Wackym firmware
http://forum.xda-developers.com/showthread.php?t=1420553
Stock firmware Ics and Gingerbread
http://www.51cube.com/tools.asp
Hope this helps
Sent from my SK17i using Tapatalk
dmagee said:
What is the reason for using the restore button rather than the upgrade Button? I have used the upgrade on two firmwares. Thank You
Click to expand...
Click to collapse
The "upgrade" button works just sometimes, e.g. if you upgrade from one Easypad ROM to another. But if you switch to a different ROM, then the "upgrade" button often doesn't work anymore. With "restore" you have a clean flash procedure. It can also be useful, for new devices or after flashing a new ROM, to do a "factory data reset" (in 2.3.1 under settings/private; 4.0.3 settings/Backup&reset). This will sometimes stabilize the firmware and prevent unexpected failures or bugs.
dmagee said:
I have tried the stock v1.5 gingerbread with the Honeycomb ui from the Cube website and found it very fast and stable, also tried the Wackym v1.08 Ics and found that excellent, not quite as nippy but still excellent, I changed the built in Ics launcher for Apex launcher on the market and this improved the speed of the functionality, really well with tons of options!.
Click to expand...
Click to collapse
Hi, thanks for your reply. I am downloading this one "U9GT 2固件V1.05（安卓2.3系统固件）" from cube's website. I assume this is the gingerbread version you were referring to.
The honeycomb ui is included in the rom or is that something you added? Apologies if it's a stupid question as this will be my first android tablet.
Seems a few people are sticking with gingerbread until the bugs are worked out of ICS. I recall reading that someone thought graphics looked clearer or sharper with ICS on the u9gt2...wondering if this was just the user's imagination or if there is some logic behind this.
Yes that 's the Gingerbread version and the honeycomb ui is built in, however I have installed Go Launcher Ex on the Gingerbread Rom makes it really quick. That replaces the honeycomb launcher but you still get all the other honeycomb parts like the bottom taskbar etc. Try it you won't regret it. As for the graphics looking better under Ics maybe the menus look clearer etc due to the new fonts but that is about it. The excellent IPs screen makes is look superb on Gingerbread and Ics.
Sent from my SK17i using Tapatalk
Hi,
Please provide a link to download MoageRKtool.exe.
Thanks
the Moage tools are included in Moages ROMs - maybe they are also to big for uploading here
GooApple V5+ : iPhone 4/4S Replica
Everything you need to know about it !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
____________________
UPDATE : ADDED CMWR 6.0.2.7
____________________
Review Videos
GooApple V5+ Review by AndroidSale
Official GooApple V5+ review
http://v.youku.com/v_show/id_XNDc1MzAwMTIw.html
____________________
Specifications
System
Model: GooApple V5+
Processor: MTK MT6575, 1Ghz - ARMv7
Operating System: Android 2.3.6
Kernel: Linux v2.6.357 ([email protected]) (gcc version 4.4.3 (GCC) )
Ports: 3.5mm Earphone Jack and mini USB
Launcher: iLauncher modified
Partition: MTD
Display
Resolution: 960x640 pixels
Density: 1920x1280
DPI: 320.0
Screen size: 3.5"
Color support: 16 million colors
Functions: Touchscreen, Multi-Touch, Retina
Camera
Front Camera: 1.3 MP
Back Camera: 8 MP
Functions: Flashlight, Zoom, Auto Focus, Scene mode, ISO adjustment, Time Face Detection
Connectivity
Carrier: Unlocked
Network band: GSM 2G: 850/900/1800/1900 MHz and WCDMA 3G: 2100MHz
Data: GPRS, EDGE, HSPA
Message: SMS, MMS, Email
Bluetooth: Bluetooth 2.0
WLan: Wi-Fi IEEE 802.11 b/g/a
USB: USB 2.0
GPS: GPS, built-in GPS chipset (EPO and AGPS)
SIM: Micro SIM card (Single)
Phone Book: More than 10000 contacts
Browser: HTML, Safari
Battery
Type: Built-in Li-on battery ; 1050mAh
Standby Time: 120-150 hours
Talking Time: 3-4 hours
Memory
Built-in Memory : 512 MB
External Memory : 8GB/16GB/32GB (optional : SDcard)
RAM: 512 MB
Phone Model
Replica: 1x1 iPhone 4/4S replica
Dimensions: 115h - 58.6w - 9.3d (mm)
Weight: 135g
Other Features
Button: Mute Button just like iPhone
Video Player: AVI, MP4, 3GP, MOV, MKV, FLV
Audio Player: MP3, FLAC, APE, OGG, AMR, AAC, WAV, AWB
Images: JPG, PNG, BMP, GIF
E-book Format: TXT, CHM, DOC, HTML
Ring Tones: Original iPhone 4 ringtones
Play Store: Google Play Store
Radio: FM Radio
Sensors: Gravity Sensor, Proximity Sensor, Lichtsensor, Accelerator Sensor
Recovery: Stock recovery is E3
Languages
English, French, German, Spanish, Portuguese, Russian, Arabic, Indonesian, Italian, Malaysian, Turkish, Vietnamese, Thai, Chinese
Accesories
1x GooApple V5+ Phone
1x Travel Charger
1x USB Data Cable (I suggest buying a new one)
1x Headphone (if plugged in, both the phone & headphone give sound)
1x Screen Protector (optional)
1x iPhone Skin Case (optional)
- ALL ORIGINAL IPHONE 4/4S CASES, RECHARGERS, HOLDERS, ... ARE COMPATIBLE
____________________
How to Root
This was a hard & long trial to get this phone rooted. Though, it's a very simple way found by me and yuweng, thanks bro!
Based on yuweng's tutorial : MT6577 CWMR Root Updated V2[/b]
Download these and follow the tutorial:
ADB.zip - http://www.mediafire.com/?11cbu388oqu8amw
All the Drivers I could find - http://www.mediafire.com/?wfr5fgkxkdau6w4
CWMR Recovery's.zip - http://www.mediafire.com/?2r30o428558h22q
MTK Rom Studio 1.1.77.146.zip - http://www.mediafire.com/?h22puc8kac6axv7
SP Flash Tool v2.1134.00.zip - http://www.mediafire.com/?ob5caeigzc1ga10
SP Flash Tool v3.1224.0.sn85.zip - http://www.mediafire.com/?5u29nf4fp4omw9n
Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip - http://www.mediafire.com/?fee3e7cta5mg3fp
- Setting up the folders and phone (to make it easy)
1. Create a folder in C:\ called "GooApple"
2. Extract all the ZIP files EXCEPT "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" to "C:\GooApple\" so you have 6 folders in GooApple.
3. And copy "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" to "C:\GooApple\"
4. I prefer doing a factory reset before doing this.
* Factory reset can be found at Settings > General > Privacy > Factory data reset > Reset phone
5.Now enable Unknown sources, USB debugging and Stay Awake.
* Unknown sources can be found at Settings > Store.
* USB debugging and Stay Awake can be found at Settings > Store > Development.
6. Make sure all drivers are installed properly. Some might install when connecting the USB.
7. Turn off your phone and unplug your USB cable from the phone (Let the USB be in your computer/laptop)
- Backup your own recovery (not required but suggested)
8. Open "Flash_tool.exe" from version "3.1224.0.sn85".
9. Click on File > Open Scatter-loading file, then browse to "C:\GooApple\MTK Rom Studio 1.1.77.146" and open "MT6573_Android_scatter.txt".
10. Click on the Read back tab (top). (If there is anything in the list, please Remove it.)
11. Click on Add and double click on the ROM_1.
12. Now type recovery.img at Filename, then browse to "C:\GooApple\MTK Rom Studio 1.1.77.146\SPFT_UPLOAD" and click Save.
13. In the popup, select
* Type: Hex
* Read Method: Read Page Only
* Start Adress: 0x980000
* Length: 0x00500000
And click Ok
This info can be found when loading the Firmware.info in MTK Rom Studio
14. Click on Read back. Now hold the "Volume -" button and insert the USB in your phone. It should say OK at the end.
Now you have a backup of your original recovery.img in case you want to restore it.
- Installing CWM Recovery (REQUIRED FOR ROOTING!!)
14. Go to the CWMR Recovery's folder, then choose if you want the Standard CWM or the Touchscreen CWM and copy the recovery.img included to "C:\GooApple\MTK Rom Studio 1.1.77.146"
* Standard CWM is controlled by Volume up and down. Touchscreen CWM is controlled by both.
15. Open "Flash_tool.exe" from version "2.1134.00".
16. Click on Scatter-loading and browse to "MT6573_Android_scatter.txt" in MTK Rom Studio and open it. (Click OK on the popup)
17. Now make sure everything is unchecked EXCEPT "RECOVERY". (Don't forget that your phone should be turned off and unplugged.)
18. Now click on download and insert your USB cable. It should say OK at the end.
Now you have CWM Recovery installed.
- Rooting the phone
19. Start your phone and connect to USB Storage Mode.
20. Copy "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" to the ROOT of your SDcard. And turn off USB Storage (but keep your USB in)
21. Now boot your phone into recovery mode. There are 2 methods, I prefer method #2 as it's more safe and works most often. (Someone's phone kept vibrating while doing method #1)
* Method #1:
- Shut off your phone (wait untill it vibrates to make sure it's completely off).
- Hold the "Volume +" button and the "Power" button.
- You now are in recovery or your phone keeps vibrating.
* Method #2:
- With your phone on, start "cmd.exe" as administrator on your PC.
- Type "cd C:\GooApple\ADB" (without the "") and press enter.
- Type "adb reboot recovery" (without the "") and press enter again.
- Your phone shall reboot in recovery.
22. In recovery, select "install zip from sdcard", then "choose zip from sdcard" and select "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip". Select "Yes - Install ..."
* Recovery Controls (Standard CWM)
Volume + = UP
Volume - = DOWN
Power = Select
Home = Go to +++++Go Back+++++
23. Once completed, select Go Back, and select wipe data/factory reset.
24. Now select "reboot system now".
And here we go... Your GooApple V5+ is Rooted !
Thanks again yuweng for the support !
____________________
How to Increase Internal Memory - INT2EXT method (ROOT required)
"INT2EXT on MT6575 / 77 for the extreme gamers !" for GooApple V5+ thanks to yuweng !
- NOTE: THE PHONE TENDS TO BE SLOWER AS IT HAS TO LOAD FROM THE SDCARD
Based on yuweng's tutorial : http://www.mediafire.com/view/?7zjz4onhos826bk
Download and/or install and extract these:
MiniTool Partition Wizard (Home edition) - http://www.partitionwizard.com/download.html
INT2EXT-mtd.7z (Includes install-recovery.sh) - http://www.mediafire.com/?16psto1xqw4b0s0
Notepad++ (To edit install-recovery.sh) - http://notepad-plus-plus.org/download/v6.2.3.html
ES File Explorer File Manager - https://play.google.com/store/apps/...sMSwxLDEsImNvbS5lc3Ryb25ncy5hbmRyb2lkLnBvcCJd
BACKUP YOUR GOOAPPLE V5+ WITH CWMR
1. First I installed and opened MiniTool Partition Wizard and mounten my SD card (32gb & Class10) with going in USB Storage Mode.
2. In MiniTool Partition Wizard, I selected my drive and resized it from 29gb to 26gb (FAT32).
3. Then I selected the remaining 2.5-3gb and created a new partition : Primary , Ext4 , 4kb. Don't forget to click Apply at the top left.
4. Then I extracted INT2EXT-mtd.7z and installed Notepad++.
5. With Notepad++ , I opened install-recovery.sh and changed unbind to bind in lines 61, 66, 71 and 98. Then saved it.
6. Now I copied the EDITED install-recovery.sh to the root of my /sdcard/ (Location when you open your phone).
7. Having ES File Explorer File Manager (EFEFM) installed, give it Root acces via the Settings at the bottom (check everything at root settings).
8. Next, select install-recovery.sh in EFEFM and copy it to /system/etc/ and give it full read/write/execute acces.
9. After this is done reboot your phone. For me, after the first boot it just shutted off. So then I had to power it on again and I had 2.6gb internal memory.
Hooooorah ! :good:
Thanks again yuweng for the files, info, tutorials and time !
Proof
____________________
Change BOOT logo to iPhone's Apple
So this will change the boot logo of your GooApple from an Android logo to Apple logo.
The things you need:
The boot images - http://www.mediafire.com/?363hvgcmw46wl6w
ES File Explorer File Manager or Root Explorer
1. Extract the iphoneboot.zip to your /sdcard/ so you have /sdcard/system/logo/...
2. Open the file manager, browse to /sdcard/ and copy the system folder.
3. Next go to the root of your phone and change the permissions to R/W.
4. Now paste the system folder here so it overwrites the system logo files.
5. Reboot your phone and voila, now you have the iphone boot !
____________________
Tips&Info
- Make 3 backups of your phone through CWM Recovery because some might get corrupt.
- Use Titanium Backup Pro or a similar tool to remove unused/chinese system apps.
- The MTK6575 can be compared to the PowerVR processor. So the PowerVR games work on the GooApple V5+.
____________________
Custom Recovery *.img
CWM Recovery v6.0.2.7 - Standard Version (MTD partition)
CWM Recovery v6.0.2.7 - Touchscreen Version (MTD partition)
TWRP Recovery - Touchscreen (MTD partition) : Make sure when doing a backup you choose "External".
____________________
Change BUILD.PROP for more compatibility of Apps&Games
Your phone is being recognized as a Android Alps phone which a lot of apps don't even recognize.
So the best thing you can do is change your "build.prop" a little to increase the compatibility.
For example, yesterday I bought N.O.V.A. 2 which says it's not compatible (but it is).
1. Open Root Explorer or something similar.
2. Go into /system/ folder. Make sure the folder is R/W.
3. Press and hold on build.prop then select "Open in Text Editor".
4. Next, change the following.
- ro.product.model=GT-I9000
- ro.product.brand=samsung
- ro.product.name=GT-I9000
- ro.product.device=GT-I9000
- ro.product.board=GT-I9000
- ro.product.manufacturer=samsung
5. Then go back and it will ask you to save it. Save it.
6. Now reboot your phone and try again with more compatibility !
____________________
Useful Downloads
Android
- ES File Explorer File Manager - Tool to browse your folders and copy/paste/delete - Free
- Older MobileUncle Tools - This version is better for changing the recovery via a tool. (name: m44tools.apk, it also includes the 2 recovery's for this phone) - Free
- MobileUncle Tools - Special tool for MTK Android Devices - Free
- MobileUncle Flashlight - App to switch on/off the flashlight - Free
- Pimp My Rom - Awesome tool which has settings to increase for example your phone's internet speed !
- Explorer (or Root Explorer) - Tool to browse your folders and copy/paste/delete - Free or $
- Titanium Backup (or Pro) - Tool to backup/uninstall apps (also for system apps) - Free or $
Computer
- Xmedia Recode - Tool to convert videos to compatible videos for GooApple V5+ (Use iPhone 4 preset)
CLICK TO BROWSE OFFICIAL ROMS
This is the original ROM that comes with the phone : https://dl.dropbox.com/u/76038325/Gooapple_V5_Plus_ROM_A116A_V1.0_P2MB3_20121110.rar
To check which ROM version you need, dial *#2170#*.
The number didn't work for me but they said it works at the official GooApple site. I used A116_4S to update my phone.
IF YOU FOUND SOMETHING OR JUST WANT TO ASK SOMETHING PLEASE FEEL FREE TO POST BELOW
I really want to thank the following people:
yuweng - Always helping me out with troubles.
bigrammy - Giving me the tip to use an older version for doing a Download in SPFT.
The phone can be bought at Android-Sale.com
What I wish to do with this phone and might need help for:
ROM (standard and v5+4s_a116_ios_root_12.11.16_Launcher)
- Get GPS to work on my phone. (Still don't know if it's just me or the phone.)
- Change the USB Storage Mode image to something like the iPhone by editing Framework-res.apk.
- Increase Internal memory by taking System's memory.
ROM (v5+4s_a116_ios_root_12.11.16_Launcher only)
- Remove all the chinese icons in "Google Pinyin IME" keyboard and add AZERTY for Belgium and France.
GooApple V5+ Manual
Thanks to "Q" for looking up this valuable information !
How to take a screenshot:
Tap both the "Home"-button and "Power"-button simultaneous. If you have sounds activated, you'll hear a shutter sound.
How to force restart:
Deep at the bottom of the 3.5 headphone jack there is a restart-button. Use a small tool like a bent paperclip or toothpick to reach it.
You can use this restart-button if your phone freezes and can not be restarted using the normal power-button.
THIS IS A LIFESAVER !
Recovery-menu explained:
The Recovery-menu is a boot-menu that can be used to backup, restore, clean cache or change ROMs in your GooApple phone.
This menu can be either in English or Chinese and may vary slightly depending on what type of Recovery came pre-installed on your phone.
You can install a different Recovery-menu on your phone like CMWR / TWPR
To access the Recovery-menu:
- Turn off your phone.
- Press and hold the PLUS-button and POWER-button on your phone until you arrive at the recovery menu.
NOTE: Depending on ROM and Recovery-version, you may actually need to press MINUS-button and POWER-button to access the Recovery-menu
Factory-test-menu:
This can be used to test the hardware functionality of your phone.
To access the Factory-test-menu:
-Turn off your phone.
-Press and hold the PLUS-button and POWER-button on your phone then lose it and hold it again after the vibration.
NOTE: It doesn't always work so you really need the perfect timing.
Navigating the user-interface:
This menu you can close running apps on the background so pretty usefull sometimes.
- Double-tap the "Home"-button shows running/standby apps and possibility to close apps by long-pressing icons in deployed menu.
- Double-tap the "Home"-button at the unlock-screen will show you the music player and a button to quickly acces the camera.
- Hold the "Home"-button to acces Wallpaper and Settings faster.
- Pressing the "+"-button when using the camera will take a picture.
NOTE: Double tapping must have some kind of pace in pressing these 2. If you do it too fast, ut doesn't work.. but too slow, it doesnt work either, so it has to be right.
- "Long-pressing" an icon in the menu makes the icons jiggly so you can change the position of your icons by dragging them to a desired position or on another icon to create a folder.
- "Long-pressing" the MINUS-button can bring up a menu in some applications. - UNCONFIRMED
Trouble hanging up a phone-call?
- Holding the phone vertically during a call turns off the screen (if the light-sensor has been covered).
- Holding the phone horizontally for a few seconds, will turn the screen on again and display the "End call"-button.
NOTE: Make sure you never double-tap the "Home"-button during a call. It will minimize the calling session so you will still be calling in the background. So make sure you always press the "End call"-button.
Change user interface language
If you cleared user data when installing a new ROM, the phone is likely to boot up in Chinese. Follow these steps to change it back to English:
- Press the Settings-button (you can probably identify this by its icon).
- Select the 9th option (General)
- Select the 8th option (International)
- Select the 1st option (Select language)
- Select your language.
NOTE: If you want some influence of your native language, you can install MoreLocale2 from GooglePlayStore. Some apps will be in your native language.
How to change the IMEI-number:
To change the IMEI number, you most likely will have to use MTKdroidTools from MediaFire.com.
It has an option to change the IMEI number but for this, you will need:
- the ADB drivers to be installed.
- A new IMEI number with what you want to change the original one.
- Phone connected to your computer.
How to add more Ring, SMS, Notification - sounds on your GooApple:
- Connect the phone to a computer in USB Storage Mode.
- Create the following folders on your SD-card:
- Ringtones
- Alarms
- Notifications
- Move your own sounds into the appropriate folder.
- Adjust the sounds-settings on your phone here:
- Ring-tone: Settings>Audo profiles>General>Voice call ringtone
- SMS-tone: Settings>Auido profiles>General>Notification ringtone
- Alarm-tone: Enter your Clock-app and add a new alarm and you should be presented with ringtone-options.
How to remove the backcover and change the MicroSD:
You might want to remove the backcover to change the MicroSD card or maybe even to change the cover.
To remove the cover:
- Unscrew the 2 screws at the bottom of your phone. You need a special screwdriver for this.
- Slide the back cover up once the screws are removed.
To change the MicroSD:
- Having the cover removed, you will see the SD card to the left of the battery trapped in some aluminium cover.
- Slide the aluminium cover to the left and now you can remove the SD card.
To put the cover back on:
- Put the cover back in its place, then drag it down (instead of up to remove it).
- Put the 2 screws back
Thanks mate! Very helpfull
AShacks said:
Thanks mate! Very helpfull
Click to expand...
Click to collapse
No problem !
And can anyone with a GooApple V5+ please try this to fix the GPS signal?
1. Charge your phone completely (100%)
2. Download and install Mobileuncle MTK Tools from Google Play.
3. Go to Settings > Location Services and turn off everything here. Also turn off WiFi.
4. Now turn off your phone. Then turn it back on and enable WiFi.
5. At Settings > Location Services
- Enable : Use wireless networks.
- Enable : Use GPS satellites
- Enable : GPS EPO assistance -> Go into EPO Settings and check the EPO file info if it's downloaded, if not, make sure you're connected to the internet and uncheck/recheck Auto Download.
- Enable : A-GPS
6. Open Start Mobileuncle MTK Tools and go to Information and click on Full , then Cold and go back to Satellites.
7. Go outside/window/balcony and after a while, the red dots should become green.
Source: peterssson
They say it works for MTK 657x models but it doesn't work for me. I keep getting red dots instead of green.
Drivers
Hi,
My Gooapple V5+ arrived.
I'm quite lost since no manual inside and this is my first android.
Regarding the rooting issue, I first decided install drivers. As I read, the process is connecting USB to PC and wait for Windows to ask something and then navigate to MT6575 USB VCOM drivers forder.
However, Win7 recognized V5+ as an Android device and installed some drivers, including "My HTC" (?)(!)
Now I can access SD card and maybe something else (I have no idea what) but I can't connect to internet through USB
The big quiestion now for me, in order to root the phone, is how to install drivers properly, bcos we have:
drivers preloader MT65xx
Android ADB Interface
MT6575 USB VCOM drivers
usb_driver
usb_driver_MT65xx_Android_ZTE_v821
I have a Win7 x64 laptop
About the GPS, I have just attempt fix my possition with "MAPS", but despite I downloaded some file, I can't fix possition bcos I'm indoors now.
Thanks for any comments
I'm not sure how the USB thetering works but I'll look into it.
About the drivers. I do it like this: plug it in, then choose the DRIVERS folder and let it choose automaticly.
Android device is correct, but I haven't seen the HTC one though, I'd recommend uninstalling that one.
But really , it can do a lot if you just plug it in, let it search the driver automaticly (don't select any specific folder, just DRIVERS if you really need to).
Also the VCOM driver is more for when you're about to flash your recovery through SPFT which it will install automaticly.
If you need any "personal" help on rooting it, feel free to ask, I'll support you via skype/facebook/teamviewer.
And I too am using Win7 64bit
It seems that Win7 installs a Google pack of USB drivers when detects Android devices.
Maybe this one I found:
softpedia.com/get/MOBILES/Google/Google-USB-Driver-Revision4.
And bcos GooApple is not in the list, Win7 chooses HTC that has 6575 chip aswell.
I will try to uninstall "My HTC" but Windows prefer this to any in the DRIVERS folder, perhaps is more up-to-date.
Any way, automatic driver download/installing maybe problematic with this phone.
Thanks a lot for support. I will need some days to become familiar with the phone before the next level
Thank you, is a very useful guide ! :good:
"Q" said:
It seems that Win7 installs a Google pack of USB drivers when detects Android devices.
Maybe this one I found:
softpedia.com/get/MOBILES/Google/Google-USB-Driver-Revision4.
And bcos GooApple is not in the list, Win7 chooses HTC that has 6575 chip aswell.
I will try to uninstall "My HTC" but Windows prefer this to any in the DRIVERS folder, perhaps is more up-to-date.
Any way, automatic driver download/installing maybe problematic with this phone.
Thanks a lot for support. I will need some days to become familiar with the phone before the next level
Click to expand...
Click to collapse
Ehm it shouldn't say GooApple V5+ in device manager.
For me it says Android Phone > Android ADB Interface and when I turn on USB storage, I just get Portable Devices: G:\.
So yeah, strange it uses HTC. And sorry that I cannot explain properly how to install the drivers because I just installed a few drivers , uninstalled some and installed some other and it worked.
But the most important thing is that the VCOM driver is installed. Which will automaticly install once you try the *Read Back* method. OR this might work too:
Turn off your phone. Plugin the USB cable in your computer but not in the phone (yet).
Now hold the Volume + button and then insert the USB cable into your phone. I think now, it should install the VCOM drivers automaticly.
And no problem Anhuc ! I haven't had time to test some things as I'm in a period of getting a job for the rest of my life
Drivers Problem Fixed!!
Well, for some reason my V5+ only accept VCOM driver if press "+" when plug-in USB in phone OFF, as you suggested.
If connect USB to PC with phone "ON" it ONLY accepts Android ADB Composite Interface, as you said.
So thanks everybody for suggestions and comments. I thing the first challenge overcome :good:
PS:
About the HTC driver I had first, maybe it was bcos I had MOBILE-EDIT software, wich installs many drivers, so I had to remove it from ControlPanel/Pograms/Unistall
But after it, connected phone to PC and it installed automatically "My HTC" driver again
So removed driver from DeviceManager and also removed Google Android USB Package from PC execiting "pnputil.exe -e" in command prompt, to see the OEM# of package, then removed with "pnputil.exe -d Oem#.inf"
Seems extrange but works great. (see details here: technet.microsoft.com/en-us/library/cc730875.aspx)
I have taken some screen shots of this in case someone need.
Hope may help people with persistent drivers....
"Q" said:
Drivers Problem Fixed!!
Click to expand...
Click to collapse
Good to hear that Q and thanks for sharing the information on what was causing it !
It can always help someone else out who has the same issue.
Anyways, I guess you can get to the part of flashing the phone with CMWR right?
I suggest jus reading the first part of the Rooting untill installing CMW and start there as thats the basic thing you need to do as the files I uploaded already include the patched recovery.img.
To see some pictures, check this out : http://www.mediafire.com/view/?8mxvy0ey5yfdu59 page 16 thats basicly how to Download recovery.img to your phone. But always follow my tutorial or ask me to do it for you
GPS without signal
Yes, I downloaded averything from v5+ tutorial and carefully read and understood this excellent work.
However, manage GPS to work is my priority now.
Is there any light in the dark?
I tried and tried, downloaded EPO files, used MTK Tools and even installed an iGo My Way version compatible with Retina screen.
One hour in the field and only saw a little signal bar of one satellite (if it was a satellite) but no points (red or green) at all in MTK Tools.
Have someone seen at least a single pretty point in the grid?
Thanks for any help.
"Q" said:
Yes, I downloaded averything from v5+ tutorial and carefully read and understood this excellent work.
However, manage GPS to work is my priority now.
Is there any light in the dark?
I tried and tried, downloaded EPO files, used MTK Tools and even installed an iGo My Way version compatible with Retina screen.
One hour in the field and only saw a little signal bar of one satellite (if it was a satellite) but no points (red or green) at all in MTK Tools.
Have someone seen at least a single pretty point in the grid?
Thanks for any help.
Click to expand...
Click to collapse
Ooh thanks for helping out.
I do get red dots yeah but they don't turn green :/
Things you could try is
Download GPS Status & Toolbox : Launch GPS Status & Toolbox. You'll see a compass and some other stats. Hit the menu button for more options.
Make sure you have an active data connection and go to "Manage A-GPS State". Then, tap the "Download" button in the menu that pops up. When it's done, exit the app.
And another thing that made me come closer was changing the gps.conf but I dont remember what tool to use. You can do it manually though. (It's located in system/etc)
For Belgium
NTP_SERVER=be.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
# DEBUG LEVELS:
# 0 - none, 1 - Error,
# 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
DEBUG_LEVEL =0
ACCURACY_THRES=5
INTERMEDIATE_POS=0
ENABLE_WIPER=1
SUPL_HOST=supl.google.com
SUPL_PORT=7276
REPORT_POSITION_USE_SUPL_REFLOC=1
# blank
Click to expand...
Click to collapse
bOyka8 said:
Ooh thanks for helping out.
I do get red dots yeah but they don't turn green :/
Things you could try is
Download GPS Status & Toolbox : Launch GPS Status & Toolbox. You'll see a compass and some other stats. Hit the menu button for more options.
Make sure you have an active data connection and go to "Manage A-GPS State". Then, tap the "Download" button in the menu that pops up. When it's done, exit the app.
And another thing that made me come closer was changing the gps.conf but I dont remember what tool to use. You can do it manually though. (It's located in system/etc)
For Belgium
Click to expand...
Click to collapse
Okay!
At least I have the dots in grid.
8 satellites in red but no singnal bars :/ after 30 min with all assistance enabled and filter off.
It's very strange, all my GPSs (I have 4 more devices) can get possition from cold in less than 20 min,
Some firmware issue here, I pressume.
I will contunue with this...
bOyka8 said:
Anyways, I guess you can get to the part of flashing the phone with CMWR right?
I suggest jus reading the first part of the Rooting untill installing CMW and start there as thats the basic thing you need to do as the files I uploaded already include the patched recovery.img.
To see some pictures, check this out : http://www.mediafire.com/view/?8mxvy0ey5yfdu59 page 16 thats basicly how to Download recovery.img to your phone. But always follow my tutorial or ask me to do it for you
Click to expand...
Click to collapse
Ok, I need the V5+ rooted to get access to system/etc....
After reading e/t in tutorial, just a stupid question: " I will loose all changes after flashing, and will need to begin again with configurations?"
I think I know the answer
"Q" said:
Ok, I need the V5+ rooted to get access to system/etc....
After reading e/t in tutorial, just a stupid question: " I will loose all changes after flashing, and will need to begin again with configurations?"
I think I know the answer
Click to expand...
Click to collapse
I don't think so, you can still do it without losing everything.
Just flash the recovery.img, then install the rooting zip and you're good to go !
And if you need help rooting this baby, I can do it for you in 2 hours from now
bOyka8 said:
I don't think so, you can still do it without losing everything.
Just flash the recovery.img, then install the rooting zip and you're good to go !
And if you need help rooting this baby, I can do it for you in 2 hours from now
Click to expand...
Click to collapse
I managed to do a recovery.img of my last configuration.
All ok, except that phone hangs after the OK green circle on PC screen.
Non responding at all, all black.
But reset from 3.5mm jack and all ok again.
Will do another backup from factory setings, just in case...
what happens after installing CWM Recovery?
can work as normal with phone?
Thanks for 2h supporting
problem!!
bOyka8 said:
I don't think so, you can still do it without losing everything.
Just flash the recovery.img, then install the rooting zip and you're good to go !
And if you need help rooting this baby, I can do it for you in 2 hours from now
Click to expand...
Click to collapse
Well, something bad happened.
Afetr the backup opperation tha finished OK, it has a wrong behaviour with battery icon.
Sometimes show the pugged icon and others a ray inside.
When turn off, it finish ok and then vibrates, but a few seconds later the battery icon charging fills the scren (unplugged of course) and few seconds later disappears.
Not a big problem, but after it I tried a second backup after factory settings restore and this time when plug USB on phone while pressing "-" nothing happens. PC do nothing (not installing drivers as before) and flash_tool can't finish the last part of procedure.
I even used differnt cable but nothing. USB parameters are as suggested....
Please help!
Thanks
"Q" said:
Well, something bad happened.
Afetr the backup opperation tha finished OK, it has a wrong behaviour with battery icon.
Sometimes show the pugged icon and others a ray inside.
When turn off, it finish ok and then vibrates, but a few seconds later the battery icon charging fills the scren (unplugged of course) and few seconds later disappears.
Not a big problem, but after it I tried a second backup after factory settings restore and this time when plug USB on phone while pressing "-" nothing happens. PC do nothing (not installing drivers as before) and flash_tool can't finish the last part of procedure.
I even used differnt cable but nothing. USB parameters are as suggested....
Please help!
Thanks
Click to expand...
Click to collapse
Are you using the correct version of SPFT?
For read back you need the v3... (use -) for download you need v2.... (dont use -)
And yeah with this recovery, and root everything works the same !
fixed
bOyka8 said:
Are you using the correct version of SPFT?
For read back you need the v3... for download you need v2....
And yeah with this recovery, and root everything works the same !
Click to expand...
Click to collapse
Fixed!!
Nothing worked to make it responding to USB...
Cables ok, config of USB ok too....
Decided opening phone and release power from battery cables.
I have never did it before but succeed on it
Now repeated opperation and made a successful backup in factory settings
Again I had to reset from 3.5mm jack
All ok, no problems (perhaps battery icon, but not sure)
Will continue rooting later
Hi All
Today I am releasing Moto X Play (India) Official Marshmallow 6.0 OTA ZIP File. This was released by Motorola for Indian Version of Moto X Play. Get your hands dirty and share your feedback. :laugh:
Mega - https://mega.nz/#!KVB3wSyb!_Wdce9oQOcKGPeXl26GLsgftwnanDTq-QZ9TRhdJprA
Dropbox - https://www.dropbox.com/s/p4ixlrg0naml1c6/Blur_Version.24.11.18.lux_retasia_ds.retasiaall.en.03.zip?dl=0
Google Drive - https://docs.google.com/uc?id=0B8kDOqfxRXEhRjZ0b3o3OHA1bnc&export=download [Credit For Google Drive URL - @amitnvis]
GitHub - https://github.com/motoxplay/stock/releases/download/v6.0.0/file_delta-ota-Blur_Version.23.21.10-24.11.18.lux_retasia_ds.retasiaall.en.03.zip [Credit For GitHub Link - MastahF]
This OTA Update can be applied ONLY on Android 5.1.1 Build LPD23.118-10 and will be updated to Android 6.0 Build MPD24.65-18. Users who have Android 5.1.1 Build LPD23.118-32 have to wait for OTA from Motorola OR get the update from Moto Care Service Centre.
==================================================
Filename : Blur_Version.24.11.18.lux_retasia_ds.retasiaall.en.03.zip
MD5 : 97de580ffa00578e79ef0b1d1cf9ace1
SHA1 : f778fabf0822f943aabc6d7382f1df97bdb25709
CRC32 : 65ab8e6f
SHA-256 : 57fc7c74288eb2e9b01b9e175f32f2cf49c4cbd5311289a77ab7963da2f71ff6
SHA-512 : 786b9fb8398a14b201a4b97c8a4c3e68884137b97eaae653d2ea7512bde01377c32a672b4caae5cf36d7cb351bd011c083c7efe70e4bca72c4da02b6e10b973a
SHA-384 : e460d760ec1a8ffaf50ec6c2a46011c43049aa900cc65194f8f0e73a570dfe66ca39658614a7e8575376bec6021eae56
Modified Time : 12/9/2015 12:58:28 AM
Created Time : 12/9/2015 12:51:13 PM
File Size : 611,237,778
File Version :
Product Version :
Identical :
Extension : zip
File Attributes : A
Model : Indian XT1562 100% [ Unsure if it will be compatible with other regions and variations of handset ]
==================================================
NOTES :
This has to be used on Android 5.1.1 to upgrade to Android 6.0! You will not get any update notification in Android 6.0 for this update BUT will get for any newer builds. This is OFFICIAL FINAL UPDATE. So don't post comments again like "Will i get update notification after applying this update". Why will you be notified by Motorola to apply same update that you have already applied ?
Announcement
New Update Adding VoLTE Support Can Be Found At http://forum.xda-developers.com/moto-x-play/general/moto-x-play-india-official-marshmallow-t3407068
Regards
XDASNR
Steps To Update To Android 6
Save the downloaded file to Root of SD Card and follow instructions :
Method 01 [Reported By Many Users]
Just Save the downloaded file to Root of SD Card [External Memory Card and not Internal Memory] and go to Settings --> About Phone --> System Updates. Update will be auto recognized and user will be prompted to apply update. In case update is not recognized and do not get any update prompt, then try Method 02.
Method 02 :
With the phone powered off, press and hold the Volume Down button and the Power button at the same time until the device turns on.
Press the Volume Down button to highlight "Recovery mode"
Press the Power button to restart into Recovery mode.
You'll see an image of an Android robot with a red exclamation mark.
While holding down the Power button, press the Volume Up button.
Phone will auto reboot to Recovery Mode.
Using Volume Down Button highlight Apply update from SD Card and press Power Button.
From the contents of SD Card Listed, using Volume Up / Down button select dowloaded .zip File and press Power Button.
Updatation Process will start. It will take about 30 Mins to complete updatation.
Already exists 2 threads talking about that.
http://forum.xda-developers.com/moto-x-play/general/android-marshmallow-6-0-soak-otalink-t3265928
http://forum.xda-developers.com/moto-x-play/general/noobs-to-upgrade-moto-x-play-to-t3266264
Hi,
Thanks for youy sharing
Can't download the file now Error on Mega web site.
Dudlei said:
Already exists 2 threads talking about that.
http://forum.xda-developers.com/moto-x-play/general/android-marshmallow-6-0-soak-otalink-t3265928
http://forum.xda-developers.com/moto-x-play/general/noobs-to-upgrade-moto-x-play-to-t3266264
Click to expand...
Click to collapse
This is not the same OTA.
dont work. fake?
DieOrange said:
dont work. fake?
Click to expand...
Click to collapse
@DieOrange - It is Genuine. It is downloaded directly Moto Servers. The ones posted in other threads are for Brazillian Versions. This is Indian Version.
XDASNR said:
@DieOrange - It is Genuine. It is downloaded directly Moto Servers. The ones posted in other threads are for Brazillian Versions. This is Indian Version.
Click to expand...
Click to collapse
your link/mirror dont work. maybe you can upload to other hoster?
006fazer said:
Hi,
Thanks for youy sharing
Can't download the file now Error on Mega web site.
Click to expand...
Click to collapse
May be your ISP has blocked mega.nz. Is anyone else facing this issue ? I will have to upload it to other filesharing site in that case.
Thanks for sharing, I can't download either (Europe).
Thanks, I confirm that is impossible to download the file neither from the browser or from the mega plugin. I'm connencting from Europe.
This can be installed on the moto x play eu version or I need to flash the original India Firmware first? I've an non-rooted moto x play.
I have the same question
It could be. The Filename looks good. But with no Mirror it would be hard to test
Can't download even from mega app
XDASNR said:
May be your ISP has blocked mega.nz. Is anyone else facing this issue ? I will have to upload it to other filesharing site in that case.
Click to expand...
Click to collapse
not downloading error
Upload To New File Sharing Site In Progress
Refer Original Post For Additional Download Links To Dropbox
After many retry download started !!! in progress....
I finally downloaded file from mega. But I dont know what to do.
My build is:
23.21.10.lux_reteu.reteu.en.EU reteu
LPD23.118-10
it seems now Mega works. WTF.
You can add the second Mirror too. more is better
Apply through adb sideload => success
Boot in progress, optimyzing applications....
My device info:
Build number: rk3368-userdebug 9 PQ2A.190205.003 eng.hct2.20190411.192110 test-keys
Kernel version: 4.4.167
MCU version: MTCE_GS_V3.07_3
In settings menu I don't see lot of std android settings (probably hidden for normal user).
I would like to enable split screen (it is disabled by default - 7 inch screen), but I can not enter developer options.
Standard android way with tapping build number is not working.
I also tried apps (e.g. "developer options) but it does not work - it shows "First enabled developer options".
I also tried rooting (simple way) with code (*#htc#root#) in factory settings, and with kingoroot. It does not work.
Do I need use adb for that?
Additionally clock is not working properly. After vehicle shutdown signal - radio is falling a sleep. After wakeup it looks like time freeze.
If I activate GPS time adjust it makes clock late 30 minutes.
If I activate internet time update it makes clock late 1h - probably because of winter / summer time switch, but I don't see that setting (also hidden).
Any help would be pleasent
I would try to change to stock rom.
But Im not sure if that would be even possible if I do not enable developer options first and next usb debug to access adb and flash mode.
Maybe it could be done by MCU update file? somehow make it to change system configuration?
SZAMAN92 said:
I would try to change to stock rom.
But Im not sure if that would be even possible if I do not enable developer options first and next usb debug to access adb and flash mode.
Maybe it could be done by MCU update file? somehow make it to change system configuration?
Click to expand...
Click to collapse
for what vehicle is that HU ?
i have same for opel, and have problems with stering wheel buttons, when i press next or back button it react like i press it 2 or 3 times :/
do you know how to enter recovery in that unit? maybe flash other MCU file ?
It is my device
https://xtrons.com/renault-megane-iii-fluence-android-9-0-pa79mg3rip
For me wheel buttons work well.
However try to check factory settings
Settings > Factory settings > enter code (126 in my case) > Keys
I have there option to change CAN bus to proper vehicle model.
Unfortunetaly I don't have experience with flashing such devices. Until now I was flashing only smartphones.
There were lot of tutorials how to do that. For Android auto HU I dont know even how to start.
For smartphone you could enter recovery by adb, but first you need unlock USB debugging. If you have access to developer options you could do that - that is not my cas.. sadly.
EDIT:
I found solution for time issue
https://forum.xda-developers.com/showpost.php?p=72946736&postcount=4
EDIT2:
Better solution
1. Get root
https://forum.xda-developers.com/showpost.php?p=76725981&postcount=740
2. Use that app
https://play.google.com/store/apps/details?id=ru.org.amip.ClockSync&hl=pl
EDIT3:
1. Malaysk ROM!!!
Clock work without any problem, I have split screen on my 7 inch device
I have prepared hybrid ROM 1.04 / 1.05 (Android 9) -> its suitable for T1P2, T1P3, T1P4 version of Teclast T30
Its based on official global ROM 1.04 and chinesse 1.05 ROM.
In the folder with firmware 1.05, I replaced the scatter file and system.img from firmware 1.04.
The result is:
Version 1.0: firmware 1.04 with Google Play store and 60 Hz screen frequency, MUCH better touch response, containing all languages.
Version 1.1: same as version 1.0 + Magisk (ROOT) pre-installed
Version 1.2a: same as version 1.0 + TWRP 3.3.1 pre-installed
The big advantage of this procedure is the standard easy installation of the firmware via Flashtool.
Download:
look to attachments
Installation 1.0:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6771_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Firmware upgrade"
- Turn off your tablet.
- Press “Download” button to start
- Connect your tablet into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- Reboot System
Installation1.1:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6771_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Firmware upgrade"
- Turn off your tablet.
- Press “Download” button to start
- Connect your tablet into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- Reboot System
- Install Magisk Manager v7.5.1 or Magisk Manager v8.0.3
Installation 1.2a:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6771_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download only"
- Turn off your tablet.
- Press “Download” button to start
- Connect your tablet into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish
- - Wait aprox. 20 seconds
- Do not start tablet by normal way!!!
- To go to TWRP start the tablet by pressing and holding the Power and Vol+ buttons simultaneously, until text menu on tablet will appears
- On the tablet screen, use Vol+ to select "Recovery Mode", confirm the selection with the Vol-
- To control the TWRP connect the mouse to the tablet, because touch do not work in TWRP
- Click Cancel when prompted for a password
- Click on Wipe / Format Data / Swipe to confirm
- On question enter "yes"
- Click Back (3 times) and click to Reboot / Recovery!!!
- Install "DisableForceEncryption_Treble.zip"
- Install Magisk 21.1
- Click Reboot System
- Install Magisk Manager v8.0.3
- To easy access to TWRP instal Recovery reboot application
Note. Unfortunately, the touch does not work in TWRP, so a mouse and USB adapter must be used
If someone has a problem with Flashtool, fails to burn ROM to tablet, try install drivers " MTK_USB_All_v1.0.8.zip"
- unzip archive
- run file "MTK_USB_All_v1.0.8.exe"
- it will create desktop folder "MTK Usb Driver v1.0.8"
- run file \MTK_Driver_ ext\DriverInstaller.exe
- it will install drivers
- restart PC
- done
Edit 8. january 2021
Because XDA Admid removed my external download links I had to upload all files to attachments.
As a backup, all files are stored here also
to all T30 owners out there that suffer from touch-screen lag: rtb07 did a phenomenal job in creating this hybrid rom that fixes the issue. Installation is easy to do, just follow the above instructions.
I fixed my T1P2 EEA T30 using the 1.2a hybrid rom and could not be happier with the result. It is working like a charm now.
THX to rtb07!!!!
Welcome. Thank goodness I managed to correct that annoying touch mistake.
I would love to do installation 1.0 on my T1P2 but all the download links have been removed :/
Vandal4125 said:
I would love to do installation 1.0 on my T1P2 but all the download links have been removed :/
Click to expand...
Click to collapse
Because the XDA administrator deleted my external links to the files, I had to upload everything to the first post.
So now is all OK.
Thanks for this. I preordered this tab at launch in late 2019 and hated the touch response and just overall laggy feel, so it's been sitting in a drawer for over a year. This firmware actually makes it nice and smooth, also extremely simple to flash.
Yes, in my ROM version the touch finally works fine. It is tragic that Teclast only fixed this in the Chinese version 1.05 ROM and did not release a corrected version of the EEA / Global ROM. When I wanted to work normally with the tablet, I had to make a corrected version of Global ROM 1.04.
It is a pity that the manufacturer does not release new updates.
rbt07 said:
It is a pity that the manufacturer does not release new updates.
Click to expand...
Click to collapse
I bought 3 Chinese tablets from different company’s & not one of them have been updated by the makers, but my 2 years old Samsung S9 South Korean phone still getting updates.
Its really is poor customer service when they can easy fix the problems, thankfully there people like you around to do there job for them!
Hi!
First of all, thanks for your great work. I have ghost touch in my Teclast T30 and I've been looking for a solution for weeks. Some days ago I found this post and installed the 1.0 version, that should fix my touch-screen issue. The installation was succesful, but still having the same problem. Ghost touch in the bottom side. ¿What can I do to fix this? I have the T1P2 version.
Thanks!
Hi, I don't know if anyone else is reporting a problem with a ghost touch on our tablet. I have not encountered this problem. They all reported only a problem with low touch sensitivity, which was solved by this hybrid ROM.
Maybe you could try peeling off the protective film. But I don't guarantee it will help.
Does physical keyboard work with hybrid rom?
Yes!
This hybrid ROM saved my T30. What a fantastic work Sir rbt07! The screen response is now super fast. After installing the version 1.0 I spent over a hour scrolling up and down just trying to believe in what I was seeing. It became a much better tablet now. Btw I got stucked in the 0% format during the flashing process and had to install the MTK drivers on my laptop. I only installed the last driver "we had three folders there" and then I could complete the installation. You should invoice Teclast to pay you for your work. Thanks a lot mate!
jagoooodka said:
Does physical keyboard work with hybrid rom?
Click to expand...
Click to collapse
Yes it does work with the physical keyboard, I tested it myself
I'd like to thank you OP, this made my tablet actually able to play rhythm games to an acceptable degree. I didn't like to flash other ROMs because they all have a common issue: bluetooth connection. This ROM works flawlessly on my T1P3 by using it for 3 days.
Hybrid ROM is just a mix of two original ROMs, so it doesn't have many bugs.
Hi, do I need to unlock or do anything to my device before I can follow these instructions?
fieldmar said:
Hi, do I need to unlock or do anything to my device before I can follow these instructions?
Click to expand...
Click to collapse
It is not necessary to do nothing more, just follow instructions.
Hello @rbt07 ,
Thanks for the awesome rom
Works like a charm