Database Info

[GUIDE] :: SuperPad/FlyTouch2/WWE10 Android 2.2 V2.5 #4325 Froyo USB Flashing ::

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This guide is for:
SuperPad / Flytouch2 / WWE10 Tablets
Make sure you've got the right device.
- Infotmic 10.2" Flytouch2 SuperPAD
- It has 256MB RAM
- It has 2GB Internal Storage
- Android OS 2.1
- Have 2 MicroSD Card Slots
- 1024x600 Screen Resolution
- Infotmic X210 Processor
This ROM is NOT for you if your device is SuperPad 2 / Flytouch 3
- Infotmic 10.2" Flytouch2 SuperPAD
- It has 512MB RAM
- It has 4GB Internal Storage
- Android OS 2.2
- Have 1 MicroSD Card Slots
- 1024x600 Screen Resolution
- Infotmic X220 Processor
-------------------------------------------
Warning: Follow these steps. All of them. If you do, it will work. If you misread or miss a step or skip a step because you are hurrying through the process, it WILL brick your tablet. Flashing is a relatively simple process but it requires patience. If you don't have the time to read all of the directions and follow them, YOU DO NOT HAVE TIME TO FLASH, and stick with your old firmware.
I AM NOT RESPONSIBLE FOR ANY DAMAGE THAT THIS ROM HAS CAUSED. FLASH AT YOUR OWN RISK! SINCE THERE ARE SO MANY CLONES OF THIS TABLET, DON'T EXPECT IT WILL WORK PERFECTLY.
-------------------------------------------
Note: I'm not so good in English and grammar, so bear with me. The images is not so clear co'z im using webcam for fast capture and focusing.
If I made mistakes, corrections are welcome.
:: Super Improvement ::
- Much Faster response, you will notice playing Angry Birds is smoother.
- New Default Application updates
- New Icons
- New 3D Gallery
- Supports Flash on browser.
- GPS is now working, GPS app required to test the satellite lock.
- Youtube on browser working fine if you have fast connection.
:: Known Issues ::
- "Some" RJ45 (Ethernet) Port sometimes not working
- "Some" WiFi unstable
- "Some" 3G Device not working
- Market is still free, no paid apps.
- Save path not on MicroSD but inside your Tablet (fixed)
- When it sleeps, it sleep to power off.
- Youtube App is not working, you need to download another compatible version.
:: Thanks to the Donors ::
- Austin Pc Fixed .Com
- frank rugolo
- pastorb1
:: Credits ::
- stragulus
- dgcruzing
- isergio
- _barsuk_
- Aries on an Android (android tablet forum)
- rgocal (android tablet forum)
- and others who I forgot to mention
This guide is for Windows XP, I'm windows7 user before but I downgrade because I want to use my other old softwares for flashing. If you get the idea you can do this also on windows7.
------------------------------
NOTE:
- For windows7 user Run As Administrator the IUW application.
- 64bit Operating System may not work with IUW application.
------------------------------
NOTE: If your tablet showing version 6.1.5 (559[or higher]) or 0.6.1.2(587) Then you can skip some part of the guide. Scroll down directly to the "Alternative Solution" using MicroSD burning. You still need to download the Android 2.2 Froyo Main Firmware.
------------------------------
:: Preparing the Male to Male USB Cable :: (if you have one skip this)
Ok let's start, what you need is a male to male USB cable, if you don't have one you can make your own male to male cable.
Tools
- 2 USB Cable
- Scissor or Cutter
- Electrical Tape or anything to cover the exposed wire
- Solder Lead (Optional)
- Soldering Iron (Optional)
1. Cut each USB to the nearest tip of the female, to make your USB cable longer.
2. Cut each end of the USB to expose the wires and copper wires.
3. Now you can connect each end of the USB, and twist each wires, you can solder it if you like.
4. Now you can tape each wires, and tape all the wires.
This is the finish product.
:: Preparation for Files and Flashing Procedures ::
*Note: Please PM me if there are missing links.
Download IUW 1.1 Flashing Tool
Download Firmware V2852
Download Uboot - V 0.6.1.2(587) working camera
Download Main Android 2.2 Froyo ROM with Flash 10.1
Download New Ramdisk image to change the path of save files to SDCard1
Download Extra Tools Apps
Updated ROM: 25.11.2011
Download Firmware Froyo 2.2 v2.5 #4325
------------------------------------------------------------
:: Clean up the tablet files ::
- Wipe cache partition
- Wipe data/factory reset
- then reboot.
Remove all microSD so that it will not start burning if you have firmware on your microSD.
Visit this link how to clean the data for your tablet.
------------------------------------------------------------
:: Let's Start ::
1. Make a Folder on your desktop for fast track of your files, I named it Froyo 2.2 and save all your downloaded files here.
2. Download IUW Flashing tool, and save it inside the folder of your desktop.
3. After download, unpack it inside the folder.
NOTE: Your tablet should be full charged, and connect the charger while flashing, just to make sure it will not drain much power on your tablet. Don't forget also to remove all your MicroSD cards from the tablet.
4. Since your done making your USB Cable, your tablet should be off and plug the other end USB to the PC and plug the other end on your tablet USB Port between the headphone jack and SDCard Slot 1.
5. Open the IUW application, select Link USB on the left side. And on the Link information the DV (driver) is greyed, because it's not detecting the tablet with driver.
6. Power up the tablet with this combination Power + Menu button for few seconds until you see the message on your tablet "Communicating with PC..."
7. A New Hardware notification will pop up on your PC Screen.
(you have 2 minutes to setup this or the tablet will boot normally)
Select Advance, Next.
Browse the driver from your desktop inside the folder "otg_driver"
Then it will install the driver.
The flasher will turn to green.
:: FLASHING V2852 ::
This rom will only run on tablets which display a version number in the bottom-right "Infotmic" screen when first turned on.. If yours doesn't display a number there, you will need to flash firmware v2852 first.
8. 'Choose a wrapped image' press the "..." button Select the IUS file "WWE10B_Android_393477-v9full.ius"
9. Click 'burn' to flash the tablet.
This picture is flashing the tablet.
10. After burning finishes, plug out the USB cable and press Reset, then restart the device.
:: Flashing UBOOT ::
11. Open UIW application, and connect your tablet USB to PC.
12. Select "Link USB" on "USB Mode:" select "Expert Mode" Uncheck all except "UO".
13. Browse the "u-boot-nand.bin" the one with working camera.
14. After flashing this is the result.
15. Your screen with start to flicker, it will start to initialize.
16. I will take time to load up, until you are in display calibration.
:: Flashing IMAGES ::
17. Power off your tablet, and prepare again the UIW to flash the main android 2.2 firmware.
18. Click Link USB, and select Expert burn.
NOTE: Use the other Ramdisk.img fix you download, not from the flash10.1-android2.2 folder.
19. Power up the tablet with this combination Power + Menu button for few seconds until you see the message on your tablet "Communicating with PC...", if the Dv is green your ready and click the burn button.
20. I will take time to load up, until you are in display calibration and your Done!
:: Alternative Solution ::
If you cant burn the main android image using USB method. You can try the MicroSD card method, but this is only applicable if your tablet will display the version under the InfoTMIC start up logo.
Lets make a bootable MicroSD, to convert the file size to 700~705MB, you need a MicroSD at least 1GB.
Download WinHex with MicroSD Clone Image.
1. Open your WinHex
2. Click Tools->Disk Tools->Clone Disk->
3. On Source Raw Image: click the file button.
locate the "aben.start sector" file, click open.
4. On Destination Medium: click the drive button.
locate the Physical Media of your card reader/MicroSD, ok.
5. Fill in the Start Sector with 0 (zero).
6. Click OK, and WinHex pop up will appear, click OK and it will start cloning the image file to your MicroSD.
7. A notepad will pop up that you are done cloning the image, close and press OK on the pop up message.
8. Close WinHex, and safely remove the card reader/MicroSD.
9. Plug the card reader/MicroSD again, and do a quick format.
10. If you successfully formated the MicroSD to 700~705MB then create an "android" folder, and copy all the main image files on the folder. And your Done! :: If you fail there are some other reason, some card reader is not working properly, try to find another card reader, if your phone has MicroSD Slot and able to communicate and serve as card reader, you can use this also.
- ramdisk (use the other ramdisk you download)
- system
- uImage
- userdata
some optional or skipped file.
- u-boot-nand (android v2.2)
- zSYS (Flytouch Official Image 3245)
This is what's inside the MicroSD on android folder.
12. After copying the files plug the MicroSD at the top most/Slot 1 between the 2 USB port.
13. And Power On your Tablet, and it will start Flashing just like here on the video. http://www.youtube.com/watch?v=47kf4-Vbba8#t=3
You can also use this MicroSD to downgrade back to 3245 firmware.
Thank you.
Don't forget to click the Thank You button
joshgabel said:
SmaRkieS whats your Paypal email address? i owe you $ worked like a charm!
Click to expand...
Click to collapse
Confirmed that the 3G USB modem Huawei E1752 is working perfectly. Just create an APN and reboot while the Huawei E1752 is in the USB port.. After startup it makes a connection and works fast!
manually created an APN in settings/connections/mobile providers and configured for your local provider. Also enabled data connection, otherwise I won't start searching. After that reboot and it started working. No specials actions required.
:: Google Sync ::
If you want to sync the calendar (basic) and contacts go to:
Contacts-> Menu-> Accounts-> Add Account-> Corporate-> enter data for a google account -> choose the default setting -> set the sync options-> Enter the name
:: z4root USB Debug solution ::
1. Download Launcher Pro.
2. Install Launcher Pro.
3. Tap the Home Button at the upper left, it will let you choose different type of launchers.
4. Select Launcher Pro.
5. Tap Menu Button = or at press the menu button at the top of your tablet.
6. Tap the + add
7. Tap Shortcuts
8. Scroll Down, and Tap the Activities.
9. Wait it will load, scroll down to Settings.
10. Scroll down and look for Development.
11. Press OK without changing the name.
12. On Desktop/Home Tap Development.
13. Check the USB Debugging.
14. Restart if necessary.
15. And your done ready to root.
:: Enabling Live Wallpapers ::
1. After rooting your device, your good to go.
2. Install Busybox Installer.
3. Open Busybox Installer, OK, SuperUser request Allow.
4. If BusyBox is not found, tap Install.
5. Press Back Button on your tablet.
6. Install Terminal Emulator.
7. Open Terminal Emulator.
8. Type this commands.
Code:
su
mount -o remount,rw,codepage=utf8,vfat,xattr,check=no /dev/stl5 /system
cat /sdcard/LiveWallpapersPicker.apk > /system/app/LiveWallpapersPicker.apk
cat /sdcard/libRS.so > /system/lib/libRS.so
cat /sdcard/librs_jni.so > /system/lib/librs_jni.so
sample pic of my terminal emulator, I made a mistake in line 5 but it's ok just retype it.
9. Reboot your tablet.
10. Install your live wallpaper apps.
11. On your home screen, tap the menu button. (near the volume next to back)
11. Tap Wallpaper
12. Tap Live wallpapers
13. Select your live wallpapers, and your done.
sample screen shot.
:: GPS Configuration and Setup ::
Download GPS Test Tool
1. Install that app in your tablet.
2. Go to Settings
3. Go to Location & Security
4. Check Use wireless networks
5. Check GPS Satellites
6. Plug your GPS Antenna.
7. Take your antenna outdoor, if the wire is still long try to place the antenna higher.
8. Connect to your WiFi.
9. Run the GPS Status application.
10. Wait for 5~20 mins for satellite discovering and locking.
11. Wait for 5 satellite lock on and you are done.
12. Run your Google Maps, and your locked to your location.
This is the picture number of satellites and number of locked satellites.
The GPS is very accurate.
:: Dismantle/Dissemble of Superpad/Flytouch2 ::
http://www.androidtablets.net/forum/gome-flytouch-ii/14255-inside-my-superpad.html
===========================================================
This is my screen now.
with new virtual keyboard.
I also try swapper2, they say it can improve the performance. This is my Terminal Emulator.
Other Useful Guides here.
http://forum.xda-developers.com/showthread.php?t=1067746
http://forum.xda-developers.com/showthread.php?t=1048776
http://forum.xda-developers.com/showthread.php?t=831178
-------------------------------------

Good work
25-12-2012 -updated links
Download IUW 1.1 Flashing Tool iuw1.1-english.rar - 291.98 KB
Download Firmware Froyo 2.2 v2.5 #4325 - 4325.zip - 212.16 MB
Download Uboot - V 0.6.1.2(587) working camera u-boot-nand.zip v0.6.1.2(587).zip - 130.13 KB
Download New Ramdisk image to change the path of save files to SDCard1 Ramdisk_SmaRkieS.zip - 166.06 KB
Barsik recovery for superpad flytouch - recovery_rd.zip - 1.32 MB

Thank you, cause this people are lazy enough to open the pdf/docx file instructions hehehehe.
I made some mistakes on my post, please post some corrections and suggestions are welcome also.

Thank u for your instructions. Its the first time I manually try to flash my pad so I had to flash to 2852 rom first and it does but when i restart and check my version build it is still on build 1561 (flashing with usb cable).
Tried couple of times can u help me out?

kolk11 said:
Thank u for your instructions. Its the first time I manually try to flash my pad so I had to flash to 2852 rom first and it does but when i restart and check my version build it is still on build 1561 (flashing with usb cable).
Tried couple of times can u help me out?
Click to expand...
Click to collapse
Can you see the version under the InfoTMIC start up logo?
If you can see it then you are ready to update using MicroSD method.

@smarkies
no there is no version number
first time I connected to pc it said found new hardware but no driver. There I selected the otg driver in the package.
Burntool does connect and goes up from 0 to 100 procent (very quick about 7 secs.) when i burn but when i check im still on my previous build.
After that I tried to update to other firmware using update.zip on winhexed sd card. This did work so now I am on 1623 build.
after that I tried again using burntool but still didnt work out.
In the folder containing the 2852 rom there are also two folders
0.6.1.2_1.4.587_OV2655 and
0.6.1.5_1.4.587_GT2005
both contain uboot and uboot nand files is there something I have to do with them before I can flash?
Any advice?
Other thing I noticed: in recovery menu there is a line saying:
e:can't open / cache / recovery / command
It didnt stop me from update with update zip but could it be the reason burntool isnt working for me?

kolk11 said:
@smarkies
no there is no version number
first time I connected to pc it said found new hardware but no driver. There I selected the otg driver in the package.
Burntool does connect and goes up from 0 to 100 procent (very quick about 7 secs.) when i burn but when i check im still on my previous build.
After that I tried to update to other firmware using update.zip on winhexed sd card. This did work so now I am on 1623 build.
after that I tried again using burntool but still didnt work out.
In the folder containing the 2852 rom there are also two folders
0.6.1.2_1.4.587_OV2655 and
0.6.1.5_1.4.587_GT2005
both contain uboot and uboot nand files is there something I have to do with them before I can flash?
Any advice?
Other thing I noticed: in recovery menu there is a line saying:
e:can't open / cache / recovery / command
It didnt stop me from update with update zip but could it be the reason burntool isnt working for me?
Click to expand...
Click to collapse
dont touch any file inside the folder of 0.6.1.2_1.4.587_OV2655 and 0.6.1.5_1.4.587_GT2005.
Try to burn the UO first, u-boot-nand.bin the one with working camera, if not try this another u-boot-nand.
Then burn the Main Image Android Rom.

Thanks for the quick repy to be sure I wont Brick my Pad
for the uo file I use Uboot - V 0.6.1.2(587) or uboot - 0.6.1.5 (587)
and for the ROM files I only use files from the 20110416-v1001 folder?
If so I will burn right away

kolk11 said:
Thanks for the quick repy to be sure I wont Brick my Pad
for the uo file I use Uboot - V 0.6.1.2(587) or uboot - 0.6.1.5 (587)
and for the ROM files I only use files from the 20110416-v1001 folder?
If so I will burn right away
Click to expand...
Click to collapse
I abused my pad flashing many times, and still it is alive, It will brick if your USB cable is poorly made, or overpowered that will fry the motherboard of your tablet, just like what happen to other people.
the safest way to flash is microSD, but it is tricky with this froyo update that's why I risk on flashing using USB.
V 0.6.1.2(587) this one has working camera. But you can try both uboot to display the version under the InfoTMIC logo. But I use V 0.6.1.2(587) coz I want the camera to work fine.
Yes the files inside the 20110416-v1001 folder except for the u-boot-nand inside.
If the USB flashing doesnt work you can try the alternative, using the microSD.

Thank u very very much worked like a chime.
camera and wifi are working I used uo V 0.6.1.2(587)
will play with it tonight to see what else it can do now
Greetz

kolk11 said:
Thank u very very much worked like a chime.
camera and wifi are working I used uo V 0.6.1.2(587)
will play with it tonight to see what else it can do now
Greetz
Click to expand...
Click to collapse
Glad you made it! Check out the speed and the Gallery is now 3D
So you did the UO burn first then Main Image?
Confirm this and I will revise my post.
Co'z I burn my tablet the other way. Main Image then UO.

Yep U0 first than main Rom
Only thing is market has only free apps
but doesnt matter can get apps all over the internet

kolk11 said:
Yep U0 first than main Rom
Only thing is market has only free apps
but doesnt matter can get apps all over the internet
Click to expand...
Click to collapse
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
This is my screen now.
with new virtual keyboard.
I also try swapper2, they say it can improve the performance. This is my Terminal Emulator.

IUW does not work with 64 bit
Please add in the OP that some on other forum sites have confirmed that IUW does NOT work with any 64 bit operating system.
I will link to reference if I come across it again...
For Development USB debugging options for Z4Root, you may also want to link to my post HERE.

quick tip for windows 7 users, picture 6 will not happen, at least it didn't for me, you need to navigate to devices and printers, find the unknown device, and manually install the otg driver

Works as advertised.
I bricked my tab first, but got it up and running again with your step by step guide. Many thanks!

I followed your instruction for SD card and it worked perfectly. I now have the 3925 version on my Superpad and it seems to be working well. Definite improvement on Angry Birds(which I play way too much) and Home Run Battle 3D. WiFI works fine, don't know about GPS or camera as I don't really use them, but I will check just for curiosity sake Seems to be faster and I have had no random lockups that I had with the v5 I had on previously. I will report back as I use it. Thanks for all the great work!

Jiggity Janx said:
Please add in the OP that some on other forum sites have confirmed that IUW does NOT work with any 64 bit operating system.
I will link to reference if I come across it again...
For Development USB debugging options for Z4Root, you may also want to link to my post HERE.
Click to expand...
Click to collapse
Yes, that's why I made it with Windows XP, and we are aware that 64bit OS is so choosy in terms of software compatibility.
About the USB Debugging, I already made a guide after the Flashing/Burning guide.
caravanman said:
quick tip for windows 7 users, picture 6 will not happen, at least it didn't for me, you need to navigate to devices and printers, find the unknown device, and manually install the otg driver
Click to expand...
Click to collapse
Yes, It is self understanding, there is a note above I use windows XP, but the idea is still there.
If you like to contribute for a guide in windows 7 is welcomed.
nullandvoid said:
I bricked my tab first, but got it up and running again with your step by step guide. Many thanks!
Click to expand...
Click to collapse
You are welcome, enjoy your new faster tablet.
woodeman said:
I followed your instruction for SD card and it worked perfectly. I now have the 3925 version on my Superpad and it seems to be working well. Definite improvement on Angry Birds(which I play way too much) and Home Run Battle 3D. WiFI works fine, don't know about GPS or camera as I don't really use them, but I will check just for curiosity sake Seems to be faster and I have had no random lockups that I had with the v5 I had on previously. I will report back as I use it. Thanks for all the great work!
Click to expand...
Click to collapse
Thank you so much, but I would like to suggest to remove the long quote of my post, just to make the thread clean.

SmaRkieS said:
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
FOr your confirmation I directly made the UO burn and than burned the main image burn never touched WWE10B_Android_393477-v9full.ius
Where can I find your post on applanet to get market running?
Thanks in advance
Click to expand...
Click to collapse

kolk11 said:
SmaRkieS said:
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
FOr your confirmation I directly made the UO burn and than burned the main image burn never touched WWE10B_Android_393477-v9full.ius
Where can I find your post on applanet to get market running?
Thanks in advance
Click to expand...
Click to collapse
pmed you.
Click to expand...
Click to collapse

[HOW TO] Root Nextbook8 Premium (and install market app) [UPDATED 1-17-12]

PLEASE BE ADVISED: THE AUTHOR OF THIS POST NO LONGER PROVIDES SUPPORT FOR THIS THREAD. HOWEVER YOU ARE MORE THAN WELCOMED TO CONTINUE USING THE FILES AND METHODS AT YOUR OWN DISCRETION. GOOD LUCK!!
INTRO: For all those searching the internet trying to find answers as to how to gain root on your Nextbook8 Premium and also gain access to the wonderful android market from which we were greatly deprived (as is the case with many low-priced tablets these days), the wait is over thanks to a certain someone who goes by the name of DEVMONKEY. Of course I take absolutely NO CREDIT for this and only took the liberty to re-write it thus adding a little more detail to the process. Enjoy!!!
DISCLAIMER​***I HAVE NOT TESTED THIS PARTICULAR ROM WITH MY N8 WHEN I HAD IT BUT AS THE PROCEDURE TO FLASH IS STILL THE SAME ALL SHOULD GO WELL. HOWEVER, I AM NOT RESPONSIBLE FOR WHAT MAY OR MAY NOT HAPPEN IF YOU USE THIS AND DAMAGE YOUR DEVICE. PLEASE FOLLOW ALL STEPS CAREFULLY***​
[HOW TO] Root and install Market on your Nextbook8 Premium​
UPDATE: This is post has been updated with a new rom to replace old one. Method of flashing is still the same so no worries. All those who want to upgrade to this rom from the one I previously posted in this guide when I first wrote it can just repeat the steps over again with the new rom package.​
This rom is based on Samhain's release: SamDroid v1.13
Modifications (mostly GUI / cosmetic tweaks):
1.) cifs.ko / slow-work.ko / nls_utf8.ko are in /system/lib/modules and can be loaded using Mount Manager app from the market. This will let you mount CIFS/SMB shares to the device.
2.) Honeycomb-like launcher and updated GUI icons. (you can change it to any Launcher you want)
A couple of things to note once you have installed the rom:
- It starts up in Italian, so open Android settings "Impostazioni" and go to the "Lingua e tastiera" setting, and change the "Seleziona lingua" to your preffered language.
- I've put a few wallpapers in /system/media that you can set full screen by going into Live Wallpapers and using the "Multipicture Live Wallpaper" set them to the screen.
- There are a few things (widgets) on the homescreen that don't work after initial boot, just remove them and add back whatever you want to the homescreen.
- Sleep of death issues seem to be fixed, and the camera works (Camera app works, but Skype and Fring don't work yet...).
- You can also grab Adobe Flash 11 from the market and it'll work correctly.
- This release boots MUCH faster, and is even more responsive than before.
- There is a cell standby issue that drains the battery more in theory so if you feel like that is happening with you just delete the Phone.apk and TelephonyProvider.apk from /system/app. You can use ADB or you can use Root Explorer to do so. You will likely have to force a reboot because you'll start getting repetitive force closes once you do so, but it won't hurt anything. Once you reboot, all is well.
VERY IMPORTANT: After installing custom roms that also flash a custom recovery your N8 may reboot into the custom recovery. If this happens hit reboot system and only reboot system.
​Download new rom from HERE and extract (using winRAR preferably) to your desktop or anywhere you choose. Location doesn't really matter for this guide to work.
NOTE: If you have anything you care about (like apps, notes etc.) on your N8 make sure you back it up now.
Step 1: Turn your N8 off.
Step 2: Press both Volume buttons down and plug the USB cord into the N8.
NOTE: On your screen you should see a bubble pop up in the lower-right corner saying "Installing drivers". Most likely it will say it can't find the drivers. This is normal. Continue following the steps to install the missing drivers.
Step 3: Open the Device manager by typing mmc devmgmt.msc into your "Run" box on XP or search box in start menu on Windows 7 and hitting enter (you can also find Device Manager in your Control Panel options in Windows 7).
Step 4: With your N8 still in an off state and plugged in via USB you should see a yellow exclamation symbol somewhere next to "Unknown Device" in the list of devices in the Device Manager. Right click on it and select "Update driver software".
Step 5: Now it will prompt you to choose how you want to search for it. Select "Browse my computer for driver software" and it will bring up a window for you to navigate manually to the driver location which is in the "drivers" sub-folder in the NEXTBOOK8ROOT folder. Select which ever system you have (32bit or 64bit) and then hit "OK". You might go thru one or two prompts before it actually installs. Just "OK" everything and you should be fine.
Step 6: Once the drivers are installed you are ready to flash. Go into the root of the NEXTBOOK8ROOT folder and select RK29update.exe (right-click for Win7 users and Run as Admin).
Step 7: Now you should be at the interface of the program and at the bottom in bold words it should say "FOUND RKAndroid rock usb" (if it doesn't then it mean the drivers probably weren't installed correctly). This part is VERY IMPORTANT!! Make sure all of the boxes on the left are checked (should look like the pic below). The one at top is the one usually missing a check and would need to be checked by you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 8: Once all boxes on the left are checked you are going to click on "EraseIDB" at the bottom and let it complete. Once that finishes click on "Run" and you will see a series of commands running in the right window pane (see pics below). Give it some time as it will probably take a few minutes. When it's done it should look like the second pic below.
Once the process is finished your NEXTBOOK should reboot into the recovery and reflash the OS. Congratulations!!! You now have an affordable rooted tablet with access to the Android Market!!
OTHER ROMS YOU CAN FLASH INSTEAD OF THE ONE IN THE ABOVE GUIDE:
Pisteone - [SDK 2.1] EXT4 Bluetooth 3G Root [Basic FW 1.0.21] ICS Style - LINK
Fintadroid - [FULL ROOT & EXT4] [BT & 3G] [FW.1.0.21 PRESTIGE] - LINK
ALL ROMS FOR NEXTBOOK8 - LINK (Be very careful and read before you flash)

Thanks! worked great.

I signed up, so i can say thank you. this worked perfectly.. i was skeptical and scared i'd ruin this tablet, as i got it as a gift, and was obviously disappointed to see no market on it, but this worked. thank you.

How about Nextbook Premium 7?

Thank you!
This worked great, I was able to get the android market installed and working.

Android version?
What version of Android does this install?
Cheers, Greg.

It's work, your are wonderful,thank you Sunnyboy167

Great job! Good to have root and Market working. But anyone else get FC when opening Camera app?

Perfect! I have rooted many Android devices and this is one of the easiest ones. Just read the directions carefully and you'll do fine.
Hopefully someone will release an ICS update for this device soon..after using my Galaxy Nexus, Gingerbread seems so...obsolete.

I'm glad you enjoyed this info just as much as i did
To everyone YOU ARE WELCOME but please....the best way to thank me is by hitting the thank button at the bottom right of my post. Thanks!
@xxProphecyxx - here is a link for the nextbook7 http://gunnersbarn.wordpress.com/2011/11/04/how-to-install-android-market-to-nextbook-premium-7/ I don't see any root method listed on the site but im sure there is one out there if you want to root it too. Or you can even take a chance if youre brave and use a one click root based on the android version you have.
@ghi07 - All this method does is re-install the OS (which is Gingerbread to answer your question) with market and superuser.
@dalerious - I'm sorry but I don't have a Nextbook anymore but if I did I would definitely try my best to help you. Try doing the entire process over and see if that works. Good luck!

THANK YOU!!!!
I was about to throw this tablet out the window!!! Followed the instructions and it works perfectly!!!! Thanks SO SO much!!!

Thanks to you I had a very Merry Christmas haha thank button has been pushed repeatedly!

Hi Sunnyboy,
Just want to say a big thank you for the detail post. I was about to give up on on this tablet when I came across your post.
Chris

help help!!!
hi sunny boy,
i just got my nextbook8 yesterday... come across this website and trying to root my nextbook last night at home...
I encounter this problem...when i plug in my nextbook into the PC USB ..it turn on from the off mode. and the pc started to scan the driver and it actually install successfully. I am running on win7. after that i cant install the driver required.. can anyone help me out here cos i try to run exe. file. it cant root my nextbook... i am helpless now...

I am also having problem with the camera. I'll have this error:
The application Camera (process com.android.camera) has stopped unexpectedly. Please try again.

HELP HELP HELP...not able to on the device after updated the driver....PC shows device found after plug in USB, which shows the device is working but just cannot on it.. a total IT dummy and not sure what's going on..someone said the ROM is damaged which cause this.....any way to recover the tablet..i just bought it for less than a week. HELP HELP HELP!!!!!! (tried reset but still no response)

Sunnyboy167 said:
To everyone YOU ARE WELCOME but please....the best way to thank me is by hitting the thank button at the bottom right of my post. Thanks!
@xxProphecyxx - here is a link for the nextbook7 http://gunnersbarn.wordpress.com/2011/11/04/how-to-install-android-market-to-nextbook-premium-7/ I don't see any root method listed on the site but im sure there is one out there if you want to root it too. Or you can even take a chance if youre brave and use a one click root based on the android version you have.
@ghi07 - All this method does is re-install the OS (which is Gingerbread to answer your question) with market and superuser.
@dalerious - I'm sorry but I don't have a Nextbook anymore but if I did I would definitely try my best to help you. Try doing the entire process over and see if that works. Good luck!
Click to expand...
Click to collapse
I have already been to this website and successfully added the market to my Next7. I do want to root it and flash a custom ROM, but I have not found anything useful. Thanks though.

Rooted fine, thx a mil. Installed GOLAUNCHER EX and the icons were too big. Dl'd LCD resolution from market and decreased res from 160 to 140. To apply changes app reboots tablet. When it came back up, nextbook stuck on launch screen and I can't even turn it off!! This was my gf's xmas present from her parents!!! Any suggestions??

eybarra2 said:
Rooted fine, thx a mil. Installed GOLAUNCHER EX and the icons were too big. Dl'd LCD resolution from market and decreased res from 160 to 140. To apply changes app reboots tablet. When it came back up, nextbook stuck on launch screen and I can't even turn it off!! This was my gf's xmas present from her parents!!! Any suggestions??
Click to expand...
Click to collapse
u can reboot the device by using a paperclip and press in the reset button.
---------- Post added at 10:44 AM ---------- Previous post was at 10:39 AM ----------
Thanks for the detailed guide Sunnyboy167~ Anyway devmonkey just release a newer mod which works better than the previous. Do check it out

hi all,
I rooted my new nextbook8 ...and it works just nice...
just need some help on whether possible to use my iphone as a modem for my nextbook? as i realized it cant detect my wifi network from my iphone. While my colleague 's motorola zoom works fine with my iphone...any solution on this?
Caduser from singapore...

ALL in ONE thread for HUAWEI HONOR u8860 a.k.a GLORY

This thread is opened to troubleshoot the HONOR issues and find ROM links at one post because there is no dedicated thread for this great phone
RESPECT THE DEVELOPER AND XDA THEY WILL RESPECT YOU​
HUAWEI HONOR INTRO
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Model U8860
Platform Android 2.3
Band WCDMA/HSPA+ 900/2100 MHz; GSM 850/900/1800/1900 Transfer Rate HSPA+ DL 14Mbps/UL 5.76Mbps
CPU 1.4GHz
Weight 135g
DisplaySize 4.0 inch
Resolution FWVGA( 854x480 pixels)
Camera 8Mega-pixels AF HD camera & 0.3Mega-pixels camera
Memory 512M RAM+ 4G ROM
Extended Up to 32GB micro SD
USB Micro USB 2.0
Wi-Fi 802.11b / 802.11g / 802.11n
Bluetooth Bluetooth 2.1 / Bluetooth stereo (A2DP)
AGPSSensors Accelerometer sensor Proximity sensor Ambient light sensor Gyro Compass Battery*Capacity 1900mAH
VIDEOS
"http://www.youtube.com/watch?v=PAIz7_-Wj1E"
ROMS LINKS​There are CUSTOM' ROM! USE AT YOUR OWN RISK!!!​
OFFICIAL ROMS
ICS V4.0.3
http://www.huaweidevice.com/tcpsdownload/downLoadCenter?category=&flay=software&downloadID=NDUwOTg=
GB V2.3.6 OLD(since the the file is not available in Huawei website download in MF)
http://www.mediafire.com/download.php?knktzjxik9y5aot
http://www.mediafire.com/download.php?8u2fjh32ralmcrl
http://www.mediafire.com/download.php?ogb52kgtaj71jdt
GB V2.3.6 updated
http://www.huaweidevice.com/tcpsdownload/downLoadCenter?category=&flay=software&downloadID=NDY2NTM=
UNOFFICIAL ROMS
MIUI OFFICIAL CHINA based on V4.0.3
Language Support : ENGLISH/CHINA
"http://bigota.d.miui.com/2.6.29/miui_Honor_2.6.29_8a66d3c1f1_4.0.zip"
MIUI UNOFFICIAL US based on V4.0.3
Language Support : ENGLISH
"http://roms.miui.us/2.7.6/MIUI.us_Honor_v4_2.7.6_Eng_Deo_ZipA_Signed.zip"
SHENDU OFFICIAL V1.0 based on 2.3.7
"http://download.shendu.com/downloads/shenduos/u8860/ShenDu-u8860-v1.0RC-120708.zip"
DEVELOPERS ROMS
MIUI by doc3000 based on 2.3
http://forum.xda-developers.com/showthread.php?t=1596442
CM7 by geno
1, using the latest CM7 source compiler, Chinese missing part finished by the individual, the translation of less than forgive
2, using self-compiled kernel, a number of optimization, turn on more features, the default overclocking (1.4G), can be overclocked to 1.9G
3, adding a personal enhanced script
4, all functions are normal, the FM does not work, front camera upside down (can be placed horizontally normal video)
5, by adding the RE Manager, ING market (do not like to handle)
6, google the addon, add the AGPS server (commonly known as GPS acceleration)
"http://dl.dbank.com/c09vwre63u"
ICS ROM REDUCED-V-4.0.3
This ROM is based on Huawei's official 4.0.3 production, add ROOT permissions, RE File Manager.
ROM does not do the depth changes, but in streamlining procedures.
1, ROM version of the Android ICS 4.0.3;
2, delete the Huawei comes with a lot of applications, leaving only the Huawei input method;
3, comes with the Google calendar, contacts, update plugins;
4, the desktop Google native desktop programs;
5, support the Root;
6 the update RootExplorer to the latest version;
7, add the application market;
8, remove the extra language files;
9, streamline off the excess in other countries TTS voice files;
"http://dl.dbank.com/c0qt17lblh"
U8860 ROM by Geno V3based on 2.3.6
A substantially streamlined, joined boot optimization script
(2) open the HDR camera, Task Manager, use habits
3 Huawei desktop overall official interface can modify the
4 The kernel is the default super-1G, the stand-down back 245m
Off by default keyboard light, you can delete boot script to restore
6.fps not unlock the machine looking for the glory of the final version of the post in July to see how to unlock
Not integrated input method
8.Email does not recommend removing, or point to add new accounts will restart stuck
Support the dual system (not to say that this brush becomes a dual system, you must first have a dual system partition, and then brush this will automatically identify the current partition)
Brushing machine to restart the browser HD support me click on the built-in dolphins can enter the interface do not like to directly deleted.
If you can not, please read the Brush Brush Description:
To the official 2.3 (B522, B518) and successfully ROOT, replace recovery5.0.27,
1 will download the zip Brush package do not extract directly into the SDcard
Hold the volume up + power button is turned on, do not release until well into the recovery mode, enter the advanced mode - reboot to recovery
Recovery, the volume up and down keys / menu Home key to move up and down the power button / Search button to confirm the back key to return to the previous menu level.
Select "Clear all data recovery factory
Select from the SD card, select the Brush package "
6 re-election to select the ZIP file from the SD card "
7 to find just download the zip Brush package confirmed
8 confirmed, Brush, wait about 1 minute to complete.
After brushing, back to the first menu, select "immediately reboot the system restart the phone
"http://dl.dbank.com/c0y9yfx5le"
U8860 ROM by Bones V1 1.4 based on 2.3.6
ROM size: 81.78MB
Android version: 2.3.6
UI type: Android native
Suitable for models: Huawei U8860
Update date :2012-02-23
"http://dl.dbank.com/c06a9zaty3"
INSTALLATION​ HOW TO INSTALL OFFICIAL/STOCK ROM
find the PDF attachment below for step by step procedures
HOW TO ROOT OFFICIAL/STOCK ROM
1. Download the file in the attachment (UPDATE.RAR)
2. Extract u get (update.app)--> Create a folder in SDcard by name "dload" copy update.app in the folder
3. go to Settings --> SDCARD --> SOFTWARE UPDATE --> UPDATE then restart
4. Download SuperOneClick.rar --> extract (below link)
5. start SuperOneClick.exe --> connect the phone to pc via USB cable
6. Click root -- > DONE ENJOY ur device is rooted
http://www.mediafire.com/?8a921g3bvq4uxp9
HOW TO INSTALL CWM V5
1. Download "recovery.img" form attachment
2. Install "Romtoolbox" free version form google market (need root to run)
3. Open the app --> Go to Rootbrowser --> find ".cust_backup" folder --> open "image" folder
4. Rename "recovery.img" to "recovery_backup.img"
5. Copy the downloaded version of "recover.img" and paste in "image" folder (step3)
6. Exit the app --> Switch Off
7. Press "power on" button while holding "volume up"
done u got cwm V5 enjoy
IF U FIND THIS POST HELPFUL CLICK THANKS AND VOTE OR U CAN ALSO DONATE
MORE TO COME ON TROUBLE SHOOTING WILL UPDATE THIS POST FREQUENTLY​

i think there is one similar thread here : http://forum.xda-developers.com/showthread.php?t=1552038

how are the roms made by geno and bones wich one are better?

tropblaster said:
how are the roms made by geno and bones wich one are better?
Click to expand...
Click to collapse
still i am testing will edit the post soon for update,

tri_zet said:
i think there is one similar thread here : http://forum.xda-developers.com/showthread.php?t=1552038
Click to expand...
Click to collapse
Yes and there is already a wealth of information over there. I recommend this thread should be closed instead of having multiple threads acting as a main thread.

trekker99 said:
Yes and there is already a wealth of information over there. I recommend this thread should be closed instead of having multiple threads acting as a main thread.
Click to expand...
Click to collapse
hi everybody, unfortunately i've tried to install CWM5 reading information in this thread but my phone when start up give me image error and dont start.
i have used information point on point but brick my phone, please help me.
thank you

Always "Update failed"
I've tried all the different UPDATE.APP versions. And every one of them starts to unpack, and then, just as it's about to start installing,
I get a yellow warning triangle and an "Update failed" message.
Anyone experienced the same or know what to do with this?
I'd like to root the current 2.3.6 or upgrade to ICS or something, but everything just fails
The phone is totally stock from manufacturer, I haven't flashed or done anything.
System information:
Android version: 2.3.6
Build number: U8860V100R001EURC00B875
Kernel:2.6.35.7-perf, [email protected]#1
Any hints or help will be greatly appreciated!

giovandry said:
hi everybody, unfortunately i've tried to install CWM5 reading information in this thread but my phone when start up give me image error and dont start.
i have used information point on point but brick my phone, please help me.
thank you
Click to expand...
Click to collapse
download stock rom, take out the sd card connect to pc through some card reader create dload folder extract the downloaded stock rom in the dload folder put back the sdcard, start your phone while holding up & down volume button

mlysgaard said:
I've tried all the different UPDATE.APP versions. And every one of them starts to unpack, and then, just as it's about to start installing,
I get a yellow warning triangle and an "Update failed" message.
Anyone experienced the same or know what to do with this?
I'd like to root the current 2.3.6 or upgrade to ICS or something, but everything just fails
The phone is totally stock from manufacturer, I haven't flashed or done anything.
System information:
Android version: 2.3.6
Build number: U8860V100R001EURC00B875
Kernel:2.6.35.7-perf, [email protected]#1
Any hints or help will be greatly appreciated!
Click to expand...
Click to collapse
download stock rom B866 then install and try to root stock rom 2.3.6 or just normally install ics

trekker99 said:
Yes and there is already a wealth of information over there. I recommend this thread should be closed instead of having multiple threads acting as a main thread.
Click to expand...
Click to collapse
if u want to close your most welcome

I'm having issues :/ I can't seem to get my old number off my phone :/ I live in the middle of no where and I can't get my old phone number off my phone. Ideas?
Sent from my Inspire 4G using xda premium

Does the custom recovery.img (in the attachements' section) work for ICS ??
The answer is just yes or no.
THANK YOU!

Please update this thread with newer roms
[email protected] Mod V2 [clear edition]
4.2.2 [ROM+KERNEL 3.0.87][LINARO] SLIMBEAN 8.0 | SALUT HALO! (MAJ)

greatkhali123 said:
HOW TO INSTALL CWM V5
1. Download "recovery.img" form attachment
2. Install "Romtoolbox" free version form google market (need root to run)
3. Open the app --> Go to Rootbrowser --> find ".cust_backup" folder --> open "image" folder
4. Rename "recovery.img" to "recovery_backup.img"
5. Copy the downloaded version of "recover.img" and paste in "image" folder (step3)
6. Exit the app --> Switch Off
7. Press "power on" button while holding "volume up"
done u got cwm V5 enjoy
Click to expand...
Click to collapse
Hi, i manage to change my recovery with this method but do it with TWRP 2.7.1.0, when i reboot i have this message :
Image signature verify fail!
Your boot/recovery image may have an incorrect signature.
Please update your image to a signature official one.
You can remove battery for power down.​
Click to expand...
Click to collapse
i remove the battery put in place and push "Volume - Volume + Power" to have the purple screen but the directory doesn't mount.
I have a backup of original file (amss.mbm, boot.img, cust.img, EMMCBOOT.MBM, recovery.img) but i can't find a way to push into the phone with ADB command or with standard way.
I also try to push the dload directory of different version of official ROM (B866, B926, B924, B927, B919, B932) to an MicroSD card but it always end with an error at Step 2/2 (install) with this message :
Firmware update
Step 2/2
Install
Update failed​
Click to expand...
Click to collapse
when i check my MicroSD card i have a new file in the dload directory called sd_update.log with this text inside :
Failure: OSBL°æ±¾Æ¥Åäʧ°Ü.
dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!
Click to expand...
Click to collapse
I search a long time to find a solution for this but don't find anything.
If somebody have a solution for this i really apreciate your help.

Links removed!
Killerdog said:
Hi, i manage to change my recovery with this method but do it with TWRP 2.7.1.0, when i reboot i have this message :
i remove the battery put in place and push "Volume - Volume + Power" to have the purple screen but the directory doesn't mount.
I have a backup of original file (amss.mbm, boot.img, cust.img, EMMCBOOT.MBM, recovery.img) but i can't find a way to push into the phone with ADB command or with standard way.
I also try to push the dload directory of different version of official ROM (B866, B926, B924, B927, B919, B932) to an MicroSD card but it always end with an error at Step 2/2 (install) with this message :
when i check my MicroSD card i have a new file in the dload directory called sd_update.log with this text inside :
I search a long time to find a solution for this but don't find anything.
If somebody have a solution for this i really apreciate your help.
Click to expand...
Click to collapse
i have the same problem with same result but now i'm looking for latest official firmware
i hear from someone if you have cwm you will be fine case you can reflash rom with it
links expired! hope to find new links.

The GooApple V5+ - Information thread

GooApple V5+ : iPhone 4/4S Replica
Everything you need to know about it !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
____________________
UPDATE : ADDED CMWR 6.0.2.7
____________________
Review Videos
GooApple V5+ Review by AndroidSale
Official GooApple V5+ review
http://v.youku.com/v_show/id_XNDc1MzAwMTIw.html
____________________
Specifications
System
Model: GooApple V5+
Processor: MTK MT6575, 1Ghz - ARMv7
Operating System: Android 2.3.6
Kernel: Linux v2.6.357 ([email protected]) (gcc version 4.4.3 (GCC) )
Ports: 3.5mm Earphone Jack and mini USB
Launcher: iLauncher modified
Partition: MTD
Display
Resolution: 960x640 pixels
Density: 1920x1280
DPI: 320.0
Screen size: 3.5"
Color support: 16 million colors
Functions: Touchscreen, Multi-Touch, Retina
Camera
Front Camera: 1.3 MP
Back Camera: 8 MP
Functions: Flashlight, Zoom, Auto Focus, Scene mode, ISO adjustment, Time Face Detection
Connectivity
Carrier: Unlocked
Network band: GSM 2G: 850/900/1800/1900 MHz and WCDMA 3G: 2100MHz
Data: GPRS, EDGE, HSPA
Message: SMS, MMS, Email
Bluetooth: Bluetooth 2.0
WLan: Wi-Fi IEEE 802.11 b/g/a
USB: USB 2.0
GPS: GPS, built-in GPS chipset (EPO and AGPS)
SIM: Micro SIM card (Single)
Phone Book: More than 10000 contacts
Browser: HTML, Safari
Battery
Type: Built-in Li-on battery ; 1050mAh
Standby Time: 120-150 hours
Talking Time: 3-4 hours
Memory
Built-in Memory : 512 MB
External Memory : 8GB/16GB/32GB (optional : SDcard)
RAM: 512 MB
Phone Model
Replica: 1x1 iPhone 4/4S replica
Dimensions: 115h - 58.6w - 9.3d (mm)
Weight: 135g
Other Features
Button: Mute Button just like iPhone
Video Player: AVI, MP4, 3GP, MOV, MKV, FLV
Audio Player: MP3, FLAC, APE, OGG, AMR, AAC, WAV, AWB
Images: JPG, PNG, BMP, GIF
E-book Format: TXT, CHM, DOC, HTML
Ring Tones: Original iPhone 4 ringtones
Play Store: Google Play Store
Radio: FM Radio
Sensors: Gravity Sensor, Proximity Sensor, Lichtsensor, Accelerator Sensor
Recovery: Stock recovery is E3
Languages
English, French, German, Spanish, Portuguese, Russian, Arabic, Indonesian, Italian, Malaysian, Turkish, Vietnamese, Thai, Chinese
Accesories
1x GooApple V5+ Phone
1x Travel Charger
1x USB Data Cable (I suggest buying a new one)
1x Headphone (if plugged in, both the phone & headphone give sound)
1x Screen Protector (optional)
1x iPhone Skin Case (optional)
- ALL ORIGINAL IPHONE 4/4S CASES, RECHARGERS, HOLDERS, ... ARE COMPATIBLE
____________________
How to Root
This was a hard & long trial to get this phone rooted. Though, it's a very simple way found by me and yuweng, thanks bro!
Based on yuweng's tutorial : MT6577 CWMR Root Updated V2[/b]
Download these and follow the tutorial:
ADB.zip - http://www.mediafire.com/?11cbu388oqu8amw
All the Drivers I could find - http://www.mediafire.com/?wfr5fgkxkdau6w4
CWMR Recovery's.zip - http://www.mediafire.com/?2r30o428558h22q
MTK Rom Studio 1.1.77.146.zip - http://www.mediafire.com/?h22puc8kac6axv7
SP Flash Tool v2.1134.00.zip - http://www.mediafire.com/?ob5caeigzc1ga10
SP Flash Tool v3.1224.0.sn85.zip - http://www.mediafire.com/?5u29nf4fp4omw9n
Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip - http://www.mediafire.com/?fee3e7cta5mg3fp
- Setting up the folders and phone (to make it easy)
1. Create a folder in C:\ called "GooApple"
2. Extract all the ZIP files EXCEPT "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" to "C:\GooApple\" so you have 6 folders in GooApple.
3. And copy "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" to "C:\GooApple\"
4. I prefer doing a factory reset before doing this.
* Factory reset can be found at Settings > General > Privacy > Factory data reset > Reset phone
5.Now enable Unknown sources, USB debugging and Stay Awake.
* Unknown sources can be found at Settings > Store.
* USB debugging and Stay Awake can be found at Settings > Store > Development.
6. Make sure all drivers are installed properly. Some might install when connecting the USB.
7. Turn off your phone and unplug your USB cable from the phone (Let the USB be in your computer/laptop)
- Backup your own recovery (not required but suggested)
8. Open "Flash_tool.exe" from version "3.1224.0.sn85".
9. Click on File > Open Scatter-loading file, then browse to "C:\GooApple\MTK Rom Studio 1.1.77.146" and open "MT6573_Android_scatter.txt".
10. Click on the Read back tab (top). (If there is anything in the list, please Remove it.)
11. Click on Add and double click on the ROM_1.
12. Now type recovery.img at Filename, then browse to "C:\GooApple\MTK Rom Studio 1.1.77.146\SPFT_UPLOAD" and click Save.
13. In the popup, select
* Type: Hex
* Read Method: Read Page Only
* Start Adress: 0x980000
* Length: 0x00500000
And click Ok
This info can be found when loading the Firmware.info in MTK Rom Studio
14. Click on Read back. Now hold the "Volume -" button and insert the USB in your phone. It should say OK at the end.
Now you have a backup of your original recovery.img in case you want to restore it.
- Installing CWM Recovery (REQUIRED FOR ROOTING!!)
14. Go to the CWMR Recovery's folder, then choose if you want the Standard CWM or the Touchscreen CWM and copy the recovery.img included to "C:\GooApple\MTK Rom Studio 1.1.77.146"
* Standard CWM is controlled by Volume up and down. Touchscreen CWM is controlled by both.
15. Open "Flash_tool.exe" from version "2.1134.00".
16. Click on Scatter-loading and browse to "MT6573_Android_scatter.txt" in MTK Rom Studio and open it. (Click OK on the popup)
17. Now make sure everything is unchecked EXCEPT "RECOVERY". (Don't forget that your phone should be turned off and unplugged.)
18. Now click on download and insert your USB cable. It should say OK at the end.
Now you have CWM Recovery installed.
- Rooting the phone
19. Start your phone and connect to USB Storage Mode.
20. Copy "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" to the ROOT of your SDcard. And turn off USB Storage (but keep your USB in)
21. Now boot your phone into recovery mode. There are 2 methods, I prefer method #2 as it's more safe and works most often. (Someone's phone kept vibrating while doing method #1)
* Method #1:
- Shut off your phone (wait untill it vibrates to make sure it's completely off).
- Hold the "Volume +" button and the "Power" button.
- You now are in recovery or your phone keeps vibrating.
* Method #2:
- With your phone on, start "cmd.exe" as administrator on your PC.
- Type "cd C:\GooApple\ADB" (without the "") and press enter.
- Type "adb reboot recovery" (without the "") and press enter again.
- Your phone shall reboot in recovery.
22. In recovery, select "install zip from sdcard", then "choose zip from sdcard" and select "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip". Select "Yes - Install ..."
* Recovery Controls (Standard CWM)
Volume + = UP
Volume - = DOWN
Power = Select
Home = Go to +++++Go Back+++++
23. Once completed, select Go Back, and select wipe data/factory reset.
24. Now select "reboot system now".
And here we go... Your GooApple V5+ is Rooted !
Thanks again yuweng for the support !
____________________
How to Increase Internal Memory - INT2EXT method (ROOT required)
"INT2EXT on MT6575 / 77 for the extreme gamers !" for GooApple V5+ thanks to yuweng !
- NOTE: THE PHONE TENDS TO BE SLOWER AS IT HAS TO LOAD FROM THE SDCARD
Based on yuweng's tutorial : http://www.mediafire.com/view/?7zjz4onhos826bk
Download and/or install and extract these:
MiniTool Partition Wizard (Home edition) - http://www.partitionwizard.com/download.html
INT2EXT-mtd.7z (Includes install-recovery.sh) - http://www.mediafire.com/?16psto1xqw4b0s0
Notepad++ (To edit install-recovery.sh) - http://notepad-plus-plus.org/download/v6.2.3.html
ES File Explorer File Manager - https://play.google.com/store/apps/...sMSwxLDEsImNvbS5lc3Ryb25ncy5hbmRyb2lkLnBvcCJd
BACKUP YOUR GOOAPPLE V5+ WITH CWMR
1. First I installed and opened MiniTool Partition Wizard and mounten my SD card (32gb & Class10) with going in USB Storage Mode.
2. In MiniTool Partition Wizard, I selected my drive and resized it from 29gb to 26gb (FAT32).
3. Then I selected the remaining 2.5-3gb and created a new partition : Primary , Ext4 , 4kb. Don't forget to click Apply at the top left.
4. Then I extracted INT2EXT-mtd.7z and installed Notepad++.
5. With Notepad++ , I opened install-recovery.sh and changed unbind to bind in lines 61, 66, 71 and 98. Then saved it.
6. Now I copied the EDITED install-recovery.sh to the root of my /sdcard/ (Location when you open your phone).
7. Having ES File Explorer File Manager (EFEFM) installed, give it Root acces via the Settings at the bottom (check everything at root settings).
8. Next, select install-recovery.sh in EFEFM and copy it to /system/etc/ and give it full read/write/execute acces.
9. After this is done reboot your phone. For me, after the first boot it just shutted off. So then I had to power it on again and I had 2.6gb internal memory.
Hooooorah ! :good:
Thanks again yuweng for the files, info, tutorials and time !
Proof
____________________
Change BOOT logo to iPhone's Apple
So this will change the boot logo of your GooApple from an Android logo to Apple logo.
The things you need:
The boot images - http://www.mediafire.com/?363hvgcmw46wl6w
ES File Explorer File Manager or Root Explorer
1. Extract the iphoneboot.zip to your /sdcard/ so you have /sdcard/system/logo/...
2. Open the file manager, browse to /sdcard/ and copy the system folder.
3. Next go to the root of your phone and change the permissions to R/W.
4. Now paste the system folder here so it overwrites the system logo files.
5. Reboot your phone and voila, now you have the iphone boot !
____________________
Tips&Info
- Make 3 backups of your phone through CWM Recovery because some might get corrupt.
- Use Titanium Backup Pro or a similar tool to remove unused/chinese system apps.
- The MTK6575 can be compared to the PowerVR processor. So the PowerVR games work on the GooApple V5+.
____________________
Custom Recovery *.img
CWM Recovery v6.0.2.7 - Standard Version (MTD partition)
CWM Recovery v6.0.2.7 - Touchscreen Version (MTD partition)
TWRP Recovery - Touchscreen (MTD partition) : Make sure when doing a backup you choose "External".
____________________
Change BUILD.PROP for more compatibility of Apps&Games
Your phone is being recognized as a Android Alps phone which a lot of apps don't even recognize.
So the best thing you can do is change your "build.prop" a little to increase the compatibility.
For example, yesterday I bought N.O.V.A. 2 which says it's not compatible (but it is).
1. Open Root Explorer or something similar.
2. Go into /system/ folder. Make sure the folder is R/W.
3. Press and hold on build.prop then select "Open in Text Editor".
4. Next, change the following.
- ro.product.model=GT-I9000
- ro.product.brand=samsung
- ro.product.name=GT-I9000
- ro.product.device=GT-I9000
- ro.product.board=GT-I9000
- ro.product.manufacturer=samsung
5. Then go back and it will ask you to save it. Save it.
6. Now reboot your phone and try again with more compatibility !
____________________
Useful Downloads
Android
- ES File Explorer File Manager - Tool to browse your folders and copy/paste/delete - Free
- Older MobileUncle Tools - This version is better for changing the recovery via a tool. (name: m44tools.apk, it also includes the 2 recovery's for this phone) - Free
- MobileUncle Tools - Special tool for MTK Android Devices - Free
- MobileUncle Flashlight - App to switch on/off the flashlight - Free
- Pimp My Rom - Awesome tool which has settings to increase for example your phone's internet speed !
- Explorer (or Root Explorer) - Tool to browse your folders and copy/paste/delete - Free or $
- Titanium Backup (or Pro) - Tool to backup/uninstall apps (also for system apps) - Free or $
Computer
- Xmedia Recode - Tool to convert videos to compatible videos for GooApple V5+ (Use iPhone 4 preset)
CLICK TO BROWSE OFFICIAL ROMS
This is the original ROM that comes with the phone : https://dl.dropbox.com/u/76038325/Gooapple_V5_Plus_ROM_A116A_V1.0_P2MB3_20121110.rar
To check which ROM version you need, dial *#2170#*.
The number didn't work for me but they said it works at the official GooApple site. I used A116_4S to update my phone.
IF YOU FOUND SOMETHING OR JUST WANT TO ASK SOMETHING PLEASE FEEL FREE TO POST BELOW
I really want to thank the following people:
yuweng - Always helping me out with troubles.
bigrammy - Giving me the tip to use an older version for doing a Download in SPFT.
The phone can be bought at Android-Sale.com​

What I wish to do with this phone and might need help for:
ROM (standard and v5+4s_a116_ios_root_12.11.16_Launcher)
- Get GPS to work on my phone. (Still don't know if it's just me or the phone.)
- Change the USB Storage Mode image to something like the iPhone by editing Framework-res.apk.
- Increase Internal memory by taking System's memory.
ROM (v5+4s_a116_ios_root_12.11.16_Launcher only)
- Remove all the chinese icons in "Google Pinyin IME" keyboard and add AZERTY for Belgium and France.
GooApple V5+ Manual
Thanks to "Q" for looking up this valuable information !
How to take a screenshot:
Tap both the "Home"-button and "Power"-button simultaneous. If you have sounds activated, you'll hear a shutter sound.
How to force restart:
Deep at the bottom of the 3.5 headphone jack there is a restart-button. Use a small tool like a bent paperclip or toothpick to reach it.
You can use this restart-button if your phone freezes and can not be restarted using the normal power-button.
THIS IS A LIFESAVER !
Recovery-menu explained:
The Recovery-menu is a boot-menu that can be used to backup, restore, clean cache or change ROMs in your GooApple phone.
This menu can be either in English or Chinese and may vary slightly depending on what type of Recovery came pre-installed on your phone.
You can install a different Recovery-menu on your phone like CMWR / TWPR
To access the Recovery-menu:
- Turn off your phone.
- Press and hold the PLUS-button and POWER-button on your phone until you arrive at the recovery menu.
NOTE: Depending on ROM and Recovery-version, you may actually need to press MINUS-button and POWER-button to access the Recovery-menu
Factory-test-menu:
This can be used to test the hardware functionality of your phone.
To access the Factory-test-menu:
-Turn off your phone.
-Press and hold the PLUS-button and POWER-button on your phone then lose it and hold it again after the vibration.
NOTE: It doesn't always work so you really need the perfect timing.
Navigating the user-interface:
This menu you can close running apps on the background so pretty usefull sometimes.
- Double-tap the "Home"-button shows running/standby apps and possibility to close apps by long-pressing icons in deployed menu.
- Double-tap the "Home"-button at the unlock-screen will show you the music player and a button to quickly acces the camera.
- Hold the "Home"-button to acces Wallpaper and Settings faster.
- Pressing the "+"-button when using the camera will take a picture.
NOTE: Double tapping must have some kind of pace in pressing these 2. If you do it too fast, ut doesn't work.. but too slow, it doesnt work either, so it has to be right.
- "Long-pressing" an icon in the menu makes the icons jiggly so you can change the position of your icons by dragging them to a desired position or on another icon to create a folder.
- "Long-pressing" the MINUS-button can bring up a menu in some applications. - UNCONFIRMED
Trouble hanging up a phone-call?
- Holding the phone vertically during a call turns off the screen (if the light-sensor has been covered).
- Holding the phone horizontally for a few seconds, will turn the screen on again and display the "End call"-button.
NOTE: Make sure you never double-tap the "Home"-button during a call. It will minimize the calling session so you will still be calling in the background. So make sure you always press the "End call"-button.
Change user interface language
If you cleared user data when installing a new ROM, the phone is likely to boot up in Chinese. Follow these steps to change it back to English:
- Press the Settings-button (you can probably identify this by its icon).
- Select the 9th option (General)
- Select the 8th option (International)
- Select the 1st option (Select language)
- Select your language.
NOTE: If you want some influence of your native language, you can install MoreLocale2 from GooglePlayStore. Some apps will be in your native language.
How to change the IMEI-number:
To change the IMEI number, you most likely will have to use MTKdroidTools from MediaFire.com.
It has an option to change the IMEI number but for this, you will need:
- the ADB drivers to be installed.
- A new IMEI number with what you want to change the original one.
- Phone connected to your computer.
How to add more Ring, SMS, Notification - sounds on your GooApple:
- Connect the phone to a computer in USB Storage Mode.
- Create the following folders on your SD-card:
- Ringtones
- Alarms
- Notifications
- Move your own sounds into the appropriate folder.
- Adjust the sounds-settings on your phone here:
- Ring-tone: Settings>Audo profiles>General>Voice call ringtone
- SMS-tone: Settings>Auido profiles>General>Notification ringtone
- Alarm-tone: Enter your Clock-app and add a new alarm and you should be presented with ringtone-options.
How to remove the backcover and change the MicroSD:
You might want to remove the backcover to change the MicroSD card or maybe even to change the cover.
To remove the cover:
- Unscrew the 2 screws at the bottom of your phone. You need a special screwdriver for this.
- Slide the back cover up once the screws are removed.
To change the MicroSD:
- Having the cover removed, you will see the SD card to the left of the battery trapped in some aluminium cover.
- Slide the aluminium cover to the left and now you can remove the SD card.
To put the cover back on:
- Put the cover back in its place, then drag it down (instead of up to remove it).
- Put the 2 screws back

Thanks mate! Very helpfull

AShacks said:
Thanks mate! Very helpfull
Click to expand...
Click to collapse
No problem !
And can anyone with a GooApple V5+ please try this to fix the GPS signal?
1. Charge your phone completely (100%)
2. Download and install Mobileuncle MTK Tools from Google Play.
3. Go to Settings > Location Services and turn off everything here. Also turn off WiFi.
4. Now turn off your phone. Then turn it back on and enable WiFi.
5. At Settings > Location Services
- Enable : Use wireless networks.
- Enable : Use GPS satellites
- Enable : GPS EPO assistance -> Go into EPO Settings and check the EPO file info if it's downloaded, if not, make sure you're connected to the internet and uncheck/recheck Auto Download.
- Enable : A-GPS
6. Open Start Mobileuncle MTK Tools and go to Information and click on Full , then Cold and go back to Satellites.
7. Go outside/window/balcony and after a while, the red dots should become green.
Source: peterssson
They say it works for MTK 657x models but it doesn't work for me. I keep getting red dots instead of green.

Drivers
Hi,
My Gooapple V5+ arrived.
I'm quite lost since no manual inside and this is my first android.
Regarding the rooting issue, I first decided install drivers. As I read, the process is connecting USB to PC and wait for Windows to ask something and then navigate to MT6575 USB VCOM drivers forder.
However, Win7 recognized V5+ as an Android device and installed some drivers, including "My HTC" (?)(!)
Now I can access SD card and maybe something else (I have no idea what) but I can't connect to internet through USB
The big quiestion now for me, in order to root the phone, is how to install drivers properly, bcos we have:
drivers preloader MT65xx
Android ADB Interface
MT6575 USB VCOM drivers
usb_driver
usb_driver_MT65xx_Android_ZTE_v821
I have a Win7 x64 laptop
About the GPS, I have just attempt fix my possition with "MAPS", but despite I downloaded some file, I can't fix possition bcos I'm indoors now.
Thanks for any comments

I'm not sure how the USB thetering works but I'll look into it.
About the drivers. I do it like this: plug it in, then choose the DRIVERS folder and let it choose automaticly.
Android device is correct, but I haven't seen the HTC one though, I'd recommend uninstalling that one.
But really , it can do a lot if you just plug it in, let it search the driver automaticly (don't select any specific folder, just DRIVERS if you really need to).
Also the VCOM driver is more for when you're about to flash your recovery through SPFT which it will install automaticly.
If you need any "personal" help on rooting it, feel free to ask, I'll support you via skype/facebook/teamviewer.
And I too am using Win7 64bit

It seems that Win7 installs a Google pack of USB drivers when detects Android devices.
Maybe this one I found:
softpedia.com/get/MOBILES/Google/Google-USB-Driver-Revision4.
And bcos GooApple is not in the list, Win7 chooses HTC that has 6575 chip aswell.
I will try to uninstall "My HTC" but Windows prefer this to any in the DRIVERS folder, perhaps is more up-to-date.
Any way, automatic driver download/installing maybe problematic with this phone.
Thanks a lot for support. I will need some days to become familiar with the phone before the next level

Thank you, is a very useful guide ! :good:

"Q" said:
It seems that Win7 installs a Google pack of USB drivers when detects Android devices.
Maybe this one I found:
softpedia.com/get/MOBILES/Google/Google-USB-Driver-Revision4.
And bcos GooApple is not in the list, Win7 chooses HTC that has 6575 chip aswell.
I will try to uninstall "My HTC" but Windows prefer this to any in the DRIVERS folder, perhaps is more up-to-date.
Any way, automatic driver download/installing maybe problematic with this phone.
Thanks a lot for support. I will need some days to become familiar with the phone before the next level
Click to expand...
Click to collapse
Ehm it shouldn't say GooApple V5+ in device manager.
For me it says Android Phone > Android ADB Interface and when I turn on USB storage, I just get Portable Devices: G:\.
So yeah, strange it uses HTC. And sorry that I cannot explain properly how to install the drivers because I just installed a few drivers , uninstalled some and installed some other and it worked.
But the most important thing is that the VCOM driver is installed. Which will automaticly install once you try the *Read Back* method. OR this might work too:
Turn off your phone. Plugin the USB cable in your computer but not in the phone (yet).
Now hold the Volume + button and then insert the USB cable into your phone. I think now, it should install the VCOM drivers automaticly.
And no problem Anhuc ! I haven't had time to test some things as I'm in a period of getting a job for the rest of my life

Drivers Problem Fixed!!
Well, for some reason my V5+ only accept VCOM driver if press "+" when plug-in USB in phone OFF, as you suggested.
If connect USB to PC with phone "ON" it ONLY accepts Android ADB Composite Interface, as you said.
So thanks everybody for suggestions and comments. I thing the first challenge overcome :good:
PS:
About the HTC driver I had first, maybe it was bcos I had MOBILE-EDIT software, wich installs many drivers, so I had to remove it from ControlPanel/Pograms/Unistall
But after it, connected phone to PC and it installed automatically "My HTC" driver again
So removed driver from DeviceManager and also removed Google Android USB Package from PC execiting "pnputil.exe -e" in command prompt, to see the OEM# of package, then removed with "pnputil.exe -d Oem#.inf"
Seems extrange but works great. (see details here: technet.microsoft.com/en-us/library/cc730875.aspx)
I have taken some screen shots of this in case someone need.
Hope may help people with persistent drivers....

"Q" said:
Drivers Problem Fixed!!
Click to expand...
Click to collapse
Good to hear that Q and thanks for sharing the information on what was causing it !
It can always help someone else out who has the same issue.
Anyways, I guess you can get to the part of flashing the phone with CMWR right?
I suggest jus reading the first part of the Rooting untill installing CMW and start there as thats the basic thing you need to do as the files I uploaded already include the patched recovery.img.
To see some pictures, check this out : http://www.mediafire.com/view/?8mxvy0ey5yfdu59 page 16 thats basicly how to Download recovery.img to your phone. But always follow my tutorial or ask me to do it for you

GPS without signal
Yes, I downloaded averything from v5+ tutorial and carefully read and understood this excellent work.
However, manage GPS to work is my priority now.
Is there any light in the dark?
I tried and tried, downloaded EPO files, used MTK Tools and even installed an iGo My Way version compatible with Retina screen.
One hour in the field and only saw a little signal bar of one satellite (if it was a satellite) but no points (red or green) at all in MTK Tools.
Have someone seen at least a single pretty point in the grid?
Thanks for any help.

"Q" said:
Yes, I downloaded averything from v5+ tutorial and carefully read and understood this excellent work.
However, manage GPS to work is my priority now.
Is there any light in the dark?
I tried and tried, downloaded EPO files, used MTK Tools and even installed an iGo My Way version compatible with Retina screen.
One hour in the field and only saw a little signal bar of one satellite (if it was a satellite) but no points (red or green) at all in MTK Tools.
Have someone seen at least a single pretty point in the grid?
Thanks for any help.
Click to expand...
Click to collapse
Ooh thanks for helping out.
I do get red dots yeah but they don't turn green :/
Things you could try is
Download GPS Status & Toolbox : Launch GPS Status & Toolbox. You'll see a compass and some other stats. Hit the menu button for more options.
Make sure you have an active data connection and go to "Manage A-GPS State". Then, tap the "Download" button in the menu that pops up. When it's done, exit the app.
And another thing that made me come closer was changing the gps.conf but I dont remember what tool to use. You can do it manually though. (It's located in system/etc)
For Belgium
NTP_SERVER=be.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
# DEBUG LEVELS:
# 0 - none, 1 - Error,
# 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
DEBUG_LEVEL =0
ACCURACY_THRES=5
INTERMEDIATE_POS=0
ENABLE_WIPER=1
SUPL_HOST=supl.google.com
SUPL_PORT=7276
REPORT_POSITION_USE_SUPL_REFLOC=1
# blank
Click to expand...
Click to collapse

bOyka8 said:
Ooh thanks for helping out.
I do get red dots yeah but they don't turn green :/
Things you could try is
Download GPS Status & Toolbox : Launch GPS Status & Toolbox. You'll see a compass and some other stats. Hit the menu button for more options.
Make sure you have an active data connection and go to "Manage A-GPS State". Then, tap the "Download" button in the menu that pops up. When it's done, exit the app.
And another thing that made me come closer was changing the gps.conf but I dont remember what tool to use. You can do it manually though. (It's located in system/etc)
For Belgium
Click to expand...
Click to collapse
Okay!
At least I have the dots in grid.
8 satellites in red but no singnal bars :/ after 30 min with all assistance enabled and filter off.
It's very strange, all my GPSs (I have 4 more devices) can get possition from cold in less than 20 min,
Some firmware issue here, I pressume.
I will contunue with this...

bOyka8 said:
Anyways, I guess you can get to the part of flashing the phone with CMWR right?
I suggest jus reading the first part of the Rooting untill installing CMW and start there as thats the basic thing you need to do as the files I uploaded already include the patched recovery.img.
To see some pictures, check this out : http://www.mediafire.com/view/?8mxvy0ey5yfdu59 page 16 thats basicly how to Download recovery.img to your phone. But always follow my tutorial or ask me to do it for you
Click to expand...
Click to collapse
Ok, I need the V5+ rooted to get access to system/etc....
After reading e/t in tutorial, just a stupid question: " I will loose all changes after flashing, and will need to begin again with configurations?"
I think I know the answer

"Q" said:
Ok, I need the V5+ rooted to get access to system/etc....
After reading e/t in tutorial, just a stupid question: " I will loose all changes after flashing, and will need to begin again with configurations?"
I think I know the answer
Click to expand...
Click to collapse
I don't think so, you can still do it without losing everything.
Just flash the recovery.img, then install the rooting zip and you're good to go !
And if you need help rooting this baby, I can do it for you in 2 hours from now

bOyka8 said:
I don't think so, you can still do it without losing everything.
Just flash the recovery.img, then install the rooting zip and you're good to go !
And if you need help rooting this baby, I can do it for you in 2 hours from now
Click to expand...
Click to collapse
I managed to do a recovery.img of my last configuration.
All ok, except that phone hangs after the OK green circle on PC screen.
Non responding at all, all black.
But reset from 3.5mm jack and all ok again.
Will do another backup from factory setings, just in case...
what happens after installing CWM Recovery?
can work as normal with phone?
Thanks for 2h supporting

problem!!
bOyka8 said:
I don't think so, you can still do it without losing everything.
Just flash the recovery.img, then install the rooting zip and you're good to go !
And if you need help rooting this baby, I can do it for you in 2 hours from now
Click to expand...
Click to collapse
Well, something bad happened.
Afetr the backup opperation tha finished OK, it has a wrong behaviour with battery icon.
Sometimes show the pugged icon and others a ray inside.
When turn off, it finish ok and then vibrates, but a few seconds later the battery icon charging fills the scren (unplugged of course) and few seconds later disappears.
Not a big problem, but after it I tried a second backup after factory settings restore and this time when plug USB on phone while pressing "-" nothing happens. PC do nothing (not installing drivers as before) and flash_tool can't finish the last part of procedure.
I even used differnt cable but nothing. USB parameters are as suggested....
Please help!
Thanks

"Q" said:
Well, something bad happened.
Afetr the backup opperation tha finished OK, it has a wrong behaviour with battery icon.
Sometimes show the pugged icon and others a ray inside.
When turn off, it finish ok and then vibrates, but a few seconds later the battery icon charging fills the scren (unplugged of course) and few seconds later disappears.
Not a big problem, but after it I tried a second backup after factory settings restore and this time when plug USB on phone while pressing "-" nothing happens. PC do nothing (not installing drivers as before) and flash_tool can't finish the last part of procedure.
I even used differnt cable but nothing. USB parameters are as suggested....
Please help!
Thanks
Click to expand...
Click to collapse
Are you using the correct version of SPFT?
For read back you need the v3... (use -) for download you need v2.... (dont use -)
And yeah with this recovery, and root everything works the same !

fixed
bOyka8 said:
Are you using the correct version of SPFT?
For read back you need the v3... for download you need v2....
And yeah with this recovery, and root everything works the same !
Click to expand...
Click to collapse
Fixed!!
Nothing worked to make it responding to USB...
Cables ok, config of USB ok too....
Decided opening phone and release power from battery cables.
I have never did it before but succeed on it
Now repeated opperation and made a successful backup in factory settings
Again I had to reset from 3.5mm jack
All ok, no problems (perhaps battery icon, but not sure)
Will continue rooting later

BlueBerry NetCat M-12 FirmWare Development

Dear open developers community I managet to fully root BlueBerry NetCat M-12 Tablet PC (a.k.a rebranded Cube H30GT) using "remount" exploit, here is my contribute:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
REQUIREMENTS:
* Android SDK with ADB (guess you have this, if not, main files are included in permaroot.zip attached below)
* RockChip RK3066 USB Driver (see attachments below)
* Root/UnRoot script (thanks to Bin4ry from this thread, see attachments below)
* Micro USB Cable to connect Tablet and Windows Desktop PC (Linux is unsupported for now due to manufacturer limited driver distribution)
WARNINGS
1. Using this tutorial will make firmware/software changes on your device(s) but I am not responsible for any damage it could cause.
2. Following steps below will probably VOID YOUR WARRANTY. Read carefully your reseller warranty terms and conditions, and make your decision. It is all up to you.
3. I am not obligated to respond to future questions and/or support, it is my time and good will. If you must, ask here in this thread, there is no need to send me private messages to me because i wont read them at all.
4. You will spot that i dont recommend making any nand backups in this howto - is because I am not aware of any working method for backup M-12. I onlu can imagine dumping whole partition images to your EXTERNAL_SD and flashing back through bootloader but I did not tested that for now.
#GET ROOT
STEP-BY-STEP HOWTO
1. On your tablet PC go Settings -> Developer Options -> Turn on USB Debugging
2. Now You need to manage your Android Debug Bridge recognize your Tablet PC. You can check if it already works by typing this command in command prompt (in ADB folder, or wherever if you extracted adb into windows/system32)
Code:
adb devices
It should give you list of attached devices (something like this: 0123456789ABCDEF device) you should recognize your device if is connected. From my experiences it wont work the way manufacturer described, therefore you need to install patched RK3066 SoC driver you downloaded (this post below). To do so you must right click on My Computer -> Manage -> Device Manager, find your Unknown Device and install driver manually by selecting search folder manually, where you extracted RK3066_ADB_PATCHED.rar content respectively to your OS version (use correct 32-bit or 64-bit driver). Reboot your PC, go to device manager to check if Android Debug Bridge is there:
And You can repeat "adb devices" once again in adb to verify:
3. Now is time to obtain temporary root. To do so, simply navigate command prompt to wherever You extracted adb.exe and type following command:
Code:
adb remount
It uses common JB exploit, which exists in BlueBerry NetCat M-12, alowing you to get temporary root access via ADB shell until next reboot. You can stop at this point and push any system file You want (ie /system/etc/hosts) and set permissions. But if you want permanently rooted device, you need to push SuperSU.apk, su, busybox,... manually via adb before next reboot. Lucky for you, there is a script (permaroot.zip thanks to Bin4ry) which can do it all automatic with just few clicks. Download it from attachment below, extract somewhere on your hard drive run permaroot.bat and have fun.
Comming soon...
++ Flashing through Bootloader (via RockChip Batch Tools) HowTo ++
++ Illustrated Hardware disassembly guide ++
++ There is one custom ROM ported for another device and tested by me, which works in M-12 like a charm. It is purified JB ROM, rooted and without bloatware. I will post it ASAP ++
++ If i be able to obtain original Blueberry firmware dump, i will make CWM Touch based recovery image. Any interested owner of original BlueBerry NetCat should supply me with F/W dump, so if you are one, PM me please ++
++ If I be able to make Cube CWM Touch recovery work I will share (I managed to extract and install it from supersport900 ROM but it wont mount partitions for some reason) ++

BlueBerry NetCat M-12 Disassembly Guide
+++ BlueBerry NetCat M-12 HardWare Assembly +++
Tools needed:
1 x 1mm Torx Screwdriver (pictured below)
2 x sharp plastic departer for simultaneous two-side gently disassembling plastic parts (any Credit Card or guitar pick will do)
Step-by-Step Guide for servicing (H/W repairs, forced bootloader, etc) your BlueBerry NetCat M-12:
* Torx screws are located along port side, noted the difference on Torx and Cross screw types between some devices - Picture 5
* Some BlueBerry NetCats M-12 dont have left speaker - Pictures 20, 25 and 26
* BlueBerry NetCat M-12 has different stamp (OEM Logo) on backside - Picture 14
** Note LED and short circuit testpoint locations for forced bootloader mode which will be described later in more details - Pictures 25-32
Picture 1:
Picture 2:
Picture 3:
Picture 4:
Picture 5:
Picture 6:
Picture 7:
Picture 8:
Picture 9:
Picture 10:
Picture 11:
Picture 12:
Picture 13:
Picture 14:
Picture 15:
Picture 16:
Picture 17:
Picture 18:
Picture 19:
Picture 20:
Picture 21:
Picture 22:
Picture 23:
Picture 24:
Picture 25:
Picture 26:
Picture 27:
Picture 28:
Picture 29:
Picture 30:
Picture 31:
Picture 32:
Picture 33:
There is a PDF with all images in attached archive.

+++ClockWorkMod based recovery image for BlueBerry NetCat M-12+++
CWM Touch 6.0.2.7 (Thanks to Typhoon.X)
CWM Touch is Direct-Touch-Input CWM Recovery image: you can use touch gestures to navigate through menus, but I still prefer old-fashioned way of navigating through menus by using Volume +/- for <UP> and <DOWN>, and Power button as <CONFIRM> which is also available on our devices.
WARNINGS
1. Using this tutorial will make firmware/software changes on your device(s) but I am not responsible for any damage it could cause.
2. Following steps below will probably VOID YOUR WARRANTY. Read carefully your reseller warranty terms and conditions, and make your decision. It is all up to you.
3. I am not obligated to respond to future questions and/or support, it is my time and good will. If you must, ask here in this thread, there is no need to send me private messages to me because i wont read them at all.
4. You are welcome to make backup(s) before make any change to your device; You can export partition(s) dump or make nandroid backup via CWM based recovery image if you have it allrady installed.
Install:
1. Make sure you have installed RK3066 drivers;
2. Download ClockWorkMod.zip, extract, run RKAndroidTool.exe.
3. Reboot your BlueBerry NetCat M-12 in Flash Mode (turn on device by holding Volume- and Power Button or push "Reboot to Flash Mode" button in RKTool)
4. Push "Flash ROM" button like on image below (all settings are stored in config.cfg so You dont need to change anything):
After procedure is finished (cca 15 seconds), device will be automatically rebooted into CWM Recovery, so it's highly recommended making first nandroid backup.
Usage:
If your device is rooted, you can reboot your device into CWM recovery by typing following commands in terminal emulator:
Code:
su
reboot recovery
Or by using any 3rd party rebooting widget/app, which allows rebooting into recovery.
However, if your device is not-rooted, you can reboot into CWM recovery by typing following commands which exploit temporary root access via Android Debug Bridge (adb.exe on your PC, drivers must be installed):
Code:
adb.exe reboot recovery
or
Code:
adb remount
adb shell
su
reboot recovery
Download CWM Touch based recovery image from Google Drive: ClockWorkMod or attachment below.
Be aware that bootsplash will be changed as you need to replace misc.img, so dont panic if you see Cube logo instead of NetCat.

Hey, CyberianIce, thank you for your contribution for this device, since it's really hard to find anything verified out there, and xda is alwas the safest choice.
I wanted to ask you if you could share the info, or link maybe, to that ported ROM you tested on Blueberry, since I don't wont to brick my device by trying an untested ROM.
Thanks in advance!

I can re-upload from my HDD because I forgot original URL, when I got day off my work.
/CyberianIce via TapaTalk HD

That would be amazing, thank you! And if you could write something about the ROM (when you have free time, of course) just so that I know what I'm installing..

Hi, i wonder how to make a hard reset on this devices, i have tried the normal way, volume(-)(+) + power but nothing is working. Can someone help me? Thanks!!

Hi, CyberianIce, I was wondering if you'll have time soon to upload the ROM, if it's not too much trouble. Thank you!

So far I found this Firmware image working best on NetCat M-12: http://www.rockchipfirmware.com/sites/default/files/cube_u30gt-h_V1.11_TNT_R1.zip
For Flashing use this tool: http://www.rockchipfirmware.com/sites/default/files/RKBatchTool1.5en.zip
(Credits: http://www.rockchipfirmware.com/)
It is great because you can flash it vie Rockchip Batch Tool which means its very useful for debricking. It is 4.1.1 from Cube U30GT-H with all this tweaks:
Brief Description:
-Rooted
-Based on stock rom (2012.12.28)
-App partition is Larger
-Build.prop mod based on SGS II SGH-i777 for improved market
-Added Permission Files for improved market
-Removed Chinese Apps
-framework.jar mod for better gameloft compatibility (Asphalt 7 should now work)
-Added SuperSu, gallery with picasa support, ESfile Explorer, english dictionary fix
-Simplified and pretty boot animation
-Changed Annoying Keyboard Key-press sounds... now they are less annoying (based off Cyanogen sounds)
-Default Background should be changed
-Changed "browser" start page to our Google paid search. Use it (free to use for you) to search the web and you will be helping to support us as we release more free firmware. Can easily change this if you want.
Click to expand...
Click to collapse
Afterwards one can flash CWM based recovery image following tutorial from this post

[ROM][RK3066][U30GT-H]BlueBerry NetCat M12
Based on latest original Cube U30GT-H ROM debranded from BlueBerry NetCat M12
Tested on many CUBE U30GT-H devices
Debloated
Removed China
Custom tuned Kernel for optimum performance and stability (up to 15k points in AnTuTu Benchmark)
Increased /data partition size to 2GB instead of 1GB (reduced internal sdcard partition to 12.5GB instead of 13.5GB)
NetCat BootSplash
Custom android bootanimation.zip
Fully working CWM Recovery 6.0.2.7
HOWTO:
1. Shut down your tablet and start it by holding down Volume + button and insert USB Cable with PC. RK Device will apear, if you have no drivers you can find them in archive.
2. Navigate to RKDevelopTool_v1.35 folder and run RKAndroidTool.exe
3. Click Erase IDB and wait for finish
4. Click Run and wait for finish
5. After procedure is complete, if your tablet don't start automatically in CWM, remove USB and shut down tablet by holding POWER button for 8 seconds (you will hear silent *click* sound from tablet as signal it's off). Now download CWM Base from this XDA post put tablet in download mode (VOL+ and USB CABLE) and flash this recovery (run RKAndroidTool.exe, push Flash ROM button). It is very same recovery from this ROM, but after this flashing is finished, tablet will boot into CWM automatically on it's own.
6. Now install ZIP files from after_install folder via CWM recovery. Format NAND is required if you first time using 2GB Data mod, and int2ext is required for some devices which reported switch between internal and external SD card. You must use an external SD Card for flashing ZIPs and search for files in both internal and external sd card in CWM as you still dont know how CMW see your SD card.
7. Reboot System. All done!
DOWNLOAD
Note: If you are used increase /data to 2GB MOD before, you can just install this firmware via RKAndroidTool. If your /data partition was 1GB before, you may need to install patches from folder after_install via CWM recovery.