Database Info

[Huawei IDEOS U8150] [ROM] based on V100R001C191B822 release

I hold no responsibility to how you use or not use this info and if you brick phone - you do this at your own risk
Mini How To
How to install recovery and custom ROMs
Changelog and Downloads
2011-02-11
IMPORTANT NOTE: I have not tested this ROM as I not own U8150 anymore
FILENAME: U8150V100R001C191B822_021211_094422.zip
MD5: 110c084c71729aca1ea8361dcb5fe5f5
* Reverted back to Launcher2
* Added Apps2SD
* Add couple apps I think is useful: wifi analyzer, android terminal, alogcat, cache cleaner-ng. (these can be easily uninstalled)
* Built with latest kitchen 0.120
* Removed Gingerbread keyboard and Google Goggles
2011-01-15
FILENAME: U8150V100R001C191B822_011511_221843.zip / Mirror
MD5: 357e5efb21d3272bb0820c0e14cfe913
* Added Boot Animation - Android Scribble 2.0 no flare
* Added Gingerbread Keyboard - Renamed Gingerbread Keyboard - updated 2010-12-28
* Unlocked Market - thanks xxhp for the package
* Added Google Goggles and AdFree
2011-01-09
This ROM should have overall better performance(hopefully)
Note:
Do a wipe of data and must clear dalvik-cache because of JIT being enabled (under 'wipe' in AmonRA Recovery 1.6.2 ROM)
FILENAME: U8150V100R001C191B822_010911_182214.zip
MD5: d8fae03567ebfa1602a116cc9e5aa587
* Added more ring tones from CM rom
* Ring delay fix
* CDRom symlink fix
* Fixed proximity delay (phone come off of the "black screen" faster)
* Turned Automatic brightness ON
* Now wifi will scan once every 1 minutes when not around a known location.
Help minimize battery drain.
* Added JIT
* Set Setup Wizard to run 'Optional'
2011-01-05 Initial Release
FILENAME: U8150V100R001C191B822_010511_014603.zip
MD5: 059fe7693164b1031a63fce373d57717
* Rooted (Superuser.apk + su)
* BusyBox installed
* /system/framework is deodexed
* /system/app is deodexed
* twitter/facebook/documents2go moved to /data/app
* swapped out Launcher 2 for Zeam Launcher
* Apps like Gmail, Maps, Vending etc updated.
If you like my work please make a donation via the Donate to me button on the left
Enjoy

Thanks for the update quail!
Do you have the AUS version of the Ideos? If so, who'd you get yours from?
Also, can we use this thread as a ROM request? (i.e. overclocking ability, gingerbread development)

Thanks. But can you plz post a guide or give a link on how to install the modified ROM in IDEOS for noobs like me

hachoo said:
Thanks for the update quail!
Do you have the AUS version of the Ideos? If so, who'd you get yours from?
Also, can we use this thread as a ROM request? (i.e. overclocking ability, gingerbread development)
Click to expand...
Click to collapse
Yes I have the AU version and I bought a Crazy Johns pack with 4GB micro HCSD carded included from Aus. Post for 159AUD. I was luck and go one that was not locked to any network.
Yes you can use the thread for ROM requests, I personally will be ignoring requests for OCing, as there is a very nice little app called setCPU which works great on the U8150.

[How to] install recovery and custom ROMs
I hold no responsibility to how you use or not use this info and if you brick phone - you do this at your own risk
Part 1 Installing Recovery ROM
Please refer to this post before flashing Recovery ROM - AmonRA Recovery 1.6.2 and BLUE Screen
The custom recovery allows you to do all sorts of lovely things such as installing ROM update zips (for the forthcoming custom ROMs), wiping various parts of the device, backing up and restoring and much more.
You can enter recovery mode - turn it off, then press the power button while holding the 'volume up' and 'send' (green).
Downloads
AmonRA Recovery 1.6.2 - DOWNLOAD (MediaFire Pro) / MIRROR (CoBlitz / ROMraid) - MD5: 65d4dcbbedb956a9f88dd1981fb31ef8
How to install - Windows, Linux and OSX
Download the recovery image of your choice above and extract the zip file
Put your device in bootloader mode - turn it off, then press the power button while holding the 'Volume Down' and 'End (Red)' keys
WINDOWS - double click 'install-recovery-windows.bat'
MAC - Open a terminal window to the directory containing the files, and type 'chmod +x install-recovery-mac.sh' followed by './install-recovery-mac.sh'
LINUX - Open a terminal window to the directory containing the files, and type 'chmod +x install-recovery-linux.sh' followed by './install-recovery-linux.sh'
Part 2 Installing Custom ROM
Note: When using the Custom Recovery image use the Trackball to move up / down and press to select. Use the volume down button to go back.
Download a Custom ROM of your choice and place the ENTIRE ZIP (Do not extract it) onto the root of your SD card. By "Root" I mean do not place the file in any subfolders
Enter recovery mode - turn it off, then press the power button while holding the 'volume up' and 'send' (green).
From Custom Recover Main menu and select the 'Backup/Restore' option. Choose a 'Nand backup' and let it run it's course
Return to the Custom Recover Main menu and select the 'Wipe' option. Choose the First option 'Wipe data/factory reset' and confirm. <- this is optional after installing one of my ROMs. I personally have not bothered with it with my ROMs
Return to the Custom Recover Main menu and select the 'Flash zip from sdcard'. Select the custom rom you wish to flash, confirm and wait.
Part 3 Restoring back to original ROM
Note: Upgrade operations will erase the user data.
Find and Download ROM from Link provided on WiKi that you want to install
Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the MICRO SD card.
Make sure your handset is power off. Insert the MICRO SD card into the handset. Pressing the END key and VOLUME UP key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
You can see process bar start from 0 on the screen. (this take a few minutes)
Then the handset will restart automatically. Then it is OK.
Reference:
Part 1 info taken from here

quail said:
Yes I have the AU version and I bought a Crazy Johns pack with 4GB micro HCSD carded included from Aus. Post for 159AUD. I was luck and go one that was not locked to any network.
Yes you can use the thread for ROM requests, I personally will be ignoring requests for OCing, as there is a very nice little app called setCPU which works great on the U8150.
Click to expand...
Click to collapse
I got the same deal!
Have you played around with the kernel at all? I'm not experienced in programming etc. but apparantly to OC the IDEOS U8150 more than 600mhz (setcpu does this automatically), it needs a kernel hack like other phones do.

Trekker56 said:
Thanks. But can you plz post a guide or give a link on how to install the modified ROM in IDEOS for noobs like me
Click to expand...
Click to collapse
Sorry I did think to add a how to install recovery/custom ROM how to, well there is one now.
Thanks

hachoo said:
I got the same deal!
Have you played around with the kernel at all? I'm not experienced in programming etc. but apparantly to OC the IDEOS U8150 more than 600mhz (setcpu does this automatically), it needs a kernel hack like other phones do.
Click to expand...
Click to collapse
I have played around with Linux Kernels in the past just not the Android kernel yet... but I am sure it not that hard to patch it and recompile.
I am happy with the 600MHz that setCPU unlocks it too.

quail said:
You can enter recovery mode - turn it off, then press the power button while holding the 'volume up' and 'send' (green).
[*] Put your device in bootloader mode - turn it off, then press the power button while holding the 'Volume Down' and 'End (Red)' keys
Click to expand...
Click to collapse
The Main thinkg about these two parts here, when i enter recovery mode i get a blue screen is that right... nothing BUT a blue screen.
When i try to enter the bootloader mode it stays on the IDEOS logo, the first one when you turn it on...
Also im guessing it has to be plugged into the usb at all times for these.

tankknat said:
The Main thinkg about these two parts here, when i enter recovery mode i get a blue screen is that right... nothing BUT a blue screen.
When i try to enter the bootloader mode it stays on the IDEOS logo, the first one when you turn it on...
Also im guessing it has to be plugged into the usb at all times for these.
Click to expand...
Click to collapse
You should not be getting a blue screen, you sure your using the correct key combination?
Yes you need the USB cable plugged in to use the bootloader. Yes the bootloader is ment to just sit at the IDEOS logo

yeah im 100% sure i used the correct key combo for the restore recovery mode, and sweet as for the bootloader, just wasnt 100% sure on that one.

Thank you OP for the info here, I used them to flash the recovery and I'm going to flash your ROM.
Having a Desire from the very first day I'm not new to these things, but this little boy is in my hands since this afternoon and it's amazing that you came with this just in time.
Will report back in a while with impressions.

OK, here I am. Just attempted to flash the ROM (after a full wipe), but it fails with an "Installation aborted." message just after the ISO symlink one. Looking at the update script, I guess there was a problem while flashing the BOOT partition.
Rebooting into the OS result in the new (rooted) ROM, but something is missing: the build.prop is likely the old one (I still see the old build string) and I have only 118 MB of free NAND space.
Coming from the Vodafone Italy ROM.
Any hint?

@ngel said:
OK, here I am. Just attempted to flash the ROM (after a full wipe), but it fails with an "Installation aborted." message just after the ISO symlink one. Looking at the update script, I guess there was a problem while flashing the BOOT partition.
Rebooting into the OS result in the new (rooted) ROM, but something is missing: the build.prop is likely the old one (I still see the old build string) and I have only 118 MB of free NAND space.
Coming from the Vodafone Italy ROM.
Any hint?
Click to expand...
Click to collapse
What package did you download? I forgot to test one my builds and aborted installation on me, but I have fixed it and already put up a work version. Please try the newer version

quail said:
What package did you download? I forgot to test one my builds and aborted installation on me, but I have fixed it and already put up a work version. Please try the newer version
Click to expand...
Click to collapse
Hi, I flashed "U8150V100R001C191B822_010711_042603", the one I guess is the newest (despite the "2010" typo on the first post ).
Is there a newer one?

@ngel said:
Hi, I flashed "U8150V100R001C191B822_010711_042603", the one I guess is the newest (despite the "2010" typo on the first post ).
Is there a newer one?
Click to expand...
Click to collapse
thanks, fixed the typo.
ATM there is no newer version.

@ngel said:
OK, here I am. Just attempted to flash the ROM (after a full wipe), but it fails with an "Installation aborted." message just after the ISO symlink one. Looking at the update script, I guess there was a problem while flashing the BOOT partition.
Rebooting into the OS result in the new (rooted) ROM, but something is missing: the build.prop is likely the old one (I still see the old build string) and I have only 118 MB of free NAND space.
Coming from the Vodafone Italy ROM.
Any hint?
Click to expand...
Click to collapse
Another thing I am not sure what the diff is between the Italian ROM and the Australian ROM. I wonder if you phone is not fully compatible with the Australian ROM?

ARGH, ok not good...
booted up to flash my loving ideos and i think i killed it...
'Firemware update step 1/2
Unpacking
[=============] (thats a progress bar
!
update failed
and all my buttons are blinking...

First version working
I had the same problems as @ngel using the newer version. Fail with the iso symlink.
Used the first version you posted up and that worked without a problem.
Zeam Launching is really snappy. Or I just haven't bogged down my phone with a whole bunch of crap yet.
Thanks for your work I bought my Ideos through 2 Degrees in New Zealand.
Request:
I quite like the look of the black notification bar and green icons. Would you be able to theme this rom with those? Also could you include the gingerbread keyboard. I know I can install it separately but would be cool to have Touch Pal and the original keyboard removed and replaced with the gingerbread one.

tankknat said:
ARGH, ok not good...
booted up to flash my loving ideos and i think i killed it...
'Firemware update step 1/2
Unpacking
[=============] (thats a progress bar
!
update failed
and all my buttons are blinking...
Click to expand...
Click to collapse
Did you power on your unit holding the 'volume up' and 'red' key?

[GUIDE] :: SuperPad/FlyTouch2/WWE10 Android 2.2 V2.5 #4325 Froyo USB Flashing ::

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This guide is for:
SuperPad / Flytouch2 / WWE10 Tablets
Make sure you've got the right device.
- Infotmic 10.2" Flytouch2 SuperPAD
- It has 256MB RAM
- It has 2GB Internal Storage
- Android OS 2.1
- Have 2 MicroSD Card Slots
- 1024x600 Screen Resolution
- Infotmic X210 Processor
This ROM is NOT for you if your device is SuperPad 2 / Flytouch 3
- Infotmic 10.2" Flytouch2 SuperPAD
- It has 512MB RAM
- It has 4GB Internal Storage
- Android OS 2.2
- Have 1 MicroSD Card Slots
- 1024x600 Screen Resolution
- Infotmic X220 Processor
-------------------------------------------
Warning: Follow these steps. All of them. If you do, it will work. If you misread or miss a step or skip a step because you are hurrying through the process, it WILL brick your tablet. Flashing is a relatively simple process but it requires patience. If you don't have the time to read all of the directions and follow them, YOU DO NOT HAVE TIME TO FLASH, and stick with your old firmware.
I AM NOT RESPONSIBLE FOR ANY DAMAGE THAT THIS ROM HAS CAUSED. FLASH AT YOUR OWN RISK! SINCE THERE ARE SO MANY CLONES OF THIS TABLET, DON'T EXPECT IT WILL WORK PERFECTLY.
-------------------------------------------
Note: I'm not so good in English and grammar, so bear with me. The images is not so clear co'z im using webcam for fast capture and focusing.
If I made mistakes, corrections are welcome.
:: Super Improvement ::
- Much Faster response, you will notice playing Angry Birds is smoother.
- New Default Application updates
- New Icons
- New 3D Gallery
- Supports Flash on browser.
- GPS is now working, GPS app required to test the satellite lock.
- Youtube on browser working fine if you have fast connection.
:: Known Issues ::
- "Some" RJ45 (Ethernet) Port sometimes not working
- "Some" WiFi unstable
- "Some" 3G Device not working
- Market is still free, no paid apps.
- Save path not on MicroSD but inside your Tablet (fixed)
- When it sleeps, it sleep to power off.
- Youtube App is not working, you need to download another compatible version.
:: Thanks to the Donors ::
- Austin Pc Fixed .Com
- frank rugolo
- pastorb1
:: Credits ::
- stragulus
- dgcruzing
- isergio
- _barsuk_
- Aries on an Android (android tablet forum)
- rgocal (android tablet forum)
- and others who I forgot to mention
This guide is for Windows XP, I'm windows7 user before but I downgrade because I want to use my other old softwares for flashing. If you get the idea you can do this also on windows7.
------------------------------
NOTE:
- For windows7 user Run As Administrator the IUW application.
- 64bit Operating System may not work with IUW application.
------------------------------
NOTE: If your tablet showing version 6.1.5 (559[or higher]) or 0.6.1.2(587) Then you can skip some part of the guide. Scroll down directly to the "Alternative Solution" using MicroSD burning. You still need to download the Android 2.2 Froyo Main Firmware.
------------------------------
:: Preparing the Male to Male USB Cable :: (if you have one skip this)
Ok let's start, what you need is a male to male USB cable, if you don't have one you can make your own male to male cable.
Tools
- 2 USB Cable
- Scissor or Cutter
- Electrical Tape or anything to cover the exposed wire
- Solder Lead (Optional)
- Soldering Iron (Optional)
1. Cut each USB to the nearest tip of the female, to make your USB cable longer.
2. Cut each end of the USB to expose the wires and copper wires.
3. Now you can connect each end of the USB, and twist each wires, you can solder it if you like.
4. Now you can tape each wires, and tape all the wires.
This is the finish product.
:: Preparation for Files and Flashing Procedures ::
*Note: Please PM me if there are missing links.
Download IUW 1.1 Flashing Tool
Download Firmware V2852
Download Uboot - V 0.6.1.2(587) working camera
Download Main Android 2.2 Froyo ROM with Flash 10.1
Download New Ramdisk image to change the path of save files to SDCard1
Download Extra Tools Apps
Updated ROM: 25.11.2011
Download Firmware Froyo 2.2 v2.5 #4325
------------------------------------------------------------
:: Clean up the tablet files ::
- Wipe cache partition
- Wipe data/factory reset
- then reboot.
Remove all microSD so that it will not start burning if you have firmware on your microSD.
Visit this link how to clean the data for your tablet.
------------------------------------------------------------
:: Let's Start ::
1. Make a Folder on your desktop for fast track of your files, I named it Froyo 2.2 and save all your downloaded files here.
2. Download IUW Flashing tool, and save it inside the folder of your desktop.
3. After download, unpack it inside the folder.
NOTE: Your tablet should be full charged, and connect the charger while flashing, just to make sure it will not drain much power on your tablet. Don't forget also to remove all your MicroSD cards from the tablet.
4. Since your done making your USB Cable, your tablet should be off and plug the other end USB to the PC and plug the other end on your tablet USB Port between the headphone jack and SDCard Slot 1.
5. Open the IUW application, select Link USB on the left side. And on the Link information the DV (driver) is greyed, because it's not detecting the tablet with driver.
6. Power up the tablet with this combination Power + Menu button for few seconds until you see the message on your tablet "Communicating with PC..."
7. A New Hardware notification will pop up on your PC Screen.
(you have 2 minutes to setup this or the tablet will boot normally)
Select Advance, Next.
Browse the driver from your desktop inside the folder "otg_driver"
Then it will install the driver.
The flasher will turn to green.
:: FLASHING V2852 ::
This rom will only run on tablets which display a version number in the bottom-right "Infotmic" screen when first turned on.. If yours doesn't display a number there, you will need to flash firmware v2852 first.
8. 'Choose a wrapped image' press the "..." button Select the IUS file "WWE10B_Android_393477-v9full.ius"
9. Click 'burn' to flash the tablet.
This picture is flashing the tablet.
10. After burning finishes, plug out the USB cable and press Reset, then restart the device.
:: Flashing UBOOT ::
11. Open UIW application, and connect your tablet USB to PC.
12. Select "Link USB" on "USB Mode:" select "Expert Mode" Uncheck all except "UO".
13. Browse the "u-boot-nand.bin" the one with working camera.
14. After flashing this is the result.
15. Your screen with start to flicker, it will start to initialize.
16. I will take time to load up, until you are in display calibration.
:: Flashing IMAGES ::
17. Power off your tablet, and prepare again the UIW to flash the main android 2.2 firmware.
18. Click Link USB, and select Expert burn.
NOTE: Use the other Ramdisk.img fix you download, not from the flash10.1-android2.2 folder.
19. Power up the tablet with this combination Power + Menu button for few seconds until you see the message on your tablet "Communicating with PC...", if the Dv is green your ready and click the burn button.
20. I will take time to load up, until you are in display calibration and your Done!
:: Alternative Solution ::
If you cant burn the main android image using USB method. You can try the MicroSD card method, but this is only applicable if your tablet will display the version under the InfoTMIC start up logo.
Lets make a bootable MicroSD, to convert the file size to 700~705MB, you need a MicroSD at least 1GB.
Download WinHex with MicroSD Clone Image.
1. Open your WinHex
2. Click Tools->Disk Tools->Clone Disk->
3. On Source Raw Image: click the file button.
locate the "aben.start sector" file, click open.
4. On Destination Medium: click the drive button.
locate the Physical Media of your card reader/MicroSD, ok.
5. Fill in the Start Sector with 0 (zero).
6. Click OK, and WinHex pop up will appear, click OK and it will start cloning the image file to your MicroSD.
7. A notepad will pop up that you are done cloning the image, close and press OK on the pop up message.
8. Close WinHex, and safely remove the card reader/MicroSD.
9. Plug the card reader/MicroSD again, and do a quick format.
10. If you successfully formated the MicroSD to 700~705MB then create an "android" folder, and copy all the main image files on the folder. And your Done! :: If you fail there are some other reason, some card reader is not working properly, try to find another card reader, if your phone has MicroSD Slot and able to communicate and serve as card reader, you can use this also.
- ramdisk (use the other ramdisk you download)
- system
- uImage
- userdata
some optional or skipped file.
- u-boot-nand (android v2.2)
- zSYS (Flytouch Official Image 3245)
This is what's inside the MicroSD on android folder.
12. After copying the files plug the MicroSD at the top most/Slot 1 between the 2 USB port.
13. And Power On your Tablet, and it will start Flashing just like here on the video. http://www.youtube.com/watch?v=47kf4-Vbba8#t=3
You can also use this MicroSD to downgrade back to 3245 firmware.
Thank you.
Don't forget to click the Thank You button
joshgabel said:
SmaRkieS whats your Paypal email address? i owe you $ worked like a charm!
Click to expand...
Click to collapse
Confirmed that the 3G USB modem Huawei E1752 is working perfectly. Just create an APN and reboot while the Huawei E1752 is in the USB port.. After startup it makes a connection and works fast!
manually created an APN in settings/connections/mobile providers and configured for your local provider. Also enabled data connection, otherwise I won't start searching. After that reboot and it started working. No specials actions required.
:: Google Sync ::
If you want to sync the calendar (basic) and contacts go to:
Contacts-> Menu-> Accounts-> Add Account-> Corporate-> enter data for a google account -> choose the default setting -> set the sync options-> Enter the name
:: z4root USB Debug solution ::
1. Download Launcher Pro.
2. Install Launcher Pro.
3. Tap the Home Button at the upper left, it will let you choose different type of launchers.
4. Select Launcher Pro.
5. Tap Menu Button = or at press the menu button at the top of your tablet.
6. Tap the + add
7. Tap Shortcuts
8. Scroll Down, and Tap the Activities.
9. Wait it will load, scroll down to Settings.
10. Scroll down and look for Development.
11. Press OK without changing the name.
12. On Desktop/Home Tap Development.
13. Check the USB Debugging.
14. Restart if necessary.
15. And your done ready to root.
:: Enabling Live Wallpapers ::
1. After rooting your device, your good to go.
2. Install Busybox Installer.
3. Open Busybox Installer, OK, SuperUser request Allow.
4. If BusyBox is not found, tap Install.
5. Press Back Button on your tablet.
6. Install Terminal Emulator.
7. Open Terminal Emulator.
8. Type this commands.
Code:
su
mount -o remount,rw,codepage=utf8,vfat,xattr,check=no /dev/stl5 /system
cat /sdcard/LiveWallpapersPicker.apk > /system/app/LiveWallpapersPicker.apk
cat /sdcard/libRS.so > /system/lib/libRS.so
cat /sdcard/librs_jni.so > /system/lib/librs_jni.so
sample pic of my terminal emulator, I made a mistake in line 5 but it's ok just retype it.
9. Reboot your tablet.
10. Install your live wallpaper apps.
11. On your home screen, tap the menu button. (near the volume next to back)
11. Tap Wallpaper
12. Tap Live wallpapers
13. Select your live wallpapers, and your done.
sample screen shot.
:: GPS Configuration and Setup ::
Download GPS Test Tool
1. Install that app in your tablet.
2. Go to Settings
3. Go to Location & Security
4. Check Use wireless networks
5. Check GPS Satellites
6. Plug your GPS Antenna.
7. Take your antenna outdoor, if the wire is still long try to place the antenna higher.
8. Connect to your WiFi.
9. Run the GPS Status application.
10. Wait for 5~20 mins for satellite discovering and locking.
11. Wait for 5 satellite lock on and you are done.
12. Run your Google Maps, and your locked to your location.
This is the picture number of satellites and number of locked satellites.
The GPS is very accurate.
:: Dismantle/Dissemble of Superpad/Flytouch2 ::
http://www.androidtablets.net/forum/gome-flytouch-ii/14255-inside-my-superpad.html
===========================================================
This is my screen now.
with new virtual keyboard.
I also try swapper2, they say it can improve the performance. This is my Terminal Emulator.
Other Useful Guides here.
http://forum.xda-developers.com/showthread.php?t=1067746
http://forum.xda-developers.com/showthread.php?t=1048776
http://forum.xda-developers.com/showthread.php?t=831178
-------------------------------------

Good work
25-12-2012 -updated links
Download IUW 1.1 Flashing Tool iuw1.1-english.rar - 291.98 KB
Download Firmware Froyo 2.2 v2.5 #4325 - 4325.zip - 212.16 MB
Download Uboot - V 0.6.1.2(587) working camera u-boot-nand.zip v0.6.1.2(587).zip - 130.13 KB
Download New Ramdisk image to change the path of save files to SDCard1 Ramdisk_SmaRkieS.zip - 166.06 KB
Barsik recovery for superpad flytouch - recovery_rd.zip - 1.32 MB

Thank you, cause this people are lazy enough to open the pdf/docx file instructions hehehehe.
I made some mistakes on my post, please post some corrections and suggestions are welcome also.

Thank u for your instructions. Its the first time I manually try to flash my pad so I had to flash to 2852 rom first and it does but when i restart and check my version build it is still on build 1561 (flashing with usb cable).
Tried couple of times can u help me out?

kolk11 said:
Thank u for your instructions. Its the first time I manually try to flash my pad so I had to flash to 2852 rom first and it does but when i restart and check my version build it is still on build 1561 (flashing with usb cable).
Tried couple of times can u help me out?
Click to expand...
Click to collapse
Can you see the version under the InfoTMIC start up logo?
If you can see it then you are ready to update using MicroSD method.

@smarkies
no there is no version number
first time I connected to pc it said found new hardware but no driver. There I selected the otg driver in the package.
Burntool does connect and goes up from 0 to 100 procent (very quick about 7 secs.) when i burn but when i check im still on my previous build.
After that I tried to update to other firmware using update.zip on winhexed sd card. This did work so now I am on 1623 build.
after that I tried again using burntool but still didnt work out.
In the folder containing the 2852 rom there are also two folders
0.6.1.2_1.4.587_OV2655 and
0.6.1.5_1.4.587_GT2005
both contain uboot and uboot nand files is there something I have to do with them before I can flash?
Any advice?
Other thing I noticed: in recovery menu there is a line saying:
e:can't open / cache / recovery / command
It didnt stop me from update with update zip but could it be the reason burntool isnt working for me?

kolk11 said:
@smarkies
no there is no version number
first time I connected to pc it said found new hardware but no driver. There I selected the otg driver in the package.
Burntool does connect and goes up from 0 to 100 procent (very quick about 7 secs.) when i burn but when i check im still on my previous build.
After that I tried to update to other firmware using update.zip on winhexed sd card. This did work so now I am on 1623 build.
after that I tried again using burntool but still didnt work out.
In the folder containing the 2852 rom there are also two folders
0.6.1.2_1.4.587_OV2655 and
0.6.1.5_1.4.587_GT2005
both contain uboot and uboot nand files is there something I have to do with them before I can flash?
Any advice?
Other thing I noticed: in recovery menu there is a line saying:
e:can't open / cache / recovery / command
It didnt stop me from update with update zip but could it be the reason burntool isnt working for me?
Click to expand...
Click to collapse
dont touch any file inside the folder of 0.6.1.2_1.4.587_OV2655 and 0.6.1.5_1.4.587_GT2005.
Try to burn the UO first, u-boot-nand.bin the one with working camera, if not try this another u-boot-nand.
Then burn the Main Image Android Rom.

Thanks for the quick repy to be sure I wont Brick my Pad
for the uo file I use Uboot - V 0.6.1.2(587) or uboot - 0.6.1.5 (587)
and for the ROM files I only use files from the 20110416-v1001 folder?
If so I will burn right away

kolk11 said:
Thanks for the quick repy to be sure I wont Brick my Pad
for the uo file I use Uboot - V 0.6.1.2(587) or uboot - 0.6.1.5 (587)
and for the ROM files I only use files from the 20110416-v1001 folder?
If so I will burn right away
Click to expand...
Click to collapse
I abused my pad flashing many times, and still it is alive, It will brick if your USB cable is poorly made, or overpowered that will fry the motherboard of your tablet, just like what happen to other people.
the safest way to flash is microSD, but it is tricky with this froyo update that's why I risk on flashing using USB.
V 0.6.1.2(587) this one has working camera. But you can try both uboot to display the version under the InfoTMIC logo. But I use V 0.6.1.2(587) coz I want the camera to work fine.
Yes the files inside the 20110416-v1001 folder except for the u-boot-nand inside.
If the USB flashing doesnt work you can try the alternative, using the microSD.

Thank u very very much worked like a chime.
camera and wifi are working I used uo V 0.6.1.2(587)
will play with it tonight to see what else it can do now
Greetz

kolk11 said:
Thank u very very much worked like a chime.
camera and wifi are working I used uo V 0.6.1.2(587)
will play with it tonight to see what else it can do now
Greetz
Click to expand...
Click to collapse
Glad you made it! Check out the speed and the Gallery is now 3D
So you did the UO burn first then Main Image?
Confirm this and I will revise my post.
Co'z I burn my tablet the other way. Main Image then UO.

Yep U0 first than main Rom
Only thing is market has only free apps
but doesnt matter can get apps all over the internet

kolk11 said:
Yep U0 first than main Rom
Only thing is market has only free apps
but doesnt matter can get apps all over the internet
Click to expand...
Click to collapse
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
This is my screen now.
with new virtual keyboard.
I also try swapper2, they say it can improve the performance. This is my Terminal Emulator.

IUW does not work with 64 bit
Please add in the OP that some on other forum sites have confirmed that IUW does NOT work with any 64 bit operating system.
I will link to reference if I come across it again...
For Development USB debugging options for Z4Root, you may also want to link to my post HERE.

quick tip for windows 7 users, picture 6 will not happen, at least it didn't for me, you need to navigate to devices and printers, find the unknown device, and manually install the otg driver

Works as advertised.
I bricked my tab first, but got it up and running again with your step by step guide. Many thanks!

I followed your instruction for SD card and it worked perfectly. I now have the 3925 version on my Superpad and it seems to be working well. Definite improvement on Angry Birds(which I play way too much) and Home Run Battle 3D. WiFI works fine, don't know about GPS or camera as I don't really use them, but I will check just for curiosity sake Seems to be faster and I have had no random lockups that I had with the v5 I had on previously. I will report back as I use it. Thanks for all the great work!

Jiggity Janx said:
Please add in the OP that some on other forum sites have confirmed that IUW does NOT work with any 64 bit operating system.
I will link to reference if I come across it again...
For Development USB debugging options for Z4Root, you may also want to link to my post HERE.
Click to expand...
Click to collapse
Yes, that's why I made it with Windows XP, and we are aware that 64bit OS is so choosy in terms of software compatibility.
About the USB Debugging, I already made a guide after the Flashing/Burning guide.
caravanman said:
quick tip for windows 7 users, picture 6 will not happen, at least it didn't for me, you need to navigate to devices and printers, find the unknown device, and manually install the otg driver
Click to expand...
Click to collapse
Yes, It is self understanding, there is a note above I use windows XP, but the idea is still there.
If you like to contribute for a guide in windows 7 is welcomed.
nullandvoid said:
I bricked my tab first, but got it up and running again with your step by step guide. Many thanks!
Click to expand...
Click to collapse
You are welcome, enjoy your new faster tablet.
woodeman said:
I followed your instruction for SD card and it worked perfectly. I now have the 3925 version on my Superpad and it seems to be working well. Definite improvement on Angry Birds(which I play way too much) and Home Run Battle 3D. WiFI works fine, don't know about GPS or camera as I don't really use them, but I will check just for curiosity sake Seems to be faster and I have had no random lockups that I had with the v5 I had on previously. I will report back as I use it. Thanks for all the great work!
Click to expand...
Click to collapse
Thank you so much, but I would like to suggest to remove the long quote of my post, just to make the thread clean.

SmaRkieS said:
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
FOr your confirmation I directly made the UO burn and than burned the main image burn never touched WWE10B_Android_393477-v9full.ius
Where can I find your post on applanet to get market running?
Thanks in advance
Click to expand...
Click to collapse

kolk11 said:
SmaRkieS said:
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
FOr your confirmation I directly made the UO burn and than burned the main image burn never touched WWE10B_Android_393477-v9full.ius
Where can I find your post on applanet to get market running?
Thanks in advance
Click to expand...
Click to collapse
pmed you.
Click to expand...
Click to collapse

The GooApple V5+ - Information thread

GooApple V5+ : iPhone 4/4S Replica
Everything you need to know about it !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
____________________
UPDATE : ADDED CMWR 6.0.2.7
____________________
Review Videos
GooApple V5+ Review by AndroidSale
Official GooApple V5+ review
http://v.youku.com/v_show/id_XNDc1MzAwMTIw.html
____________________
Specifications
System
Model: GooApple V5+
Processor: MTK MT6575, 1Ghz - ARMv7
Operating System: Android 2.3.6
Kernel: Linux v2.6.357 ([email protected]) (gcc version 4.4.3 (GCC) )
Ports: 3.5mm Earphone Jack and mini USB
Launcher: iLauncher modified
Partition: MTD
Display
Resolution: 960x640 pixels
Density: 1920x1280
DPI: 320.0
Screen size: 3.5"
Color support: 16 million colors
Functions: Touchscreen, Multi-Touch, Retina
Camera
Front Camera: 1.3 MP
Back Camera: 8 MP
Functions: Flashlight, Zoom, Auto Focus, Scene mode, ISO adjustment, Time Face Detection
Connectivity
Carrier: Unlocked
Network band: GSM 2G: 850/900/1800/1900 MHz and WCDMA 3G: 2100MHz
Data: GPRS, EDGE, HSPA
Message: SMS, MMS, Email
Bluetooth: Bluetooth 2.0
WLan: Wi-Fi IEEE 802.11 b/g/a
USB: USB 2.0
GPS: GPS, built-in GPS chipset (EPO and AGPS)
SIM: Micro SIM card (Single)
Phone Book: More than 10000 contacts
Browser: HTML, Safari
Battery
Type: Built-in Li-on battery ; 1050mAh
Standby Time: 120-150 hours
Talking Time: 3-4 hours
Memory
Built-in Memory : 512 MB
External Memory : 8GB/16GB/32GB (optional : SDcard)
RAM: 512 MB
Phone Model
Replica: 1x1 iPhone 4/4S replica
Dimensions: 115h - 58.6w - 9.3d (mm)
Weight: 135g
Other Features
Button: Mute Button just like iPhone
Video Player: AVI, MP4, 3GP, MOV, MKV, FLV
Audio Player: MP3, FLAC, APE, OGG, AMR, AAC, WAV, AWB
Images: JPG, PNG, BMP, GIF
E-book Format: TXT, CHM, DOC, HTML
Ring Tones: Original iPhone 4 ringtones
Play Store: Google Play Store
Radio: FM Radio
Sensors: Gravity Sensor, Proximity Sensor, Lichtsensor, Accelerator Sensor
Recovery: Stock recovery is E3
Languages
English, French, German, Spanish, Portuguese, Russian, Arabic, Indonesian, Italian, Malaysian, Turkish, Vietnamese, Thai, Chinese
Accesories
1x GooApple V5+ Phone
1x Travel Charger
1x USB Data Cable (I suggest buying a new one)
1x Headphone (if plugged in, both the phone & headphone give sound)
1x Screen Protector (optional)
1x iPhone Skin Case (optional)
- ALL ORIGINAL IPHONE 4/4S CASES, RECHARGERS, HOLDERS, ... ARE COMPATIBLE
____________________
How to Root
This was a hard & long trial to get this phone rooted. Though, it's a very simple way found by me and yuweng, thanks bro!
Based on yuweng's tutorial : MT6577 CWMR Root Updated V2[/b]
Download these and follow the tutorial:
ADB.zip - http://www.mediafire.com/?11cbu388oqu8amw
All the Drivers I could find - http://www.mediafire.com/?wfr5fgkxkdau6w4
CWMR Recovery's.zip - http://www.mediafire.com/?2r30o428558h22q
MTK Rom Studio 1.1.77.146.zip - http://www.mediafire.com/?h22puc8kac6axv7
SP Flash Tool v2.1134.00.zip - http://www.mediafire.com/?ob5caeigzc1ga10
SP Flash Tool v3.1224.0.sn85.zip - http://www.mediafire.com/?5u29nf4fp4omw9n
Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip - http://www.mediafire.com/?fee3e7cta5mg3fp
- Setting up the folders and phone (to make it easy)
1. Create a folder in C:\ called "GooApple"
2. Extract all the ZIP files EXCEPT "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" to "C:\GooApple\" so you have 6 folders in GooApple.
3. And copy "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" to "C:\GooApple\"
4. I prefer doing a factory reset before doing this.
* Factory reset can be found at Settings > General > Privacy > Factory data reset > Reset phone
5.Now enable Unknown sources, USB debugging and Stay Awake.
* Unknown sources can be found at Settings > Store.
* USB debugging and Stay Awake can be found at Settings > Store > Development.
6. Make sure all drivers are installed properly. Some might install when connecting the USB.
7. Turn off your phone and unplug your USB cable from the phone (Let the USB be in your computer/laptop)
- Backup your own recovery (not required but suggested)
8. Open "Flash_tool.exe" from version "3.1224.0.sn85".
9. Click on File > Open Scatter-loading file, then browse to "C:\GooApple\MTK Rom Studio 1.1.77.146" and open "MT6573_Android_scatter.txt".
10. Click on the Read back tab (top). (If there is anything in the list, please Remove it.)
11. Click on Add and double click on the ROM_1.
12. Now type recovery.img at Filename, then browse to "C:\GooApple\MTK Rom Studio 1.1.77.146\SPFT_UPLOAD" and click Save.
13. In the popup, select
* Type: Hex
* Read Method: Read Page Only
* Start Adress: 0x980000
* Length: 0x00500000
And click Ok
This info can be found when loading the Firmware.info in MTK Rom Studio
14. Click on Read back. Now hold the "Volume -" button and insert the USB in your phone. It should say OK at the end.
Now you have a backup of your original recovery.img in case you want to restore it.
- Installing CWM Recovery (REQUIRED FOR ROOTING!!)
14. Go to the CWMR Recovery's folder, then choose if you want the Standard CWM or the Touchscreen CWM and copy the recovery.img included to "C:\GooApple\MTK Rom Studio 1.1.77.146"
* Standard CWM is controlled by Volume up and down. Touchscreen CWM is controlled by both.
15. Open "Flash_tool.exe" from version "2.1134.00".
16. Click on Scatter-loading and browse to "MT6573_Android_scatter.txt" in MTK Rom Studio and open it. (Click OK on the popup)
17. Now make sure everything is unchecked EXCEPT "RECOVERY". (Don't forget that your phone should be turned off and unplugged.)
18. Now click on download and insert your USB cable. It should say OK at the end.
Now you have CWM Recovery installed.
- Rooting the phone
19. Start your phone and connect to USB Storage Mode.
20. Copy "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" to the ROOT of your SDcard. And turn off USB Storage (but keep your USB in)
21. Now boot your phone into recovery mode. There are 2 methods, I prefer method #2 as it's more safe and works most often. (Someone's phone kept vibrating while doing method #1)
* Method #1:
- Shut off your phone (wait untill it vibrates to make sure it's completely off).
- Hold the "Volume +" button and the "Power" button.
- You now are in recovery or your phone keeps vibrating.
* Method #2:
- With your phone on, start "cmd.exe" as administrator on your PC.
- Type "cd C:\GooApple\ADB" (without the "") and press enter.
- Type "adb reboot recovery" (without the "") and press enter again.
- Your phone shall reboot in recovery.
22. In recovery, select "install zip from sdcard", then "choose zip from sdcard" and select "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip". Select "Yes - Install ..."
* Recovery Controls (Standard CWM)
Volume + = UP
Volume - = DOWN
Power = Select
Home = Go to +++++Go Back+++++
23. Once completed, select Go Back, and select wipe data/factory reset.
24. Now select "reboot system now".
And here we go... Your GooApple V5+ is Rooted !
Thanks again yuweng for the support !
____________________
How to Increase Internal Memory - INT2EXT method (ROOT required)
"INT2EXT on MT6575 / 77 for the extreme gamers !" for GooApple V5+ thanks to yuweng !
- NOTE: THE PHONE TENDS TO BE SLOWER AS IT HAS TO LOAD FROM THE SDCARD
Based on yuweng's tutorial : http://www.mediafire.com/view/?7zjz4onhos826bk
Download and/or install and extract these:
MiniTool Partition Wizard (Home edition) - http://www.partitionwizard.com/download.html
INT2EXT-mtd.7z (Includes install-recovery.sh) - http://www.mediafire.com/?16psto1xqw4b0s0
Notepad++ (To edit install-recovery.sh) - http://notepad-plus-plus.org/download/v6.2.3.html
ES File Explorer File Manager - https://play.google.com/store/apps/...sMSwxLDEsImNvbS5lc3Ryb25ncy5hbmRyb2lkLnBvcCJd
BACKUP YOUR GOOAPPLE V5+ WITH CWMR
1. First I installed and opened MiniTool Partition Wizard and mounten my SD card (32gb & Class10) with going in USB Storage Mode.
2. In MiniTool Partition Wizard, I selected my drive and resized it from 29gb to 26gb (FAT32).
3. Then I selected the remaining 2.5-3gb and created a new partition : Primary , Ext4 , 4kb. Don't forget to click Apply at the top left.
4. Then I extracted INT2EXT-mtd.7z and installed Notepad++.
5. With Notepad++ , I opened install-recovery.sh and changed unbind to bind in lines 61, 66, 71 and 98. Then saved it.
6. Now I copied the EDITED install-recovery.sh to the root of my /sdcard/ (Location when you open your phone).
7. Having ES File Explorer File Manager (EFEFM) installed, give it Root acces via the Settings at the bottom (check everything at root settings).
8. Next, select install-recovery.sh in EFEFM and copy it to /system/etc/ and give it full read/write/execute acces.
9. After this is done reboot your phone. For me, after the first boot it just shutted off. So then I had to power it on again and I had 2.6gb internal memory.
Hooooorah ! :good:
Thanks again yuweng for the files, info, tutorials and time !
Proof
____________________
Change BOOT logo to iPhone's Apple
So this will change the boot logo of your GooApple from an Android logo to Apple logo.
The things you need:
The boot images - http://www.mediafire.com/?363hvgcmw46wl6w
ES File Explorer File Manager or Root Explorer
1. Extract the iphoneboot.zip to your /sdcard/ so you have /sdcard/system/logo/...
2. Open the file manager, browse to /sdcard/ and copy the system folder.
3. Next go to the root of your phone and change the permissions to R/W.
4. Now paste the system folder here so it overwrites the system logo files.
5. Reboot your phone and voila, now you have the iphone boot !
____________________
Tips&Info
- Make 3 backups of your phone through CWM Recovery because some might get corrupt.
- Use Titanium Backup Pro or a similar tool to remove unused/chinese system apps.
- The MTK6575 can be compared to the PowerVR processor. So the PowerVR games work on the GooApple V5+.
____________________
Custom Recovery *.img
CWM Recovery v6.0.2.7 - Standard Version (MTD partition)
CWM Recovery v6.0.2.7 - Touchscreen Version (MTD partition)
TWRP Recovery - Touchscreen (MTD partition) : Make sure when doing a backup you choose "External".
____________________
Change BUILD.PROP for more compatibility of Apps&Games
Your phone is being recognized as a Android Alps phone which a lot of apps don't even recognize.
So the best thing you can do is change your "build.prop" a little to increase the compatibility.
For example, yesterday I bought N.O.V.A. 2 which says it's not compatible (but it is).
1. Open Root Explorer or something similar.
2. Go into /system/ folder. Make sure the folder is R/W.
3. Press and hold on build.prop then select "Open in Text Editor".
4. Next, change the following.
- ro.product.model=GT-I9000
- ro.product.brand=samsung
- ro.product.name=GT-I9000
- ro.product.device=GT-I9000
- ro.product.board=GT-I9000
- ro.product.manufacturer=samsung
5. Then go back and it will ask you to save it. Save it.
6. Now reboot your phone and try again with more compatibility !
____________________
Useful Downloads
Android
- ES File Explorer File Manager - Tool to browse your folders and copy/paste/delete - Free
- Older MobileUncle Tools - This version is better for changing the recovery via a tool. (name: m44tools.apk, it also includes the 2 recovery's for this phone) - Free
- MobileUncle Tools - Special tool for MTK Android Devices - Free
- MobileUncle Flashlight - App to switch on/off the flashlight - Free
- Pimp My Rom - Awesome tool which has settings to increase for example your phone's internet speed !
- Explorer (or Root Explorer) - Tool to browse your folders and copy/paste/delete - Free or $
- Titanium Backup (or Pro) - Tool to backup/uninstall apps (also for system apps) - Free or $
Computer
- Xmedia Recode - Tool to convert videos to compatible videos for GooApple V5+ (Use iPhone 4 preset)
CLICK TO BROWSE OFFICIAL ROMS
This is the original ROM that comes with the phone : https://dl.dropbox.com/u/76038325/Gooapple_V5_Plus_ROM_A116A_V1.0_P2MB3_20121110.rar
To check which ROM version you need, dial *#2170#*.
The number didn't work for me but they said it works at the official GooApple site. I used A116_4S to update my phone.
IF YOU FOUND SOMETHING OR JUST WANT TO ASK SOMETHING PLEASE FEEL FREE TO POST BELOW
I really want to thank the following people:
yuweng - Always helping me out with troubles.
bigrammy - Giving me the tip to use an older version for doing a Download in SPFT.
The phone can be bought at Android-Sale.com​

What I wish to do with this phone and might need help for:
ROM (standard and v5+4s_a116_ios_root_12.11.16_Launcher)
- Get GPS to work on my phone. (Still don't know if it's just me or the phone.)
- Change the USB Storage Mode image to something like the iPhone by editing Framework-res.apk.
- Increase Internal memory by taking System's memory.
ROM (v5+4s_a116_ios_root_12.11.16_Launcher only)
- Remove all the chinese icons in "Google Pinyin IME" keyboard and add AZERTY for Belgium and France.
GooApple V5+ Manual
Thanks to "Q" for looking up this valuable information !
How to take a screenshot:
Tap both the "Home"-button and "Power"-button simultaneous. If you have sounds activated, you'll hear a shutter sound.
How to force restart:
Deep at the bottom of the 3.5 headphone jack there is a restart-button. Use a small tool like a bent paperclip or toothpick to reach it.
You can use this restart-button if your phone freezes and can not be restarted using the normal power-button.
THIS IS A LIFESAVER !
Recovery-menu explained:
The Recovery-menu is a boot-menu that can be used to backup, restore, clean cache or change ROMs in your GooApple phone.
This menu can be either in English or Chinese and may vary slightly depending on what type of Recovery came pre-installed on your phone.
You can install a different Recovery-menu on your phone like CMWR / TWPR
To access the Recovery-menu:
- Turn off your phone.
- Press and hold the PLUS-button and POWER-button on your phone until you arrive at the recovery menu.
NOTE: Depending on ROM and Recovery-version, you may actually need to press MINUS-button and POWER-button to access the Recovery-menu
Factory-test-menu:
This can be used to test the hardware functionality of your phone.
To access the Factory-test-menu:
-Turn off your phone.
-Press and hold the PLUS-button and POWER-button on your phone then lose it and hold it again after the vibration.
NOTE: It doesn't always work so you really need the perfect timing.
Navigating the user-interface:
This menu you can close running apps on the background so pretty usefull sometimes.
- Double-tap the "Home"-button shows running/standby apps and possibility to close apps by long-pressing icons in deployed menu.
- Double-tap the "Home"-button at the unlock-screen will show you the music player and a button to quickly acces the camera.
- Hold the "Home"-button to acces Wallpaper and Settings faster.
- Pressing the "+"-button when using the camera will take a picture.
NOTE: Double tapping must have some kind of pace in pressing these 2. If you do it too fast, ut doesn't work.. but too slow, it doesnt work either, so it has to be right.
- "Long-pressing" an icon in the menu makes the icons jiggly so you can change the position of your icons by dragging them to a desired position or on another icon to create a folder.
- "Long-pressing" the MINUS-button can bring up a menu in some applications. - UNCONFIRMED
Trouble hanging up a phone-call?
- Holding the phone vertically during a call turns off the screen (if the light-sensor has been covered).
- Holding the phone horizontally for a few seconds, will turn the screen on again and display the "End call"-button.
NOTE: Make sure you never double-tap the "Home"-button during a call. It will minimize the calling session so you will still be calling in the background. So make sure you always press the "End call"-button.
Change user interface language
If you cleared user data when installing a new ROM, the phone is likely to boot up in Chinese. Follow these steps to change it back to English:
- Press the Settings-button (you can probably identify this by its icon).
- Select the 9th option (General)
- Select the 8th option (International)
- Select the 1st option (Select language)
- Select your language.
NOTE: If you want some influence of your native language, you can install MoreLocale2 from GooglePlayStore. Some apps will be in your native language.
How to change the IMEI-number:
To change the IMEI number, you most likely will have to use MTKdroidTools from MediaFire.com.
It has an option to change the IMEI number but for this, you will need:
- the ADB drivers to be installed.
- A new IMEI number with what you want to change the original one.
- Phone connected to your computer.
How to add more Ring, SMS, Notification - sounds on your GooApple:
- Connect the phone to a computer in USB Storage Mode.
- Create the following folders on your SD-card:
- Ringtones
- Alarms
- Notifications
- Move your own sounds into the appropriate folder.
- Adjust the sounds-settings on your phone here:
- Ring-tone: Settings>Audo profiles>General>Voice call ringtone
- SMS-tone: Settings>Auido profiles>General>Notification ringtone
- Alarm-tone: Enter your Clock-app and add a new alarm and you should be presented with ringtone-options.
How to remove the backcover and change the MicroSD:
You might want to remove the backcover to change the MicroSD card or maybe even to change the cover.
To remove the cover:
- Unscrew the 2 screws at the bottom of your phone. You need a special screwdriver for this.
- Slide the back cover up once the screws are removed.
To change the MicroSD:
- Having the cover removed, you will see the SD card to the left of the battery trapped in some aluminium cover.
- Slide the aluminium cover to the left and now you can remove the SD card.
To put the cover back on:
- Put the cover back in its place, then drag it down (instead of up to remove it).
- Put the 2 screws back

Thanks mate! Very helpfull

AShacks said:
Thanks mate! Very helpfull
Click to expand...
Click to collapse
No problem !
And can anyone with a GooApple V5+ please try this to fix the GPS signal?
1. Charge your phone completely (100%)
2. Download and install Mobileuncle MTK Tools from Google Play.
3. Go to Settings > Location Services and turn off everything here. Also turn off WiFi.
4. Now turn off your phone. Then turn it back on and enable WiFi.
5. At Settings > Location Services
- Enable : Use wireless networks.
- Enable : Use GPS satellites
- Enable : GPS EPO assistance -> Go into EPO Settings and check the EPO file info if it's downloaded, if not, make sure you're connected to the internet and uncheck/recheck Auto Download.
- Enable : A-GPS
6. Open Start Mobileuncle MTK Tools and go to Information and click on Full , then Cold and go back to Satellites.
7. Go outside/window/balcony and after a while, the red dots should become green.
Source: peterssson
They say it works for MTK 657x models but it doesn't work for me. I keep getting red dots instead of green.

Drivers
Hi,
My Gooapple V5+ arrived.
I'm quite lost since no manual inside and this is my first android.
Regarding the rooting issue, I first decided install drivers. As I read, the process is connecting USB to PC and wait for Windows to ask something and then navigate to MT6575 USB VCOM drivers forder.
However, Win7 recognized V5+ as an Android device and installed some drivers, including "My HTC" (?)(!)
Now I can access SD card and maybe something else (I have no idea what) but I can't connect to internet through USB
The big quiestion now for me, in order to root the phone, is how to install drivers properly, bcos we have:
drivers preloader MT65xx
Android ADB Interface
MT6575 USB VCOM drivers
usb_driver
usb_driver_MT65xx_Android_ZTE_v821
I have a Win7 x64 laptop
About the GPS, I have just attempt fix my possition with "MAPS", but despite I downloaded some file, I can't fix possition bcos I'm indoors now.
Thanks for any comments

I'm not sure how the USB thetering works but I'll look into it.
About the drivers. I do it like this: plug it in, then choose the DRIVERS folder and let it choose automaticly.
Android device is correct, but I haven't seen the HTC one though, I'd recommend uninstalling that one.
But really , it can do a lot if you just plug it in, let it search the driver automaticly (don't select any specific folder, just DRIVERS if you really need to).
Also the VCOM driver is more for when you're about to flash your recovery through SPFT which it will install automaticly.
If you need any "personal" help on rooting it, feel free to ask, I'll support you via skype/facebook/teamviewer.
And I too am using Win7 64bit

It seems that Win7 installs a Google pack of USB drivers when detects Android devices.
Maybe this one I found:
softpedia.com/get/MOBILES/Google/Google-USB-Driver-Revision4.
And bcos GooApple is not in the list, Win7 chooses HTC that has 6575 chip aswell.
I will try to uninstall "My HTC" but Windows prefer this to any in the DRIVERS folder, perhaps is more up-to-date.
Any way, automatic driver download/installing maybe problematic with this phone.
Thanks a lot for support. I will need some days to become familiar with the phone before the next level

Thank you, is a very useful guide ! :good:

"Q" said:
It seems that Win7 installs a Google pack of USB drivers when detects Android devices.
Maybe this one I found:
softpedia.com/get/MOBILES/Google/Google-USB-Driver-Revision4.
And bcos GooApple is not in the list, Win7 chooses HTC that has 6575 chip aswell.
I will try to uninstall "My HTC" but Windows prefer this to any in the DRIVERS folder, perhaps is more up-to-date.
Any way, automatic driver download/installing maybe problematic with this phone.
Thanks a lot for support. I will need some days to become familiar with the phone before the next level
Click to expand...
Click to collapse
Ehm it shouldn't say GooApple V5+ in device manager.
For me it says Android Phone > Android ADB Interface and when I turn on USB storage, I just get Portable Devices: G:\.
So yeah, strange it uses HTC. And sorry that I cannot explain properly how to install the drivers because I just installed a few drivers , uninstalled some and installed some other and it worked.
But the most important thing is that the VCOM driver is installed. Which will automaticly install once you try the *Read Back* method. OR this might work too:
Turn off your phone. Plugin the USB cable in your computer but not in the phone (yet).
Now hold the Volume + button and then insert the USB cable into your phone. I think now, it should install the VCOM drivers automaticly.
And no problem Anhuc ! I haven't had time to test some things as I'm in a period of getting a job for the rest of my life

Drivers Problem Fixed!!
Well, for some reason my V5+ only accept VCOM driver if press "+" when plug-in USB in phone OFF, as you suggested.
If connect USB to PC with phone "ON" it ONLY accepts Android ADB Composite Interface, as you said.
So thanks everybody for suggestions and comments. I thing the first challenge overcome :good:
PS:
About the HTC driver I had first, maybe it was bcos I had MOBILE-EDIT software, wich installs many drivers, so I had to remove it from ControlPanel/Pograms/Unistall
But after it, connected phone to PC and it installed automatically "My HTC" driver again
So removed driver from DeviceManager and also removed Google Android USB Package from PC execiting "pnputil.exe -e" in command prompt, to see the OEM# of package, then removed with "pnputil.exe -d Oem#.inf"
Seems extrange but works great. (see details here: technet.microsoft.com/en-us/library/cc730875.aspx)
I have taken some screen shots of this in case someone need.
Hope may help people with persistent drivers....

"Q" said:
Drivers Problem Fixed!!
Click to expand...
Click to collapse
Good to hear that Q and thanks for sharing the information on what was causing it !
It can always help someone else out who has the same issue.
Anyways, I guess you can get to the part of flashing the phone with CMWR right?
I suggest jus reading the first part of the Rooting untill installing CMW and start there as thats the basic thing you need to do as the files I uploaded already include the patched recovery.img.
To see some pictures, check this out : http://www.mediafire.com/view/?8mxvy0ey5yfdu59 page 16 thats basicly how to Download recovery.img to your phone. But always follow my tutorial or ask me to do it for you

GPS without signal
Yes, I downloaded averything from v5+ tutorial and carefully read and understood this excellent work.
However, manage GPS to work is my priority now.
Is there any light in the dark?
I tried and tried, downloaded EPO files, used MTK Tools and even installed an iGo My Way version compatible with Retina screen.
One hour in the field and only saw a little signal bar of one satellite (if it was a satellite) but no points (red or green) at all in MTK Tools.
Have someone seen at least a single pretty point in the grid?
Thanks for any help.

"Q" said:
Yes, I downloaded averything from v5+ tutorial and carefully read and understood this excellent work.
However, manage GPS to work is my priority now.
Is there any light in the dark?
I tried and tried, downloaded EPO files, used MTK Tools and even installed an iGo My Way version compatible with Retina screen.
One hour in the field and only saw a little signal bar of one satellite (if it was a satellite) but no points (red or green) at all in MTK Tools.
Have someone seen at least a single pretty point in the grid?
Thanks for any help.
Click to expand...
Click to collapse
Ooh thanks for helping out.
I do get red dots yeah but they don't turn green :/
Things you could try is
Download GPS Status & Toolbox : Launch GPS Status & Toolbox. You'll see a compass and some other stats. Hit the menu button for more options.
Make sure you have an active data connection and go to "Manage A-GPS State". Then, tap the "Download" button in the menu that pops up. When it's done, exit the app.
And another thing that made me come closer was changing the gps.conf but I dont remember what tool to use. You can do it manually though. (It's located in system/etc)
For Belgium
NTP_SERVER=be.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
# DEBUG LEVELS:
# 0 - none, 1 - Error,
# 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
DEBUG_LEVEL =0
ACCURACY_THRES=5
INTERMEDIATE_POS=0
ENABLE_WIPER=1
SUPL_HOST=supl.google.com
SUPL_PORT=7276
REPORT_POSITION_USE_SUPL_REFLOC=1
# blank
Click to expand...
Click to collapse

bOyka8 said:
Ooh thanks for helping out.
I do get red dots yeah but they don't turn green :/
Things you could try is
Download GPS Status & Toolbox : Launch GPS Status & Toolbox. You'll see a compass and some other stats. Hit the menu button for more options.
Make sure you have an active data connection and go to "Manage A-GPS State". Then, tap the "Download" button in the menu that pops up. When it's done, exit the app.
And another thing that made me come closer was changing the gps.conf but I dont remember what tool to use. You can do it manually though. (It's located in system/etc)
For Belgium
Click to expand...
Click to collapse
Okay!
At least I have the dots in grid.
8 satellites in red but no singnal bars :/ after 30 min with all assistance enabled and filter off.
It's very strange, all my GPSs (I have 4 more devices) can get possition from cold in less than 20 min,
Some firmware issue here, I pressume.
I will contunue with this...

bOyka8 said:
Anyways, I guess you can get to the part of flashing the phone with CMWR right?
I suggest jus reading the first part of the Rooting untill installing CMW and start there as thats the basic thing you need to do as the files I uploaded already include the patched recovery.img.
To see some pictures, check this out : http://www.mediafire.com/view/?8mxvy0ey5yfdu59 page 16 thats basicly how to Download recovery.img to your phone. But always follow my tutorial or ask me to do it for you
Click to expand...
Click to collapse
Ok, I need the V5+ rooted to get access to system/etc....
After reading e/t in tutorial, just a stupid question: " I will loose all changes after flashing, and will need to begin again with configurations?"
I think I know the answer

"Q" said:
Ok, I need the V5+ rooted to get access to system/etc....
After reading e/t in tutorial, just a stupid question: " I will loose all changes after flashing, and will need to begin again with configurations?"
I think I know the answer
Click to expand...
Click to collapse
I don't think so, you can still do it without losing everything.
Just flash the recovery.img, then install the rooting zip and you're good to go !
And if you need help rooting this baby, I can do it for you in 2 hours from now

bOyka8 said:
I don't think so, you can still do it without losing everything.
Just flash the recovery.img, then install the rooting zip and you're good to go !
And if you need help rooting this baby, I can do it for you in 2 hours from now
Click to expand...
Click to collapse
I managed to do a recovery.img of my last configuration.
All ok, except that phone hangs after the OK green circle on PC screen.
Non responding at all, all black.
But reset from 3.5mm jack and all ok again.
Will do another backup from factory setings, just in case...
what happens after installing CWM Recovery?
can work as normal with phone?
Thanks for 2h supporting

problem!!
bOyka8 said:
I don't think so, you can still do it without losing everything.
Just flash the recovery.img, then install the rooting zip and you're good to go !
And if you need help rooting this baby, I can do it for you in 2 hours from now
Click to expand...
Click to collapse
Well, something bad happened.
Afetr the backup opperation tha finished OK, it has a wrong behaviour with battery icon.
Sometimes show the pugged icon and others a ray inside.
When turn off, it finish ok and then vibrates, but a few seconds later the battery icon charging fills the scren (unplugged of course) and few seconds later disappears.
Not a big problem, but after it I tried a second backup after factory settings restore and this time when plug USB on phone while pressing "-" nothing happens. PC do nothing (not installing drivers as before) and flash_tool can't finish the last part of procedure.
I even used differnt cable but nothing. USB parameters are as suggested....
Please help!
Thanks

"Q" said:
Well, something bad happened.
Afetr the backup opperation tha finished OK, it has a wrong behaviour with battery icon.
Sometimes show the pugged icon and others a ray inside.
When turn off, it finish ok and then vibrates, but a few seconds later the battery icon charging fills the scren (unplugged of course) and few seconds later disappears.
Not a big problem, but after it I tried a second backup after factory settings restore and this time when plug USB on phone while pressing "-" nothing happens. PC do nothing (not installing drivers as before) and flash_tool can't finish the last part of procedure.
I even used differnt cable but nothing. USB parameters are as suggested....
Please help!
Thanks
Click to expand...
Click to collapse
Are you using the correct version of SPFT?
For read back you need the v3... (use -) for download you need v2.... (dont use -)
And yeah with this recovery, and root everything works the same !

fixed
bOyka8 said:
Are you using the correct version of SPFT?
For read back you need the v3... for download you need v2....
And yeah with this recovery, and root everything works the same !
Click to expand...
Click to collapse
Fixed!!
Nothing worked to make it responding to USB...
Cables ok, config of USB ok too....
Decided opening phone and release power from battery cables.
I have never did it before but succeed on it
Now repeated opperation and made a successful backup in factory settings
Again I had to reset from 3.5mm jack
All ok, no problems (perhaps battery icon, but not sure)
Will continue rooting later

[ROM] Flashing the Starmobile Crystal with I-Mobiles IQ2 T18 Official ROM

***!!!WARNING!!!***
THIS WILL DEFINITELY VOID YOUR WARRANTY
BACK-UP YOUR CURRENT ROM (THIS IS A MUST!)
THIS PROCESS WILL ERASE ALL THE USER DATA ON YOUR PHONE! CREATE A BACK UP OF YOUR CONTACTS, IMPORTANT DOCS, EMAILS, MESSAGES, etc.
DISCLAIMER:
Do the following at your own risks. I will not be responsible if anything happens to your device. Steps are provided as a guide to help you
flash a different rom to your Starmobile Crystal. I've personally just tried using the procedure below for only 3 times but they were all
successful. ***Ultimately YOU are responsible for your own actions.***
HI TO ALL CRYSTAL USERS!
Here is a *translated* guide on how to flash the i-Mobile IQ2's latest T18 firmware to our Starmobile Crystal.
You don't need to have a rooted phone for this procedure.
I couldn't find a changelog for the T18 version so I'll just share the differences that I've noticed after flashing the ROM:
* A new setting for GPS could be found under Location services call GPS EPO --
-- Its a MediaTek proprietary off-line server based A-GPS technology. It supports up to 30 days satellite orbit prediction, which can
be used to greatly enhance user experience by improving GPS Time To First Fix (TTFF). -- as per the About EPO from the EPO settings in the
phone.
I've noticed an improvement with GPS if this feature is turned on. Before I couldn't get a fix when I'm inside my house but at least now I'm
getting one -- although its within a 200m radius. Works much better out in the open. The only downpart here is you would need to download the
EPO file for it to be effective. What if you're in a life and death situation where there's no way to get wifi or a data connection?
* Interface seems to a lot smoother. (Maybe because there's still a few apps installed)
* Games are a bit less laggy. I've tried Temple Run 2 and O2jAM and I've seen a bit of improvement there.
* Gyro sensor with Temple Run 1 is still not fixed :crying: || All other apps seem to be working fine with it.
* Battery drain is reasonable, just like the crystal's.
* OC'ing / UC'ing is still not possible.. :crying: || Still looking for a compatible kernel / ROM.
* a version of CWM could be flashed using MobileUncle Tools for this firmware! \ (^_^) /
* The T18 firmware has LED flash enabled for video capture -- the T10 version which I initially tried did not.
* THe T10 firmware had a red "x" for sim 2 located at the status bar since I didn't had a sim 2 inserted and I couldn't get it off -- This was
fixed in the T18 firmware.
* Haven't noticed any bugs except when the phone is charging and the battery has a low percentage -- everything becomes laggy! But I did had
the same experience with the Crystals firmware too.
So HERE WE GO -- ONTO THE GUIDE
THINGS THAT YOU WOULD NEED
1.] SP Flash_Tool
2.] i-Mobile IQ2 T18 ROM -- Its technically a T17+ rev.
3.] ADB Drivers, phone drivers - This can be obtained via PdaNet and manually installing the driver from the SP Flash_Tools folder
4.] A computer running on Windows 7
5.] Basic knowledge of flashing ROMS is a plus!
Step 1
* Download all the files below and extract the .rar files into seperate folders *
- Root_with_Restore_by_Bin4ry_v15.7z -
http://www.mediafire.com/?cnnkb7fkjav8b0k
- PdaNetA4013.exe -
http://www.mediafire.com/?30i3p5badhczzhy
- recoveryIQ2v17.img -
http://www.mediafire.com/?8klxfo4q672xxrp
- SP_Flash_Tool_v3.1222.00.rar -
http://www.mediafire.com/?b7c1e88teokmnkb
- i-Mobile IQ2 T18 update -
https://docs.google.com/file/d/0B7V7eS44lBLedXNWeUEtRktMUlk/edit?usp=sharing&pli=1
Step 2
* Install the USB drivers of your phone. *
Installing ADB drivers via PdaNet
- Install PdaNet and when asked if you would like to install the drivers - select yes > Other > OK;
- If you get a pop up that the driver is not signed, just select install anyway. You'll be prompted to connect your phone to
your PC - do so. Once installation is complete, you can unplug your phone
Installing the Drivers for the Preloader
- Turn off your phone, remove the battery and connect your phone to your PC.
- On your computer, go to Control Panel > Device Manager and look for the USB driver for MT65xx Preloader (this flashes on and
off every 5 secs or so) then right click it and select Update Driver.
- Select the "Browse option" > "Let me pick.." > Let the Show all devices highlighted then click Next > Have Disk then navigate
to the folder where you extracted SP Flash_Tools
- Open the folder > Open new usb driver > Open the Win7 folder and select usb2ser_Win7 for 32-bit systems and usb2ser_Win764
for 64-bit
- Let the drivers install. Once done, unplug the USB cable from your phone.
Step 3
* Flashing the ROM *
- Open flash_tool.exe from the SP Flash_Tool folder
- Once you have the program loaded, click on Scatter-loading found at the right hand side buttons of the interface
- Navigate to the directory where you extracted the T18 ROM and open the IQ2 LBAMW01.1.0.1.2T18A1229_M121 folder
- There should only be one file here -- MT6577_Android_scatter_emmc; Go ahead and open it.
- Click the Format button at the upper left portion of the Interface; Dont change any setting on the pop-up window, just click OK
- Connect the USB cable to the phone (battery should still be removed) and wait for the status bar fill up and go back to 0%. Unplug your phone immediately and stop the process by clicking the button to the right of the Download button at the top of the interface.
- Click on the Download button > re-attach the battery to your phone and then connect the USB cable back to the phone.
- Flashing of the ROM would take place at this point - DO NOT INTERRUPT! It should only take 3-6 minutes to complete.
- You'll know that flashing was successful once you see a pop-up box with a "green" circle. You wont miss it - seriously!
- You can unplug your phone from the pc and turn it on. You should see a green i-mobile logo instead of the Starmobile logo.
- The phone would take a while to boot up after updating, don't worry -- its normal.
Step 4
* Root your phone!!! *
- You can follow the Rooting guide for Starmobile Astra here by OP
http://forum.xda-developers.com/showthread.php?t=1998965
Step 5
* Install CWM Recovery *
- Follow the guide on how to Install CWM on the Astra except use the file recoveryIQ2v17.img from the downloads list
That should be it! Enjoy using your IQ2 phone! If you do find problems or have a better way of getting this done -- please share it with
everyone. This guide was translated from http://droidfriend.com/forums/index.php?topic=1001.0 by Comdevx.
*Note* After installing CWM, it would be best to boot into recovery and format data / wipe cache / wipe dalvik cache before using the phone.
========================================================================================================
everything happens for a reason.

Adding Tweaks for build.prop -- You can follow this steps to turn off camera shutter sound since this official ROM does not have the option to:
guide taken from androidforums*com by n0ve
1- Open up any file explorer app, I use Root Explorer, ES file explorer is fine as well, (free in app store).
2- Click to mount system as R/W.
3- Navigate to /system
4- Longpress on build.prop. -> Tap Open With -> Tap Text Editor.
5- Scroll down towards the bottom where You should see: # #ADDITIONAL_BUILD_PROPERTIES
6- Nine lines down is: ro.camera.sound.forced=1
7- Change =1 to =0.
8- Tap your menu key -> Tap Save/Exit (your build.prop will automatically be backed up as build.prop.bak If using Root Explorer. If using other apps, I suggest making a copy of your original build.prop, rename it to build.prop.bak, then edit the original Build.Prop.
9- Reboot your phone.
Now, once you place your phone in silent mode, it will stay silent.
Now, I've also tried to edit these fields to change Model number and Build number on the Settings > About phone screen.
ro.build.sim.version=Starmobile Crystal
ro.product.model=Starmobile Crystal

How to backup the stock ROM?
Hi
I want to try this TUT ,but before that, I would just like to know how you backed up your StarmobileCrystal stock ROM?

hi I tried this But it seems im stuck Step 3 -- Connect the USB cable to the phone (battery should still be removed) and wait for the status bar fill up and go back to 0%. Unplug your phone immediately and stop the process by clicking the button to the right of the Download button at the top of the interface. It stops while it's filling up the bar. And this pops up
"BROM ERROR : S_FT_DA_NO_RESPONSE (4001)
DA didn't send response data to FlashTool! "
I have tried a dozen times but i cant seem to figure out what's the problem.
Thanks!!

Dear OP,
I flashed T18 succesfully from their Thai website. However, I just noticed after flashing that my orientation and magnetic sensors are no longer working. when i checked the specs of Starmobile Crystal, it says it has G sensor. Checking also my crystal, it says it has yamaha 530 magnetic and orientation sensors. I just want to know if you were able to extract the stock ROM of crystal and provide a download link somewhere? I tried to flash my stock ROM but found out that the preloader bin file is corrupted.
Overall IQ2 T18 edition is an excellent ROM, fast GPS and no bloat apk's. Im just not comfortable seeing that my compass is no longer working.

Here is the Custom rom i.e SENSE based Custom rom released for Star Mobile Astra:
http://forum.xda-developers.com/show....php?t=2247296
Also Contains TWRP recovery.

WORKED!
maki3325 said:
***!!!WARNING!!!***
THIS WILL DEFINITELY VOID YOUR WARRANTY
BACK-UP YOUR CURRENT ROM (THIS IS A MUST!)
THIS PROCESS WILL ERASE ALL THE USER DATA ON YOUR PHONE! CREATE A BACK UP OF YOUR CONTACTS, IMPORTANT DOCS, EMAILS, MESSAGES, etc.
DISCLAIMER:
Do the following at your own risks. I will not be responsible if anything happens to your device. Steps are provided as a guide to help you
flash a different rom to your Starmobile Crystal. I've personally just tried using the procedure below for only 3 times but they were all
successful. ***Ultimately YOU are responsible for your own actions.***
HI TO ALL CRYSTAL USERS!
Here is a *translated* guide on how to flash the i-Mobile IQ2's latest T18 firmware to our Starmobile Crystal.
You don't need to have a rooted phone for this procedure.
I couldn't find a changelog for the T18 version so I'll just share the differences that I've noticed after flashing the ROM:
* A new setting for GPS could be found under Location services call GPS EPO --
-- Its a MediaTek proprietary off-line server based A-GPS technology. It supports up to 30 days satellite orbit prediction, which can
be used to greatly enhance user experience by improving GPS Time To First Fix (TTFF). -- as per the About EPO from the EPO settings in the
phone.
I've noticed an improvement with GPS if this feature is turned on. Before I couldn't get a fix when I'm inside my house but at least now I'm
getting one -- although its within a 200m radius. Works much better out in the open. The only downpart here is you would need to download the
EPO file for it to be effective. What if you're in a life and death situation where there's no way to get wifi or a data connection?
* Interface seems to a lot smoother. (Maybe because there's still a few apps installed)
* Games are a bit less laggy. I've tried Temple Run 2 and O2jAM and I've seen a bit of improvement there.
* Gyro sensor with Temple Run 1 is still not fixed :crying: || All other apps seem to be working fine with it.
* Battery drain is reasonable, just like the crystal's.
* OC'ing / UC'ing is still not possible.. :crying: || Still looking for a compatible kernel / ROM.
* a version of CWM could be flashed using MobileUncle Tools for this firmware! \ (^_^) /
* The T18 firmware has LED flash enabled for video capture -- the T10 version which I initially tried did not.
* THe T10 firmware had a red "x" for sim 2 located at the status bar since I didn't had a sim 2 inserted and I couldn't get it off -- This was
fixed in the T18 firmware.
* Haven't noticed any bugs except when the phone is charging and the battery has a low percentage -- everything becomes laggy! But I did had
the same experience with the Crystals firmware too.
So HERE WE GO -- ONTO THE GUIDE
THINGS THAT YOU WOULD NEED
1.] SP Flash_Tool
2.] i-Mobile IQ2 T18 ROM -- Its technically a T17+ rev.
3.] ADB Drivers, phone drivers - This can be obtained via PdaNet and manually installing the driver from the SP Flash_Tools folder
4.] A computer running on Windows 7
5.] Basic knowledge of flashing ROMS is a plus!
Step 1
* Download all the files below and extract the .rar files into seperate folders *
- Root_with_Restore_by_Bin4ry_v15.7z -
http://www.mediafire.com/?cnnkb7fkjav8b0k
- PdaNetA4013.exe -
http://www.mediafire.com/?30i3p5badhczzhy
- recoveryIQ2v17.img -
http://www.mediafire.com/?8klxfo4q672xxrp
- SP_Flash_Tool_v3.1222.00.rar -
http://www.mediafire.com/?b7c1e88teokmnkb
- i-Mobile IQ2 T18 update -
https://docs.google.com/file/d/0B7V7eS44lBLedXNWeUEtRktMUlk/edit?usp=sharing&pli=1
Step 2
* Install the USB drivers of your phone. *
Installing ADB drivers via PdaNet
- Install PdaNet and when asked if you would like to install the drivers - select yes > Other > OK;
- If you get a pop up that the driver is not signed, just select install anyway. You'll be prompted to connect your phone to
your PC - do so. Once installation is complete, you can unplug your phone
Installing the Drivers for the Preloader
- Turn off your phone, remove the battery and connect your phone to your PC.
- On your computer, go to Control Panel > Device Manager and look for the USB driver for MT65xx Preloader (this flashes on and
off every 5 secs or so) then right click it and select Update Driver.
- Select the "Browse option" > "Let me pick.." > Let the Show all devices highlighted then click Next > Have Disk then navigate
to the folder where you extracted SP Flash_Tools
- Open the folder > Open new usb driver > Open the Win7 folder and select usb2ser_Win7 for 32-bit systems and usb2ser_Win764
for 64-bit
- Let the drivers install. Once done, unplug the USB cable from your phone.
Step 3
* Flashing the ROM *
- Open flash_tool.exe from the SP Flash_Tool folder
- Once you have the program loaded, click on Scatter-loading found at the right hand side buttons of the interface
- Navigate to the directory where you extracted the T18 ROM and open the IQ2 LBAMW01.1.0.1.2T18A1229_M121 folder
- There should only be one file here -- MT6577_Android_scatter_emmc; Go ahead and open it.
- Click the Format button at the upper left portion of the Interface; Dont change any setting on the pop-up window, just click OK
- Connect the USB cable to the phone (battery should still be removed) and wait for the status bar fill up and go back to 0%. Unplug your phone immediately and stop the process by clicking the button to the right of the Download button at the top of the interface.
- Click on the Download button > re-attach the battery to your phone and then connect the USB cable back to the phone.
- Flashing of the ROM would take place at this point - DO NOT INTERRUPT! It should only take 3-6 minutes to complete.
- You'll know that flashing was successful once you see a pop-up box with a "green" circle. You wont miss it - seriously!
- You can unplug your phone from the pc and turn it on. You should see a green i-mobile logo instead of the Starmobile logo.
- The phone would take a while to boot up after updating, don't worry -- its normal.
Step 4
* Root your phone!!! *
- You can follow the Rooting guide for Starmobile Astra here by OP
http://forum.xda-developers.com/showthread.php?t=1998965
Step 5
* Install CWM Recovery *
- Follow the guide on how to Install CWM on the Astra except use the file recoveryIQ2v17.img from the downloads list
That should be it! Enjoy using your IQ2 phone! If you do find problems or have a better way of getting this done -- please share it with
everyone. This guide was translated from http://droidfriend.com/forums/index.php?topic=1001.0 by Comdevx.
*Note* After installing CWM, it would be best to boot into recovery and format data / wipe cache / wipe dalvik cache before using the phone.
========================================================================================================
everything happens for a reason.
Click to expand...
Click to collapse
My first time doing this! It worked! Thanks
But one question though, what if i wanna bring it back to the old starmobile crystal rom, how do i do that?

HELP
So i might have overlooked your post and forgot to backup my Stock ROM! I know you said it's a must, and unfortunately that's the only thing i did wrong. If you do have backup files, or if there are any sites where i can download them, please please share it.. Thanks very much!

Good information
Thanks

Jelly Bean?
I hope Android 4.2.2 will coming soon
Your post is very :good:

crystal
eto po ba ung latest? naka custom rom po kasi ako ng galaxy nexus at gusto ko bumalik sa stock rom. rooted na po cp ko at may nandroid back up ako via CWM. paano po dapat gagawin ko?
maki3325 said:
***!!!WARNING!!!***
THIS WILL DEFINITELY VOID YOUR WARRANTY
BACK-UP YOUR CURRENT ROM (THIS IS A MUST!)
THIS PROCESS WILL ERASE ALL THE USER DATA ON YOUR PHONE! CREATE A BACK UP OF YOUR CONTACTS, IMPORTANT DOCS, EMAILS, MESSAGES, etc.
DISCLAIMER:
Do the following at your own risks. I will not be responsible if anything happens to your device. Steps are provided as a guide to help you
flash a different rom to your Starmobile Crystal. I've personally just tried using the procedure below for only 3 times but they were all
successful. ***Ultimately YOU are responsible for your own actions.***
HI TO ALL CRYSTAL USERS!
Here is a *translated* guide on how to flash the i-Mobile IQ2's latest T18 firmware to our Starmobile Crystal.
You don't need to have a rooted phone for this procedure.
I couldn't find a changelog for the T18 version so I'll just share the differences that I've noticed after flashing the ROM:
* A new setting for GPS could be found under Location services call GPS EPO --
-- Its a MediaTek proprietary off-line server based A-GPS technology. It supports up to 30 days satellite orbit prediction, which can
be used to greatly enhance user experience by improving GPS Time To First Fix (TTFF). -- as per the About EPO from the EPO settings in the
phone.
I've noticed an improvement with GPS if this feature is turned on. Before I couldn't get a fix when I'm inside my house but at least now I'm
getting one -- although its within a 200m radius. Works much better out in the open. The only downpart here is you would need to download the
EPO file for it to be effective. What if you're in a life and death situation where there's no way to get wifi or a data connection?
* Interface seems to a lot smoother. (Maybe because there's still a few apps installed)
* Games are a bit less laggy. I've tried Temple Run 2 and O2jAM and I've seen a bit of improvement there.
* Gyro sensor with Temple Run 1 is still not fixed :crying: || All other apps seem to be working fine with it.
* Battery drain is reasonable, just like the crystal's.
* OC'ing / UC'ing is still not possible.. :crying: || Still looking for a compatible kernel / ROM.
* a version of CWM could be flashed using MobileUncle Tools for this firmware! \ (^_^) /
* The T18 firmware has LED flash enabled for video capture -- the T10 version which I initially tried did not.
* THe T10 firmware had a red "x" for sim 2 located at the status bar since I didn't had a sim 2 inserted and I couldn't get it off -- This was
fixed in the T18 firmware.
* Haven't noticed any bugs except when the phone is charging and the battery has a low percentage -- everything becomes laggy! But I did had
the same experience with the Crystals firmware too.
So HERE WE GO -- ONTO THE GUIDE
THINGS THAT YOU WOULD NEED
1.] SP Flash_Tool
2.] i-Mobile IQ2 T18 ROM -- Its technically a T17+ rev.
3.] ADB Drivers, phone drivers - This can be obtained via PdaNet and manually installing the driver from the SP Flash_Tools folder
4.] A computer running on Windows 7
5.] Basic knowledge of flashing ROMS is a plus!
Step 1
* Download all the files below and extract the .rar files into seperate folders *
- Root_with_Restore_by_Bin4ry_v15.7z -
http://www.mediafire.com/?cnnkb7fkjav8b0k
- PdaNetA4013.exe -
http://www.mediafire.com/?30i3p5badhczzhy
- recoveryIQ2v17.img -
http://www.mediafire.com/?8klxfo4q672xxrp
- SP_Flash_Tool_v3.1222.00.rar -
http://www.mediafire.com/?b7c1e88teokmnkb
- i-Mobile IQ2 T18 update -
https://docs.google.com/file/d/0B7V7eS44lBLedXNWeUEtRktMUlk/edit?usp=sharing&pli=1
Step 2
* Install the USB drivers of your phone. *
Installing ADB drivers via PdaNet
- Install PdaNet and when asked if you would like to install the drivers - select yes > Other > OK;
- If you get a pop up that the driver is not signed, just select install anyway. You'll be prompted to connect your phone to
your PC - do so. Once installation is complete, you can unplug your phone
Installing the Drivers for the Preloader
- Turn off your phone, remove the battery and connect your phone to your PC.
- On your computer, go to Control Panel > Device Manager and look for the USB driver for MT65xx Preloader (this flashes on and
off every 5 secs or so) then right click it and select Update Driver.
- Select the "Browse option" > "Let me pick.." > Let the Show all devices highlighted then click Next > Have Disk then navigate
to the folder where you extracted SP Flash_Tools
- Open the folder > Open new usb driver > Open the Win7 folder and select usb2ser_Win7 for 32-bit systems and usb2ser_Win764
for 64-bit
- Let the drivers install. Once done, unplug the USB cable from your phone.
Step 3
* Flashing the ROM *
- Open flash_tool.exe from the SP Flash_Tool folder
- Once you have the program loaded, click on Scatter-loading found at the right hand side buttons of the interface
- Navigate to the directory where you extracted the T18 ROM and open the IQ2 LBAMW01.1.0.1.2T18A1229_M121 folder
- There should only be one file here -- MT6577_Android_scatter_emmc; Go ahead and open it.
- Click the Format button at the upper left portion of the Interface; Dont change any setting on the pop-up window, just click OK
- Connect the USB cable to the phone (battery should still be removed) and wait for the status bar fill up and go back to 0%. Unplug your phone immediately and stop the process by clicking the button to the right of the Download button at the top of the interface.
- Click on the Download button > re-attach the battery to your phone and then connect the USB cable back to the phone.
- Flashing of the ROM would take place at this point - DO NOT INTERRUPT! It should only take 3-6 minutes to complete.
- You'll know that flashing was successful once you see a pop-up box with a "green" circle. You wont miss it - seriously!
- You can unplug your phone from the pc and turn it on. You should see a green i-mobile logo instead of the Starmobile logo.
- The phone would take a while to boot up after updating, don't worry -- its normal.
Step 4
* Root your phone!!! *
- You can follow the Rooting guide for Starmobile Astra here by OP
http://forum.xda-developers.com/showthread.php?t=1998965
Step 5
* Install CWM Recovery *
- Follow the guide on how to Install CWM on the Astra except use the file recoveryIQ2v17.img from the downloads list
That should be it! Enjoy using your IQ2 phone! If you do find problems or have a better way of getting this done -- please share it with
everyone. This guide was translated from http://droidfriend.com/forums/index.php?topic=1001.0 by Comdevx.
*Note* After installing CWM, it would be best to boot into recovery and format data / wipe cache / wipe dalvik cache before using the phone.
========================================================================================================
everything happens for a reason.
Click to expand...
Click to collapse

[TOOL]MotoTool[Beta v1.4.9.9][21-04-2020]

Getting Started​- This is a simple Tool for MotoTool for Motorola Moto Devices (Beckham, Doha, Lake, River, Evert, Sanders, Potter, Lima) - (All variants), here you will be able to Boot TWRP, flash any firmware that you want and debloat all apps too!
Prerequisites
* You must have NetFramework 4+ installed on your PC * Net Framework
* Windows 8+ 64 Bits
Install
-Start the "MotoTool_v1.4.9.9_Setup.exe"
- The installer will create a desktop shortcut and in Windows app will create a folder with the tool inside.
- When the installer ends, will ask you if you want to launch the Tool and if you want to isntall MotoDrivers. Please if you dont have MotoDrivers installed or you dont know, dont uncheck the option and let the install do it![/B]
How it works?
- The installation will create a "MotoTool" shortcut on desktop
- When you launch the Tool on the first time this will:
-- unpack on "C:\adb" fastboot&adb
-- launch a batch file: **You must accept this, because will remove unnecesary Moto Device Manager to save storage! If you don´t accept this, when you start again the Tool on next launch, will be asking you again! so i recommend you to accept it!**
-- create neccesary folders
-- generate a settings for the Tool. Be careful with this, if you clear the folders, you will lost, TWRP, Firmware, and the Tool settings!
- You must have to be enable usb debugging on your device so the Tool can work!, and IMPORTANT have Bootloader unlocked to use the options like Boot TWRP or flash any Firmware!
- Then you can use any option, remember if you want to download any file, this will check internet connection, if it´s null the tool will reset and restart the Tool!
- If you want to boot TWRP, this will be downloaded (when download finish, click again the option!) and flashed, but remember to put your device on Bootloader mode!
- Themes, the default style it´s dark, so the Tool on the first start will be by default dark, if you want to change it go to "Tool Extras" and select light screen, but be carefoul with your eyes! light Theme it´s so brightness!
Downloads and info
- Download
- Changelog
Source:
- Source-GitHub
- More Info and Help
Tool BetaVersion: v1.4.9.9
Tool Preview Version: ---

franTW said:
Getting Started​
- This is a simple Tool for Motorola Moto Z3 Play, here you will be able to Boot TWRP, flash any firmware that you want and debloat all apps too!
Prerequisites
* You must have NetFramework 4+ installed on your PC * Net Framework
* Windows 8+ 64 Bits
Install
- Start the "BeckhamTool_v1.0.0.5_Setup.exe"
- The installer will create a desktop shortcut and in Windows app will create a folder with the tool inside.
- When the installer ends, will ask you if you want to launch the Tool and if you want to isntall MotoDrivers. *Please if you dont have MotoDrivers installed or you dont know, dont uncheck the option and let the install do it (WARNING: Uncheck Launch Tool!)
NOTE Setup: if you check the box "Launch BeckhamTool" the Tool will be executed, but setup wont be closed, so restart the Tool for now
How it works?
- The installation will create a "BeckhamTool" shortcut on desktop
- When you launch the Tool on the first time will unpack on "C:\adb" fastboot&adb, and will create neccesary folders and generate a settings for the Tool. Be careful with this, if you clear the folders, you will lost, TWRP, Firmware, and the Tool settings
- You must have to be enable usb debugging on your device so the Tool can work!, and have Bootloader unlocked to use the options like Boot TWRP or flash any Firmware
- Then you can use any option, remember if you want to download any file, this will check internet connection, if its null the tool will reset and restart the Tool!
- If you want to boot TWRP, this will be downloaded (when download finish, click again the option) and flashed, but remember to put your device on Bootloader mode and ready to flash
- Themes, the default style it´s dark, so the Tool on the first start will be by default dark, if you want to change it go to settings icon and change it, but be carefoul with your eyes! Light Theme its so brightness!
Preview
What is this?
This is a pre-release of the Tool, this have new options and functions than Stable don´t, but if you want to use this previews, you are on your own risk of having bugs, and maybe other accidentally errors!
Downloads and info
- Download Stable
- Download Preview
- Source-GitHub
- More Info and Help
- More screenshots
Tool Stable Version: v1.0.0.6
Tool Preview Version: v1.0.0.7-Preview 2
Click to expand...
Click to collapse
I appreciate your work. Hard for me to believe not one single response to your thread. I appreciate it and thank you for your work.

bob24260 said:
I appreciate your work. Hard for me to believe not one single response to your thread. I appreciate it and thank you for your work.
Click to expand...
Click to collapse
Thank you!

I've been missing from the Moto Z3 for 6 months now.
I think it's time to tinker with the Z3Play so I'll give the tool a try.
Even if I know nothing about TRW, custom ROMs and rooting of THIS device.
My previous experience was with LG devices. Which were pretty straight forward.
Sent from my Moto Z3 Play using Tapatalk

Everything that you can do with this app you can do with fastboot which is multiplatform.

QkiZMR said:
Everything that you can do with this app you can do with fastboot which is multiplatform.
Click to expand...
Click to collapse
Yes i know, this Tool its just to make the things easier... everyone can use whatever they want...

does anyone still have this tool i would like to try it for my z3 play

paulhauth25 said:
does anyone still have this tool i would like to try it for my z3 play
Click to expand...
Click to collapse
Click that github link in the first post.
@franTW
Thanks for this nice tool, I just took my Z3 Play out of the drawer, after a year or so.