Belt clip holster that fits Essential - Essential Phone Accessories

Does anyone know of a belt clip holster for another phone that is a good fit for the Essential? I'm not talking about pouch style holsters but the plastic type where a spring or pressure clip at the top holds the phone in place.
The only official one for this phone is from Nagebee. Unfortunately the Nagebee case is hideous garbage and Nagebee intentionally designs the belt clip portion so it can't be used with any other case.
I tried holster clips made for the LGV30 and iPhone X which I thought were about the same size as the Essential but neither even came close to working.
I'm also aware of the universal clip holster but since it leaves 80% of the phone screen exposed when you are using the holster that one is a no go.
Can anybody suggest one that does fit well enough to use?

jhs39 said:
Does anyone know of a belt clip holster for another phone that is a good fit for the Essential? I'm not talking about pouch style holsters but the plastic type where a spring or pressure clip at the top holds the phone in place.
The only official one for this phone is from Nagebee. Unfortunately the Nagebee case is hideous garbage and Nagebee intentionally designs the belt clip portion so it can't be used with any other case.
I tried holster clips made for the LGV30 and iPhone X which I thought were about the same size as the Essential but neither even came close to working.
I'm also aware of the universal clip holster but since it leaves 80% of the phone screen exposed when you are using the holster that one is a no go.
Can anybody suggest one that does fit well enough to use?
Click to expand...
Click to collapse
Yep, I have this. It even works without the case. https://www.reddit.com/r/essential/comments/7z1vp7/holster_for_tudia_case/?utm_source=reddit-android
Sent from my PH-1 using Tapatalk

cfclay said:
Yep, I have this. It even works without the case. https://www.reddit.com/r/essential/comments/7z1vp7/holster_for_tudia_case/?utm_source=reddit-android
Click to expand...
Click to collapse
Thanks. I'll give that one a try.

cfclay said:
Yep, I have this. It even works without the case. https://www.reddit.com/r/essential/comments/7z1vp7/holster_for_tudia_case/?utm_source=reddit-android
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
I ordered the belt clip you linked but it isn't nearly wide enough to hold my phone with the Incipio case on it. Are you using this belt clip with a naked Essential phone or with a specific case?

jhs39 said:
I ordered the belt clip you linked but it isn't nearly wide enough to hold my phone with the Incipio case on it. Are you using this belt clip with a naked Essential phone or with a specific case?
Click to expand...
Click to collapse
I works with naked phone and also the slim Tudia case. In that video I have on the Tudia case
Sent from my PH-1 using Tapatalk

cfclay said:
I works with naked phone and also the slim Tudia case. In that video I have on the Tudia case
Click to expand...
Click to collapse
OK. I'll keep that in mind. I didn't realize how much width my case added to the size of the phone. As far as I can tell the iPhone X is the closest in size to the Essential. The iPhone X case I tried previously was made for a slim case so I'm going to try again with an iPhone X holster made for a bulkier case. If that doesn't work then I guess my only options are to use a slim case or learn to love a pouch style holster. Thanks for your help.

I ended up modding a belt clip made for the iPhoneX with an Otterbox case. The clip was too large but fits pretty well with a pair of small felt bumpers (made for cabinets and drawers I think) stuffed in the bottom corners. The iPhoneX clip made for a naked iPhoneX was too narrow with my bulky Incipio DualShock Case but probably works with a naked Essential or slim case because the dimensions of the two phones are pretty close. If anyone knows of a belt clip that is a better fit with my case let me know. There are other iPhoneX clips made for different cases but I don't know what would be the best fit because it seems to be impossible to get accurate dimensions. The one I'm currently using works at least but the fact that one iPhoneX clip was too small and another too big makes me think there is one in the middle that is probably a near perfect fit.

Has anyone tried this Holster with Clip? https://www.ebay.com/itm/Essential-Phone-PH-1-Shockproof-Belt-Clip-Holster-Case-Cover-Screen-Protector
Does anyone know if it will work without the screen protector?
Thanks!

Zargone said:
Has anyone tried this Holster with Clip? https://www.ebay.com/itm/Essential-...Belt-Clip-Holster-Case-Cover-Screen-Protector
Does anyone know if it will work without the screen protector?
Thanks!
Click to expand...
Click to collapse
I bought that from Amazon but returned it because it was hideously ugly. I think the screen protector was separate and optional.

In case anybody is interested: the PH-1 in the Poetic Karbon Shield Black Case (Carbon Fiber Texture) fits perfectly in the iPhoneX Encased Belt Clip Holster for Spigen Neo Hybrid Case.
That's a very thin case and I personally wasn't comfortable with the grip.
I also used that same belt clip with the Tudia Ceramic Feel Glost Case which I liked better. That fits in the belt clip holster but is a tiny bit too tall. Since more pressure is being placed on the spring clip than it was designed for I was concerned that the clip might eventually fail sending my phone crashing to the pavement. I ended up returning to my original configuration--the Incipio DualPro Case and slightly modded belt clip for iPhoneX with Otterbox Defender Case because that felt like a more secure combination to me. I have zero concern that the belt clip holster will fail and I prefer the grip and protection of a bulky case.
But if you use a very slim case the belt clip I used with the Karbon Shield would probably provide an excellent fit.

iPhone X Encased Belt Clip Holster for Otterbox Commuter Case turns out to be a very good fit for the PH-1 in the Incipio DualPro Case. It will probably work with other bulky style PH-1 cases as well. After a lot of trial and error, this is the best fit I've come across for my favorite PH-1 case.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

Otterbox or Ballistic Case

Hi,
I would really like to get your opinions on which case I must buy for the Infuse. I've always use the Otterbox for my previous phones and now, I just saw the Ballistic HC/SG cases. After reading opinions on the web, it seems that they both offer reliable protection.
My question is : What case would you reccommend? The Otterbox Defender or the Ballistic HC/SG Case? Can you provide the reason also?
Thanks!
I have the Ballistic case. It's a bit bulky and weighted, however, it's a great case. I've never used the otterbox so I can't compare the two. Basically, if you want your phone protected I'd recommend it, otherwise its a turn off because it covers up such a beautiful phone. You lose the slimness and the lightness of the phone with the case.
I have both and in "my opinion" the Otterbox is by far much better fit not as bulky side buttons are easier to use and built in screen protector is better.
Thanks for the reply. The Ballistic has some bumps on the 4 corners which seem to protect the phone if ever it falls. 1987dram, does it feel big in the pockets? Also, is the silicone on the Ballistic loose and comes out at time - it seems there are small holes on the rubber case for the silicone to grip, but isn't that loose?
I have a Zagg shield on my screen, will it interfere with the Ballistic protection screen?
I have both so here is my input. If you want a case that is pocket friendly Oterbox all the way. One thing I hated about the HD case is that it would stick to my pocket when I took it out and put it in. Another thing that pushed me away from the HD case is that stuff would always get inside the screen protector and I would have to clean it daily. I have never had that problem with the Otterbox. So basically if your constently droping your phone go with HD, but you almost always have to use the holster because it is NOT pocket friendly.
Edit: Forgot something.
On the HD case the little holes only get loose around the corners. The Otterbox has a ridge design that goes all around the case preventing that. You would also have to take the screen protector off your phone or the screen protector off the case or you will get water marks.
Link to the place I bought my Otterbox.
Link to the place I bought my HD case.
otter box or ballistic
I also have both and I ended up selling the ballistic case. The fit and finish on the the otterbox is better the ballistic case ( the outside wrap) If you take your phone out more than 2 stretches the case. And because of the button parts I had to trim the rubber inside for the volume rocker. Just my .02 cents.
Thanks for everyone's input! I'm going for the Otterbox since it seems to offer better protection and is more appealing to look at.
not the ballistic case
it fits loosely and the buttons don't line up very well
otterbox is quality
I have the Ballistics case and have tried the otter box. I have the Ballistic with clip just because the phone is too big to put in my pocket. I dont know you some of you got a bad case or i just got lucky, I take my case apart to clean every weekend, I have no problems with the rubber stretching or coming out of the holes, if I want to put in pocket I can take the rubber off. The under case is plastic with no rubber, so sticking in my pocket is no problem. I know the cheaper version of the case has rubber with plastic around it but not on the corners. I dropped my infuse 10ft off ladder onto concrete, no damage to case or phone, bet you cant say that with the otter box. I use a screen protecter on my phone also, no bubble issue either. No button issues. I say Ballistics case all the way, but that my opinion.
The otterbox is the way to go I have had the balistic and the diffender and the defender is the way to go IMOP
samsung infuse running MIUI
Otterbox all the way.
Sent from my SAMSUNG-SGH-I997 using xda premium
1 question again, which hard rubber case is made up of higher quality material : Ballistic HC or Otterbox?
Otterbox difenter has the better build quality.
samsung infuse running MIUI
new egg has the otterbox defender for 31 with free shipping.
I had an Otterbox for a year on my HTC Evo and loved it. This time around I went with the Ballistic HC case because it's two cases in one. You can leave the big rubber on for super protection or off so it's smaller and slick looking.
I love my Ballistic HC case and I wouldn't trade it for any other case on the market. The material it's made of it better than what Otterbox uses. The rubber is much nicer IMO.
I paid $50 for it on Amazon. (I opted for the next day air shipping because I'm impatient) http://www.amazon.com/gp/product/B005BTBGEO
Some pictures:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
More pictures of phones, including my new Infuse and the old Otterbox protected Evo: https://picasaweb.google.com/109136396104030084187/Phones#
BALLISTIC ALL THE WAY!
Returned three Ballistic cases due to poor button alignment.
Used/use BodyGlove soft gel with Platinum holster most often, but did purchase Otterbox Defender finally when it came out from Buy.com for $27.99.
Otterbox fit is perfect like four previous models I've own/own, but for some reason the screen cover seems to be more succeptible to scratches than earlier units.
Called Ballistic CS about button alignment and they acknowledged issue with some batches, but would only tell me to "try again" by returning to store.
Call Otterbox about problem and they'll send entire replacement with no questions.
Thank you ...........ز
Final5k said:
Hi,
I would really like to get your opinions on which case I must buy for the Infuse. I've always use the Otterbox for my previous phones and now, I just saw the Ballistic HC/SG cases. After reading opinions on the web, it seems that they both offer reliable protection.
My question is : What case would you reccommend? The Otterbox Defender or the Ballistic HC/SG Case? Can you provide the reason also?
Thanks!
Click to expand...
Click to collapse
Both are good, But i found Otterbox is good and much effective compared to ballistic cases. Check this out, I bought one Otterbox Cases from sfplanet.com where i got 30% savings in its original price by using the coupon code "OTT30OFF" and free shipping also!
I have the ballistic case and do not like it. It seems to nearly double the size of the phone and the front plastic window distorts the screen. Additionally the rubber outer sleeve does not fit well and comes loose in places. Also it makes the side buttons nearly impossible to use. Hope this helps.
I really like the Ballistic. Saved my phone a few times.
But as was stated, it's hard to use the side buttons. What I did was slip a real thin piece of cardboard between the rubber power button and the Infuse's power button. Now all the buttons work perfectly. You may have to adjust the position of the cardboard.
I'm planning my escape from the digital world!

THIN case

Whats the thinnest case you have found for the S4? I've been looking at various cases, and they are all so thick ( I usually go naked.. ) but I would like to put something over it for drop protection ( so no, skins don't work ). And don't suggest any of the crap offered by SPIGEN, I'm done with that worthless company ( ALL support issues with them ).
ITSkins has the ghost and Zero.3, but neither is available STILL ( they where suppose to be on the 15th ) and you can't pre-order them either....
Everything else i find just says "Thin" or some other wonderful adj, I'd like a number and facts. Thin is subjective....
rkennison said:
Whats the thinnest case you have found for the S4? I've been looking at various cases, and they are all so thick ( I usually go naked.. ) but I would like to put something over it for drop protection ( so no, skins don't work ). And don't suggest any of the crap offered by SPIGEN, I'm done with that worthless company ( ALL support issues with them ).
ITSkins has the ghost and Zero.3, but neither is available STILL ( they where suppose to be on the 15th ) and you can't pre-order them either....
Everything else i find just says "Thin" or some other wonderful adj, I'd like a number and facts. Thin is subjective....
Click to expand...
Click to collapse
I have the case mate barely there case. I have to say, it feels so nice in the hand.. Because of the matt finish. Better than any other case I had. And I also had the spigen neo hybrid. The look is also casual. Really like the style.
Here some foto's I just took.
Hope it helps.
Regards
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Verstuurd van mijn GT-I9505 met Tapatalk
I have the ringke rearth slim and it looks similar to the barely there above but even thinner (by the looks of his pics). Not much protection but improves grip and barely any if at all bulking up of the phone
Sent from my SGH-M919 using xda premium
i have this tpu case that to me doesnt feel like it adds any weight or thickness to the phone itself. http://www.amazon.com/gp/product/B00BYPZU28/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
here are some pics to show you what i mean. notice 2 of these pics you can see how the case works well with the mime ghost glass screen protector. it's also partially see through.
found this on ebay
Clear 0.3mm Ultra Thin Cover Case Screen Guard for Samsung Galaxy S4 i9500
This 0.3 case covers the top and bottom edges too, this will be the thinnest you can find on the market with a full protection. I've one when i'm using my S3, looking for a S4 one and found this.:good:
Sent from gala,y s4
hollisterryann said:
Definitely neo hybrid by spigen. Thing adds Like no thickness
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
I agree. It doesn't add anything thickness but HOWEVER, it does add some to the width making the phone feel wider.
He said no neo hybrid
rkennison said:
And don't suggest any of the crap offered by SPIGEN, I'm done with that worthless company ( ALL support issues with them ).
Click to expand...
Click to collapse
After everything I have read about Spigen, I am very hesitant to buy one of their products. The casemate looks pretty nice, but I don't like the openings on the top and bottom. I want a thin/light case, but I want a little bit of fall protection in it.
I've just got this one, loving it so far.
http://www.amazon.co.uk/gp/aw/d/B00BYMGQVU/ref=mp_s_a_1_2?qid=1369333383&sr=8-2&pi=SL75
Sent from my GT-I9505 using Tapatalk 2
Serious recommendation: I was in the same boat, and didn't think I would find anything I liked. I happened to be browsing at BestBuy while my wife picked out case. I noticed some RocketFish branded cases that look really slim. Asked if I could try one on my phone and it fit like a glove, barely added any size to it, but definitely makes it feel like I'm not going to accidentally fling the phone across the roam just taking it out of my pocket.
I also have the Ringke Rearth ultra slim case - which was not only the thinnest I've seen, but also very cheap!
I keep the Spigen Neo-Hybrid case on my phone though - I had an S3 get nicked up at the bottom where the ultra thin rearth case didn't cover. Outside of the neo-hybrid I think the rearth cases are my favorites - considering I bought one for my S4 immediately and had one for my S3 I'd feel confident suggesting it.
I purchased both the Ringke Rearth Slim and the Spigen Neo Hybrid. While the Spigen looks nice it really does add a lot of width to the phone. The Ringke is easily the slimmest case that I have used for any phone. Not to mention it only cost $2. The matte black has also been great for adding grip. My only complaint is that the Ringke case is very difficult to remove.
I have a Spigen Ultrafit. Its pretty darn thin.
I like the matte finish.
Spigen Ultrafit
Edit: it is just thick enough the effectively recess the buttons to protect them from drops, plus it works with a tempered glass screen protector. AND...its only $10 shipped with Prime.
what is the point of cases that dont cover the top and bottom? my dad's s3 has one of those and it got destroyed on the bottom from a small drop
RTbar said:
what is the point of cases that dont cover the top and bottom? my dad's s3 has one of those and it got destroyed on the bottom from a small drop
Click to expand...
Click to collapse
It would have to hit a very uneven surface...the corners are protected. You would have to drop in on gravel or a curb or something like a car door sill. If you drop in on tile or flat concrete it is impossible to hit the edge because of the gap created by the corners. I prefer minimal protection. My main concern is really protecting the corners back and front since those are what are going to hit 99% of the time. And the buttons...you can break the board connections (trust me I know, lol) if the phone lands on its buttons. I actually was thinking of going naked since the battery door can be replaced so easily and it is the entire back. Just a screen protector and a replaceable back. I have insurance. Also, I am a middle aged dad...I am not in the situations that you would drop a phone that often.
All that being said I will probably get another case at some point just because, lol.
I have the Body Glove phone case. Made of soft rubber for a nice all around grip. I purchased it at Walmart for $15. Link is for image of the case.
http://www.radioshack.com/product/i...gclid=CJD57O6KsrcCFRSN7AodYUMAAA&gclsrc=ds.ds
I had this case for my S3 and loved it......anyone know if there's a case just like this for the S4? I keep my phone in my pocket so I prefer the headphone jack and the charging port to be covered unless I'm using them.
theroyalwe said:
I also have the Ringke Rearth ultra slim case - which was not only the thinnest I've seen, but also very cheap!
I keep the Spigen Neo-Hybrid case on my phone though - I had an S3 get nicked up at the bottom where the ultra thin rearth case didn't cover. Outside of the neo-hybrid I think the rearth cases are my favorites - considering I bought one for my S4 immediately and had one for my S3 I'd feel confident suggesting it.
Click to expand...
Click to collapse
Supposedly the neo-hybrid makes the headphone jack extremely small though...I LOVE the look of that case, but as a Beats user, I'm afraid :crying:
DBA Cases has a thin case that is avaliable in six different colors.
sent from my 32gb + 32gb S4
Paradisimo said:
I purchased both the Ringke Rearth Slim and the Spigen Neo Hybrid. While the Spigen looks nice it really does add a lot of width to the phone. The Ringke is easily the slimmest case that I have used for any phone. Not to mention it only cost $2. The matte black has also been great for adding grip. My only complaint is that the Ringke case is very difficult to remove.
Click to expand...
Click to collapse
I have the Ringke. It is very thin. I don't feel like it would do anything to prevent the screen from cracking. It would prevent scratches to the back though.
I now have a Chinese knock off neo hybrid. Add with the genuine. .. Pretty thin on the back but it does make the phone wider. I do feel like this will help obsorb shock in a fall.

Belt cases

Which ones do you guys use/recommend. I would like one with some space so I can try different cases. The one I use doesn't allow for any cases (short of silicone one) since clearances are too tight
Thanks
ptolemy2k6 said:
Which ones do you guys use/recommend. I would like one with some space so I can try different cases. The one I use doesn't allow for any cases (short of silicone one) since clearances are too tight
Thanks
Click to expand...
Click to collapse
I like this one from eBay for ~$10US.
http://www.ebay.com/itm/171026541586?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
It's oversized and I've tried it on my i337 with the Speck CandyShell and CandyShell Grip cases. The Grip is my current fav. I've also tried it with the Seidio Active case.They all fit fine. The Active case fits a little snug due to the kickstand, but it slides out easily enough. This case also has a rotating clip so you can position it vertically or horizontally... or in between which is where I like it.
and orkenhl
speedlever said:
I like this one from eBay for ~$10US.
It's oversized and I've tried it on my i337 with the Speck CandyShell and CandyShell Grip cases. The Grip is my current fav. I've also tried it with the Seidio Active case.They all fit fine. The Active case fits a little snug due to the kickstand, but it slides out easily enough. This case also has a rotating clip so you can position it vertically or horizontally... or in between which is where I like it.
Click to expand...
Click to collapse
OH, thanks!
Does it have belt loop or just a belt clip?
cheers!
ptolemy2k6 said:
OH, thanks!
Does it have belt loop or just a belt clip?
cheers!
Click to expand...
Click to collapse
The link above shows front and rear pics. Clip on the rear.
eigspo collared
speedlever said:
The link above shows front and rear pics. Clip on the rear.
Click to expand...
Click to collapse
I thought so as well. I need the one that has belt look rather than belt clip. Thanks for the help
speedlever said:
I like this one from eBay for ~$10US.
http://www.ebay.com/itm/171026541586?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
It's oversized and I've tried it on my i337 with the Speck CandyShell and CandyShell Grip cases. The Grip is my current fav. I've also tried it with the Seidio Active case.They all fit fine. The Active case fits a little snug due to the kickstand, but it slides out easily enough. This case also has a rotating clip so you can position it vertically or horizontally... or in between which is where I like it.
Click to expand...
Click to collapse
do you by chance know if the linked ebay case will fit an otterbox defender ?
Nite Ize has a nice one.
I just recently picked one up. It fits with my Trident Aegis Case.
http://www.niteize.com/product/Clip-Case-Cargo-Sideways.asp
RipOffs makes holsters as well.
http://ripoffs.com/
wavrunrx said:
do you by chance know if the linked ebay case will fit an otterbox defender ?
Click to expand...
Click to collapse
Sorry, I don't know for sure. But I suspect it will fit fine if it meets the dimensional criteria.
Will fit cell phones up to 5.75" high X 3.0" wide x 0.75" thick per the description.
You can find a nice leather case that fits the S4 at Walmart.. made by "Fellows".
NRGZ28 said:
You can find a nice leather case that fits the S4 at Walmart.. made by "Fellows".
Click to expand...
Click to collapse
the S4 with a case on it ?
I have a cellio slim case on mine from Fry's and it fits in it. Go to walmart.. take out your phone and put it in it before you buy it
speedlever said:
I like this one from eBay for ~$10US.
http://www.ebay.com/itm/171026541586?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
It's oversized and I've tried it on my i337 with the Speck CandyShell and CandyShell Grip cases. The Grip is my current fav. I've also tried it with the Seidio Active case.They all fit fine. The Active case fits a little snug due to the kickstand, but it slides out easily enough. This case also has a rotating clip so you can position it vertically or horizontally... or in between which is where I like it.
Click to expand...
Click to collapse
I picked this one off of ebay as well and just received it today. It's nice case and I like the feel but for me it way too big when used with the SGP Slim Armour. There was just too much play for my liking. I happened to find this one while shopping at my local Staples tonight. It fits the S4 with the Slim Armour case very nicely and still easy to get in and out. They also have a vertical case for the exact same price.
http://www.staples.com/Staples-Executive-Smartphone-Case-Extra-Large-Horizontal/product_132408#revs_content
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Seidio case & belt clip combo

Heads up for anyone looking for a case/beltclip combo. Although i am very happy with my Case mate pop case, I'm gonna order the Seidio as soon as they become available.
http://www.seidioonline.com/SearchResults.asp?Search=galaxy+note+edge&Submit=Search
*Omnipresent* said:
Heads up for anyone looking for a case/beltclip combo. Although i am very happy with my Case mate pop case, I'm gonna order the Seidio as soon as they become available.
http://www.seidioonline.com/SearchResults.asp?Search=galaxy+note+edge&Submit=Search
Click to expand...
Click to collapse
Available starting today! FYI
pdappcgeek said:
Available starting today! FYI
Click to expand...
Click to collapse
This ones says it out now
http://www.seidioonline.com/samsung-galaxy-note-edge-surface-combo-royal-blue-p/bd2-hr3ssnek-rb.htm
The cases are availabe now. I just ordered the surface case & belt clip combo.
Do tell once you get it. I'm interested in well, but I will wait to hear from some of the early adopters. The pictures online look more like design drawings, not actual photos of a note edge in the case.
Just received my surface case/belt clip combo. I really like it so far. Not to thick, not too thin. I'll post some pics and a short review after I get home from work.
seidio case and belt clip
just received my seidio case and belt clip.... loving it ... not bulky and great fit for the note edge...just what i've been looking for.
I will be ordering one too. I have the Verizon clam-shell case and it is very inconvenient to put the phone back in since it is "loaded" sideways. I'm afraid I will drop it putting it back in!
Belt clip holster and case boxes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Belt clip holster and case
Installation is easy. The case comes in 2 parts that slide together and interlock.
Kickstand deployed
Imo, Seidio did a great job. The case is of very good quality and is lighter and thinner than my Casemate pop case. The case itself is made of high impact plastic, with a soft tough rubber coating that feels wonderful to the touch, providing a smooth but good grip. The belt clip holster is made of similar plastic as the case and has a soft felt lining inside to protect your phones display. The belt clip also rotates 180 degrees to the left or right. Your phone can only be inserted face in, right side up. The kickstand is metal and feels sturdy and tucks away flush in the case when not in use. Only complaints are the high price and i wish the kickstand was a little wider.
I give it a 9 out of 10 with 2 thumbs up:good::good:
OK, I ordered one from Android Central tonight. The combo was only $44.95! (On sale I guess) Thanks for posting the pics.
I've had Seidio combo cases in the past and they have consistently been my favorite in function and quality.
Question....I have a right angle headset cord. With all the cases I have so far I had to modify them to get it to stay in firmly. Anyone know if this one is more right angle friendly?
Placement of the mic holes
I have the Verizon Note 4 that I'm swapping out for the Edge. I also have the Seido combo for the Note 4 and the microphone holes on the bottom of the phone don't line up as Verizon slightly changed the placement of the mic. Which variant do you have and if it is the Verizon version, do the holes of the Seido case line up with the mic holes of the case? Thanks in advance.
sold american!
This is just what I have been waiting for. A sturdy case with a kick stand that is not bulky (like the other 3 I purchased). I ordered just the case for 31 bucks off android central. It will be here in a few days. Thanks for yhe heads up.
My case came in the mail saturday .. This is THE case that I haave been looking for. Its thin, adds little to no weight and has a freaking kick stand! Thank you for the introduction to this product .. :good::good:
I just received mine today that I ordered from Newegg last week ($35 for the combo). Overall I have to say this is my favorite case so far ( had a $10 one from Amazon when the phone first came out and the Incipio dual shock pro since that was released).
It is much slimmer than both, which also allows me to use my right angle cord for my headphones(beats-Android version). The kickstand is awesome and its holster is much better than having using the note 2 otterbox, that fit well-but the clip kept breaking...this one is much more sturdy. The buttons are also cutout and are much easier to use. It's also easy to pop on& off, so if u are a spare battery person is a breeze.
The only downfall I see initially is that it is a little slippery for now, but I feel like that will go away as I use it more.
~Sent from my Hyperdriven Edge~
Have to give Seidio Case / Holster combo a + 1 ! :good:
I have used Seidio cases on my last 3 Note series phones,and they have all held up well and are great quality. I had a cheap bulky holster combo on until I received this case, and it REALLY made this phone usable again without the bulk, JMO. I just can't keep a phone in my pocket...
scooterd said:
I have the Verizon Note 4 that I'm swapping out for the Edge. I also have the Seido combo for the Note 4 and the microphone holes on the bottom of the phone don't line up as Verizon slightly changed the placement of the mic. Which variant do you have and if it is the Verizon version, do the holes of the Seido case line up with the mic holes of the case? Thanks in advance.
Click to expand...
Click to collapse
Sorry for not being quicker on this... The microphone holes line up perfectly on the top and bottom of the Edge phone using the Edge specific case and holster.
Sent from my SM-N915V using XDA Free mobile app
Soooo my phone took a 9 ft drop onto concrete today. Phone is perfect and the case doesn't even have a scratch on it. I'm loving this case.
Sent from my SM-N915P using Tapatalk
Galaxy Note Edge Case, Verus [Thor]
This case is absolutely one of the best cases I have put on any phone very slim, tight fit and offers very good protection. To top it off it is $19.99 now on amazon! I would have gladly paid $40 easily. I just ordered a gold one when I want to switch from my black one!
http://www.amazon.com/Galaxy-Note-V...+For+Samsung+Galaxy+Note+Edge+SM-N915+Devices

Holsters for LG V30

Similar to the LG V30 "cases" thread -- but specifically for belt holsters/wallet style holder for the LG V30. I do NOT like to stick my phone in my pants pocket, where's there's car keys, coins, etc that may scratch the display. Even with a bumper case, I also use a belt-style holster for my smartphones. My wife uses something similar to stick her phone in her purse, to protect against all the metal objects in there. We both have TPU bumper cases for drops. This is for additional protection when not using the phone and means to carry it.
These are my search parameters, but you can change them... You can narrow to type of material, design, whatever. Right now there's almost a thousand search results and that will probably only increase!
LG V30 HOLSTERS: EBAY LISTINGS -- LOWEST PRICES FIRST, FREE SHIPPING, BUY IT NOW, WORLDWIDE SEARCH.
SOME of the belt style holsters do attach to the back of the phone, so there may some overlap in the "cases" and "holsters" threads -- but I thought this category is also important as it's not the bumper cases or even hybrid cases.
EXAMPLES:
Leather Sideways Holster/Case for Cell Phones COMPATIBLE WITH Otterbox Symmetry (or Otterbox Defender)
$6.34 with FREE shipping
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's a leather belt LG V30 holster that is wide enough to also let you have a bumper case on your phone. Just specify in the drop down menu how big you want "Otterbox Symmetry" big or "Otterbox Defender" big? Of course, prices change, but that's the price right now.
Here's the rugged nylon type my wife likes:
Luxmo Vertical Holster Belt Clip Pouch Holster/Case
$5.95 with FREE shipping
Just specify in the drop down menu you want LG V30.
I usually do the seidio surface/holster combo but they are not out yet.
I snagged this for the belt clip
https://www.amazon.com/gp/product/B0764MK8TT/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
And am using this phone case
https://www.amazon.com/gp/product/B0734ZX4RH/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
They work perfectly together.
steve841 said:
I snagged this for the belt clip
https://www.amazon.com/gp/product/B0764MK8TT/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
And am using this phone case
https://www.amazon.com/gp/product/B0734ZX4RH/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
They work perfectly together.
Click to expand...
Click to collapse
Interesting.
steve841 said:
I snagged this for the belt clip
https://www.amazon.com/gp/product/B0764MK8TT/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
And am using this phone case
https://www.amazon.com/gp/product/B0734ZX4RH/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
They work perfectly together.
Click to expand...
Click to collapse
@steve841 and @ChazzMatt, just wanted to say I bought both of these products and steve841 is right, these go perfectly together. The fit is perfect. It feels really secure.
steve841 said:
I snagged this for the belt clip
https://www.amazon.com/gp/product/B0764MK8TT/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
And am using this phone case
https://www.amazon.com/gp/product/B0734ZX4RH/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
They work perfectly together.
Click to expand...
Click to collapse
Hey, thanks for that. I will not buy this phone without a holster -- I need it for work -- and I hate the thought of running the V30 with an ugly case. Your setup might do the trick until a case-free holster is released.
On that note, I chatted with Seidio and emailed Encased.
They both told me there are no current plans for naked holster (Sedio "Spring Clip" series and Encased "Case Free" series). But the V30 is getting enough strong buzz that I'm counting on there being demand for it.
In the past, I've compared dimensions of other phones and found holsters that were a close enough fit to hold me over. I'm not finding a good candidate for this phone.
WOW
Support Agent
Support Agent
Hello, would you like to talk about any of our products?
Guest
any reason why you will not be making surface cases for the LGV30
I see it for S8 and google hones
I've been using that case on everyone of my phones
Support Agent
We just do not see the market for that device.
Guest
huh its top 3 in the market today top tier phone and ranks with the pixedl 2 xl and note 8
so no holster either than I asume? Read
Support Agent
While that may be true, other phones are selling more. no holster sorry.
Hi
Hey Now! I've got my chosen combo.
For the holster, I picked up the Encased Duraclip that Steve841 linked to above. Note that unlike the Seidio Spring Clip, which has a great and easy to use mechanism to "clip in" and "clip out" the phone in a very fluid motion, this particular Encased holster requires the phone to be slid in lengthwise, and it's a friction fit -- there's no positive latch.
I also tried out faux leather holsters by Goalany and SumacLife from Amazon. The Goalany unit was too room -- it could handle a 3/4" phone or a thick Otterbox case. The SumacLife was a good fit, but not the swiftest to get the phone out.
https://www.encased.com/products/lg...-series-slim-grip-case-belt-clip-smooth-black
I ordered a bunch of cases to try out. Didn't like the Ringke Fusion clear. It's two pieces and as shown in other posts, is going to yellow. The Ringke Onyx was acceptable but I'm not a fan of the raised edge along either side of the screen. The TopAce Ultra Thin was probably my runner up. The case that came with the Encased holster is hard plastic and durable, but interferes slightly with my Tylt Vu charger (I have to slide the phone about 1/2 inch up the incline to get the charger to activate, then I can let it sit in the cradle properly and it charges no problem. Oh -- all of these cases worked well with the Encased holster.
The case I ended up with? The Lumion Huey. It's pretty minimal. The case is every so slightly raised along the top and bottom edges of the phone, but its edges sit a little lower along the sides, unlike the others. It's a compromise of protection for usability. It slides very nicely into the Encased holster, about the same amount of resistance The design along the back reminds me of the Pixels. I really like how they created a symmetric cut-out for the camera and flash -- this design decision makes the other cases look weird. The sides of the case are every so slightly ribbed in the long direction for grip, while enhancing the slide-in / slide-out properties of the holster. All of the cutouts are excellent with the exception of the audio jack, which is just slightly off (visible, but less than a millimeter).
https://www.androidheadlines.com/2017/08/lumion-announces-three-cases-for-the-lg-v30.html
As an aside, I wasn't too sure what to expect of the Huey, but it showed up in a plastic retail display package that looks like it should cost more than the TPU case contained inside!
Just seen this on encased. I am ordering one now.
killakarl said:
Just seen this on encased. I am ordering one now.
Click to expand...
Click to collapse
Ah, thank you but curses! Also available on Amazon for $16, I see.
I have five holsters for other phones in front of me, delivered yesterday from Amazon.
I was just minutes away from transplanting the spring clip from a Seidio iPhone 6 plus holster onto a Seidio holster for the Nexus 6, which would have given me the perfect fit for my V30 in its slim Lumion Huey case.
I'm ordering the Encased holster now, but I'm going to hang on to my collection of others until I receive it, just to hedge my bet.
I am just excited for a spring clip. I absolutely dislike the ones you have to slide. The horizontal clip seems way to finicky. Sometimes I have to use both hands to get it out. So it is an definite for me to have the spring clip. I asked them earlier if they were going to have them and they told me no. So I was pleasantly surprised to see this.
Well poop, the Encased spring clip holster arrived today and it's s no-go with the TPU case I'm using.
I'm sure it's fine with the big, clunky., ugly hard plastic case that's included. With TPU there's a 1/8 gap between the screen and face of holster; it rattles around like mad.
I think I'll have to go with my hybrid Seidio setup of the iPhone 6 plus holster and Nexus 6 clip.
Nay Tyzon said:
Well poop, the Encased spring clip holster arrived today and it's s no-go with the TPU case I'm using.
I'm sure it's fine with the big, clunky., ugly hard plastic case that's included. With TPU there's a 1/8 gap between the screen and face of holster; it rattles around like mad.
I think I'll have to go with my hybrid Seidio setup of the iPhone 6 plus holster and Nexus 6 clip.
Click to expand...
Click to collapse
I don't think the case that came with it was too bulky. But at least the hole for the headphone jack is a little better than the other cases I have. It looks to be off a bit still. But even having smaller cases, I still don't like the wiggle but at least it won't be in my pocket. I dislike having my phone's in my pocket. The spring clip is a must though.
killakarl said:
I don't think the case that came with it was too bulky. But at least the hole for the headphone jack is a little better than the other cases I have. It looks to be off a bit still. But even having smaller cases, I still don't like the wiggle but at least it won't be in my pocket. I dislike having my phone's in my pocket. The spring clip is a must though.
Click to expand...
Click to collapse
I'm using at Lumion Huey TPU case, and it's very similar in dimensions to the other TPU cases I ordered up, made by Ringke and TopACE.
As long as I can find a way to get Seidio's pin removed from, then resecured back into the spring clip hinge, I'll be golden with their iPhone 6 Plus holster for the V30.
Frustrating.
Nay Tyzon said:
I'm using at Lumion Huey TPU case, and it's very similar in dimensions to the other TPU cases I ordered up, made by Ringke and TopACE.
As long as I can find a way to get Seidio's pin removed from, then resecured back into the spring clip hinge, I'll be golden with their iPhone 6 Plus holster for the V30.
Frustrating.
Click to expand...
Click to collapse
You might need a link remover like for a watch band.
My Supcase Unicorn Beetle Pro case has a holster. It's ugly and oldskool 90s like but it's there. I just use it as a stand though for watching videos.
Sent from my LG-H932 using XDA Labs
I'm using my old Note 4 Pdair holster case with my LG V30 WITH the spigen neo hybrid case. Fits pretty good. I'm happy with it
I have this case. i dont use the belt clip/holster but its of good quality and the case is pretty awesome.
https://www.amazon.com/gp/product/B074XGX1TY/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
seang said:
I have this case. i dont use the belt clip/holster but its of good quality and the case is pretty awesome.
https://www.amazon.com/gp/product/B074XGX1TY/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I have the same... Used one in my N6 as well... Great case and holster does work on belt nicely.
---------- Post added at 01:04 PM ---------- Previous post was at 01:03 PM ----------
seang said:
I have this case. i dont use the belt clip/holster but its of good quality and the case is pretty awesome.
https://www.amazon.com/gp/product/B074XGX1TY/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Oh and Seang... If you're not using the holster, you can always send it my way! Lol!

Categories

Resources