I flashed my gear s3 SM-R765V using netOdin. netodin succeded but the watch said it failed. now the watch only boots to download mode. but it doesn't say that the warranty is void just the system is custom. it wont allow any other recovery options but power off. I don't know how to fix this please help!
Same issue here any body ??????
Related
Hi,,,I want to ask how to fix my galaxy s2 since it said firmware upgrade encountered an issue,please select recovery mode in kies,,when I was flashing clockwodmode recovery using odin?I went to kies and connect then click the recovery mode,but my device didn't listed...my s2 can't even turn to download mode,,,,using usb jig still cannot force my s2 turn into download mode,,,,,please guys,,reply me tell me what am gonna do??
Dear XDA Community,
I think my phone is soft-bricked (again). When powering on the device I see the Galaxy S6 logo and then straight after it shuts off (not a boot loop).
Goal: Fix phone via Odin without tripping Samsung KNOX or voiding warranty in any way
[Before] My phone came with Lollipop 5.0.2. I rooted it with Ping-Pong-Root.
[Current] Stock Lollipop 5.1.1
Everything has been perfect until yesterday. A friend of mine enabled KNOX Security and pressed reboot when prompted. The phone was stuck in a boot loop which was fixed by a factory reset via android recovery mode.
Once I had done the factory reset and everything was working, I decided to update my device to the latest firmware Lollipop 5.1.1. I enabled debugging mode. Yesterday I was trying to figure out if I could somehow back up data with adb when it was soft-bricked but the device was not recognized with the abd tool only Odin.
Today I noticed the phone was rebooting randomly. I read a post that said to try "wipe cache partition" which in hindsight I should have just done. Yesterday the option to "apply update from ADB" kept saying "Update from ADB is disabled". Me being inquisitive, I tried the option "apply update from ADB" (with no usb attached) thinking that if it worked this time, I could just cancel it by powering off the device. I was WRONG! This is what led to my current issue.
I have tried wipe data/factory reset like I did yesterday to fix the boot loop to no avail.
Current Status:
ODIN MODE
Product name: SM-G920F
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: OFF
Secure Download: ENABLED
KNOX warranty void 0 (0x0000)
RP SWREV: B:2 K:2 S:2
In the android recovery menu it says at the bottom: " dm-verification failed... "
I have researched into flashing stock firmware. I have already tried Smart Switch with no luck. Once entering in the correct Model name and S / N number I get the error message: “Unable to find the serial number, model name, or IMEI on the server. Please check and try again.”
I have two other options:
Flashing stock firmware via Odin
Taking it back to my local store and sending it in for repairs
My main concern is hard-bricking the device and voiding the warranty.
I have read that flashing stock firmware through Odin will not void the warranty, can anyone please confirm this? I need to be 100% sure.
If I were to flash via Odin, the next obstacle I face is choosing the correct firmware.
I have some screenshots of my “About Device” page from when I was still on 5.0.2.
On the screenshot, it has Baseband version: G920IDVU1AOD1 .
There is a version with: G920IDVU2DOI2 . I assume I should get that one.
My current rom has the official Spark boot loader image, if I were to flash any of those roms, would I lose it?
Can Samsung see a firmware flash counter?
Medium case scenario:
Assuming that flashing via Odin does not trip KNOX, I flash one of the roms and it does not work. Will Samsung refuse to fix the phone if there was a firmware flash count of eg 2?
Worst case scenario:
The flash is successful but hard-bricks the device. KNOX also may be tripped.
Thank you in advance for your support!
Trystan34 said:
Dear XDA Community,
I think my phone is soft-bricked (again). When powering on the device I see the Galaxy S6 logo and then straight after it shuts off (not a boot loop).
Click to expand...
Click to collapse
The Knox counter is not triggered when we flash a stock firmware through Odin, therefore the warranty will not be void.
Uzair40 said:
The Knox counter is not triggered when we flash a stock firmware through Odin, therefore the warranty will not be void.
Click to expand...
Click to collapse
Thank you. I have successfully unbricked my Galaxy S6
how?
Im on the same boat right now.
But device is not being detected via Odin either..
Sorry btw if thread has been dead for a while.
How did you managed to unbrick it btw, would you mind sharing the steps you performed?
Trystan34 said:
Thank you. I have successfully unbricked my Galaxy S6
Click to expand...
Click to collapse
Glad to hear that your problem is solved !
Version of Samsung Galaxy Grand Prime:Galaxy grand prime s920l
I have a soft bricked grand prime, my reactivation lock was still enabled and it's in a constant boot loop.
I can access the recovery mode, attempted to factory reset, clear cache and restore, which did not work.
I can access download mode and connect to Odin with my laptop, yet I can not find my stock room or anything to restore my phone and take it out of the boot loop.
Please help me with this problem, I can't stand looking at my phone which after paying for everything, service and all cost me close to 300 dollars..
Download Samsung Kies and do a emergency firmware update or something like that. Then put your exact phone model, s/n, and sit back and let Kies do its thing
Sent from my SM-G530T using XDA-Developers mobile app
Negative. It does not support my phone model.
Hi,
i got issue stuck in this odin mode.. I just flash Combi_FTMA_R760XXU2BQC2 firmware and NetOdin says: PASS, but S3 show error and say that need do it again.
Now it stay in odin mode downloading... and nothing can be done. Any hint's how can i sort it out ?
ProductName: SM-R765A
Current Binary: Samsung official
System Status: Custom
Reactivation lock: ON
Please HELP!!
Look into this Thread:
https://forum.xda-developers.com/smartwatch/gear-s3/sm-r765f-teardown-t3659431
You need USB cable...
Combination Firmware + Stock Firmware is available for SM-R765A ATT US device..
You can also watch this Video from Galaxy Watch SM-R8...
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
To see how to connect USB cable...
Best Regards
Edit 1.
Tizen 3 Stock Firmware... CQL1 for SM-R765A ATT
https://www.file-upload.net/download-13127722/SM-R765A.zip.html
Combination Firmware for SM-R765A ATT
https://www.file-upload.net/download-13378503/COMBINATION-FT30_R765AUCU2CRB1.tar.rar.html
Code:
COMBINATION-FT30_R765AUCU2CRB1.tar.md5
Best Regards
works just fine after usb cable soldering but i am unable to remove Activation Lock. I did everything step by step but activation is still ON. Is something special with this model ?
hello I need help with the gear s3 of at & t thanks to add free manage to turn it on but when loading the files empty.bin loads but when restarting in bootloader the activation code is still active does anyone have the solution to this? his is the code that I used for sbd
sbd connect 192.168.1.4
adb root on
sdb push empty.bin/opt/usr/media/
sdb shell dd if=/opt/usr/media/empty.bin of=/dev/mmcb1k0p15
sbd shell reebot download
neykov_t said:
Hi,
i got issue stuck in this odin mode.. I just flash Combi_FTMA_R760XXU2BQC2 firmware and NetOdin says: PASS, but S3 show error and say that need do it again.
Now it stay in odin mode downloading... and nothing can be done. Any hint's how can i sort it out ?
ProductName: SM-R765A
Current Binary: Samsung official
System Status: Custom
Reactivation lock: ON
Please HELP!!
Click to expand...
Click to collapse
What was ur solution?
i decided to install watch os onto my gear s3 frontier and when i did, it booted and it just says kernel panic upload mode,
ive tried to flash the old fermware onto it but the download wireless doesnt work at all ive tried to solder directly to the usb but that just doesnt work it connects to my computor but just gives me a error.
the screen says (i cant read some of the words becuause there off screen:
KERNAL PANIC
UPLOAD MODE
[ RST_STAT = 0x20000000 ]
ASV TBL VER = 5
ASV CPU 5 G3D:5 MIF:5 INT:5 CAM:5 CP:5
ssing init = oprion to kernel. See nd. try
r guidance Linux Documentation/int. t
can anybody please help me
logandavid said:
It seems like your Samsung Gear S3 Frontier is stuck in a "Kernel Panic Upload Mode" error. This is usually caused by a problem with the device's firmware or operating system. To resolve the issue, you may need to try different methods of flashing the firmware, such as using a computer or a different device, or reaching out to the manufacturer for further assistance.
Click to expand...
Click to collapse
ive done all that but i cant get it to work
Unbricking Samsung Gear S3 free firmware SM-R765A - Electrovo Engineering Services
This method describes the unbricking Samsung Galaxy Gear S3 SM-R765A watch. This method works for all Samsung Gear Watches, but the firmware will only work for the SM-R765A model of watch. When the Samsung Gear watch is bricked so they will not turn on or function as a normal watch.…
electrovo.com
working