Version of Samsung Galaxy Grand Prime:Galaxy grand prime s920l
I have a soft bricked grand prime, my reactivation lock was still enabled and it's in a constant boot loop.
I can access the recovery mode, attempted to factory reset, clear cache and restore, which did not work.
I can access download mode and connect to Odin with my laptop, yet I can not find my stock room or anything to restore my phone and take it out of the boot loop.
Please help me with this problem, I can't stand looking at my phone which after paying for everything, service and all cost me close to 300 dollars..
Download Samsung Kies and do a emergency firmware update or something like that. Then put your exact phone model, s/n, and sit back and let Kies do its thing
Sent from my SM-G530T using XDA-Developers mobile app
Negative. It does not support my phone model.
Related
I searched most of the web for a week now, trying to figure out how to fix my Tablet on this nightmare.
so before it all began, i left my Tablet charging in midnight, left it in stand-by mode for 12 hours (yes i slept for 12 hours). when i woke up, it was on shutdown mode. i don't know why, i tried opening it, but it was stuck on Samsung Logo for nearly 2 mins. then i tried re-restart it again, and then i was stuck on "Samsung Galaxy tab 2 7.0". I can charge my Tab and it only has 80% battery for some reason. and so i asked someone from Yahoo Ask about how to fix this problem, i couldn't go to Recovery mode or start my tab, but everytime i try, it'll only get stuck at "Samsung Galaxy tab 2 7.0". Now, this guy said i should download a custom os or firmware or smth. (Forgot). and then i downloaded Odin, and a Firmware. for my GT-P3100.
I know i made a mistake, since i wanted to already fix my problem, i went to try anything i didn't actually know of. Now i have a problem, I didn't listen to "Don't turn off target" thing, and i shutdown my tab in the middle of using Odin, since most of the tries failed, Now i got the Firmware upgrade encountered an Issue.
I Tried using Samsung Kies to fix the issue, but it'll only get stuck on Connecting... i tried reinstalling the Drivers but nothing happened, then i uninstalled Kies. and then i download firmwares that might help me with my problem. but most of them failed.
i have 2 Firmware Stock for GT-P3100 Philippines. I really want to get my tab fixed already without a technician repairing it for me. so can you guys help?
I'm about to Download and try Jellybean Firmware, I Don't know anything about this problem nor these firmware. since i couldn't connect to Kies, i only tried fixing it on Odin.
Most of the Firmwares i tried failed. and every time i want to find some thread with the same problem as mine, i couldn't find anything.
i tried everything and it still wont work.
HELP!
._. It happened to me when i deleted System using the recovery mode e.e You should call samsung or buy another tablet ~i have 1 p3100~
Sent from my SM-G800H using XDA Free mobile app
Eddy_0205 said:
._. It happened to me when i deleted System using the recovery mode e.e You should call samsung or buy another tablet ~i have 1 p3100~
Sent from my SM-G800H using XDA Free mobile app
Click to expand...
Click to collapse
if i ran out of options, i have no choice but to get it fixed by some pro. i don't really know how it happened to my tablet : (
............................
HELP
Can someone help me, because I have a tab same isseu
I have GT-P3100 SamsungTab 2 (7''). Due to some reason its unable to boot normal and stuck at bootup logo.I try open recovery mode but fail.
I open download mode and try update firmware by ODIN3. But fail as USB and set disconnected in middle. After that phone unable to boot in download or recovery mode and always shows "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again."
I tried again with ODIN but unable to flash firmware. Tried CWM & firmware MD5 files but all fail. On ODIN3 (3.07) it shows success in tool but actually no impact on set. When try with ODIN3 (1.85) it saying fail to write NAND.
Is any way i can correct my Tablet?
Any suggestion will be welcomed.
Thanks in advance
Umamkgf
Hello. I have bricked my J1 2016 galaxy device. I've tried to upgrade android to 6.0, but it failed because of the FRP (factory recovery protection). Now phone shows that i have to connect it via Smart Switch PC and try emergency recovery. But when i plug the phone, nothing happens. All i see is that my phone is not supported. So actually it is bricked device. How can i remove that lock, or bypass it? Samsung Galaxy J1 (2016), j120fn.
Update: I was able to enter emergency recovery mode, but, the phone auto-quits the download mode. How can i fix that?
I'm desperately in need of any help.
all i know just reset ur phone using odin
My phone stuck on recovery mode.
and also Odin doesnt detect my phone.
PLEASE HELP ME.
I dont have money to go at the centre to repair my phone.
To make Odin recognize your phone, install the appropriate drivers.
Hi everyone,
I have about 20 of these Note 2 phones all with MDM locks. I tried to flash through Odin and it passes okay the stock firmware flashing processes but still comes to the password MDM lock screen.
I then attempted to flash it again with the stock firmware but enabled the NAND erase option. This seems to be wiping the phone okay (I saw the Android logo and the phone flashing).
Now the phone is stuck on the Samsung logo. What should I do now, any suggestions?
Many thanks.
I have a Samsung galaxy s6 edge plus, I've tried everything to fix the problem i have. Its stuck telling me i have to use smart switch to fix my phone. Ive tried using download mode and odin and restore stock firmware of both new and the same version of android that was on the phone before the issue (5.1.1). The internal storage got wiped, since this happened i was unable to boot the phone past this point. Any time i use odin it fails at the pit file when i try to use all 4 files to repair. Smart switch doesnt even see my device in the emergency recover, I'm at a lost of what i should do, there is nothing on the internet with the same problem i have. Ive tried reinstalling drivers that also doesnt work. Odin sees the device but cant do anything with it. Any suggestions would be greatly appreciated as i cant even shut the phone off without letting it die...
Still need help with this, I'm sure somewhere one of you have had this problem and know what to do.
Still stuck on emergency recovery and cant flash anything because the device wont allow it
bump
Bump
Hi all,
I'm not new in XDA but i'm new in Samsung and yesterday i bricked my device. i own a Samsung Galaxy S8+ G955F
What i did was, first ticked OEM Unlock and USB Debugging in Developer options and then flashed the original TWRP recovery for Galaxy S8+.
After reboot the phone bootloop, i only can go to Download Mode and after that i trigger the Knox too.
If i try to flash an original Samsung rom i solve the problem?
Any help please?
Thx.
Solved by flashing a stock rom.
Sent from my Samsung Galaxy S8+ using XDA Labs
Reflash stock recovery.
Jtag dead phone to life and rewrite IMEI
First of all my phone is the s8+ G955fd, but I am sure that the people that helped me can help most Samsung owners with bricked phones.
My phone ended up being stuck on the first boot screen, I couldn't get into recovery or download mode. I installed TWRP and after that I lost my IMEI numbers( dual sim), so I tried to reflash stock and thats when i became bricked. I searched someone to help and found reference to the Fonefunshop in England. I sent it there and they said that the eMMC chip was bad. I searched for someone who could write to it or put a new one on the motherboard . I found A2Z cellular in Ottawa Canada. They used jtag to restore it to stock and they told me that the Fonefunshop had not opened the phone which is necessary to use jtag as they claimed, so avoid them.
The phone was now back doing everything it should except the IMEI's were null like before. I gave them the original IMEI's and the phone is working like new.
If your Samsung is bricked these guys can probably fix it and it won't cost much to find out.
PLEASE HELP!!!!!!!!!!!
I tried flashing TWRP Recovery 3.3.1-0 on Galaxy Tab A 10.1 LTE (2016) via Odin and when i tried to load into TWRP in just goes to the custom download mode without showing twrp, on top of all of this my tablet is now soft bricked and i can only access the download mode.
please help me...WHAT CAN I DO?????????????
JimJimJim22 said:
PLEASE HELP!!!!!!!!!!!
I tried flashing TWRP Recovery 3.3.1-0 on Galaxy Tab A 10.1 LTE (2016) via Odin and when i tried to load into TWRP in just goes to the custom download mode without showing twrp, on top of all of this my tablet is now soft bricked and i can only access the download mode.
please help me...WHAT CAN I DO?????????????
Click to expand...
Click to collapse
You need to find that devices forum and post there. This is for s8 plus only