Database Info

can't flash stock firmware neither twrp

Hi,
i recently bought this galaxy s6 i think it's from wind mobile italy
when i try to turn on it gives me "this device is locked because of an abnormal factory reset"
i looked in a couple of threads and i found that i should downgrade to 5.1.1 in order to access to phone
what i did ?
1-download 5.1.1 firmware and odin
2-try to flash via odin (PA)
it gives me this : "sw rev check fail device 3 binary 2" (failture)
3-then i tryed to install twrp via odin
and it gives me this :"custom binary blocked by r/l"
btw this is what i found writen in download mode :
____________________________________
-odin mode
-product name : SM-G920F
-current binary : samsung official
-system statusfficial
-reactivation lock : o,
-secure download: enabled
-knox warany void 0 (x0000)
-rp swrev b:3 k:2 s:2
___________________________________
please help me im stuck here

poursystem said:
Hi,
i recently bought this galaxy s6 i think it's from wind mobile italy
when i try to turn on it gives me "this device is locked because of an abnormal factory reset"
i looked in a couple of threads and i found that i should downgrade to 5.1.1 in order to access to phone
what i did ?
1-download 5.1.1 firmware and odin
2-try to flash via odin (PA)
it gives me this : "sw rev check fail device 3 binary 2" (failture)
3-then i tryed to install twrp via odin
and it gives me this :"custom binary blocked by r/l"
btw this is what i found writen in download mode :
____________________________________
-odin mode
-product name : SM-G920F
-current binary : samsung official
-system statusfficial
-reactivation lock : o,
-secure download: enabled
-knox warany void 0 (x0000)
-rp swrev b:3 k:2 s:2
___________________________________
please help me im stuck here
Click to expand...
Click to collapse
Most probably because of reactivation lock is 'On'. When enabled, no factory reset allowed. Flash back to original firmware and try to enter the system. It's going to be a bit messy because I'm sure you don't remember the original firmware. Hope it doesn't has any screen lock.
Sent from my SM-G925F

thanks mate for the comment , i just dont know what you mean by screen lock , cuz i can't even power upthe phone :/

poursystem said:
thanks mate for the comment , i just dont know what you mean by screen lock , cuz i can't even power upthe phone :/
Click to expand...
Click to collapse
Try to flash the firmware using smart switch[emergency firmware reinitialization) or odin.
Isn't it better to return it to the person who sold it?.
Sent from my SM-G925F

If u have mm as stock frimware thn u cant downgrade it if u want any help pm me with ur problem in detail and hit thanks button

bottom line , what's the way to turn on my phone withoutgetting the "this device is locked because of an abnormal factory reset" message

poursystem said:
bottom line , what's the way to turn on my phone withoutgetting the "this device is locked because of an abnormal factory reset" message
Click to expand...
Click to collapse
The only way is flash mm firmware again. As you said it's from wind, flash the latest for wind. Smart switch probably will decide the best, so try with it.
Sent from my SM-G925F

[Completed] Issues with 2 android devices

Samsung galaxy s3 i747m Telus :
Closed during a hard reset, it power on Android but close after a while, I could access to hard reset to get ...
Odin mode
product name sgh-i747m
current binary samsung official
system status custom
qualcomm secureboot enable
waranty bit 0
bootloader ap swrev 2
I would want to make it work back, root and unlock it ...
Jxd s5300 :
Forgot password and wifi didn't worked after a while, any idea ?

spikemcc said:
Samsung galaxy s3 i747m Telus :
Closed during a hard reset, it power on Android but close after a while, I could access to hard reset to get ...
Odin mode
product name sgh-i747m
current binary samsung official
system status custom
qualcomm secureboot enable
waranty bit 0
bootloader ap swrev 2
I would want to make it work back, root and unlock it ...
Jxd s5300 :
Forgot password and wifi didn't worked after a while, any idea ?
Click to expand...
Click to collapse
Greetings and welcome to assist. You can use kies/smartswitch emergency firmware recovery to fix your phone and then flash this in odin to root your phone
https://forum.xda-developers.com/showthread.php?t=1963790
Good Luck
Sawdoctor

gear s3 stuck in download mode

I flashed my gear s3 SM-R765V using netOdin. netodin succeded but the watch said it failed. now the watch only boots to download mode. but it doesn't say that the warranty is void just the system is custom. it wont allow any other recovery options but power off. I don't know how to fix this please help!

Same issue here any body ??????

Bootloop while reseting (Korean R760)

I got Bootloop while Formating to connect with new phone.
I just put my gear to Charging Dock while Formating,
And the circle In the gear has stopped.
So i did Hard Reboot to reboot my gear
And finally i got bootloop in booting screen
I cannot use Recovery Reset, it dosent work
Recovery restset started -> black screen -> Same bootloop
I can see
PRODUCT NAME: SM-R760
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
SECURE DOWNLOAD: ENABLED
WARRANTY VOID: 0 (0x0000)
RP SWREV: B:2 K:0 S:0
Final firmware : lastest Tizen 3
I've searched solutions to solve this bootloop problem,
But i cannot find best solution.

You can enter this Download wireless menu?
https://forum.xda-developers.com/gear-s3/help/wireless-mode-enter-gear-s3-sm-r760-t3710855
If yes, you can try to flash Firmware with netOdin.
Best Regards

adfree said:
You can enter this Download wireless menu?
https://forum.xda-developers.com/gear-s3/help/wireless-mode-enter-gear-s3-sm-r760-t3710855
If yes, you can try to flash Firmware with netOdin.
Best Regards
Click to expand...
Click to collapse
Yes i can enter download wireless menu.
I will try this method if service center requires money to fix
Thanks for helping and have a nice day

@adfree
Service Center Engineer has fixed my gear without paying

Thanx for feedback. :good:
Best Regards

bricked my watch

i decided to install watch os onto my gear s3 frontier and when i did, it booted and it just says kernel panic upload mode,
ive tried to flash the old fermware onto it but the download wireless doesnt work at all ive tried to solder directly to the usb but that just doesnt work it connects to my computor but just gives me a error.
the screen says (i cant read some of the words becuause there off screen:
KERNAL PANIC
UPLOAD MODE
[ RST_STAT = 0x20000000 ]
ASV TBL VER = 5
ASV CPU 5 G3D:5 MIF:5 INT:5 CAM:5 CP:5
ssing init = oprion to kernel. See nd. try
r guidance Linux Documentation/int. t
can anybody please help me

logandavid said:
It seems like your Samsung Gear S3 Frontier is stuck in a "Kernel Panic Upload Mode" error. This is usually caused by a problem with the device's firmware or operating system. To resolve the issue, you may need to try different methods of flashing the firmware, such as using a computer or a different device, or reaching out to the manufacturer for further assistance.
Click to expand...
Click to collapse
ive done all that but i cant get it to work

Unbricking Samsung Gear S3 free firmware SM-R765A - Electrovo Engineering Services
This method describes the unbricking Samsung Galaxy Gear S3 SM-R765A watch. This method works for all Samsung Gear Watches, but the firmware will only work for the SM-R765A model of watch. When the Samsung Gear watch is bricked so they will not turn on or function as a normal watch.…
electrovo.com
working