Hey Guyz,
I found a new way to revert back to MIUI V5 from MIUI V6.
As me many of us hav very slow internet connection due to which we are not able to download via TWRP recovery Manager. To avoid downloading i found new way
## First, you have to root your phone.
Steps:
Download the file Root_HM1S_MIUI6_Global.zip and put it in root of sdcard (Use internal)
Launch the Updater app
From the menu select 'Choose update package', and navigate to root of sdcard and select Root_HM1S_MIUI6_Global.zip
The updater app now reboots into the recovery, installs the update and then reboot
After the reboot has finished, You will able to see a new app namely SuperSU.
Open it one popup will aris and choose 'Continue' to update the SU binary
7. In the next dialog select 'Normal' and an updated su binary will get installed
8. Finally confirm to 'Reboot' after the successful installation
## Now Download Flashify App
## After that download TWRP or Philz Recovery and extract it
##There u will find the recovery.img file navigate it to root of sdcard
##Now Open Flashify App
##Select Recovery image
##There Select choose a file
##And navigate to the Image and select it..
##Wait for few seconds popup will appear Flash complete and there select reboot now
##Now you will reboot to recovery
For TWRP Recovery:
#Now open recovery and go to wipe. And go to advance menu and wipe you all data internal storage an everything except external storage.
#After successfully wipe your phone. Go to reboot menu and reboot to recovery. It will back you again to TWRP recovery.
#Now select install. And it will show your phone storage but you can go up lavel A and choose external_SD and select your download v5 ROM.
#After select the ROM flash it....
#And it will successfully flash(it may take some time) and now touch reboot option below.
#Successfully Reverted back to MIUI V5
For Philz Touch Recovery
#Navigate to Wipe and Format Option
#Select Wipe Cache , Dalvik Cache, And then Select Factory Reset
#After that Select "Clean to Install a New ROM"
#Now Select ++++Go Back++++
#Select Install Zip
#Choose zip from external sdcard and Select the ROM
#Wait for few minutes and then reboot
#Successfully reverted back to MIUI V5..
Find my post on MIUI:-
http://en.miui.com/thread-147144-1-1.html
:angel:
Hit Thanks If I helped you
no matter which custom rom I flash, always gets stuck in bootloop
I'm not new to flashing roms and stuffs. I'm on CM11 on RedMi 1S. Now whenever I tried a different rom(say CM12.1) even after following each instructions correctly, the phone always gets stuck in bootloop( the CM avatar). Please help me out from this problem. I'm using TWRP.
Gapps for lenovo a7000
i am faceing gapps problems in some rom of lenovo a7000 i also try other gapps but which gives binary errors so i decided to create gapps for our device lenovo a7000 .
This gapps only have
1. playstore
2. google
other apps like gmail , google play game , google play service etc. you will download from playstore after installation of this gapps
DOWNLOAD GAPPS FROM LINK GIVEN BELOW
https://docs.google.com/uc?id=0Bzg04NVHFxrpNl9mTXR5a3piSFU&export=download
HOW TO INSTALL GAPPS IN LENOVO A7000
(this gapps only install through twrp, cwm recovery if you don't install custom recovery then 1st install custom recovery)
1. turn off your device
2. press and hold volume up + volume down + power key
3. wait 5 to 10 sec you will see recovery mod in your device
4. click on install
5. find gapps (where you save after download)
6. click on gapps zip file
7. then swipe to install
8. after installation boot your device to system.
after turn on your device you will see playstore in your device
yadav. said:
Gapps for lenovo a7000
i am faceing gapps problems in some rom of lenovo a7000 i also try other gapps but which gives binary errors so i decided to create gapps for our device lenovo a7000 .
This gapps only have
1. playstore
2. google
other apps like gmail , google play game , google play service etc. you will download from playstore after installation of this gapps
DOWNLOAD GAPPS FROM LINK GIVEN BELOW
https://docs.google.com/uc?id=0Bzg04NVHFxrpNl9mTXR5a3piSFU&export=download
HOW TO INSTALL GAPPS IN LENOVO A7000
(this gapps only install through twrp, cwm recovery if you don't install custom recovery then 1st install custom recovery)
1. turn off your device
2. press and hold volume up + volume down + power key
3. wait 5 to 10 sec you will see recovery mod in your device
4. click on install
5. find gapps (where you save after download)
6. click on gapps zip file
7. then swipe to install
8. after installation boot your device to system.
after turn on your device you will see playstore in your device
Click to expand...
Click to collapse
Greetings,
Your device has a dedicated forum on XDA. This post does not belong in XDA Assist.
Thread closed.
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
By flashing a custom rom, your warranty is void.
I am not responsible for bricked devices. You are choosing to make these modifications.
I will not give support for any modifications, frameworks and apps you install.
I will not give support, if you did not follow flash instructions 'word by word'.
Click to expand...
Click to collapse
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
reserved
For Patches
First! Congratulation for the ROM!
It is stable or in beta version? Bugs?
i am not compiler..... i just port it
pickmod said:
First! Congratulation for the ROM!
It is stable or in beta version? Bugs?
Click to expand...
Click to collapse
bugs:
*front camera flash not responding
*weak network
*some gesture not responding
Zidni said:
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
By flashing a custom rom, your warranty is void.
I am not responsible for bricked devices. You are choosing to make these modifications.
I will not give support for any modifications, frameworks and apps you install.
I will not give support, if you did not follow flash instructions 'word by word'.
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
Click to expand...
Click to collapse
Vai. Akta new ROM port Korean.
---------- Post added at 01:57 AM ---------- Previous post was at 01:53 AM ----------
Zidni said:
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
By flashing a custom rom, your warranty is void.
I am not responsible for bricked devices. You are choosing to make these modifications.
I will not give support for any modifications, frameworks and apps you install.
I will not give support, if you did not follow flash instructions 'word by word'.
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
Click to expand...
Click to collapse
Vai. Akta new ROM port koriyen.
symphony h400
plz make a custom rom for symphony h400..
need help..................
Zidni said:
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
Click to expand...
Click to collapse
------------------------------------
Can u give me the location of gesture file of this rom????
plz help me buddy.
Zidni said:
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
Click to expand...
Click to collapse
i ve followed the mt6580 porting guide and ported this cm13 on my intex cloud q11. everything went fine, but my q11 gets stuck up at "starting apps, plz help me. plz.
dj4v1n45h said:
i ve followed the mt6580 porting guide and ported this cm13 on my intex cloud q11. everything went fine, but my q11 gets stuck up at "starting apps, plz help me. plz.
Click to expand...
Click to collapse
which guide?
Zidni said:
which guide?
Click to expand...
Click to collapse
hey buddy. no thanks.
i ve made it.
everythings working fine now.
all i did was just ported d boot.img by replacing the kernelz and zip it and then flash the entire rom.
thanks btw.
Zidni said:
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
Click to expand...
Click to collapse
Is it gonna work for walton f7? Mt6580m marshmallow
Nazmuloff said:
Is it gonna work for walton f7? Mt6580m marshmallow
Click to expand...
Click to collapse
yes....you need to port it first
Hey dude! I would like to test this rom but first i need to know how the good the ram usage is! (If you could post a screenshot with the running procceses it would be helpfull )
ntouris3 said:
Hey dude! I would like to test this rom but first i need to know how the good the ram usage is! (If you could post a screenshot with the running procceses it would be helpfull )
Click to expand...
Click to collapse
400/450mb ram on 1gb ram based phone...
and sorry i am currently not running on this rom
Zidni said:
400/450mb ram on 1gb ram based phone...
and sorry i am currently not running on this rom
Click to expand...
Click to collapse
Ohh ok . I asked because i ported a cm13 and i thought that the ram usage was very high with no reasson, but as you say it was 400mb then this is normal. Thanks btw!
Can you make a cyanogenmod 13 or 14 if possible for i50 please i am rooted and have twrp but i need a custom rom thanks
Can u give me cynogenmod for symphony r20
Mokee android 7.1 .1 for lenovo A6010 plus [camera and flash work]
Download rom for a6010 plus:
open gapps pico:
INSTALL USING TWRP
1. Download and transfer the ROM and Gapps files to internal storage.
2. Boot your device into TWRP recovery. You can simply Google how to enter recovery mode on your device.
3. In TWRP recovery, click on Wipe » Advanced Wipe. Here select the following options shown in the screenshot below. Do not select the option which reads ‘Internal Storage‘ at any cost, as it will wipe off EVERYTHING, including your ROM file.
4. Go back to TWRP main menu, tap on Install and select the rom Zip file that you transferred to your device in Step 1.
5. After selecting the .zip file, do Swipe to Confirm Flash on the bottom of the screen to begin the custom ROM installation process. This may take some time.
6. Once your ROM is successfully flashed, you’ll see Wipe cache/Dalvik option, select it and then do Swipe to wipe on the bottom of the screen.
7. Now flash the rom Gapps file similarly like you flashed the ROM file.
8. After flashing both ROM and Gapps files, reboot your device.
ahmed2014011 said:
Mokee android 7.1 .1 for lenovo A6010 plus [camera and flash work]
Download rom for a6010 plus:
open gapps pico:
INSTALL USING TWRP
1. Download and transfer the ROM and Gapps files to internal storage.
2. Boot your device into TWRP recovery. You can simply Google how to enter recovery mode on your device.
3. In TWRP recovery, click on Wipe » Advanced Wipe. Here select the following options shown in the screenshot below. Do not select the option which reads ‘Internal Storage‘ at any cost, as it will wipe off EVERYTHING, including your ROM file.
4. Go back to TWRP main menu, tap on Install and select the rom Zip file that you transferred to your device in Step 1.
5. After selecting the .zip file, do Swipe to Confirm Flash on the bottom of the screen to begin the custom ROM installation process. This may take some time.
6. Once your ROM is successfully flashed, you’ll see Wipe cache/Dalvik option, select it and then do Swipe to wipe on the bottom of the screen.
7. Now flash the rom Gapps file similarly like you flashed the ROM file.
8. After flashing both ROM and Gapps files, reboot your device.
Click to expand...
Click to collapse
Could you please supply direct links, ppc links are not allowed on xda
Regards
Sawdoctor