This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
By flashing a custom rom, your warranty is void.
I am not responsible for bricked devices. You are choosing to make these modifications.
I will not give support for any modifications, frameworks and apps you install.
I will not give support, if you did not follow flash instructions 'word by word'.
Click to expand...
Click to collapse
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
reserved
For Patches
First! Congratulation for the ROM!
It is stable or in beta version? Bugs?
i am not compiler..... i just port it
pickmod said:
First! Congratulation for the ROM!
It is stable or in beta version? Bugs?
Click to expand...
Click to collapse
bugs:
*front camera flash not responding
*weak network
*some gesture not responding
Zidni said:
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
By flashing a custom rom, your warranty is void.
I am not responsible for bricked devices. You are choosing to make these modifications.
I will not give support for any modifications, frameworks and apps you install.
I will not give support, if you did not follow flash instructions 'word by word'.
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
Click to expand...
Click to collapse
Vai. Akta new ROM port Korean.
---------- Post added at 01:57 AM ---------- Previous post was at 01:53 AM ----------
Zidni said:
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
By flashing a custom rom, your warranty is void.
I am not responsible for bricked devices. You are choosing to make these modifications.
I will not give support for any modifications, frameworks and apps you install.
I will not give support, if you did not follow flash instructions 'word by word'.
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
Click to expand...
Click to collapse
Vai. Akta new ROM port koriyen.
symphony h400
plz make a custom rom for symphony h400..
need help..................
Zidni said:
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
Click to expand...
Click to collapse
------------------------------------
Can u give me the location of gesture file of this rom????
plz help me buddy.
Zidni said:
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
Click to expand...
Click to collapse
i ve followed the mt6580 porting guide and ported this cm13 on my intex cloud q11. everything went fine, but my q11 gets stuck up at "starting apps, plz help me. plz.
dj4v1n45h said:
i ve followed the mt6580 porting guide and ported this cm13 on my intex cloud q11. everything went fine, but my q11 gets stuck up at "starting apps, plz help me. plz.
Click to expand...
Click to collapse
which guide?
Zidni said:
which guide?
Click to expand...
Click to collapse
hey buddy. no thanks.
i ve made it.
everythings working fine now.
all i did was just ported d boot.img by replacing the kernelz and zip it and then flash the entire rom.
thanks btw.
Zidni said:
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
Click to expand...
Click to collapse
Is it gonna work for walton f7? Mt6580m marshmallow
Nazmuloff said:
Is it gonna work for walton f7? Mt6580m marshmallow
Click to expand...
Click to collapse
yes....you need to port it first
Hey dude! I would like to test this rom but first i need to know how the good the ram usage is! (If you could post a screenshot with the running procceses it would be helpfull )
ntouris3 said:
Hey dude! I would like to test this rom but first i need to know how the good the ram usage is! (If you could post a screenshot with the running procceses it would be helpfull )
Click to expand...
Click to collapse
400/450mb ram on 1gb ram based phone...
and sorry i am currently not running on this rom
Zidni said:
400/450mb ram on 1gb ram based phone...
and sorry i am currently not running on this rom
Click to expand...
Click to collapse
Ohh ok . I asked because i ported a cm13 and i thought that the ram usage was very high with no reasson, but as you say it was 400mb then this is normal. Thanks btw!
Can you make a cyanogenmod 13 or 14 if possible for i50 please i am rooted and have twrp but i need a custom rom thanks
Can u give me cynogenmod for symphony r20
Related
Dear XOLO Q3000 Users,
I am porting today the AROMA based MIUI ROM for our device.
It is based on the rom of ZOPO-zp980 4.4.4 version. I just mode and copied some files from other ROMS and made it work for this devise.
It is just a copy and paste one and nothing is created by me.
I have added some more application.
Almost most of them are functioning.
Please down load the ROM from Google Drive in the url below:
url: https://drive.google.com/file/d/0Bz8Fgu4wkBnqOThCY25HcFpmWDA/edit?usp=sharing
Follow the following steps:
1. Download the ROM and put into a folder in your sd card and take it to your sdcard without extracting it
2. Go to CWM or touch recovery. I have incorporated the Carlive touch recovery 2.2 based on CWM 6.0.4.4 in the ROM itself and you will open the recovery in the same.
3. Carry out the wipe all after clicking wipe function before installing.
4. Select install zip and select the just download rom and flash it.
5. Please wait for some time and it will boot up in about a minute or 1.5 minute.
6. Enjoy.
Boots takes about 1.5 to 2 minutes. Carliv Touch recovery 2.2 based on CWM 6.0.4.4 is built in the ROM.
For any doubts and other problems write here.
puduraja said:
Dear XOLO Q3000 Users,
I am porting today the AROMA based MIUI ROM for our device.
It is based on the rom of ZOPO-zp980 4.4.4 version. I just mode and copied some files from other ROMS and made it work for this devise.
It is just a copy and paste one and nothing is created by me.
I have added some more application.
Almost most of them are functioning.
Please down load the ROM from Google Drive in the url below:
url: https://drive.google.com/file/d/0Bz8Fgu4wkBnqOThCY25HcFpmWDA/edit?usp=sharing
Follow the following steps:
1. Download the ROM and put into a folder in your sd card and take it to your sdcard without extracting it
2. Go to CWM or touch recovery. I have incorporated the Carlive touch recovery 2.2 based on CWM 6.0.4.4 in the ROM itself and you will open the recovery in the same.
3. Carry out the wipe all after clicking wipe function before installing.
4. Select install zip and select the just download rom and flash it.
5. Please wait for some time and it will boot up in about a minute or 1.5 minute.
6. Enjoy.
Boots takes about 1.5 to 2 minutes. Carliv Touch recovery 2.2 based on CWM 6.0.4.4 is built in the ROM.
For any doubts and other problems write here.
Click to expand...
Click to collapse
thanks a lot
will give a try n let u know abt performance n any other things
Downloaded...Flashed...Bricked...Recovered.
View attachment 2928871
Hello Everyone
M back..with some new stuffs
itz FAISAL new on xda...
Today i am going to share an rom of JELLY BEAN 4.1.2 based on xperia Rom
For our SPICE MI-435.. hehehe..
u got amazed na ..YUp M serious ..
Download Link: http://www.mediafire.com/download/2bw0kr2c9sznddd/XOLO_A500_Mod.zip
Gapps Download Link: http://www.directmirror.com/files/1G1NLBWW
Flash the Gapps using Root Explorer
Fb: http://fb.com/MDFAISAL6
|||| GUIDE FOR INSTALLATION ||||
1. Battery must have 60% above
2. Move downloaded XOLO A500 Mod.zip to your sd card root
3. Boot to CWM recovery mode [[VOL DOWN+POWER KEY TOGETHER]]
4. MAKE A NANDROID BACKUP OF UR WHOLE SYSTEM
5. Go to MOUNT AND STORAGE and Do a SYSTEM FORMAT,,mount DATA,,mount SYSTEM,, mount SD CARD
6. Go to install zip from sd card
7. Choose zip from sd card
8. Install XOLO A500 Mod ROM.zip
9. After successfully installation REBOOT
10. Done
ENJOYYY
PLZZZ HIT THE THANKS BUTTON IF I REALLY HELPED YOU :good:
Installing Video OUT NOW on YouTube
Watch : https://www.youtube.com/watch?v=DYLmaO4asGs
||| MD FAISAL NP |||
AOSP Android Kitkat 4.4.2 on GiONEE P4
- Install AOSP Kitkat 4.4.2 rom
for experiance Android Kitkat 4.4.2
Step to install ROM :
- Place ROM file( sdasd.zip ) and all file link below to your internal/external storage of your device
- root your device with kingroot application
- install recovery tool to flash custom recovery
- flash Philz Recovery Credit Md Belayet
- then boot device in recovery mod :
How( Power off device / then Press volume up+power button continuously )
- after select Wipe and Format Options / then select Clean to Install a New ROM
wait for complete process
- after go back and through first option select Install zip and select sdasd.zip file
wait for complete process after complete process rebote your device and USE AOSP Android Kitkat 4.4.2
Link for download ROM : https://docs.google.com/uc?id=0B6rjrOlNHktrYUtudXlPaDhpZW8&export=download
Link for download Philz Recovery : http://d-h.st/fms
awesome rom
Mokee android 7.1 .1 for lenovo A6010 plus [camera and flash work]
Download rom for a6010 plus:
open gapps pico:
INSTALL USING TWRP
1. Download and transfer the ROM and Gapps files to internal storage.
2. Boot your device into TWRP recovery. You can simply Google how to enter recovery mode on your device.
3. In TWRP recovery, click on Wipe » Advanced Wipe. Here select the following options shown in the screenshot below. Do not select the option which reads ‘Internal Storage‘ at any cost, as it will wipe off EVERYTHING, including your ROM file.
4. Go back to TWRP main menu, tap on Install and select the rom Zip file that you transferred to your device in Step 1.
5. After selecting the .zip file, do Swipe to Confirm Flash on the bottom of the screen to begin the custom ROM installation process. This may take some time.
6. Once your ROM is successfully flashed, you’ll see Wipe cache/Dalvik option, select it and then do Swipe to wipe on the bottom of the screen.
7. Now flash the rom Gapps file similarly like you flashed the ROM file.
8. After flashing both ROM and Gapps files, reboot your device.
ahmed2014011 said:
Mokee android 7.1 .1 for lenovo A6010 plus [camera and flash work]
Download rom for a6010 plus:
open gapps pico:
INSTALL USING TWRP
1. Download and transfer the ROM and Gapps files to internal storage.
2. Boot your device into TWRP recovery. You can simply Google how to enter recovery mode on your device.
3. In TWRP recovery, click on Wipe » Advanced Wipe. Here select the following options shown in the screenshot below. Do not select the option which reads ‘Internal Storage‘ at any cost, as it will wipe off EVERYTHING, including your ROM file.
4. Go back to TWRP main menu, tap on Install and select the rom Zip file that you transferred to your device in Step 1.
5. After selecting the .zip file, do Swipe to Confirm Flash on the bottom of the screen to begin the custom ROM installation process. This may take some time.
6. Once your ROM is successfully flashed, you’ll see Wipe cache/Dalvik option, select it and then do Swipe to wipe on the bottom of the screen.
7. Now flash the rom Gapps file similarly like you flashed the ROM file.
8. After flashing both ROM and Gapps files, reboot your device.
Click to expand...
Click to collapse
Could you please supply direct links, ppc links are not allowed on xda
Regards
Sawdoctor
Complete tutorial for installing MIUI 9 on Lenovo S850 Row version
Lenovo S850 MIUI 9 ROM : https://drive.google.com/file/d/0B3kCZJTdXnjoOURkZ3pRV1lPZlE
Lenovo S850 TWRP_3.0.2.0 : https://yadi.sk/d/IG8xTbGJshxti
Smooth and Stable with no bugs. No GAPPS needed
https://www.youtube.com/watch?v=v8Lz8mFhu7U
For installing custom recovery: https://www.xda-developers.com/how-to-install-clockworkmod
I personally suggest to install via ADB.
Steps for How to Install MIUI 9 on Lenovo S850
1. First of all, Download the ROM to your smartphone.
If you have downloaded the zip file in your computer, then connect your device to computer using USB cable.
Now move the downloaded ROM to your smartphone.
2. Now turn your phone off.
3. Reboot to recovery by pressing the Volume Down + Volume Up + Power button simultaneously.
4. Before installing the custom ROM, it’s better if you Wipe all the data by Clicking the Wipe button and Select Advanced Wipe – Tick only Dalvik/ART cache, Data and Cache. Don't tick system, you must have stock rom system to install this.
5. Swipe to WIPE
6. Now Click the Install Button to install the MIUI 9 zip file.
7. Now Browse through the files of Internal memory where you have the Zip file of Custom Rom (better move the custom ROM zip into root of your internal memory)
8. Select the Custom Rom Zip File and Swipe to confirm the installation. Then reboot.
That’s it ! Now reboot your phone. You have Install MIUI 9 on Lenovo S850. Enjoy !!!
If you have any other problem with this device, ask in this thread.
Dum Question
Sorry i'm new.
A dum question .
Is it better than original ROM ??