Dear XOLO Q3000 Users,
I am porting today the AROMA based MIUI ROM for our device.
It is based on the rom of ZOPO-zp980 4.4.4 version. I just mode and copied some files from other ROMS and made it work for this devise.
It is just a copy and paste one and nothing is created by me.
I have added some more application.
Almost most of them are functioning.
Please down load the ROM from Google Drive in the url below:
url: https://drive.google.com/file/d/0Bz8Fgu4wkBnqOThCY25HcFpmWDA/edit?usp=sharing
Follow the following steps:
1. Download the ROM and put into a folder in your sd card and take it to your sdcard without extracting it
2. Go to CWM or touch recovery. I have incorporated the Carlive touch recovery 2.2 based on CWM 6.0.4.4 in the ROM itself and you will open the recovery in the same.
3. Carry out the wipe all after clicking wipe function before installing.
4. Select install zip and select the just download rom and flash it.
5. Please wait for some time and it will boot up in about a minute or 1.5 minute.
6. Enjoy.
Boots takes about 1.5 to 2 minutes. Carliv Touch recovery 2.2 based on CWM 6.0.4.4 is built in the ROM.
For any doubts and other problems write here.
puduraja said:
Dear XOLO Q3000 Users,
I am porting today the AROMA based MIUI ROM for our device.
It is based on the rom of ZOPO-zp980 4.4.4 version. I just mode and copied some files from other ROMS and made it work for this devise.
It is just a copy and paste one and nothing is created by me.
I have added some more application.
Almost most of them are functioning.
Please down load the ROM from Google Drive in the url below:
url: https://drive.google.com/file/d/0Bz8Fgu4wkBnqOThCY25HcFpmWDA/edit?usp=sharing
Follow the following steps:
1. Download the ROM and put into a folder in your sd card and take it to your sdcard without extracting it
2. Go to CWM or touch recovery. I have incorporated the Carlive touch recovery 2.2 based on CWM 6.0.4.4 in the ROM itself and you will open the recovery in the same.
3. Carry out the wipe all after clicking wipe function before installing.
4. Select install zip and select the just download rom and flash it.
5. Please wait for some time and it will boot up in about a minute or 1.5 minute.
6. Enjoy.
Boots takes about 1.5 to 2 minutes. Carliv Touch recovery 2.2 based on CWM 6.0.4.4 is built in the ROM.
For any doubts and other problems write here.
Click to expand...
Click to collapse
thanks a lot
will give a try n let u know abt performance n any other things
Downloaded...Flashed...Bricked...Recovered.
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
By flashing a custom rom, your warranty is void.
I am not responsible for bricked devices. You are choosing to make these modifications.
I will not give support for any modifications, frameworks and apps you install.
I will not give support, if you did not follow flash instructions 'word by word'.
Click to expand...
Click to collapse
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
reserved
For Patches
First! Congratulation for the ROM!
It is stable or in beta version? Bugs?
i am not compiler..... i just port it
pickmod said:
First! Congratulation for the ROM!
It is stable or in beta version? Bugs?
Click to expand...
Click to collapse
bugs:
*front camera flash not responding
*weak network
*some gesture not responding
Zidni said:
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
By flashing a custom rom, your warranty is void.
I am not responsible for bricked devices. You are choosing to make these modifications.
I will not give support for any modifications, frameworks and apps you install.
I will not give support, if you did not follow flash instructions 'word by word'.
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
Click to expand...
Click to collapse
Vai. Akta new ROM port Korean.
---------- Post added at 01:57 AM ---------- Previous post was at 01:53 AM ----------
Zidni said:
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
By flashing a custom rom, your warranty is void.
I am not responsible for bricked devices. You are choosing to make these modifications.
I will not give support for any modifications, frameworks and apps you install.
I will not give support, if you did not follow flash instructions 'word by word'.
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
Click to expand...
Click to collapse
Vai. Akta new ROM port koriyen.
symphony h400
plz make a custom rom for symphony h400..
need help..................
Zidni said:
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
Click to expand...
Click to collapse
------------------------------------
Can u give me the location of gesture file of this rom????
plz help me buddy.
Zidni said:
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
Click to expand...
Click to collapse
i ve followed the mt6580 porting guide and ported this cm13 on my intex cloud q11. everything went fine, but my q11 gets stuck up at "starting apps, plz help me. plz.
dj4v1n45h said:
i ve followed the mt6580 porting guide and ported this cm13 on my intex cloud q11. everything went fine, but my q11 gets stuck up at "starting apps, plz help me. plz.
Click to expand...
Click to collapse
which guide?
Zidni said:
which guide?
Click to expand...
Click to collapse
hey buddy. no thanks.
i ve made it.
everythings working fine now.
all i did was just ported d boot.img by replacing the kernelz and zip it and then flash the entire rom.
thanks btw.
Zidni said:
This is Unofficial CM13 Build For Symphony i10**
Disclaimer:
Known Bug: Front Camera Flash Not Supporting, Weak Network Signal
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. CM13 For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Android 6.0 Marshmallow CM13 For i10 zip file here and save the file on your phone’s internal memory
Step 3. Now Download Symphony i10 compatible Google Apps here , You need this zip file to install all the Google application on your i10.
Step : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Cyanogenmod 13 For i10 zip file that you downloaded on step 2, after that select Add more zips option and select GApps.zip > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Now your phone is running on the official CM 13 Android 6.0 Marshmallow. Enjoy!
Credits:
*Cyanogenmod Team*
*M.A.D Team*
*Android Matrix Development*
*Droidpeepz Inc*
*Hasin Rayan ZIdni (i10)*
*Nana Iyke Quame (W4)*
*Kbd Md Rasel (GH6)*
Click to expand...
Click to collapse
Is it gonna work for walton f7? Mt6580m marshmallow
Nazmuloff said:
Is it gonna work for walton f7? Mt6580m marshmallow
Click to expand...
Click to collapse
yes....you need to port it first
Hey dude! I would like to test this rom but first i need to know how the good the ram usage is! (If you could post a screenshot with the running procceses it would be helpfull )
ntouris3 said:
Hey dude! I would like to test this rom but first i need to know how the good the ram usage is! (If you could post a screenshot with the running procceses it would be helpfull )
Click to expand...
Click to collapse
400/450mb ram on 1gb ram based phone...
and sorry i am currently not running on this rom
Zidni said:
400/450mb ram on 1gb ram based phone...
and sorry i am currently not running on this rom
Click to expand...
Click to collapse
Ohh ok . I asked because i ported a cm13 and i thought that the ram usage was very high with no reasson, but as you say it was 400mb then this is normal. Thanks btw!
Can you make a cyanogenmod 13 or 14 if possible for i50 please i am rooted and have twrp but i need a custom rom thanks
Can u give me cynogenmod for symphony r20
As per thread title we are able to root our GioneeP5W and Install Philz Recovery which is CWM Based.Recovery : Philz CWM-based Recovery v6.0.5.1
Few things to be noted here :- This guide is only meant for GioneeP5W
- The zip contain GioneeP5W firmware files
- Flashing on another device may cause Bootloop or Hardbrick
About :This is the Philz Recovery CWM Based Developed by Havotek. The original recovery is in *.bin format unpacking such type of format is a bit tedious task. So i some how able to extract recovery from my device(Without Root) in *.img format. The recovery you are going to use in your Gionee P5W is edited by me and is Sp flash tool flashable due to image extention. If you want to flash *.bin format files into your device use Mircale Toolbox. This recovery is modified and after flashing it with Sp Flash tool you have to Root your device in a single instance (after flashing recovery, reboot into recovery and Install SuperSU.zip). This new recovery root your device and does not interfere with System Security against Root. This means after Rooting, device still thinks that it is Unrooted and Secure. System doesn't warn you against root and doesn't provide an OTA Update repair. It doesn't break normal OTA Update functionality. In System Manager app you can see their is no RED Tringale icon which holds "Rooted" Text inside it. For more info check Screencaptures, attached below:silly:.
Contents :- Requirement
- Features
- Bugs
- Installation Procedure
- Downloads:cyclops:
- Credits
Requirement :- A GioneeP5W
- Running on Android Version 6.0 (V8145 or V8163)
- Sp Flash Tool
- Installed VCOM, Preloader, CDC Drivers in your PC
- USB Cable
Features :- Install Recovery
- Root Device
- Prevent System From Detecting Root
- Get Superuser Request from rootfs (/su/bin/su)
- no (/system/bin/.ext/su : /system/xbin/su)
Bugs :- Not Found Yet
Installation Procedure :- Switch Off Your Device
- Unpack Zip file (Contain Scatter file.txt, recovery.img, Preloader.bin)
- Open Sp Flash Tool
- Locate Scatter File
- Connect Device With USB
- Click On Download Button in Sp Flash Tool
- Hit Device Power Button Once
- Wait Until Sp Flash Tool Complete Flashing Process
- After Flashing
- Disconnect & Reboot
Download Link : Philz Recovery Modified :https://drive.google.com/file/d/0B0Oo-yXGY-zURmdaYVZEY0N1ems/view
SuperSU :https://drive.google.com/file/d/0B0Oo-yXGY-zUc1VYcmRUNm1DdXM/view
Original Thread Link :
https://forum.xda-developers.com/showthread.php?t=1538053
https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
Original Preloader,Boot and Recovery :https://drive.google.com/file/d/0B0Oo-yXGY-zUZjdqQVF3dkgwMGs/view
Credits :
@havotek
@Chainfire
@supersuRelease
Note : - if you want to revert
- Download Zip containing Original files and Install with Miracle Toolbox
- Check this forum, How to flash something in Miracle Toolbox
https://forum.hovatek.com/thread-13894.html
PHONE SPECIFICATIONS :
MODEL: LAVA V23GB
KERNEL VERSION : 3.18.19
ANDROID 6.0
STAR OS
MT 6735M
The rooting method is for the phone with above specifications
ROOTING METHOD
1)FLASHING TWRP
2)FLASH SUPERSU
TWRP FLASHING:
LAVA V23GB is a very good phone and has very good configuration but it is less popular and less used by developers because of other similar models like lava pixel v2 2gb and lava pixel v2 3gb.
So I made the twrp myself.
Inorder to flash twrp u have to install spflash tool in your pc
After installing spflash tool run flash_tool.exe select scatter file and tick on recovery (download link for twrp and scatter file below)
Then keep download only and click download button and connect your phone to pc
The flashing process will start automatically
After flashing twrp dont power on your phone. Just disconnect the usb and enter into recovery mode by clicking power + volume button and select recovery mode (If u simply power on your stock recovery would replace twrp so dont directly power on)
Now u will enter into recovery mode
Thats it u flashed twrp
2)flashing Supersu :
Download the supersu zip file and copy it to sd card
Then go to recovery mode into twrp
Click install and select storage and select sd card then select the supersu.zip file and swipe to flash
Clear cache/dalvik cache
Then reboot your phone
Your phone will be rooted. you can check using root checker app
Download links :
Twrp and Scatter file :https:// drive .google .com/ open?id=0B_Ic1h9dY4J8VVNtWDB1dmt2UDQ (remove spaces )
Supersu : https:// drive.google.com/ open?id=0B_Ic1h9dY4J8WWRGN0k5dUZ4aVE
Twrp made by Azizur Rehman Shikdhar
Ported by Mudunuri Sriram (me)
Porting guide by Keng Natan Singse and Utkarsh
My contact details
fb.com/ mudunurisriram
phone no:8106357947
thanx a lot man..
please make scatter file and twrp for lava x81 also i will be very thankful of you
send the stock recovery
GAGAN MALLI said:
please make scatter file and twrp for lava x81 also i will be very thankful of you
Click to expand...
Click to collapse
send the stock recovery
Greetings.
Actually I have a Xperia L c2105 with android 4.2.2. and kernel Stock
I want to upgrade to Android 5 or 6. but I have not been able to find the files
I have the bootloader unlocked but I still lack root and install recovery
I've been looking for a lot of information but most of the download links are broken
I appreciate you can help me with genuine link
Root
CWM kernel or any recovery
And the room more stable.
A version of kenerl that can be rooted properly with FlashTool for linux since I also get a lot of information but for windows.
I again appreciate your help.
First of all make sure that you have unlocked bootloader and 15.3.A.1.17 version of stock rom because it is good to have latest stock rom before flashing a custom one.
1. Root your device using Towelroot (from geohot ) -> LINK - ignore expired certificate, download .apk, install and root + install SuperSU
2. Install Recovery Installer (from corphish) -> LINK and give it root permission
3. Choose a custom recovery to install in 'Recovery Installer' - TWRP 3.0.2-0 downloaded from here -> LINK and placed on your sdcard0 or sdcard1
4. Reboot and enter recovery by pressing vol- or vol+ on sony logo and purple LED -> Do a factory reset, wipe caches, prepare to flash custom rom
5. Flash from .zip CyanogenMod from sdcard0 or sdcard1:
● 12.1 (5.1.1) -> LINK * the lightest
● 13.0 (6.0.1) -> LINK
● 14.1 (7.1.2) -> LINK
6. Flash gapps from -> LINK - choose ARM + version + pico
7. Reboot, wait, enjoy