As per thread title we are able to root our GioneeP5W and Install Philz Recovery which is CWM Based.Recovery : Philz CWM-based Recovery v6.0.5.1
Few things to be noted here :- This guide is only meant for GioneeP5W
- The zip contain GioneeP5W firmware files
- Flashing on another device may cause Bootloop or Hardbrick
About :This is the Philz Recovery CWM Based Developed by Havotek. The original recovery is in *.bin format unpacking such type of format is a bit tedious task. So i some how able to extract recovery from my device(Without Root) in *.img format. The recovery you are going to use in your Gionee P5W is edited by me and is Sp flash tool flashable due to image extention. If you want to flash *.bin format files into your device use Mircale Toolbox. This recovery is modified and after flashing it with Sp Flash tool you have to Root your device in a single instance (after flashing recovery, reboot into recovery and Install SuperSU.zip). This new recovery root your device and does not interfere with System Security against Root. This means after Rooting, device still thinks that it is Unrooted and Secure. System doesn't warn you against root and doesn't provide an OTA Update repair. It doesn't break normal OTA Update functionality. In System Manager app you can see their is no RED Tringale icon which holds "Rooted" Text inside it. For more info check Screencaptures, attached below:silly:.
Contents :- Requirement
- Features
- Bugs
- Installation Procedure
- Downloads:cyclops:
- Credits
Requirement :- A GioneeP5W
- Running on Android Version 6.0 (V8145 or V8163)
- Sp Flash Tool
- Installed VCOM, Preloader, CDC Drivers in your PC
- USB Cable
Features :- Install Recovery
- Root Device
- Prevent System From Detecting Root
- Get Superuser Request from rootfs (/su/bin/su)
- no (/system/bin/.ext/su : /system/xbin/su)
Bugs :- Not Found Yet
Installation Procedure :- Switch Off Your Device
- Unpack Zip file (Contain Scatter file.txt, recovery.img, Preloader.bin)
- Open Sp Flash Tool
- Locate Scatter File
- Connect Device With USB
- Click On Download Button in Sp Flash Tool
- Hit Device Power Button Once
- Wait Until Sp Flash Tool Complete Flashing Process
- After Flashing
- Disconnect & Reboot
Download Link : Philz Recovery Modified :https://drive.google.com/file/d/0B0Oo-yXGY-zURmdaYVZEY0N1ems/view
SuperSU :https://drive.google.com/file/d/0B0Oo-yXGY-zUc1VYcmRUNm1DdXM/view
Original Thread Link :
https://forum.xda-developers.com/showthread.php?t=1538053
https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
Original Preloader,Boot and Recovery :https://drive.google.com/file/d/0B0Oo-yXGY-zUZjdqQVF3dkgwMGs/view
Credits :
@havotek
@Chainfire
@supersuRelease
Note : - if you want to revert
- Download Zip containing Original files and Install with Miracle Toolbox
- Check this forum, How to flash something in Miracle Toolbox
https://forum.hovatek.com/thread-13894.html
Related
*******TWRP 3.0.2 CUSTOM RECOVERY FOR MICROMAX CANVAS NITRO 2 E311********
***********FEATURES********
*All TWRP 3.0.2.0 features
*Ability to flash images
*Flashing ZIPs
*Real Terminal Emulator
*Completely new theme
*Many Languages
Download Link ====> https://drive.google.com/file/d/0B7TagjwwTse0S2hhRko5bjBRems/view?usp=drivesdk
========= INSTRUCTIONS TO FLASH ==========
* OPTION 1 (Using PC)
1.Open SP flash Tools.
2.Click scatter loading and select the scatter.txt ( Search XDA/ Google on how to use the tool ; you will have to download the firmware first and replace recovery.img in it with the provided recovery.img)
3.Use the provided recovery. img to flash recovery partition only (by unchecking everything except recovery)
*OPTION 2 (USING PHONE)
1.Download Mobile Uncle Tools.
2.Copy recovery.img to SD card.
3.Flash the copied IMG via the respective tools.
***CREDITS**
TWRP TEAM
AKASH JASANI
ME (ASHISH GUSAIN) FOR SHARING
****Stats****
Recovery version - 3.0.2.0
Screen resolution- 720p
Status - STABLE.
Need appropriate twrp for porting to micromax e453
I cant find a twrp with mtk 6753 and resloution of 1080x1920.
Can someone plzzz send them or help me to find them
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 6.0)
- V3.03: https://mega.nz/#!TYMyTA5Y!humI30xK0HIz1y5WfnALlK72AAiOtb4NiRzn3y2Fgqs
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Download Only" instead.
Previous Releases:
- Not yet.
Flash Tool
- SP Flash Tool v5.1628 for Windows & Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP 3.0.3: https://forum.xda-developers.com/showpost.php?p=70546519&postcount=5
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
Thanks Alberto, i managed to build a TWRP and a CTR recovery for U300.
Unfortunately TWRP have no working touch because of a kernel issue, but you can use OTG mouse to work on this... Later i will try with latest 3.03 rom and share with community. Regards
megthebest said:
Thanks Alberto, i managed to build a TWRP and a CTR recovery for U300.
Unfortunately TWRP have no working touch because of a kernel issue, but you can use OTG mouse to work on this... Later i will try with latest 3.03 rom and share with community. Regards
Click to expand...
Click to collapse
For @jemmini : another device with the same touch issue.
U300 CTR and TWRP recoveries:
https://mega.nz/#!iUdTUb7D!PNZQSPwS3psOWxzBa79AB1qbJ2Si7Qh3aQTUwVmEsww
Download and Install correctly Mediatek Preloader drivers before using Flashtool
( Take care on Windows 8.1/10 drivers, you need to disable driver signature before install
https://www.youtube.com/watch?v=50pD0mONm44
http://laurentiumihet.ro/technology...-for-32-64-bit-drivers-installation-tutorial/
https://thebroodle.com/microsoft/windows/install-mediatek-mt65xx-usb-vcom-drivers-windows-8-8-1/
Pre Requisite: Unpack all files in a directory on desktop;
- Rename U300 Carliv CTR.img into Recovery.img (if you wanto to flash CTR recovery)
- Rename U300TWRP 3.02 No Touch.img into Recovery.img (if you wanto to flash TWRP recovery, but remember that you need OTG Mouse to use this recovery)
1- With flashtool load MT6750_Android_Scatter.txt
2- Select download and connect smartphone to pc (smartphone must be powered off)… in few seconds will start the process and the new CTR/TWRP will be flashed
P.S after flashing, enter immediately in CTR/TWRP at boot using POWER and VOL + keys at the same time until Logo; it will appear a text menu with 3 options, choose Recovery (first row) with vol- and wait the loading of Custom Recovery.
Please NOTE that CTR recovery could access internal memory that is named ExtraSD (so in install menu, choose zip from ExtraSD).
Move in CTR Recovery with Vol+ and Vol - and confirm with Power key.
Credits: [MENTION]carliv[/MENTION], @jemmini
TWRP 3.0.3 for UHANS U300
TWRP 3.0.3 for UHANS U300
Based on Android 6.0 firmware ver.DK9FA2FWTAG.HSA.UHANS.HB.F.SA.0105.V3.03 / Thu Jan 5 20:12:17 CST 2017
WARNING!! Strictly follow these installation instruction!
Install:
1. Flash the recovery.img using SP FlashTool
2. Enter into TWRP and Install the patch "SuperSU 2.79"
3. Reboot to the system
Thanks for sharing
Main Thread (with reviews and so on) has been replaced: https://forum.xda-developers.com/ge...ans-u300-information-reviews-5-5-fhd-t3555430
thanks
System.IMG Repack
In order to customized my UHANS U300, I already unpack and repack my System.IMG with various software, tools, script, Cygwin, android kitchen, Assayed Kitchen and also through Linux Mint and Lubuntu... but my phone stuck during boot. (Only display boot image from logo.bin). I believe my repack System.IMG's size was correct but the phone still stuck, and checksum failed. (I disable checksum by change switch from "1" to "0".
Can anybody help me, how to get rid of these?
Thanks in advance guys.
I bought it off ebay cheap (for £35) even though it's almost £200 on gearbest etc. I don't think people would want to clone this phone but wondered how it could be that cheap. My kernel version: 3.18.22 is this the latest update for the phone? I did a factory reset since when I got it it was already set up (even though sold as new) I could see an after-image of the Chinese seller so wanted to be safe rather than sorry. Hope someone can help in getting the most out of this phone/remove bloatware etc and how to check everything's ok?
Also any way to upgrade Android?
PHONE SPECIFICATIONS :
MODEL: LAVA V23GB
KERNEL VERSION : 3.18.19
ANDROID 6.0
STAR OS
MT 6735M
The rooting method is for the phone with above specifications
ROOTING METHOD
1)FLASHING TWRP
2)FLASH SUPERSU
TWRP FLASHING:
LAVA V23GB is a very good phone and has very good configuration but it is less popular and less used by developers because of other similar models like lava pixel v2 2gb and lava pixel v2 3gb.
So I made the twrp myself.
Inorder to flash twrp u have to install spflash tool in your pc
After installing spflash tool run flash_tool.exe select scatter file and tick on recovery (download link for twrp and scatter file below)
Then keep download only and click download button and connect your phone to pc
The flashing process will start automatically
After flashing twrp dont power on your phone. Just disconnect the usb and enter into recovery mode by clicking power + volume button and select recovery mode (If u simply power on your stock recovery would replace twrp so dont directly power on)
Now u will enter into recovery mode
Thats it u flashed twrp
2)flashing Supersu :
Download the supersu zip file and copy it to sd card
Then go to recovery mode into twrp
Click install and select storage and select sd card then select the supersu.zip file and swipe to flash
Clear cache/dalvik cache
Then reboot your phone
Your phone will be rooted. you can check using root checker app
Download links :
Twrp and Scatter file :https:// drive .google .com/ open?id=0B_Ic1h9dY4J8VVNtWDB1dmt2UDQ (remove spaces )
Supersu : https:// drive.google.com/ open?id=0B_Ic1h9dY4J8WWRGN0k5dUZ4aVE
Twrp made by Azizur Rehman Shikdhar
Ported by Mudunuri Sriram (me)
Porting guide by Keng Natan Singse and Utkarsh
My contact details
fb.com/ mudunurisriram
phone no:8106357947
thanx a lot man..
please make scatter file and twrp for lava x81 also i will be very thankful of you
send the stock recovery
GAGAN MALLI said:
please make scatter file and twrp for lava x81 also i will be very thankful of you
Click to expand...
Click to collapse
send the stock recovery
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
HOW-TO Root, Install Custom Recovery (TWRP) and Restore Stock ROM guide: https://docs.google.com/presentation/d/1NJcDBkLk8zMwyv2BTqRjn2NB_ZOWKjP1fRpSVr44Oxk
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 7.0)
- 20170914 V3.06: https://drive.google.com/file/d/0B2UgfPwW3cDUZWkwLXNjUVBXbFk/view
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
None yet.
Flash Tool
- Latest SP Flash Tool for Windows and Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP 3.1.1 by @vps56 : https://yadi.sk/d/2Cskfu-M3NxP3q (no scatter included, please grab it from the Stock ROM)
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
- Magisk (flashable using TWRP): https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
I've tried to install Xposed (this exact version: xposed-v89-sdk24-arm.zip)
The device stay stuck at boot and only if I go to the recovery to install the xposed uninstaller zip I can restore the proper boot
May I ask if someone has solved this issue?
davde1 said:
I've tried to install Xposed (this exact version: xposed-v89-sdk24-arm.zip)
The device stay stuck at boot and only if I go to the recovery to install the xposed uninstaller zip I can restore the proper boot
May I ask if someone has solved this issue?
Click to expand...
Click to collapse
the
In the first place... How did you enter fastboot mode?
the link is not working
Stock - 20170914 V3.06: https://drive.google.com/file/d/0B2U...NjUVBXbFk/view
please help
Der Link funktioniert nicht mehr
how to install twrp on mnet power 1 or root it
hello. i own this device but i cannot install twrp or root it.
if i try to flash the twrp.img file, i cannot because the phone doesn't enter fastboot also if windows correctly install the drivers. it always restarts normally when i enter the "adb reboot bootloader" command (i unlocked the bootloader in the developer options).
installing twrp with spflash tool isn't possible because the stock rom from which extract the scatter file cannot be found in internet. can someone help me or suggest a windows software with which root the phone?
thanks.
Is this the stock rom or it's a custom one with some improvements?
Nowadays the phone is almost not usable with the stock rom...
ALSO, the link is dead!
Hello,
I have successfully installed TWRP and a custom ROM on a UHANS A101S. And now I want to share the files and instructions, because they come from Russian forum 4pda.ru (thanks and credits to them).
Warning: I do not take any responsibility for whatever outcome you have when trying this on your device. It worked for me, but everything you do is your own risk.
Now, here's how it worked for me:
(Instructions are for UHANS A101S only, NOT for A101)
Installation of TWRP:
1. Download TWRP recovery image for UHANS A101S. Check that you get the correct recovery.img for your firmware build. Also download the scatter file for the UHANS A101S.
2. Download SP Flash Tool and driver for UHANS A101S.
3. Install driver on your PC and reboot your PC.
4. Unpack SP Flash Tool. Unpack scatter file. Put scatter file in same folder as recovery.img file.
5. On your phone, enable USB debugging mode in developer settings. (To activate developer settings menu, tap 7 times on your build number in Settings > About).
6. Switch off phone. Remove battery. Wait for 10 seconds. Put battery back into your phone, but don't start it! Keep it switched off.
7. Start SP Flash Tool with Admin permission. Click "scatter-loading" and navigate to the folder where you unpacked the scatter file and select it. Make sure that "Download Only" is selected in drop-down menu on the left. Then click the "Download" button in SP Flash Tool.
8. Connect your phone to the USB port of your PC and press Volume Up on your phone, so SP Flash Tool will recognize it.
9. If everything goes fine, in SP Flash Tool a red progress bar at the bottom turns yellow, then green and finally you get a pop-up with a green check mark.
10. Now you can boot into TWRP. To do so, unplug phone from PC and press Power On and Volume Up simultaneously.
Download links for installing custom recovery TWRP for UHANS A101S:
Download from Mediafire
(For the recovery.img file, choose DRV.TEST version if you see this appendix in your firmware version. Otherwise, option v3.05 is correct).
If you want to restore stock recovery, recovery image from firmware version 3.05 is available too.
To install custom ROM, download your preferred ROM, copy it to your phone and flash from within TWRP.
Custom ROMs for UHANS A101S:
CLEAN MOD (Stock ROM without bloat)
MOKEE ROM (Gapps: no, root: no)
Resurrection Remix 5.7.4 (Gapps: no, root: yes)
To get Google Play store, flash Gapps package.
Download Gapps package here (choose ARM and Android 6.0):
http://opengapps.org
(Pico or Nano package recommended).
If you want root access and if it's not included in the ROM, you can flash SuperSU Zip using TWRP:
SR2-SuperSU-v2.79-SR2-20170103215521.zip
Stock ROM from UHANS (via SP Flash Tool):
https://mega.nz/#F!lX5BGKJS!pVksNANFfS2R8Jrpy6O1XQ
Source: http://www.uhans.cc/Service/index
A new custom rom
Hey guy! Thanks for your ROMs, I have Uhans A101S and they worked properly but I wanted to try something else with a google stock experience and so I wanna ask you if you can create another custom ROM (like lineage os) for this device.
Thanks a lot!