Hey Guyz,
I found a new way to revert back to MIUI V5 from MIUI V6.
As me many of us hav very slow internet connection due to which we are not able to download via TWRP recovery Manager. To avoid downloading i found new way
## First, you have to root your phone.
Steps:
Download the file Root_HM1S_MIUI6_Global.zip and put it in root of sdcard (Use internal)
Launch the Updater app
From the menu select 'Choose update package', and navigate to root of sdcard and select Root_HM1S_MIUI6_Global.zip
The updater app now reboots into the recovery, installs the update and then reboot
After the reboot has finished, You will able to see a new app namely SuperSU.
Open it one popup will aris and choose 'Continue' to update the SU binary
7. In the next dialog select 'Normal' and an updated su binary will get installed
8. Finally confirm to 'Reboot' after the successful installation
## Now Download Flashify App
## After that download TWRP or Philz Recovery and extract it
##There u will find the recovery.img file navigate it to root of sdcard
##Now Open Flashify App
##Select Recovery image
##There Select choose a file
##And navigate to the Image and select it..
##Wait for few seconds popup will appear Flash complete and there select reboot now
##Now you will reboot to recovery
For TWRP Recovery:
#Now open recovery and go to wipe. And go to advance menu and wipe you all data internal storage an everything except external storage.
#After successfully wipe your phone. Go to reboot menu and reboot to recovery. It will back you again to TWRP recovery.
#Now select install. And it will show your phone storage but you can go up lavel A and choose external_SD and select your download v5 ROM.
#After select the ROM flash it....
#And it will successfully flash(it may take some time) and now touch reboot option below.
#Successfully Reverted back to MIUI V5
For Philz Touch Recovery
#Navigate to Wipe and Format Option
#Select Wipe Cache , Dalvik Cache, And then Select Factory Reset
#After that Select "Clean to Install a New ROM"
#Now Select ++++Go Back++++
#Select Install Zip
#Choose zip from external sdcard and Select the ROM
#Wait for few minutes and then reboot
#Successfully reverted back to MIUI V5..
Find my post on MIUI:-
http://en.miui.com/thread-147144-1-1.html
:angel:
Hit Thanks If I helped you
no matter which custom rom I flash, always gets stuck in bootloop
I'm not new to flashing roms and stuffs. I'm on CM11 on RedMi 1S. Now whenever I tried a different rom(say CM12.1) even after following each instructions correctly, the phone always gets stuck in bootloop( the CM avatar). Please help me out from this problem. I'm using TWRP.
Related
Hi、iam just newbie here
i want to flash merruk kernel but i not know how to do it
Anyone can give me a.tutorial please?flashing kernel via odin
thanks:beer:
Model:Galaxy Y
Custom ROM:Tigra v4
Kernel;Dual Tigra 3
Base Version;DXLA1
Download the following and place to the Root Of SD card
CWM
KernelUpdate.zip
Ext4
MerrukTechnology v2.0 Pre-Final(boot.img ONLY)
System 1.0.8
(Note : For system 1.0.8 it contains "system" folder, extract that folder and place in root of SD card)
Now we are all set
1. Turn off phone and boot into CWM
(Note: To boot into CWM press Vol Up, Home, and Power at the same time and in the stock recovery choose update from zip and select the CWM.zip)
2. Once in the CWM recovery, simply choose install from zip and select KernelUpdate.zip
(Note : Kernel Update.zip looks for a boot.img file in SD card and flashes it)
3. After successful kernel up press power to return to CWM
4. Press Reboot now, and your kernel is updated
5. Reboot twice and it will automatically delete the system folder in SD card
ext4 is optional:
6. Repeat step 1 and select install from zip, this time choose the Ext4.zip
7. Press power to return to CWM and Press Reboot now
hi there,
i know you are experiencing issues with your SGY but please post in the right place,
here:http://forum.xda-developers.com/showthread.php?t=1675474&page=10
im sure if you post there senior members and recognized contributors will get on your issue right away
this is a development related thread,
thank you
Mokee android 7.1 .1 for lenovo A6010 plus [camera and flash work]
Download rom for a6010 plus:
open gapps pico:
INSTALL USING TWRP
1. Download and transfer the ROM and Gapps files to internal storage.
2. Boot your device into TWRP recovery. You can simply Google how to enter recovery mode on your device.
3. In TWRP recovery, click on Wipe » Advanced Wipe. Here select the following options shown in the screenshot below. Do not select the option which reads ‘Internal Storage‘ at any cost, as it will wipe off EVERYTHING, including your ROM file.
4. Go back to TWRP main menu, tap on Install and select the rom Zip file that you transferred to your device in Step 1.
5. After selecting the .zip file, do Swipe to Confirm Flash on the bottom of the screen to begin the custom ROM installation process. This may take some time.
6. Once your ROM is successfully flashed, you’ll see Wipe cache/Dalvik option, select it and then do Swipe to wipe on the bottom of the screen.
7. Now flash the rom Gapps file similarly like you flashed the ROM file.
8. After flashing both ROM and Gapps files, reboot your device.
ahmed2014011 said:
Mokee android 7.1 .1 for lenovo A6010 plus [camera and flash work]
Download rom for a6010 plus:
open gapps pico:
INSTALL USING TWRP
1. Download and transfer the ROM and Gapps files to internal storage.
2. Boot your device into TWRP recovery. You can simply Google how to enter recovery mode on your device.
3. In TWRP recovery, click on Wipe » Advanced Wipe. Here select the following options shown in the screenshot below. Do not select the option which reads ‘Internal Storage‘ at any cost, as it will wipe off EVERYTHING, including your ROM file.
4. Go back to TWRP main menu, tap on Install and select the rom Zip file that you transferred to your device in Step 1.
5. After selecting the .zip file, do Swipe to Confirm Flash on the bottom of the screen to begin the custom ROM installation process. This may take some time.
6. Once your ROM is successfully flashed, you’ll see Wipe cache/Dalvik option, select it and then do Swipe to wipe on the bottom of the screen.
7. Now flash the rom Gapps file similarly like you flashed the ROM file.
8. After flashing both ROM and Gapps files, reboot your device.
Click to expand...
Click to collapse
Could you please supply direct links, ppc links are not allowed on xda
Regards
Sawdoctor
Hi,
Uploading TWRP for Micromax Bolt Supreme Q300
Stock Recovery also attached.
Download both img files and save it in Phone's SD Card.
Step to flash
1- Get root by KingRoot APK - Easily available by google search.
2- after getting root, install Flashify from PlayStore.
3- Open Flashify, go to Flash then select recovery image
4- From Flash Recovery pop up - select choose file.
5- now browse to the location where you had saved TWRP img file.
6- select TWRP img or stock which ever you want.
7- after selecting img file, confirmation will be asked, say YUP!
8- Flashify will flash TWRP recovery on phone and will ask for reboot.
9- Dont reboot now, from top corner menu, select reboot to recovery and test it.
Link for Recoveries - https://drive.google.com/open?id=1-4MfVO-zBIhHg1FiaC4w0SLmgO5luv8p
arre wah.. yahan bhi..
Step by Step Installation of/Upgrade to Android Pie Custom Roms
Following this guide, you will lose all your data if haven't backed it up yet!!
Also NO USING GSI PIE!!!
Requirements:
- Twrp is already installed.
What you need:
- LineageosTWRP (Attached to thread)
- Custom Rom (can be found here)
- Open Gapps (Pico or Nano)
Only if Root is wanted: Chose either of them
Magisk(Recommended) or SuperSU
- A brain and a body
- The Knowledge that you will wipe your phone by doing this. Be Warned.
Installation:
1. Backup all the files that you have either by copying them to a usb drive ,a micro SD or your computer.
2. Check that all files are copied successfully and can be opened or viewed.
( Some apps have a cloud synchonisation feature, use it if you have it as an option since it is really helpful!)
3. Now, get your preferred rom, gapps and if wanted, your root method ready, also unzip the twrp file aswell.
Copy them to your micro SD.
4. Boot into twrp via adb or by using some app(root needed).
In Twrp, go into wipe option, then select change file system. Change file System to ext4.
4.1 Now use Twrp Reboot-Menu Option to reboot into recovery(twrp) again.
4.2 Wipe system, data, cache and dalvik-cache partitions using the Wipe option
5. Go into Install Option and Press on "Install IMG" , select pietwrp image and flash it. (The name should be lineagerecovery.img or something if downloaded via telegram)
(If you don't have it yet and are in the Lenovo P2 Telegram group, type #pietwrp in chat and make sure to safe it to your download folder. Otherwise it's also attached to this thread.)
6. Reboot back to recovery like you did in step 4.1.
7. Now install your rom and gapps.
8. Wipe cache and then reboot .
9. Setup your phone and Enjoy.
( For Root, reboot to recovery. Flash your Root Method, wipe cache and reboot)
Enjoy and thank your Devs
FAQ
Q: Instructions unclear, phone stuck in bootloop
A: Either do this:
Download this folder and use one of the two ".bat" files. Boot into Bootloader via Volume Down and Power Button. --
It will flash S048 Firmware of our Lenovo P2, after the flash-process is finished it will boot up on its own. Recommended: Do all the ota updates via ota app.
Or: Boot into bootloader, via adb cmd prompt use: fastboot boot lineagerecovery.img , then use reboot menu to reboot into twrp. Clean Wipe phone(Wipe system,data, cache and dalvik-cache Partitions) and try flashing your Rom etc. again.
Q: Instructions unclear, hardbricked my phone!!
A: Thaat shouldn't have happened. Did you screw up somewhere?...
Luckily you backed up your most important files!
If you have downloaded some custom rom for Lenovo a3300-GV but unable to flash through TWRP then you should follow these steps.
[NOTE: You must have Stock Rom installed ]
Instructions 1.Uninstall any other root app then restart your tablet
2.Install Super SU [latest version]
3.Download and install Flashfire
4.Put the custom rom in your external SDcard
5. If flashfire is not opening then set date to 10-october-2015
6.Select install And locate your rom (the .zip file)
7.After that select wipe option and select every thing is expect external sd and otg.
8.Then Hit the flash.:laugh:
9.A black screen or bootanimation may appear then a screen with bunch of text wil appear (it's only file system tree) don't panic.
10.Then a screen with flashfire name it will show everything that a recovery shows.
Afterward the tab will reboot and you will be able to see the bootanimatin of custom rom.:victory:
But if you face bootloop issue after reboot then go-to TWRP and factory reset it
Your Bootloop will be solved:fingers-crossed:
I tried this method so it is Bug Free procedure:laugh: