Do All The Following At Your Own Risk. I Will Not Be Responsible In Any Case.
Click to expand...
Click to collapse
Rooting
1.Rooting i9 stock rom is very simple, download the framaroot app attached below
2.Install framaroot
3.Open framaroot and select install supersu
4.Choose the 3rd method (Barahir)
5.Now install busybox if you want
6.You are now rooted
For KitKat Update Click Here
Credits
umangleekha
Custom Recovery
This app requires root privileges, which means that your phone needs to be rooted. Busybox is also required, which can be obtained from PlayStore.
USE THIS APP TO...
Install TWRP for i9
Install CWMR for i9
Install stock recovery
HOW TO USE
Download the apk file
Install in your i9
Once installed, launch the app "RIO Recovery Installer"
Tap the recovery of your choice from the set of buttons
Confirm to Install
Reboot to recovery to test
http://www.mediafire.com/download/b99962l7273y4du/MPRioRecoveryInstaller.apk
Credits
ng0tkul4
Battery Mod
You must have noticed that about 4% battery is drained till morning when phone is in standby, a simple buildprop tweak can solve this and now my phone drains only 0% OR 1% battery in standby overnight, just follow the steps below-
1.You must be rooted before doing this
2.Download root browser from playstore
3.Open Root Browser.
4.Scroll down and open system folder
5.Open build.prop, you will see a menu asking how to open the file, select Text Editor
6.Now be very careful, don't make any mistake here
7.Scroll to the bottom and type "pm.sleep_mode=1"
8.Now press back button twice then press yes to save the changes and restart
9.Now enjoy no battery drain
Credits
umangleekha
Stock ROM
1) Download the ROM from the link https://mega.co.nz/#!YwBRkCxB!hTSU0eqI-zMwufgqug2qaHpVrTutXnPCn4rPVJfAtEM.
2) Once you have downloaded the ROM File, mount your phones SD card and and copy over the .zip file.
3) Power off the device and then boot up to recovery.
4) In your phone's custom recovery, locate the menu options which allow you to wipe the phone and wipe cache.
5) Once your phone has been wiped go back up to the root of the menu and select 'Flash Zip from SD Card' the text may be different per Recovery.
6) Locate the ROM .Zip file you wish to flash.
7) Confirm the flash by following the on-screen instructions.
8) If no errors arise during the flashing process then the ROM flash was successful, Reboot the device.
Credits
malick186
Miui ROM with OTA updates
Features:
Official MIUI V5
Nokia Keyboard
Official OTA updates
Extreme Scrolling
Init.d Support
Zipaligned
1) Download the ROM from the link http://d-h.st/Pc2
2) Once you have downloaded the ROM File, mount your phones SD card and and copy over the .zip file.
3) Power off the device and then boot up to recovery.
4) In your phone's custom recovery, locate the menu options which allow you to wipe the phone and wipe cache.
5) Once your phone has been wiped go back up to the root of the menu and select 'Flash Zip from SD Card' the text may be different per Recovery.
6) Locate the ROM .Zip file you wish to flash.
7) Confirm the flash by following the on-screen instructions.
8) If no errors arise during the flashing process then the ROM flash was successful, Reboot the device.
OTA Updates
Click Here For Updates
Credits
INCPAK Team
helloansuman
Custom ROMs
Reserved For More ROMs
KitKat Rom For i9
For Updating QMobile i9 to KitKat Follow This Link
KitKat QMobile i9 Link
Need some help bro! Whenever flash the miui rom my internal sd card dnt get mounted! Any workaround which you know??? reply asap!
Sent from my MIUI using XDA Free mobile app
Ya there is an issue in some cell phones about miui if you are using the miui I provided then use miui for s5501 or mmx120 version it will solve your problem but dont use miui for wiko rainbow
qwerfaseeh said:
Ya there is an issue in some cell phones about miui if you are using the miui I provided then use miui for s5501 or mmx120 version it will solve your problem but dont use miui for wiko rainbow
Click to expand...
Click to collapse
Can you share the link in which sdcard is working??
Sent from my RAINBOW using XDA Free mobile app
malick186 said:
Can you share the link in which sdcard is working??
Sent from my RAINBOW using XDA Free mobile app
Click to expand...
Click to collapse
Use this miui rom and update it with OTA it has no bugs
http://d-h.st/Pc2
QMobile i9 is now supported by MIUI India so visit to get latest updates
http://forum.miui.co.in/viewtopic.php?t=1492
For the new taste of miui 6 use a theme called miui v6, search in the theme app of miui
qwerfaseeh said:
For the new taste of miui 6 use a theme called miui v6, search in the theme app of miui
Click to expand...
Click to collapse
i installed this lewa os v1 rom on i9 sim card not detect after restore imei can you please help
https://www.facebook.com/notes/myph...gua-rio-versions-v0-v1-and-v2/288315014697928
To restore imei you need to have busybox installed check that it has busybox installed or not and use latest version of MTK droid tools
Original QMobile i9 Rom
Please Upload Q Mobile i9 Original(official) ROM with Default Ads-ons and everything Please Upload it!!
Its already on post
AliZaib1 said:
Please Upload Q Mobile i9 Original(official) ROM with Default Ads-ons and everything Please Upload it!!
Click to expand...
Click to collapse
Next time search before you post anything. :banghead:
Sent from my SGH-T999 using XDA Free mobile app
It is on my 2nd post, the link of which is posted on first page named kitkat for noir i9
I tried this method to install customer recovery in i9. But now my mobile isn't going into recovery. When I press both volume and power buttons it shows option to go into recovery and factory mode but then mobile just turns on if I press volume button or not. Can any one guide how to get my recovery fixed for Q mobile i9?. Thanks in advance.
qwerfaseeh said:
This app requires root privileges, which means that your phone needs to be rooted. Busybox is also required, which can be obtained from PlayStore.
USE THIS APP TO...
Install TWRP for i9
Install CWMR for i9
Install stock recovery
HOW TO USE
Download the apk file
Install in your i9
Once installed, launch the app "RIO Recovery Installer"
Tap the recovery of your choice from the set of buttons
Confirm to Install
Reboot to recovery to test
Click to expand...
Click to collapse
Android 6.0.1 for cubotx11
Android 6.0.1 for cubotx11
How to install:
1. Flash ctr or twrp recovery for your device (you can download it from the download page.)
2. You can find a guide on our website how to flash the recover via spflash. (You can use the tutourial for CM12.1, same process.)
3. Boot your device to recovery.
4. Go to mount ->wipe system and wipe data and wipe cache.
5. Reboot to recovery.
6. Install the rom and gapps in same order and same time.
7. Please dont setup the sdcard just close the notification .
8. Please use the gapps on download page (others wont work)
Fixed:
youtube 720p play back
wifi drop
GPS
Green video on Streaming
and many more
Bugs
VPN
Download:
http://www.cubotx.com/forum/viewthread.php?thread_id=73
Not the place for this.
Thread closed.
Mokee android 7.1 .1 for lenovo A6010 plus [camera and flash work]
Download rom for a6010 plus:
open gapps pico:
INSTALL USING TWRP
1. Download and transfer the ROM and Gapps files to internal storage.
2. Boot your device into TWRP recovery. You can simply Google how to enter recovery mode on your device.
3. In TWRP recovery, click on Wipe » Advanced Wipe. Here select the following options shown in the screenshot below. Do not select the option which reads ‘Internal Storage‘ at any cost, as it will wipe off EVERYTHING, including your ROM file.
4. Go back to TWRP main menu, tap on Install and select the rom Zip file that you transferred to your device in Step 1.
5. After selecting the .zip file, do Swipe to Confirm Flash on the bottom of the screen to begin the custom ROM installation process. This may take some time.
6. Once your ROM is successfully flashed, you’ll see Wipe cache/Dalvik option, select it and then do Swipe to wipe on the bottom of the screen.
7. Now flash the rom Gapps file similarly like you flashed the ROM file.
8. After flashing both ROM and Gapps files, reboot your device.
ahmed2014011 said:
Mokee android 7.1 .1 for lenovo A6010 plus [camera and flash work]
Download rom for a6010 plus:
open gapps pico:
INSTALL USING TWRP
1. Download and transfer the ROM and Gapps files to internal storage.
2. Boot your device into TWRP recovery. You can simply Google how to enter recovery mode on your device.
3. In TWRP recovery, click on Wipe » Advanced Wipe. Here select the following options shown in the screenshot below. Do not select the option which reads ‘Internal Storage‘ at any cost, as it will wipe off EVERYTHING, including your ROM file.
4. Go back to TWRP main menu, tap on Install and select the rom Zip file that you transferred to your device in Step 1.
5. After selecting the .zip file, do Swipe to Confirm Flash on the bottom of the screen to begin the custom ROM installation process. This may take some time.
6. Once your ROM is successfully flashed, you’ll see Wipe cache/Dalvik option, select it and then do Swipe to wipe on the bottom of the screen.
7. Now flash the rom Gapps file similarly like you flashed the ROM file.
8. After flashing both ROM and Gapps files, reboot your device.
Click to expand...
Click to collapse
Could you please supply direct links, ppc links are not allowed on xda
Regards
Sawdoctor
Greetings.
Actually I have a Xperia L c2105 with android 4.2.2. and kernel Stock
I want to upgrade to Android 5 or 6. but I have not been able to find the files
I have the bootloader unlocked but I still lack root and install recovery
I've been looking for a lot of information but most of the download links are broken
I appreciate you can help me with genuine link
Root
CWM kernel or any recovery
And the room more stable.
A version of kenerl that can be rooted properly with FlashTool for linux since I also get a lot of information but for windows.
I again appreciate your help.
First of all make sure that you have unlocked bootloader and 15.3.A.1.17 version of stock rom because it is good to have latest stock rom before flashing a custom one.
1. Root your device using Towelroot (from geohot ) -> LINK - ignore expired certificate, download .apk, install and root + install SuperSU
2. Install Recovery Installer (from corphish) -> LINK and give it root permission
3. Choose a custom recovery to install in 'Recovery Installer' - TWRP 3.0.2-0 downloaded from here -> LINK and placed on your sdcard0 or sdcard1
4. Reboot and enter recovery by pressing vol- or vol+ on sony logo and purple LED -> Do a factory reset, wipe caches, prepare to flash custom rom
5. Flash from .zip CyanogenMod from sdcard0 or sdcard1:
● 12.1 (5.1.1) -> LINK * the lightest
● 13.0 (6.0.1) -> LINK
● 14.1 (7.1.2) -> LINK
6. Flash gapps from -> LINK - choose ARM + version + pico
7. Reboot, wait, enjoy
Complete tutorial for installing MIUI 9 on Lenovo S850 Row version
Lenovo S850 MIUI 9 ROM : https://drive.google.com/file/d/0B3kCZJTdXnjoOURkZ3pRV1lPZlE
Lenovo S850 TWRP_3.0.2.0 : https://yadi.sk/d/IG8xTbGJshxti
Smooth and Stable with no bugs. No GAPPS needed
https://www.youtube.com/watch?v=v8Lz8mFhu7U
For installing custom recovery: https://www.xda-developers.com/how-to-install-clockworkmod
I personally suggest to install via ADB.
Steps for How to Install MIUI 9 on Lenovo S850
1. First of all, Download the ROM to your smartphone.
If you have downloaded the zip file in your computer, then connect your device to computer using USB cable.
Now move the downloaded ROM to your smartphone.
2. Now turn your phone off.
3. Reboot to recovery by pressing the Volume Down + Volume Up + Power button simultaneously.
4. Before installing the custom ROM, it’s better if you Wipe all the data by Clicking the Wipe button and Select Advanced Wipe – Tick only Dalvik/ART cache, Data and Cache. Don't tick system, you must have stock rom system to install this.
5. Swipe to WIPE
6. Now Click the Install Button to install the MIUI 9 zip file.
7. Now Browse through the files of Internal memory where you have the Zip file of Custom Rom (better move the custom ROM zip into root of your internal memory)
8. Select the Custom Rom Zip File and Swipe to confirm the installation. Then reboot.
That’s it ! Now reboot your phone. You have Install MIUI 9 on Lenovo S850. Enjoy !!!
If you have any other problem with this device, ask in this thread.
Dum Question
Sorry i'm new.
A dum question .
Is it better than original ROM ??