Related
[GUIDE][HUAWEI]Flash Any Variant & Version of Firmware on Hisilicon Kirin Chip Phones
DESCRIPTION:
Okay Guyz... Today am here with tutorial which you guyz ask for... i.e Flashing any variant or Rom Version of SAME PHONE. You can do this on phones like Honor 4C, Honor 4X, Honor 5C, Honor 5X, Honor 7, Honor 8, Mate 8, P9, P9 Lite and many other with Hisilicon Kirin Chipset
DONT EVER TRY CROSS ROMS i.e ROM OF ONE PHONE ON OTHER PHONE MODEL.
DISCLAIMER:
I will Provide correct info and help......All This you are gonna do is At your Own Risk... Damage to your device of any type is at your Own Responsibility,,, Don't point finger at me or I will Just Laugh at you...
Now you need Unlocked Bootloader for doing this as fastboot work with unlocked bootloader
If you have already Unlocked Bootloader, you may skip all these steps until BOOTLOADER UNLOCK NOW text
PREREQUISTES:
1.) First of all, You should Unlock Bootloader so that fastboot can do its job well with ease (You can unlock bootloader by simple procedure...)
2.) You need the Update.app file which you wanna flash or to shift to that.
PROCEDURE:
FOR UNLOCKING BOOTLOADER, FOLLOW THIS
Go to this site Unlocking Code website or use this if above have some problem or not working, then Use this Website
Login to this site using your Huawei id which you made in themes store or in huawei cloud!!
Use the Serial Number Written on BOX OF YOUR PHONE..!!
Fill like, smartphone>Product Model should be "The one written in your About Phone section"
then fill all fields and captcha also.. Click Submit and get the UNLOCKING CODE....
you can unlock bootloader wid that code then and root permanently....
If your product id is incorrect as website says, then Download the Attached PC Software Named "Huawei Product ID Generator" then Extract this zip file...
Now open it, fill all Info in it and it will Generate a Product ID for your Phone....
After receiving the unlock code, write down the code;
Now go in your Huawei Settings>About Phone.
Then tap on Build number 10 times,,, you will get the Developers options in Last of Settings app. Open Developers option and Turn On the USB DEBUGGING.
Now connect your device to PC in MTP/FILES mode and then install the ADB drivers for it....
To install adb drivers correctly, use the Software Adb Driver Installer from here
LINK FOR ADB DRIVER INSTALLER
Full ADB folder is also attached Below.... put this folder in drive C.
Now Direct the cursor on the folder ADB, hold Shift and the right mouse button and choose "Open Command Window";
connect your phone to the PC in the "media device";
at the command prompt prescribe
Code:
ADB Devices
then we write
Code:
ADB reboot bootloader
(the device will reboot mode fastboot);
then typed
Code:
fastboot oem unlock ****************
(where the asterisks replace unlock code);
BOOTLOADER UNLOCKED NOW!!
You need to Extract the update.app file to get BOOT, SYSTEM, RECOVERY and CUST Images
For that, Download Huawei Update Extractor tool
And then open update.app file in this tool.
Extract all above mentioned image files and move them to adb folder.
Now you need to format Data and Cache so that it dont mess with new Rom,
for that, go in Stock Recovery by keep pressing Volume Up and Power Button while phone is Switched Off.
When in recovery, wipe cache and data both and then come in fastboot mode without switching on your device.
You can do this by, while phone is Off, keep pressend volume down key and plug in the USB attached to phone.
You are in Fastboot Mode now if you have done all Correctly
Now go in ADB folder and open Command windows as told above.
Now check if you phone is Correctly attached by giving command
Code:
Fastboot devices
you should see a device attached, Now give these commands correctly one by one,
Code:
fastboot flash boot boot.img
Code:
fastboot flash recovery recovery.img
Code:
fastboot flash cust cust.img
Code:
fastboot flash system system.img
wait for this to be done, it will take some mins as file is of 2+GB size.
When done, give command
Code:
fastboot reboot
When phone will reboot, unplug usb and You are Ready to go with your Desired ROM
If any Problem, or query, Post below, i will try to solve it ASAP....
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
XDA: DevDB Information:
[GUIDE][HUAWEI] Flash Any Variant & Version of Firmware on Kirin Chip Phones
Contributors:
@HassanMirza01
@worstenbrood for the tool.
Version Information:
Status: Stable
Stable Release Date: 2016-11-24
Created on: 2016-11-24
Last Updated on: 2016-11-24
reserved
Nothing happen to me please help me i use that method nothing happen
Please help me is there a problem of my rom when i flash using fastboot original recovery of honor 4c sucess but nothing happen.. twrp my recovery i want to change it to original recovery to update .. please..
My have phone have look like deep freeze like pc
@Clearbk which stock recovery you are using ?? Give detail of your Rom nd i will provide you required data.....
But the problem is where you wanna flash other devices ROM but your cust/oem/vendor is not the same as the ROM of other device. And this causes cust flash failed.
How to solve this?
Who says other device rom ?? I didnot say anything about cross rom....
Support Qualcomm
Is that support Qualcomm processor of honor 4x
@Krish93 no.... If that phone has fastboot mode and u can get .img files then you can flash them too otherwise not.....
Yes it has fastboot mode on che1-L04 and can I flash if emui 5.0 came to 5x for 4x
Both the spec are equal but two things changes processor and fingerprint scanner only
No... Dont flash on cross plateform.... It may brick your device
Ok thanks for u r post and if we flashed this files gapps also come or mannaually install it@HassanMirza01
@Krish93 gapps includes in those images... if chinese firmware, then u need to install them manually...
hit thanks if it helps
hi
Che2-L11
imei : 866959020528964
s/n : R8QBY15408003473
need bootloader code, help
TNX
thank u very much brother... respecting u...
bor but i have a problem.
my phone has bricked by me.
and i had bootloader unlocked and twrp installed.
now, can i do this in twrp recovery?
Bricked P10Lite does not boot Variant
Hi,
I have a P10Lite with Warsaw-L03T_C654B192 that was bricked by trying to update to Warsaw-L03T_C654B198 from different carrier. I tried this method and not get the boot and liquid animation and looks like it will start but then reboots and goes to erecovery and that is useless and it says there is no image on server. Is there any advice you can give?
Flash it
Knock me at fb.
Www.fb.com/nafi220
thanks man good job
i don't have stock recovery....i only have custom recovery...plz help me....what i need to do...
this simply can´t work .. you just flash 4 partitions out of 14.....
DallasCZ said:
this simply can´t work .. you just flash 4 partitions out of 14.....
Click to expand...
Click to collapse
Sorry...thats an outdated topic... I will request moderator to close this
Hello everyone
Sorry for my English I use google translation
Here's my problem ...
I wanted to go back from a rom aosp to rom stock with my honor 8
I had big difficulty to make it go fastboot ... that is to say that I could not do it with flight - + power and adb did not want to recognize it at the beginning but I finally succeeded thanks to adb
I did the usual handling in twrp (full wipe then flash of "update_full_FRD-L09_hw_eu.zip" and "update.zip") but I had an error during the 2nd flash
The recovery stock well re-install and I flashed the rom via flight +/- and power
I had the classic problem of "no keyboard google nor bluetooth" has a bad flash of "update_full_FRD-L09_hw_eu.zip"
So I wanted to re-install twrp to properly re-flasher but the ... the pc does not detect the phone so impossible to switch to fastboot thanks to adb and it still does not want to start fastboot thanks to the combination of keys ....
The top just to do a test I have full wipe with the stock recovery then re-install the rom from the sd card and the ... it asks me my google account to be able to pass the configuration of the phone except that no keyboard n ' Is installed to enter my information ... so I have access to nothing ...
thank you in advance for your help
The bootloader is unlocked and all drivers are installed on the pc ... I already have a lot flasher with adb so the problem does not come from the pc ... Is it possible that I wipe the partition containing the fastboot?
I do not remember the error when flashing and hisuite does not dedicate the phone (which is still in the first setup)
I have already tried but the flash is much too fast and nothing is changed
Accessing the fastboot would solve all my problems
Adb does not detect the phone
The dload method does not install the keyboard
(Thank you for taking time to help me)
When I want to flash the update_full_FRD-L09_hw_eu.zip with dload it's takes only 10 seconds so I guess it's no correctly installed it's too fast
Sorry i did not see your message
I will try this
b380
I was on 380 then on the rom rros and I try to remttre in 380
it does not work The problem with fastboot can it come from usb port c?
I have already tried 3 different USB 2.0 cables with 2 different adapters + 1 true usb c + cable with 2 computers.
I have not yet tried with an older rom... Who advises me?
I managed to pass the first configuration through a physical keyboard
I do not risk to brick my phone with a downgrade without rollback?
There is a root oneclick for the honor 8? So I could flash twrp with rashr
An application for flashing directly from Android
I managed to switch to fastboot but adb does not want to install twrp
it does not work and frp is locked
I have unlock the frp and everything is back in order ... a big thank you for your help
I had the case oem grayed ... I used the tuto to unlock the frp and voila
for unlock frp:
https://forum.xda-developers.com/honor-8/how-to/fix-frp-lock-fastboot-bootloaders-t3594851
the first post is a tutorial for unlock frp
1. First Turn off your Device (If you can't then Drain The Battery)
2. HOLD Volume Down & Connect to USB ( Now your phone will boot to fastboot )
3. DOWNLOAD ADB & Fastboot on your Computer. Link - https://mega.nz/#F!sSZDmYiA!RnMmcG88-nvqQj7UNPrPZw
4. Extract your stock firmware via Huawei UPDATE.app Extractor Software (Recovery only)
If you're on Marshmallow Before then extract Marshmallow Firmware
If you're on Nougat Before then extract Nougat Firmware
Huawei UPDATE.app Extractor Software
Link - https://mega.nz/#F!JGh2QLYD!Z1OG8HtbWt1i4XvL6WOt3Q
Now Copy Recovery AND paste into ADB & Fastboot FOLDER
Now DOWNLOAD TWRP
If you're on Marshmallow Before than DOWNLOAD From this link
https://dl.twrp.me/eva/twrp-3.1.1-0-eva.img.html
If you're on Nougat Before than DOWNLOAD From this link
https://mega.nz/#!1HoVmDoa!9ifPg7yfEKfCRfbVI04Qvsbt49PAjA3MO72RoD4EPnc
Now Copy twrp AND paste into ADB & Fastboot FOLDER & Rename twrp
5. Open ADB & Fastboot FOLDER
6. HOLD Shift Key & Right Click on empty place of this FOLDER
7. Click on OPEN COMMAND WINDOW HERE
8. Type - fastboot oem unlock (UNLOCK KEY) --- Skip this step if your BOOTLOADER is UNLOCKED
Now press Enter Key
9. Type - fastboot flash recovery Recovery.img
Now press Enter Key
10. Type - fastboot flash recovery twrp.img
Now press Enter Key
11. Now HOLD Volume Up & Power Button AND Release Volume Up Button when you see Huawei Logo & Just HOLD Vol Up
12. Now flash custom rom
If you're on Marshmallow Before than DOWNLOAD From this link
https://www.androidfilehost.com/?fid=457095661767122613
If you're on Nougat Before than DOWNLOAD From this link
https://www.androidfilehost.com/?fid=889764386195922724
13. Now DOWNLOAD Stock firmware (If you ALREADY DOWLOAD it then skip this step)
14. Extract Your Firmware Copy dload FOLDER & Paste into root Directory of your Memory CARD
15. Go to twrp - wipe - swipe to factory
16. Turn off your phone
17. HOLD Volume Up & Down also Power Button until your Device boot to DOWNLOAD MODE
Now your stock firmware will be installED
Enjoy you unbrick your Huawei P9
Hit the thanks :good: button if you Happy to My Work
Note — If you didn't to use Huawei UPDATE.app extractor Software then check this link
If you didn't now how to flash a custom rom then you should learn it before flashing
Hi,
I was on B386 before (Nougat)
Flashing RR-N-v5.8.4 gives this error:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
Updater process ended with ERROR 7
Any idea ?
Thanks !
PS : This error also prevents me to install B390, B383, B182. Only B360 can be installed from TWRP.
XavierP56 said:
Hi,
I was on B386 before (Nougat)
Flashing RR-N-v5.8.4 gives this error:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
Updater process ended with ERROR 7
Any idea ?
Thanks !
PS : This error also prevents me to install B390, B383, B182. Only B360 can be installed from TWRP.
Click to expand...
Click to collapse
Try to install Lineage 14.1
problem
my p9 i do the things as you saying but it when it goes on fastboot stack on screen your devise is booting now...wont open and at adb says waiting for devise nothing else what to do ?
To get into fastboot mode you keep the phone plugged into computer and hold power and volume down until you get to the white fastboot screen.
There is no need to wait for the battery to drain as you can just force shut down a phone using power + volume down holding.
Huawei p9 EVA-L09
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Follow my guide, post #7! Leave feedback and a thanks!
https://forum.xda-developers.com/showpost.php?p=74169408
phone is booting but screen doesnt turn on
the phone is booting and dload method is working but the issue is the screen is just blank after huawei logo but is not in loop as it is not booting continuosly its blank forever
nothing helps
Hi
I came here because i tried to install miui on my P9 via trwp , somehow it wasnt mountable and after searching the internet i found the solution was to change the filetype.
Sadly i forgot that this would delete my backup, which happened and the miui still wasnt mountable.
I tried your method but after a few miliseconds of the forced update it gets an error and stops.
Or lets say i tried your method while being in trwp recovery mode because otherwise no devices are being detected by adb tool.
i tried to install a p9 stock rom but i cant even mount that one, somehow nothing works.
I seriously dont know what to do anymore.
Try this...
Try to flash downgrade firmware...
Rollback Instructions
Step 1. Download the appropriate rollback firmware
Step 2. Copy the extracted dload folder to the external storage of your phone (micro sd card).
Step 4. Disconnect the USB cable and turn your phone off.
Step 5. Now hold Volume up + Volume down + Power buttons until the installation screen appears.
Step 6. When the phone restarts after completing the installation, your firmware version should now be “B300”.
Step 7. Try to find oldest marshmallow firmware and flash it using same way...
I want to android 6.0 as twrp. How ? Pls
That is only for unlocked bootloader??
Link in Step 12 for Nougat s broken
JaayTee said:
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Click to expand...
Click to collapse
Same problem plzzzzzzzzzz help!!!!
I can't access anything but "your device is booting now" screen - after this phone automaticly shuts down
pls help!!!
Trying to follow the guide but cannot even get to fastboot mode.
Trying to follow the guide but cannot even get to fastboot mode.
With phone off and pressing down-vol and power, it gets straight to:
Func NO: 11 (recovery image) Error NO: 2 (load failed!)
Am i doing something wrong? Help appreciated.
Cheers
Bricked p9
Blak Rider said:
Same problem plzzzzzzzzzz help!!!!
Click to expand...
Click to collapse
JaayTee said:
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Click to expand...
Click to collapse
Hello
I have exactly the same problem.
OTA with dload doesnt work - dont load ota recovery,just huawei logo loop
fastboot recovery is booted, but when I try steps in main thread I getting Error : Command Not allowed even if I try unlock the bootloader.
Do have somebody solution for it? Every idea is good. I dont want to put this phone to the trash
Thank You
mdoom said:
Hello
I have exactly the same problem.
OTA with dload doesnt work - dont load ota recovery,just huawei logo loop
fastboot recovery is booted, but when I try steps in main thread I getting Error : Command Not allowed even if I try unlock the bootloader.
Do have somebody solution for it? Every idea is good. I dont want to put this phone to the trash
Thank You
Click to expand...
Click to collapse
In Fastboot, is it FRP locked and/or Bootloader locked?
zgfg said:
In Fastboot, is it FRP locked and/or Bootloader locked?
Click to expand...
Click to collapse
both are locked.
When i try to unlock bootloader,i getting the error message.
FRP lock is not possible to unlock becouse phone dont wont start.
any chance?
mdoom2 said:
both are locked.
When i try to unlock bootloader,i getting the error message.
FRP lock is not possible to unlock becouse phone dont wont start.
any chance?
Click to expand...
Click to collapse
That's the problem, when playing with ROMs you must take carw that you keep OEM Unlocked.
Maybe DC-Unlocker (paid) can help
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Hi,
My phone is actually dying and I don't know how to recover it this time.
I had a perfectly working setup with latest weekly update of Xiaomi eu MIUI , TWRP and magisk, and know even fastboot is not responding.
I usually don't like when people say that, but I think a malware did it, as my apps started not responding in a few minutes, and the reboot finished the job.
Now it won't boot anymore, when it's plug the notification led is red, and fastboot is detected but commands are stuck.
Also, TWRP is neither accessible from "power + vol up" since last miui eu update, nor from fastboot since the "accident"
If someone have any advice on how to unlock fastboot, flash back the rom or any other way to recover my phone, please help
Also, if you want to know the rest of the story, it's here...
I was using my phone as usual, trying to setup a bridge openvpn connection. (like everyone :laugh: )
The issue is that the only app claiming to do that isn't free, and I want to be sure I can make it work before spending any money.
So I tried to patch it and different apks (I know it's bad...), and while transferring an apk from my laptop to my phone, I noticed the transfer was kinda slow for a few seconds (nothing worrying, but unusual)
Then some of my apps didn't want to launch and, back to the app drawer, most of my apps had their package names, with no icons...
It was at this moment Jackson I knew I screwed up...
I then tried rebooting, and the phone stayed a few minutes on the MIUI screen, then shut off.
After a reboot, I noticed the red led, the absence of boot animation, and the bootloop.
Obviously, if I had a fastboot access, it would be easy to boot on TWRP and then flash back my rom properly but I can't...
EDIT: to make this clearer (I know the post above is a little bit messy), I have the following issues:
- No access to TWRP (for flashing)
- Fastboot is accessible but broken enough so flash/boot to twrp is not possible
- I just though of EDL mode, but "fastboot oem edl" doesn't seems to work
- I prefer to avoid opening my phone (to access to the EDL test points)
EDIT2: You can't flash anything in EDL mode without specific autorisations from xiaomi, so this mode becomes way more useless than on my previous Mi A1. I managed to miraculously flash some things by using miflash in fastboot mode. Maybe working on a windows os instead of gnu/linux helped somehow...
Thelm76 said:
Hi,
My phone is actually dying and I don't know how to recover it this time.
I had a perfectly working setup with latest weekly update of Xiaomi eu MIUI , TWRP and magisk, and know even fastboot is not responding.
I usually don't like when people say that, but I think a malware did it, as my apps started not responding in a few minutes, and the reboot finished the job.
Now it won't boot anymore, when it's plug the notification led is red, and fastboot is detected but commands are stuck.
Also, TWRP is neither accessible from "power + vol up" since last miui eu update, nor from fastboot since the "accident"
If someone have any advice on how to unlock fastboot, flash back the rom or any other way to recover my phone, please help
Also, if you want to know the rest of the story, it's here...
I was using my phone as usual, trying to setup a bridge openvpn connection. (like everyone :laugh: )
The issue is that the only app claiming to do that isn't free, and I want to be sure I can make it work before spending any money.
So I tried to patch it and different apks (I know it's bad...), and while transferring an apk from my laptop to my phone, I noticed the transfer was kinda slow for a few seconds (nothing worrying, but unusual)
Then some of my apps didn't want to launch and, back to the app drawer, most of my apps had their package names, with no icons...
It was at this moment Jackson I knew I screwed up...
I then tried rebooting, and the phone stayed a few minutes on the MIUI screen, then shut off.
After a reboot, I noticed the red led, the absence of boot animation, and the bootloop.
Obviously, if I had a fastboot access, it would be easy to boot on TWRP and then flash back my rom properly but I can't...
Click to expand...
Click to collapse
Hi
I had a similar situation
I comfigured an app and during configuration the phone start framing
I rebooted and stucked at miui screen
I tried to reboot in recovery ,nothing
I downloaded latest miui for europe 12.0.3 and mi flash
For me fastboot worked to flash latest firmware from xiaomi
And now is working and my bootloader is locked
Thelm76 said:
Hi,
My phone is actually dying and I don't know how to recover it this time.
[/hide]
Click to expand...
Click to collapse
Xiaomi.eu has TWRP issue...
Go to https://www.androidfilehost.com/?w=files&flid=50678 and find your recovery (lmi) and flash it with fastboot and boot to recovery.
fastboot flash recovery twrp.img
fastboot boot twrp.img
Now download the new ROM 20.10.16, push it to the internet storage and install it dirty... Wipe Cache and reboot....
My problem is almost same, i unlock the bootloader to flash xiaomi.eu rom from global rom, unlocking and flashing custom recovery was done smoothly, when i tried to flash xiaomi.eu rom version 12.0.8 it booted back to recovery, and i format the data partition and booted to system, and same result. I tried global its same result.
Then i tried miflash tool, " antirollback error ".
Now i don't know what to do. Hope my precious poco f2 pro is not bricked, coz i can still manage to boot in custom recovery, and can use miflash tool but error.
Can someone out there help me please. Thanks in advance.
Eldybug said:
My problem is almost same, i unlock the bootloader to flash xiaomi.eu rom from global rom, unlocking and flashing custom recovery was done smoothly, when i tried to flash xiaomi.eu rom version 12.0.8 it booted back to recovery, and i format the data partition and booted to system, and same result. I tried global its same result.
Then i tried miflash tool, " antirollback error ".
Now i don't know what to do. Hope my precious poco f2 pro is not bricked, coz i can still manage to boot in custom recovery, and can use miflash tool but error.
Can someone out there help me please. Thanks in advance.
Click to expand...
Click to collapse
Since you have access to a properly working fastboot and recovery, I believe there is always a way to recover your phone.
I'll be glad to help you but for now, I'm more focused on my issue.
Only thing, while using miflash, be careful to never lock your bootloader since you would have to open your phone to access EDL mode in case of bootloop
(but you can lock it afterwards if you want)
Enricosteph said:
Xiaomi.eu has TWRP issue...
Go to https://www.androidfilehost.com/?w=files&flid=50678 and find your recovery (lmi) and flash it with fastboot and boot to recovery.
fastboot flash recovery twrp.img
fastboot boot twrp.img
Now download the new ROM 20.10.16, push it to the internet storage and install it dirty... Wipe Cache and reboot....
Click to expand...
Click to collapse
Well, the main issue here is that fastboot seems to be broken too...
i found this for you on the LOS rom for poco f2 pro (am not the autor) this is for the "Anti-rollback error" (i hope that can help you):
romabah said:
Gentlemen with EU versions of Poco F2 pro, could you help me out?
Right now i am running 12.0.2.0 QJKEUXM.
To flash Lineage i first need to flash MIUI V12.0.3.0.QJKMIXM via MiFlash. I tried to do that but got an Anti-rollback error.
Checking via fastboot i saw that my phones anti rollback value is 1, but MIUI V12.0.3.0.QJKMIXM firmware has an anti rollback of 0.
Some folks say to delete first 5-6 lines in text editor from .bat file, but at the same time people tell everywhere to NOT flash firmware with lower value that your current anti rollback.
Any advice? How did other EU folks fix this?
Edit: I fixed it! I will NOT and cannot claim that this will fix all rollback error's, but it fixed mine.
0) This is applicable to fastboot version of MIUI V12.0.3.0.QJKMIXM (aka tgz file that you need to extract twice)
1) Move the extracted firmware directory imi_global_images_V12.0.3.......ets.ets. ( map with flash_all.bat, images ) to C: directory and rename to something short, like xiaomiFirm.
This will solve a lot of weird error's as MiFlash doesnt like long directories
2) Within the moved map open flash_all.bat with text editor and delete everything starting and including "::check anti_version" to and including "echo %..."
This removes the anti rollback check somehow. The reason for only editing flash_all.bat is because this is the .bat file that is run when you choose clean all option in MiFlash, i assume you dont want to clean all and lock now do you?
3) After finishing flashing mine gave error Not catch checkpoint flash is not done, but booted normally. Gave me a heart attack.
Sanity check: When running cmd "fastboot getvar anti" it returned "anti: 1"
Meaning i just flashed a ROM with anti of 0 on a phone with a anti value of 1. At least i believe so.
In any case, thank all for giving feedback for other ways of fixing this.
Click to expand...
Click to collapse
I'll try to make a type C deep flash cable to flash fastboot, and edit this message to explain if this works
Thelm76 said:
Well, the main issue here is that fastboot seems to be broken too...
Click to expand...
Click to collapse
Try to hold down only Vol Down and connect it to your computer
Enricosteph said:
Try to hold down only Vol Down and connect it to your computer
Click to expand...
Click to collapse
I don't know if this was my cable or fastboot oem edl, but windows recognised the phone as qualcomm qdloader 9008. I'll now try to update fastboot, install twrp and check the extent of the damages.
Fangstergangsta said:
i found this for you on the LOS rom for poco f2 pro (am not the autor) this is for the "Anti-rollback error" (i hope that can help you):
Click to expand...
Click to collapse
Indeed, OP, try to flash everything from the start thep by step.
You must stop therapeutic relentlessness!!!
Just plug out the charger and let him die softly...
Put him back in his sweet box after his last breathe
Bury him in your garden with a decent burial : he deserve it!!!!
It's HIS TIME, dude....
Regards
Mastakony said:
You must stop therapeutic relentlessness!!!
Just plug out the charger and let him die softly...
Put him back in his sweet box after his last breathe
Bury him in your garden with a decent burial : he deserve it!!!!
It's HIS TIME, dude....
Regards
Click to expand...
Click to collapse
Haha it's not therapeutic relentlessness when you're sure it will live again in a few days (and fully working!)
It just need a good memory wipe and android replacement
As I managed to get to emergency mode, I can now easily replace its software
EDIT: I didn't know that for these xiaomi devices, you need very specific autorisations to flash something with EDL... Fortunately, after messing around with miflash, I managed to unlock myself out of this infinite loop
As I managed to get to emergency mode, I can now easily replace its software
Click to expand...
Click to collapse
How are you going to flash the software?
Well,
By using edl mode and miflash, I got some errors as I was not authorised to do this operation, so I rebooted to fastboot, reused miflash, and I don't know which kind of magic did that but after some files flashed and an error, I was able to boot on TWRP. With this done, I tried to keep my data but didn't worked, and as I have everything constantly backup, I dicided to do a flashall.
now, I think I have a good MIUI base to flash MIUI EU back
Thelm76 said:
Well,
By using edl mode and miflash, I got some errors as I was not authorised to do this operation, so I rebooted to fastboot, reused miflash, and I don't know which kind of magic did that but after some files flashed and an error, I was able to boot on TWRP. With this done, I tried to keep my data but didn't worked, and as I have everything constantly backup, I dicided to do a flashall.
now, I think I have a good MIUI base to flash MIUI EU back
Click to expand...
Click to collapse
I have the same situation plus no fastboot or recovery at all.. Please tell me how did you resolve it?
ghannaiem said:
I have the same situation plus no fastboot or recovery at all.. Please tell me how did you resolve it?
Click to expand...
Click to collapse
Is the phone detected by the pc in usb?
And when you press power+ sound + or - What is happening?
NOSS8 said:
Is the phone detected by the pc in usb?
And when you press power+ sound + or - What is happening?
Click to expand...
Click to collapse
Yes , detected by usb but as qcom 9008,
And when holding down power button with + or - vol it restarts again to 9008 .
So it is not detected by any means, but only detected in edl mode
ghannaiem said:
Yes , detected by usb but as qcom 9008,
And when holding down power button with + or - vol it restarts again to 9008 .
So it is not detected by any means, but only detected in edl mode
Click to expand...
Click to collapse
how did it happen?
My imei got lost so I tried to flash eng rom through MI flash to fix it. It flashes all except certain file called (aop. Mbn) so I tried to flash it by cmd commands via fastboot and then the phone bricked.. No booting to fastboot anymore , no recovery. even with disconnecting battery and reconnecting again... Phone only recognized in Edl mode and when flashing through MI flash it asks for edl authorization... Account login successful but then flash fail cuz account is not authorized. So I think The only solution will be authorized account or patched prog_ufs file
bootloader locked usb debugging off cant make command through adb sorry for bad English
cant do anything cant flash firmware tried everything
Use Rescue Mode. Enter bootloader by holding down Power + Vol Down while it was turned off, then use your volume keys to navigate to Rescue Mode. Then, go to https://pixelrepair.withgoogle.com/ and continue from there.
thanku for reply sean .. i tried rescue mode but when i choose nd to click rescue mode it atomatic comes only fastboot mode nd i cant flash or boot any img file or zip file
rubail said:
thanku for reply sean .. i tried rescue mode but when i choose nd to click rescue mode it atomatic comes only fastboot mode nd i cant flash or boot any img file or zip file
Click to expand...
Click to collapse
The point of Rescue Mode is to update the existing Android installation to a newer version. In this case of yours, your phone does not detect any valid OS, which is now pretty impossible if you want to install a fresh Android installation. Can you at least try to boot into Recovery mode?
thankss sean.. and no recovery mode opening only fastboot
only when i try to chose any other option for recovery rescue or any other it not opening only fastboot and barcode is opening this happened when i flash custom rom on both slot and flash stock rom on one slot and relocked bootloader my biggest mistake was this after all this my phone is not booting
The only last resort for you now is to contact Google Support, or go to a nearby Google Store for assistance. Since you custom'ed' ROM it, your warranty is now voided. If you still want to try fix it yourself, ask ChatGPT or Google for help :-(
ok iam going to give it to a shop or ill return my phone it has 1 years of waranty
rubail said:
ok iam going to give it to a shop or ill return my phone it has 1 years of waranty
Click to expand...
Click to collapse
if you can get into fastboot mode, I might try PixelRepair tool from Google, but there's a chance it'll format/wipe data...so be aware of that...
nevermind...didn't read fully...overlooked that you relocked bootloader...this is a time old tale of hard bricking device when relocking bootloader -- for next time (and for anyone considering it), the best way to do it is to use Google's official Android Flash Tool as it is from Google so you know it follows proper protocol to not hardbrick your device when relocking bootloader...
i can access fastboot mode but nothing help because of bootloader locked nd debugging is also disabled :'(
rubail said:
i can access fastboot mode but nothing help because of bootloader locked nd debugging is also disabled :'(
Click to expand...
Click to collapse
Your last chance is sideloading an OTA -- you don't need usb debugging or unlocked bootloader to do that. But it's a stretch as you locked the bootloader without flashing factory images on both slots which usually results in hard-bricks.