Database Info

Need help asap pixel bricked

Hi, I really need your assistance for my pixel. I locked my bootloader after unrooting my phone. This process totally bricked my phone(I can't even get to the booting process of the phone) (I get a message saying that my phone is corrupt). I am able to gain access to my fastboot. So I was wondering if there was a way for me to flash the factory image to my phone and get it to work again. Please of there is anything you can do, please help me.

Its_joey_k23 said:
Hi, I really need your assistance for my pixel. I locked my bootloader after unrooting my phone. This process totally bricked my phone(I can't even get to the booting process of the phone) (I get a message saying that my phone is corrupt). I am able to gain access to my fastboot. So I was wondering if there was a way for me to flash the factory image to my phone and get it to work again. Please of there is anything you can do, please help me.
Click to expand...
Click to collapse
I'm really afraid there's nothing you can do. Before relocking the bootloader, you must go back to an approved stock firmware. (See, when you rooted it, you changed it.)

quangtran1 said:
I'm really afraid there's nothing you can do. Before relocking the bootloader, you must go back to an approved stock firmware. (See, when you rooted it, you changed it.)
Click to expand...
Click to collapse
I unrooted my device, so then after I can lock my bootloader. I'm just wondering if that's how I was supposed to do it.

If you have downloaded the full image from Google servers, try if you can fastboot using the boot image from the full image. It that boots your phone, you could try enabling unlock, get into fastboot to unlock for flashing. You can then flash the full image from unlocked fastboot

hackworks said:
If you have downloaded the full image from Google servers, try if you can fastboot using the boot image from the full image. It that boots your phone, you could try enabling unlock, get into fastboot to unlock for flashing. You can then flash the full image from unlocked fastboot
Click to expand...
Click to collapse
Is there any way you could lead my step by step. I don't want to screw up my phone even more. + I'm new to the community and don't know much.

You can use the fastboot continue command.
This will boot up your phone normally and then you will be able to go to developer settings and enable oem unlocking again.
After this you will be able to unlock from fastboot again.
http://forum.xda-developers.com/pixel/help/accomplished-hardbricked-pixel-d-t3516717

Its_joey_k23 said:
Is there any way you could lead my step by step. I don't want to screw up my phone even more. + I'm new to the community and don't know much.
Click to expand...
Click to collapse
If you can put your phone in fastboot mode, you're not bricked yet.

hackworks said:
If you have downloaded the full image from Google servers, try if you can fastboot using the boot image from the full image. It that boots your phone, you could try enabling unlock, get into fastboot to unlock for flashing. You can then flash the full image from unlocked fastboot
Click to expand...
Click to collapse
You saved my life! Thank you.

SOLVED....Can´t get to TWRP because of my fault

SOLVED!......
So hello guys, I am 17 year old, amateur in this mobile topic . My mobile is honor 8 with android 7.0
I unlocked my boot loader and then I tried to flash the TWRP thorugh the fastboot. It didn´t work. Everytime when the mobile was starting I finished on the screen that told me :"your device is unlocked...., your device is starting..." just the normal window when you have bootloader unlocked. I couln´t get into anything. I tried multiple twrps and then I found one called like twrp-3.1.1-1-frd.img https://forum.xda-developers.com/honor-8/development/twrp-t3566563 that worked for me and everything was ok.
But yesterday I wanted to unroot the phone. I read here how to do that: https://forum.xda-developers.com/honor-8/help/honor-8-to-stock-locked-t3509004
But everytime I wanted to start through stock recovery.img (that was downloaded in update.app from https://forum.xda-developers.com/honor-8/development/models-stock-firmware-packages-honor-8-t3501942) nothing happen.
Still the window with the message your device is starting. I coun´t get elwhere then bootloader mode. When I flashed the twrp-3.1.1-1-frd again, it worked normal. But I still wanted to get stock.
I didn´t know what to do so I scrolled down the same site and found this:
"Extract the update.app use this attachment
take Boot , Recovery , Data , System .
Go to ur Fast-boot Folder move this Files inside it .
Open Terminal or CMD throw Admin Rights inside the folder
make sure ur device with fast-boot mode before connecting ur cable to ur device
and make sure u have drivers installed
Type in CMD
Fastboot flash Boot boot.img
Fastboot flash Recovery Recovery.img
Etc .. flash all .imgs
Last type fastboot oem lock <YourPersonalUnlockCodeHere> ( THIS ONLY IF U LIKE TO LOCK AGAIN !)
fastboot Reboot . unplug cable and hope Work Fine ."
So I did what is written there I extracted those img files from update.app and flashed them ...... Now even if I put twrp-3.1.1-1-frd.img nothing happen I am stuck there only thing I can do is to boot to bootloader mode or be in the windew that is telling me device is starting....
And what would I want is to unstuck and go stock again.
Thank you in advance for your reply and sorry for the english.
How did I solve. I flashed twrp in recovery2 too, this solved it and mobile booted. THX for help guys.

https://forum.xda-developers.com/honor-8/how-to/discussion-t3591964/post72056001and#post72056001

deadko said:
https://forum.xda-developers.com/honor-8/how-to/discussion-t3591964/post72056001and#post72056001
Click to expand...
Click to collapse
I dont understand what you meant. the twrp-3.1.1-1frd.img doesn´t work for me at the moment it worked but since I did what I wrote it stopped working.
I cant get even in recovery mod.

Rommco05 said:
I always prefer clean start. Is a longest way but for performace and battery is the best!! So u can make downgrade to Marshmalow and your bootloader will locked (relocked) auto. If don't know how (xda search) leave a post here
Click to expand...
Click to collapse
But I don´t know how and where to start the only 2 screens I get is bootloader boot and your device is starting...
and I dont know why all of the TWRPs stoped working for me

Rommco05 said:
If u can boot to os. Please check in fastboot and in developer section >> frp is locked or unlocked? oem is...?
Click to expand...
Click to collapse
I can´t boot at all not even in recovery mode. "Phone onlocked, FRP unlock"

Rommco05 said:
Your last fw was?
edit: unroot phone? I see first time thx
Click to expand...
Click to collapse
When I rooted I installed how I wrote twrp, then flashed super su
I dont have unrooted phone I just wanted to unroot the way that I would install update.app throught stock recovery mode.

Markus37CZ said:
When I rooted I installed how I wrote twrp, then flashed super su
I dont have unrooted phone I just wanted to unroot the way that I would install update.app throught stock recovery mode.
Click to expand...
Click to collapse
U can install even with root . It will bring back all the files to stock .dont worry about current system. It will be updated with the file in update.app and all ur changes to system will be erased

i bricked my honor, is there anything i can do?

So I had an unlocked H8 with LOS. As I wanted to install EMUI, I put the proper restore Update.app into the dload folder and started Huawei's recovery. Everything went well, I formated data and wanted to install the EMUI 4.1 ROM using the same method.
Unfortunately my H8 is bootlooping and there is now way into erecovery nor any other recovery. It simply reboots on every single known vol up or down key pressing combination. The only thing I can go to is fastboot mode when holding down vol down and plugging in usb wire. But, it says frd locked and I can't install nor boot twrp. It's simply gone and reboots all the time.
Any hints? I can't even turn it off.

I wanted to give away that phone that's the reason. Last time I did it this way, I could flash the EMUI 4.1 since it's signed. But not this time.
Interesting part is, that although fastboot says frd locked, I still get the "phone unlocked" warning on every reboot. dload method isn't working, as it simply keeps rebooting.
It's my hardest brick so far I ever encountered

the same thing happened to me.....on my phone lock/unlocked frp and bootloader were tweaked for some reason(I mean that what was written wasn't the reality) so how did I fix it? I kept on to flash rollback package many times and I tried to unlock/relock bootloader again, at the end the phone let me to flash the firmware, I didn't know how but the phone allowed me to flash things throw recovery(using dload method). At the begin I only could access to erecovery and fastboot. I suppose that I broke system and data partition and while I looked/unlocked the bootloader, the wipe fixed the partition table. Sorry I'm tired and I know that my English sucks, I hope you understand what I have written.

How did you enter erecovery as this isn't working for me.... What did you flash over fastboot?

Have you tried flashing the firmware separately using adb on computer?
For this you just need to extract the Update.app using the firmware extractor for huawei. Then flash them individually using adb commands in cmd.

I can't access any state that would allow to do adb.

faeArai said:
How did you enter erecovery as this isn't working for me.... What did you flash over fastboot?
Click to expand...
Click to collapse
sorry. I'll try to explain better, however on Huawei/honor devices there are not one but two recoveries, so one is the normal recovery flashed in recovery partition, the second one is the Huawei recovery that is flashed in recovery2 partition, so if you didn't touch recovery2 partition, your erecovery is still there, now, if you press VOL+ VOL- and POWER it will reboot to recovery2 and it starts to flash something from dload in your sd card, so in my opinion you should do this things, first try this method to flash rollback package(this is the transition package from 7 to 6 and you will find it on honor site) if this is still not working try locking and unlocking again your bootloader(I hope this fix partitions of your device) then try to enter recovery and do a wipe and then boot your device, if this doesn't work flash rollback package(now it would work) and then flash an emui 4 full firmware image, always using dload method. trust me... I did the same... and it worked for me. let me know if it works for you :good:

faeArai said:
So I had an unlocked H8 with LOS. As I wanted to install EMUI, I put the proper restore Update.app into the dload folder and started Huawei's recovery. Everything went well, I formated data and wanted to install the EMUI 4.1 ROM using the same method.
Unfortunately my H8 is bootlooping and there is now way into erecovery nor any other recovery. It simply reboots on every single known vol up or down key pressing combination. The only thing I can go to is fastboot mode when holding down vol down and plugging in usb wire. But, it says frd locked and I can't install nor boot twrp. It's simply gone and reboots all the time.
Any hints? I can't even turn it off.
Click to expand...
Click to collapse
I ran into this issue not that long ago. What you have to do is relock your bootloader using ADB. The ADB commands and instructions can be found in this thread.
Just a FYI, do not use the links to the software listed in that thread as it is a little outdated. The method still works but the software will probably not work. Just be sure to get the most recent/appropriate version of SuperSU and TWRP via their official threads (This is if you want to re-root). There are Honor 8 specific TWRP files if I remember correctly, so be sure to check around the Honor 8 forums for the correct files.
A quick summary of what I did:
1) Power your phone off and then boot into fastboot by holding Vol down + Power; as soon as it boots up, plug your phone into your combuter via your usb cord.
2) With ADB running, type:
Code:
fastboot oem relock [COLOR="LightBlue"]################[/COLOR]
NOTE: The '#' should be replaced with your unique unlock code that you obtained to unlock your bootloader.
3) Wait for it to format and reset your phone and go through the setup. BE SURE TO BYPASS all google registration; skip everything you can to get into the phone itself. If you do register, it will reactivate FRP and you'll have to start over again.
4) Turn on USB Debugging and every other setting that enables developer administrative navigation and control just to be safe. USB Debugging being the most important one, though.
5) Restart your phone and boot into fastboot again using Vol down + Power.
6) Unlock your phone again with:
Code:
fastboot oem unlock [COLOR="LightBlue"]################[/COLOR]
7) Once the command is entered, it'll reset your phone once more and - as stated before - bypass/skip all google (FRP) registration.
8) Enable developer options and USB debugging again and make sure that OEM Unlocked is checked and grayed out.
9) Reboot into fastboot mode to confirm that FRP is disabled and you should be able to install TWRP now via ADB.

@Numerics thanks. The thing is, that I can't boot anything. I can't even go into eRecovery. Nor can I flash a stock EMUI 4.1. It just boot loops all the time and I can only access fastboot.

If you can flash twrp..........Install los or other Rom ..................Go back to stock.......you must flash b360 ober adb...... because los is 7.1...............if you on b360 you can usw the rollback for emui 4.1........,..............sry for bad english

I can easily go to fastboot. But I can't flash anything. I extracted the img from the update.app but can't flash. It simply says that it's not permitted.

faeArai said:
I can easily go to fastboot. But I can't flash anything. I extracted the img from the update.app but can't flash. It simply says that it's not permitted.
Click to expand...
Click to collapse
With my method, you don't need to flash anything. Just relock your bootloader via adb in fastboot mode and let it reset. Unless I'm not understanding your issue entirely.

@Numerics as I said, in won't boot anything as it is constantly boot looping. There is no way to access any kind of recovery nor erecovery. There is no boot into Android. The only thing accessible right now is fast boot (which is not ADB). But even in fast boot I can't do anything als operations are not permitted.
after boot looping and starting fast boot mode, I can see a "Android reboot reason" section saying:
AP_S_PANIC
data is invalid
There is still a lineageos installed on system as firmware but as I tried to get rid of it by going back to stock EMUI, I guess Huawei's rollback did something wrong and killed recovery (although I did it in the past successfully).
I tried to run HiSuite to recover my phone, but it just says, that my phone is not supported.
Speaking of this, Huawei messed up with that whole fastboot locking bull****.

faeArai said:
@Numerics as I said, in won't boot anything as it is constantly boot looping. There is no way to access any kind of recovery nor erecovery. There is no boot into Android. The only thing accessible right now is fast boot (which is not ADB). But even in fast boot I can't do anything als operations are not permitted.
after boot looping and starting fast boot mode, I can see a "Android reboot reason" section saying:
AP_S_PANIC
data is invalid
There is still a lineageos installed on system as firmware but as I tried to get rid of it by going back to stock EMUI, I guess Huawei's rollback did something wrong and killed recovery (although I did it in the past successfully).
I tried to run HiSuite to recover my phone, but it just says, that my phone is not supported.
Speaking of this, Huawei messed up with that whole fastboot locking bull****.
Click to expand...
Click to collapse
No, I know ADB isn't Fastboot. What I'm trying to say is that you should be able to still run ADB via CMD on Windows when you're in fastboot mode to relock your bootloader with the directions I gave in my previous post. It'll force-restore your phone to a non-bricked/vanilla state. At least that is how I fixed mine.
Like... You can't even try using the 'fastboot oem relock ################' function via the ADB console while in fastboot?

yes boy trust us, you haven't a working OS so it is a normal thing that your phone reboot, you cannot access to recovery because some partitions are corrupted (data partition) , so these are the steps that could help you:
1) using fastboot, relock your boot loader
2)using fastboot, unlock your boot loader (partition table would be ok now, and you would be able to use load method to flash things trow stock recovery)
4)put inside your sd card \dload\update.app(use rollback package)
3) press all the buttons while your device is rebooting(do this before the blue screen logo appear), your phone is now looking for something inside your sd card
5) if the next step doesn't work do a factory reset from recovery that now would be working
6) put inside your sd card a full android 6 (emus 4) update.app and pressing all buttons it will install the firmware
7) your device now is locked and back to stock, maybe without cust partition or maybe in test mode but it is certainly alive
8) do a factory reset and reinstall the firmware
9) your phone is now ok

You don't lock the bootloader via ADB but via fastboot.
As I said, northing was restored and nothing is booting and I can't unlock my bootloader again. As I said, recovery is not working so the file in dload is not loaded and used. Which is strange.
Locking bootloader didn't do anything besides locking the bootloader. Device is still dead and I still can only access fastboot.

faeArai said:
You don't lock the bootloader via ADB but via fastboot.
As I said, northing was restored and nothing is booting and I can't unlock my bootloader again. As I said, recovery is not working so the file in dload is not loaded and used. Which is strange.
Locking bootloader didn't do anything besides locking the bootloader. Device is still dead and I still can only access fastboot.
Click to expand...
Click to collapse
Which model do u own?
Sent from my Honor 8 using XDA Labs

The European one.

faeArai said:
You don't lock the bootloader via ADB but via fastboot.
As I said, northing was restored and nothing is booting and I can't unlock my bootloader again. As I said, recovery is not working so the file in dload is not loaded and used. Which is strange.
Locking bootloader didn't do anything besides locking the bootloader. Device is still dead and I still can only access fastboot.
Click to expand...
Click to collapse
This is not the truth.....locking bootloader will erase all your data and fix partitions....and with fixed partition you can access to recovery ......trust me the only thing that you can do is to lock your bootloader......you can't flash anything from fastboot and boot recovery or system now...... lock your bootloader and then unlock it again, try using "fastboot OEM lock *****" or "fastboot OEM relock *******" (try cmd runned as admin, people say that this makes the difference) then unlock your device again and .....magic your recovery will boot......the same thing happened to me and I fixed my phone using this trick, however, even if you had frp unlocked it would say you that isn't possible to write anything because you broke some partition, and that's the reason why you can't boot recovery, wait one second and think: why doesn't my recovery boot?

It has nothing to do with trust. I did it and device is still a full stone brick. Nothing changed by locking the bootloader besides that now I can't unlock the bootloader anymore.

Help please. Im desperated

Hello
I bought a Huawei x2 and brought a Chinese rom that gave me many problems.
I tried to ask him for updates using the "dload" method but he gave me an error.
The fact is that I formatted it from Flashtool thinking that I had the bootloader open.
After trying everything, he discovered that the bootloader is closed, but now the phone does not boot because I think I have flashed the entire system.
Flash a recovery, it makes me ok but then it does not pass Huawei's logo.
I guess without opening the bootloader it will be impossible to fix it.
I can access the Fastboot mode but I do not know what to do.
I also tried to flash img from the Huawei Extractor, which had previously worked on another X2 that I had brickered.
I guess without the open bootloader it's impossible to do anything.
I need your help. Thank you

Checked in fastboot, bootloader is unlocked.
But I cant install Twrp

I erase system, boot, user data etc
And now I dont have fastboot mode
Running error
boot image security verify failed
Help, please

lobodemonte said:
I erase system, boot, user data etc
And now I dont have fastboot mode
Running error
boot image security verify failed
Help, please
Click to expand...
Click to collapse
Flash this boot.img in fastboot which should still work. This boot.img is from B212 but should work on any B2xx rom. I'm not sure how else to help you when I don't know much about your device.
https://drive.google.com/file/d/1Ss3nkPJhQrlfHRgQzBRqXxTw6N7Pmz91/view?usp=sharing

Thanks ,but now I dont have access to fastboot mode

You have to use a usb cable and connect your phone to your PC first.
Then press volume down first + power to boot into Fastboot.

I know how use fastboot but now phone cant enter in fastboot..

Boot from B212 dont work

lobodemonte said:
Boot from B212 dont work
Click to expand...
Click to collapse
I don't know how else to help you. If you want to ship me your device Ill get it working for you and ship it back. You should always be able to get into the bootloader to run fastboot commands.

Now I can enter in fastboot.
I tried ALL but dont works.

Question How do I flash stock ROM with locked bootloader?

Hi guys,
so after I got my xiaomi with a global ROM and wanted to update and that is when I accidentally relocked the bootloader. The version of ROM was invalid apparently and wouldn't let me boot and now I'm stuck in fastboot mode.
My problem is as follows:
-can't enter recovery, stuck at fastboot no matter how many times I try and reboot
-adb not working since I didn't enable it
-bootloader locked (miflash says so and it can't unlock it since I didn't check 'oem unlock enable' and I cannot boot ROM so I can't enable it)
-fastboot flashing says 'not allowed in lock state'
-edl mode not available
I've seen tutorials where people opened their phones to force the phone into edl mode via the testing points but is that the only way`?
Any suggestions on how I could unbrick it?
Much appreciated

yes, it is the only way.

koniv90 said:
Hi guys,
Any suggestions on how I could unbrick it?
Much appreciated
Click to expand...
Click to collapse
you can use this tool to flash the phone on fastboot mode
Xiaomi King Tool - Home.
xiaomikingtool.com
its cost you only 5 credit

Can you flash files by fastboot? if so, flash the global rom images one by one, then reboot

I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.

eclipsek20 said:
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
Click to expand...
Click to collapse
I need help please my phone redmi k50 gaming is no recovery and . bootloader is locked

eclipsek20 said:
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
Click to expand...
Click to collapse
Please I have pocophone f1 which says system has been destroyed I have downloaded the firmware xiaomi_poco_f1_V12.0.2.0.QEJRUXM_20200907.0000.00_Gobal_10_XFT (by xiaomistockrom.com) and Qualcom Driver V1.0 and MiFlash tool 20210226 and ADB drive R13 and MiFlash unlock tool en-3.5.1128.45 and platform tool r33.0.3-windows after installing all this drives the phone doesn't want to flash when I use MIFLASH TOOL to flash it say ERROR FLASH IS NOT ALLOWED IN LOCK STATE MODE. when I use windows powershell it says the same thing it looks like the bootloader is lock and I don't know the xiaomi e-mail, number and password on the phone pls help me

This what I'm facing

Dims_Camper said:
yes, it is the only way.
Click to expand...
Click to collapse
So even with a locked bootloader and disabled developer options, I can still flash stock rom in edl mode, regardless?

kskksks said:
So even with a locked bootloader and disabled developer options, I can still flash stock rom in edl mode, regardless?
Click to expand...
Click to collapse
Nope, only very old devices.

NOSS8 said:
Nope, only very old devices.
Click to expand...
Click to collapse
So that's why I get the error "operation not allowed for write" in QFIL... What do i do then? Is there a way to unlock bootloader in edl mode? I can't access recovery mode because of the bootloop... Only EDL mode

kskksks said:
So that's why I get the error "operation not allowed for write" in QFIL... What do i do then? Is there a way to unlock bootloader in edl mode? I can't access recovery mode because of the bootloop... Only EDL mode
Click to expand...
Click to collapse
Have you tried to flash stock rom?
I mean, if you have Chinese rom before, just flash with latest Chinese rom.

Ghanaba said:
Please I have pocophone f1 which says system has been destroyed I have downloaded the firmware xiaomi_poco_f1_V12.0.2.0.QEJRUXM_20200907.0000.00_Gobal_10_XFT (by xiaomistockrom.com) and Qualcom Driver V1.0 and MiFlash tool 20210226 and ADB drive R13 and MiFlash unlock tool en-3.5.1128.45 and platform tool r33.0.3-windows after installing all this drives the phone doesn't want to flash when I use MIFLASH TOOL to flash it say ERROR FLASH IS NOT ALLOWED IN LOCK STATE MODE. when I use windows powershell it says the same thing it looks like the bootloader is lock and I don't know the xiaomi e-mail, number and password on the phone pls help me
Click to expand...
Click to collapse
Try to flash the .img files of the fastboot rom, unzip the rom and find all the .img files and flash them with CMD from fastboot, one by one

jholfran3 said:
Try to flash the .img files of the fastboot rom, unzip the rom and find all the .img files and flash them with CMD from fastboot, one by one
Click to expand...
Click to collapse
Hello, My Poco X3 System destroyed itself while I was using it, it showed a glitch screen and turned off. Now I went to flash my mobile through Miflash but it showed the bootloader is locked and now I can't unlock it as the system itself is destroyed and can't do anything. So i wanted to know if i can flash my mobile with cmd as you said above flashing img files one by one or let me know if there is any method to flash my mobile or unlock the bootloader? Please me help bro

flashing is possible with modified firehose programmer (no auth factory loader) or with authorized xiaomi account. both solutions are paid service and cannot advertised here.
please -as always- read the thread you posted in. I can see useful information shared already. wait for other replies.

letsgofly said:
Hello, My Poco X3 System destroyed itself while I was using it, it showed a glitch screen and turned off. Now I went to flash my mobile through Miflash but it showed the bootloader is locked and now I can't unlock it as the system itself is destroyed and can't do anything. So i wanted to know if i can flash my mobile with cmd as you said above flashing img files one by one or let me know if there is any method to flash my mobile or unlock the bootloader? Please me help bro
Click to expand...
Click to collapse
Hi, try to flash the .img files from the fastboot stock rom whit cdm in fastboot, one by one, some files will give error but skip that, then reboot the phone as normal, it should work.
example:
fastboot flash boot boot.img
fastboot flash cust cust.img
etc.

jholfran3 said:
Hi, try to flash the .img files from the fastboot stock rom, one by one, some files will give error but skip that, then reboot the phone as normal, it should work.
Click to expand...
Click to collapse
If it were that simple, it would have been known for a long time.
You have already posted about this (post#14).

NOSS8 said:
If it were that simple, it would have been known for a long time.
You have already posted about this (post#14).
Click to expand...
Click to collapse
I had a Mi 9T and by mistake I installed a recovery that didn't correspond to it, the phone got bricked, and the only way to save it was like this, I searched and read everywhere but I couldn't find a solution, flashing the .img files was my idea, I didn't know if it would work but it did.
:V

jholfran3 said:
I had a Mi 9T and by mistake I installed a recovery that didn't correspond to it, the phone got bricked, and the only way to save it was like this, I searched and read everywhere but I couldn't find a solution, flashing the .img files was my idea, I didn't know if it would work but it did.
:V
Click to expand...
Click to collapse
To install a recovery, the bootloader must be unlocked.