Vehicle settings - MTCD Android Head Units Q&A

My MTCD unit forgot the vehicle settings after I update with PX5 core board. Please help.
Sent from my SM-G950F using Tapatalk

Related

Erisin 4046 mtcd?

I have a erisin 4046 is this a mtcd? http://www.ebay.de/itm/231920792513
Sent from my HTC One M8s using XDA-Developers mobile app
If it has android 5.1 then most likely. Also if you look at the page you linked, scroll down 2/3 of the page, and see the picture w/ the barcode, and you'll see it was MTCD in to details - which doesn't always mean much, since pictures aren't always accurate... but I'd guess that it is a MTCD.
Thank you
Sent from my HTC One M8s using XDA-Developers mobile app

Infa red remote for MTCD HU

Does anyone know if a infa red will work with these units without dvd
Sent from my A0001 using Tapatalk
Damit17 said:
Does anyone know if a infa red will work with these units without dvd
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I don't think so....I've not seen a IR receiver in the front of the unit....
solmer said:
I don't think so....I've not seen a IR receiver in the front of the unit....
Click to expand...
Click to collapse
I just bought a new unit it does have a ir receiver in front next to disk drive. It came with no remote. I'm also curious to the question and if a universal remote would work? Even better if a wireless keyboard ....
A wireless keyboard needs drivers.....Try auniversal remote software for android (you need a phone with it, is:Xiaomi mi4)
I contacted joying knowing that they won't sell the parts but I figured I'd try hopefully they get back to me tomorrow. Any chance you could take apart your HU and post a picture of ir and where it is soldered in
Sent from my A0001 using Tapatalk

KD HU and Kia Cee'd: which canbus

I have a KD head unit with malaysk rom: steering Wheel commands work fine but I don't know which protocol i'd use for my canbus: raise, simple, hiworld?
Can someone help me?
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
Well if your steering wheel commands work you probably have the right setting for Canbus.
To be sure you can take out your HU and visually check the canbus decoder (it's a square plastic box). On mine there's a label that tells Raise and the car model and make it's meant for(I think it's the canbus decoder manufacturer).
gunmoule said:
Well if your steering wheel commands work you probably have the right setting for Canbus.
To be sure you can take out your HU and visually check the canbus decoder (it's a square plastic box). On mine there's a label that tells Raise and the car model and make it's meant for(I think it's the canbus decoder manufacturer).
Click to expand...
Click to collapse
Thanks... Tomorrow i'm going to take out my HU...
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
gunmoule said:
Well if your steering wheel commands work you probably have the right setting for Canbus.
To be sure you can take out your HU and visually check the canbus decoder (it's a square plastic box). On mine there's a label that tells Raise and the car model and make it's meant for(I think it's the canbus decoder manufacturer).
Click to expand...
Click to collapse
Probably I make a mistake: I haven't got an aftermarket canbus decoder. I installed my HU simply plugging the cables (without a canbus decoder), I setted steering wheel commands using the factory settings of HU.
Should I buy a canbus decoder?
colostro said:
Probably I make a mistake: I haven't got an aftermarket canbus decoder. I installed my HU simply plugging the cables (without a canbus decoder), I setted steering wheel commands using the factory settings of HU.
Should I buy a canbus decoder?
Click to expand...
Click to collapse
My question is why? Everything works you said? So there is no need to right don't try to fix something that isn't broken
Verstuurd vanaf mijn A0001 met Tapatalk
moneyvirus said:
My question is why? Everything works you said? So there is no need to right don't try to fix something that isn't broken
Verstuurd vanaf mijn A0001 met Tapatalk
Click to expand...
Click to collapse
You are right. I wonder why I can't see any pic when I open a door or use A/C... But really is useless[emoji28]
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
colostro said:
You are right. I wonder why I can't see any pic when I open a door or use A/C... But really is useless[emoji28]
Inviato dal mio Redmi Note 3 utilizzando Tapatalk
Click to expand...
Click to collapse
Lol you didnt tell us that was a problem m8 you just said steering wheel buttons are working fine you didn't say all the other things...
Verstuurd vanaf mijn A0001 met Tapatalk
moneyvirus said:
Lol you didnt tell us that was a problem m8 you just said steering wheel buttons are working fine you didn't say all the other things...
Verstuurd vanaf mijn A0001 met Tapatalk
Click to expand...
Click to collapse
LOL
And so? Any idea?
My HU is a custom fit for my car, so I didn't buy any decoder ( i have got no amplifier)
colostro said:
LOL
And so? Any idea?
My HU is a custom fit for my car, so I didn't buy any decoder ( i have got no amplifier)
Click to expand...
Click to collapse
Hi! Have you found any solution for this?

Remote control with second device

I would like to be able to control my head unit from another android tablet in the vehicle. Has anyone done this? Do you have any recommendations?
Thanks
Sent from my iPad using Tapatalk

Are any MCU's compatible with HT

My MCU is a MCTE_HT_V3.53_1 Are there any other mcu's (HA, KDL etc.) That are compatible with it?
My reply doesn't bring much to the table so I apologize for that but I have the exact same MCU and I've been searching for a few months now and have not found any conclusive proof then you can switch. Although it does sound like a lot of the MCUs are Universal. Not only have I not found any info on compatible with HT but there is also very little talk Of the newer firmware like me and you have everything I've seen is based off of much older MCUs. Just out of curiosity what reason do you have for wanting to switch your MCU
Sent from my SM-N986U1 using Tapatalk
juvenile43 said:
My reply doesn't bring much to the table so I apologize for that but I have the exact same MCU and I've been searching for a few months now and have not found any conclusive proof then you can switch. Although it does sound like a lot of the MCUs are Universal. Not only have I not found any info on compatible with HT but there is also very little talk Of the newer firmware like me and you have everything I've seen is based off of much older MCUs. Just out of curiosity what reason do you have for wanting to switch your MCU
Sent from my SM-N986U1 using Tapatalk
Click to expand...
Click to collapse
Not really wanting to switch right now. Just looking to the future. So far almost everything on my HU is working almost exactly how I want. Just keeping an open mind.
Sent from my SM-N986U using Tapatalk
Do you have a vanku or a pumpkin? Mine is a vanku
Sent from my SM-N986U1 using Tapatalk
juvenile43 said:
do you have a vanku or a pumpkin? Mine is a vanku
sent from my sm-n986u1 using tapatalk
Click to expand...
Click to collapse
vanku px6 4/64
Same here off Amazon. Been a great unit. Downgraded to android 9 to use hal9k rom but gonna switch to Malaysk rom this week now that he put out an android 10 variant
Sent from my SM-N986U1 using Tapatalk
Actually I was looking at the different ROM's. I used to use Malaysk's ROM's all the time on my older units but will probably try out the HAL9k once it is android 10. I was able to root the stock ROM. Problem is, I have everything working damn near perfectly as it is. The only thing I have even the slightest issue with is my TPMS software after resuming from standby...but I've fixed it using the startup from the AGAMA launcher.
AGAMA
PowerAmp
NavRadio+
MCTDialer
Between these packages everything is slick. Sound quality is great on calls. Agama gives me the google button on the main screen which plays any song on my SD card by voice command, I can dial any number in my phone book by voice command with MCTDialer and the Navradio+ is a stellar interface for the radio tuner.
I have had several HU's over the years and this one is head and shoulder the best I have ever had.
yeah i get it mine was rooted stock 10 and really ran nice also. never got mctdialer working though. it came baked into hal9k too.
comptechltd said:
My MCU is a MCTE_HT_V3.53_1 Are there any other mcu's (HA, KDL etc.) That are compatible with it?
Click to expand...
Click to collapse
Do you have a copy of the MCTE_HT_V3.53_1 mcu ?
Sent from my SM-G965U using Tapatalk
MCTE_HT_V3.30_1View attachment 5124849
Sent from my SM-G965U using Tapatalk
sean19661 said:
Do you have a copy of the MCTE_HT_V3.53_1 mcu ?
Sent from my SM-G965U using Tapatalk
Click to expand...
Click to collapse
How do I extract it? I mean pull it from the HU. The seller wasn't really up to sending me it in zipped form.
I flashed a different one and am now getting an error, anyone have the original as listed above? I also have a vanku.
Thanks in advance guys

Categories

Resources