Hi,
My Letv le 1s x507, showing red light (not powering ON). I try to install stock rom EUI 14s usin TWRP 2.8.6. While installing rom it shows that rom succeed and after reboot phone won't POWER ON. It still showing red light, as i have unplug battery and plug it again. Please help me out, i am very upset:crying:. Plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz.
e-mail: [email protected]
Red light solved
dexiner said:
Hi,
My Letv le 1s x507, showing red light (not powering ON). I try to install stock rom EUI 14s usin TWRP 2.8.6. While installing rom it shows that rom succeed and after reboot phone won't POWER ON. It still showing red light, as i have unplug battery and plug it again. Please help me out, i am very upset:crying:. Plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz.
e-mail: [email protected]
Click to expand...
Click to collapse
Hi guys,
Last time i got red light issue with my Letv le 1s x507. So it is because i try to downgrade it to base version after that phone bootloader flashed. So here is the solution, stop watching youtube videos,don't try to open your phone (means don't open screen OR touch to de-attach the battery). Because it may cause of screen damage. Just download latest SP FLASH TOOL and download EUI base version which is 5.5.008S and follow the SP FLASH TOOL GUIDE STEP to flash that base version. Keep Format+Download while using SP FLASH tool. let process to be complete and your phone will be live again.
Letv 1s RED Light issue
dexiner said:
Hi guys,
Last time i got red light issue with my Letv le 1s x507. So it is because i try to downgrade it to base version after that phone bootloader flashed. So here is the solution, stop watching youtube videos,don't try to open your phone (means don't open screen OR touch to de-attach the battery). Because it may cause of screen damage. Just download latest SP FLASH TOOL and download EUI base version which is 5.5.008S and follow the SP FLASH TOOL GUIDE STEP to flash that base version. Keep Format+Download while using SP FLASH tool. let process to be complete and your phone will be live again.
Click to expand...
Click to collapse
I did above mentioned procedure and EUI base version which is 5.5.008S flashed successfully but then also keep on looping in battery and startup logo. Still red light issue is reproducing.
hr1x said:
I did above mentioned procedure and EUI base version which is 5.5.008S flashed successfully but then also keep on looping in battery and startup logo. Still red light issue is reproducing.
Click to expand...
Click to collapse
Try flashing eui 5.5.014s with sp flash tool...
Related
Hello Guys,
I have a Letv le 1s x509 which is not booting up after flashing MIUI 7 through TWRP. I had flashed twrp and rooted the
phone for my friend then He flashed the MIUI 7 through TWRP but it did not work. TWRP was working fine but now I can't
access anything in the phone and whenever I plug it to pc only the red led glow up and Also no key combinations are
working.
I had also tried to flash it through sp flash tool but It showed me "S_BROM_CMD_STARTCMD_FAIL (2005)".
Please provide a solution.
P.s. - Phone is rooted and has its bootloader unlocked.
Hi,
Try posting your question here:
http://forum.xda-developers.com/leeco-le-1s/help
The experts there may be able to help.
Good luck!
My letv 1s mobile only start recovery mode...I am flashed new rom but same problem....????
When I normal start aur reboot phone they start on recovery..??
I am flashed Rom but same problem...??
plzzz help me..!
which rom u flashed? if u flashed stock rom then there is nothing to cause this problem, if your on stock recovery flash latest twrp by fastboot or if ur on twrp flash latest recovery, then connect via mtp to pc, copy latest rom zip to intenal storage n flash it, refer my latest installation guide
I am also facing same problem
NileshVermaNet said:
My letv 1s mobile only start recovery mode...I am flashed new rom but same problem....????
When I normal start aur reboot phone they start on recovery..??
I am flashed Rom but same problem...??
plzzz help me..!
Click to expand...
Click to collapse
I am also facing same problem
i am also facing same issue. some one Please help....
i am also facing same issue. some one Please help....
Although I no longer own this device I think you flashed it over older rom say 17s .If that is the case Then I suggest You flash your official rom update it to the latest 19 s rom and then again unlock bootloader ,and flash Twrp ...Hope it helps. Hit that thanks button if I helped.
pls help my lenovo s860 can't finish flash using sp flash tool
the reason my phone lenovo s860 got bricked is because I've installed too many xposed module, I rebooted it right after the installation and then it went boot loop
So I tried to format it using Recovery Rom but it went lag and it stuck there, so I pressed the volume up and down and the power button again to escape from lag but after the format The phone is stuck at the recovery mode even though I pressed reboot or power off.
Now I tried to Flash it using Sp flash tool (latest version) but I forgot to press the "format and download" instead I pressed the "download" right away with its stock Rom (also I forgot to press the checksum in the download options) and the installation continued but it did not went 100% but it is stucked at 25% or 24%
Now my phone just displays The lenovo logo with "Dl tool failed! " below
Pls help me (sa mga pro dyan)
I cant get it to fastboot
I've flashed custom recovery but it makes the screen all black when I turn it on
I also flashed it in sp flash tool the old version 3.13 something and still only 25%
PLS PLS PLS HELP ME
It's worth trying Lenovo's Smart Assistant. This is an official PC suite that looks like it can flash the latest stock rom onto your phone for you. You'll find it here: http://lenovomobilesupport.lenovo.com/gb/en/products/Phones/S-Series/S860-Smartphone/downloads/DS101291
I personally don't have a Lenovo phone but I've used Sony's PC software to fix similar problems to yours before now.
This will mean that your phone won't be rooted but at least it will work and you can then root it and reinstall what you need.
Let me know if this helps!
i am using leeco 1s x507 indain version mobile. it was working fine but i just flashed twrp via fastboot, and it unlocked bootloader.
there was still no problem my mobile was working fine. but after flshing some custom rom and many other tweaked eui. i noticed that my device is misbehaving, like low media volume, hanging, automatic restart, and a yellow border on screen etc.
i tried many time to lock my bootloader via fastboot but everytime it gets failed to lock.
so i decided to flash stock eui 5.5.014s via sp flash tool but sp flash tool is giving me error- brom error failed to flash da(2004)
i reflashed stock recovery via fastboot it was successful but it didn't help me.
i am still getting brom error 2004.
is there anyone to help me.
anyone please help me.
i noticed that here no body wants to help anyone.:crying:
I just flashed my blackview bv5500, with the stock rom using mediatek sp flash tool, before flash I made "format whole flash" (probably this was the mistake)
After this I flashed from download tab and got ok message at the end. But when I try to switch on the device the screen switches on because I see the light, but it is stuck on black and no any logo.
Is there any solution for this?
Thank you for your help I promise to help back when I can
Nice! I solved with different rom for brick problem, but original problem still there, device always boot in recovery mode and no any way to boot on android
Any help on this problem? My device always boot in recovery
Same problem, what ROM did you use to fix it and get your screen back ?