My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
It seems that MMX has locked the Bootloader after the LP OTA update. So try booting to fastboot and then with a connected PC, unlock the Bootloader with the fastboot oem unlock command. Then use SP Tools to flash a custom recovery. I've seen that this takes a few tries so go at it again and again, removing and reconnecting the usb cable until the flashing occurs(of course, assuming that you have all necessary usb drivers installed). Philz and TWRP themed version seems to be working fine(haven't thoroughly checked the others).
akhil4845 said:
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/uni...very-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
Click to expand...
Click to collapse
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Yeah I got it...... Thank you all
ChahatGupta said:
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Click to expand...
Click to collapse
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
vasup0261 said:
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
Click to expand...
Click to collapse
hi can some one help me out with this.
Please.
I had the same problem. Try to install stock rom with pc it will get back stock recovery
My Oppo F1F is brick/Bootloop
I tried to flash the Stock Firmware from Phone Storage (FAILED AFTER FEW SECS) Flash Stock Firmware from SD Card (FAILED WITHIN 1 SEC)
I tried using QualCom FlashTool still bootloops. I tried many Firmwares I Have like 5 in my PC none of them works. My recovery is now on stock and my Fastboot is now locked after flashing via QualCom Flashtool. My ColorOS recovery says v1.2 (Rooted) I've been flashing stock firmwares without any luck. I just want to use my phone regularly. I no longer want a rooted phone. Can someone help please?
I was able to fix my issue.
phaw16 said:
I was able to fix my issue.
Click to expand...
Click to collapse
How di u fix your issue?
Please tell me, i also have similar problem
My recovery mode and fast boot mode are not working, I'm not able to factory reset my phone
Hello I have letv 1s eco x509 mobile phone.I had lost my baseband and imei no's after flashing a rom. The fix for this, I found was to revert back to stock firmware.
So to do this i used sp flash tool.
I choose format all + download.
It formatted and then while flashing it stopped at 6% and stayed at 6 for a minute then showed an error:
BROM ERROR : S_DA_UART_DATA_CKSUM_ERROR(3064).
I couldnt find the meaning of this error anywhere.
I attempted to flash it again several times but the flash would usually get stuck at around 3-6% and show this error.
How can I fix it?
Phone details
Letv 1s eco x509
MT6795.
Hi guys, i need your help!
i will try to explain the situation at my best.
A couple of days ago i decided to go back from a custom ROM to the Stock one via TWRP flash and i ended up with a soft brick, later i managed to flash the stock rom with SP Flash tool.
Yesterday i tried to get ROOT access on the fresh installed stock rom and considering that i wasn't able to get ADB and Fastboot to work properly on my pc (at the time) i used King Root, after that i tried to install TWRP through the official app, the result was not successful (the problem was the locked bootloader) and i found myself without recovery (neither TWRP or Stock).
Here comes the last part (the tricky one)
after all this mess I managed to get ADB and Fastboot to work and i obviously tried to unlock the bootloader, unfortunatly i hit "boot to recovery" and now i'm stuck with a boot loop with no recovery.
if i try to get to fastboot with Vol down+Power the phone shows the LeEco Logo and then the screen shuts down.
Sp Flash tools doesn't work either.
Any possible solution?
The thing u got wrong is that... U should have flashed twrp on either eui 5.8.17s or 5.8.19s...
Don't flash it on 14s or lower eui version ... It might get stuck on bootloop
[SOLVED]
Hey guys,
I recently had a problem with my Le 1s the screen went static and whenever I reboot the Le logo flashes 5 times before showing the static screen.
so I panicked and flashed 14s ROM with SP tools to no avail after this the fast boot started flashing 5 times and didn't open.
I gave it to my local repair shop and he replaced the screen and Imei was lost when I flashed SP tools he fixed it too and it solved the static screen issue but the 5 times flashing continued.
I asked him about it but he said he can only help with hardware and the problem seems the software.
I want to get the fastboot mode working to flash a newer version of EUI + volte (TWRP method)
please help guys should I flash 14s again? to get the fastboot mode?
SOLVED A LAST: I was scared to try out other ROMs after the incidents and I found out that EUI 14s Doesn't have a fast boot(vol- + power)
Fastboot mode is added in 6.0(EUI 17s). I have upgraded and everything is back to normal.
1. 14s ---> 17s
2. TWRP Via Fastboot adb
3.19s via TWRP
4. 23s via TWRP
Now running 28s non VIP unrooted VOLTE