Database Info

How to enable usb debugging mode when phone is bricked

Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......

Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:

sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
No I said I can't install a rom via recovery it gets unknown error ....
But Now I have another question how to enter mt5689 in Fastboot/Flash Mode manually via pc .....with flash tool......

plz can anyone tell how to enable usb debugging mode when phone is bricked.....

if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.

Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
Now listen to me very carefully! Don't even try to flash a new firmware to your mobile which is not for your mobile and face the same fate as did! Your place is needrom.com. just contact the site administrator for your device model and he will help you... Believe me!

Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..

Did you choose correct model and version?
Sent from my Q900 using XDA Premium 4 mobile app

Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
You just brought a sigh of relief & smile to my face..
Not just that-you helped me restore my phone with less worry..
Thanks a tonne :angel:

software brick
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???

henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
same problem here ..?? did u get any solution ??

Please Help...
Saraf Vikyath said:
same problem here ..?? did u get any solution ??
Click to expand...
Click to collapse
Nobody? You got a solution already?
I have a brick Xperia SP with UBL and I tried to relock via flashtool and then repair via Pc Companion, but still detects the modifications...

Guys....my question is how to enable usb debugging on a soft bricked device

help me bricked micrmex express 2 plz

my phone too .. I forgot to switch my USB debugging...

Help!!!!!
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
Help i have the same problem, put a custom boot loader on an asus zenfone 2 ze551ml and I couldnt get my passcode to work so I put it in recovery mode and wipe devit cache and it took longer than it should so I forced phone off and ever since then the phjone turns on but loops. I have tried to manully put the phone fastboot and doing that but didnt work. and even tried to update from ADB and that even didnt work. I have tried everything but no luck. Please help me. or email me too [email protected]

The bootloader of my htc desire s is locked and the phone is also not turning on , my usb debugging modhe was disabled, now i need to unlock the bootloader . help me please

sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
hello!,i wanna ask some question
so right now my phone is stuck on boot or bootloop,and i actually have the stable rom in my phone but the name is not "update.zip" and i forgot to enable usb debugging,is there anyway to access my internal storage without usb debugging
my phone is xiaomi mi4,thanks!:good:
---------- Post added at 06:59 AM ---------- Previous post was at 06:54 AM ----------
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!

chandrakaii said:
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
Click to expand...
Click to collapse
Stable rom as in stock rom? or a stable custom rom?
in any case. if you have cwm or twrp you should be able to access the file on your computer, or even transfer it to an sd if the phone has it..
if its a custom rom flashable zip though you you might as well just flash it.
if its a stock rom an you cant aces recovery then you have to redownload it to your pc....

Shahid Niazi said:
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Click to expand...
Click to collapse
Now you can't unbrick your phone because you overwritten the preloader of your phone. Remember: when flashing with SP flash tool you mustn't flash the preloader. The preloader is the file that makes possible the flashing with SP and now that you have overwritten it or flashed the wrong one, you probably won't be able to recover it. Take it to service center.
Sent by my iPad using Tapatalk

No recovery

After flashing cwm ver 6 and kitkat am facing new problems.My phone got bricked and i restore via kdz updater but after this i cant access my stock recovery.evry time i tried the phone is getting restarted in factory settings .i tried so many ways but no use..pls help me to restore my stock recovery without that i cant flash any recovery or roms ..pls reply fast and help me

rijukrishnan said:
After flashing cwm ver 6 and kitkat am facing new problems.My phone got bricked and i restore via kdz updater but after this i cant access my stock recovery.evry time i tried the phone is getting restarted in factory settings .i tried so many ways but no use..pls help me to restore my stock recovery without that i cant flash any recovery or roms ..pls reply fast and help me
Click to expand...
Click to collapse
Flash stock rom but with CS_EMERGENCY mode in kdz.

Bootloader and Stock Recovery Lost

My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:

It seems that MMX has locked the Bootloader after the LP OTA update. So try booting to fastboot and then with a connected PC, unlock the Bootloader with the fastboot oem unlock command. Then use SP Tools to flash a custom recovery. I've seen that this takes a few tries so go at it again and again, removing and reconnecting the usb cable until the flashing occurs(of course, assuming that you have all necessary usb drivers installed). Philz and TWRP themed version seems to be working fine(haven't thoroughly checked the others).

akhil4845 said:
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/uni...very-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
Click to expand...
Click to collapse
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!

Yeah I got it...... Thank you all

ChahatGupta said:
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Click to expand...
Click to collapse
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.

vasup0261 said:
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
Click to expand...
Click to collapse
hi can some one help me out with this.
Please.

I had the same problem. Try to install stock rom with pc it will get back stock recovery

Honor 6 L12 rooted, TWRP Installed, shows unlocked bootloader

Hello everyone,
I've honor 6 L12 rooted, unlocked bootloader as I can see in fast boot and multi tool, I've installed TWRP recovery.
I just made a backup through TWRP saved in internal SD storage, and try to install but since that try, I hade problem like model changed to L01 and my version is ending with B000
Also the shape and look (of firmware and theme), have been changed.
I don't know what happened and why!
I tried to to restore custom rom and recovery but couldn't.
Now I can't use recovery mod because it's giving me this: Error!
Function No : (Func_Boot_RECOVERY)
Error No : 2
I've tried to use multi tool giving me error with any writing to device:
Faild remote command not allowed
Note: I'm still able to access normal mod, but it's hard, I've to try ton of times pressing buttons to boot to normal mod.
Please any help dears.

Update:
Now my device is not booting to nermal mode anymore.
I kept flashing through unbrick tool in multitools.
But I don't know exactly which firmware and model to flush!
And now I'm stuck on recovery mode (also with same error above) and fastboot mode when I restart and connect device to pc keep pressing volume down.
Any single help!

ALHARTHI6 said:
Update:
Now my device is not booting to nermal mode anymore.
I kept flashing through unbrick tool in multitools.
But I don't know exactly which firmware and model to flush!
And now I'm stuck on recovery mode (also with same error above) and fastboot mode when I restart and connect device to pc keep pressing volume down.
Any single help!
Click to expand...
Click to collapse
Which firmware you were on before issue?

No I didn't
As I said trying to restore my backup through TWRP but was in internal SD., that's it.
My real model is L12.
Version, I don't remember but it was on android 5.1.1 EMUI 3.1
Now I just used Sd method and recover device with last 4.0.1 EMUI for devolvers, but no Arabic language.
How to go to another firmware?
What is the best, satable one for my device?
And is there a good custom stable rom, especially if android 7 ?
Please full answer if available
Thanks again

Redmi Note 7 Pro - Stuck in recovery mode

Hi,
I recently got a Note 7 pro from China as a gift and I flashed it to global rom using fastboot. But because there was an app that wasn't working anymore and people have suggested its because the phone is in unlocked mode, so I went ahead and used ADB to lock it and now it's stuck in this recovery mode 3.0. Does anybody know how to either reset the phone or bypass this? Thanks in advance.

First unlock bootloader & flash again with fastboot rom

Locking and re-unlocking the bootloader
To lock the bootloader, the device has to be clean installed in Fastboot mode. For the instructions, see this page.
Once a device has been unlocked, it can be locked and re-unlocked using the same account countless of times, anytime, on any official or custom ROM.

BobbeyW said:
Hi,
I recently got a Note 7 pro from China as a gift and I flashed it to global rom using fastboot. But because there was an app that wasn't working anymore and people have suggested its because the phone is in unlocked mode, so I went ahead and used ADB to lock it and now it's stuck in this recovery mode 3.0. Does anybody know how to either reset the phone or bypass this? Thanks in advance.
Click to expand...
Click to collapse
1. Unlocking the phone will never affect any app except Mi Find My Device or other Mi Security (that too it isn't much of an impact)
2.. Now use Mi Unlock to unlock the bootloader, since you already unlocked it would unlock immediately but will also format your phone..
3. Now never lock the bootloader while using a custom ROM

Just tried but won't work... it says that this account is not bound by this device. I think it's in a *bricked* state.

Same here. Cannot unlock. Tried fastboot install with miflashtool.

I think you sign out of mi account before locking bootloader if you have done this then you have to visit service centre, they will be able to flash as they have authorised account or else you can try extracting rom into adb folder & direct click on clear all.bat file if it works

Yes, this is the problem. My mistake was installing pixel experience. After install, the device don't boot up and goes în bootloop and I wasnt able to turn off the device. After, I boot up în fastboot and flashed fastboot stock rom. This rom relocked the bootloader but don't boot. The version of stock rom is the good one, only one from miui site for Redmi Note 7 pro available. My device don't boot and cannot install anything neither stock or custom. The recovery is now stock without the option to turn off or installing update. Maybe i will try @navi_58861170's method. Maybe it will work. În other case we must use edl method which is a little tricky. If you find another way, tell me.

Not working. Sadly.

mitomanu said:
Not working. Sadly.
Click to expand...
Click to collapse
What is the error you are getting

Xbl error. Cannot flash on locked bootloader. Now my device was Sent to service.

i debloated my note 7 pro, now im stucked on recovery mode
pls help :<

chrislerchrisler said:
i debloated my note 7 pro, now im stucked on recovery mode
pls help :<
Click to expand...
Click to collapse
Download the full recovery ROM, Boot to recovery, and dirty flash the ROM.
Additional info : next time maybe debloat using
XiaomiADBFastbootTools.

Lost inbuilt recovery and peter twrp after custom rom flashing
I cant boot into any recovery mode afer installing any the custom roms like pixel experience in redmi note 7 pro violet.
whenever it try to boot into recovery mode , it cannt boot up into any recovery mode. please help me. i am tired of flashing stocked rom again and again for flashing new customs rom. i lost its all recovery mode,neither twrp nor its inbuilt recovery mode. phone only get restarting in normally.