Hi!
I have a question, I am on the CARHDRom, not the 8.0 but the Note ported ROM from about a month ago.
Can I use ODIN and flash the stock ROM for the G955F with the 4 files to have a "clean" handy without root and with the settings as it came from the factory?
The 4 part ODIN Firmware I have is the AQH3 Firmware. If someone can answer, have I got to use the HOME_CSC or the other CSC file? The Firmware is DBT (for germany) and this is right for me.
Any help needed
lienot
You can return your phone to fresh using the stock OEM ROM. Use the stock CSC file, as that will clear our your Note 8 port CSC, which I'd guess you'd have.
Don't use the Home CSC, unless you wish to have your old CSC data remain on the phone.
Thanks a Lot,
No I finally know the exact difference between the two CSC files.
lienot
Lienot said:
Hi!
I have a question, I am on the CARHDRom, not the 8.0 but the Note ported ROM from about a month ago.
Can I use ODIN and flash the stock ROM for the G955F with the 4 files to have a "clean" handy without root and with the settings as it came from the factory?
The 4 part ODIN Firmware I have is the AQH3 Firmware. If someone can answer, have I got to use the HOME_CSC or the other CSC file? The Firmware is DBT (for germany) and this is right for me.
Any help needed
lienot
Click to expand...
Click to collapse
Yes you can flash the 4-file firmware, using AP, BL, CP and CSC_OXM (not HOME_CSC).
Just keep in mind that AQH3 is quite old (August 2017), and the newest firmware available is AQL5 (December 2017).
You should flash that instead.
Related
Hi guys
i got S7 930FD XSG,
Rooted using this Method [Recovery][Exynos] Official TWRP for Galaxy S7 (herolte)
Somehow mistakenly Turned off OEM
Device locked, Reinstalled Stock ROM using "Smart Switch"
Again rooted by above method.
Now OTA updates aren't available.
So I have two question, actually one confusion and one question.
As when i reinstalled ROM using Smart Switch, in Smart Switch it says "930F" instead of 930FD, while is device info it say 930FD.
1. are there same or single system/OS for both version ?
If yes, then can i install ROM of 930F XSG, with same AP and CSC of My device, i am attaching screenshot to share more info...
View attachment 4057525
View attachment 4057526
2. If answer to 1st question is yes and safe, then can i just Flash only AP file, leaving BL, CP, CSC etc ?
I just want to get latest update (either via Odin or OTA)
Regards
No help ??
Have a look in download mode what it says the device is, flash all 4 part of the ROM using ODIN 3.12.3
CSC will reset the phone
HOME_CSC will not
If you are upgrading or downgrading Android versions, use CSC to avoid problems
G930FD uses the exact firmware that G930F uses. So yes, they're the same.
Flash BL, AP, CP and CSC file (not HOME_CSC) if you want to return stock and have OTA updates. Remember this will format your phone. It's later up to you whether you want to root again or just remain on stock.
When i installed this rom, It didnt give my the option to install my correct CSC. Can i flash my CSC through odin? ONly one small thing. the CSC i have is 6.0.1 and the ROM im running is 7.0
shotgun10ga said:
When i installed this rom, It didnt give my the option to install my correct CSC. Can i flash my CSC through odin? ONly one small thing. the CSC i have is 6.0.1 and the ROM im running is 7.0
Click to expand...
Click to collapse
Hi
No all countries CSC are available yet , probably in the next weeks they may that is why there are not many choices yet
Flashing CSC thru Odin on top of rom.....not to sure about that
Did you check his thread about CSC? , hi has a tool to add different csc's maybe your country is already there ( pick the one for Nougat
If is not there and you must have it ....i would flash a stock rom with the desire CSC , install recovery again , flash Superman rom again and this time tell to keep your current csc
Remember if you use a MM csc on a N firmware some thing may not work like VoLTE
I just Odin flashed home csc from the latest sample for my carrier .... the latest I had already previously used on stock b4 flashing superman rom.
Hello,
Is it possible to downgrade from Nougat back to Marshmellow without triggering Knox ?
I upgraded my S7 via OTA Update. Now i have big trouble with the GPS indoors while playing Pokemon Go. The location via wifi seems messed up in 7.0. On 6.0.1 i never had problems.
Can i just flash the latest 6.0.1 (G930FDBT1BPH2) via Odin ? Or can there be a problem with the Bootloader which could be upgraded during the 7.0 Update ?
Does this procedure trigger Knox ? I want to keep the phone on Stock Firmware without rooting oder custom Firmware.
I downloaded the 6.0.1 from updateo with the following files :
AP_G930FXXU1BPLB_CL9689434_QB11912457_REV00_user_low_ship.tar.md5
BL_G930FXXU1BPLB_CL9689434_QB11912457_REV00_user_low_ship.tar.md5
CP_G930FXXU1BPJJ_CL9519568_QB11350220_REV00_user_low_ship.tar.md5
CSC_DBT_G930FDBT1BPH2_CL8887037_QB10698583_REV00_user_low_ship.tar.md5
HOME_CSC_DBT_G930FDBT1BPH2_CL8887037_QB10698583_REV00_user_low_ship.tar.md5
Can i just fire up Odin and put these files according the first letters in the fields ?
Greetings,
Chris
Yea just flash with ODIN
CSC = Reset (You'll need to choose this one to downgrade as 7.0 apps are not compatible with 6.0)
HOME_CSC = No reset
Only flashing custom will trip knox, flashing stock with ODIN will not trip it
*Detection* said:
Yea just flash with ODIN
CSC = Reset (You'll need to choose this one to downgrade as 7.0 apps are not compatible with 6.0)
HOME_CSC = No reset
Only flashing custom will trip knox, flashing stock with ODIN will not trip it
Click to expand...
Click to collapse
Thank you
Just for my safety
I need the first 4 files. Put em into the 4 fields in Odin 3.11.1 including BL - Bootloader (This part ist the most fear for me ) and flash them with "F-Reset Time" and "Auto Reboot" selected ?
After rebooting the phone a Full wipe is a good thing, i think.
chr2002 said:
Thank you
Just for my safety
I need the first 4 files. Put em into the 4 fields in Odin 3.11.1 including BL - Bootloader (This part ist the most fear for me ) and flash them with "F-Reset Time" and "Auto Reboot" selected ?
After rebooting the phone a Full wipe is a good thing, i think.
Click to expand...
Click to collapse
Use ODIN 3.12.3 or newer, that version is too old
3.12.7
Code:
https://mega.nz/#!jUgRiTSa!fnAVwr7yFi4dlPk4V0oQ5DuoFe3iiG0jH-ws91IHOPc
Flash AP, BL, CP and CSC
The phone will automatically factory reset after the flash so no need to wipe again
DO NOT change anything in ODIN, leave everything as it is
*Detection* said:
Use ODIN 3.12.3 or newer, that version is too old
3.12.7
Code:
https://mega.nz/#!jUgRiTSa!fnAVwr7yFi4dlPk4V0oQ5DuoFe3iiG0jH-ws91IHOPc
Flash AP, BL, CP and CSC
The phone will automatically factory reset after the flash so no need to wipe again
DO NOT change anything in ODIN, leave everything as it is
Click to expand...
Click to collapse
Thank you for your Help. I´ll do it exact this way
Hello I am very new to this and like to know if i can downgrade too from android 7 if there is a security path already applied to the phone? Can I also just flash it with Odin stock rom?
Do I need the exact build number or just model number? And does model number needs to be the same so I got SM g930v? Can I flash from different country that is not G930V but G930F
And would the PDA number also need to match? Thanks for helping!
Silkwormgirl said:
Hello I am very new to this and like to know if i can downgrade too from android 7 if there is a security path already applied to the phone? Can I also just flash it with Odin stock rom?
Do I need the exact build number or just model number? And does model number needs to be the same so I got SM g930v? Can I flash from different country that is not G930V but G930F
And would the PDA number also need to match? Thanks for helping![/QUOTE
You cannot flash a G930F firmware on a G930V device. They have different hardware. You need to flash G930V firmware
Click to expand...
Click to collapse
thank you can you tell me why it needs the exact same model number when the phone is still the same S7?
1. how about PDA will i need that the long build number will that needs to be the same?
2. I will need to flash the same model number to root it? And not a different model number?
Thanks!
Silkwormgirl said:
Hello I am very new to this and like to know if i can downgrade too from android 7 if there is a security path already applied to the phone? Can I also just flash it with Odin stock rom?
Do I need the exact build number or just model number? And does model number needs to be the same so I got SM g930v? Can I flash from different country that is not G930V but G930F
And would the PDA number also need to match? Thanks for helping![/QUOTE
You cannot flash a G930F firmware on a G930V device. They have different hardware. You need to flash G930V firmware
Click to expand...
Click to collapse
mrao said:
You cannot flash a G930F firmware on a G930V device. They have different hardware. You need to flash G930V firmware
Click to expand...
Click to collapse
Can you explain why the hardware is different?
And with Flashing using ODIN do I only need the model number and nothing else?
Silkwormgirl said:
Can you explain why the hardware is different?
And with Flashing using ODIN do I only need the model number and nothing else?
Click to expand...
Click to collapse
The USA variants use a qualcomm chipper, the G930F (international model) uses an exynos chipper. You will end up bricking it by trying to flash incompatible firmware
Hello,
last days I flashed the new Oreo firmware for my SM-G930F, available now only for UK (BTU CSC code). I used the last odin version 3.13.1. When the firmware was flashed, after factory recet I received my old CSC code (XEO). I wrote in forums, that if I want to changthe default CSC I have to set in odin settings Repartition. So yesterday evening I decided to reflash the firmware, but now with ticked Repartiotion. When I cklicked on Start, afer one two seconds red Fail windows has been shown. Why I can't flash the firmware with set Repartition? Does somebody have an idea what went wrong?
Reasons why I want to change the CSC code by default from XEO to BTU is that BTU receives the updates at the earliest!
Gisar said:
Hello,
last days I flashed the new Oreo firmware for my SM-G930F, available now only for UK (BTU CSC code). I used the last odin version 3.13.1. When the firmware was flashed, after factory recet I received my old CSC code (XEO). I wrote in forums, that if I want to changthe default CSC I have to set in odin settings Repartition. So yesterday evening I decided to reflash the firmware, but now with ticked Repartiotion. When I cklicked on Start, afer one two seconds red Fail windows has been shown. Why I can't flash the firmware with set Repartition? Does somebody have an idea what went wrong?
Reasons why I want to change the CSC code by default from XEO to BTU is that BTU receives the updates at the earliest!
Click to expand...
Click to collapse
BTU contains XEU as it is Multi-CSC, you cannot switch between them directly
You need to flash a different region CSC not included in BTU first, then flash BTU
*Detection* said:
BTU contains XEU as it is Multi-CSC, you cannot switch between them directly
You need to flash a different region CSC not included in BTU first, then flash BTU
Click to expand...
Click to collapse
Which for example? Can I use one of the following: VOD or VDI? Both of them have available Oreo firmwares. Oherwise I have to downgrade to Nougat (by the way, how can I downgrade using odin?)
Gisar said:
Which for example? Can I use one of the following: VOD or VDI? Both of them have available Oreo firmwares. Oherwise I have to downgrade to Nougat (by the way, how can I downgrade using odin?)
Click to expand...
Click to collapse
One with the same bootloader version as you are running, probably version 2
You can tell by this number in the firmware version
G930FXXU2ERD5
Have a look in download mode for B:2 or whatever number it says and match to the firmware
Downgrade the same way you upgrade, but use ODIN 3.12.7 for Nougat
Do not flash the VOD (vodafone) Oreo, it is bricking devices, very broken, only flash BTU Oreo
*Detection* said:
One with the same bootloader version as you are running, probably version 2
You can tell by this number in the firmware version
G930FXXU2ERD5
Have a look in download mode for B:2 or whatever number it says and match to the firmware
Downgrade the same way you upgrade, but use ODIN 3.12.7 for Nougat
Do not flash the VOD (vodafone) Oreo, it is bricking devices, very broken, only flash BTU Oreo
Click to expand...
Click to collapse
One moment, I want to switch from XEO (Poland) to BTU by defauld, not from XEU. Can you explain more deteiled haw to proceed (I am not so experienced)? Thanks in advance!!!
Gisar said:
One moment, I want to switch from XEO (Poland) to BTU by defauld, not from XEU. Can you explain more deteiled haw to proceed (I am not so experienced)? Thanks in advance!!!
Click to expand...
Click to collapse
Exactly the same as XEO is also included in the BTU CSC
*Detection* said:
Exactly the same as XEO is also included in the BTU CSC[/QUOTE
What about flashing the same firmware with odin 3.13.1, but with ticked repartition in the option? This, regarding the comments in sammobile forum works. But for me doesn't. Maybe for Oreo it doesn't work or there is something specifically to do?
I can't catch your proposal for flashing the other firmware. Can you tell me which exactly firmware I have to flash first, later on to receive BTU Oreo CSC as default?
Click to expand...
Click to collapse
When I flash first MTL CSC android 7 and then flash oreo BTU, will it change my CSC code from XEO to BTU?
hi falks.
i have j7 sm-g610f 7.0
i want to flash oreo that just got out in india:
https://www.sammobile.com/firmwares/galaxy-j7-prime/SM-G610F/INS/download/G610FXXU1CRI4/237611
and here things get tricky.
i live in another region.
i tried to flash it with odin but i'm getting fail all the time in odin.
here are my questions:
1. can i flash with odin the oreo files: BL, AP, CP (and keep in mind that they are 8.1.0) and the CSC (7.0) file form my region?
2. if the answer is yes, i won't brick my device?
3. can i downgrade from 8.1.0 to 7.0?
Update:
I live in ILO region, so just that FYI:
I managed to flash stock 8.1.0 INS on my sm-g610f and everything is working fine.
My USB cable was damaged, that's it.
Good luck to all.
Mine is F version but its MID firmware. Can I flash this from nougat to oreo ?