Hi, first flashed french 5.1.1 and now that vodafone has released the branded 5.1.1 want to back to stock (ATL) but when flash the sammobile package the csc changes to SIM (vodafone slovenia) and there´s no way to change the csc.
I´ve reading a lot and seems the ATL package is multicsc and flashing defaults to SIM. and there´s no possibility to change csc because cant root 5.1.1
Im totally stuck. Why want the branded? the operator customization and VoLTE activation.
Thanks to all
Do a factory reset in the bootloader, boot up and then flash the operator rom again
*#272*IMEI#
Tried flashing, boot, wipeall twice, flashing wipe data and cache but the multicsc stays as SIM csc...
*#272.... doesnt work in this devices.
tried to downgrade to 5.0.2 and root to change manually csc but the bootloader is upgraded keeping downgrades.
the only hope is pingpongroot or anyone can root 5.1.1 without tripping knox
Bring your S6 back to Samsung for official ROM flashing back to stock.
Only way to change CSC is to root...
roydok said:
Only way to change CSC is to root...
Click to expand...
Click to collapse
Not true. I did it several times on unrooted stock devices.
godutch said:
Not true. I did it several times on unrooted stock devices.
Click to expand...
Click to collapse
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.
roydok said:
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.
Click to expand...
Click to collapse
Did you let the phone boot completely after flashing the new firmware and then do the wipe from recovery?
Yes I did. My unit is G920FD from Philippines. Downloaded 5.1.1 Globe Philippines (CSC:GLB) from Sammobile. After successful flash via odin with Full wipe at recovery the CSC defaulted to THL (Thailand). I tried all Phillipine-based 5.1.1 ROMs from Sammobile and flashed them all (3) with full wipe at recovery each time but sadly still CSC is still THL (Thailand).
roydok said:
Yes I did. My unit is G920FD from Philippines. Downloaded 5.1.1 Globe Philippines (CSC:GLB) from Sammobile. After successful flash via odin with Full wipe at recovery the CSC defaulted to THL (Thailand). I tried all Phillipine-based 5.1.1 ROMs from Sammobile and flashed them all (3) with full wipe at recovery each time but sadly still CSC is still THL (Thailand).
Click to expand...
Click to collapse
You could try without a simcard (flash, boot up, wipe in recovery) or a different simcard. I never manage to change csc either in 1 go and the results can be different, eg sometimes I get Vodafone apps installed and sometimes not....
Will try it without a SIM card. Thanks.
roydok said:
Will try it without a SIM card. Thanks.
Click to expand...
Click to collapse
Did this work in the end? I've got exactly the same issue except my CSC is stuck on SIM (Slovakia) when I want it to be UK
greenredblue said:
Did this work in the end? I've got exactly the same issue except my CSC is stuck on SIM (Slovakia) when I want it to be UK
Click to expand...
Click to collapse
I also tried it but couldn't get it to the correct CSC (VDF in my case) either, I can do it with other packages and get it to PHN (dutch)
roydok said:
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.
Click to expand...
Click to collapse
I have had managed the csc change also with odin, fw flashing. BUt it took at least 10 flashing, but did it.
please note, that I have had issues after ANY of XEF firmware flasing. After XEF fw, I was very difficult to do this odin flashing method succesfully. BUT it did.
but I cannot rememe what was the sequence of this procedure. I was using 5-6 different ZIPs from sammobile.
tiborprogmed said:
I have had managed the csc change also with odin, fw flashing. BUt it took at least 10 flashing, but did it.
please note, that I have had issues after ANY of XEF firmware flasing. After XEF fw, I was very difficult to do this odin flashing method succesfully. BUT it did.
but I cannot rememe what was the sequence of this procedure. I was using 5-6 different ZIPs from sammobile.
Click to expand...
Click to collapse
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?
greenredblue said:
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?
Click to expand...
Click to collapse
i have flashed the XEF. and that was wrong. esspecially it broke the spo2, and stress measuring... I would go back to another, BUT after XEF, I always had flashing interrupt in the HIDDEN file stage.
But after I have found a flashable FW again ( maybe SER or SEB) I was able to flash XEH, or BTU. and it was changing the XEF to SEB OR SER after wipe in recovery.
The only rom I will never flash againt is XEF.
ps: i never root this 920F
greenredblue said:
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?
Click to expand...
Click to collapse
Now I was able to reproduce it twice!!! :
How it works : on devices where dialer NOT shown up CSC changer (e.g.: GS6920F) :
Go to recovery, Dial up, Home + Power
wipe cache and perform a factory reset
next is important : power down the phone. NOT to reboot.
Power on in download mode: volume down+home+power buttons
FLASH for example : BTU :
G920FXXU3COI9_G920FBTU3COJ1_G920FXXU3COI9_HOME.tar
after reboot, it will be English, and If U go to recovery it will apply BTU.
Hope it helps
p.s.: It wont works with EVERY Firmware. don't know WHY. For example :
I wanted to flash after succesfully changed the CSC from TPH to BTU, so I wanted to flash XEH....BUT that resets to TPH after XEH flash.
So at least to BTU it works specially if you are in TPH CSC !
I have been searching around and haven't fond any clear answers around these questions. I have an exynos S7 and I want to change my CSC to the XSA (Australia version)
My understanding is the way to change CSC is to flash a stock firmware with the CSC you want.
- If I flash the stock rom will it wipe my data? Do I need to have "repartition" unticked to keep my data?
- Do I have to flash a newer firmware or can i flash the same/earlier firmware?
- In fact, can I just flash the XSA CSC without the rest of the firmware?
Many thanks to anyone who can help.
You don't need to flash stock firmware to get another CSC, just download the specific CSC zip flashable and flash or use Multi CSC flasher via TWRP
Thanks but I should have clarified, I want to keep knox untripped.
Do you know if stock rom flash with a new csc will cause a wipe?
oswade said:
Thanks but I should have clarified, I want to keep knox untripped.
Do you know if stock rom flash with a new csc will cause a wipe?
Click to expand...
Click to collapse
Hi mate
Check this thread , read it , it will guide you on what you have to do to change your csc without wiping ( home_csc)
http://forum.xda-developers.com/galaxy-s7/how-to/official-stock-firmware-update-odin-t3369431
Flashing ( odin ) stock firmware does not trip knox........
EDIT:Yes We Can Simply flash Firmware with ODIN
hi everyone
I've s6 g920fzkvia and currently no Nougat available for my cell.
I wana flash it with XSG firmware ..
In phone infon compatible csc are VIA,XEC
Can I flash XSG?
If yes, how?
Hi!
I have a question, I am on the CARHDRom, not the 8.0 but the Note ported ROM from about a month ago.
Can I use ODIN and flash the stock ROM for the G955F with the 4 files to have a "clean" handy without root and with the settings as it came from the factory?
The 4 part ODIN Firmware I have is the AQH3 Firmware. If someone can answer, have I got to use the HOME_CSC or the other CSC file? The Firmware is DBT (for germany) and this is right for me.
Any help needed
lienot
You can return your phone to fresh using the stock OEM ROM. Use the stock CSC file, as that will clear our your Note 8 port CSC, which I'd guess you'd have.
Don't use the Home CSC, unless you wish to have your old CSC data remain on the phone.
Thanks a Lot,
No I finally know the exact difference between the two CSC files.
lienot
Lienot said:
Hi!
I have a question, I am on the CARHDRom, not the 8.0 but the Note ported ROM from about a month ago.
Can I use ODIN and flash the stock ROM for the G955F with the 4 files to have a "clean" handy without root and with the settings as it came from the factory?
The 4 part ODIN Firmware I have is the AQH3 Firmware. If someone can answer, have I got to use the HOME_CSC or the other CSC file? The Firmware is DBT (for germany) and this is right for me.
Any help needed
lienot
Click to expand...
Click to collapse
Yes you can flash the 4-file firmware, using AP, BL, CP and CSC_OXM (not HOME_CSC).
Just keep in mind that AQH3 is quite old (August 2017), and the newest firmware available is AQL5 (December 2017).
You should flash that instead.
I'm planning to flash a Germany CRC7 ROM but my CSC is not german. Will there be any errors in stock recovery or will it just change my CSC?
I remember flashing CRB7 from a thread here using stock recovery and I don't know how that didn't change my CSC. Any help is appreciated.
My phone is unlocked by the way.