Hard brick or just wrong boot.img - Mate 8 Q&A, Help & Troubleshooting

Hi guys. I have 64gb mate 8 4gb ram. I was on nxt l29c185b200.
SRK tool video is pretty cool but somboons isn't the best at clarifying things too much, for eg if you were or are on c185b200, you don't need to use srk tool to rebrand to c432b560. Of course I didn't know that until much later. Which is why im extrmley ticked off.
In any case. I only have access to Huawei erecovery and rescue mode. In rescue mode I get in red : attention. Please update system again.
At the bottom I have error function NO : 10 boot image in brackets and beneath that I also error NO : 2 load failed also in brackets.
I've tried using SRK tool to install twrp again but all I get is waiting for device in SRK tool.
I'm in serious need of assistance, what steps can I take in srk tool? Or what else can I do to unbrick this?

ubermorgan said:
Hi guys. I have 64gb mate 8 4gb ram. I was on nxt l29c185b200.
SRK tool video is pretty cool but somboons isn't the best at clarifying things too much, for eg if you were or are on c185b200, you don't need to use srk tool to rebrand to c432b560. Of course I didn't know that until much later. Which is why im extrmley ticked off.
In any case. I only have access to Huawei erecovery and rescue mode. In rescue mode I get in red : attention. Please update system again.
At the bottom I have error function NO : 10 boot image in brackets and beneath that I also error NO : 2 load failed also in brackets.
I've tried using SRK tool to install twrp again but all I get is waiting for device in SRK tool.
I'm in serious need of assistance, what steps can I take in srk tool? Or what else can I do to unbrick this?
Click to expand...
Click to collapse
you managed to recover your equipment, mine is the same., only error mode ... y bootlop infinito error mode
error function NO : 8 (hifi image) error NO : 1 security verify failed

Related

[Completed] Bricked Huawei honor 3c, need help.

i have tried to restore a stock rom on my huawei honor 3c according to codelovers tutorial.
after few seconds this error message was shown: "S_FT_FORMAT=FAIL(4010)format flash error"
and from now on my phone doesn't boot.
i turn it on and all ~25 Seconds it vibrates. the display was dark. nothing happens.
You see the problem at this video at 8:49: https://www.youtube.com/watch?v=A3TmXtOA0IA
my phone reconnects allways.
i have tryed different hotkeys.
the hotkeys for the recover or upload mode does not work and my computer and laptop doesn't recognize my handy.
so i have no chance to use sp flash tool or any other software.
Has my huawei honor 3c a meta mode?
I have this version: V100R001CHNC00B627
Where can i find a stock rom with scatter?
is there any chance to rescue my phone?
thank you for help.
Merry Christmas
i have found this video https://www.youtube.com/watch?v=A3TmXtOA0IA and have updated my problem in the first post.
Hi,
Thanks for using XDA assist.
I see that you have already posted in the appropriate thread below:
Huawei HONOR 3C - FAQ , TIPS , TWEAKS , ROOT , KITKAT , UNBRICK ,MOD's,HARD BRICK...
Please ask all further questions there like what you have been doing. Because of this, I will close this thread.

[Completed] Huawei Phone Flashing Problem

Hello Guys,
I have a Huawei Ascend G730 (Model: HUAWEI G730-U10). No boot, No power up, No nothing, but when plugged in a computer, the computer detects it. It detects it as an MTK Device.
I tried flashing it with SP FLASH Tools (I used at least 5 roms), all failed. It's an SP FLASH Error (“BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) ).
I tried searching for results on the interwebs but to no avail.
I also saw this (https://forum.xda-developers.com/general/xda-assist/brom-error-sftenabledramfail-0xfc0-sp-t3378499). But that guy was met with a stock answer.
If anyone knows. Pls do help.
Thanks in Advance.
MujinFaye said:
Hello Guys,
I have a Huawei Ascend G730 (Model: HUAWEI G730-U10). No boot, No power up, No nothing, but when plugged in a computer, the computer detects it. It detects it as an MTK Device.
I tried flashing it with SP FLASH Tools (I used at least 5 roms), all failed. It's an SP FLASH Error (“BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) ).
I tried searching for results on the interwebs but to no avail.
I also saw this (https://forum.xda-developers.com/general/xda-assist/brom-error-sftenabledramfail-0xfc0-sp-t3378499). But that guy was met with a stock answer.
If anyone knows. Pls do help.
Thanks in Advance.
Click to expand...
Click to collapse
Greetings and welcome to assist. Unfortunately I can not find any answers to your problem but several users who have had this issue with mtk devices. It does sound like your memory chip has failed unfortunately but I do hope I'm wrong
Good Luck
Sawdoctor

pleaseee heeeeeeeelp

hi guys i tryied to intsal twrp recovery to mine huawei p9 lite and i used srk tool but when its supposed to start the twrp tool i got stock on your device has been unlocked and cant be trusted now i cannot rebbot mine phone i tryed almost every possible way to turn off but it automaticli turn on nd go to this point when it gets stuck help me please its maybe bcs my phone its bricked?
I don't remember p9 lite 2017 having twrp.
Anyway, your phone is officially f**cked!
The only way to unbrick it is using the dload method. Use google

MATE 9 Unbrick Solution - All questions answered.

Hello friends,
first of all thanks to everyone who supported me to fix my phone.( took me nearly 2 days)
this thread is for the people who bricked their phone while re-branding etcetra and to recover it in easy steps.
First make a note of your IMEI, Product ID, Sno. before proceeding.
1. Download hwota.zip from the link provided.( consist of all oeminfo needed )
https://drive.google.com/open?id=10fNOKja7MD0MOtlPVQH5S9kQ2czdn9dC
2.Unzip to your local c: drive
3.Now download stock firmware of your model or rebranded model number from this website https://www.gizrom.com/huawei-mate-9-stock-rom/
4.after downloading place the files in UNZIPPED FOLDER of HWOTA.ZIP in UPDATE FOLDER.
5.Rename the file as following " update.zip " , " update_all_hw.zip " , update_data_public.zip" . very imp plz.
6.Now open "update.bat"
7.Follow the instructions. You will need your device unlocking code in order to unlock bootloader and install twrp. SO MAKE A NOTE OF YOUR UNLOCK CODE AND SAVE IT.
8.For those your are having trouble finding SNo. and Product id can check from this website or can use HUAWEI PRODUCT ID Generator.
https://imei24.com/warranty_info/Huawei/861956030103197/
9.Now, after following instructions your device will reboot and start factory reset, if it fails then don't worry just hold "power + Vol up " to boot into recovery wipe partition then wipe data (factory reset ) then reboot.
DONE!
10.For those who are having trouble with MEID showing 000000000 don't worry its just for MHA-L09(single sim) showing it as dual sim....but sim works absolutely perfect.
11.For those who want to install oreo they follow same above HWOTA procedure, download official oreo from
https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/
That's it!!!!!
If you have any problem installing firmware, feel free to post in this thread, il try to reply asap..:good::good:
GOOD LUCK.
Shadymind said:
Hello friends,
first of all thanks to everyone who supported me to fix my phone.( took me nearly 2 days)
this thread is for the people who bricked their phone while re-branding etcetra and to recover it in easy steps.
First make a note of your IMEI, Product ID, Sno. before proceeding.
1. Download hwota.zip from the link provided.( consist of all oeminfo needed )
https://drive.google.com/open?id=10fNOKja7MD0MOtlPVQH5S9kQ2czdn9dC
2.Unzip to your local c: drive
3.Now download stock firmware of your model or rebranded model number from this website https://www.gizrom.com/huawei-mate-9-stock-rom/
4.after downloading place the files in UNZIPPED FOLDER of HWOTA.ZIP in UPDATE FOLDER.
5.Rename the file as following " update.zip " , " update_all_hw.zip " , update_data_public.zip" . very imp plz.
6.Now open "update.bat"
7.Follow the instructions. You will need your device unlocking code in order to unlock bootloader and install twrp. SO MAKE A NOTE OF YOUR UNLOCK CODE AND SAVE IT.
8.For those your are having trouble finding SNo. and Product id can check from this website or can use HUAWEI PRODUCT ID Generator.
https://imei24.com/warranty_info/Huawei/861956030103197/
9.Now, after following instructions your device will reboot and start factory reset, if it fails then don't worry just hold "power + Vol up " to boot into recovery wipe partition then wipe data (factory reset ) then reboot.
DONE!
10.For those who are having trouble with MEID showing 000000000 don't worry its just for MHA-L09(single sim) showing it as dual sim....but sim works absolutely perfect.
11.For those who want to install oreo they follow same above HWOTA procedure, download official oreo from
https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/
That's it!!!!!
If you have any problem installing firmware, feel free to post in this thread, il try to reply asap..:good::good:
GOOD LUCK.
Click to expand...
Click to collapse
mate 9 mha l29 mha c185b188
I tried to update to oreu the hwota method every thing OK but when phone restart 14% then instillation field!!
the I tried Re-branding method same ( every thing complete ) when phone restart instillation field
the when restart phone say error redownload update again ... no image error n 2
how to recover stuck room!!!
plz help
Abody.sy said:
mate 9 mha l29 mha c185b188
I tried to update to oreu the hwota method every thing OK but when phone restart 14% then instillation field!!
the I tried Re-branding method same ( every thing complete ) when phone restart instillation field
the when restart phone say error redownload update again ... no image error n 2
how to recover stuck room!!!
plz help
Click to expand...
Click to collapse
Could you post an image of the error screen?
phone still not booting
Hi I followed all steps on your thread but when my phone booted up it says "software install failed" And everytime I boot up after that it takes me to Erecovery,I tried wiping cache partition and factory reset from recovery mode but the factory reset fails at 5%,what am I doing wrong? My phone has been like this for 3 weeks
prenesin said:
Hi I followed all steps on your thread but when my phone booted up it says "software install failed" And everytime I boot up after that it takes me to Erecovery,I tried wiping cache partition and factory reset from recovery mode but the factory reset fails at 5%,what am I doing wrong? My phone has been like this for 3 weeks
Click to expand...
Click to collapse
Is your FRP unlocked?
You can check by booting to fastboot mode.
Download minimal adb & fastboot installer. Install.
Put phone in fastboot mode by plugging in USB to computer and then start using power + vol down.
If it says FRP unlock its pretty easy to fix.
If not you could try factory reset from recovery, then back to fastboot mode and check if FRP is gone.
Check this and reply back.
frp unlock?
ante0 said:
Is your FRP unlocked?
You can check by booting to fastboot mode.
Download minimal adb & fastboot installer. Install.
Put phone in fastboot mode by plugging in USB to computer and then start using power + vol down.
If it says FRP unlock its pretty easy to fix.
If not you could try factory reset from recovery, then back to fastboot mode and check if FRP is gone.
Check this and reply back.
Click to expand...
Click to collapse
I don't know about frp unlock,I only know bootloader unlock,I press the volume down button while doing that I connect it to the pc,my phone displays "phone unlocked"is that the same as frp?
prenesin said:
I don't know about frp unlock,I only know bootloader unlock,I press the volume down button while doing that I connect it to the pc,my phone displays "phone unlocked"is that the same as frp?
Click to expand...
Click to collapse
If it just says that, and not FRP locked, you can use this guide to rebrand and/or get a working firmware.
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
I realise it's the same hwota as OP posted but it's explained a little more in the release thread.
Does the bat give any errors?
phone still not booting
ante0 said:
f it just says that, and not FRP locked, you can use this guide to rebrand and/or get a working firmware.
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
I realise it's the same hwota as OP posted but it's explained a little more in the release thread.
Does the bat give any errors?
Click to expand...
Click to collapse
The bat does not give me any errors, everything works as explained but once it's time for the phone to boot up it says software install failed,than it boots to Erecovery,I even did it twice first was rebrand than same model update but the phone still doesn't boot up
Phone finally booted up almost good as new
Shadymind said:
Hello friends,
first of all thanks to everyone who supported me to fix my phone.( took me nearly 2 days)
this thread is for the people who bricked their phone while re-branding etcetra and to recover it in easy steps.
First make a note of your IMEI, Product ID, Sno. before proceeding.
1. Download hwota.zip from the link provided.( consist of all oeminfo needed )
https://drive.google.com/open?id=10fNOKja7MD0MOtlPVQH5S9kQ2czdn9dC
2.Unzip to your local c: drive
3.Now download stock firmware of your model or rebranded model number from this website https://www.gizrom.com/huawei-mate-9-stock-rom/
4.after downloading place the files in UNZIPPED FOLDER of HWOTA.ZIP in UPDATE FOLDER.
5.Rename the file as following " update.zip " , " update_all_hw.zip " , update_data_public.zip" . very imp plz.
6.Now open "update.bat"
7.Follow the instructions. You will need your device unlocking code in order to unlock bootloader and install twrp. SO MAKE A NOTE OF YOUR UNLOCK CODE AND SAVE IT.
8.For those your are having trouble finding SNo. and Product id can check from this website or can use HUAWEI PRODUCT ID Generator.
https://imei24.com/warranty_info/Huawei/861956030103197/
9.Now, after following instructions your device will reboot and start factory reset, if it fails then don't worry just hold "power + Vol up " to boot into recovery wipe partition then wipe data (factory reset ) then reboot.
DONE!
10.For those who are having trouble with MEID showing 000000000 don't worry its just for MHA-L09(single sim) showing it as dual sim....but sim works absolutely perfect.
11.For those who want to install oreo they follow same above HWOTA procedure, download official oreo from
https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/
That's it!!!!!
If you have any problem installing firmware, feel free to post in this thread, il try to reply asap..:good::good:
GOOD LUCK.
Click to expand...
Click to collapse
Thanks to this post my Huawei mate 9 is finally working, tried restoring it for the past 3 weeks but nothing, this was the only method that worked for me, everything on the phone works perfectly except that my single Sim Sim now says it's a dual Sim(MEID showing a lot of zeros) , but I'm just glad it's working after all this time, thank you to everyone who helped
Hi
Can you help me please ?
https://forum.xda-developers.com/mate-9/help/huawei-mate-9-mha-l09-mha-l29-t3738376
Thank you
Hi
Please can you tell to me why when HWOTA wait my phone in TWRP mode do not detect my phone ? Thank you
Please help
My mate 9 had a security patch dated in April last year. I was trying to update it to a recent patch. I tried a couple OTA passages on FF, but none of them could finish and left me with a starting screen saying your phone failed for verification. So I tried a full OTA package ( don't remember the number more, but it's a package dated Jan 7th I think) that passed the access test in FF.
The whole process finished and screen showed update successful. But all of a sudden, instead of normal restart, the phone started a downgrade process and tried to install B567 back to my phone. Then it kept going to erecovery, but always showed recovery failed after downloading a package from server and trying to install it.
I don't want to void any warranty, only trying to reset it back to original state. Please help.
Shadymind said:
Hello friends,
first of all thanks to everyone who supported me to fix my phone.( took me nearly 2 days)
this thread is for the people who bricked their phone while re-branding etcetra and to recover it in easy steps.
First make a note of your IMEI, Product ID, Sno. before proceeding.
1. Download hwota.zip from the link provided.( consist of all oeminfo needed )
https://drive.google.com/open?id=10fNOKja7MD0MOtlPVQH5S9kQ2czdn9dC
2.Unzip to your local c: drive
3.Now download stock firmware of your model or rebranded model number from this website https://www.gizrom.com/huawei-mate-9-stock-rom/
4.after downloading place the files in UNZIPPED FOLDER of HWOTA.ZIP in UPDATE FOLDER.
5.Rename the file as following " update.zip " , " update_all_hw.zip " , update_data_public.zip" . very imp plz.
6.Now open "update.bat"
7.Follow the instructions. You will need your device unlocking code in order to unlock bootloader and install twrp. SO MAKE A NOTE OF YOUR UNLOCK CODE AND SAVE IT.
8.For those your are having trouble finding SNo. and Product id can check from this website or can use HUAWEI PRODUCT ID Generator.
https://imei24.com/warranty_info/Huawei/861956030103197/
9.Now, after following instructions your device will reboot and start factory reset, if it fails then don't worry just hold "power + Vol up " to boot into recovery wipe partition then wipe data (factory reset ) then reboot.
DONE!
10.For those who are having trouble with MEID showing 000000000 don't worry its just for MHA-L09(single sim) showing it as dual sim....but sim works absolutely perfect.
11.For those who want to install oreo they follow same above HWOTA procedure, download official oreo from
https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/
That's it!!!!!
If you have any problem installing firmware, feel free to post in this thread, il try to reply asap..:good::good:
GOOD LUCK.
Click to expand...
Click to collapse
hi thank you for the simplified process my question is i have the unlock code but no oem unlock permission and i am unable to move any further is there any solution for it or i am mistaking somewhere
Abody.sy said:
mate 9 mha l29 mha c185b188
I tried to update to oreu the hwota method every thing OK but when phone restart 14% then instillation field!!
the I tried Re-branding method same ( every thing complete ) when phone restart instillation field
the when restart phone say error redownload update again ... no image error n 2
how to recover stuck room!!!
plz help
Click to expand...
Click to collapse
Hi
Have you check the oem info which you had flashed using HWOTA?
Flash the correct oem info for your device and follow instructions in case if it failed again post screenshot of the error.
awais_666 said:
hi thank you for the simplified process my question is i have the unlock code but no oem unlock permission and i am unable to move any further is there any solution for it or i am mistaking somewhere
Click to expand...
Click to collapse
Hi
Apology for late reply, if you got the unlock code try unlocking bootloader using hwota, and continue the process
BUT before proceeding make sure you noted correct unlock code,double check your imei, sno etc if something missing in your unlock code.
Shadymind said:
Hi
Apology for late reply, if you got the unlock code try unlocking bootloader using hwota, and continue the process
BUT before proceeding make sure you noted correct unlock code,double check your imei, sno etc if something missing in your unlock code.
Click to expand...
Click to collapse
no worries dear really appreciate that you are trying to help when i use HWOTA first thing it asks to unlock put the code i have the right code but when i try it using HWOTA it doesnt flash as normally we go to usb debugging and enable it and also click oem unlock to allow device to be unlocked those options are not enabled that is why i cant unlock bootloader
awais_666 said:
no worries dear really appreciate that you are trying to help when i use HWOTA first thing it asks to unlock put the code i have the right code but when i try it using HWOTA it doesnt flash as normally we go to usb debugging and enable it and also click oem unlock to allow device to be unlocked those options are not enabled that is why i cant unlock bootloader
Click to expand...
Click to collapse
Hi,
If it is giving incorrect unlock code then confirm your imei, product id, serial number, get the unlock code from huawei developer page and save it as notepad and try again with hwota....check imei on product box , for some reason after rebranding device gives you some different imei.
Shadymind said:
Hi,
If it is giving incorrect unlock code then confirm your imei, product id, serial number, get the unlock code from huawei developer page and save it as notepad and try again with hwota....check imei on product box , for some reason after rebranding device gives you some different imei.
Click to expand...
Click to collapse
the code is not incorrect and HWOTA doesnt say its incorrect it gets failed to write which is normal for every phone if they dont have it oem unlock enabled from developer options unless there is any other way around
needing file location clarification
QUOTE: 1. Download hwota.zip from the link provided.( consist of all oeminfo needed )
2.Unzip to your local c: drive
3.Now download stock firmware of your model or rebranded
4.after downloading place the files in UNZIPPED FOLDER of HWOTA.ZIP in UPDATE FOLDER.
5.Rename the file as following " update.zip " , " update_all_hw.zip " , update_data_public.zip" . very imp plz.
6.Now open "update.bat"
* I have downloaded ant unzipped HWOTA on pc desktop
* I have downloaded the 3 additional zip files as well.
Do these files go directly into the unzipped HWOTA folder? (you mention UPDATE folder?)
* Do these 3 files stay zipped?
* It doesn't seem to allow me to change the file names
* where is the "update.bat" file to open?
Thank you so very much
Shadymind said:
Hi
Have you check the oem info which you had flashed using HWOTA?
Flash the correct oem info for your device and follow instructions in case if it failed again post screenshot of the error.
Click to expand...
Click to collapse
İ sended the phone to phone engineering shope
the thone successfully start by unknown way for my...
but it installed NRD90M KEYS TEST build nu. android version 7
and some of functions doesn't work
like file manager and theme and Bluetooth...
how to reinstall full room??

Func NO : 10 (boot image) and Error NO : 2 (load failed!) pplleeaaasseee help me.

Hay guys i'm from South Africa and don't know a lot of people that works with there phone's the way i do over here not a lot of people here wants to educate themselves to explore deeper in their phones,I'm a bit of a noob guys i was flashing my Huawei mate 8 NXT-L29 im not sure what stock Rom was installed but the emui was 4.0 and rooted,i flashed the recovery 1(firmware flash thru EXTsdcard) and recovery 2(erecovery ?)with custom recovery's that was meant to be custom for the mate 8 but i guess for a different emui and i flashed the BOOT.IMG with a custom BOOT.IMG,now my device is stuck in RESCUE MODE...I got it to boot up so it doesn't display the error-Func NO : 10 (boot image) and Error NO : 2 (load failed!) by restarting the device and plugin in usb cable while holding volume down button but then it shows in Green Device Locked ....i'm not good at all with this guys i used to have a Samsung J5 that was much easier to handle while Rooting so please any solution on this i would be so great-full...i don't even know how adb works,i tried to find info on internet but got nothing please help guys
MOnomono456 said:
Hay guys i'm from South Africa and don't know a lot of people that works with there phone's the way i do over here not a lot of people here wants to educate themselves to explore deeper in their phones,I'm a bit of a noob guys i was flashing my Huawei mate 8 NXT-L29 im not sure what stock Rom was installed but the emui was 4.0 and rooted,i flashed the recovery 1(firmware flash thru EXTsdcard) and recovery 2(erecovery ?)with custom recovery's that was meant to be custom for the mate 8 but i guess for a different emui and i flashed the BOOT.IMG with a custom BOOT.IMG,now my device is stuck in RESCUE MODE...I got it to boot up so it doesn't display the error-Func NO : 10 (boot image) and Error NO : 2 (load failed!) by restarting the device and plugin in usb cable while holding volume down button but then it shows in Green Device Locked ....i'm not good at all with this guys i used to have a Samsung J5 that was much easier to handle while Rooting so please any solution on this i would be so great-full...i don't even know how adb works,i tried to find info on internet but got nothing please help guys
Click to expand...
Click to collapse
If you installed a boot that was not for your phone. you've ruined broken memory
elcoya06 said:
If you installed a boot that was not for your phone. you've ruined broken memory
Click to expand...
Click to collapse
so it cant be fixed???

Categories

Resources