Database Info

[Completed] Lenovo VIBE P1 bricked. Please help

Hello. I have a new Lenovo VIBE P1 chinese edition (3GB Ram and 16GB internal memory).
When arrived was installed a multilingual ROM. Some messages were in chinese, but it works. A message appeared that there was an update for that ROM. I made the update (the mobile made all automatically without connecting to the PC). When the update finished I only had chinese and english, not multilingual, and the playstore dissapeared. If anybody have this same mobile whith multilingual ROM be careful with rom automatic updates, the new ROM don't work well and you loose multilingual.
I tried to install the older ROM using QPST, but sure I do something wrong. Now the mobile phone is bricked without activity. Impossible to open the recovery, it does nothing and the screen is always off, like dead.
Reading some post I tried to unbrick it, but the only thing that I can get is to recognize the mobile in download mode when I plug to the PC with the eMMC download opened or the QFIL. When I try to download a new ROM or recovery nothing works, it says "Switch to EDL fail".
If anybody knows a way to flash a recovery and a ROM to unbrick the mobile, please tell me ideas. I don't know what more I can do. Thanks for your help.

yayator said:
Hello. I have a new Lenovo VIBE P1 chinese edition (3GB Ram and 16GB internal memory).
When arrived was installed a multilingual ROM. Some messages were in chinese, but it works. A message appeared that there was an update for that ROM. I made the update (the mobile made all automatically without connecting to the PC). When the update finished I only had chinese and english, not multilingual, and the playstore dissapeared. If anybody have this same mobile whith multilingual ROM be careful with rom automatic updates, the new ROM don't work well and you loose multilingual.
I tried to install the older ROM using QPST, but sure I do something wrong. Now the mobile phone is bricked without activity. Impossible to open the recovery, it does nothing and the screen is always off, like dead.
Reading some post I tried to unbrick it, but the only thing that I can get is to recognize the mobile in download mode when I plug to the PC with the eMMC download opened or the QFIL. When I try to download a new ROM or recovery nothing works, it says "Switch to EDL fail".
If anybody knows a way to flash a recovery and a ROM to unbrick the mobile, please tell me ideas. I don't know what more I can do. Thanks for your help.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
You can post your query in Vibe P1 Discussion Thread.Experts there may be able to help you
___
v7
XDA Assist

Thanks. I do it now

[Completed] Huawei Y6 SCL_L01 Softbricked?

Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.

Asdforcer said:
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Click to expand...
Click to collapse
Hi, Thanks for using XDA assist.
It looks like there is no dedicated forum for your device, however
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck

[Completed] Huawei Phone Flashing Problem

Hello Guys,
I have a Huawei Ascend G730 (Model: HUAWEI G730-U10). No boot, No power up, No nothing, but when plugged in a computer, the computer detects it. It detects it as an MTK Device.
I tried flashing it with SP FLASH Tools (I used at least 5 roms), all failed. It's an SP FLASH Error (“BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) ).
I tried searching for results on the interwebs but to no avail.
I also saw this (https://forum.xda-developers.com/general/xda-assist/brom-error-sftenabledramfail-0xfc0-sp-t3378499). But that guy was met with a stock answer.
If anyone knows. Pls do help.
Thanks in Advance.

MujinFaye said:
Hello Guys,
I have a Huawei Ascend G730 (Model: HUAWEI G730-U10). No boot, No power up, No nothing, but when plugged in a computer, the computer detects it. It detects it as an MTK Device.
I tried flashing it with SP FLASH Tools (I used at least 5 roms), all failed. It's an SP FLASH Error (“BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) ).
I tried searching for results on the interwebs but to no avail.
I also saw this (https://forum.xda-developers.com/general/xda-assist/brom-error-sftenabledramfail-0xfc0-sp-t3378499). But that guy was met with a stock answer.
If anyone knows. Pls do help.
Thanks in Advance.
Click to expand...
Click to collapse
Greetings and welcome to assist. Unfortunately I can not find any answers to your problem but several users who have had this issue with mtk devices. It does sound like your memory chip has failed unfortunately but I do hope I'm wrong
Good Luck
Sawdoctor

"DEVICES IS CORRUPT/STUCK ON FASTBOOT"

hi guys i'm having problem with my nubia red magic 3.. so what happen is i updated my phone to android 11 and then i went back to android 9 and got bricked.
so tried all these solution here:
"device is corrupt" solution guide for Nubia Red Magic 3 / 3S
Sharing this guide seems quite late but since xda red magic threads taught me a lot about the rooting and corrupted stuffs, I think it would not hurt to return something back to this community. This is my attempt to compile people's responses...
forum.xda-developers.com
&
红魔3安卓11回退安卓10教程-红魔3/3S-努比亚/红魔社区 - 手机版
&
[Tool] Nubia Red Magic 3 Unbirck Tool
This tool can help you to unbrick the Red Magic 3. It will restore the phone to the oldest version, you need to update the system software by yourself. This tool is based on Qualcomm firehose protocol, so it should fix all kinds of software...
forum.xda-developers.com
so i followed all of these steps. some got my device back to corrupt and some got my device stuck in fastboot and when i try to enter recovery it brings me back to fastboot.
anyone other solution?
i also tried converting system.img and flashed it didnt work also..
please help

i'm having the same problem with my nubia red magic 3 . Did you fix it? pls help me!
Sorry for my bad english!

[CLOSED] Help! My redmi note 8 pro is Hard bricked and i cant get it to work!

Hello.
Today, after i flashed a rom using some weird ass chinese twrp on my redmi note 8 pro (which is global btw) the phone just would not turn on.
I have searched all day for a fix, but nothing seems to work. I discovered that while pressing the volume up button my phone appears as a mtk com port but after a few seconds the phone does not show up anymore in device manager. I tried using sp flash tool but it just wont detect my device (even when i press volume up) i tried also bypassing the mtk authentication but i have the same problem, the tool just wont detect my phone. Any help is really appreciated!

WhyisAethertaken said:
Hello.
Today, after i flashed a rom using some weird ass chinese twrp on my redmi note 8 pro (which is global btw) the phone just would not turn on.
I have searched all day for a fix, but nothing seems to work. I discovered that while pressing the volume up button my phone appears as a mtk com port but after a few seconds the phone does not show up anymore in device manager. I tried using sp flash tool but it just wont detect my device (even when i press volume up) i tried also bypassing the mtk authentication but i have the same problem, the tool just wont detect my phone. Any help is really appreciated!
Click to expand...
Click to collapse
@WhyisAethertaken Thread closed as duplicate of
Need help urgently! Hard bricked redmi note 8 pro!
Hello. Today, after i flashed a rom using some weird ass chinese twrp on my redmi note 8 pro (which is global btw) the phone just would not turn on. I have searched all day for a fix, but nothing seems to work. I discovered that while pressing...
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5 and post only ONCE! Thanks for your cooperation.
This is the second and very last time that I remind you; first time was here:
[CLOSED]Poco x3 nfc not booting after flashing magisk
Yesterday i flashed magisk (using the new method of course) and when i tried to boot it would stop on the miui boot screen. I can go into fastboot and recovery but i dont have twrp installed. If anybody could help i would be grateful.
forum.xda-developers.com
Read my message as a friendly warning.
Regards
Oswald Boelcke
Senior Moderator