Hello friends,
first of all thanks to everyone who supported me to fix my phone.( took me nearly 2 days)
this thread is for the people who bricked their phone while re-branding etcetra and to recover it in easy steps.
First make a note of your IMEI, Product ID, Sno. before proceeding.
1. Download hwota.zip from the link provided.( consist of all oeminfo needed )
https://drive.google.com/open?id=10fNOKja7MD0MOtlPVQH5S9kQ2czdn9dC
2.Unzip to your local c: drive
3.Now download stock firmware of your model or rebranded model number from this website https://www.gizrom.com/huawei-mate-9-stock-rom/
4.after downloading place the files in UNZIPPED FOLDER of HWOTA.ZIP in UPDATE FOLDER.
5.Rename the file as following " update.zip " , " update_all_hw.zip " , update_data_public.zip" . very imp plz.
6.Now open "update.bat"
7.Follow the instructions. You will need your device unlocking code in order to unlock bootloader and install twrp. SO MAKE A NOTE OF YOUR UNLOCK CODE AND SAVE IT.
8.For those your are having trouble finding SNo. and Product id can check from this website or can use HUAWEI PRODUCT ID Generator.
https://imei24.com/warranty_info/Huawei/861956030103197/
9.Now, after following instructions your device will reboot and start factory reset, if it fails then don't worry just hold "power + Vol up " to boot into recovery wipe partition then wipe data (factory reset ) then reboot.
DONE!
10.For those who are having trouble with MEID showing 000000000 don't worry its just for MHA-L09(single sim) showing it as dual sim....but sim works absolutely perfect.
11.For those who want to install oreo they follow same above HWOTA procedure, download official oreo from
https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/
That's it!!!!!
If you have any problem installing firmware, feel free to post in this thread, il try to reply asap..:good::good:
GOOD LUCK.
Shadymind said:
Hello friends,
first of all thanks to everyone who supported me to fix my phone.( took me nearly 2 days)
this thread is for the people who bricked their phone while re-branding etcetra and to recover it in easy steps.
First make a note of your IMEI, Product ID, Sno. before proceeding.
1. Download hwota.zip from the link provided.( consist of all oeminfo needed )
https://drive.google.com/open?id=10fNOKja7MD0MOtlPVQH5S9kQ2czdn9dC
2.Unzip to your local c: drive
3.Now download stock firmware of your model or rebranded model number from this website https://www.gizrom.com/huawei-mate-9-stock-rom/
4.after downloading place the files in UNZIPPED FOLDER of HWOTA.ZIP in UPDATE FOLDER.
5.Rename the file as following " update.zip " , " update_all_hw.zip " , update_data_public.zip" . very imp plz.
6.Now open "update.bat"
7.Follow the instructions. You will need your device unlocking code in order to unlock bootloader and install twrp. SO MAKE A NOTE OF YOUR UNLOCK CODE AND SAVE IT.
8.For those your are having trouble finding SNo. and Product id can check from this website or can use HUAWEI PRODUCT ID Generator.
https://imei24.com/warranty_info/Huawei/861956030103197/
9.Now, after following instructions your device will reboot and start factory reset, if it fails then don't worry just hold "power + Vol up " to boot into recovery wipe partition then wipe data (factory reset ) then reboot.
DONE!
10.For those who are having trouble with MEID showing 000000000 don't worry its just for MHA-L09(single sim) showing it as dual sim....but sim works absolutely perfect.
11.For those who want to install oreo they follow same above HWOTA procedure, download official oreo from
https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/
That's it!!!!!
If you have any problem installing firmware, feel free to post in this thread, il try to reply asap..:good::good:
GOOD LUCK.
Click to expand...
Click to collapse
mate 9 mha l29 mha c185b188
I tried to update to oreu the hwota method every thing OK but when phone restart 14% then instillation field!!
the I tried Re-branding method same ( every thing complete ) when phone restart instillation field
the when restart phone say error redownload update again ... no image error n 2
how to recover stuck room!!!
plz help
Abody.sy said:
mate 9 mha l29 mha c185b188
I tried to update to oreu the hwota method every thing OK but when phone restart 14% then instillation field!!
the I tried Re-branding method same ( every thing complete ) when phone restart instillation field
the when restart phone say error redownload update again ... no image error n 2
how to recover stuck room!!!
plz help
Click to expand...
Click to collapse
Could you post an image of the error screen?
phone still not booting
Hi I followed all steps on your thread but when my phone booted up it says "software install failed" And everytime I boot up after that it takes me to Erecovery,I tried wiping cache partition and factory reset from recovery mode but the factory reset fails at 5%,what am I doing wrong? My phone has been like this for 3 weeks
prenesin said:
Hi I followed all steps on your thread but when my phone booted up it says "software install failed" And everytime I boot up after that it takes me to Erecovery,I tried wiping cache partition and factory reset from recovery mode but the factory reset fails at 5%,what am I doing wrong? My phone has been like this for 3 weeks
Click to expand...
Click to collapse
Is your FRP unlocked?
You can check by booting to fastboot mode.
Download minimal adb & fastboot installer. Install.
Put phone in fastboot mode by plugging in USB to computer and then start using power + vol down.
If it says FRP unlock its pretty easy to fix.
If not you could try factory reset from recovery, then back to fastboot mode and check if FRP is gone.
Check this and reply back.
frp unlock?
ante0 said:
Is your FRP unlocked?
You can check by booting to fastboot mode.
Download minimal adb & fastboot installer. Install.
Put phone in fastboot mode by plugging in USB to computer and then start using power + vol down.
If it says FRP unlock its pretty easy to fix.
If not you could try factory reset from recovery, then back to fastboot mode and check if FRP is gone.
Check this and reply back.
Click to expand...
Click to collapse
I don't know about frp unlock,I only know bootloader unlock,I press the volume down button while doing that I connect it to the pc,my phone displays "phone unlocked"is that the same as frp?
prenesin said:
I don't know about frp unlock,I only know bootloader unlock,I press the volume down button while doing that I connect it to the pc,my phone displays "phone unlocked"is that the same as frp?
Click to expand...
Click to collapse
If it just says that, and not FRP locked, you can use this guide to rebrand and/or get a working firmware.
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
I realise it's the same hwota as OP posted but it's explained a little more in the release thread.
Does the bat give any errors?
phone still not booting
ante0 said:
f it just says that, and not FRP locked, you can use this guide to rebrand and/or get a working firmware.
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
I realise it's the same hwota as OP posted but it's explained a little more in the release thread.
Does the bat give any errors?
Click to expand...
Click to collapse
The bat does not give me any errors, everything works as explained but once it's time for the phone to boot up it says software install failed,than it boots to Erecovery,I even did it twice first was rebrand than same model update but the phone still doesn't boot up
Phone finally booted up almost good as new
Shadymind said:
Hello friends,
first of all thanks to everyone who supported me to fix my phone.( took me nearly 2 days)
this thread is for the people who bricked their phone while re-branding etcetra and to recover it in easy steps.
First make a note of your IMEI, Product ID, Sno. before proceeding.
1. Download hwota.zip from the link provided.( consist of all oeminfo needed )
https://drive.google.com/open?id=10fNOKja7MD0MOtlPVQH5S9kQ2czdn9dC
2.Unzip to your local c: drive
3.Now download stock firmware of your model or rebranded model number from this website https://www.gizrom.com/huawei-mate-9-stock-rom/
4.after downloading place the files in UNZIPPED FOLDER of HWOTA.ZIP in UPDATE FOLDER.
5.Rename the file as following " update.zip " , " update_all_hw.zip " , update_data_public.zip" . very imp plz.
6.Now open "update.bat"
7.Follow the instructions. You will need your device unlocking code in order to unlock bootloader and install twrp. SO MAKE A NOTE OF YOUR UNLOCK CODE AND SAVE IT.
8.For those your are having trouble finding SNo. and Product id can check from this website or can use HUAWEI PRODUCT ID Generator.
https://imei24.com/warranty_info/Huawei/861956030103197/
9.Now, after following instructions your device will reboot and start factory reset, if it fails then don't worry just hold "power + Vol up " to boot into recovery wipe partition then wipe data (factory reset ) then reboot.
DONE!
10.For those who are having trouble with MEID showing 000000000 don't worry its just for MHA-L09(single sim) showing it as dual sim....but sim works absolutely perfect.
11.For those who want to install oreo they follow same above HWOTA procedure, download official oreo from
https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/
That's it!!!!!
If you have any problem installing firmware, feel free to post in this thread, il try to reply asap..:good::good:
GOOD LUCK.
Click to expand...
Click to collapse
Thanks to this post my Huawei mate 9 is finally working, tried restoring it for the past 3 weeks but nothing, this was the only method that worked for me, everything on the phone works perfectly except that my single Sim Sim now says it's a dual Sim(MEID showing a lot of zeros) , but I'm just glad it's working after all this time, thank you to everyone who helped
Hi
Can you help me please ?
https://forum.xda-developers.com/mate-9/help/huawei-mate-9-mha-l09-mha-l29-t3738376
Thank you
Hi
Please can you tell to me why when HWOTA wait my phone in TWRP mode do not detect my phone ? Thank you
Please help
My mate 9 had a security patch dated in April last year. I was trying to update it to a recent patch. I tried a couple OTA passages on FF, but none of them could finish and left me with a starting screen saying your phone failed for verification. So I tried a full OTA package ( don't remember the number more, but it's a package dated Jan 7th I think) that passed the access test in FF.
The whole process finished and screen showed update successful. But all of a sudden, instead of normal restart, the phone started a downgrade process and tried to install B567 back to my phone. Then it kept going to erecovery, but always showed recovery failed after downloading a package from server and trying to install it.
I don't want to void any warranty, only trying to reset it back to original state. Please help.
Shadymind said:
Hello friends,
first of all thanks to everyone who supported me to fix my phone.( took me nearly 2 days)
this thread is for the people who bricked their phone while re-branding etcetra and to recover it in easy steps.
First make a note of your IMEI, Product ID, Sno. before proceeding.
1. Download hwota.zip from the link provided.( consist of all oeminfo needed )
https://drive.google.com/open?id=10fNOKja7MD0MOtlPVQH5S9kQ2czdn9dC
2.Unzip to your local c: drive
3.Now download stock firmware of your model or rebranded model number from this website https://www.gizrom.com/huawei-mate-9-stock-rom/
4.after downloading place the files in UNZIPPED FOLDER of HWOTA.ZIP in UPDATE FOLDER.
5.Rename the file as following " update.zip " , " update_all_hw.zip " , update_data_public.zip" . very imp plz.
6.Now open "update.bat"
7.Follow the instructions. You will need your device unlocking code in order to unlock bootloader and install twrp. SO MAKE A NOTE OF YOUR UNLOCK CODE AND SAVE IT.
8.For those your are having trouble finding SNo. and Product id can check from this website or can use HUAWEI PRODUCT ID Generator.
https://imei24.com/warranty_info/Huawei/861956030103197/
9.Now, after following instructions your device will reboot and start factory reset, if it fails then don't worry just hold "power + Vol up " to boot into recovery wipe partition then wipe data (factory reset ) then reboot.
DONE!
10.For those who are having trouble with MEID showing 000000000 don't worry its just for MHA-L09(single sim) showing it as dual sim....but sim works absolutely perfect.
11.For those who want to install oreo they follow same above HWOTA procedure, download official oreo from
https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/
That's it!!!!!
If you have any problem installing firmware, feel free to post in this thread, il try to reply asap..:good::good:
GOOD LUCK.
Click to expand...
Click to collapse
hi thank you for the simplified process my question is i have the unlock code but no oem unlock permission and i am unable to move any further is there any solution for it or i am mistaking somewhere
Abody.sy said:
mate 9 mha l29 mha c185b188
I tried to update to oreu the hwota method every thing OK but when phone restart 14% then instillation field!!
the I tried Re-branding method same ( every thing complete ) when phone restart instillation field
the when restart phone say error redownload update again ... no image error n 2
how to recover stuck room!!!
plz help
Click to expand...
Click to collapse
Hi
Have you check the oem info which you had flashed using HWOTA?
Flash the correct oem info for your device and follow instructions in case if it failed again post screenshot of the error.
awais_666 said:
hi thank you for the simplified process my question is i have the unlock code but no oem unlock permission and i am unable to move any further is there any solution for it or i am mistaking somewhere
Click to expand...
Click to collapse
Hi
Apology for late reply, if you got the unlock code try unlocking bootloader using hwota, and continue the process
BUT before proceeding make sure you noted correct unlock code,double check your imei, sno etc if something missing in your unlock code.
Shadymind said:
Hi
Apology for late reply, if you got the unlock code try unlocking bootloader using hwota, and continue the process
BUT before proceeding make sure you noted correct unlock code,double check your imei, sno etc if something missing in your unlock code.
Click to expand...
Click to collapse
no worries dear really appreciate that you are trying to help when i use HWOTA first thing it asks to unlock put the code i have the right code but when i try it using HWOTA it doesnt flash as normally we go to usb debugging and enable it and also click oem unlock to allow device to be unlocked those options are not enabled that is why i cant unlock bootloader
awais_666 said:
no worries dear really appreciate that you are trying to help when i use HWOTA first thing it asks to unlock put the code i have the right code but when i try it using HWOTA it doesnt flash as normally we go to usb debugging and enable it and also click oem unlock to allow device to be unlocked those options are not enabled that is why i cant unlock bootloader
Click to expand...
Click to collapse
Hi,
If it is giving incorrect unlock code then confirm your imei, product id, serial number, get the unlock code from huawei developer page and save it as notepad and try again with hwota....check imei on product box , for some reason after rebranding device gives you some different imei.
Shadymind said:
Hi,
If it is giving incorrect unlock code then confirm your imei, product id, serial number, get the unlock code from huawei developer page and save it as notepad and try again with hwota....check imei on product box , for some reason after rebranding device gives you some different imei.
Click to expand...
Click to collapse
the code is not incorrect and HWOTA doesnt say its incorrect it gets failed to write which is normal for every phone if they dont have it oem unlock enabled from developer options unless there is any other way around
needing file location clarification
QUOTE: 1. Download hwota.zip from the link provided.( consist of all oeminfo needed )
2.Unzip to your local c: drive
3.Now download stock firmware of your model or rebranded
4.after downloading place the files in UNZIPPED FOLDER of HWOTA.ZIP in UPDATE FOLDER.
5.Rename the file as following " update.zip " , " update_all_hw.zip " , update_data_public.zip" . very imp plz.
6.Now open "update.bat"
* I have downloaded ant unzipped HWOTA on pc desktop
* I have downloaded the 3 additional zip files as well.
Do these files go directly into the unzipped HWOTA folder? (you mention UPDATE folder?)
* Do these 3 files stay zipped?
* It doesn't seem to allow me to change the file names
* where is the "update.bat" file to open?
Thank you so very much
Shadymind said:
Hi
Have you check the oem info which you had flashed using HWOTA?
Flash the correct oem info for your device and follow instructions in case if it failed again post screenshot of the error.
Click to expand...
Click to collapse
İ sended the phone to phone engineering shope
the thone successfully start by unknown way for my...
but it installed NRD90M KEYS TEST build nu. android version 7
and some of functions doesn't work
like file manager and theme and Bluetooth...
how to reinstall full room??
Related
Hi,
I have root my phone. disabled some unnecessary apps, but i decided to factory reset, but when i open the phone top and bottom buttons were gone, no notifications. Now I cant do anything. How can i restore the whole OS back?
I have bring the stock recovery back but now i stuck!
now i cannot enter to bootlader
Trying with adb but it says not authorized. Authorize notify cant appear on screen i think its because huawei home not work properly.
And I cant even install anything from google play or local apk.
I think its bricked please help...
http://forum.xda-developers.com/showthread.php?t=3075332
did you try this?
Sent from my HUAWEI MT7-TL10
Easy Computer said:
http://forum.xda-developers.com/showthread.php?t=3075332
did you try this?
Sent from my HUAWEI MT7-TL10
Click to expand...
Click to collapse
Hi,
I have tried almost every steps except latest version update, because there is no latest version on Huawei Turkish website, latest one shows B133 but mine was B137, so it gives an error while starting the update from dload folder.
Hisuite doesnt recognize the phone.
Now I am downloading Huawei MT7-L09 CEE&Nordic European Channel V100R001C00B137SP03 Android 4.4.2 EMUI 3.0 This is not Turkish version but i hope I can install it with 3 button update procedure...
No luck...
It gave me "software install failed" error...
Now im scared to factory reset my phone... I hope you get to find a solution bro.
EzerchE said:
No luck...
It gave me "software install failed" error...
Click to expand...
Click to collapse
Easy Computer said:
Now im scared to factory reset my phone... I hope you get to find a solution bro.
Click to expand...
Click to collapse
Hi, i find a solution,
actually i find a way to enter fastboot mode without inside of android os.
connect mate 7 to pc, while its connected press 3 buttons and hold,
it will open in recovery mode adb,
then command: fastboot bootloader
you are in fastboot.
But now i bricked it so bad mistakenly.
Its enters looped rescue mode but it doesnt connects to fastboot.
But i have find a solution for it too.
While its in bricked rescue mode press and hold Volume down + power buttons,
it will enters to fastboot mode.
Now i am trying to flash files to repair rescue mode but i still didnt find how to repair it...
If you are in fadtboot mode you should be able to flash the stock recovery (the correct one!!!) via adb command. Then try 3buttons procedure. Please be carefull with the sd card, since most of them don't work in 3b mode. Try several btand of SD.
i hope you get it to work again. good luck bro :good:
EzerchE said:
Hi, i find a solution,
actually i find a way to enter fastboot mode without inside of android os.
connect mate 7 to pc, while its connected press 3 buttons and hold,
it will open in recovery mode adb,
then command: fastboot bootloader
you are in fastboot.
But now i bricked it so bad mistakenly.
Its enters looped rescue mode but it doesnt connects to fastboot.
But i have find a solution for it too.
While its in bricked rescue mode press and hold Volume down + power buttons,
it will enters to fastboot mode.
Now i am trying to flash files to repair rescue mode but i still didnt find how to repair it...
Click to expand...
Click to collapse
tuddu said:
If you are in fadtboot mode you should be able to flash the stock recovery (the correct one!!!) via adb command. Then try 3buttons procedure. Please be carefull with the sd card, since most of them don't work in 3b mode. Try several btand of SD.
Click to expand...
Click to collapse
Hi,
I flashed stock: boot.img, recovery.img, custom.img, system.img and cache.img inside from fastboot mode but no luck...
It gives this error immediately after reboot:
Error!
Func NO: 12 (FUNC_LOAD_IOM3)
Error NO: 1
And can't enter 3 buttons upgrade procedure
I think some system files are missing and it doesnt boot or enter to recovery mode...
Its so sad there is not so much users and professional support about Mate 7. I find the ways to enter bootlader without entering the OS by myself.
But its so easy to brick the phone so all users be very careful when flashing recovery and wiping the phone. As for as i know there is no way to fix my problem even by Huawei technical services. (A guy from another forum, sent his bricked Mate7, they returned the money to him he tolds..)
I could'nt repair the phone so I returned it to seller, thanks for the seller's return policy 14 day no rules accepts return. So I sent my device to seller and returned my money back. I dont know which device should I get.
Good luck all.
EzerchE said:
Its so sad there is not so much users and professional support about Mate 7. I find the ways to enter bootlader without entering the OS by myself.
But its so easy to brick the phone so all users be very careful when flashing recovery and wiping the phone. As for as i know there is no way to fix my problem even by Huawei technical services. (A guy from another forum, sent his bricked Mate7, they returned the money to him he tolds..)
I could'nt repair the phone so I returned it to seller, thanks for the seller's return policy 14 day no rules accepts return. So I sent my device to seller and returned my money back. I dont know which device should I get.
Good luck all.
Click to expand...
Click to collapse
Hi Ezerche. I'm so sorry your phone got bricked and you couldn't repair... I don't know how to root and I couldn't help you. What did you do wrong? I saw on this forum other users who had successfully rooted mate 7.
Now I think I will never root this phone, my 30 days return policy has expired. SO there was no way to repair your phone?
I found your problem on an chinese forum: https://translate.google.ro/transla....vmall.com/thread-3432260-1-1.html&edit-text=
and in italian forum : https://translate.google.ro/transla...mate-7-rescue-mode.html#post344249&edit-text=
You got lucky because you got your money back. What did you told them what happend with the phone? You told them the truth or something else?
If you can live without root you can get another mate 7.
alexre123 said:
Hi Ezerche. I'm so sorry your phone got bricked and you couldn't repair... I don't know how to root and I couldn't help you. What did you do wrong? I saw on this forum other users who had successfully rooted mate 7.
Now I think I will never root this phone, my 30 days return policy has expired. SO there was no way to repair your phone?
I found your problem on an chinese forum: https://translate.google.ro/transla....vmall.com/thread-3432260-1-1.html&edit-text=
and in italian forum : https://translate.google.ro/transla...mate-7-rescue-mode.html#post344249&edit-text=
You got lucky because you got your money back. What did you told them what happend with the phone? You told them the truth or something else?
If you can live without root you can get another mate 7.
Click to expand...
Click to collapse
Hi Alex,
I have rooted my phone, problem happened while i am wiping the boot, system and cust from CWM Recovery before the install new rom. I think its deleted something about sensors (on chinese forum they talking about iom3 error is related with sensors)
So phone didnt boot again.
I returned it to seller without any excuse. I just said I didnt satisfied with the phone. And they accept return and paid the money back in same day.
HELP
my mate 7 in bootloop i haven't unlock botloader, i can access to recovery mode (stock) and fastboot mode only, i try to unlock boot loader on the site of HUAWEI without success it always said 'this HUAWEI ID has not been used on this device for more than 14 ays'
how can i fix this problem help me please
Thanks a lot.
hi guys no one helps me???
please help i haven't found solution
after long time searching the web and googling try chinese web sites and other english forums, sending mails in english chinese.... NOTHING RIEN NADA
i'm so disappointed my phone still not working and i'm so frustrated to see that no one gives me an answer!!!?
Here in the türkish Forum is your solution
http://turkpda.com/konu/huawei-ascend-mate-7-bootloader-kilit-kodu-alma-yeni-yoentem.1137/
http://turkpda.com/konu/huawei-ascend-mate-7-bootloader-kilidini-acma.876/
so, was your problem solved?
Skorpi58 said:
Here in the türkish Forum is your solution
http://turkpda.com/konu/huawei-ascend-mate-7-bootloader-kilit-kodu-alma-yeni-yoentem.1137/
http://turkpda.com/konu/huawei-ascend-mate-7-bootloader-kilidini-acma.876/
Click to expand...
Click to collapse
i have read the thread in english, in french (using google translate) but i didnt understand my phone doesnt boot, so how can i install kingroot.apk or honortuner.apk ???
my big problem is that i used my phone with HUAWEI-ID for only 3 three days so i can't have yhe unlock code from huawei official website :crying:
smich_ayane said:
i have read the thread in english, in french (using google translate) but i didnt understand my phone doesnt boot, so how can i install kingroot.apk or honortuner.apk ???
my big problem is that i used my phone with HUAWEI-ID for only 3 three days so i can't have yhe unlock code from huawei official website :crying:
Click to expand...
Click to collapse
if you can't open your device it's a big problem
try this
if bootloader never unlocked before.......
try download last version hisuite 4.0 and connect phone to laptop via usb .... keeping
press down values and power together until you see fastboot mode
in hisuite click SYSTEM RECOVERY let hisuite complete flash rom automatically
xda-luffy said:
if bootloader never unlocked before.......
try download last version hisuite 4.0 and connect phone to laptop via usb .... keeping
press down values and power together until you see fastboot mode
in hisuite click SYSTEM RECOVERY let hisuite complete flash rom automatically
Click to expand...
Click to collapse
where the link for hisuite 4.0?
orly1001 said:
where the link for hisuite 4.0?
Click to expand...
Click to collapse
m.huawei.com/zamobile/consumer/support/search/index.htm?proid=Jazz-TL10&proKey=Mobile%20Phones/Smartphones/Jazz-TL10
xda-luffy said:
m.huawei.com/zamobile/consumer/support/search/index.htm?proid=Jazz-TL10&proKey=Mobile%20Phones/Smartphones/Jazz-TL10
Click to expand...
Click to collapse
hisuite cannot detect my HAM 7,it is in fasboot recover mode and below is phone locked written in green color,TIA
orly1001 said:
hisuite cannot detect my HAM 7,it is in fasboot recover mode and below is phone locked written in green color,TIA
Click to expand...
Click to collapse
hisute must be detected HAM 7 ... try again and click SYSTEM RECOVERY >>>>>>>after a few seconds click RESUME button
if that not help must be find a way to unlock bootloader and flash system.img boot.img recovery.img in the same you are version damaged
xda-luffy said:
hisute must be detected HAM 7 ... try again and click SYSTEM RECOVERY >>>>>>>after a few seconds click RESUME button
if that not help must be find a way to unlock bootloader and flash system.img boot.img recovery.img in the same you are version damaged
Click to expand...
Click to collapse
how?please help even i will pay you just to to work my mobile again. my mobile show below of android logo is phone locked and rescue mode enter.
---------- Post added at 04:29 PM ---------- Previous post was at 04:26 PM ----------
xda-luffy said:
hisute must be detected HAM 7 ... try again and click SYSTEM RECOVERY >>>>>>>after a few seconds click RESUME button
if that not help must be find a way to unlock bootloader and flash system.img boot.img recovery.img in the same you are version damaged
Click to expand...
Click to collapse
after i click resume button shows recover and when i click recover it show your device is not supported for system recovery
Same problem here
There is no solution to this problem. I hope that if Huawei launches the official Marshmallow firmware, then we would be able to rectify this problems.. Otherwise I tried a lot but no results.. Best of Luck...
If u find any solution.. plz do let me know...
smich_ayane said:
HELP
my mate 7 in bootloop i haven't unlock botloader, i can access to recovery mode (stock) and fastboot mode only, i try to unlock boot loader on the site of HUAWEI without success it always said 'this HUAWEI ID has not been used on this device for more than 14 ays'
how can i fix this problem help me please
Thanks a lot.
Click to expand...
Click to collapse
For information "one-key recovery" method throw hisuite 4.0 needs unlock bootloader i have already try it without result so if some one have another idea he's welcome
This is exactly my problem, where i had flashed the update of Marshmallow, and it seems it wasn't correct. Now it is on boot loop and can't recover in fastboot. there should be a solution !! surprised even i can't shut it down, did they think about these kind of problems?
I have same problem
someone help me
how can I obtain unlock code??!!!!!!
Big_lord said:
I have same problem
someone help me
how can I obtain unlock code??!!!!!!
Click to expand...
Click to collapse
i have a simple solution. Lunch Hisuite. connect your phone to the system with cable. Hold power + vol up + vol down botton all at the sample time. Phone will vibrate, and will show huawei logo. now, let go of the three bottons. Huawei software update will lunch automatically and will start download...
oserib said:
i have a simple solution. Lunch Hisuite. connect your phone to the system with cable. Hold power + vol up + vol down botton all at the sample time. Phone will vibrate, and will show huawei logo. now, let go of the three bottons. Huawei software update will lunch automatically and will start download...
Click to expand...
Click to collapse
it's not worked
Get bootloader unlock code from dc-unlocker.com. it costs you 4 euro.
Sent from my JAZZ using XDA Free mobile app
IF I OPENED THIS THREAD AGAIN SRY , I DIDN'T SEE
i have a problem with my phone ( Huawei g620s-l01 )
he is on FASTBOOT&RESCUE MODE and it says green words PHONE Locked under the android logo
when i press +,-,Power button , he goes into the fastboot menu , i did factory reset , but all is the same ..
Then i try to flash new firmware(stock) on it , i download firmware on official huawei site UPPDATE.APP and dload folder , i move this in sd card , press +,-,power and get into fastboot menu, and update is automaicaly begin , but i get this errors
1.
checking sd update pkg...
file:/sdcard/dload/update.app.size=1290100572
oemsbl version list check error!
0* ,write data error
Error:update.app is a invalid package
Error:SD card update failure, SD card update abort!
i google about that and found that i cant do downgrade , but i just trying to "reinstall stock system"
can anyone send me a link to try another file to install ?
error 2.
i was looking for this error and it says i must have unlocked bootloader
i registered in huawei official website and click to unlock code .
he give me to fill; IMEI , Serial number , Product number, Product model ,Product ID, etc ..
but i can't get Product ID because i can't use the phone to call Product ID to show on screen
so i cant get unlock code .... to unlock bootloader and then try installing UPDATE.APP..
error 3.
I installed all drivers for this device , adb drivers , fastboot , usb , etc ...
but when i type etc.(adb reboot bootloader) shows :
error : device '<null>' not found
but i installed drivers , turn phone on (fastboot&rescue mode) and connected to PC.
PLEASE ANYONE HELP ME
1. find bootloader unclock code - if i need it for install UPDATE.APP from dload folder -if bootloader is a problem
2. resolve drivers problems
3. install "UPDATE.APP" from dload folder - if it's different installation
i cant use my phone about 4 days now please help me
SRY FOR MY BAD ENGLISH , IM FROM SERBIA I DO NOT COVER MUCH ENGLISH
if anybody needs more information to help me PLEASE SAY ...
thanks in advance
i need g620s l01 scatter file
I have the same problem You have solved?
Thanks
bye bye
Hi guys, please help me with huawei id on this phone, i try everything i have found, but nothing of solutions didnt work. Sorry my bad english i hope u understand me and thanks to all who give me answer.
lcanl said:
Hi guys, please help me with huawei id on this phone, i try everything i have found, but nothing of solutions didnt work. Sorry my bad english i hope u understand me and thanks to all who give me answer.
Click to expand...
Click to collapse
Whats your problem?
Lukke2804 said:
Whats your problem?
Click to expand...
Click to collapse
My problem is huawei id, i need to erase id.
clear data for hi APp, Huawei apps etc or just do factory reset all will go away
shashank1320 said:
clear data for hi APp, Huawei apps etc or just do factory reset all will go away
Click to expand...
Click to collapse
Factory reset is done but huawei id dont erase.
lcanl said:
Factory reset is done but huawei id dont erase.
Click to expand...
Click to collapse
Talking about app or app data for it..app wont go with factory reset and need to root and disable manually
shashank1320 said:
Talking about app or app data for it..app wont go with factory reset and need to root and disable manually
Click to expand...
Click to collapse
Sorry but client dont know about this, so he done factory reset without cleaning id and appdata, phone is on activation now.
Unable to Get Phone ID
I am unable to get my Honor 8 phone ID which I require to 'unlock' the bootloader as the phone will NOT start up into Android. It boots to the point where it asks for the Region, then Language, then WiFi, etc and then it goes back to the beginning, THUS Region, Language, WiFi, etc. but it never boots into Android as a result I am not able to check the Phone ID or to enable anything like USB debugging, etc.
What I have done to get to this point:
The phone updated > it seems like the update was unsuccessful as it got stuck in a loop where it would ONLY boot to the Huawei eRecovery.
Then I read a post to 'roll-back' to the earliest version (FRD-AL10...135) which I did and then from the SD Card installed the stock firmware (update.app) by using the Pwr+Volme UP+Volume Down buttons. It succeeded to install the stock firmware and ever since then I am stuck at the Region, Language, WiFi, Terms Agreement,etc - BUT it never gets past the selection - it just loops over and over.
I have again installed the stock firmware as above, but it fails to start and continuously gets stuck at the Region, Language, etc selections.
Could anyone please provide help if possible.
All the other posts I read, I need the 'bootloader' to be unlocked, BUT I am unable to get the Phone ID to get the UNLOCK code.
I have also read some posts which suggests I use 'adb' and 'fastboot' to 'recover' the phone to stock firmware, BUT I constantly get an error - "FAILED - Remote: Command not allowed".
So at this point I am not sure how to go any further.
PS: I have also had the phone to my local Huawei Service Centre, but they refuse to help me with the Honor 8 as I did not buy it in S-Africa.
Equalibrium_tdb said:
I am unable to get my Honor 8 phone ID which I require to 'unlock' the bootloader as the phone will NOT start up into Android. It boots to the point where it asks for the Region, then Language, then WiFi, etc and then it goes back to the beginning, THUS Region, Language, WiFi, etc. but it never boots into Android as a result I am not able to check the Phone ID or to enable anything like USB debugging, etc.
What I have done to get to this point:
The phone updated > it seems like the update was unsuccessful as it got stuck in a loop where it would ONLY boot to the Huawei eRecovery.
Then I read a post to 'roll-back' to the earliest version (FRD-AL10...135) which I did and then from the SD Card installed the stock firmware (update.app) by using the Pwr+Volme UP+Volume Down buttons. It succeeded to install the stock firmware and ever since then I am stuck at the Region, Language, WiFi, Terms Agreement,etc - BUT it never gets past the selection - it just loops over and over.
I have again installed the stock firmware as above, but it fails to start and continuously gets stuck at the Region, Language, etc selections.
Could anyone please provide help if possible.
All the other posts I read, I need the 'bootloader' to be unlocked, BUT I am unable to get the Phone ID to get the UNLOCK code.
I have also read some posts which suggests I use 'adb' and 'fastboot' to 'recover' the phone to stock firmware, BUT I constantly get an error - "FAILED - Remote: Command not allowed".
So at this point I am not sure how to go any further.
PS: I have also had the phone to my local Huawei Service Centre, but they refuse to help me with the Honor 8 as I did not buy it in S-Africa.
Click to expand...
Click to collapse
Dload the same firmware which you had before b135
shashank1320 said:
Dload the same firmware which you had before b135
Click to expand...
Click to collapse
It is impossible to determine which firmware the phone had before it broke as I imported the phone from China, and I did not have a reason to unlock the phone before it broke, hence the reason I did not have a need for the Product ID when the phone functioned properly, it is only after it broke that I had to have access to all this information in an attempt to get it back to a functioning state. That being said, the phone worked perfectly for a week until it did an OTA 'update', when the phone restarted I was presented with all kinds of trouble.
I have since been able to start the phone up in Android after I had to buy DC-Unlocker credits to get the phone to boot properly. UN-locking the phone via DC-Unlocker, unlocked the FRP and only thereafter I was able to unlock the bootloader and root the phone, and get access to USB debugging settings, etc.
Hi, I'm Youssef
My Story
A lot of people bricked their Honor 8 Lite / Huawei P8 Lite 2017 / Huawei GR3 2017
In my case I flashed an OEMinfo image from TWRP and it bricked my phone rendring it useless
Cause my Bootloader and FRP were Locked and TWRP was my Recovery but I couldn't access it
When I go to the eRecovery and try to Download Latest Version And Recovery it gave me an error that says Getting Package Info Failed
Also the Dload method doesn't work
I did a little bit of research and saw that the only way to restore my phone was by paying an application called DC Unlocker
But I found out a way to install the Frimware without errors from eRecovery
Prerequisites
•Any Android Device
•Router
•Your P8 Lite 2017 Has To Be Charged Fully
•Download Huawei Frimware Finder From Playstore
Instructions
1-Open Frimware Finder and press on add another model after that enter your phone's model
2-Choose the oldest frimware and make sure it's Full-OTA
3-Click on Get Update Via DNS
4-Click on Copy DNS Address
5-Click on Register Update
6-Go to your Router DNS Settings and type in it the DNS you received from Frimware Finder
7-Save the settings
8-Boot your P8 Lite 2017 to eRecovery and click on Download Latest Frimware And Recovery
9-It will find the frimware you chose from Frimware Finder after that go to your Router DNS Settings and Remove the DNS you pasted
10-Your phone will download the frimware normally and install it
Don't forget that thanks button.. It's Free
I don't have a router. I can only share the wifi hotspot of my other mobile to the bricked honor 8 lite. Is there any solution for me?
Will apps which change dns by proxy work?
@YoussefR
Everyone who has bricked his/her device and has given up hope,
Don't use DC Phoenix, this actually works, I fixed my 2-month-bricked phone with this. If anyone needs help following this guide, just PM me and I will try my best to help you.
Salman Farooq01 said:
Everyone who has bricked his/her device and has given up hope,
Don't use DC Phoenix, this actually works, I fixed my 2-month-bricked phone with this. If anyone needs help following this guide, just PM me and I will try my best to help you.
Click to expand...
Click to collapse
I'm sorry can you help me when i put dns in the router and go to download the update from erecovery it's not working says getting package info failed
Abdala2307 said:
I'm sorry can you help me when i put dns in the router and go to download the update from erecovery it's not working says getting package info failed
Click to expand...
Click to collapse
another way to change dns of router:
#1. Enable "telnet" from control centre>programs...>turn windows features on/off
#2 Type this in windows+R dialogue:
"telnet xxx.xxx.xxx.xxx" (your original dns)
Then hit enter, give it its username and password of router and run commands:
>dns config static 81.177.139.39 81.176.139.39
>save
(Or whatever firmware finder tells you to change it to)
Then reboot router.
Also, press egister update on firmware finder app (which is on another phone connected to the same wifi network) before changing dns, after changing dns before rebooting and after rebooting router (basically, press register update as many times as you can )
That's what worked for me.
Should i pick the oldest firmware or what I'm sorry?
Abdala2307 said:
Should i pick the oldest firmware or what I'm sorry?
Click to expand...
Click to collapse
Oldest
YoussefR said:
Hi, I'm Youssef
My Story
A lot of people bricked their Honor 8 Lite / Huawei P8 Lite 2017 / Huawei GR3 2017
In my case I flashed an OEMinfo image from TWRP and it bricked my phone rendring it useless
Cause my Bootloader and FRP were Locked and TWRP was my Recovery but I couldn't access it
When I go to the eRecovery and try to Download Latest Version And Recovery it gave me an error that says Getting Package Info Failed
Also the Dload method doesn't work
I did a little bit of research and saw that the only way to restore my phone was by paying an application called DC Unlocker
But I found out a way to install the Frimware without errors from eRecovery
Prerequisites
•Any Android Device
•Router
•Your P8 Lite 2017 Has To Be Charged Fully
•Download Huawei Frimware Finder From Playstore
Instructions
1-Open Frimware Finder and press on add another model after that enter your phone's model
2-Choose the oldest frimware and make sure it's Full-OTA
3-Click on Get Update Via DNS
4-Click on Copy DNS Address
5-Click on Register Update
6-Go to your Router DNS Settings and type in it the DNS you received from Frimware Finder
7-Save the settings
8-Boot your P8 Lite 2017 to eRecovery and click on Download Latest Frimware And Recovery
9-It will find the frimware you chose from Frimware Finder after that go to your Router DNS Settings and Remove the DNS you pasted
10-Your phone will download the frimware normally and install it
Don't forget that thanks button.. It's Free
Click to expand...
Click to collapse
Dude you literally saved my day.
This worked perfectly on a View10. I had the frp lock issue, no fastboot flash available, no adb, read only system in twrp, no working wifi and other stuff.
With the steps above i flashed the latest full working stock image.
Even FRP is unlocked now.
Thanks.
Hi after that Guide my Phone bricked total
Starts Download, starts installing and shut down approx 80%.
Screen black, no response, no charging only Fastboot detection with black screen by connect with PC
OEM Locked, FRP Lock
eifeldragon said:
Hi after that Guide my Phone bricked total
Starts Download, starts installing and shut down approx 80%.
Screen black, no response, no charging only Fastboot detection with black screen by connect with PC
OEM Locked, FRP Lock
Click to expand...
Click to collapse
This can only be if you used the wrong Firmware, which doesn't match your device
eifeldragon said:
Hi after that Guide my Phone bricked total
Starts Download, starts installing and shut down approx 80%.
Screen black, no response, no charging only Fastboot detection with black screen by connect with PC
OEM Locked, FRP Lock
Click to expand...
Click to collapse
You need premium flashing tool/service to solve that problem.
I did resolved exactly same bricked condition with DC Phoenix, paid services..
You can try Miracle/Sigma/others Huawei flasher box/tools.
My Phone is back
DC Phoenix was the right way, flashed with errors but it starts again and i can use erecovery.
Thanks
Hello, with this method, i still have "getting package info failed". Since i can't change DNS on my box (it's Orange, in France, and i'm not allowed to change DNS ...) i try to do this trough an old phone connected directly on mobile network, then share a connection with my view 10. I try to change DNS with DNS changer app, and put DNS give by Firmware Finder, but still have an error. Can someone help me ?
I think i choose the right firmware (BKL-L09, it's international version of honor view 10), but i've still have a doubt if i shoul chose C432 or C636 version... I can't have access to my phone, when i try to boot, he is stock on "wait a second" step.
Thx in advance for help
YoussefR said:
Hi, I'm Youssef
My Story
A lot of people bricked their Honor 8 Lite / Huawei P8 Lite 2017 / Huawei GR3 2017
In my case I flashed an OEMinfo image from TWRP and it bricked my phone rendring it useless
Cause my Bootloader and FRP were Locked and TWRP was my Recovery but I couldn't access it
When I go to the eRecovery and try to Download Latest Version And Recovery it gave me an error that says Getting Package Info Failed
Also the Dload method doesn't work
I did a little bit of research and saw that the only way to restore my phone was by paying an application called DC Unlocker
But I found out a way to install the Frimware without errors from eRecovery
Prerequisites
•Any Android Device
•Router
•Your P8 Lite 2017 Has To Be Charged Fully
•Download Huawei Frimware Finder From Playstore
Instructions
1-Open Frimware Finder and press on add another model after that enter your phone's model
2-Choose the oldest frimware and make sure it's Full-OTA
3-Click on Get Update Via DNS
4-Click on Copy DNS Address
5-Click on Register Update
6-Go to your Router DNS Settings and type in it the DNS you received from Frimware Finder
7-Save the settings
8-Boot your P8 Lite 2017 to eRecovery and click on Download Latest Frimware And Recovery
9-It will find the frimware you chose from Frimware Finder after that go to your Router DNS Settings and Remove the DNS you pasted
10-Your phone will download the frimware normally and install it
Don't forget that thanks button.. It's Free
Click to expand...
Click to collapse
My device is LLD-AL10 In firmware finder old full ota isnt find.. my version is 8.0.0.160(c675).... 8.0.0.177 is available.... What can i do???
phone locked / FRP unlocked
i want to unlock the bootloader i just wanna root my device on it's stock rom what should i do? please guys i need help...
note: can't get my bootloader code because huawei banned it