Hay guys i'm from South Africa and don't know a lot of people that works with there phone's the way i do over here not a lot of people here wants to educate themselves to explore deeper in their phones,I'm a bit of a noob guys i was flashing my Huawei mate 8 NXT-L29 im not sure what stock Rom was installed but the emui was 4.0 and rooted,i flashed the recovery 1(firmware flash thru EXTsdcard) and recovery 2(erecovery ?)with custom recovery's that was meant to be custom for the mate 8 but i guess for a different emui and i flashed the BOOT.IMG with a custom BOOT.IMG,now my device is stuck in RESCUE MODE...I got it to boot up so it doesn't display the error-Func NO : 10 (boot image) and Error NO : 2 (load failed!) by restarting the device and plugin in usb cable while holding volume down button but then it shows in Green Device Locked ....i'm not good at all with this guys i used to have a Samsung J5 that was much easier to handle while Rooting so please any solution on this i would be so great-full...i don't even know how adb works,i tried to find info on internet but got nothing please help guys
MOnomono456 said:
Hay guys i'm from South Africa and don't know a lot of people that works with there phone's the way i do over here not a lot of people here wants to educate themselves to explore deeper in their phones,I'm a bit of a noob guys i was flashing my Huawei mate 8 NXT-L29 im not sure what stock Rom was installed but the emui was 4.0 and rooted,i flashed the recovery 1(firmware flash thru EXTsdcard) and recovery 2(erecovery ?)with custom recovery's that was meant to be custom for the mate 8 but i guess for a different emui and i flashed the BOOT.IMG with a custom BOOT.IMG,now my device is stuck in RESCUE MODE...I got it to boot up so it doesn't display the error-Func NO : 10 (boot image) and Error NO : 2 (load failed!) by restarting the device and plugin in usb cable while holding volume down button but then it shows in Green Device Locked ....i'm not good at all with this guys i used to have a Samsung J5 that was much easier to handle while Rooting so please any solution on this i would be so great-full...i don't even know how adb works,i tried to find info on internet but got nothing please help guys
Click to expand...
Click to collapse
If you installed a boot that was not for your phone. you've ruined broken memory
elcoya06 said:
If you installed a boot that was not for your phone. you've ruined broken memory
Click to expand...
Click to collapse
so it cant be fixed???
Related
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Asdforcer said:
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Click to expand...
Click to collapse
Hi, Thanks for using XDA assist.
It looks like there is no dedicated forum for your device, however
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck
I've been trying to root my phone for the last few days, everything just seems to be going badly.
I was finally able to unlock the bootloader, and i wasn't able to flash TWRP
after trying to get it to work and faffing around in recovery. I some how have got my phone in an endless loop. But not just an endless loop, but after the phone logo comes up, my phone's screen goes all glitchy and crazy with loads of colour. I can go into fastboot mode all ok, but now i can't access recovery mode anymore it's the same as normal mode.
I have no idea what's going on
i can't flash anything, when i do i get the message USB Transferring ... USB Transmission OK
Hi !
This looks like a soft brick but can you tell us more about your device ( model , software ) ?
Thank you
It's a BLU Vivo 6. it runs android marshmallow
AHappyLittleFishy said:
It's a BLU Vivo 6. it runs android marshmallow
Click to expand...
Click to collapse
Hi !
Some devices just can`t be unlocked without a prover support from the manufacturer
You can search for more on Google and wait for development , your case is far from unique
I see that you have alredy posted same issue here
https://forum.xda-developers.com/an...oot-device-t3546400/post70765622#post70765622
Thread closed
Hi, I have a great problem: after installing the TWRP recovery 3.1.0 in my Oukitel U22, my system has disappeared and when I restart the phone starts in recovery mode. How can I reinstall a ROM (unroot) or a LineageOS, with TWRP? Thank you very much and best regards, Rino.
I use Fedora GNU/Linux OS
you must when phone is off mode and connect to usb . not in recovery mode.
spflash tool use .
U22 Oukitel Roundhouse Flying HeadACHE! FOR ROUTE 666
tmp5121 said:
you must when phone is off mode and connect to usb . not in recovery mode.
spflash tool use .
Click to expand...
Click to collapse
Hi, ive been trying for a long time with failure after failure with Magisk TWRP an now looked up a way using spflash (cant find firmware * as android 7 doesnt work with commandlines anymore for root??? i dont know enough to know why or whats what... but i would rly rly rly love AND Greatly APPRECIATE Some help with rooting this android 7 U22 oukitel ... Anyone..someone Plz PLZ PLLLLLLZZZZZ HELP ME ROOT THIS THING! ... * ... Everytime i want to do something like otg for example it seems i need root.. when i had it on my old phone i did not REALISE HOW MUCH I MISS IT *:'( .... ANYHELP RLY APPRECIATED! XDA SAVE ME FROM THIS KILLER ROUNDABOUT HEADACHE LOL!
Hello i own a brand new ulefone s8 pro bricked after ota update failure i donwloaded the rom from ulefone site and managed to flash it but still bootlooping for about 10 minute and then turning off , i did a donwload only + firmware upgrade and even a format all + download but still bootlooping , i tried to flash twrp but it wont and then tried unlocking bootloader but it failed im really desperate is it a really a software issue or it may be a hard one? Plz help me im begging you
Hello all i have mate 8 l29c185 and i changed region to c432 and then i flashed a l29c432b584 on my phone and every was ok. But due to high battry consuption i wanted to downgrade my phone to marshhmelow then i flashed c500 rollback after that my phone comig up and then i flashed c432b330to my ohone with 3bottom way in Sd card. But after updating phone stack and nothing hasn't work either) it just whrite in the "Your device has been unlocked and can't be trusted screen" with a message "Your device is booting now". And aslo i can not power off the phone.i tryed to going my phone to fast mode and it went in fast mode .i tried a lot of firmware with uawei firmware extract to flash boot.img system.img recovert.img and cust.img via adb and etc.the flash process have been completed but in my phone nothinf happen and stay on Your device is booting now"... pleas help me.i tried firmware such az c432b330 c423b200 c432b584 c185b320 c185b560 ...i dont know what shuold i do..
My mail is;[email protected] plsead help me
No body can help me???????
silentflight288 said:
Hello all i have mate 8 l29c185 and i changed region to c432 and then i flashed a l29c432b584 on my phone and every was ok. But due to high battry consuption i wanted to downgrade my phone to marshhmelow then i flashed c500 rollback after that my phone comig up and then i flashed c432b330to my ohone with 3bottom way in Sd card. But after updating phone stack and nothing hasn't work either) it just whrite in the "Your device has been unlocked and can't be trusted screen" with a message "Your device is booting now". And aslo i can not power off the phone.i tryed to going my phone to fast mode and it went in fast mode .i tried a lot of firmware with uawei firmware extract to flash boot.img system.img recovert.img and cust.img via adb and etc.the flash process have been completed but in my phone nothinf happen and stay on Your device is booting now"... pleas help me.i tried firmware such az c432b330 c423b200 c432b584 c185b320 c185b560 ...i dont know what shuold i do..
My mail is;[email protected] plsead help me
Click to expand...
Click to collapse
try erecovery option or use multi-tool8 to unbrick